Despite the fact that the peak of popularity of the anti-stress toy, fashionable in 2016-2017, began to subside, many are still looking for ways to create an original little thing that will help to have fun on long trips, long lines or in difficult life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - more in our material.
fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children around the globe. Its main purpose is to occupy and distract . Someone thinks that spinner useful , because thanks to him you can distract from everyday and psychological problems, relieve irritability, get rid of excitement. Others claim that thanks to the turntable you can focus on the right things, distracting from everything superfluous. Be that as it may, the glory of the toy needs no explanation, because literally everyone loves it.
There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on the component parts available in stock. To understand the specifics of the work when creating a do-it-yourself spinner, you need to know just a few important points.
The obligatory traditional elements of the spinner are:
The most important part of a spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its soundtrack and vibrations emitted. In many homemade toys, bearings are often replaced with primitive toothpick designs. , which also allow the wings of the toy to spin.
Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas, show individuality.
The so-called spinners made of plastic, metal, wood, cardboard and many other materials. Often materials are combined. Recently, plastic or metal toys with luminous wings.
The design of many do-it-yourself spinners is amazing. Many decorate their toys with interesting engravings, illustrations, badges. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.
Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But in order to stand out from the crowd, you need to make a certain effort, for example, to make an original thing with your own hands for yourself or your child, relative, friend (for example, as a gift). If a kid asked for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with the creation of a memorable toy.
Before you start working on your spinner, you need to have an idea of what exactly the person wants to get as a result. So that the result does not disappoint, you need to work according to a simple scheme.
Since there are countless possible models of spinners, and we are all different, and we like different things, for starters, you can choose the right model from the simple ones. This is necessary so that the process does not turn into a punishment. Or you can go the other way and choose the most original model from a special material with an unusual shape. This option is suitable for those who have already tried to create things with their own hands.
To make it work, you should take care of the drawing on a scale of 1: 1. You can draw a future spinner model on paper, or you can search for finished drawings on the vast expanses of the Internet.
Now that the creator has decided on the design, and the schematic image is ready, you can begin to prepare all the necessary materials.
The first step is to purchase (or remove from old equipment) a bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it is in the toy. Why clean the bearing from grease? It makes the rotation slower, besides, it stains hands, clothes and furniture.
In addition to the prefabricated parts of the spinner, you will also need the following tools:
When the preparation is over, you can safely start making a toy with your own hands. Next, consider several popular options for creating spinners from various materials in several ways.
The most popular option for those who are in no hurry to run after the bearing and cut squiggles out of metal or wood is to make the first simple spinner out of cardboard and paper. Doing it yourself is really easy, and if you show a little more imagination, then a simple cardboard box can turn into an original canvas for your favorite icons or drawings.
Tools for work:
You can watch the video step by step:
Another simple way to create a do-it-yourself spinner, which will take a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here is a little step by step guide.
Tools for work:
Working process:
A wooden spinner is the most pleasant and affordable option that you can create with your own hands. A real labor lesson for adults and children!
Tools for work:
Working process:
To get comfortable with creating a do-it-yourself spinner, you can check out some video tutorials on this topic. The conditions of creation can be very different, as well as materials and styles, but a home spinner can turn out to be no worse than a factory one.
Here is another way to create paper spinners, this time in the shape of a shuriken :
Minimalistic spinner made of bearings and clamps:
And here is a great version of the "turntable" for girls:
If you are reluctant to buy spinners in the store, feel sorry for hard-earned money, too lazy to wait for delivery, or just a creative impulse plays in your soul, then you can try to assemble the turntable yourself.
With even hands, the toy will turn out no worse, and often even better than the purchased one - after all, you put a piece of yourself into it.
1st method: we make a spinner from bearings
We need bearings, for example, from a skateboard. Before using the bearing in practice, it is necessary to clean it of grease, otherwise the turntable will rotate quietly, but not for long. This method is very simple, since you do not have to make a spinner body, all we need is four bearings.
They must be laid out in the correct form. In order to make this form accurately, use a squared notebook sheet. After we have a perfect triangle, we glue the bearings together with glue - best of all, superglue or cold welding.
Or you can draw a circle with a compass and divide it into 3 parts, like a Mercedes badge. Drawing and geometry lessons to help.
When the glue is dry, it is necessary to increase the bonding area, for this we sprinkle the glue with salt, then the area will increase and the bearings will hold each other better. At the end, we wrap the gluing points with any thread and impregnate it with glue, this will betray even more strength.
A few video instructions on how to make a spinner from bearings:
And another option without a rope:
2nd method: spinner with clamps
For the next method, we need two ties or clamps. They need to be inserted into each other. After that, we place three bearings in the center of the ties and tighten the ties until they are firmly held.
Cut off the protruding ends. In principle, at this stage, the spinner is ready, but it does not hold firmly. In the event of a turntable falling, everything will fly out of it. We don't need this, of course. Therefore, it is necessary with the help of glue to make it more reliable. In all places where the bearings interlock, where the ties touch the bearings, it is necessary to drip with glue.
Such a spinner, due to its high degree of gravity, spins for less time and not so fast, but it is easier to manufacture.
You can see in more detail how a spinner with ties is made in the video:
We need: six plastic bottle caps, a toothpick, a large gel pen refill, coins and glue.
To understand what we are talking about, watch the video where there will be step-by-step instructions on how to make a spinner from plastic bottle caps:
As a result, we already have a pretty good spinner, but in order for it to spin even better, it needs to be weighted. For this we will use coins. We take a coin and glue it to each of the corks. That's all, our spinner is ready.
1st way: from cardboard
We make a template for a spinner from cardboard using a plastic bottle cap.
For details, watch this video:
2nd method: paper spinner
To make such a spinner, we need two square sheets of paper and two pushpins. The assembly diagram will look like this:
We advise you to immediately watch the video, otherwise the instruction may seem too complicated:
More interesting articles.
Spinner, spinner .. Everyone seemed to have gone crazy. What it is? Where did it come from? And most importantly for what? Today we will try to figure it out ... It was invented by one person. Now the whole world is going crazy, people are buying, kids are loving it.
When I was little, I really liked to spin the top. You take out some bigger gear from an old watch and start turning it - who has longer? Familiar? You sit and watch .... Remember your feelings in childhood.
Approximately the same sensations arise when I rotate the spinner. Spin and look. Yes, and a spinner is essentially a spinning top. Only the top is on the axis. A spinner is twisted in a horizontal plane. The Anglo-Saxons like to use the word "spin" (rotate, turn).
They have "spin" everywhere - from quantum mechanics and physics - to this simple thing. Terribly simple. And we have a top, and many other analogies ..
Who rewound the cassette with a pencil, that spinner does not buy!
Time does not stand still. Our children no longer know about all sorts of tape cassettes and spinning tops. Here's a newfangled thing. And there is every reason to think that the spinner will soon turn into an element of style. Maybe soon we will see spinners not only with LEDs, but also gold, with rhinestones, maybe even with diamonds ..
It's such an interesting time right now, you can expect anything. If there is a demand for platinum spinners, I will not be surprised. Online stores are already selling products for 3,000 rubles with might and main ...
Structurally, the spinner is very simple. Imagine a star with a bearing in the center. Star petals are balanced. In each beam, you can also insert a bearing. And twist yourself. Let's add brightness with the help of bright colors and, behold, the spinner is ready.
It is necessary, of course, for entertainment and during idleness. If you are in the "trend", then of course, in order to remain fashionable and stylish. Initially, it was conceived as an anti-stress sedative. Which is true. It can be twisted in different ways - on the table, in the fingers, on one finger ... While it is spinning, you watch how it does it, and at that moment your head becomes completely empty ... And this is rest, friends. Let for a minute, but rest.
All your attention is switched to the spinning petals. Maybe for this reason, in our age of stress, this simple children's toy has become so popular all over the planet ... Who knows? Children are very fond of spinners for their brightness and for this very thing ... Now many sellers are serving this attractive product as a kind of "remedy". Here's what the sellers say:
So, if you want to relax and get an expensive exclusive product, then go ahead to the online store. I am sure that we are very eagerly awaited there. But Russia is such a unique country. Our man cannot sometimes reconcile himself to go out and buy this simple thing. Our man does it himself.
Because when you have made a Thing yourself (even the simplest one), there is a completely different attitude towards it. It’s always a pity to throw away such a thing, for example ... By the way, when you make something yourself, it also sometimes relaxes and distracts. We will make a spinner with our own hands to be distracted and experiment 🙂
Materials friends, can be very different. But the principle is the same - in the center is a bearing. In order to ensure long and easy rotation, the toy must be balanced, and the bearing must not contain thick grease. Here is one of the production options:
You need to buy four bearings (three will be as counterweights)
You will need a drill for wood, (perk) with the same diameter as the bearings:
Still - we need the material itself, from which the case is made. He can be anything. The main requirement is strength, and easy handling.
We mark the material with a pencil like this:
We continue to rotate the drill (the same spinner):
Let's make additional holes with a regular drill (for an intricate design):
The workpiece should be drilled like this:
And before fitting the bearings into it, look something like this (if you can work beautifully, you should try to somehow round the corners):
It is necessary to prepare the central bearing, remove the factory grease from it.
After removing the protective covers from the clip, rinse it in gasoline or acetone:
Then you need to use a suitable glue (superglue does not glue all plastic!) Epoxy or another, carefully glue the bearings into place.
Something like this:
Here is such a brutal, "masculine", harsh, spinner turned out.
Watch the video of the production from start to finish:
As you can see, everyone is experimenting as best they can :) :). There is no limit to perfection! There would be a desire. Both samples spin well. More effort goes into good design. Hooray!
According to my feelings, the purchased spinner cannot be broken. The bearing is pressed into a metal housing; counterweights are glued or pressed. The weakest link is the bearing. It can rust if children drop it and rinse it in water.
It is clear that if the spinner is homemade, as in the example, we simply lubricate and develop the bearing until all the rust comes off. We re-glue the bearings that have flown out with normal glue. In severe cases, we use a rust converter and lubricate until the previous “driving” qualities return. In the case of a purchased spinner, carefully remove the cap or cap, which are always present there:
We apply liquid household lubricant for locks to the clip and so on. If there is a lot of rust, you can throw it into a jar of oil, let it lie down .. That's the whole repair.
In the wake of the general enthusiasm for the toy, experiments continue. Someone again connected two different directions and they began to make spinners out of paper. By the way, just such crafts develop motor skills and everything else in children.
Therefore, you can captivate your child just by making such original things. From paper, it will be safe for the child. True, a little disposable. Color paper:
Action one:
Action two:
Action three:
Action four, axis:
Action five, the same “bearing” made of paper, which confirms that the Japanese are creative people 🙂
To understand what's what, watch the video.
Beautiful. And it's fun to do those things.
Our people are talented and resourceful. All in the economy! We don't throw anything away! We choose brighter and newer!
Everything is simple, the principle is the same, the material is different.
We do it once:
We do two. It is necessary to drill and clean a hole at the bottom of the cover, and glue:
We glue only three corks, the rest are used to align and symmetrically the first three. It should turn out something like this:
It is necessary to bring everything into a divine form and then begin assembling the product. We also rinse the bearings in acetone and then assemble them.
When everything is inserted, glued, check:
It works.. 🙂 But, friends, this is the easiest way. There are quite exotic but interesting ways to make spinners from plastic corks. Watch the video.
As they say, there would be a desire. It remains to be said that in any creative process there is no limit to perfection. Make a spinner out of wood, metal, cardboard, concrete..
As long as ball bearings are produced, we can do anything. Any creative work gives pleasure to those who do it. Do it with pleasure, and then everything will turn out well for you. See you on the blog pages. If anyone has links to interesting options for a homemade spinner, please leave in the comments.
All social networks are filled with photos of all kinds of spinners, so there are no problems with the question of what it is. Moreover, this rotating thing has become a trend in 2017, and the variety of their types, options and possibilities will not leave anyone indifferent.
There are turntables of different price categories from 29 rubles to several hundred thousand, but it is becoming more and more popular to make them yourself. It is more interesting and cheaper, and "your" toy is also unique and unusual. How to make a spinner at home - read this article.
The spinner is an original fashionable anti-stress toy, also called a hand spinner and spinner. Its device and mechanism of action is simple: in the center there is a metal or ceramic bearing, and around it there are several blades or weights.
True, toys are now being modernized with might and main, experimenting with colors, materials, shapes, speakers, and even embedding a Bluetooth system for synchronization with a smartphone. Glow-in-the-dark spinners have also become widespread.
Both ordinary adults and psychologists argue about the functionality and benefits of spinning things. A consensus has not yet been reached, but most tend to believe that spinners have the following positive characteristics:
The danger of modern toys lies in its ever-growing popularity, as schoolchildren begin to invent and implement rather extreme tricks for the sake of spectacular videos. Also, turntables can distract from study, develop unhealthy competition.
However, if a child or an adult is on fire with the idea of creating a spinner with their own hands, then here we can only talk about its undoubted benefits. Indeed, in the process, motor skills, logical thinking will definitely develop, and fantasy and creativity will reach a new level.
Mentally, the whole process of creating a spinner can be divided into four stages: thinking through the design of the toy, drawing up a drawing and diagram, preparing the necessary materials and directly working on the product.
Each stage is important, so let's look at them in more detail.
Here you need to decide what your future spinner will be: classic or unusual, paper, plastic or iron, simple or complex, and so on.
Based on this, an algorithm for further actions will be built.
You can’t count on the eye, so it’s better to display your imagination on cardboard and remember your drawing skills.
If you don’t like working with pencil and paper, then go the easy way and look for ready-made schemes on the Internet, print out the one you like and start preparing materials.
The materials from which you can build a spinner are striking in their variety, which allows you to choose the most suitable option. So, the basis can be paper, cardboard, electrical tape, chips, coins, solid wood, children's designer or soda caps.
“Tools” will help in translating fantasy into reality:
The bearing can be removed from an old skateboard, a bicycle of non-functioning equipment (washing machine, printer, fan) or bought in a store where its price usually varies between 20-50 rubles. The diameter of the part is proportional to the size of the future toy, and a value of 2 cm is considered universal.
It is important to properly prepare the materials in order to enhance the capabilities of the product. So, bearings bought in a store should be removed from factory grease, since it is harmful for a toy: it stains hands and slows down rotation.
Extraneous plaque is removed simply: dust protection rings are removed, bearings are filled with gasoline to an unnecessary container and left in the liquid for several minutes, during which it is recommended to shake them.
When the choice is made and the tools are collected, you can get to work. Below are the simplest and lightest designs of spinners, having understood the structure of which, it will not be difficult to improve the technique with other materials.
In the simplest model of a turntable, the bearings are replaced with an axle, and the solid body is replaced with paper or cardboard. Making a paper spinner is easy and fast:
Spinners without bearings also include cardboard products. For a three-blade model, we make a drawing of four circles in the shape of a triangle on cardboard, cut out two copies, as well as four smaller circles. On one half we place coins of suitable diameter and glue them, and fix the upper part on top.
With nail scissors we make a hole in the structure and similarly in two small circles.
We put 1 cm of the plastic rod of a ballpoint pen into one of the circles, fix it with glue, put the rod into the spinner and close it with the second circle. The remaining third and fourth circles are fixed from above.
A more complicated version is a model assembled from plastic bottle caps (from 4 to 7 depending on the number of blades) and four bearings.
You will also need tools: glue gun, drill, knife, sandpaper.
The technology looks like this:
Instead of making or buying a new spinner, you can always fix the old one.
Failure is usually of two types: damage to the housing and contamination of the bearing.
In the first case, any super glue will come to the rescue, you can clean the metal ball with WD-40 and alcohol, not forgetting to eventually lubricate the bearing with synthetic oil. In general, the following algorithm should be followed:
Everyone can make a spinner at home, because its device is clear and simple, and any available materials can serve as a body and a rotating rod.
It’s better to start with paper models, gradually improving your skills, and who knows what features and capabilities you will enrich your toy over time?
Spinner mania has taken hold of both old and young. Once I noticed an unusually shaped spinner in one adult, as it turned out - it was homemade. Without thinking twice, I wanted to repeat this homemade product in order to conquer my friends with an unusually shaped trinket.
I will tell you in detail what and how I did.
I needed to make a spinner:
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom