Original and inexpensive fences for garden beds. Budget fencing of a flower bed made of wood and plastic bottles from noparapone

Fencing for garden beds is not only an element of landscape design. This decoration is very practical, and sometimes necessary, for example, if a garden with raised beds is planted on loose soils, or “warm beds” technology is used.

Plastic fences

A plastic border is convenient for framing beds of an unconventional shape - rounded, winding, curvilinear. It is also ideal for multi-tiered beds. Such a fence is very easy to install - no need to dig ditches or holes to secure it, just drive in special pins or just stick it into the ground. Plastic borders are resistant to moisture and solar radiation. The influence of temperature changes also does not cause much harm to them. Another advantage is that the fence can be removed and rearranged if necessary.

Usually plastic garden tapes are used if you do not need to draw attention to the fence, but sometimes you can find a fence in bright colors. Such a curb does not heat up to high temperatures, so the plants will not suffer from burns.

garden border The "labyrinth" is well suited if turf grasses or ground cover plants are used as a covering for the paths between the beds. Due to the presence of a ledge along its edge, a lawn mower can be used to process the paths - there will be no uncut grass left. Such a curb will prevent unwanted growth of grass on the paths. It looks like a fence like a curb made of stone.

Decorative plastic fencing for beds to some extent protect them from spilling, but their main function is to decorate the garden. They are available in both natural and vibrant colors.

Metal borders for beds

Sometimes to create high beds, beds-greenhouses and multi-tiered structures are used metal fences with polymer coated. Installing them is as easy as installing plastic curbs. They will perfectly emphasize the design of the beds. unusual shape. On the solar beds such a border should be installed with care - it heats up quite strongly in the sun and can damage the plants.

Wooden borders for beds

The most traditional option for framing the beds - various designs from wood. For a vegetable garden rustic style a stump border or a low wattle fence is great. You can decorate the garden bed by installing saw cuts of wood around its perimeter.

The most simple wooden fencing- boards laid around the perimeter of the beds. Such a fence is quite functional - with correct installation the soil is practically not washed out. Although such a curb is short-lived, it is easy to repair. Using for fastening boards and their connection various decorative elements, you can give the garden a very unusual and sophisticated look.

The railings look very decorative. terrace board. However, the cost of such a border for the beds is quite high. interesting view beds can be given with the help of fences made of wooden slats.

It is advisable to treat wooden fences with antiseptics or paint, then they will last longer and retain an attractive appearance.

Fences for beds from improvised materials

Very beautiful borders for beds can be made from what many consider garbage - the remains of building materials, glass or plastic bottles, cans. Not so long ago, slate fences were in vogue. They look beautiful in the landscape, are easy to install, but their harmlessness is questionable.

Diversity plastic containers gives room for imagination in its application in landscape design. To make bottle fences stronger and more durable, it is advisable to fill them with earth or sand.

Borders from transparent materials can be illuminated with LEDs or fiber optics so that the beds look beautiful in the evening.

When arranging a garden, do not neglect the borders. Garden fences play important role in the aesthetics of the garden, and are indispensable for the convenience of its processing.

In order to receive good harvests horticultural crops, modern summer residents, owners of personal plots work hard and hard. It is very important for them to know what beds can be made of - this will be the key to increasing the efficiency of household farming. The use of special soil, well-chosen fertilizers, nutrients, correct form, construction of beds, use optimal materials for their arrangement - all this in a complex will give a positive result, provide a plentiful, rich harvest.

A thoughtful approach to the construction of rabatok fences will greatly simplify crop care activities. To ensure order in your own personal plot, you need to create beautiful garden beds with sides - the neat rows of plants planted here will be very comfortable. This will immediately affect the quality of the crop. Properly equipped fencing is guaranteed to prevent the loss of soil nutrients during irrigation or precipitation.

Fencing beautiful beds with their own hands, the owner of the site will exclude the creation of streaks, dirty puddles.

Fertilizers, peat, ash in the beds will not be washed away by rain, which is very important for cultivated plants. It is not at all difficult to protect the beds with your own hands - step by step manufacturing structures can be studied thoroughly in advance. This will stop the growth and spread of weeds by limiting the planting area.

Thanks to the digging in of enclosing elements with a certain depth, it is possible to save cultivated plants from annoying weeds - perennials, since the sides of the beds successfully play the role of insurmountable obstacles. Thinking about what you can make beds in the garden, you need to pay attention to the aesthetic design of the site. Beautifully framed ridges with thoughtful borders, separated from clean, well-groomed paths - that's what you need.

The right choice of barrier materials

To create functional fences for beds, you will need to resort to the use of certain materials: brick, rubble stone, sheet metal, plastic panels, curb tape, lumber, slate, asbestos-cement sheets. Bottles made of glass, plastic, car tires, etc. may also be involved. available materials, products. The gardener will have to decide which option would be preferable for him: spend money on buying materials from the first group or be satisfied with the use of practically free improvised products.

Metal fences are characterized by high resistance to mechanical damage.

Unfortunately, over time, corrosion from moisture can cause significant damage to metal bumpers. To prevent this from happening, the owner of the garden will need to periodically paint the contour sides using special protective compounds. On the cultivated plants may be adversely affected by the heating of the metal under bright sun. For this reason, the gardener should not plant crops close to the sides. It is not so rare that land owners use ready-made beds with a polymer coating - beautiful and ergonomic. They are made from metal profile with a protective layer applied.

The natural wood used for the enclosing structures of the beds has a high environmental safety. When constructing beds for strawberries from boards, you need to be prepared for the fact that you will have to periodically (every few seasons) change the installed curbs that have become unusable. This is explained negative impact on wood water, damp earth, bacteria, fungus. The size of the beds from the boards is influenced by the standard indicators of the length of the lumber.

To protect the wood for a certain period, the gardener will need to process it with special antiseptic, coloring agents. With imagination, beautiful beds decorated with their own hands made of wood can give the landscape of the site a special “zest”. As an alternative, a WPC board for beds can be chosen, the service life of which is not an example higher, and the aesthetic qualities are completely impeccable.

Functional garden beds plastic bottles you can create it yourself almost for free. To install the bottles, they will need to be sequentially dug along the edges of the ridges, initially breaking off the direction line of the side with a string stretched over pegs. The strength of the bottle fence is not very high. Bottles are often knocked out of the rows, subjected to deformation, from the impact external factors become cloudy, dirty, which cannot but affect general view garden, backyard.

Having chosen fences from rubble stone, there is no doubt - design backyard landscape will only benefit from this. It should be noted that the laying of this expensive material is labor intensive and expensive. If there are natural stone deposits in the immediate vicinity of the site, this will significantly reduce the cost.

The use of budget plastic panels is becoming more and more popular today with gardeners who want to form vegetable ridges. Such structures do not need excessive moisture, rot, mold, frost, sun, precipitation. Due to the low weight, transportation pvc panels won't be a problem. Open them, installation can be carried out even by an inexperienced person.

To give a vegetable garden, flower garden, flower bed a complete appearance, the owner of the site can frame them using a curb tape. Modern manufacturers offer consumers many colors of such products. High-quality border tape has high strength, reliability, it is easy to cut, install, well suited for the construction of beds of various configurations. Among the negative features of such a material made of plastic, it is worth noting its low resistance to negative temperatures.

Equipping the beds, the gardener will have to adopt certain rules. This will provide best development plants, will help reduce costs, labor intensity of work, save time, will cause more high yield cultures. Square beds have proven themselves very well - they are easy to process, water, have compact size. This does not mean at all that the gardener should abandon rectangular, round ridges, ridges of arbitrary shape - they can also be built depending on the preferences of the owner of the site.

The optimal dimensions of the beds, recommended by experienced gardeners, are as follows:

1. Width: 80 - 90 cm.
2. The length can be any (it is affected by the dimensional indicators of the site as a whole). It is worth noting that maintenance, watering too long beds can be problematic. As a result, the recommended parameters for the length of the ridges should be in the range: 4 - 6 m.
3. Height: 10 - 15 cm (this data applies to optimal height sides).

High, bulk beds - effective solutions for any garden

The designer beds of the box with high sides (about 90 cm high) have proven themselves well. Due to the high frame design, they are easy to process, since the gardener does not have to constantly bend over, carrying out weeding, caring for plants. These can be cucumber beds, planting sites for peppers, peas, herbs and other crops.

During construction, experienced gardeners practice laying a layer of cardboard or geotextile on the bottom of structures. This becomes a reliable obstacle to the growth of weeds. To prevent rodents from getting inside, the bottom of the bed can be closed using a metal mesh with small cells (1 x 1 cm).

Thinking how to do bulk bed, the owner of the site should not forget about the drainage layer, arranged under the fertile soil. It makes sense to choose brick, crushed stone, etc. as drainage materials. Also, it is allowed to use large wood waste, which remain when uprooting shrubs on the site, sunflower stalks, straw, large poorly rotting debris. The drainage layer will justify itself if its height is in the range of 15 - 40 cm and will be correlated with the total height of the bed being built.

A multi-tiered garden bed is a great option if you need to save space

With a lack of space on the site, the owners often try to make multi-tiered beds with their own hands in order to save valuable space and get at their disposal additional space for landing. This is justified not only when growing garden crops, but also provides unlimited opportunities for experimenting with flower arrangements.

Multi-tiered bed for strawberries

A warm bed is a guarantee of an early harvest

When deciding how to prepare a warm bed, the gardener can install high sides of the fences. This will allow the arrangement of a layered hot ridge used as a greenhouse. Here it will be possible to easily set arc structures to stretch the film. In finished form, such a bed will not disappoint the owner, its use will bring good harvests of early crops.

A living garden, equipped by a gardener, also called “warm”, is guaranteed to be fruitful. This option is especially good for early spring when temperatures are not quite suitable for crop development. At the same time, building necessary frame, having prepared the filler, reliably covering the plants, you can count on the best result.

Properly chosen colored or black covering material for beds - agrofibre will significantly increase the yield of crops, protect plants from frost, strong ultraviolet rays, infection by fungus, pests, weeds. The polymer material very easy to use, it has high strength characteristics, light weight. Due to the unique "breathing" properties of the material, the cultures covered under it will feel extremely comfortable - they will not wither, they will develop well.

Modern gardeners are happy to experiment, not only in pursuit of the goal of obtaining high yields, but also trying to breed the most different cultures, mass landing which are not practiced. Also, many people like to get the opportunity to grow greens, vegetables, mushrooms at home using commercially available kits and installations.

Today, the mushroom garden is becoming more and more popular. Just add water, the purchase of a kit of which can be easily afforded by anyone. By following the instructions correctly, you can achieve impressive results and pamper your household with delicious oyster mushrooms.

Original home hydroponic garden onion happiness practically all year round will provide the family with the freshest, fastest growing onions green feathers in sufficient quantity. Due to the high yield, such a device will significantly save money on the purchase of fresh herbs on the market.

Working hard to create garden beds at the start of the season, owner personal plot may look forward to good results. Good choice of materials proper arrangement ridges will ensure the convenience of working in the garden, will guarantee a decent harvest.

Today, among the owners of summer cottages, there is a tendency to place fences like borders or fences not only in flower beds, but also in vegetable beds. Now in specialized departments of stores you can purchase special fences designed specifically for these purposes.

Borders for beds and flower beds perform such functions as:

1. Aesthetic function: the beds in the garden, which are divided into identical parts of a rectangular or other shape, look elegant and quite well-groomed. Throughout the season, beds with flower beds keep the same shape, and there is no need to constantly correct them, because the fence does not allow the soil to spill out and spread;
2. Practical Features:

• Due to the deepening into the soil, the sides of the fences do not allow weeds from uncultivated areas to penetrate to cultivars plants;
• The area for heavy physical work is reduced: manual type weeding, fertilizing, digging and much more;

• Fenced beds are easier to cover with a film, fix arcs for greenhouses above them, allowing you to grow greens in early period and seedlings of vegetables and flowers;
• Can create warm beds in order to grow heat-loving varieties of plants, for example, cucumbers.

We select material for the manufacture of fences

There are a huge number of methods for fencing beds and flower beds in the country. It is possible to buy ready-made designs or make them yourself from any materials at hand.

Consider the options for materials for the manufacture of fences for a summer cottage:

• Metal garden fence for flower beds and beds

Such fences are made from such universal material like galvanized steel, with polymer coatings on top different shades. Galvanized fence can be easily installed, they look very neat, have a fairly long service life.

The disadvantages of galvanized fences include high price and increased thermal conductivity of the metal. Considering service time similar materials, then their cost over time can justify itself. And the heating of the soil is significantly reduced by means of a polymer coating of the sides. In order to completely exclude overheating of the soil from metal heated under the rays of the sun, it is possible to lay the sides from the inside with pieces of cardboard or other waste material with low thermal conductivity.

• plastic fencing

If the aesthetic function is important, then it is possible to use polycarbonate fences in various colors. These fences are made up of small sections. various forms, any of which has pointed pegs at the edges, which is very convenient for do-it-yourself installation. Such fences are used mainly for decoration, they cannot be used to create high beds, since plastic fences have gaps between the boards through which soil can begin to crumble and liquid seep during irrigation or rain.

• Plastic borders

The most popular and at the same time inexpensive way to form beds of arbitrary shapes are plastic borders. But the cost is still of great importance, because the lower it is, the worse quality plastic from which the border is made. Affordable curbs break instantly and cannot tolerate the effects of low temperatures. border tape made of high-quality plastic is more expensive, however, and its service life is much longer. To prevent the curb from bending under the pressure of the soil, it must be strengthened with small supports - these can be metal or wooden pegs.

• Pergons

This type of fence is made of stone, which is a metal mesh frame filled with stone, or other such material. Such a fence is unlikely to be suitable for growing potatoes or pumpkins, however, flowers, berries or greenery framed with stones will be an excellent decor for any area in the country. But the option of polycarbonate can be made with your own hands.

• slate border

You can also make a border with your own hands from a flat or corrugated sheet of an old slate roof, if it is possible to cut it with a grinder into pieces of identical dimensions and use them as a border. However, such a slate fence is not very durable, in particular, if applied old stuff. In addition, it must be taken into account that during heating, asbestos-cement sheets can release various substances harmful to human health. But the option of polycarbonate fencing is not so harmful.

• wooden fencing

You can use one of the following materials: edged or regular board, slab, rail, lining or timber. A wooden fence may look like a box without a base or be assembled from separate shields with pegs for installation work. It is necessary to take into account the fact that wood is a short-lived material, in particular if it is used in constant contact with wet ground. Therefore, basically, with such material, only beds with flower beds can be fenced, while the wood must first be treated with antiseptics and anti-woodworm bugs.

• Sheet metal railings

Remains roofing metals along with cuts metal corners or wooden pegs - that's all you need to build makeshift fences from metal. They, like wood options, can be solid.

• brick fence

The construction of a brick fence is a rather costly and time-consuming solution, which results in a stationary garden bed and flower bed. But the task of landscaping the territory can be solved once and for all. Brick fences are practical option for a homestead.

DIY garden border

Consider how to make a garden border with your own hands:

• In order to make a garden border with your own hands, you need to outline and designate the territories through which the fence will pass. Any of the straight lines must be marked with a rope, which we pull on pegs, and smooth curved lines can be comfortably made using a garden hose laid out in the required shape;

As you know, in the spring the day feeds the year, so the gardeners urgently begin to plant and transplant, there is simply no time left for some “little things”. And then it turns out that such "little things" as fences for beds could save both time and effort. After all, properly made borders for beds do not let weeds in there, do not allow water to spread during irrigation, strengthen the edges, which prevents nutritious fertilized soil from crumbling.

Yes, and look like a garden with fenced beds will be much more attractive.

Why do we need structures for beds

It seems to an inexperienced gardener that the construction of such structures is too time-consuming and completely optional. Indeed, during their construction you will have to work hard, but these labor costs will pay off in the future with interest. So what is the purpose of the fences? They are the following:

• weeds from the paths will not “creep” into the garden;
• all irrigation water will remain with the plants, and not spread anywhere;
• a raised bed is easier to handle;
• plantings will not be harmed by bears and other crawling insects;
• you can easily put a mini-greenhouse over a protected bed;
• a warm bed can only be made using building envelopes;
• correctly made designs for beds can serve for many years.

The only negative in creating beds is that they still need to be done. This article gives tips on how not too expensive to make fences for garden beds with your own hands, with a minimum of effort and getting the maximum result.

Advice! To get the greatest positive effect, it is recommended that certain standards be observed when constructing beds. Optimal dimensions beds: width 0.8–0.9 m, arbitrary length, most conveniently from 4 to 6 m, height of the sides 10–15 cm.

The material for fencing the beds can be anything: they can be made of brick, stone, metal, wood, roofing materials, plastic and glass bottles, car tires. For those who wish, the trading network can offer many options for ready-made beautiful fences for every taste and budget.

How to make a slate border

The simplest and most reasonable way out is to use improvised materials lying around on the site after the construction of the house was completed. Such material may well be slate sheets, bought with a margin and not useful for the roof. These sheets are cut with a grinder and dug in along the perimeter of the beds.

Such a fence is not only economical, but also very easy to manufacture. The disadvantage is fragility and the fact that when exposed to water, slate releases substances that are not very useful for plants.

If a roofing material there was not slate, but corrugated board, then these shortcomings will not be - the corrugated board is more durable and does not emit harmful substances.

But when building fences from corrugated board, they need to be strengthened wooden slats or metal profile.

Construction of wooden borders

The most common fences we have are wooden fences. They can be made from boards, slats, timber, logs, slabs, pickets, lining, edged and unedged boards.

For such curbs, you need to make supports in the form of stakes driven in around the perimeter. Fencing the beds with boards looks natural; during its construction, you can show your imagination by making the beds multi-tiered or in the form of polygons of various sizes.

Fences made of stumps or pieces of logs dug vertically look original. A fence in the form of a wattle fence will create a rustic design.

The disadvantage of wood borders is its fragility. To increase the service life of such fences, their lower part should be treated with bitumen or other antiseptic or wrapped with roofing material, and upper part color.

During operation, such fences need to be repainted.

brick borders

Is it worth it for a long time to think about how to fence the beds in the country? From the construction there was a brick, it can be successfully used for borders! Brickwork will last a very long time, it will look aesthetically pleasing and keep its shape perfectly.

It is not necessary to use masonry, you can simply put the bricks on edge, slightly digging them into the ground. Such a border is easy to make and, if necessary, can be moved to a new location.

Borders for beds made of metal

The metal fence is a box, best metal is galvanized, which is not subject to corrosion. Galvanized sheets are cut into strips of the required width and fastened with self-tapping screws using corners. Usually, 1 mm thick galvanization is used, the walls of such a fence are thin, they require support with stakes, and you can cut yourself on sharp edges. Finished boxes are usually polymer-coated and do not have sharp edges, but such products are relatively expensive.

Dignity metal structures their strength is their strength, and the disadvantage is that in summer the metal can become very hot and spoil the roots of the plantations.

Borders for beds made of stone

Stone fences will be chosen by lovers of ecologically clean materials. Any will do natural stone, with which you can simply overlay the beds, or you can fasten it with a solution. Such a fence is made using the following technology:

1. With the help of pegs and a rope, markings are made.
2. A groove 0.3 m deep is dug under the foundation, covered with roofing material or film and poured with cement mortar.
3. After the mortar has hardened, masonry is done, starting with stones bigger size. On the upper layer smooth stones are laid. The gaps between the stones are filled with a solution with the addition of gravel.

Important! Cavities must be left in the enclosure for ventilation.

Stone fences can last forever, they do not need to be looked after, and they look solid and noble.

Natural stone can be replaced with concrete using ready-made concrete blocks, or build curbs yourself by making formwork.

The only disadvantage of such fences is the relative high cost.

Using Grids

Fences from grids with filling are called pergons. Such bulk fences are filled with pebbles, broken glass, tiles, gravel. Using imagination, you can make unusual beautiful fences using fillers of different colors.

Such fences are durable, do not require maintenance, but are quite expensive.

Fences from improvised materials

Fine material can be left over from the decoration of the premises. plastic panels. Fences made of such material do not heat up in the sun, do not rot or rust, they do not need to be painted. They are easy to manufacture, beds with such a fence can be given a wavy non-standard shape.

Old tires are widely used by our gardeners as fences. Large tires are simply filled with earth, a round flower bed is obtained, smaller tires are dug halfway into the ground, forming a wavy fence, cut, giving the shape of a bowl or making fences from fragments.

Often you can see the sides of plastic or glass bottles in the gardens.

Making such fences will only require labor and time, but it will help save money.

Do-it-yourself borders for beds from plastic bottles are made as follows:

1. Collect right amount identical bottles, wash thoroughly and remove stickers.
2. Dig grooves around the perimeter of the beds.
3. For stability, fill the bottles with sand or earth.
4. Set the containers vertically with their necks down, tightly tie together, and dig in.

Despite the cheapness, bottle fences look quite aesthetically pleasing, do not rot and can last for more than one year. At the same time, this will help rid the site of debris. If desired, you can paint such a fence in bright colours, then it will serve not only to protect plants, but also to decorate the site.

The use of ready-made fences

Fences for beds with a polymer coating made of galvanized steel can be purchased at stores. The trading network offers borders of any colors, including stone imitation, brickwork, tree. The advantages of such fences are their durability, ease of installation and aesthetic appearance. Fences made from improvised materials will lose their decent appearance in a few years. And they will have to be changed, and beds made of metal with a polymer coating can serve for at least 20 years without losing their original qualities.

The only disadvantage of such products is the high cost. Typically, such fences have a width of 0.5 m or 0.36 m, the length is chosen arbitrarily. Such borders are reasonable to use for flower beds in the courtyard of the house, but it is hardly worth spending money on them to protect the beds with onions.

For finished structures, there is no need to dig trenches, they are simply stuck into the ground with the help of pins. Fencing is easy to move from place to place, it is not afraid of moisture and the scorching sun.

Curb tapes are very popular with gardeners. Them undeniable merits are:

The strips are 20-30 cm wide, the structure is fixed with plastic pegs.

Curb tape is produced corrugated, flat and figured, sold in rolls from 10 to 50 m long.

Along with the benefits. Curb tape has a number of disadvantages:

• inexpensive types of tapes are made of plastic that cannot withstand negative temperatures;
• thin walls of the fence, heavy soil is able to burst, therefore, such material is not suitable for high beds;
• cheap tapes are not strong enough, and better ones are expensive.

Conclusion

How to fence the beds on his site, each gardener will be able to decide on his own, having learned which fences for garden beds exist, and what are the advantages and disadvantages of each type. It all depends on the characteristics of the site, the possibilities and imagination of the owner.

Fencing for beds photo:

Similar posts

There are no related posts.

Fences for flower beds and beds make it easier to work on the ground and at the same time perform some decorative functions, because a flower bed or garden bed with a fence looks much more attractive than without. Also, the fence for the flower beds prevents the soil from washing away and creeping, and it is much easier to process such beds. The garden border reduces the spread of pests, rodents, insects, and inhibits the growth of weeds.

Kinds

Previously, borders for flower beds and beds were made practically from improvised materials - stones, slate, boards, bricks, tiles, concrete blocks, etc. But today more modern borders for beds are gaining popularity:

• Plastic fencing for flower beds is the most popular option. Plastic is not afraid of temperature changes, frost, exposure to sunlight, it does not rot, such a fence is not afraid of fungus and mold. Fence for flower beds made of plastic is easy to install, easy to care for, it is very functional.
• Metal garden fences for flower beds - are durable, but are subject to rotting and corrosion. If you do not take precautions, then the fence for flower beds made of metal can be dangerous due to the sharp edges of its elements.
• Wooden fences for beds are beautiful, inexpensive and environmentally friendly structures, usually made in the form of fences made of stumps, pegs, etc. However, such borders are short-lived and subject to external influences.

A special place is occupied by decorative fences for flower beds and garden beds, which can turn a garden plot into a work of landscape art.

In Leroy Merlin stores you can find and buy fences for beds and flower beds made of different materials, among the range of which each buyer will find the option that suits him. Highly qualified network staff will answer any question and help you choose and buy a border at the best price.

Leroy Merlin offers a wide range of products for low prices for residents of Moscow, as well as cities of the Moscow region: Balashikha, Podolsk, Khimki, Korolev, Mytishchi, Lyubertsy, Krasnogorsk, Elektrostal, Kolomna, Odintsovo, Domodedovo, Serpukhov, Schelkovo, Orekhovo-Zuevo, Ramenskoye, Dolgoprudny, Zhukovsky, Pushkino, Reutov, Sergiev Posad, Voskresensk, Lobnya, Klin, Ivanteevka, Dubna, Yegorievsk, Chekhov, Dmitrov, Vidnoye, Stupino, Pavlovsky Posad, Naro-Fominsk, Fryazino, Lytkarino, Dzerzhinsky and Solnechnogorsk. You can order the necessary goods online with delivery to all these cities or visit one of our retail stores.