Do-it-yourself beds from corrugated board. Buy ready-made plastic beds: prices and reviews

Today, among the owners of summer cottages, there is a tendency to place fences like borders or fences not only in flower beds, but also in vegetable beds. Now in specialized departments of stores you can purchase special fences designed specifically for these purposes.

Borders for beds and flower beds perform such functions as:

1. Aesthetic function: the beds in the garden, which are divided into identical parts of a rectangular or other shape, look elegant and quite well-groomed. Throughout the season, beds with flower beds keep the same shape, and there is no need to constantly correct them, because the fence does not allow the soil to spill out and spread;
2. Practical functions:

• Due to the deepening into the soil, the sides of the fences do not allow weeds from uncultivated areas to penetrate to cultivars plants;
• The area for heavy physical work is reduced: manual type weeding, fertilizing, digging and much more;

• Fenced beds are easier to cover with a film, fix arcs for greenhouses above them, allowing you to grow greens in early period and seedlings of vegetables and flowers;
• You can create warm beds in order to grow heat-loving varieties of plants, for example, cucumbers.

We select material for the manufacture of fences

There are a huge number of methods for fencing beds and flower beds in the country. It is possible to buy ready-made designs or make them yourself from any materials at hand.

Consider options for materials for the manufacture of fences for suburban area:

• Metal garden fence for flower beds and beds

Such fences are made from such universal material, like galvanized steel, while on top there are polymer coatings of different shades. Galvanized fence can be easily installed, they look very neat, have a fairly long service life.

The disadvantages of galvanized fences include high price and increased thermal conductivity of the metal. If we take into account the service life of such materials, then their cost over time can justify itself. And the heating of the soil is significantly reduced by means of a polymer coating of the sides. In order to completely exclude overheating of the soil from metal heated under the rays of the sun, it is possible to lay the sides from the inside with pieces of cardboard or other waste material with low thermal conductivity.

• plastic fencing

If the aesthetic function is important, then it is possible to use polycarbonate fences of various colors. Such fences consist of small sections of various shapes, each of which has pointed pegs along the edges, which is very convenient for do-it-yourself installation. Such fences are used mainly for decoration, they cannot be used to create high beds, since plastic fences have gaps between the boards through which the soil can begin to crumble and liquid seep during irrigation or rain.

• Plastic borders

The most popular and at the same time inexpensive way to form beds of arbitrary shapes are plastic borders. But the cost is still of great importance, because the lower it is, the worse quality plastic from which the border is made. Affordable curbs break instantly and cannot tolerate the effects of low temperatures. High-quality plastic border tape is more expensive, however, and its service life is much longer. To prevent the curb from bending under the pressure of the soil, it must be strengthened with small supports - these can be metal or wooden pegs.

• Pergons

This variant of the fence is made of stone, which is a metal mesh frame filled with stone, or other such material. Such a fence is unlikely to be suitable for growing potatoes or pumpkins, however, flowers, berries or greenery framed with stones will be an excellent decor for any area in the country. But the option of polycarbonate can be made with your own hands.

• slate border

You can also make a border with your own hands from a flat or corrugated sheet of an old slate roof, if it is possible to cut it with a grinder into pieces of identical dimensions and use them as a border. However, such a slate fence is not very durable, in particular, if applied old material. In addition, it must be taken into account that during heating, asbestos-cement sheets can release various substances harmful to human health. But the option of polycarbonate fencing is not so harmful.

• wooden fencing

You can use one of the following materials: edged or regular board, slab, rail, lining or timber. A wooden fence may look like a box without a base or be assembled from separate shields with pegs for installation work. It is necessary to take into account the fact that wood is a short-lived material, in particular if it is used in constant contact with wet ground. Therefore, basically, with such material, only beds with flower beds can be fenced, while the wood must first be treated with antiseptics and anti-woodworm bugs.

• Sheet metal railings

Remains roofing metals along with trimmings of metal corners or wooden pegs - this is all that is needed for the construction of homemade metal fences. They, like wood options, can be solid.

• brick fence

The construction of a brick fence is a rather costly and time-consuming solution, which results in a stationary garden bed and flower bed. But the task of landscaping the territory can be solved once and for all. Brick fences are a practical option for a personal plot.

DIY garden border

Consider how to do garden border do it yourself:

• In order to make a garden border with your own hands, you need to outline and designate the territories through which the fence will pass. Any of the straight lines must be marked with a rope, which we pull on pegs, and smooth curved lines can be comfortably made using a garden hose laid out in the required shape;

Borders around garden and garden plantings – practical solution which has many advantages. However, not all summer residents are in a hurry to enclose vegetables and herbs, referring to the complexity of the work and the high cost of materials. Consider the most popular ways of erecting borders, try to dispel doubts and offer options on how to quickly and cost-effectively make a fence for beds from improvised materials. The variety of techniques allows you to create beautiful and practical fences for any type of plant.

Benefits of garden fences

Some summer residents adhere traditional way cultivating the land and do not understand why the beds are fenced.

wooden fencing

Dividing the garden into mini-zones with the construction of fences has a number of advantages, both practical and decorative:

1. Weed reduction. Framing the beds significantly reduces the area for the growth of weeds. In addition, when the sides are deepened into the ground, a kind of barrier is created that prevents the spread of pests and diseases to neighboring crops.
2. Strengthening loose soil. The fence for beds prevents shedding of soil and reduces its weathering, erosion. The use of fences is especially important for sandy and sandy substrates.
3. Getting an early harvest. Installing the sides for the beds allows you to create a "thermo-garden" by filling the erected box with various organic matter. In warm plantings temperature regime soil is higher than in a traditional vegetable garden, so vegetables are planted and ripen faster.
4. Ease of maintenance. Weeding, loosening or harrowing the earth is much easier.
5. Ease of lawn mowing. When mowing grass, bed borders protect plantings from damage by lawn mower blades.
6. The attractiveness of a flower and vegetable lawn. The aisles remain clean, and the garden looks well-groomed.

Growing crops in separate boxes

Fencing can become an integral element of landscape design. The combination of multi-colored border tapes for beds or the original use of familiar materials will allow you to zone the site and create a bright garden composition in the country with your own hands.

Zoned vegetable garden on the plot

Garden fencing requirements

The requirements put forward to the framing of landings, first of all, depend on the purpose of the fence. Flower fences should be in harmony with the style of the entire garden, and borders for garden beds are selected taking into account the type of vegetable crops and the way they are grown.

Nice garden fence

General requirements:

1. Strength. The sides must withstand the pressure of the earth and not spread on the sides when the soil gets wet - especially during the thaw and spring floods.
2. Resistance to mechanical damage. In case of accidental impact with a rake or a shovel, the material should not deform or crack.
3. Durability. It is optimal if the constructed frame will last at least 5-10 years.
4. Easy assembly. Fences that are difficult to install should be erected for perennials - shrubs and flower beds. When arranging the ridges, it is desirable to provide for the possibility of dismantling and transferring the structure to another place.
5. Environmental friendliness. The material must not emit toxic substances. This requirement is especially relevant when choosing polymer fences, since some plasticizers are poisonous when the temperature rises. Harmful elements can get into the soil, and then into the roots, stems, leaves and fruits of plants.
6. Profitability. This criterion is best met by fences made from improvised materials: boards, old bricks, plastic containers.

Advice. For the construction, you should not choose a material that is very hot in the sun. In such structures, the soil dries out very quickly, and the plants experience a lack of moisture.

Planning a plot for growing vegetables

• minimum height the fence is 15 cm if there is fertile soil on the site, 30 cm if an embankment is expected or partial replacement soil;
• for planting potatoes, beets and other root crops, a raised ridge with a height of 40 cm or more is suitable;
• when constructing compost thermo-beds, the height of the box should be at least 60 cm;
• the width of one row within 120 cm - this will allow without special efforts reach the middle of the plantings while cultivating the land or picking fruits.

We make fences with our own hands

There are many techniques for framing garden beds in the country. To choose best option, it is necessary to compare the positive and negative qualities of each method.

Practical use of the picket fence

Wooden fencing - a variety of options

Wood meets most requirements. This material for beds is economical, safe, easy to install and quite durable. The only drawback is the susceptibility to rotting in conditions high humidity. However, this risk can be minimized by treating the curbs with an antiseptic composition.

To create wooden fences for beds with their own hands fit beam, lining, cut material, slab, hemp, long boards or a picket fence - any household blanks are used. The options below will help you decide on the formwork model for the beds:

• a multi-tiered ridge of profiled timber will decorate any cottage or backyard;
• picket fence for beds - the elements should be located back to back to prevent soil from spilling out;
• high warm plantings framed by croaker - an alternative to a traditional greenhouse;
• organization natural farming on high ridges of boards.

When choosing a material, it is necessary to pay attention to the type and condition of the wood. Suitable wood species:

• ash and oak - high-strength, durable wood, minus raw materials - high cost;
• pine - inexpensive, soft material, easy to process, lack of wood - susceptibility to moisture;
• cedar and larch are different long term operation;
• acacia - has good performance characteristics, but is difficult to process.

How to make boards from boards with your own hands

We will analyze step by step how to fence the beds with boards with your own hands. The proposed option is suitable for breaking down a garden on open ground, the size of the box is 1 * 1.6 m.

Homemade fences from boards

Materials and tools:

• boards 150 * 25 mm, length 2.5 m - 4 pcs.;
• boards 150 * 25 mm, length 3 m - 2 pcs.;
• board 100 * 50 mm, length 2.5 m - 1 pc.;
• screws;
• tape measure, pencil and ruler;
• screwdriver and saw.

Work progress:

1. "Grow" the height of the sides with another row of boards.
2. Fix the upper shelves - first screw the longitudinal sides, and then the transverse ones.

Fixing the top shelves

Move the formwork to the right place and fill fertile soil.

Practical metal fencing

A French garden with metal borders for beds looks very neat. Due to the rigidity of the material, it is possible to achieve clear geometric lines. The galvanized framing of the beds is considered the strongest and most durable - galvanized steel coating is preferable to iron.

Application metal structures

Features of metal fences for garden beds:

• ready-made modular fences are very mobile - they are easy to assemble, disassemble, transport and reinstall;
• high cost of a metal box;
• such a design will not “float” during the rainy season and after the snow melts;
• hardware susceptible to corrosion, in the absence of galvanizing, the sides will have to be painted annually;
• the metal has good thermal conductivity - near the fence, the soil can heat up to a critical temperature, inhibiting the roots of plants.

Advice. It is better to install fences for beds with polymer coated- the layer reduces the thermal conductivity of the metal and protects the soil from overheating.

Purchased galvanized fences

When creating fences with your own hands, galvanized corrugated board is often used. Consider step by step how to make a fence for ridges:

1. Decide on the dimensions of the beds from the profiled sheet, mark the metal sheet and cut it. For cutting, you can use scissors for metal or an electric saw.
2. When planning the product, it is important to provide that the direction of the waves of the metal profile should be transverse relative to the surface of the earth. The height of the formwork is calculated taking into account the depth of 10-15 cm.
3. Mark the location of the beds on the site and dig a shallow narrow trench around the perimeter of the site.
4. Set the prepared sides, level them, overlap them and fasten them with rivets.
5. Fix a U-shaped profile on top of the corrugated board - it will hide sharp edges and protect the metal from moisture.

Durable stone fences

Unusual decorative fence it will be possible to build it with your own hands from stone. The shape, layout order, dimensions of the elements used are all at the discretion of the performer. Do-it-yourself options for erecting stone borders for beds are presented below.

dry method. Large boulders are used as a fence. The first row of blocks is deepened into the soil by 5-8 cm, ensuring the stability of the structure. Subsequent cobblestones are laid out on a sand-and-earth sprinkling.

Dry stone laying

You can fence the beds with sandstone, limestone, basalt or pebbles. It is undesirable to frame the beds with granite - the mineral acidifies the soil, worsening its nutritional qualities.

Solution laying. The method is more laborious, but allows you to build a solid monolithic structure that does not require any maintenance. This approach involves the use of both large and small stones in construction.

Fixing stones on sand-concrete mortar

The use of curb stone. To cover the beds, some summer residents buy ready-made decorative plates. A wide range of suitable border stones for beds allows you to create original fences of different colors.

Curb stone in the arrangement vegetable plantings

The disadvantage of this method is the limited height. The curb stone is not suitable for the construction of a raised thermo-bed.

How to make a decorative pergon around the garden

Gabions and pergons - bulk decorative fences. Reticulate steel frame filled with stones of different fractions. The design is simple in execution, does not need a foundation, is affordable and fits perfectly into any landscape design.

Gabions - original way garden beds

To create a pergona with your own hands you will need:

• durable galvanized wire mesh with a wire thickness of 2-3 mm;
• clamps for fixing the frame;
• geotextile for the substrate;
• filler - pebbles, stones;
• shovel, pliers, tape measure, level.

Fixing the sides of the frame

Work progress:

1. Prepare the sides of the box from the mesh. When finished, the bed will be framed with rectangular blocks - the height and width are selected arbitrarily.
2. Along the perimeter of the landing area, mark a strip with a width equal to the base of the fence. The soil should be leveled, compacted and covered with geotextile.
3. Assemble the frame, fixing the position of the formwork with wire. Screw the fasteners inward to keep the structure neat. Leave the top of the prepared basket open.
4. After installing the four boxes, fill the mesh frame with stones and screw on the top.

Filling the mesh box with stones

Available Plastic Fencing

The simplest and fast way fencing vegetable plantings with their own hands - edging the beds with plastic. Presented for sale wide range of ready-made solutions for giving.

Border tape. Flexible, lightweight fencing for framing lawns, flower beds, paths and raised beds. The tape is supplied in rolls. different lengths, the width of the strip is 20-50 cm. The set includes plastic pegs for fixing the fence. Flat and corrugated "borders" are produced.

plastic border tape

The technology for installing the tape is very simple:

1. Mark the border of the beds on the site.
2. Align the pegs evenly along the contour of the "vegetable" platform.
3. Attach tape to the wedges, partially deepening the curb into the ground.

Important! The tape must be well tensioned - this will ensure the rigidity of the fence, and prevent the appearance of sagging.

Assembly technology of garden polymer panels

An alternative to flexible tape is straight flat panels. They are more rigid, but are only suitable for creating straight mini-gardens. Teeth on the underside make mounting easier plastic borders for beds.

Volumetric panels "Garden board" and "Stone". Products emit natural building materials. With their help create various garden compositions. Polymer modules are decorative and practical, the only drawback is the relatively high cost.

Do-it-yourself assembly will not cause any difficulties - the set is equipped with panels, pegs and plugs. The task of the performer is to prepare the site and fix the curb.

Garden constructor - fencing with a flexible design. Sides for beds made of plastic panels are designed to create ridges and flower beds unusual shape. Border elements are combined into a closed single chain. By changing the direction of the "snake", in a few minutes it will be possible to create an unusual fence for growing country crops.

Budget fencing made of slate

For those who are looking for how to fence the beds in the country inexpensively, suitable option using slate. Asbestos-cement slabs are resistant to moisture, easy to process and install, durable and affordable.

A fence for garden beds in the country is often erected from flat or wave slate. On sale there are special asbestos-cement strips of standard dimensions: length - 3 m, thickness - 16-40 mm.

Strengthening the sides of the slate fence

Instructions for edging the beds with slate with your own hands:

1. Determine the dimensions of the future ridge and, according to the dimensions, make blanks for the sides of the box. When calculating the height of the side, it should be noted that 20 cm of slate will go away when installed deep.
2. Mark on the ground and dig a trench 20 cm deep around the perimeter.
3. Install slate sheets in the dug holes in a strictly vertical position.
4. Fix the sides - cover with earth and tamp.
5. Prepare holes for fasteners in metal corners and asbestos-cement sheets.
6. Attach the corners to the slate with bolts.
7. To give rigidity and stability to the entire structure, it is desirable to install metal supports. Weld a metal plate to a reinforcing bar - a home-made support is fixed with bolts to the sides of the fence.

Fastening the sides of the box with a metal corner

By analogy, you can block the beds with wavy slate. To strengthen the high sides, it is necessary to build a frame of reinforcing bars and boards. Attach slate sheets to wooden elements nails.

Wavy slate framing option

Before framing the beds with asbestos-cement sheets, you need to consider security measures. When sawing slate, a lot of dust is generated, so it is important to protect the eyes and respiratory tract. The cut site should be moistened with water.

Compliance with safety measures when cutting slate

Plastic bottle fence

Fencing beds with plastic bottles is not difficult. For implementation simple option you will need PET bottles with a capacity of 1.5-2 liters, a shovel, sand and multi-colored paints.

Fencing with plastic bottles

step by step algorithm fencing beds with their own hands:

1. Pick up a container of the same volume. It is optimal if the containers match in color, however, it is difficult to collect many identical bottles. Therefore, it is better to paint them in one color better from the inside.
2. Fill the bottles with small pebbles or sand - this will give them the missing strength and ensure stability.
3. Determine in the country a place for the formation of beds and markup.
4. Dig a trench 8-10 cm deep along the perimeter, the width of the ditch should correspond to the dimensions of the bottles.
5. Turn the filled containers upside down and install them in the trench as tightly as possible - the elements should not stagger.

Strengthening the plastic structure

Fenced beds can be reinforced at the corners with support posts. Make holes in the bottles in advance, stretch the wire and tighten it tightly on the side stakes. Such a hitch will prevent the elements from “falling out” when cultivating the land.

With a creative approach to the issue, even from used containers, it will be possible to build beautiful garden fences. They can have an unusual shape, consist of several tiers, or be complemented by decorative elements.

Creating ridges of an unusual shape

It is not difficult to build a fence for planting vegetables. When choosing suitable material must be compared own forces, time and money costs for the implementation of the plan. Compliance with the chosen technology will help to easily "order" the garden and increase its efficiency.

Special soil prepared according to special recipes, seasoned with fertilizers and nutrients, very often eroded by rain and water when watering. To prevent this from happening, experienced gardeners arrange fencing beds from special, and more often improvised materials: slate, plastic panels, curb tape, boards. This article is all about the construction of fences for garden beds with your own hands: instructions, photos, videos.

Fencing garden beds: from what and for what?

Order in the garden is the first thing. It's nice to admire the rows as even as a ruler; well-groomed green vegetables that grow in neat rows; clean paths, not overgrown with weeds and not littered with heaps of spilled earth and sand. Gardening is not easy! Experienced gardeners install special fences for beds, since it is easy to do it yourself from improvised means.

Fencing beds will help to immediately solve a complex of care issues

Let's see why fences are installed garden beds:

1. Prevention of erosion of garden soil during irrigation or precipitation - in this case, the advantages of installing bumpers are obvious. Precious nutrient soil will not be washed out onto the paths, creating dirty puddles and streaks.
2. The ability to create a base for a temporary spring greenhouse ( warm bed) - when installing high sides of the fence, you can arrange a layered bed, which is suitable for a greenhouse. It is convenient to install arcs for stretching the film. The finished greenhouse will be done neatly and professionally.
3. Limiting the growth of weeds - with the device of fencing the beds, the planting area is limited, which significantly reduces the spread of weeds and harmful plants. If the fencing elements of garden beds are dug in to a certain depth, then the protection of the landing area from the spread of perennial weeds increases significantly - the side of the garden bed becomes an insurmountable obstacle for them. So you can limit the growth of couch grass and reeds, their root system spreads underground for considerable distances.
4. Improving the aesthetics of the design of the garden - the eye is pleased with the beautiful framing of green beds and the cleanliness around them. Not many gardeners can boast of the perfect order on their garden plot, although it is not difficult to make the sides of the beds with your own hands from waste materials.

Advice. When arranging beds in the garden, it is worth observing some norms, this will help the plants develop better, reduce maintenance costs, help save time, and also allow for a higher yield.

The dimensions of the beds (the best option) should be as follows:

• Width - from 80 to 90 cm.
• Length - any (depending on the capabilities of the individual site). I would like to note that very long beds are inconvenient to maintain, especially for irrigation. Therefore, the length of garden rabatok should be limited in the range of 4-6 meters.
• Height - optimal height the side is from 10 to 15 cm.

Materials for fencing beds

Materials for fencing beds and building sides can be: brick, rubble stone, sheet metal, plastic panels, special fencing border tape, plastic and glass bottles, lumber, asbestos-cement sheets, slate, metal slate. All these materials have their positive and negative qualities which should be discussed in more detail.

To fence the beds, you can use any materials that are available to you.

But the use of the listed materials for arranging the sides of garden beds has a different budgetary framework: so the use of used plastic bottles will not bring any costs to the gardener, but buying a special border tape can thoroughly lighten the pocket.

Positive and negative sides of materials for fencing garden beds

metal fences– differ in resistance to mechanical damages, easily keep the set form. Metal sheets are cut with special metal scissors, so only a person with certain craftsmanship skills can do this.

For several years, strong metal sides will serve faithfully, but the terrible enemy of metal - rust, will completely destroy the fence over time. The situation is aggravated by the constant contact of the protective circuit with water. Therefore, when installing metal fences, it is necessary to provide reliable protection metal from the spread of rust, painting the finished parts of the beds with protective compounds.

The negative quality of metal fences is the strong heating of the structure under the influence of sunlight. In especially hot summer days the fence can heat up to +50 C.

Attention! Vegetables planted close to the side of the bed are badly burned when in contact with the fence.

Fencing beds from natural wood distinguished by high environmental safety. However wooden structures quite expensive, besides short-lived.

Contact with water and damp earth is not in vain for lumber fences. The tree is easily exposed to the development of bacterial rot and fungal infections. Even protective operations carried out before installing a wooden curb do not guarantee long-term operation.

Wooden borders are easy to paint in any color, so to create certain landscape compositions, especially if there is more in the garden wooden buildings in the same style, the tree fits perfectly. It is worth remembering the fragility of a wooden fence for vegetable or flower beds.

Wooden fence for beds

Plastic bottles- junk material that does not cost the gardener a penny. Bottles are installed manually, one by one - they are dug into the edge of the beds. To maintain the correct direction and parallelism of the rows, you should first outline the line with twine, pulling it over the pegs driven into the corners of the beds. The bottle fence is not durable - very often the bottles are knocked out of the row, fall on their side and are deformed. Under the influence of the sun and precipitation, the plastic acquires a muddy and dirty surface, the appearance of such a fence greatly reduces the beauty of the summer cottage.

Slate- This material is well-deservedly popular with gardeners. To fence the beds, the remains of slate are often used, which were formed after the repair work on the roof. The fence is easy to install, it is not destroyed by water, precipitation, low temperature. Slate heats up less in the sun than metal, so the risk of damage to cultivated plants in contact with slate is much lower. Slate fencing fits perfectly into the overall design of the garden plot.

rubble stone- this material perfectly complements the landscape design, harmoniously fits into the arrangement of any garden. Stone frames look especially impressive on flower beds and discounts. Laying rubble stone is a laborious and long task, while the cost of the material is quite high.

Advice. It is justified to arrange garden beds framed with rubble stone in the presence of natural deposits of material.

Plastic panels - the most popular framing device option today vegetable beds. Plastic panels do not warp from excessive moisture, do not develop rot, their geometric dimensions do not change from exposure to frost, sun, snow or rain.

With their light weight, PVC panels are easy to transport. Cutting material does not require special tools and skills. During the construction of the sides of garden beds, it is allowed to use used panels.

Zinc fence

The downside of the plastic frame is the change in the density of the panel, its yellowing over time and the impact of adverse factors. Some panels begin to collapse (crumble) after a few years from exposure to frost and excessive insolation.

The low cost of PVC panels, wide availability and rich assortment make this material attractive and widely used for gardening.

border tape- very often used to frame beds in the garden and flower beds in the flower garden. The material has undoubted positive qualities:

• Can be purchased at any garden store.
• Availability of various color options.
• High technical characteristics for strength and reliability.
• Easy to install and cut.
• Possibility of framing polygonal and round beds.

Fencing with curb tapes

With high positive qualities, there are a number of negative ones:

• Some types of border tape are made of plastic, which is not able to withstand negative temperatures.
• The thin walls of the tape are often bursting with heavy soil, especially when arranging high beds.
• Quality border tape is different high cost, and cheap analogues have low strength.

The choice of material for the construction of framing garden beds remains with the owner of the summer cottage. Only he can make a decision that takes into account all the features of the beds and site design. The technology of work on the installation of fences from materials of various types is perfectly demonstrated by the videos attached to the article.

DIY beds: video

Arrangement of beds: photo

Many owners of private houses and garden plots are engaged in growing fruit crops. It is much more pleasant to watch plantings grown with your own hands than on the grass in the garden.

Plantings of fruits and vegetables on separate beds ennoble the site and make it well-groomed. Every gardener thinks about landing fence how to make it yourself and what materials to use?

What material is better to protect the beds?

Fences for beds are used from various ones, the main ones are:

• metal;
• plastic;
• rubber;
• slate;
• brick.

Before deciding what to make the sides for the beds, consider the disadvantages of these materials.

Metal

The use of galvanized steel borders with the addition of polyurethane will make the owners of the site forget about the fading of the material and its periodic replacement. fences are highly durable and decent view.

Such beds are created from environmentally friendly elements, and will not harm the health of family members.

Galvanized steel has a number of advantages benefits:

The disadvantage of such a border- increased heating of the metal surface, which also affects the temperature of the soil.

Most gardeners do not trust this material due to the fact that metal barriers will kill perennials in winter period. If you follow the landing rules, nothing will happen.

Landing perennials with a metal border, it is important to remember: the distance from the intended fruits to the beginning of the barrier must be at least ten centimeters.

Plastic panels

Previously, a tree was often used to fence a flower bed or plot, but with the development of new technologies, gardeners switched to new material – plastic panels.

Similar ones are used to create a multi-tiered beds and structures with a curved or elongated shape.

Installation is easy, and it does not require digging grooves, just insert the panels into the ground. Such panels will last for many years, and will be distinguished by increased strength.

They have a number benefits:

• ease of installation. Such panels are easy to install throughout the site in one day, unlike wooden pegs or bricks;
• the material used in the manufacture of panels does not deteriorate under the influence of high and low temperatures;
• increased strength in holding the site;
• security. Plastic is not natural material, but it does not emit harmful substances to plants. Even under the influence of sunlight, the surface of the product remains safe;
• ease of care.

To care for such a fence, it is enough to wash off the adhering earth with a hose or wipe it with a wet cloth.

Wood

Wooden fences easy to manufacture, therefore, to cope with their manufacture is within the power of both a man and a woman.

This is one of the most common and sought-after materials that has proven itself for many decades.

The downside of this design is fragility. Wooden fences will have to be changed once a year, and sometimes every six months.

For the simplest selection of flower beds or garden beds can be used wooden bars . This design will last one or two seasons. It is used as a temporary structure.

The terrace board looks exquisite on the garden, but its price is high, and before installation it is important to decide what functions the material should perform: practical or aesthetic?

Finished wood borders coated with paint or a special compound for extra protection.

After installation, such bumpers attract the attention of neighbors and catch admiring glances, but over time the situation changes. After prolonged rains and abundant watering, the tree is covered with a layer of fungus and loses its former attractiveness.

Polycarbonate

Polycarbonate is installed by gardeners who care about the beauty of their beds, because this material can be purchased in various colors.

It is resistant to mechanical stress, but if you hit it with a hammer, a crack forms.

Its main advantage considered to be fire resistant. In an open flame, the sheet may undergo melting. The flexibility of polycarbonate makes it accept various forms. Most often used to create greenhouses and greenhouses.

You may be interested in how to make a polycarbonate fence and gate with your own hands.

Slate

The use of slate sheets significantly reduces the risk of damage to the fence by small rodents or natural phenomena. Increased fire resistance and the ability not to collapse under the influence of rain and snow made slate popular material for garden fencing.

What material will be better and cheaper?

The choice of material for installing the border is varied, if the gardener is actively involved in country life and can easily put up a new fence, when the old one is being demolished, he is advised to choose wooden fences for the base.

If you want the fence to be cheap and sustainable to various damages and temperature changes, of course, you need to opt for plastic panels.

If it is not supposed to constantly transfer the protective material from one bed to another and you want to achieve strength and durability, it is better to choose slate. It does not take much time to install, and its cost is low compared to other types of materials.

Optimal box height

boards at the curb must be at least twenty-five centimeters if the beds are located on flat surface with fertile soil.

For soil with abundant moisture or, conversely, with dry soil, you need to raise the fences at least thirty or thirty-seven centimeters.

Very wide sides are impractical, unless, of course, they are part of an individual garden improvement project.

Bed length determined at the discretion of the owner: it can be from one meter to five meters or more. It all depends on the area with its dimensions. Depending on, the plot line can be increased or, conversely, there is no such possibility.

Gardeners love to make boards with transverse beam in order to sit down after work, but this is wrong. Water that will enter the beam contributes to the decay of the material. The best option there will be a rest on a folding chair brought from home.

Slate Installation Instructions

After the roofing of the roof, pieces of material often remain that can be used in the design of the beds.

It will need to work slate, metal bars and shovel. Before starting work, the slate should be prepared: you need to cut the material to the height required for installation. For this you should use circular saw with stone attachment.

The standard sheet of corrugated slate is one meter seventy-five centimeters. It is cut into as many pieces as necessary to create a barrier between honey beds.

The cuts will be even if you use chalk and draw lines.

The soil is also prepared for installation. The soil is watered abundantly, especially in those places where it is planned to put the material. A trench is dug around the perimeter of the proposed beds and metal rods are inserted.

The prepared pieces of the product are inserted around the perimeter of the beds in such a way that for the wave to overlap, a upper edge pressed with a bar. At the edges of the product, columns of reinforcement are installed to give stability to the structure.

When installing, observe the diagonal and with the help of a level. When the material is installed, it is compacted and sprinkled for greater stability, and excess pieces of earth are removed.

Spacing between rows carefully seal, and free areas should be covered with concrete or gravel.

When working with slate the following rules must be followed:

1. Slate can be sawn both in two halves and in pieces. The width of the beds will depend on the cut option.
2. In order to prevent the material from spreading in different directions, it fastened with metal corners, which are further treated with an anti-corrosion coating.
3. Work on the installation of slate must be carried out with care so as not to damage the skin of the hands and the material. metal corners can close with plastic bottles.

Installation of beds from plastic panels

plastic panels serve the landlord long years , unlike metal and wooden beds. It will not rot and decompose in the ground, which is important for a reliable product.

Gardeners are happy to use such material, primarily due to its low cost. Installation of panels should be done by a novice master by competent scheme excluding inaccuracies.

The installation of beds from PVC panels should begin with measuring the future space for planting and, if used plastic tape, it must be cut to the desired size.

If the choice is made in favor of plastic fence, then the excess parts need to be cut off. It is necessary to saw in accordance with the measurements so as not to damage the excess part of the surface of the material.

If plastic tape is used, its cut parts are connected with each other with a stapler. In other cases, such an operation is not required.

Trench for tape done with a shallow depth; for other types, a trench is not needed.

The plastic tape is immersed in a pre-dug ground, and this completes the installation of the panels. When choosing other plastic elements, for example, such as , his needs to be strengthened from the edges with metal pegs for structural reliability.

Without installing fence pegs won't last long, and its further replacement cannot be avoided.

How to make inexpensive framing of beds using a border tape, see the video:

Fencing with metal structures

Metal fences for the beds give it the shape of a rectangle. For work it is allowed to use the remains of metal and corners. The edges can be bent with special tools or a cut hose can be put on the edges of a metal product.

An important detail: the treatment of the material with a special anti-corrosion compound to avoid its premature wear. For these purposes, paint is also suitable.

You can buy ready-made beds to be assembled as shown in the instructions. Manufacturers claim a high service life of such products - more than twenty years. But much cheaper and nicer to build similar design on one's own.

The work will consist of several stages:

You can install it yourself by following sequencing A: The length of the product should be within three 4-6 meters. The height is better to do from 35-70 cm.

High sides will protect plants from the access of animals that do not really care about the well-being of vegetables in your area.

Before installation, you need to determine the shape that the future bed will take. From this depends on the amount of material to create a structure.

1. At the corners of the proposed perimeter of the beds hammer metal pipes.
2. Along the marked area under the bed pull the rope.
3. At the location of the fence dig a trench with a maximum depth of 10 cm.
4. Strips of metal are inserted into the trench and strengthened from above with hammer blows.
5. On the outside of the product set the pegs for additional support.
6. Whole structure connects welding machine if the novice master does not know how to use the welding technique.

It is allowed to use a drill on the surface of metal and screws. It is the design made by the drill that will help to transfer metal fence to another location if needed.

7. The resulting design sprinkled with soil for additional fixation.
8. In the resulting box stack dry tree branches, leaves and bushes. Next, pour the soil with additional fertilizer in the form of compost.

Important to remember that the metal edges of the product can harm the skin of a person or the clothes of a gardener. To improve safety on the site, it is recommended to use plastic bottles to close the border around the edges.

Any of these fences can be made if you study in advance all the rules for installing and caring for this decorative product.

The video below demonstrates the installation of a finished galvanized steel structure, which you can buy in a store and save time on self-production:

Many summer residents are interested in the topic - whether to protect their beds. Those landowners who have fairly dense land on the site and it does not crumble rarely enclose the beds. It’s just that when creating them, earthen sides are tightly nailed with a shovel. This work is quite labor-intensive, it is not easy to make neat sides of the beds, skill, experience and physical strength are needed. Then weeds will begin to grow on the sides, weeding which takes a lot of time. But what if you spend some time once and build attractive garden fences with your own hands? Let's see what bumpers are and how this idea has taken root among the people.

Is it worth it to "fence the garden"?

AT last years the so-called "new dacha residents" appeared, promoting modern trends in dacha science. Someone forms their beds not with a mound, but on the contrary, with a small recess, someone plants horticultural crops according to a complex scheme - combining certain plants on one bed. And someone has already blocked their site with neat rectangles - bed borders made of modern materials.

I must say that this was not invented yesterday. Back in the last century, gardeners made boards for beds, but mainly from boards. Why is this method bad? Firstly, the boards for edging are not taken new, they are not bought in construction stores, but used ones are used: from old buildings, slabs, sleepers. Accordingly, these boards very soon become unusable. They rot, crumble, bugs live in them. From frequent watering wooden boards deteriorate quickly. If you want to edge your beds, use another material that is resistant to constant dampness.

Important:

Wooden boards are completely unsuitable for edging beds. Plant pests live in them: aphids, mites, as well as fungus and mold.

Slate, iron, brick and stone: which is better?

The main requirement for bed borders is resistance to dampness, because in summer watering is done every day. In addition to old boards, borders from other improvised materials came from the last century: slate fragments, concrete blocks, bricks and metal sheets. Of course, these materials are more durable and safer than wood, but they are not always aesthetically pleasing. Consider the pros and cons of the most popular "protectors".

Slate

Slate advantages:

1. Free, since it is usually used removed from the roof when replacing it.
2. Conditionally durable. Lasts longer than wood, but less than other materials. That part of the slate, which is dug into the ground, darkens over time and becomes brittle, that is, it collapses.
3. Looks neat.

Cons of slate:

1. There is information that slate contains harmful substances.
2. Fragile. In case of an accidental hit with a shovel, the slate side will easily crack.

Wood

Since wooden borders are still popular, consider them. Wooden bumpers in the country are good because they naturally and harmoniously merge into the surrounding nature. The most durable are square thick bars stacked in two rows on top of each other (photo on the right below). Such a simple design is easy to build with your own hands. You can sit on the upper edge of the bar when weeding. To make such a fence last longer, be sure to impregnate it with a protective compound.

brick and stone

The edging of the beds can be made of brick, white or red. Probably, you should not buy bricks specifically for this purpose, but use the old ones. The brick laying technique used to be like this: the bricks were simply torn into the ground. It turned out to be a rather shaky building. If you like the idea of ​​brick sidings, it's best to do the masonry by cementing the bricks together. This border will last a long time. Masonry very picturesque and attractive. It is better to use flat stones, laying them on top of each other and fastening them with mortar.

Polycarbonate

Greenhouses and greenhouses are built from polycarbonate. It is a matte hard texture, resistant to shock, fire (polycarbonate products do not burn, only melt), atmospheric phenomena. Polycarbonate is a durable, reliable and expensive material. Of course, it is unlikely that the sides are made of polycarbonate, they are covered with greenhouses. But there are beds in greenhouses, so we will also refer polycarbonate to fences.

garden board

Initially, this product was intended for fencing flower beds and flower beds, but vegetable growers also appreciated the garden board. Its bright summer colors, ease of installation, durability of the plastic from which it is made attract more and more new fans of country aesthetics, as you can see by looking at the photo below.

This is perhaps the most easily assembled type of fencing with your own hands. He unfolded the roll and edged the bed (pictured). Advantages of the tape: strong, light, bright, stylish, durable. Cons: if the tape is made of cheap plastic, it will crack in the cold, so it is better to remove it indoors for the winter.

Mobile garden fences

Opponents of fencing say that the beds should not be stationary, they need to be laid every year in different places and under different angle to the sun. For such summer residents there is a way out - mobile bumpers. They can be made by hand. A sheet of metal profile is taken, cut into wide strips, and wooden pegs are screwed onto the screws on the sides. The pegs are stuck into the ground, and the profile is flush with the ground. For the winter, the sides are removed. True, where can I get so many profiles ... But as an idea - excellent.

We talked about different types bumpers for garden beds. Which one is better? How many summer residents, so many opinions. Many people think that metal and concrete are not needed in nature, this is enough in the city, but in the country let there be grass, flowers and natural materials. What do you think?