Beautiful arrangement of paths in an elongated garden pattern. Where to lay paths in the country house and in the garden - photo

The design of paths in a dacha can greatly influence the design of the site. Therefore, it is so important to pay attention to creating beautiful paths.

Moreover, you can make an interesting path from various materials, for example, a brick path will look elegant, but mysterious country house design a path made of round timber will give natural wood, the path made of river pebbles looks stylish and will emphasize original design and a path made of plastic corks will make it brighter.

In addition, there are ready-made removable panels that can be laid out each year to your liking.

Country path project

Before you start laying a path, you need to create a plan for the area, in which you identify all the buildings, garden plantings, flower beds and schematically mark the path. The drawing must also include auxiliary objects, such as an irrigation system.

When creating a plan, you need to take into account all the nuances, so you should be as comfortable as possible when getting to any place in the garden. In addition, you need to take into account the fact that you need to walk around your territory at any time. weather, and at any time of the year.

Now the completed project must be applied directly to the site.

It will be easier to determine the width of the path and its direction if you apply markings directly on the site, which is especially important for a path made of paving slabs or brick.

It is best to make markings with pegs, which you must first drive in and then pull the rope along them. Also, for convenience, the side border of the path can be marked by sprinkling it with lime.

It is important to consider that removing the top layer of soil to lay the path should be wider than the path, because for reliability and durability it will require curbs made of durable materials such as concrete or stone.

Preparatory work

In order for your garden path to serve you faithfully for many years, you will need thorough preparation.

So, you need to take into account that the path should have a slight slope, and in the area of ​​the slope you need to make a drainage trench. This is necessary in order to rainwater flowed off the path, and excess moisture would not have damaged the coating.

The thickness of the removed soil should be 15 ÷ 200 mm. After this, in order for the edges to remain even, it is necessary to install boards along the entire perimeter of the dug hole from the sides.

Then a “pillow” is made; gravel is poured into the hole along with cement and everything is compacted and moistened. The “pillow” should have a thickness of 50-100 mm.

Types of garden paths

There are a lot of materials that can be used to make an excellent country path.

Brick path. This path is reliable, durable and looks very elegant in appearance.

Wooden path. This path looks beautiful and even mysterious; the round timber laid out in the form of an ornate path resembles a fairy tale path.

Stone path. Those who want to see a stylish and elegant garden path on their property can try a mosaic version made from river pebbles.

Cement path. This path is durable and reliable. To make it attractive, you can use special shaped molds, thereby getting the effect of a paved path.

Garden path made of plastic covers. Quite unusual, but at the same time bright option paths in the form of a mosaic of multi-colored caps from plastic bottles.

The presence of a large number of colors and the availability of material allow you to create a path with a variety of patterns that will make the landscape of your site a real work of art.

Plastic prefabricated path. This type of track can be quickly and easily installed and, if necessary, changed and even removed.

Thanks to the textured surface plastic panels It is convenient to walk along the path, because it does not slip, even if it gets wet. A large assortment plastic products will allow you to choose a garden path of any color and shape.

In addition, using slabs you can make a path of any shape and width. Plastic construction allows you to organize a path in any part of the site.

Another advantage of such a path is that, thanks to its structure, moisture will not accumulate on it, water will flow out through special holes.

Garden parquet path. This material is expensive, but its advantages outweigh the desire to save money.

Thus, “garden parquet” can be easily assembled and disassembled; wood treated with a special solution is not susceptible to moisture, fading, or temperature changes, has strength and durability, and besides, such a path will look luxurious.

Photo of garden paths on the site

Landscaping a personal plot is not as difficult as it seems at first glance. The least expensive idea would be to lay garden paths. This design will not only give an attractive appearance local area, but will also become a very functional addition. In rainy weather, you won’t have to walk on soggy ground; having a garden path will eliminate such inconveniences. The modern market offers a variety of materials for arranging a personal plot. You just need to make a choice based on taste preferences and financial capabilities. To save significantly cash it is not necessary to turn to landscape designers for help, there is no need to look for a team of tilers. It is quite possible to lay garden paths yourself; you just need to know a few subtleties that you may encounter in the process of arranging your local area.

Garden paths you can lay it yourself

Garden paths are the most budget option beautification of the site

Garden paths can harmoniously decorate a site

Paths designed using natural stone, always look impressive and original. Main advantages natural material is ease of installation, heat resistance and long term operation. The disadvantage is the high price of the coating, massiveness and the need to draw up a sketch before starting work. Natural stone is considered an elite material, and many developers prefer to practically not use it due to high price. But in this case, the price fully justifies the quality. Stone garden paths will last for decades.

Natural stone is mined in quarries and then processed. This means that the material is environmentally friendly and comes in a variety of colors and sizes. Among the methods of paving paths, there are two main methods: by applying a coating to a sand cushion or by spreading the coating directly onto the concrete mixture.

These tracks can last a very long time.

Paths made of natural stone look very beautiful

Laying on a sand bed

• It is necessary to dig a trench, the depth of which is determined by the characteristics of the soil. If the soil is light enough, the trench should be no more than half a meter, otherwise no more than 30 cm.
• A layer of prepared crushed stone is distributed on the ground, no more than 12 cm.
• A sand cushion must be laid on top of the crushed stone.
• An ornament made of natural stone is formed on the sand.
• If necessary, the seams are sealed with sand.
• At the last stage, the entire surface is treated with water. You need to monitor the amount of moisture, this will help avoid sand being washed out of the joints.
• Laying using concrete
• As in the first case, a trench is dug and several layers of crushed stone and sand are laid.
• The required amount of concrete is poured into the formwork.
• You should wait until the solution dries and carefully remove the formwork.
• Sand is poured and natural stone is laid on its surface.
• The joints are rubbed with sand, after which the garden path is treated with water.

You can also lay tiles on a concrete base.

When treating with water, make sure that the sand is not washed away

The surface on which the tiles will be laid must be leveled

Clinker brick paving

Limitless fantasy, set necessary equipment and a little patience - that's what you need when working with clinker. Material happens different forms, but the most common are rectangular and wedge-shaped. Clinker bricks began to be used two centuries ago and were used for paving roads and sidewalks. Later it began to be used to decorate gardens and summer cottages.

The hallmark of the material is not only its aesthetically attractive appearance, but also a number of functional advantages. Clinker bricks are made from clay using the full sintering method. This means that such paving will last long years due to its non-susceptibility to extreme low temperatures and moisture. It does not crack, can withstand heavy weight, can be cleaned with a brush, detergent and water. In addition, the material does not deteriorate from exposure to salts, alkaline agents and other abrasive substances.

The material is very resistant and is not subject to bad influences

A path made from such material can serve you for many years.

How to work with clinker bricks

If you decide to decorate your garden in a country style, the material will fit perfectly into the overall picture. Must be given close attention paving method. A garden path with smooth curves will look impressive. At the same time, pay attention that the path does not consist of sharp turns, this will prevent material from being trampled along inner corner. The process of working with coating is not complicated, but it has several nuances:

• the site is marked to determine the zero line, the slope is made in the direction of convenient removal of excess moisture;
• Pegs are placed in the corners of the site and a rope is stretched along them;
• a second rope is fixed to one of the pegs and retracted 90 degrees;
• boards are dug into the ground, a little away from the pegs, if necessary, an additional layer of soil is poured and compacted;
• a solution consisting of cement and sand is prepared;
• clinker brick is laid using a rubber hammer;
• If necessary, fill the seams with additional mortar.

Consider the presence of a border. The border will look great from an aesthetic point of view and will help maintain the contours of the path, blocking the path of flowing moisture. It can be formed using bricks, carefully placing the material on the edges of the path or burying it in pre-dug small trenches.

Smooth curves will further decorate the overall picture.

The border will further decorate the path

This material fits perfectly into country style

Paving slabs

Paving slabs will last for many years, as long as they are laid correctly. Choosing a tile is not difficult at all, construction market There are many types of coating available, from color to size and pattern applied to the surface. You can easily install the material yourself, without the help of professionals. To save money, it makes sense to use the cheapest and simple techniques laying paving slabs. To work, you will need tools that every owner will probably have: a bayonet and shovel, a peg, a level, a rubber hammer, a rake, a device for leveling the soil, a brush with hard bristles.

To lay the tiles yourself, you will need standard set tools

For tiles to last for a long time, they need to be laid correctly.

How to lay paving slabs

Before starting work, it is necessary to remove everything unnecessary from the territory and remove excess grass. Then go to the site markings and think about the width of the paths and their directions. It is irrational to make wide garden paths. This is quite expensive and takes up a lot of space, which can be used for other needs.

To mark the boundary of the future surface, pegs are placed and a rope is pulled over them. This is done to give flat surface path. Depressions are dug in the ground. To determine the depth of the trench, you need to measure the thickness of the tiles. For example, if the material is 7 cm thick, then it is advisable to make a hole 10 cm in size in the ground. Next, according to the boundaries of the rope, the side is knocked out using a shovel. The tool must be held strictly vertically. After work on the sides is completed, you can begin to remove excess layers of soil inside. The next step will be to distribute the sand inside the resulting space, while ensuring the uniformity of the surface. You can correct flaws using a shovel. Now you can begin the most important task: laying paving slabs. It is necessary to check the quality of work using a level. The slope per 1 m of the path should be 1 cm. The resulting seams are rubbed with sand, treating the tiles with water.

Before installation, the area must be cleared of debris.

When laying tiles, you need to check the surface with a level.

Use of wood

The purpose of any garden path is purely utilitarian, but what if you show a little imagination and approach creatively the issue of arranging the territory. Wood - environmentally friendly pure material with an aesthetically attractive appearance. Wooden paths will decorate any area and will look non-trivial and interesting. The material can be timber, boards, garden parquet or boards. But increasingly, cut wood is used to decorate a personal plot.

Before starting work, you need to make a choice between numerous types of wood. It all depends on how long you plan to use the track. Oak will last about ten years, pine will not lose its properties for 7 years. Larch can be considered the most durable species; it is the most durable and will last about 25 years. The more load will be placed on the path, the larger the wood blanks should be in diameter. It is advisable to make them at least 15 cm in height. With such dimensions, the wood cut is firmly fixed in pre-prepared holes and will not fall out during operation.

IMPORTANT! It is necessary to discard saw cuts that have cracks. Before laying, it is recommended to clear the tree of bark, this will extend its service life.

The marking of the site is carried out as in the cases described above. For comfortable movement of one person, 60 cm of the path width will be quite enough. The bottom of the trench is laid waterproofing film. If you don’t have it at hand, you can stop at the usual one. plastic film. The next step is distribution required quantity crushed stone on the prepared surface. Crushed stone acts as drainage and protects the wood from unwanted moisture. The sand is distributed in an even layer, after which you can begin laying the cut. The distance should be minimal. The gaps between the workpieces are filled with sand, and the material is watered to compact it a small amount water. You can decorate the path different ways. For example, paint the cut, sow the gaps with grass or decorate with pebbles. Remember, wood is susceptible negative influence environment, so before laying it is better to cover it special compounds preventing it from rotting.

You can make a wooden path yourself

Wooden paths will decorate any area and will look non-trivial and interesting

Concrete path in the garden

Each method of laying a garden path has pros and cons. concrete path- not an exception. Thousands of owners of individual housing choose this method of decorating their local area. Concrete – durable material, can last for decades at correct operation. The design is quite easy to create without the help of professionals. And besides, the concrete path - great way save money, the material is relatively inexpensive. Concrete can withstand significant mechanical loads without any problems, and installation does not take much time. But, like everywhere else, it also has its downsides. During the off-season, the material often cracks. This is due to ground movement in rainy weather. It is unlikely that it will be possible to change the location of the path in the future; the structure is capital. Therefore, it is better to take your time and think carefully about the directions of the paths and their width.

The process of laying a concrete path with your own hands must begin with the installation of formwork. It is better to use boards for this. If you plan to add some bends to the structure, use any plastic materials. Plywood is a great option. Please note that concrete must be poured in parts in any case. This is done to compensate for expansion or contraction of the material due to temperature changes. Therefore, there is no point in making continuous formwork for the entire area. You can lay it partially, thus significantly saving materials for the structure. Professionals recommend forming the pillow from a mixture of compacted crushed stone and sand. It makes sense to think about waterproofing. Geotextiles or roofing felt will serve for these purposes. The next stage is pouring concrete. The solution is mixed from cement and sand in a ratio of 1 to 3. The preferred concrete thickness should be at least 5 cm. The resulting layer is leveled using a spatula. After moisture appears on the surface, all surface irregularities can be removed and the concrete is wetted with water.

A concrete path is the cheapest and easiest option.

You can create such a track without the help of professionals.

Concrete is a very durable material and can last for decades

Plastic modules

The use of plastic modules in laying garden paths is a new technology that has managed to win thousands of fans all over the world. Plastic is a material that is quite light, cheap, durable and strong. The advantage is that the plastic modules can be dismantled at any time. They are not exposed to negative environmental influences and do not enter into chemical reactions. It is in this case that you can choose any option, because there is a huge amount of plastic on the market various forms and colors. The tile includes a backing and an outer part. The substrate is designed for air ventilation and drainage of excess moisture. Before installation, it is necessary to level the surface on which you plan to lay the material. It is better to lay additional drainage on the soil. Crushed stone can be used as drainage. The installation itself is quite simple and is carried out using lock fastening. This is how the parts of the tiles are connected to each other.

Plastic modules are not very expensive and easy to install

The lawn grate does not require special preparatory work

Using the form

Today you can make paths with your own hands without special effort. There are dozens of technologies in the world that make life easier for private home owners. One of the fastest technologies can rightfully be considered the use of special plastic molds. Everything is quite simple: cement is poured into the mold and left until it dries completely. For comfortable work, you need to acquire several samples; 2 or 3 forms will be quite enough.

Before laying the tiles, it is necessary to excavate the soil. The first layer is filled with sand to a depth of about 10-15 cm, then crushed stone (7-10 cm) is distributed; the preparatory work must be completed by distributing another layer of sand. After this, the sand is compacted and you can begin laying the tiles made using molds. It is recommended to fill the resulting cracks with sand, and then moisten the entire structure with a small amount of water.

Video: DIY garden path

50 photos of ideas for creating garden paths with your own hands:

A well-planned network of footpaths on garden plot- an important part of the work to create a beautiful and comfortable garden. We walk along them, enjoying the beauty of the garden, we push a wheelbarrow along them or walk with a bucket and shovel at the ready. Paths are main, walking and secondary, working. Depending on the purpose, we will build them from different materials. The dimensions of the garden dictate their width: the main route paths are from 0.8 to 1.5 m, auxiliary paths are from 0.4 to 0.8 m, the optimal width is 0.6 m.

The design of the paths can be built on geometric or free landscape lines; a reasonable game of contrast between the forms of strict geometry and smooth lines is also acceptable, for example, a combination of straight and picturesque lines, diagonals, circles, etc.

Paths and paths divide the area into different zones and at the same time unite the garden into a single space. This is achieved not only by the general design of the paths, but also by the use of carefully selected paving materials. There are several rules for the selection and use of decorative materials that are applicable not only to creating a network of paths in the garden, but also to any other work on the design of our environment.

Rule 1. The paving of paths adjacent to the house must involve the material used in finishing the house itself, be it the facade, basement or porch. That is, the same material should move from the vertical plane of the house wall to the plane of the garden and spread throughout it, which significantly enhances the feeling of the common space of the entire estate. This material should not dominate the paving of the local area, otherwise the house and garden will visually merge. It usually takes up about a third of the paving area.

Let's look at a fairly common option. The house is built of red brick, has white window frames, concrete blind area and a porch. It would be appropriate to decorate the front area with sidewalk paving concrete tiles, combining it with a clinker brick pattern. The light gray color of concrete mutes the brightness of red brick, makes it calmer and more pleasant to perceive, and harmonizes with white color window sashes, which, in fact, also work to smooth out the color of the walls. In this case, we choose clinker brick because its strength is close to natural stone, while ordinary brick in paving is fragile and begins to crumble quite quickly, especially if it is laid flat and not placed on its edge. But there can be a great variety of combinations and patterns of clinker and concrete tiles, just try to choose clinker and concrete tiles of more or less the same size. In this case, paving made from mixed materials will be stronger.

Rule2. The farther from the house, the less home decoration elements are used in the path design. Let's say the path near or around the house will be laid out from concrete paving slabs with the inclusion of clinker or finishing the side line from it. Then we will move to paving with only concrete slabs, perhaps of a different size or shade with occasional clinker inlays, and then, as we move into the forest area, we will finally remove clinker from the paving, reduce the proportion of concrete slabs and introduce gravel backfill. In some areas of the path distant from the house, you can make a gravel backfill with the inclusion of separate concrete slabs of a different tone. As you move deeper into the forest, concrete may completely disappear from the road surface.

However, the materials with which we lay out the paths near the house will appear again when, on a forest path, we come across a bench on a small rest area or a fountain with cool water. We can pave such an area with concrete paving slabs with a clinker pattern, reminiscent of paving a local area, but simpler. Or we can simply make a gravel backfill over the entire site and edge it with one or two rows of clinker. The opposite solution is also possible here: if brick walls houses and fences remain in the distance, then brick can be used as the basis for the paving, and concrete tiles or gravel backfill can be introduced only as a small memory of the path traveled.

Thus, combining carefully selected paving materials is an effective technique that unifies the entire composition of the garden. Moreover, in each zone of the garden, the paving must correspond to the purpose and style of the zone itself, be it a forest gazebo or a utility area.

Secondary or utility paths in the garden can be made of concrete paving slabs measuring 30x30 cm, laid in two rows, or two types of tiles, for example, in the first row of the path two tiles measuring 25x25 cm are laid, and in the second row only one tile measuring 25x50 cm, and these rows alternate. If you need to reduce the width of the secondary path, then 25x25 cm tiles in the first row are laid out side by side, as in the previous version, and in the next row the same tiles are placed, but in the middle, etc., that is, the tiles are laid according to the principle brickwork, when one upper brick lies on two lower ones. The last two options for laying tiles do not have cross-shaped seams.

It’s worth taking a closer look at this method of paving. Most sites in the Moscow region are located on watered medium and heavy loams. The soil is constantly saturated with water, which does not leave. When frost sets in, the water in the soil freezes and, as you know, expands. The soil expands accordingly. Such soils are called heaving soils; they cause a lot of trouble for builders, landscape designers, and site owners. It is clear that such soils can lift tiles laid in a path, and it is the tiles that have cross-shaped joints that are most easily lifted, and paths with other types of joints are deformed to a lesser extent.

There are a sufficient number of developed types of tile layouts rectangular shape. The most decorative is the so-called Roman masonry, in which tiles of several sizes are used, they are laid out in a free pattern, but without cross-shaped seams. IN Western Europe This type of masonry is extremely popular and is made from rectangular and square stone slabs.

Secondary paths can be laid using the step-by-step path technique, when the slabs are laid with breaks corresponding to the length of the step. The gaps between the slabs are filled with turf or loose decorative materials. It is convenient to walk on such a path, you can transport a wheelbarrow along it, without harming the lawn.

Rule 3. In the design of paths and areas in the garden, you can use no more than three different but compatible materials and no more than two or three of their shades. At the same time, the methods of arranging these materials can be very diverse. Indeed, the monotony and uniformity of paving must be broken by interspersing tiles that are different in tone and texture, or by introducing green islands of unpretentious ground cover plants that are resistant to trampling, which look great on the paving.

From these rules it becomes clear that materials for decorative and functional design sites cannot be chosen randomly.

Another standard option, requiring the selection of completely different materials - wooden house, and it could be old country house, and a house on the garden plot, and modern cottage from glued or rounded timber. In this case, one of the materials for decorating the site will be wood. These are all kinds of decking, walkways, boards of various sizes, garden parquet, step-by-step paths from saw cuts of various sections and diameters, tinted timber and simply old railway sleepers, sunk into the lawn or gravel backfill and, finally, decorative backfills made of tree bark and wood chips.

Wood as a material for creating paths is still rarely used in our garden design. Usually preference is given to natural stone. However, wood is the main building material; it is not such a clear leader garden landscaping. Exit rocks There is no Moscow region in nature, so the excessive use of stone in decorating gardens is not entirely natural.

Tinted wood is beautiful, durable, environmentally friendly, pleasant to the touch, quickly absorbs solar heat, dampens the sounds of footsteps and makes the pedestrian look at his feet and admire the simplicity and naturalness of the material, familiar to us from childhood. We all remember the silver-gray picket fence of our grandmother's fence from bad weather, but it will only shake up a long time ago forgotten memories about low similar dachas with carved platbands, painted shutters and an octagonal attic window in old dacha settlements left over from a bygone era... And in other countries, progressive designers artificially age, bleach wood, giving it exactly that unique silver-gray shade, using complex tinting compositions, or specially display to the gardens garden furniture without any protective coatings and wait several years for it to acquire exactly that shade...

Long-term use of wooden decks and walkways in the open air is possible subject to a number of rules. Firstly, you can purchase products from Western companies that produce wood materials with a ribbed non-slip surface, from which they make decks, patios, walkways and square panels placed in step by step. They are extremely durable, since in the factory, antiseptics are driven into this wood under high pressure. However, such wood is very expensive. Among the available species we can name larch. It is durable, but not cheap. Oak is not suitable for such purposes for everyone, since it is also expensive and does not last longer than pine. Most consumers buy pine. At correct processing wood and preventive maintenance, such floorings can withstand 8-10 years without major repairs. For decking, boards with a thickness of 15-30 mm and a width of 200-250 mm are usually used. The entire surface of the wood is treated with an antiseptic, and those parts that will come into contact with the ground are coated with bitumen. Wood flooring and walkways must be maintained with constant ventilation, i.e. lift it off the ground, placing it on its feet. The legs are timber with a cross section of 40x80 mm. Of course, the legs are treated with bitumen. Usually wooden walkways- these are two boards connected by transverse slats and placed on legs. A gap of 20-25 mm is left between the boards, which promotes additional ventilation. The surface of the boards must be well treated; the parts of the walkways are connected using galvanized bolts with recessed heads. You can walk on this flooring barefoot without fear of getting hurt. It dries quickly and heats up under the sun, giving pleasant warmth to your feet. Garden elements made of wood require annual treatment with antiseptic agents; if possible, it is advisable to put them indoors for the winter. Such walkways are placed on a gravel backfill. They are often thrown over a dry stream, leading from one wooden flooring to another, they are widely used in natural or natural gardens. Wooden boards and walkways often lead to ponds and even extend out onto the surface of the pond on supports.

The same rules apply to the construction of a path from wood ends. Typically, the beams are cut 15-20 cm long, impregnated with an antiseptic, the part that will be in the ground is treated with bitumen and installed in a road bed on a layer of compacted sand. The gaps between the segments are filled with sand and compacted. Smaller diameter pieces can be driven into large gaps by first sharpening the lower end. You can decorate the gaps tree bark or wood chips.

When working with wood scraps, you can use the following technique: in a predetermined place, not short scraps are buried, but elements 0.5 m long - such protruding processed logs can serve as seats or a support for a bench on a forest walking route. If you bury a group of logs 1.0-1.5 m high, you can get decorative wall or garden sculpture, organically inscribed in the plane of the track and, as it were, “growing” out of it.

Despite the fact that decorative wood materials are quite diverse, use only them when decorating an area with wooden buildings not entirely correct, especially if the area is large enough. Wood materials goes well with natural stone, with gravel backfills in warm colors, with artificial tinted concrete and porcelain tiles.

Nina Tomilina,
landscape architect
(Based on materials from the magazine “Flower Bulletin”, No. 3, 2005)

Paths in the country are transport arteries of the site that connect the house with other objects. They will keep your shoes clean in any weather and give the garden a well-groomed appearance. From a design point of view, they allow you to decorate your dacha space no worse than ornamental plants.

Garden path options

You can make paths in your country house with your own hands from various materials, for example, wood, tiles. concrete, natural stone, plastic, etc. They all have different period service, ease of use, aesthetic properties and of course cost. Therefore, the basis of choice is the search for a compromise between functionality, design and costs of acquisition and installation.

The most common and most popular option for paving paths in summer cottages is paving slabs.

Fig.1.

It is popular due to the variety of shapes and colors, as well as the ease of paving.

Fig.2.

Fig.3.

Concrete paths have become widespread. They are easy to create and good to use.

Fig.4.

Of course they have a simple appearance. However, they are an excellent base for any other coating. Concrete paths are somewhat similar to the foundation for a building.

Of course, materials of natural origin such as sandstone or pebbles will never go out of fashion. Their cost is quite high, but they allow you to create a unique site design.

Fig.5.

Fig.6.

More economical option imitating natural stone is a technology for creating paths by casting cement mortar into a mold.

Fig.7.

In addition to saving on building materials, this technology allows you to build a path and cast tiles at the same time, which greatly reduces time and simplifies the work.

No less interesting are the paths from natural wood. They can be made from log cuts or in the form of walkways.

Fig.8.

Fig.9.

The disadvantage of such paths is that they are not high durability, due to the susceptibility of wood to rot.

An alternative can be modern polymer slabs, which are used for organizing eco-parking.

Fig. 10.

A stronger and more durable type is concrete mesh.

Fig. 11.

This solution allows, on the one hand, to get a full-fledged path, and on the other, not to disturb the aesthetics of the lawn. This way you can make a place to park your car.

Choosing the optimal width

An important step in creating country path is a choice optimal width. If it is not of sufficient size, it will be inconvenient to move. If it is too wide, then there is likely to be an inappropriate waste of material, and, consequently, financial resources and labor costs for its construction.

The optimal width should be determined based on the characteristics of its operation. So the central paths should be made larger so that two people can diverge freely, and between the beds there should be less.

• The central ones should be 70-90 cm wide. This is enough for two adults to pass each other or walk along the path side by side.
• Branches to greenhouses or beds should be made 50-70 cm wide. Such paths are enough to comfortably roll a wheelbarrow with fertilizer.
• For passages along the beds, 30-50 cm will be enough. This size will ensure ease of caring for plants and will not take up much space.

It should be noted that if the path is made of paving stones, then its width must be tied to the size of the tile, i.e. must fit into an integer. Otherwise the design will suffer.

Do-it-yourself paving of paths

Laying paving slabs

Laying paving slabs begins with marking the path and installing the curb. According to the markings made, delete excess soil. Grooves are made under the curb and filled with sand.

Apply on top of the sand cement mortar, and a curb is installed on it. At the same time, it is aligned according to pre-made markings. Usually a stretched cord is used for these purposes.

After the curbs are installed, agrofibre is laid on the ground. It will not allow the sand cushion to go into the ground, and at the same time provide drainage.

Fig. 12.

Concrete path technology

Concrete pavement, unlike paving slabs, is easier to manufacture. Its great advantage is the availability and ease of delivery of building materials to the site.

The device begins with marking and removing the fertile layer of soil. In total, it is necessary to remove 15–20 cm of soil.

Fig. 13.

After that, agrofibre is laid on the ground, covered with sand and thoroughly compacted. For achievement good result it can be spilled with water several times. This procedure will compact the pillow well.

Fig. 14.

Polyethylene is placed on top of the sand cushion to prevent leakage of the solution. And they pour cement mixture, periodically leveling it.

Fig. 15.

Cement mortar is made from 1 part cement, 3-4 parts sand and 0.5-1 part water. You can add crushed stone to it, this will make the pouring more durable and reduce the consumption of the cement component.

Upon completion of the device, the filling must be covered with polyethylene. After 2 days you can walk on it.

We have reviewed possible options paths in the country. All of them will fit perfectly into the landscape of the site and will perfectly perform their main function. Of course, they differ in labor intensity and cost of construction. Coating made of concrete and paving slabs is the simplest and most durable. Therefore, most people choose this type, especially if they plan to do all the work with their own hands.

An elegant path emerging among snow-white pebbles

Today we bring to your attention amazing ideas for decorating garden paths. We will show you the splendor of options for arrangement and chic landscape design. Here are all the most popular examples, from unique design compositions and stylish geometry, to simple and uncomplicated paths built from waste building materials and other great ideas.

The most popular are the stunning alleys and paths built from natural stone. They themselves can perfectly complement textures and diversify lush greenery, but you can show a little creativity and create magnificent masterpieces with their own original plot, charming contours and rough shapes.

A fairytale path among a riot of decorative plantings

Rectangular rock fragments surrounded by colorful pebbles

Simple but neat path

Stone slabs laid between beautiful flower beds

Even simplicity can look impressive

From large fragments you can combine not only an alley, but also steps

Compositional contrasts

What your imagination is capable of

Beautiful staircase

Unique image

Cozy garden

Laconic landscape design

Fairytale composition

They will look more impressive in landscape design section of the work from decorative stone, which was previously supplied to the finishing to acquire a certain shape.

As a rule, such rock fragments are made to order and, depending on your desire, they can have even the most intricate configurations.

You also get the opportunity to individually select this or that stone and better implement this idea together with a designer who will help you correctly formulate your needs.

Elegant decoration

Intriguing compositions from different materials

winding path

Alley for modern garden with minimalist design

Original scenery

The road to a fairy tale

You can focus on non-standard options, winding stone paths will add an interesting twist to your site. And if you choose original garden lighting to complement such a stylish look, you will get an impeccable picture that will be difficult to take your eyes off. You can lay out such a path from almost any material that is available to you.

Charming road through a well-kept lawn

A winding concrete path surrounded by colorful flower beds

Discreet Design

To some, brick may not seem quite right relevant material, but if you formulate the image correctly and choose non-standard patterns, then you will get a wonderful decor. Moreover, you can combine it with other textures to create a striking contrast.

Intricate motive

Stylish alley

Convenient path through the luxurious gallery

Simple but effective solutions

Paving stones formed into a stylish image

A road along which your walk will be unforgettable

Interesting way of laying

Chic landscape design

For fans of stylish geometry and creative design you can think about a stunning option that is worthy of royal flower beds. Symphony of natural stone, lawn grass, pebbles or other material can be embodied in gorgeous picture, which will become an artful highlight of your garden.

Playful combination

Worthy decoration

Concrete garden paths also have good potential. You can build such an alley yourself, having basic knowledge in this industry, or entrust all the work to a specialist.

You can choose any method: solid pouring or slabs, and the second method will be more flexible, since you will get not just a solid canvas, but also areas where decorative plants can be planted between the fragments, which will serve as frames for each piece.

Alley between beautiful flower beds

An impressive composition in an original frame

Paved paths

Adding Interest with Captivating Details

Magnificent steps

Do you want to express your individuality, and in some cases, fit within a modest budget? Then the following examples will pleasantly surprise you.

Unusual, but beautiful path from wooden logs buried in the ground

A creative approach to arranging a path

Even simple pallets will perform the simplest task

A unique pattern, the material for which can be found among our garbage

Passage between flowerbeds

Having on your site small pond, you can’t even imagine how effectively you can present this image. Right in the middle of a mini-reservoir in the garden, you can build flower beds with moisture-loving plants and lay a small path out of stones. But you shouldn’t limit yourself to this, because wide opportunities open up before you that you shouldn’t brush aside.

Gorgeous man-made lake

Exotic terrace

Luxurious landscape design

The paths, lined with stones with an uneven structure, have a very charming appearance. They blend perfectly with the entire landscape. To slightly soften their rough appearance, you can plant decorative low-growing plants in the voids between them that will hide the open ground and will form a simply fabulous image.

A tempting option for designing a path

Modern terrace design

Wonderful path

Magic Road

Bring a variety of colors

Visual appeal in every detail

Magnificent landscape with superb scenery

You can build garden paths with your own hands even from scrap materials, you may doubt it, but glass, sand, broken bricks, old tires and other building materials can be a brilliant idea for decorating a stunning path running through your garden.

For a more elaborate project, you will need the help of a designer who will turn you patio or a plot near the house in a fabulous place where you can not only relax, but also fully enjoy the beauty of nature that you created with your own hands.

еQˠ - just add the additions suggested above, and you will mentally find yourself in the south of France.