Walls in the form of a brick wall with their own hands. How to make an imitation of brickwork on the wall at home

Brick-like decorative coating - a large selection from purchased materials to do-it-yourself creations. How to combine brick tiles and wallpaper, and how to properly glue the material on the corners. Photo selection of brick decor ideas.

Properly created room design solves problems such as:

• compensation for the lack of light;
• interesting stylistic choice.

To solve many problems, designers use non-standard materials in surface finishing, which are often used from the street side.

Brick wall decoration is a creative solution. It fits harmoniously in the bathroom, kitchen, bedroom. Sometimes this finish highlights the area where the plasma is located, and sometimes protects the surface from the influence of moisture and other factors.

Brick wall decoration: room style and design

Brick wall decoration is applicable almost everywhere: offices, cafes, cottages, private houses and apartments. And the size of the room does not matter, because the choice of material for such a finish is great - from painting to applying tiles.

The brick wall has many variations:

• pure white masonry in the kitchen, in the bathroom;
• red facing - finishing the partition in the hall to highlight it;
• old masonry (it's about to crumble) - a creative solution to the attic;
• the royal version - finishing corners, arches, the edge of the wall. Highlighting a significant place with backlight;
• imitation of brick with different shades for interior decoration of an apartment.

Materials needed for wall decoration:

1. Tiles - gypsum, clinker.
2. Wallpaper - the texture may be different.
3. Paint - use stencils.
4. Styrofoam.
5. Drywall.

These materials are light in weight, so when decorating the surface, it will not be burdened with finishing material.

Cladding inside the apartment

Facing the walls of the apartment is made of plastic panels (light weight material), tiles. This is laborious work, but at the end of the work there is no difference between real masonry and cladding. Correct work gives a guarantee of masonry. It can be washed and wiped. She doesn't scratch or flake.

Depending on the color, the lining is done in the kitchen. White color makes the room well-groomed, bright, conducive to cooking and tea drinking.

In the hall, partitions are sometimes highlighted with LED strips. Allocation of a niche for photos or under the TV.

In the bedroom, this could be the headboard. Here the choice falls on the "royal clinker material".

Decoration from the inside

Wallpaper, paint, decorative plaster are also used to decorate the room inside.

These materials create an imitation of masonry.

Depending on the chosen cladding material, the room may be slightly darkened or separated.

For example, in a large room, you can allocate an area for indoor flowers or a place for tea drinking.

Wallpapering under a brick in the corridor at the entrance will not last long due to constant impacts on the wall.

In the bedroom, one side is made under the masonry to create originality. Creating an unusual interior is always associated with non-standard solutions. So, in a surface made for a certain decor, you can simply insert dowel-nails and hang handmade crafts on them.

Options for imitation of decorative bricks in the interior: finishing materials

Brickwork in the interior of the apartment makes the room interesting, cool in the summer, and if the brickwork is decorated with wooden crafts, then in winter it will be a warming element of the interior. Wood brings warmth.

Imitation of decorative bricks can be made from different materials from paint to stone.

In the corridor lay out the entrance to the apartment with plaster tiles. Lacquering gives protection against abrasion, shock, and at the same time makes the interior unusual.

At the bottom of the walls, brickwork is made to protect the coating from pets. Everyone knows how cats love to scratch the wallpaper. With slabs, the walls will remain intact.

The bathroom is special - sudden changes in temperature, high humidity. Therefore, if there is a desire to highlight shelves with accessories, then a clinker model will do. It is not afraid of moisture, like gypsum or wallpaper, at the same time, the manufacturers of this tile made a wide choice in terms of colors and for various designs, loft styles, Scandinavian.

Wallpaper

Wallpaper for brickwork is produced in many versions. They have their differences:

• ease of gluing;
• suitable for any surface due to its weight;
• application to uneven, semi-circular surface.

Wallpapers are divided into types:

1. Vinyl - repeat the texture of the brick, all the bulges, roughness. They make the interior cozy, in addition, they protect the walls from external negative factors.
2. Paper - ordinary wallpaper with a printed masonry pattern. A budget option.
3. Non-woven - have the appearance of natural masonry. Ease of sticking.
4. 3D wallpaper - the highest quality, realistic coverage. Repeats masonry exactly. At first glance, there is no certainty that this is not a real brick surface.

Wallpaper should be glued based on their technical characteristics. Many of them do not withstand high humidity.

Brick-like plaster for interior stone finishing

Textured plaster is a full-fledged imitation of masonry, which has a number of features:

• ease of doing the work yourself. To create brickwork, there is no need to involve craftsmen;
• availability of acquisition of material - has a relatively low price;
• the created masonry from decorative plaster is painted in various colors and shades;
• due to the plaster layer, sound insulation and thermal insulation increase;
• decorative plaster is absolutely safe for health.

Disadvantages: dust collects in the grooves of the pattern.

Textured plaster is divided into types:

1. Cement mixture - has shrinkage. Use on balconies, attic, wet rooms.
2. Lime-sand - mainly goes to walls prone to fungus and dampness. Lime dries.
3. Clay mortars - well used on wooden surfaces.
4. Gypsum plaster - afraid of moisture. Its application is living room, hall, room.

Each type has its own installation specifics. Therefore, before use, it is necessary to study the technical characteristics.

Dye

An ordinary wall can be painted to look like brickwork. For this, 3 methods are used.

1. On a white wall, you need to draw each element with the help of brushes.
2. With tape. They are given the seams of brickwork and the main color is painted over the entire surface. After removing the adhesive tape, you will get a brick wall.
3. Apply foam. A brick is cut out of it. Foam rubber should be dipped in paint and stamped on the wall.

All methods are simple and do not require large expenditures. It is only necessary to properly dilute the paint to get a brick shade.

Gypsum brick tiles without coating

Gypsum elements without coating are used only in dry rooms. Dust can quickly settle on them, and they will lose their original color. Therefore, the purchased tile will either be self-made, it must be coated with paint or colorless varnish.

Plastic elements

Plastic bricks are made at home. This simple solution saves the household budget and at the same time creates an individual design of the room. The plastic elements of a brick wall are cut out of ordinary even plastic, glued to the PVA surface, then painted or left white, painting over only the joints. Fix them with screws and glue. All borders are overwritten with grout or drawn.

Separate bricks for relief integral masonry

If the surface in the house is not plastered and there is no putty, then this is a ready solution for the design of the apartment. It is worth cleaning it, carrying out a series of preparatory work and covering it with a colorless varnish.

How to make laying tiles under a brick inside the house with your own hands: how to decorate correctly

For the correct laying of plates, 2 methods are used:

1. With glue.
2. With the help of rails and screws.

The first method is no different from laying ordinary tiles. The second method is used with grooves. It is fixed to wooden slats with self-tapping screws. They are closed by the grooves of the next element.

At the end of the work, the joints are grouted with a mixture for these purposes and coated with a colorless varnish. In some cases, the decorated surface is covered with paint that creates a shade.

List of necessary equipment for masonry during repairs

To fix with a wet method, you need to collect tools and buy materials:

1. Meter, marker, build-level, ruler, glue, spatula with serrated spatula.
2. Saw for cutting tiles or tile cutter.
3. Roller, brush, primer.
4. Decorating brush.
5. Grout for seams, adhesive tape.

In the process, you may need a rag, a damp sponge. As well as a container for mixing the adhesive mixture.

Before work, it is necessary to prepare the surface.

How to put: where to start

Before laying decorative elements, work is done in stages:

1. We need to level the walls. To achieve the desired result, putty is used.
2. After the solution dries, the wall is covered with a primer.

1. On a dry surface make markings. To do this, use a pencil, ruler, level. Horizontal lines must be even, otherwise the masonry will turn out to be crooked.

When creating markup, do not forget about the joints. Its minimum size is 3-5 mm.

If you want to make an individual drawing using different colors or sizes, you must first lay out the elements on the floor (like a puzzle).

When the markup is done, the glue is diluted. There are instructions on the back of the package that you need to follow.

How to lay out one wall

Lay out the wall should be read according to the markup, from the second row from the corner to the center. With the first two rows laid out, everything must be left until the glue is completely dry. After laying out another 4-5 rows and again leave everything to dry. Thus, the entire surface will be laid out without displacement. The very first is laid out last row. If required, the elements are cut to maintain evenness with the floor covering, plinth.

How long do the first rows dry

After kneading the glue, laying starts from the second row from the floor. This is done from the corner to the center. After laying out the first 2 rows, the work is left to dry completely.

The first rows dry for about a day. It all depends on the composition of the adhesive, on the humidity in the room, temperature. On the packaging of the adhesive composition, the hours of drying of the solution are indicated. From 5 hours (Knauf) to 12 hours (Ceresit).

It is necessary to wait for complete drying, otherwise, with seamless masonry, the upper rows will put pressure on the lower rows, thereby causing an offset.

How to trim corners

In order to finish the corner of the room, it is necessary to measure the distance. If the tile is long, cut it. On the second wall of this corner, the tiles are measured to the edge of the laid out elements at the corner. Also cut and fixed.

There is already a formed corner for sale. It is made at 90 degrees. It remains only to glue it to the surface. This eliminates the possibility of cutting (dust) and taking measurements (may be inaccurate - error in millimeters).

How to stack with wallpaper combination

There are 2 methods to combine cladding with wallpapering:

1. First, according to the markup, they make a lining without the last pebble. Then they glue the wallpaper and lay the last tiles with an overlap.
2. Initially, they glue the wallpaper, then they make the lining.

The first method is:

• surface preparation;
• its markup;
• lining, without the last pebbles bordering on future wallpaper;
• sticking cut wallpaper according to the intended pattern;
• laying the last elements. They should lie on the wallpaper by 2 mm.

Second way:

• it is necessary to prepare the surface and cover it with a primer;
• further draw the borders of wallpaper and tiles. Make markings for decor;
• glue wallpaper;
• after that, the surface is lined with brick slabs.

Do not forget about the seams between the rows. If the adhesive gets on the front side of the tile or on the wallpaper, it must be immediately wiped off with a rag or sponge.

What to consider when interior decoration

While working, you need to take into account the nuances:

1. Do not forget about the gaps between decorative bricks.
2. Before you make a lining on the surface, you need to choose the right adhesive solution. If the wall is cemented, cement-based glue is chosen (it shrinks), if it is GKL - gypsum plaster.
3. If the surface is made of plasterboard, care must be taken that it can withstand the weight of the tile and glue. How well the metal crate is made.

It is not necessary to make floor-to-ceiling cladding with decorative elements if the GKL is glued to the surface. You can make fragments - around the door or below.

1. If glue gets on the front side of the tile, it must be removed immediately, otherwise the appearance of the decor will be damaged.
2. The bottom-first row is laid out last, fitting the tiles under the floor surface or the border of the plinth. Sometimes tiles need to be cut.

If you know all the nuances, the installation will go smoothly.

Do I need to open the surface of the decoration for artificial brick in the room with varnish

After the glue has dried, the surface must be varnished. This will protect against external destructive factors: moisture, temperature changes. As well as dust settling - the lacquered lining can be easily wiped with a damp microfiber to remove settled dust. Unvarnished decor will quickly be erased, darken from absorbed dust.

There are different types of varnish - matte, glossy, with color and semi-white.

How to decorate walls around imitation brick: options

The surface decoration around the decor is made according to the general interior. It could be wall painting. The color is chosen lighter than the brick, at the same time it should be in harmony with the general background.

Wallpaper is also selected light. Patterned wallpapers are not allowed. Mostly it is a monochromatic material.

Photo wallpapers are selected carefully so that the brick complements the overall picture, and does not stand out. Also pick up and 3D wallpaper.

Sometimes there is a combination of cladding and wood. But, this is approached with caution - natural wood should be present in the setting of the room.

Useful video

The cheapest way to texture finish is to imitate brickwork. It fits almost any interior style, and even an inexperienced master can handle such a texture. Therefore, now we will talk about how to create such an imitation.

Method one - wallpaper and paint

The simplest brick wall decoration is done using textured wallpaper and paint. To do this, you need to purchase wallpaper for painting (preferably from fiberglass - it gives the most interesting texture), paste over the area intended for finishing with them and take the following actions:

• We let the wall dry completely and go about our business for 2-3 days.
• We go to the store and buy thin masking tape.
• We stick strips of adhesive tape on the wallpaper, placing them parallel to the plinth with a step (distance between adjacent strips) of 6-7 centimeters. Wider is not necessary - your "brick" in this case will not look quite natural.
• We cut 7-8 centimeter strips of adhesive tape. You need a lot of them - to calculate the number of strips in one "row", you need to divide its length in centimeters by a factor of 12.5.
• We paste these strips on the wallpaper, perpendicular to the horizontal rows, placing them in 12.5 cm increments. Moreover, in the first row (from the floor or ceiling), the strip is glued at a distance of 12.5 cm from the corner. And in the second row - at a distance of 6.5 cm from the corner. So we can simulate the overlap of the vertical joint in real masonry with the top brick.
• The next step is tape. You buy water-based paint, mix brick color into it and apply it on the wall with a roller, painting over both adhesive tape and the "windows" obtained with it. After an hour, this operation will have to be repeated and the paint should be allowed to dry for 2-3 hours.

Next is the dismantling of strips of adhesive tape. They are carefully torn off, getting seams between the painted bricks. After that, you need to pick up a brush and carefully paint over this seam with another color (usually white or black). And if you accidentally paint over the edge of the brick, then you should not worry - this creates the effect of uneven edges. But streaks are categorically excluded here, so when painting the seam, the bottom row must be covered with thick cardboard.

Do-it-yourself visual imitation of a brick wall is done literally in a day. And even faster if friends or household members are involved in the process of cutting and sticking adhesive tape. Moreover, water-based paint does not smell at all. Therefore, this technology can be practiced even in the cold season, when the room cannot be ventilated.

A significant disadvantage of the technology is the lack of masonry depth. The color can be chosen with a successful shift of colors, the texture is given by the relief surface of the wallpaper, but the depth in this case cannot be obtained. Therefore, the falseness of visual imitation will be noticeable already from a meter distance. However, the simplicity and low price of such a finish cover this drawback almost completely. In addition, "bricks" can be removed from the wall along with wallpaper or painted over if it seems to you that this finishing option does not suit your home at all.

Gypsum and ceramics - presentable, but expensive

The most realistic brick look is created using gypsum or ceramic imitation of this building material. You prepare the wall, purchase finishing material of any color and texture, and prepare the adhesive. The process of pasting tiles under a brick does not differ from the technology of tiling. That is, you apply a solution to the back of the element with a notched trowel and press it against the wall. The horizontal in this case is checked by a level, the seams are indicated by inserts from trimming tiles, and every second row begins with a half of a decorative brick.

With this, an imitation of the chess structure of the masonry is achieved. In the final, the seams between the tiles are filled with cement or a special grout. Let's say right away - such an imitation of a brick wall with your own hands takes a very long time and is not always of high quality. An inexperienced master is transported for more than a day, even with a small area. However, if you know how to work with tiles, then this method of facing will not cause you any difficulties. In addition, decorative brick imitation for interior decoration is not cheap. But it can be done with your own hands, reducing the price of such a cladding by saving on materials.

To do this, you need to purchase or rent a silicone mold for casting such "bricks" and a bag of finishing plaster mixture. After that, you make a solution of medium density and pour it into the mold, pressing down with a spatula. After some time, the dried tiles are removed from the mold and glued to the surface. Self-made finishing material is no different from a store-bought counterpart, however, the speed of manual production is, as a rule, depressingly low - 10-15 tiles (and this is even at best) per day. Therefore, some home craftsmen cut out such drywall bricks, freeing it from the top paper layer after cutting.

The masonry imitated with the help of homemade bricks turns out to be surprisingly realistic. She has both texture and depth, and the color can be selected using. Factory bricks give the effect of a 100 percent real brick wall, which does not differ from real masonry either in color or in touch.

Method three - panel trim

If you don’t like masonry coloring, and you don’t build a tiled brick wall with your own hands at all due to a complete lack of experience in facing work or the incredible curvature of the surface, then panel finishing will be the best way out of this situation for you. In this case, you cut a brick out of styrofoam and glue it onto a drywall panel. After repeating these steps many times, you fix the plasterboard pasted over with imitation of bricks on the section of the wall being finished. Next, you need to fill the joints between the polymer tiles with plaster and paint the bricks in the desired color.

Wall decoration with decorative bricks on panels allows you to work with frame structures. That is, in fact, you may not have the wall itself - it is replaced by a drywall slab, which is very convenient if you are trying to finish a new interior partition or box in this way that covers engineering communications. In addition, this technology is useful during the finishing of curved walls. To make bricks from polystyrene, and even better - from extruded polystyrene foam (this is such a hard foam), you need to cut a standard slab into strips 6-7 centimeters wide, from which bricks 12.5 cm long are then cut.

The recommended plate thickness is 2 cm. If you do not plan to form a textured surface, then instead of a thick slab for wall insulation, you can take a thin tile for finishing the ceiling. Fixing the foam on drywall is done with glue or finishing plaster. You draw stripes on the surface of the base in increments of 7-8 centimeters and stick imitation bricks on them. In addition, they can be screwed to plaster with self-tapping screws 20-25 millimeters long, but in this case, try to use furniture hardware that does not rust.

Fastening drywall to the wall is carried out in a standard way - on self-tapping screws to a metal or wooden frame. The seams between the bricks are filled with ordinary mortar. For coloring, it is better to use thick water-based paint.

The main disadvantage of this option is the high flammability of the bricks. According to building codes, foam in the interior is supposed to be covered with a layer of centimeter plaster, even if this material was foamed using carbon dioxide, not air. Therefore, before making an imitation of a brick wall from polymer cubes, you need to calculate the possible risks of fire hazards. Do not use this lining near sockets, in the kitchen or in the children's room.

Stucco wall - cheap and effective

Decorative brick for interior decoration is not cheap, the foam version burns and poisons the air with harmful chemicals, the painted one does not look realistic. As a result, the picky homeowner is left with only one option - to mold an "almost brick wall" of plaster.

Moreover, the lack of experience in plastering surfaces in this case will be more of a plus than a minus, because we need not a smoothly worn wall, but a torn texture with multiple layers, cavities and other defects. And from the tools you only need wide and narrow spatulas and a screwdriver with a mixer nozzle. The very process of making a cladding in a brick format with your own hands is as follows. Clear the space under the wall. Lay old newspapers on the floor, covering a meter section. This will come in handy when you clean the floor from blots from the plaster solution.

Coat the wall section with a primer that will increase the adhesion of the surface. The very possibility of holding the plaster on the wall surface sometimes depends on whether priming was done or not. While the primer dries, you can prepare a solution for a decorative coating. To do this, take a bucket, pour 300 milliliters of water into it and pour in the dry mixture. Moreover, as a basis, it is better to choose not a finely dispersed finishing plaster, but a starting composition with a rough structure. After the mixture is poured into the water, beat the solution with a construction mixer, obtaining a plastic mass.

Next, you need to apply a 5 mm layer of plaster. To do this, take a small portion of the solution from the bucket with a narrow spatula and apply it to a wide tool; turn the wide spatula with mortar towards the wall and, laying it almost parallel to the surface, spread the plaster over the surface to be finished. Repeat this procedure until the entire area is covered with a layer of plaster. You will end up with a sloppy finished surface, which is very good. After all, we are not creating an evenly worn plane, but a texture that imitates the rough edges of a brick.

After application, the solution is allowed 30 minutes to partially dry. During this time, you must apply a masonry grid to the surface using a ruler and thread. And it’s done like this: you measure 7 centimeters from the ceiling on both sides of the wall, then your two assistants pull a thin but strong thread along these marks, and you, holding the middle of this segment, pull the thread and sharply release it, leaving it on the damp plaster well-marked furrow. After that, the procedure is repeated again. And so to the floor.

After 30-40 minutes, the plaster will dry out, but remain plastic, and you can cut horizontal grooves in its body using jointing - a masons tool that removes excess mortar from the masonry joints. It can be made from an old spoon by cutting a semicircular handle to a width of 8-10 millimeters. In addition, instead of stitching, you can use a centimeter-wide carpentry chisel. The process of selecting the groove itself is carried out as follows: press a plaster rule or a flat board against the stuffed line and draw a joint along it, pressing it into the wall. Once you've scratched through the soft finish and hit the hard surface, you can release the pressure. Just do not try to remove a layer of plaster in one pass by jointing - this way you can damage the entire texture by accidentally tearing out more mortar than necessary.

The next step is the formation of vertical seams. To do this, we need a foam brick 12.5 × 6 centimeters, which we will apply between the horizontal seams, outlining the vertical ones. At the same time, one should not forget that the vertical seam of the lower row must be blocked with a brick from the upper one. After the plaster has completely dried (after 1-2 days from the moment of application), you can clean the edges of the bricks with sandpaper, getting rounded edges, like on old masonry. Next, you have to paint the main surface and masonry seams.

As you can see, anyone who can read these instructions and hold a spatula and jointing in their hands can make an imitation of brickwork from ordinary plaster. Moreover, such a finish is carried out at the speed of coloring and gives the same reliable result as facing with decorative tiles. A wall made according to this scheme is not afraid of fire, looks very realistic and is easily removed after such a finish gets bored with the owners of the home. But before applying the decorative layer, the surface to be trimmed must be prepared.

How to prepare a wall for finishing with your own hands

If your goal is a realistic imitation of brickwork, then you cannot do without the wall preparation stage. After all, real masonry gives a flat surface (if it is built by a skilled bricklayer). And before applying the textured layer, it would be nice to trim the walls. Moreover, the lopsided plane is corrected with the help of hired specialists, and a relatively flat brick wall is done by hand. And for this you do not need to have the skills of a master plasterer - just buy a sheet of drywall and fix it to the surface using pre-drilled holes with sealing inserts and self-tapping screws.

Any decorative bricks can be glued onto the drywall surface - even an inexperienced finishing specialist will do this work. In addition, it is easy to apply plaster on it - primed drywall has very high adhesion. And perfectly even drywall will not let you make a mistake if the floor or ceiling is skewed - just put the sheet on a level and sculpt bricks on it, stepping back from the edge of the desired distance without additional checks of the horizontal and vertical of each row.

How to paint decorative bricks - different options

In conclusion of the material on the decorative wall decoration, we offer you some tips on the selection of coloring compositions. After all, unsuccessful painting will destroy the fruits of the painstaking work of even a professional finisher.

Therefore, at this stage, you should adhere to the following tips:

• Purchased brick does not need to be painted - its surface was covered with the right color at the factory. And you don’t need to repaint either - this way you will kill the planned presentability.
• A foam brick, cut from a standard sheet with your own hands, is well painted with a water-based acrylic emulsion. Solvents are basically excluded here.
• Any water-based paint is suitable for wallpaper, but the ideal option in this case is a thick composition that resembles sour cream in consistency.
• Before painting, the plaster must be primed and painted in at least two layers. In this case, at first the brush goes along the horizontal lines of the seam, and then along the vertical grooves.
• If the composition lacks density, then PVA glue can be added to the water-based paint.

With the advent of the loft style in the middle of the 20th century, brick walls became incredibly popular. But there is not always real masonry in the room, so it is often imitated using plastic panels, wallpaper, tiles, etc. In this article, we will look at how you can make an artificial brick wall using decorative plaster.

What does brickwork look like?

Decorative brick-like plaster is used for finishing walls, arches, doorways in apartments, cottages, office or administrative premises. You can also use this type of finish to highlight individual sections or parts of the wall. Less expensive cement-based compounds are used for cladding building facades. But the bricks made of light or red stone, squeezed out on decorative plaster, look the most successful.

Below are photos of an imitation of a brick wall made of plaster in the interior of the premises and the decoration of the facades.

But the most high-quality and durable are ready-made compounds based on polymers: silicate and silicone. They are plastic, easily distributed over the surface and have high adhesion (adhesion), strength and moisture resistance.

To save money, you can make your own decorative plaster from ordinary putty .

Wall preparation

Walls on which decorative brickwork will be applied require some preparation.

Curved walls need to be leveled plastering or, for example, sheets of drywall.

Clear jet trim. If the decor is planned on the old plaster layer, then it must be cleaned, a rough surface created, treated with an adhesive primer. Fragile areas are knocked off the wall, chipped and puttied. If the surface has been previously painted, the paint layer must also be removed, otherwise the plaster will not hold firmly. This is discussed in detail in our article: “Is it possible to plaster on paint: how to do it right?” Read .

Before plastering, the wall is primed. For interior decoration, a universal deep penetration acrylic composition is suitable. The primer will improve adhesion, bind small particles and dust on the wall.

DIY brickwork imitation

There are several ways to make "bricks" using decorative plaster. Let's describe each of them.

Making bricks with a stamp and roller

On sale you can find special silicone or polyurethane stamps for one or more bricks. They are carefully applied to a slightly dried plaster layer on the wall, and then also carefully, trying not to damage the print, they are removed.

If small defects occur during the application of the “bricks”, they are smoothed out with a spatula. With insufficient drying of the plastered wall, the impression may turn out to be smeared. In this case, the surface must be smoothed again with a spatula, wait a while, and reapply the form.

Another way to make a brick wall print is to use textured rubber rollers. The roller is rolled along the plastered wall in a horizontal direction. At one time, two to four brick rows are obtained (depending on the width of the roller).

With tape

To create artificial masonry, the place of future seams is marked with a pencil on a dry wall. First, from floor to ceiling, marks are made at 7.5 cm from one edge. Then on the opposite side. The horizontality of the lines can be controlled with a bubble or laser level.

A masking (paper) adhesive tape 1-1.5 cm wide is glued over the markings.. It is not always possible to find such tape on sale, so you often have to buy a larger size (3 cm) and cut the queens lengthwise.

Glue horizontal lines first, then vertical ones. This is a laborious task that will take several hours. How the markup looks like is shown in the diagram:

To make it easy to find the ends of the tape under a layer of mortar, they are taken out of the border of the area to be plastered.

The wall is covered with a solution directly on top of the adhesive tape. Layer thickness 3-5 mm.

After alignment, begin to pull on the ends of the tape. When the tape is torn off, a clear seam pattern remains on the surface. After complete drying, uneven edges are cleaned. This method will be clearly shown in the video below.

cutting bricks

Masonry joints can be cut on slightly dried plaster and with the help of improvised means - a small spatula, a thick knitting needle, or any other pointed objects of a suitable size.

It is necessary to “draw” the seams until the plaster has completely hardened. To prevent the wall from looking too smooth, at the end of the work it is better to walk on it with sandpaper. A rough surface with traced seams will look more like a brick wall. To make the wall look realistic, you can add small scratches and chips.

rusticated plaster

To imitate volumetric bricks or massive stones on the facades of houses, rusters are used - straight seams that divide the surface into blocks. There are several ways to create them:

• with the help of a wooden crate;
• stuffing with a metal rail;
• extrusion through templates;
• sawing with a saw under the rule (a construction tool in the form of a long ruler).

When creating masonry, it is absolutely not necessary to make the lines too even. There may be small irregularities at the seams, giving the wall a more expressive texture.

Video

How to make decorative brick-like plaster with your own hands is shown in the next video tutorial. The master marks and squeezes out the masonry seam using the rule.

The following video shows how to do it using tape.

You will find other master classes on applying decorative plaster in our video section.

Painting stucco bricks

After the plastered surface has dried, it is painted with acrylic, latex, alkyd or water-based compositions. When choosing a color, you can choose a natural red-brown or experiment by mixing them for a unique shade.

Color can be added to the plaster mixture when it is kneaded. But in this case, you will have to prepare the solution immediately for the entire wall, otherwise the shades in some areas may not match.

The seams are painted with a thin brush separately. A good technique is to apply two layers of paint of different colors: the second is applied a couple of minutes after the first, that is, before it dries. Sometimes individual bricks are also distinguished by a different shade from bright yellow to almost black.

To protect against dust and dirt, the surface is additionally treated with matte acrylic varnish.

We hope that the article was useful to you. Leave your feedback and questions in the comments below.

Decorative plasterArtificial foam brick: DIY finishing lesson

Modern trends in the design of interior decoration are increasingly prone to non-standard solutions, in particular, the use of unusual materials.White brick in the interiorwill embody order and cleanliness, and will also create a sophisticated accent. This type of decoration can exist in the premises of any functional accessory. In our article, we will look at the features that, as well as how to design it.

White brick in the interior: design and imitation methods

The easiest way to carry out such a design in a new building, where there is no interior decoration. In this casewhite brick in the interiorwill look the most realistic. For finishing, you only need to treat the surface with special tools and paint. At the same time, it is not necessary to clean or remove irregularities and minor flaws in the masonry - with them the design will look much more natural.

If the walls have already been subjected to finishing work more than once, or they are constructed of concrete or drywall, you will have to choose one of the most convenient imitation options in order towhite brick wall in the interiorlooked as natural as possible. Before that, it will be necessary to remove all signs of the former finish and also treat the walls with paint solutions to prevent dampening of the walls, fungus and other troubles.

White decorative brick in the interior

To design an intricate interior , resort to the use of silicate bricks. Photos of designs where usedwhite decorative brick in the interiorprovided in our article. Based on them, we can say that it has a rather peculiar appearance, attracting with its attractiveness. In addition, it has such qualities as moisture resistance, strength, excellent sound insulation and, importantly, environmental safety.

In addition to wall decoration, this material can be used for the construction of partitions, fireplace lining, decoration of columns, arches. In order for the surface to have the most attractive appearance, it can be opened with varnish.

A good photo example of such a design can be a loft-style living room, where white wall bricks in the interior(with bookshelves) emphasizes this direction in the best possible way.

White brick wall in the interior: imitation using tiles

In order to make a realistic brick wall, you can apply the tiling technique. This could be, for example,white brick wall in the kitchenor in the bathroom. For these premises, it is most rational to use ceramic tiles, which are most consistent with their quality characteristics. Tiles are of two types - in the form of individual bricks and a block of several rows. With its help, you can decorate not only the wall, but also a kitchen apron, fireplace lining and other architectural forms. If you decide to recreatewhite brick in the interiorusing ceramic tiles on your own, here it is worth considering one nuance: the gaps between its individual elements should be slightly larger than with conventional installation for greater naturalness.

The easiest option to display brickwork is to pick upwhite brick wallpaper in the interior. A big plus in the direction of this type of finish is also the fact that it can be produced independently, without the help of specialists, which will also save some money. Another indisputable advantage is that the surface of the wall on which the wallpaper will be glued does not require thorough cleaning and leveling. On the contrary, small irregularities will play a positive role.

White brick wall in the interior, can be covered with wallpaper with different styles of brickwork, the most suitable for the design of the room and at the same time it will always look “warm” and original.

White brick wall in the interior: choosing a design style

To date,white brick in the interiorliving quarters, as shown in a photo , can be found when decorating in such styles as modern minimalism, high-tech, modern. Interior design in village and Provence and country styles also welcome the design of individual walls in this way.White brick wall in the interior, decorated in the Scandinavian style will look easy and natural, especially since the main attributes of this style are purity and elegance. This type of decoration can often be found in the creation of Gothic interiors. Various interior design by professional designers can be viewed in our photo selection.

White brick wall in the interioris a must-have element in the loft style. Let's look at the photo, how it is decorated by professional designers with the help of photo wallpapers that create a three-dimensional realistic look in the living room. The interior will be filled with comfort and warmth if one of the walls with a built-in fireplace is lined with decorative bricks, as shown in the following photo.White brick in the interior of the living roomsmall sizes can somehow make the space heavier. In order to soften this effect, you can add such details to the interior as photo frames on the walls, curtains, put a soft carpet on the floor, and cover the sofa with a blanket. Beige furniture will be perfectly combined with white walls.

White brick wall in the interiorthe living room can become an accent element used in space zoning.

White brick wall in the kitchen

The kitchen space can be completely decorated with white brick or you can choose one wall for it, for example, near the dining table.White brick in the interior(a photo can be found in our th article ) is able to expand the kitchen space, make it brighter and more attractive. An original and practical solution would be to design an apron with tiles imitating brickwork. It will give a clean, neat look to the work surface, and at the same time, it is quite easy to wash it.White brick in the interior of the kitchenwill be perfectly combined with any textures and shades: wooden furniture, metal appliances, fabric curtains, etc.

The entrance hall is a room that requires a particularly painstaking approach to design, as it is the first to meet anyone who enters the house.White brick in the interior of the hallwaycan visually expand the space, which is important for small rooms. This design technique has been used by designers quite recently, but, as we see in the photo, it looks very impressive.White brick in the interiorcan focus on one of the walls of the hallway or be placed on the entire wall surface. To revive such an interior, experienced designers use the technique of pasting one of the walls with 3D photo wallpapers (the image of cities with small streets is especially relevant), as shown in the photo. Multi-colored lamps, flowerpots with plants, original paintings and other eye-catching elements will perfectly complement the interior.

White brickwork or its imitation in combination with textiles can help create a calm romantic atmosphere in the bedroom. Quite often, they decorate the wall at the head of the bed with it, complementing it with paintings, as shown in the photo, original lamps and other decorative elements.White brick wall in the interior of the bedroomIt will look quite impressive if you correctly choose bright textiles and contrasting furniture.

In most cases, will be appropriatewhite brick wallpaper in the interiorbedrooms (see photos in article ) or the use of decorative bricks. The tile is used much less frequently, since its mirroring surface will become inappropriate in a room where you want to relax and unwind.

Along with decorative stone,white brick in the interioris gaining more and more popularity and is turning into an obligatory element symbolizing an elite dwelling. It serves, in some way, as an indicator of longevity and safety, at the same time giving the room a special comfort, cleanliness and warmth.

This article discusses such a design technique as a brick wall in the interior of a living space: features of surface decoration, common masonry methods, tips on choosing colors and materials to create the appropriate effect. The text contains recommendations that will help give the room a stylish look, taking into account its purpose, as well as create a beautiful imitation of brickwork with your own hands.

Brick walls are great for interior design in style.

The design of the apartment, in the interior of which there is a brick wall, despite the apparent rudeness, is successfully used by decorators. Finishing in the form of natural or facing bricks allows you to create a contrast in the room, give it an exclusive and natural look, and also attract attention. In addition, a decorative brick wall can be used as a base for many modern styles.

To create the effect of a brick wall, various materials can be used:

• facing brick;
• glass brick;
• imitation with wallpaper;
• plastic panels;
• clinker tiles;
• plaster imitation, etc.

How to create a bare brick wall in the interior: photos of the premises and recommendations

The most natural way to get a brick wall is to build it or expose an existing surface. This option is available to residents of private brick houses. It is enough just to leave one of the walls unfinished to get a unique design. If the house is new, then the alteration will be minimal. In this case, the walls can be left in their original form, while removing small impurities that remained after construction. If the building is old, careful processing will be required.

Be sure to remove all layers:

• whitewash;
• primer;
• plaster;
• finishing material.

You also need to carefully remove traces of construction dust, cement and eliminate all stains. For this, special solutions are used. After that, the surface of the wall is polished, all seams are overwritten. As a decor for this background, a picture in a frame from a wide baguette, or a photo, is suitable.

Helpful advice! Cleaned brickwork in the interior will look attractive if you open it with a colorless varnish. To avoid the effect of "wet stone" it is desirable to use matte compositions.

Imitation of a brick wall: photo of interiors using wallpaper

Unlike private houses, apartments do not have suitable conditions for the construction of brick walls. There are restrictions on the weight acting on the floors, so an additional partition can cause overloading, cracking and even collapse. It will also not work to expose the wall, since slabs and other monolithic materials are most often used for the construction of multi-storey buildings.

Residents of city apartments can create an imitation of a brick wall using wallpaper. This method does not require significant modifications. The material quite realistically conveys the features of the texture. The wallpaper imitates all scuffs, cracks and other relief features of natural brick. At the same time, the buyer can choose the appropriate color and design in the store or paint the wallpaper on their own.

Plastic panels can be used to create a brick wall. This finishing material is decorated with a masonry print that looks like the real thing. Unlike wallpaper, plastic panels are more practical, but you will have to tinker with their installation. In addition, this material cannot be called completely environmentally friendly.

Lightweight brickwork: photo of rooms with facing bricks

In modern interiors, facing bricks are often used to create beautiful walls. This material is called thin-walled. Facing bricks are much thinner than those used for construction, so they are ideal for residential applications. As a result, it becomes possible to save useful centimeters of area, since finishing takes up a minimum volume. Another advantage of facing bricks is its light weight. This material allows you to decorate thin walls without the risk of their destruction.

There is a wide range of facing bricks on the market, so that the consumer can choose the appropriate option. All colors, textures and shapes are available to customers, as well as material with a matte or glossy surface. In addition, in stores you can find bricks that look like new or aged.

To create a decorative brick wall, glue is used, with which the elements are fixed on the surface. For these purposes, it is desirable to use compositions intended for laying natural or artificial stone.

Helpful advice! After the wall is completed, all seams between the bricks should be treated with tile grout.

Scope of facing bricks:

• construction of columns and partitions;
• execution of full or partial wall decoration for brickwork;
• decoration of the zone by the fireplace;
• creation of niches and shelving.

This material is strong, durable and environmentally friendly, presented in a wide range of colors. Therefore, it can be successfully used both for creating a white brick wall in the kitchen, and for finishing surfaces in the living room, bedroom, hallway and corridor. The material has the correct shape, which greatly facilitates its installation.

The use of tiles and glass bricks in the interior

Brick tiles will be an excellent finishing material. Its second name is “brick veneer”. Unlike the previous version, this tile is lighter and thinner. Most often you can see in the photo white brick walls in the kitchen or bathroom, finished with this material, although there are other colors.

Tiles can be clinker and ceramic. Installation of finishing is carried out in the same way as laying ordinary tiles. To do this, the surface is carefully prepared and leveled. The tile is fixed on the wall with a special adhesive. To avoid distortion, experts recommend using plastic crosses.

Glass bricks are used in modern interiors. The material is presented in the form of matte or transparent blocks of several colors:

• red;
• gray;
• green;
• yellow.

The presence of decorative bricks in the interior will fill the room with light and visually expand its space. The material is suitable for wall decoration in the hallway, living room or corridor. Glass brick can also be used for zoning a room. In apartments with a limited area, it can act not only as a decorative finish, but also serve as a screen.

Varieties and properties. Possibilities of using decorative bricks in the interior of an apartment and a house.

The choice of colors for the interior with brick walls

The standard shade of brick walls is red-brown. But this does not mean that the interior of the room can be limited only to this color. When choosing a design, you should consider the style and purpose of the room.

The color of artificial brick in the interior can be any:

• white;
• black;
• gray;
• beige;
• colorless, etc.

In addition, you can always paint the surface in any shade you like.

Helpful advice! A brown, navy or burgundy wall in the bedroom will give the setting a romantic atmosphere, especially if you complement the interior with flickering candles.

Advantages of a white brick wall in the interior

White is most often used in styles such as Scandinavian and minimalism. In both cases, the use of a light-colored brick wall allows you to enrich the restrained decoration of the room with minimal funds. At the same time, it is desirable to deprive the atmosphere of color so as not to overload the visual perception of the room.

Painting ordinary masonry is a great way to create a white brick wall in the interior. A light shade allows you to achieve the effect of a visual increase in space, which is a definite advantage if the area of ​​\u200b\u200bthe room is limited in size. In addition, white color will be an excellent background for demonstrating the decorative details of the interior.

A combination of white brick in the interior with ordinary masonry is allowed. This design is suitable for any room (bathroom, kitchen, living room or bedroom), subject to proper placement. White color allows you to emphasize the individuality of the room and create an exclusive interior. Even if all the walls in the room are made in white, the brick of the same shade will still stand out against the general background, thanks to its pronounced texture. The atmosphere is weightless and airy.

Features of interiors with a brick wall in gray

Like white, gray is considered neutral. It is used by designers to create a calm background, thanks to which the decorative elements of the interior and furniture will look as attractive as possible. Depending on the saturation, the gray wall will perform a certain function in the interior and create the desired effect.

Using a light gray color scheme, you can expand the interior space of the room, as well as dim the brightness a little. This shade is perfect for rooms that are too brightly lit. Dark gray color creates an intimate and intimate atmosphere, it calms, although it slightly hides the volume of the room. Gray is an integral part of modern loft or minimalist interiors, but it can also be used for classic interior design.

Using a red brick wall in the interior

"Red" is called masonry, made of ordinary clay-based bricks. Nevertheless, nothing prevents the owner from repainting such a wall in any other shade over time. Red brick goes well with almost all existing styles. The classic and gothic direction is no exception.

Red brickwork immediately catches the eye and attracts attention. The wall itself can be used as the main decorative element in the interior of the room, so it does not need additional decorations.

Note! You should carefully select furniture in a room with a red brick wall. Some furnishings may fade or simply get lost against its background, so it is advisable to avoid simple shapes and shades that are close in tone.

How to beat a brick wall in the interior of the kitchen, bathroom, living room, hallway and bedroom

Facing bricks, like other types of materials used to create imitation, can be used to decorate walls in any room of the house, for example, in a bedroom, corridor, living room, kitchen, bathroom or hallway. The main thing is that the material and its colors fit into the overall design of the room. When choosing a material, the purpose of the room must also be taken into account. The operating conditions of the room affect the life of the finish and other nuances. For example, the bathroom and kitchen are characterized by temperature fluctuations and high humidity. An ordinary brick, properly treated, will cope with these conditions perfectly, while a foam plastic imitation or wallpaper is unlikely to withstand such an impact.

In the kitchen, the wall decoration is exposed to contamination. For this reason, it is desirable to select a material that is not afraid of cleaning products and frequent cleaning. In the hallway or corridor, the finish is subjected to mechanical stress, so the material must be resistant to abrasion.

How to use brick in the interior of the kitchen and bathroom

The design of the kitchen is practically unlimited. The brick in the interior of this room will originally emphasize the appearance of the equipment present. With the help of decorative bricks, you can zoning the space and highlight the area where the dining table will stand.

Various color combinations are allowed. The brick wall in the kitchen can consist of black, gray and white elements. They are versatile and complement each other well. Other combinations are also possible. The ideal option for the kitchen would be brick tiles.

With this material you can:

• arrange a kitchen island or countertop;
• finish the apron (the area between the appliances, wall cabinets and work surface);
• arrange the entire wall (in the absence of hinged furniture structures).

Moisture-resistant brick has been successfully used for wall decoration in the bathroom. It fits perfectly into the interior and withstands the operating conditions of the room. Brickwork can be real or present in the form of imitation. Glass blocks are allowed. They are durable, so they are suitable not only for finishing walls, but also for floors. This material allows you to supply heating and even install spectacular lighting.

Note! Under the influence of adverse factors, bare brick will collapse. Therefore, it is desirable to treat the surface of the wall with a special protective agent before painting, or opening be varnished.

Making a brick wall in the interior of the living room, hallway and bedroom

In the living room, a brick wall can be used as a backdrop for furniture, fine appliances, and decorative accessories. Many designers use a fireplace to create a cozy, comfortable and warm atmosphere in a room. In this case, the interior can be supplemented with a self-made brick wall made of plaster or decorative gypsum bricks.

If the living room is made in the Greek style, it is advisable to use columns and plaster bricks to create the appropriate decor. Partitions made of glass elements are suitable for dividing the space between the living room and the kitchen, if these rooms are combined.

Brick decoration will be appropriate in the bedroom. White masonry will emphasize the modern style of the rest room, while giving the room charm and lightness. A brick wall in the interior of a two-level apartment or studio will look especially impressive. This element can be arranged in the form of an arch, which will be installed instead of the front door to the rest room. Brick walls are suitable for bedrooms decorated in Provence, loft, country, classic and Scandinavian styles.

The best option for the hallway would be a brick-like tile with the effect of a “destroyed edge”. This finish can be used for zoning rooms if the entrance hall is adjacent to the living room or kitchen. As a decor for a brick wall, you can use lamps that imitate candles. Since there are no windows in the hallway and the level of lighting is low, it is better to give preference to finishing in white or other light shades.

How to make a brick wall: manufacturing and painting technology

Before starting work, it is worth deciding on the design. Finishing in the form of brickwork can be arranged in various ways:

• fragment;
• in the form of an accent;
• a whole wall;
• as a decorative element.

If partial finishing is required, a small area of ​​\u200b\u200bthe surface is covered with bricks. This method allows you to emphasize the solidity of the walls of the living space.

Helpful advice! It is advisable to use the design in the form of a fragment to create an interior in the Scandinavian style.

Wall with imitation brickwork as an accent

With the help of an accent, you can highlight a certain part of the wall that requires special attention. This method is most often used to advantageously beat the central objects of the interior:

• area around the fireplace;
• wall located behind the head of the bed;
• area where a TV is installed, etc.

To highlight a separate part of the room, which has the main semantic load, a whole wall is drawn up. In the living room, this method is used to shade the sofa, in the kitchen - the dining area, in the bedroom - the bed.

With the help of bricks, you can make individual architectural details. Such an element can be a section of a wall located separately, an arch or.

How to create an imitation of a brick wall with your own hands

Having determined the key design points, you can begin to create a finishing material to imitate masonry. To make bricks, you will need a special form for pouring and a coloring composition. Experts advise using clear varnish and brick gypsum for this. A polyurethane mold for pouring can be purchased at a store or made independently from plastic. The main thing is that it has the appropriate size and shape. And the size of the bricks can be different, as long as they remain rectangular.

First, in accordance with the instructions, you need to prepare a gypsum mixture. Then it is placed in a mold for pouring and aged until completely dry. After making sure that the bricks are frozen, you can get them. Finished elements are fixed on the wall with an adhesive designed for laying tiled products. To get a more realistic effect, you can partially break the edge of some bricks. The thickness and size of the elements is selected at your own discretion.

How to paint a brick wall in the interior

You should not start painting immediately after the masonry is completed. The finish must dry to allow the moisture level to reach its natural level. This process can take several months, but all active alkalis are completely neutralized during this time.

Brick wall painting technology:

1. The surface is cleaned from defects and residues of the solution using a grinder.
2. A primer layer with antiseptic additives is applied.
3. The wall is painted lengthwise so that each subsequent strip overlaps the previous one by 2-3 cm.
4. After the first layer has dried, the second layer is applied in a vertical direction.

Anyone can make and paint a brick wall, the main thing is to choose the right materials for this and adhere to the requirements of the technology. If the apartment does not allow you to use real brick as a decor, you can always make an imitation of it. To do this, it is enough to paint the wall in the desired color and apply decorative seams over it, or use a special roller and putty to get a more voluminous result.