What can be done from the top of a plastic bottle. Crafts from bottles to the country (39 photos): decoration of flower beds and garden beds, planters

Helpful Hints

7. Lift the fabric and thread the string through it.

Master class from plastic bottles. Mobile phone holder.

From a plastic bottle, you can also make a good and very useful mobile phone holder. It is needed when you urgently need to charge your phone, you have found an outlet, but there is nowhere to put the phone.

Prepare a 0.5 liter plastic bottle, and pierce a hole with a knife to further cut off the unnecessary part of the bottle.

Using scissors or a utility knife, cut out the circle for the fork.

It remains only to insert the cord from the charger into the "neck" and plug it into the outlet.

Master class from a plastic bottle. Chandelier.

You will need:

50 plastic bottles (volume 0.5 l)

flower wire

plain wire

Bulb

Paint can

Glue (glue gun is better)

Scissors

Stationery knife

1. Prepare plastic bottles and remove labels from them.

2. Cut each bottle in the shape of a flower (see picture). To do this, use a clerical knife.

3. Spread the "petals" of flowers.

4. Once you've done steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint, or you can spend a little more time and paint each flower with acrylics. You can choose any color. You can also vary the colors by making some flowers one color and others another.

5. Make a circle from ordinary wire. Wind the jute, and use a glue gun to glue it to the wire. You will get the base of the chandelier to which the flowers will be attached.

6. Using flower wire, attach each flower to the circle you made from the wire.

There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.

Here is what the first layer looks like.

7. Repeat all steps to make multiple layers. In this example, 3 layers were made.

8. Attach the chandelier to the ceiling using jute (see picture).

What can be made from plastic bottles. Sprinkler.

Just make holes in the cap of a plastic bottle with an awl or a nail.

Products from plastic bottles. Funnel.

Plastic products from bottles. Money box.

1. Prepare a plastic bottle. Wash it with hot soapy water and leave to dry.

2. From colored cardboard, cut out details such as ears, eyes, a snout and nostrils.

3. Use glue or double tape to attach all the details.

4. Wrap the bottle with patterned paper.

5. For legs, you can use empty coils that need to be glued to the bottle.

6. Make an incision at the top for coins.

We make a dispenser for plastic bags from a plastic bottle

You will only need one 3 liter plastic bottle to store your plastic bags.

Simply cut off the bottom of the bottle so you can put bags in, and the neck so you can carefully remove one bag at a time.

You can use sandpaper to make the edges of the bottle more even and smooth.

We make bracelets from plastic bottles

You will need:

Plastic bottle

Adhesive tape (the width of the bracelet depends on the width of the tape)

Double-sided tape

Felt (or other material)

Scissors

Stationery knife

Decorations

1. First, wrap the bottle with duct tape. Make several "rings" as shown in the picture. Everything needs to be done neatly and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.

2. Using a utility knife, carefully cut off each ring.

3. Carefully remove the adhesive tape.

4. Glue double-sided tape to the resulting plastic bracelet.

Plastic bottles are not just a container for water, but also an excellent material for creativity and. Some craftsmen manage to make something out of them that is difficult for many to imagine. All you need in this business is the actual material, scissors, sometimes paint, glue and free time. Also, it would not hurt to turn on creativity and stop looking at the container from under your favorite soda as an ordinary thing. So let's get started!

Piglets-pots

This craft is easy to make, so that's where we start. In this, you can plant flowers for the summer or use piglets as. This will revive anyone, especially children will be happy with this creation.

Tools and materials:

1. Five liter plastic bottle. Their number is according to the number of piglets that will be created. 1 container - 1 pig.
2. Sharp knife, most convenient stationery.
3. Bottles - 0.5 l or 1.5 l, 4 pieces for each piglet.
4. Glue.
5. White enamel and red or pink paint.

Manufacturing sequence

The container must be rinsed and dried, and if there are labels on it, they should be removed, as they will interfere. If you decide to make a planter, then cut a hole in the upper part so that there is where to plant flowers and pour earth. If you are creating a garden sculpture, skip this step.

The smaller bottles will be used to create the legs. They need to be cut from the neck by 10-15 cm or to the length that is needed.

Advice! The more hooves you make, the higher the piglet will be. Moreover, the containers should be selected of the same volume so that the limbs come out even and beautiful.

Advice! In order to make it more convenient to glue the legs, cut each neck in the widest place with a fringe and bend its edges.

Now the important task is gluing. For this you can use:

• Glue "Moment".
• Glue "Titan".
• Thermal gun. It is most convenient to work with it, although the plastic can be deformed from hot silicone, so it should be handled with extreme care.

Advice! It is more convenient to glue two limbs, since after applying the adhesive, they need to be held for some time for high-quality bonding. Use glue according to the instructions.

After everything dries, you can cut out the ears, they will be from the same material as the entire piglet. It is convenient to cut them from the lower parts, as there is a factory bulge there. The shape is natural, the size is arbitrary. For ease of gluing at the bottom, you can also make a fringe - like on legs.

On a note! It is most convenient to glue if you are making flower pots. The cuts in this case must be glued to the container from the inside with the same composition.

Now the creative stage - painting. natural color - pink, but you can use another if you wish. Experienced craftsmen advise using it, it fits well on plastic and is more durable. You need to tint only on the outside, but carefully so that the color of the bottle does not shine through. It is very convenient to hold the lid-piglet. Do not forget to cut and glue the tail, it is also made of plastic, it is more convenient to paint it before gluing. Eyes can be drawn or bought, these are sold at any sewing store.

Important! If the piglet is to be used as flower pot, it is necessary to make holes in the lower and side parts for the free outflow of water.

Fly agaric for garden decoration

A detailed master class on making fly agarics from bottles is on the video:

Plastic bottles have firmly taken their place in everyone's life as disposable containers and their use is only in the form of containers, but we can get much more benefit without throwing them away. For most people, a bottle is useless, but if you're smart, you can find many ways to make life easier and save money with bottles. Can be made from a plastic bottle almost everything, you need the bottles themselves and a little imagination.

Irrigator for the garden.

One of the simplest ways is useful apply the bottle in the vegetable garden or garden- make her garden sprinkler, to make it nowhere easier. We attach a plastic container to the garden hose and make several small holes, then we tightly fasten the hose to the neck. In this way, we made a watering can for the garden.

Advice.For convenience, use a square container or secure a round one with a heavy object.

It is not uncommon that the charger wire is missing from socket to place where you can put a mobile phone, everything can be fixed by making a clumsy holder for your mobile phone. It is necessary to cut the bottle diagonally, take the bottom and cut a round hole for the outlet in the upper part. Now the phone will lie in the bottom with the help of a socket.

Advice.It is better to cut the bottle as close to the top as possible, this will allow you to hold the phone more securely.

You lose every time stationery, you have to look for them, you need to make an easy-to-make stand. In addition, the bottle will need a bolt with a nut. You need to cut off the top and bottom after drilling a hole in the plug and the bottom and connect with a bolt and nut. It will be convenient to use this because it turns out 2 departments. Pens and pencils will fit in the upper section, and paper clips, buttons, graters will fit in the lower section and you won’t have to get your pens because of the little things.

Advice.Tighten the bolt with the nut loosely, then the top can scroll.

empty canister with manual it is not necessary to throw it away, it can be useful if you do not need it or it has become unusable, it will turn out scoop. It is necessary to mark the canister with a marker as in the photo and cut it.

Advice.For convenience, make the bow of the scoop square.

Glass jar lamination.

We use glass jars for different purposes and you have to mark them in all ways, but the inscriptions do not stick well on the glass, and the glued pieces of paper quickly become unusable, and laminate no possibility. With the presence of an industrial hair dryer, this problem is solved forever, while the strength of the dishes will increase. If you break it, you won't have to pick up the pieces and cut your hands. Having shown imagination, the jar can be well decorated. It is easy to make, you need one bottle that is suitable in size and color and a piece of paper with an inscription or a picture that we want to attach. However, there is a way to do without an industrial hair dryer.

Method one.

We cut off the top of the bottle and place it on the bottom with the cork up, then put on the cork a jar with the inscription, put on gloves and start heating the industrial hair dryer. When the hair dryer heats up, you can begin to gently heat the jar in a circle, without stopping in one place. You need to take a stock, the plastic will settle both in width and in height. When the jar is tightly tightened with plastic, cut off the excess and heat the angular parts again, if all the parts have become even, the jar is ready.

Advice.Start heating the plastic from the bottom, gradually rising.

Method two.

We cut off the top of the bottle and put a jar with a glued inscription on the bottom. To heat the plastic in this case, we need a tall pot of water and a stove. The pan should not be full, otherwise the water will splash onto the stove. When everything is ready and the water boils, we lower the bottle into boiling water and begin to slowly turn it, holding the neck of the glass jar with tongs.

Advice.By holding the jar at an angle, the effect will be achieved faster.

Are you fed up balls of thread, confusing with each other and getting stuck in knots, the way out is simple - from bottles of any size we make a device for holding threads in one place. At the same time, the balls will be less rubbed, confused and stuck. You can make a holder with a mount on a chair or armchair. We cut the bottle closer to the neck, leaving a part that needs to be cut in the form of a rectangle to the bottom, after which we make a hole in the resulting tail according to the size of the cap and put it on.

Advice.The device can be suspended by making holes on opposite edges and threading through them.

With the onset of cold weather, all possible types of heaters are turned on in each house, and at the same time indoor air becomes dry and we begin to experience discomfort. Headache, skin problems, mucosal irritations and other inconveniences can be avoided by making a silent, simple, convenient and reliable indoor humidifier. For this you will need:

• adhesive tape
• Scissors or knife
• Strip of fabric or string
• 2 liter bottle
• gauze fabric

Advice.By pouring essential oils into a container, we get an air freshener.

Instruction

1. In the side of the bottle we make a slot of 5 × 10 centimeters, errors are permissible.
2. We hang the resulting bottle with strips or a cord on a straight upper tube entering the battery with the hole up and tightly fasten it with adhesive tape so that the bottle does not jump out and spin.
3. We smooth the gauze several times to get a rectangle 10 centimeters wide and a meter long.
4. We place the middle of the folded fabric in the hole, and wind the ends onto the battery pipe.
5. Pour water into the resulting container and moisten the wound gauze, this is the maintenance of the device.

Mosquito trap

From a two liter bottle making a mosquito trap. The trap will attract small insects by the results of fermentation processes, namely carbon dioxide. For manufacturing you will need:

• 1 gram baker's yeast
• two liter bottle
• dark fabric
• 50 grams of sugar
• 200 ml of water with a temperature not exceeding 40 degrees

We start manufacturing by cutting in such a way that the inverted neck fits snugly into the bottle and lacks water. Now, when the container is ready, pour out the sugar, yeast and fill it with forty-degree water, it should not be warmer or hotter. If the liquid is too hot, fermentation will not start due to the death of yeast bacteria. Water should be poured slowly and mix the mixture. Now insert the neck into the bottle in the manner of a funnel. In order for mosquitoes to come across, the trap must be covered with a dense cloth that does not transmit light or paper. Once in such a trap, mosquitoes will not get out. Insects will fall into such a trap for up to a week, after which we will change the mixture.

Advice.After preparing the mixture, put it in a warm place.

From several one and a half liter bottles we make a simple and extremely durable broom. It is convenient to sweep the floor and fleecy surfaces with such a broom. The rigidity of the broom depends on the number of cut pieces.

Manufacturing.

To begin with, we make preparations. We cut off the neck and bottom, dissolve the middle into flaps to the middle, no wider than two centimeters. You will need 4 of these, and leave another top with a neck. Now we put everything together, and cut off the top of the next bottle, put it on what happened and squeeze it. We take a strong wire and thread it through all the bottles along the edges. We put everything on the handle through the cork and fasten it with wire. For reliability, we drive a nail through the neck into the stalk.

Advice.Use copper stranded wire.

If in nature we did not have mugs you can easily make it out of a bottle. First, cut off the top, then cut out a square with a knife or scissors, retreating 2-3 centimeters from the top cut. We cut it evenly and with the expectation that the width of the remaining jumper will be the handle. Turn the top ring inside out and push the bottom through. Now we have a mug that can help us out in nature.

Advice.Without cutting out a large square, you can roll up the middle part and put a cork ring on it.

Create self watering flower pot just cut off the top of the bottle first, then the middle part, so that the top part goes in without touching the bottom. After carefully making a hole in the cork and threading a thread into it. The thread should come out 5 centimeters from both sides of the cork. Now that everything is ready, pour water and insert the top part similar to a funnel. Now we fall asleep soil, not forgetting to moisten it. The plant will absorb the right amount of liquid, this will simplify the care of plants.

Advice.Fertilizer can be added to the tank.

Arriving in nature you forgot cutlery nothing to notice them. To save the situation, a bottle, a knife, and a lighter will suffice. Cut out one of the five pieces of the bottom and a bit of the top in one piece after burning the edges with a lighter. You can use this spoon to eat and cook food.

Advice.Rinse the appliance after firing.

Not all refrigerators have vegetable cells and you have to store vegetables in a variety of ways, while the products beat, scratch and roll around the refrigerator. For convenience, use five-liter eggplants. Cut off the top and fill with vegetables or fruits. In this form, the products will not wrinkle and there will be significantly more free space in the refrigerator.

Advice.Store fruits and vegetables in separate containers.

During the cooking process, separate egg white or yolk. But they are not easy to separate, the yolk is very fragile and when it is punctured, it will mix with the protein. With the help of a bottle you can cheat. We split the egg on a plate, squeeze the bottle and bring it to the yolk. Unclenching, we will draw the yolk into it without damaging it. The method is suitable for cooking dishes, the recipe of which includes a lot of eggs, for example, the common French meringue dessert Meringue.

Advice.Rinse the bottle before use.

When a person has free time and imagination, any unnecessary thing will turn into a work of art. Many "skillful hands" use plastic bottle crafts as elements, as well as in the form of furniture. From colored bottle caps, mosaic panels are obtained, which cover the surfaces of walls, paths, fences.

The range of creative possibilities is so wide that you often don't know where to start. We will help you understand what is suitable specifically for your case and what crafts to decorate the empty space with.

Application of plastic bottles

After several attempts to make a souvenir from a plastic bottle with your own hands, your hobby will grow into a full-fledged hobby for one evening. It's so easy and affordable! There are practical and decorative uses for products made from plastic bottles.

Practical- This:

• storage containers,
• feeders,
• coasters,
• plant containers,
• furniture

and even carports, greenhouses, washbasins, outdoor showers, etc.

Crafts from plastic bottles - this and homemade furniture. In appearance, a rather complex design is mastered quite simply. The only condition is that there should be many bottles of the same type. Handmade armchairs, sofas and ottomans are not inferior in terms of comfort to classic factory furniture.

How to make an ottoman from plastic bottles: a master class

In decorative terms crafts from plastic bottles have a wider range

• figures from plastic bottles;
• lamps;
• flowers
• garlands, etc.

They have one important advantage - the availability of the material. At the same time, products made from PET bottles are highly reliable if the parts are correctly connected.

Often made from plastic bottles vases, pots and flowers.

In addition, using plastic containers, you can originally decorate the room by making an artificial bouquet. Roses, tulips or daisies are placed in a handmade vase. If desired, the composition is decorated with LED lighting. Thus, an impromptu flower will turn into an unusual night light.

What can be made from plastic bottles for the yard

There is always an empty lot in the country. Building a gazebo or an extension is long and difficult, but the “bare” uncluttered territory “cuts” the eye. Crafts from plastic bottles for the street will help decorate the courtyard. Using plastic bottles, caps and a frame, make beautiful tables with chairs. It will be easy to surprise guests with such garden furniture during a festive feast in nature.

In products from plastic bottles are included and bird feeders, which will not only decorate the summer cottage, but also help the birds survive in the winter.

Ideas from plastic bottles: lamp caps

From caps and cut necks, with the help of simple manipulations, original lamps that will decorate both the interior of the house and the yard. Unusual lamps are harmoniously complemented by plastic compositions designed in the form of exotic plants.

Learn to collect simple plastic bottle crafts possible within 2-3 hours. Dare!

Crafts from 5 liter plastic bottles

A bulky-looking container is also applicable for decorating an interior or yard. Large plastic bottles are often used to make pet figurines(pigs, bulls, dogs, etc.). Crafts from 5 liter PET bottles - a common decoration for summer cottages, flower beds and a playground. Therefore, there are many ideas with their use, and the most striking examples of plastic bottle products are collected on our website. simple but tasteful.

Application of 5 liter plastic bottles: master class

That only skillful hands do not make from unnecessary (junk) items. Crafts from bottles with their own hands are made for arranging summer cottages, playgrounds. And they look very attractive and original. Plastic is the cheapest and most affordable and very flexible material. From it you can create figures of animals, flowers, dolls, children's transport, borders. Some craftsmen use them in the construction of arbors, fences, greenhouses, garden furniture and even boats.

Features of plastic as a material

Many people throw away plastic containers, considering them garbage, but this is a unique material for crafts that will certainly find application in the household. Its features as a material for creativity are that:

• For the manufacture of crafts and work, you will not need any complex tools or devices, except for those that every good owner has in the house: scissors, sharp knives, candles, glue, stapler, drills, glue gun and so on.
• Not only the bottle itself will fit in the work. From the covers you can create colorful panels, paths, decorate old furniture with them.
• Thanks to the flexibility of the fluorescent bottle, even flexible structures can be created both indoors and outdoors.
• Crafts can have different shapes and sizes, so both very small bottles and large bottles will come in handy.
• Plastic is considered a safe material, so you can create crafts from it for playing at home or in kindergarten.

What bottles can be made for kindergarten or kindergarten

Creating characters and all sorts of figurines for children is a special area of ​​​​amateur creativity. It is advisable to do them together with them. So it is easier to accustom them to perseverance, to teach attentiveness, concentration, to develop imagination. Consider, using the example of master classes, how to create simple figurines and fairy-tale characters for children.

Chamomile

There are several options for making this delicate flower.

Option 1

White bottles are required for work. They usually sell their milk and should be picked up a little. In extreme cases, you can use transparent, but then repaint it in white. For each chamomile we need 3 bottles. All of them must have the same neck diameter, otherwise we will not be able to put together the magnificent parts.

We cut off the upper part (neck with a lid), just below the place of expansion. We do this with only two bottles, we leave one. It is desirable that the lid is yellow.

Cut out about 8 petals on each neck. Only so that they hold on, and do not fall apart. Bend them one by one in the opposite direction.

Let's start collecting the flower: we put on one of the blanks on top of the one that remained uncut.

Then the second in the same way.

We unfold and bend the petals so that the chamomile looks natural and lush.

We fix all three layers with a lid, we try to make it tighter.

Such flowers can be left as is, or you can paint them in different shades after assembly. They can be planted on a wire stem or attached to a fence.

Option 2

This daisy is more complex in design, but it also looks more natural and beautiful.

We cut circles from the cylinder of the bottle (about 8 cm in diameter, more if you want to create a large chamomile). Each will require three mugs

Each circle is subsequently cut into 16 strips and we form flower petals from them.

In the center with an awl, hot on fire, we make a hole.

A little later, when we collect the workpiece, you need to hold it a little over the fire. So the petals wrap themselves, creating the correct shape of a camomile.

We cut out the core of the flower from the yellow cover, pierce it and fasten it with wire with the inflorescence.

We make a sepal from a green bottle, also melt it a little over the flame.

We first attach the sepals to the stem, then three blanks of petals, the core and bend it with pliers so that the chamomile does not fall apart. After bending, we draw the wire through the sepal again and twist it with the stem.

The stem will be a wire, on which thin strips (about 5 mm) of green plastic are wound. In order for the layers to stick together well, they also need to be scorched.

If you want to create a whole composition, make leaves by cutting them out of green plastic, singe them a little, wind them around the stem.

You can bouquet and diversify the bouquet by combining them with cornflowers. Here you need blue plastic, the petals are cut out in the shape of cornflowers. A flower is going to be similar to a chamomile.

With this technique, you can make any kind of wildflowers, and even roses, if you can roll them correctly.

Option 3

Now let's try to make a giant daisy.

As you can see, to create such wonderful decorative flowers, it will take only a few hours of time, a bottle, an awl, a candle, glue and scissors.

Penguin

Plastic Coke bottles are useful for creating a penguin, due to their narrowed shape in the middle and expansion at the bottom, a believable penguin body is obtained from it.

Tools and materials:

• 2 bottles of the same size;
• scissors;
• cool gun with silicone pencils;
• brushes;
• black marker;
• a piece of dense fabric;
• white, black and red colors.

Step by step penguin assembly:

• We cut the container in this way: the first, acting as the bottom, is cut in the middle or a little closer to the bottom, the second is the top of the penguin, so we only need the bottom. Rice. one
• Now we connect both parts with slices to each other. Fig.2
• When connected, fix with glue (you can use a silicone gun). Fig.3
• Next, according to the plan, we will paint the body of the penguin. Select the type of paint so that it is not afraid of moisture. We paint the future toy in several layers. Rice. 4
• When the paint coating dries, outline the chest and muzzle with a black marker. Fig.5
• Paint over the outer part (behind the contours) completely with black paint. Leave only the top - this will be the place of the cap. Rice 5. and 6.
• In principle, the penguin is almost ready. It remains only to paint the place left under the cap with red paint. You can, as shown in Figure 8, decorate it with black dots.
• Draw eyes and a beak on the muzzle. This can be done with a thin brush and paints, or you can use colored markers. Rice. nine.
• Cut a scarf from a small piece of fabric, tie it on a penguin.

Crocodile

Let's try together to make another toy for kindergarten - a crocodile.

Prepare for work:

• two plastic bottles, 0.5 l;
• twist plugs from the same container - 4 pcs;
• sharp knife;
• stationery scissors;
• thin cardboard;
• glue;
• brushes;
• waxed paper;
• paints for drawing;
• eye buttons.

Manufacturing and assembly instructions:

Cut the bottles first in half, then so that a distance of about 7 cm remains to the neck.

It is necessary to form the edges so that the body of the crocodile is slightly bent during assembly. As shown in the photo.

Glue the covers in place of the legs.

Form dense balls from cardboard - eyes, attach to the body.

Cover the entire body of the alligator with green colored paper.

Cut out eyes, teeth, paws from paraffin paper.

Paint the teeth (white), nostrils (black), eyes (also black) with a brush, or use dark buttons as eyes.

bees

These funny insects are very easy to make.

Option 1

Prepare ahead of time:

• plastic containers with a capacity of 0.33 l;
• sharp scissors;
• acrylic paints;
• cup 0.5 l;
• brushes;
• glue;
• black tape;
• wire;
• stationery knife.

Instructions for execution:

From a plastic cup, cut out the wings of a bee, as shown in the photo.

The bottle does not need to be cut completely. We make only small cuts on the sides, with a clerical knife. These will be the placement of the wings.

Insert the wings into place, glue them.

Next, proceed to painting the bee. There are two ways to paint: paint the body black, then make yellow stripes, or vice versa, make it completely yellow, then draw black stripes. Let's use the first one - paint it dark.

Draw the eyes in white on the lid, and the mouth in red.

Option 2

You can make it in one copy, you can create a whole hive

To create a hive, prepare:

• plastic bottles according to the number of expected number of bees;
• yellow enamel or paint;
• black electrical tape;
• wash brushes - 4 pcs;
• for the eyes - beads or buttons;
• glue gun;
• synthetic thread;
• leg-split.

We paint plastic bottles yellow. You can do it a little differently - pour yellow paint inside, twist the bottle so that the paint evenly lies on the entire inner surface.

This method is a little more difficult and longer, but the coloring will turn out to be more effective and with gloss. In addition, it will not wear out, break or deteriorate.

This should be done in several stages to evenly paint the entire surface. Fill the bottle with paint, shake and lay on its side. As soon as the first layer of paint begins to set, twist it to paint the next area and so on until the end.

When the bodies of the bees take on a yellow color, we make transverse strips with black electrical tape.

On the lid we glue eyes, a nose from pre-prepared beads and buttons.

From another plastic container, we cut out shapes that look like wings. To them, at the same stage of work, we attach threads. For them, we will then hang the bee to the tree.

To the body of the bee, with the same glue gun, glue the thread with wings.

Color it yellow too. You can, again, use the complex method of painting. Or, in order not to lose a lot of time, just paint on top with a brush.

We will make the roof of the hive from wash brushes. We take them in a pile, tie them with twine.

On the lid of the bottle - this is our roof area, we apply a thick layer of glue. We spread the wash brushes on it so that they are evenly distributed on all sides. If somewhere they are a little unstuck, glue it.

Leave the craft for a while at rest to dry.

Everything is ready and the bees and the hive. It remains only to take it to the kindergarten and hang it on a tree.

In a similar way, you can make many bees, but without a hive and hang each one from a tree. Thus creating a real children's beekeeping center.

Creating bee crafts is an interesting activity, the work is not difficult. If the child himself makes it, under your strict guidance, it can be a good souvenir for grandparents. Such a craft will look very impressive against the background of the abundant foliage of a tree.

butterflies

Simple in execution and very interesting model of crafts.

Option 1

Let's prepare the materials:

• plastic containers (a few pieces will be enough);
• paper, not smaller than A4;
• stationery scissors;
• silver and brown nail polish;
• sequins;
• gel red pen;
• rhinestones;
• butterfly in a stencil.

Let's start making the insect:

First, let's prepare the bottles for work: wash, preferably with soap, release it from the label, dry it.

On a blank sheet of paper, scan or transfer the figure of a butterfly through carbon paper. For this we need a stencil. You will find it at the end of this subsection.

With a gel pen, you need to circle the contours of the insect on the plastic surface and cut it out.

We got a figure with wings curved down.

Turn it over, we need them to look up.

We take the gel pen again and draw all the lines, as shown on the stencil.

Paint over the middle (trunk) and antennae with silver nail polish. Let's draw the contours of the wings in the same tone.

Now with varnish you need to draw all the rulers, including the smallest ones, which were previously drawn with a gel pen.

Before the edges we put small dots (blotches).

Against the background of the silver drawing of the wings, we also put dots, only in brown.

We decorate the body of the butterfly with rhinestones. To do this, with any nail polish, put droplets and plant a pebble on top.

The butterfly is ready, for everything about everything, it took us a little time and material, which, for sure, will be found at home on the farm and with mom.

Similarly to the previous butterfly, we make another one, only this time it is plain and without pebbles.

We got two plastic butterflies, painted in the same tone.

If you stick a magnet to them, they will serve as a good decoration on the refrigerator or any other metal surface.

Option 2

Let's look at another implementation. We will paint it not with nail polish, but with stained glass paints. In the first version, we drew a butterfly on plastic, cut it out, and only then proceeded to coloring. Here the technology is different. We will draw an insect on the bottle, and we will paint it on it.

Let's prepare everything that is useful in the work:

• stencil drawing paper:
• plastic containers;
• stained glass paints;
• wire or thick fishing line;
• scissors;
• beads (several pieces of small size);
• awl.

Step-by-step instructions for execution:

We transfer the butterfly from the stencil to the paper.

Redraw the insect on plastic. You can do it like this. We cut the bottle, adjust the drawing from the inside so that we can clearly see it from above. With a gel pen we transfer the contours to the plastic.

When we finish drawing, we can start coloring. Recall that we paint without cutting out the insect, the paint falls on the bottle, along the contours. After painting, leave the workpiece to dry. After it dries well, cut it out. Give the desired shape with your fingers.

We form the body. To do this, take the wire or fishing line that we have prepared, string a few beads on it. You can take the same color, or you can make it multi-colored, it's as your heart desires.

A butterfly, or not one, if you have made several of them, are ready. They can decorate indoor flowerpots, hook onto curtains by attaching a pin from below, it is better to glue.

If the insect is made by a child's hand, then it will be a pleasant surprise and a gift for March 8 for mom, teacher or grandmother.

Stencils for making butterflies

hedgehogs

Waste material has a lot of opportunities and ways to extend its life. Moreover, in every family there is at least something. Here you don’t need to buy or invent anything special, much less spend money on them. Let's try to make a hedgehog from the same waste material as used plastic containers.

For work we will need:

• plastic bottle;
• pine cones, about a dozen, as long as they are the same size;
• two white caps, from the same bottles;
• glue (you can use "Moment" or, if there is mounting foam);
• colored plasticine.

Hedgehog creation technique:

First, we bring the container into the proper form: wash it, clean it from the label, wipe it and dry it.

On the prepared container, glue the cone directly on top with glue or foam (you can also use a glue gun if there is such an item on the farm). We start from the center, this will be the back of the hedgehog. We glue each cone as a separate element, after making sure that the previous one is firmly held.

If at least one of them falls, and the neighboring ones hold on tightly, then it will be difficult to “put” it in place. Take this into account and don't rush.

When all the cones - the needles of our hedgehog, are planted in their places, we will begin to form the muzzle. To do this, glue the bottle cap with black plasticine.

For the eyes, you will need white covers prepared by us. On them, in the center, we glue circles from the same black plasticine - these will be the pupils of the hedgehog.

Glue the eyes to the muzzle of the animal.

Now let's embellish our craft a little. What is a real hedgehog without stocks. We will make mushrooms, leaves, fruits with berries from plasticine. Then carefully lay it on his back.

You can create a baby for the company of an adult hedgehog by molding him with their plasticine. And since its dimensions will not make it possible to experiment with pine cones, the needles on the body can be made from sunflower seeds.

Helicopter

An interesting craft that you can do with your son for kindergarten. In this way, you will teach him to use various waste materials as a material for creating toys and other necessary things.

Prepare for work:

• a small plastic bottle, you can use baby yogurt;
• one tailor's pin;
• 3 tubes for juice;
• scissors;
• one ping pong ball
• stapler.

Step by step work:

First, make a hole in the lid so that the tube can freely enter there.

Cut the bottle so that the upper (with a thickening) part remains intact.

Take the remaining 2 tubes, cut them to the length of the intended propeller blades.

Cross them and pin them in the middle with a pin. Insert the tail of the helicopter into the cork of the bottle. Make skids from the two remaining parts of the tubes, connect with a strip cut from the unnecessary part of the bottle with a stapler.

Attach the main part of the helicopter with skids with a stapler too. Insert a ping pong ball into the hole.

The helicopter is ready. A minimum of time was spent on it, and the child will have a lot of pleasure from a toy created by his own hands.

Matryoshka

Matryoshka is probably the only toy that more than one generation has grown up with. In addition, it is considered a symbol of Russia. Many foreign tourists, coming to our state, buy them as souvenirs. Is it possible to create such a complex figure with your own hands, and even from waste plastic? Yes, you can, let it not be as functional as modern ones in toy stores, but it will be personal and, for sure, the most beloved.

In creating such crafts, not only plastic food containers are suitable, we will consider this a little later. The toys that you see in the photo below are made only from the tops of the flasks. So they will be more stable. So that the edges are not too sharp, they can be processed with electrical tape.

In this photo, the top part is inserted into the bottom, the middle one is generally removed. This nesting doll has a more respectable appearance, looks more natural and believable. Painted with acrylic paints. Children will not succeed in doing the same, but there are many stickers and patterns of a similar image on the Internet. As a last resort, they have a lot of options to learn and draw nesting dolls on such a layout.

The following photo and the model itself can be attributed to multifunctional. Here is a nesting doll in its own design and a pencil case for storing pencils and pens. As you can see, it is not made from a food bottle, and their containers are from shampoo or cream.

Approximate drawings and schemes for creating nesting dolls from plastic containers in kindergartens and at home.

Bottle cut diagram