How to align the inner and outer corners of the walls? Decorative corners made of aluminum, wood or silicone on the corners of the walls: how to decorate under or on the wallpaper, what is best to glue and fasten Decorative metal corners on the corners of the walls of the pediment.
The most characteristic part of the house, in terms of architectural decoration, is the corner of the house. In this part of the building, you can see all, or almost all, elements of the facade stucco.
Roof overhang decor
The overhang of the roof is decorated with a large or small, complex or simple, single or composite subroofing cornice. A little lower there may be an additional dividing strip on the facade, which allows for color zoning of the facade of the house. The corner of the house itself is decorated with a variety of options in order to visually reduce or increase the height of the building. Rusts, pilasters, combined options are the main types of facade decor for the corner of the house. A separate and most basic part of the decoration of the exterior walls of the house is the facade decoration of the window.
window decor
The main task in the decoration of the window opening is also the alignment of the general proportions of the building due to the decor. More details and details about window slope design you can see on a separate page of our site. Also a very important part of the facade decor is the interfloor dividing strip. With the help of this decor element, the issue of separating different materials for decorating the walls of the facade of the house is easily solved.
home wall decor
Also, with the help of interfloor molding, we visually reduce the not always proportional height of the house. And the final one in the set of facade decoration of the walls of a private house is. This element is primarily a logical separator between the basement part of the structure and the main wall. Also, the basement profile can perform technical functions - smoothing the difference between the protrusions of the wall and the basement, drip, etc.
Below are a few examples of facade decoration on the corner of the house. You can see more ready-made design options for the facade of the whole house HERE.
1. House Facade Decor Example
In this example of the design of the facade of a country house, the under-roof cornice consists of two separate elements, forming a massive filling.
Making the corner of the house
The corners of the house are decorated with beveled rusticated stones. Rusts at the corner do not join with each other, but are mounted each on their own side.
Window decor, slope
The windows of the second floor are framed by a molding 12 cm wide along the wall. The top of the window is supplemented with a profile with an angle cut, as well as a keystone. On the windows of the first floor, in addition to the molding, a decorative window sill profile was used.
decorative division
In this case, a double interstorey division of the facade is applied. One strip goes along the line of the second floor window sills, and the other along the floor slab of the first and second floors. This technique helps to significantly underestimate the visual height of the building. Decorative frames from a thin facade profile are used between the dividing strips.
Basement decoration
Wall finishing materials
2. House Facade Decor Example
On this fragment of the architectural decoration of the facade of a private house, the under-roof space is also filled with a combination of two separate stucco elements. The height of the composition is greater than its departure along the roof, which gives a strong effect that underestimates the overall height of the house.
Facade stucco molding on windows
The second floor windows are framed by two separate moldings. Along the edge of the slope there is a flat profile, around it there is a symmetrical convex element. Brackets are cut into the outer molding of the window, which support the massive top of the window. The profile of the top of the window is made with a bevel, which allows not to cover it with additional metal. The windows on the first floor are complemented by a window sill profile and a curly top with an angle trim.
Making the corner of the house
The corners of the house are decorated with rustication of various sizes with chamfers on four sides. Rusts are located at a short distance from the corner.
Interfloor separation
In this example, one strip goes along the line of the window sills of the second floor, and the other along the floor slab of the first and second floors. This technique helps to significantly underestimate the visual height of the building.
Finishing the basement of the house
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
3. House Facade Decor Example
In this set of facade decor of a private house, the roof overhang is also decorated with a combination of two separate stucco elements. The height and reach of the set are almost the same, which gives a complete and deep filling of this part of the facade of the house.
window framing
The windows of the second and first floors are decorated with a simple set of moldings and window sills with keystones.
Finishing the corners of the house with foam
The corners of the house are decorated with rustication of different sizes of a simple rectangular shape without a chamfer. This version of rustication is usually mounted from molded products.
Interfloor separation is made using two types of small size profiles located at a distance from each other. The gap between them is painted in the color of the decor, thanks to which we get a wide separation on the facade.
plinth trim
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
4. House Facade Decor Example
In this set of facade decor of a private house, the roof overhang is also decorated with a combination of two separate stucco elements. The section of the elements has a greater number of bends and steps compared to the previous version.
Decorative window trim outside
The windows of the second and first floors are decorated with a large molding around the perimeter. The cross section of the molding has a pronounced, convex, rounded shape. The top of the window is mounted at a distance from the molding and is supported by decorative brackets.
Finishing the corners of the facade of the house
The corners of the house are decorated with pilasters of relatively small width along the facade. Each element is located a short distance from the corner of the house.
Dividing strip
In the interfloor division, two separate elements are used between which there is a strip of architectural ornament. The upper dividing strip runs along the bottom line of the second floor windows. The lower strip runs along the interfloor slab.
Finishing the foundation of the house
The compositional design of the basement part of the house can also include, in this case, the strip running along the bottom line of the first floor windows. This option looks good in the presence of the so-called French windows - when the bottom of the windows is not high from the floor. The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
5. House Facade Decor Example
This set of architectural stucco elements can be described as more complex in terms of geometry, complete set with decorative elements. Techniques were used to bypass additional thicknesses to create more relief and volume.
Window decoration outside the house
The windows of the second floor are framed with a wide relief molding 18 cm wide. From the window sill profile, additional reliefs imitating brackets are formed under the moldings by trimming at 45 degrees. The top of the window also has a complex relief due to undercuts at an angle. The keystone is embedded in the profile part of the top of the window.
Exterior decoration of the corners of the house
Dividing strip
Finishing the basement of the house
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The first floor is completed with rustication. This type of finish is performed by facades when insulating walls. Grooves are made in the insulation, which are then reinforced with the help of corners together with the main wall. The basement is decorated with marble or granite.
6. House Facade Decor Example
In this case, the main distinguishing feature of this composition is the massive, voluminous framing of the windows. The subroofing cornice is made of two separate elements. mounted at a distance from each other. Gap between top. the main cornice and a smaller strip on the wall are painted in the color of the decor, which visually gives a single composition.
Window design outside
The windows of the first and second floors are trimmed with small molding around the perimeter. Moreover, a figured frame was created from it into which the brackets are inscribed. On the first floor, a straight top window from a large profile has been added. In addition to it, there is an arched element on the second floor.
Decor of the corners of the house with foam plastic
The corners of the house are decorated with simple rectangular rustication of the same size. Such a performance is usually carried out by the performers of facade work on site or from a molded product.
Dividing strip
A voluminous, protruding dividing strip was launched between the floors. Its dimensions and volume create an additional relief on the facade of the house.
Finishing the basement of the house
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
related posts:
Facade Design ~ 13+ Finished Appearance Solutions…
When you make repairs with your own hands, if you are not a professional in this matter, many questions arise that require an immediate and correct solution. This also applies to finishing the corners in the apartment. Corners are external and internal, rectangular and not very. And now the problem arose, how to put them in order, that is, if possible, straighten and decorate. Internal corners are often not very noticeable due to their curvature, because they are hidden under wallpaper or under decorative plaster and filled with furniture. Another thing is the outer corners. They are usually always in sight. But let's try to figure it out and find ways to solve this problem: during the repair, correct the curvature of the corners allowed during construction and somehow transform the corners.
So, internal corners walls can be aligned in several ways, and here are the two most common:
- by plastering the corner and adjacent wall
- corner correction with drywall
Plaster of any surfaces, as you know, the process is rather laborious, dirty and lengthy. If you decide to go this way, calculate in advance all the pros and cons. We need to see if the angle is far from perfect (90 degrees). If the error is too large, then there is a lot of work to be done, because along with the corner, you will have to plaster most of the wall. And more than 2 cm plaster cannot be applied, otherwise the thick layer will crack. And you will have to do this work several times, applying layer after layer. You need to figure out if you really need this ideal angle, or maybe you can leave everything as it is, limiting yourself to its decorative finish. If you still decide to plaster, use a metal corner called countershulz. The corner is pre-primed and the counter-shulz is glued onto the putty, slightly pressing it into the still soft putty mixture. This corner will provide the desired right angle. The contraschultz is equipped with a reinforced mesh on both sides along the edges, which will go under the plaster and thereby make the corner strong and even.
With help drywall You can even out a variety of irregularities on any surface. If the curvature of the corner is small (up to 2 centimeters), then a frameless method of mounting drywall sheets is used. If more than 2 cm, then a frame is constructed from wooden bars or metal profiles and drywall is attached to them. The advantage of this method of aligning corners and walls is that with the help of drywall sheets you can achieve almost perfectly even walls and right angles in the room.
But there is a big minus - the room is getting smaller.
Which way to choose, decide for yourself. Whether or not to align the corners and walls is also a question for everyone to decide for themselves. And if you think that decorating uneven corners will be enough, read the article further.
If there are children or pets in the house, then the outer corners are especially vulnerable. The wallpaper will peel off, the decorative plaster at the corners will fall off. Bad picture. But is there any way to exclude this process? Certainly! After all, a lot of decorative building materials are now on sale that allow you to do this.
I chose plastic corners for myself to protect external corners in my corridor from damage. This is the outer corner, covered with wallpaper. We recently renovated and the wallpaper is still fresh.
But if you look closely, the corner looks like this: an ugly joint between different wallpapers.
I measured the height of the corner from floor to ceiling and bought a plastic corner from the hardware store. I cut off the desired size with ordinary scissors and smeared it with liquid nails inside.
And finally glued to the corner. Agree, so much better. Of course, it was possible to pick up a corner in a different color, but I wanted a contrast.
This is what it looks like up close. The corner in our corridor began to look neater and minor irregularities disappeared.
As you already understood, the outer corner can be leveled and protected from damage using plastic corners. Now we are talking about those corners that are glued directly on top of the wallpaper. In hardware stores, they are presented in different colors. The length of the corners is usually 3 meters, but the width is different: from the narrowest to the widest. You need to choose the width, depending on how much the corner is curved.
The larger the flaw, the wider the corner will need. Look at the photo below, in stores you can find rectangular and even semicircular corners. Before you buy, think about which corner is best for your case. 
But there are also such corners that are glued to the outer or inner corners even before the wallpaper is pasted onto the walls. These corners are glued to the inner or outer corner, puttied and due to this the corner becomes much smoother. Wallpaper is glued on top, decorative plaster or other fine finishing is applied.
As mentioned earlier, with a plastic corner, you can close both the outer and inner corners and even the joint between the wallpaper. But then it will not be a corner, but a plastic strip. Some decorative plastic corners are equipped with adhesive tape, removing the protective layer from which you can stick the plastic on the wall without using glue.
Plastic corners look good on walls with wallpaper. But plastic does not fit very well with tile. But if you don't mind a combination of plastic and tile, you can use them together.
There are plastic corners that look like metal, such corners can fit almost any tile.
Ceramic corners can also be used to finish the outer and inner corners of walls with ceramic tiles.
If the outer (or inner) corner is far from perfect, you can hide its flaws under a decorative stone.
In construction stores you will find the shade and shape of artificial stone that you like.
Repair in the apartment with his own hands at least once in his life was done, probably, by every person. Non-professionals sometimes find it difficult to cope with some tasks.
If you can level the surfaces of the floor and ceiling without any problems, then finishing the corners of the walls is not an easy task and will require some knowledge and skills. Protecting the corners of the walls is a must if there are small children and animals in the apartment.
After all, plaster mixtures are not durable, and one has only to touch the corner, as the plaster can crumble, especially at the outer corners.
Various types of corner protection
If the corners are very skewed, then you will have to spend a lot of effort and material to align them. The inner corners are more or less protected by wallpaper, which allows you to hide the bumps. But the outer corners are always in sight and it is not easy to hide damage here. This requires the use of a special decorative coating.
To strengthen the internal corners of the walls, plastering of the corner itself and the wall adjacent to it is often used, and drywall is also used to correct and finish the corners.
You can protect the corners in the apartment in different ways and materials. When applying plaster, it should be borne in mind that this method is quite laborious and time-consuming. If the corners of the walls are too uneven, then a large amount of plaster will be required not only on the corner, but also on the walls.
A special metal corner will help form an even corner As you know, the layer of plaster should not exceed 2 cm, otherwise cracks will occur. To close the inner corner, it is necessary to use a metal counter-corner.
The corner of the wall is pre-treated with a primer, then the counter-shults are covered with a layer of putty and, pressing down, are glued.
This metal corner has a reinforced mesh along the edges, which subsequently goes under the plaster and makes the corner even.
Using drywall and metal corner profile
Very often drywall helps to finish the corners and walls. With a slight curvature of the corner itself, a frameless method of fixing drywall is used, but if the curvature is more than 2 cm, it is worth using a frame made of a metal profile or wooden bars. This method allows you to achieve almost perfectly even walls and ceilings, but at the same time the size of the room itself is significantly reduced.
You can trim the outer corners of the walls in the apartment using a metal corner profile. This method of protecting the corners of the walls is the most optimal and allows you to protect the corner from any mechanical damage.
After the completion of all repairs, this corner becomes completely invisible.
The standard length of the metal corner is 3 m, if necessary, it can be easily cut with metal scissors.
If the corner is straight and even, then you can attach the profile with small nails, but if there are some irregularities, it is best to use alabaster or plaster to install the profile.
Protective metal corners allow you to achieve perfectly even corners in the apartment. Even a non-professional can cope with their installation.
Use of plastic PVC corners
PVC fittings are glued on top of the finish To date, one of the most popular ways to design external corners is the use of plastic. Such wall corners are widely used and are suitable not only for decorating external corners, but also for decorating window and door slopes, panel joints and arches.
Available in a variety of colors, there are even transparent, have a width of 10 to 100 mm. The length of the PVC corners ranges from 1.5 to 3.0 m. They are already glued to the finished ones, preliminarily, often they complete the finishing work.
Advantages of PVC corners:
- affordable price;
- ease of use even for beginners in repair;
- a wide variety of shades;
- visually align even strongly curved corners;
- long term in operation;
- fairly easy to care for.
The decor of the corner in this way helps to avoid destruction and mechanical damage. Before gluing PVC corners, it is necessary to determine the degree of damage to the wall corner in order to correctly select the width of the plastic corner. Then you need to use a drywall knife.
You can glue these corners in different ways:
- using mounting adhesive for plastic products;
- using a solution of a dry putty mixture;
- glue can initially be applied to the PVC corner.
Apply the adhesive according to the instructions on the surface of the corner and press the PVC corner to the wall, remove excess glue and wait until completely dry. For best results, it is recommended to fix the plastic corners with masking tape.
The use of corners made of wood and polystyrene foam
Wooden corners are not very plastic The decor of the corners of the walls in the apartment can also be done using wood corners. The advantages of this finish are that wood is an environmentally friendly material and has an attractive appearance.
Its plasticity allows you to carve the surface of a wooden corner, which will give the room a unique design. Using such decoration of the room, it is worth considering the need to avoid a sharp temperature drop, otherwise the wooden corners are deformed. It is impossible to glue this type of corners in rooms with high humidity. How to finish the corners with putty, see this video:
Probably the most affordable way to finish the corners of the walls of an apartment is a polystyrene corner. Such corners are easy to install and can be repeatedly painted. They are easy to care for, as they do not absorb dirt.
Such products are used in rooms with different temperature conditions and high moisture content.
Stone corners and their advantages
Synthetic stone is used to finish the corners Stone has recently become one of the most popular ways to decorate and reinforce wall corners.
There are more and more rooms decorated with artificial stone.
With this method of design, there is no need for walls in the apartment, it is especially appropriate to use decorative stone with very uneven outer corners.
It should be noted that artificial stone is much lighter and more affordable than its natural counterpart and is easier to maintain and maintain.
You can glue the decorative stone yourself, for this you must first clean them from dust and dirt. Then dilute a special tile adhesive according to the instructions. Apply it in a thin layer with a spatula on the stone and in a thick layer with small cakes on the wall. The stone is applied to the wall and pressed, the excess solution is removed. For information on how to trim the corners with stone, see this video:
After pasting three rows, you should stop and let the mortar dry, then you can put three more rows of decorative stone. And so gradually finish the entire surface. Thanks to a huge selection of colors and textures, decorative stone can be matched to any interior.
Combine different ways of finishing corners Following the listed types of finishing corners in the apartment, certain conclusions can be drawn. The most expensive type of finish is artificial stone, and the most time-consuming method of finishing is considered to be leveling the corners with drywall. Different types of finishing corners can be easily combined with each other and used in repairs at the same time. External corners with such protection will be installed "in the shield" and have an aesthetic appearance for many years.
Empty corners are common in most apartments. Another standard practice is to place large furniture in a corner, although a more suitable place can be found for it if desired.
With such a dismissive attitude to the arrangement of the corner space, the mass of usable area disappears. How to fill in the corners to make the apartment more practical and comfortable?
1. Angles reversed
Protruding corners can also be used rationally. For example, arrange unusual shelves on them. Such furniture is ideal for apartments with an open or studio layout.
2. Spacious closet
A corner wardrobe is a real salvation for those who do not know how to fill the empty space in the bedroom or living room. Modern storage systems allow you to use every square centimeter to good use. As a result, the corner cabinet is in no way inferior to the usual linear one in terms of spaciousness or even surpasses it in this characteristic.
3. Functional mini shelves
Even the smallest corner can be useful. This will help concise corner shelves that fit perfectly into any interior - from the hallway to the living room.
4. Children's joy
In small apartments, it can be problematic to equip a full-fledged play area for children. Moreover, children seek solitude so that adults do not distract them from an exciting game. A canopy in the corner will help equip the play area. Another plus is that by closing the curtain, in an instant it will be possible to hide the scattered toys from suddenly arriving guests.
5. Corner hidden behind a screen
A screen is an item that will make any interior more refined and elegant. If the area of \u200b\u200bthe room allows, then the screen can be placed at some distance from the corner. So the screen will become a way to divide the room, and if necessary, a certain functional area is placed behind it. In a small room, the screen is placed close to the wall, acting as a decor.
6. Work with pleasure
Working from home requires full concentration. A computer corner table will allow you to accommodate all the necessary equipment and documents. In addition, this position of the table will allow you not to be distracted by interfering external factors.
7. Practical hallway hanger
A standard entrance hall is a miniature room where every centimeter of space is important. The corner hanger will allow you to conveniently place outerwear, umbrellas and bags.
8. Graceful console
A console table is an unfamiliar piece of furniture for most people. But thanks to its compact size, it will fit perfectly into any corner. Depending on the size, the console table can be used either as a work table or as a decorative one.
9. Secluded reading space
The more places in the apartment where you can retire - the more comfortable it seems. A comfortable chair, small table or nightstand is all that is needed to set up a comfortable reading space. But do not forget about the careful coverage of this area.
10. A special angle for a personal art object
It is not necessary to place a real art object in the corner. It will be replaced by any unusual object - from an original vase to a mirror in a carved frame. The main thing is to choose a suitable environment for him in order to create a holistic decorative composition. For example, a miniature bedside table and a table lampshade.
11. Let there be light
Multi-level lighting will never be superfluous. A floor lamp in the corner will separate the reception area, making it more comfortable.
12. The best angle for guests
The guest area will replace a full-fledged living room if the size of the apartment does not provide for a separate room for friendly gatherings. Depending on the size of the room, either a seating area or several armchairs can be placed in the guest area. An obligatory element is a compact coffee table that will become the center of the guest area.
13. Corner gallery
Empty walls are a clear sign that the interior was designed without the participation of professionals. But the situation can be corrected by decorating adjacent walls in an original way. Just hang a lot of pictures or photos in the corner. Ready-made corner frames of the original form can be bought.
Coffee table in the corner.
If there is large furniture near adjacent walls, then the angle between them remains free. Put a small coffee table with a lamp there. An unusual visual effect is guaranteed.
Today, decorative corners on the corners of the walls are an important element of decor. They help protect problem areas from mechanical damage. Their installation prevents damage to expensive finishes, gives the interior frame a finished look. Let's talk about where such elements can be used, what materials they are made of, how they are attached to the surface.
Scope of use
Corners are the most problematic place. When performing repairs, it is difficult to decorate them beautifully. Wallpaper pasted on them, after some time, lift up and peel off. When furniture is brought into rooms or rearranged, solid large elements are often damaged, which leads to a sloppy appearance. All this can be prevented by purchasing decorative wall corners and installing them at the stage of finishing. They will completely close the ends with themselves, allow you to form a smooth transition from one material to another, cover up some sins of poor-quality work of the painter.
Decorative corners - an element of decor that gives the finish a complete look Source design-homes.ru
In addition to a purely technical function, the corners carry an aesthetic load. If you close the perimeter of the window opening with a white profile, the window will look better. This technique is often used when, according to design requirements, the window is not covered with curtains, but is framed with blinds. In this case, the color of the corner should match the color of the wall finish. When a contrast technique is applied, the profile acts as a separate element of decor. It immediately catches the eye and becomes an original part of the interior.
Designers love to use decorative corners for the outer frame of the doorway. This becomes especially relevant when the thickness of the wall is greater than the width of the door frame. This difference is completely closed by extensions, and then corner elements are superimposed on top of them, the color of which completely matches the color of the door.
The outer corners of the walls, arched openings, ledges and niches need additional protection. Installing corners will prevent the risk of damage from accidental impact. It is relevant when the walls are simply plastered or covered with wallpaper. In addition, it is easier to do cleaning and eliminate traces of hands. If the corners are closed with a plastic profile, it will be easier to keep clean.
Corners can close the ends of the wall, finished with ceramic tiles or wall panels. Often in such materials, the edges remain unpolished, so the edge looks unattractive. Mounting the profile helps to completely hide such a defect.
Another area of application is the decoration of the outer corners of structures assembled using drywall. Today, the technology of creating open shelves, racks from this material is actively used. Joints closed with a profile look more aesthetically pleasing.
Arch, the corners of which are closed with a decorative corner
With the help of decorative corners, you can make a frame for large mirrors, close skirting boards with them, any joints that take the form of an angle. There are profiles for plastering, models for ceramic tiles, profile products for bathtubs, furniture.
Varieties of corners
The appearance of products and their technical characteristics depend on the material from which the profiles are made. It also defines the scope.
metal
For the manufacture of such corners, aluminum, brass or steel is used. Corners made of brass and steel have a smooth, well-polished surface. The aluminum profile is presented in three varieties. There are polished samples, anodized products, corners with a decorative coating on sale.
Most often, such products are used in the furniture industry, but designers also like to use them when the walls are decorated with furniture panels, MDF or chipboard sheets. In this case, a metal profile is selected, painted to match the base material. Unpainted metal corners are suitable for framing mirrors, paintings or posters placed under glass.
Craftsmen use metal corners to create the basis for the installation of light armstrong suspended ceiling structures. With the help of them it is possible to carry out the installation of light plastic panels. They can act as anti-slip pads or protect the edge of the structure from chips and cracks.
Finishing wooden
Their main area of use is the decoration of external or internal ends of walls sheathed with a block house, planken or clapboard. They are made from expensive or cheap types of wood, so they have a different price. They can be additionally painted and varnished, various patterns can be created on the surface using a milling machine.
Recently, designers like to use a technique that allows you to cover the ends of the wall, pasted over with wallpaper or painted with paint. This is only permissible if there are strictly straight surfaces.
Source avatars.mds.yandex.netWhen choosing this finishing option, it is important to consider that a wooden corner is a fragile product, with the slightest effort it can break or crack. Excessive moisture or prolonged overheating can spoil its attractive appearance. Therefore, they should not finish the walls and window openings in the bathroom or in the bath.
Wooden corners - a fragile product
Wooden elements are fastened with wood glue or PVA glue. Liquid nails are suitable for the indicated purposes. If the walls are not concrete, you can also fix wooden corners with finishing nails. In this case, the gap between the edge of the profile and the head of the nail must be at least 10 times the diameter of the fastener.
Silicone transparent corners
Such products are ideal for framing corners covered with wallpaper. They are very soft to the touch. If they close the corners in the children's room, the children will be less injured. The silicone profile has only one drawback: its transparent texture is unable to close the finish defects from prying eyes. This must be taken into account when choosing and purchasing products of such a plan.
Silicone profile is an excellent tool to ensure the safety of children Source d.allegroimg.com
On our website you can find contacts of construction companies that. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".
Polyurethane
With the advent of polymeric materials, the possibilities for decorating residential premises have expanded markedly. On sale there are corners with smooth surfaces, with a complex relief that skillfully imitates the texture of gypsum stucco. In contrast to the plastic profile, the thickness of the shelf is greater. This complicates the installation process, but the appearance of the finish benefits from this. The polyurethane corner creates effect of solidity. In addition, it can be additionally painted with paints used in decoration, but there is no plastic profile.
In the manufacture of products, pressing technology is used. It allows you to create decorative profiles of various shapes. They are not afraid of moisture, temperature changes, serve for a long time.
Manufacturers offer universal white polyurethane corners, they are best suited for painting. There are profiles, the texture of which skillfully imitates wood. Products look beautiful, in which the smooth part is painted, and the upper ornament is decorated in gold. Such corners are ideal for classic interiors. They are attached to a special adhesive composition. For these purposes, you can also use liquid nails.
Colored plastic
Such products have a smooth, even surface. They are made from polyvinyl chloride. Manufacturers produce collections in which products of thirty shades are presented. There are profiles among them that imitate the surface of wood, metal. Their scope is not limited by physical parameters, so the plastic profile is used quite widely. For the design of arches, flexible corners and arched products are produced.
A plastic profile is mounted on a plastered wall simply:
- Glue is applied to the surface of the inner part of the profile with a dotted line at a distance of 30 cm.
- The profile is then applied to the surface of the arch or straight end.
- From above, the corner is fixed with molar tape.
In order to glue plastic to the surface of the wallpaper, it is important to make sure that the canvas “sits” firmly on the surface of the walls, that the glue under them has dried well and provided a reliable adhesion. Otherwise, under the weight of the ceiling, the wallpaper will fall off and hang. It is better to glue the corners a few days after wallpapering.
Video description
The video shows how to glue plastic decorative corners:
MDF
This material is also used for the manufacture of a decorative profile. In the process of its creation, two strips of the same size are fastened together with an adhesive film. It is applied from the front. Its color and pattern matches the color and pattern of MDF. Such products can be used both for decorating external corners, and for framing internal ones. The degree of the angle is not important.
Note! Corners made of MDF are undesirable to use in the interiors of rooms with high humidity.
In this way, the corners of the walls sheathed with MDF panels are formed. Source www.meister.com
Choosing a Corner Design
In order for the decoration of the room to be in harmony with its content, it is important to take into account various factors when choosing a profile. It is important to pay attention:
- on surface materials. If the walls are lined with clapboard, the ends covered with a white plastic profile will look ridiculous.
- On the color of the finish. A red profile will spoil the overall impression if the room is made in pastel colors.
- For styling. The metal profile is not well suited for interiors in a classic style, but it is able to emphasize the high-tech concept.
- On the function of the room. A plastic profile is ideal for kitchens and baths; silicone corners are better for children's rooms. Wooden with chamfers will be appropriate for the design of cabinets.
If the choice falls on wooden corners, designers are advised to match the colors and textures of doors or floor finishes. Then it will look organic. If you want to save money, you can buy wood-like plastic corners.
When creating laconic interiors with a minimalist style, the choice of metal corners becomes justified. They look good in hi-tech, in a loft. The width of the shelf must be chosen such that it completely covers the end of the corner. You need to pay attention to this if the walls are covered with panels, drywall, if additional insulation and soundproofing are performed. For such structures, the edges always turn out to be uneven, the decorative corner covers all defects well.
Typically, the angle between the slope and the wall is greater than 90 degrees. In order for the selected profile to be able to lie well on it, it must be slightly bent. You can do this with both metal and plastic corners. To do this, experts advise putting the product on a flat surface with one edge, and then slightly press on top with your hands and push it along the entire length of the corner with a brush. In the cold season, such a procedure should be done after the product has been in the room for a day and the room temperature has been taken.
Video description
The video tells how a metal corner profile is installed on a ceramic tile:
Briefly about the main
Decorative corners help to solve many problems. They improve the aesthetics of the finish, protect the ends of the walls and their inner corners from mechanical damage. The products are inexpensive, it is very easy to mount them, so if necessary, you can experiment and try to improve the design of an already finished interior.