home

How to make a stand with your own hands - a step-by-step algorithm of actions (61 photos). Making an information stand with your own hands Do-it-yourself street information stand

Anna Svetlichnaya

Dear colleagues!

In connection with the introduction of the Federal State Educational Standard, the task educator organize work with parents, one of the forms of which is information corners. I want to bring to your attention stand making master class"Nobody is forgotten, nothing is forgotten!"

First, we need to develop a layout. I did it in PowerPoint

To work we need...

Width of our stand 1 meter, i.e. 2 tiles.

Since the layout is 4 wavy stripes, then 1 template is suitable for both the concave and the convex part, only upside down.

Apply the template to tiles, circle with a pencil.

top cut tiles

and apply to the bottom of the part, combine, so that the cut coincides, and when we assemble booth I didn't have to tweak the details.

We turn the part over, circle it and cut it out from another tiles, then the details will match.

Details are best immediately numbered on the reverse side. Thus, 4 strips are cut, each of which consists of 2 parts.

For painting, mix color with PVA glue, achieving the desired shade. We color the parts according to the numbering, not forgetting to paint over the edges.

Name booth typing on a computer, making templates, tracing and cutting out tiles.

We also need flowers. We make a template.

We will have flowers voluminous. To do this, we will have to cut the template several times.

First, cut off the cup from the flower. We circle on tile received parts.

Then we cut the cup into 2 parts, circle the smaller one, cut it out.

We cut off the upper part from the flower template, circle the resulting part on tiles.

We cut off another part of the template and circle the very bottom of the flower on tiles.

It turns out bulk flower.

Now let's paint all the details with the desired color. When the paint is dry glue it together "The Dragon". Details of flowers are glued together on the reverse side with scraps tiles.

More for making booth we need the Eternal Flame. In our case, the picture is cut out, glued with a pencil glue and laminated with adhesive tape. Cut out with a clerical knife, retreating from the edge of the picture a couple of mm.

Now we will deal with the pockets that are needed to place information. They can be made from: files, corners, folders, or you can buy ready-made ones. We will make pockets from folders. The folder needs to be cut.

With the help of self-adhesive paper, we make a frame. Glue double sided tape on the reverse side.

Now let's collect our stand. Parts are fastened together on the reverse side with scraps tiles and glue"The Dragon".Then we place our details on it: pockets, flowers, letters and Eternal Flame. Fill in the pockets with information.

The main task of the information stand is to familiarize the broad masses of people with any information. At the enterprise, these can be orders and instructions, in the store - information for customers, and at school - the schedule of subjects. Depending on how much information will be on the stand, its size is determined. In order for the stand to organically fit into your ad corner, you need to choose the right stand on the site http://vs-smol.ru/stendy-tablichki.htm. If you have the opportunity and desire, you can make it yourself and our material will help you with this.

Necessary materials

Everything you need for manufacturing can be found in the office and at home after the next repair:

plywood;
PVC sheet of the color you need;
plexiglass or polyethylene film up to 1 mm thick;
any adhesive suitable for PVC and plastic;
metal ruler;
simple pencil;
hacksaw for metal.

Base manufacturing process

First of all, it is necessary to determine the size of the booth to be made. So that it does not turn out too small or too large, think about what information you want to place on it and how to make the best use of this space. For a small company, a stand with 4-6 A4 sheets arranged in two rows may well be enough. Between the sheets, for a more aesthetic appearance and better perception of information, it is necessary to leave a gap of 20 - 30 mm. Don't forget about the header of the information stand, which will "call" people. For it, on top of the sheet, it is necessary to leave a space about 100 mm wide.

When the dimensions are determined, you can start marking with a metal ruler. As a base for the stand, we use a sheet of plywood or plastic. When marking, do not forget about the corners. Rectangularity is controlled using a square or by measuring diagonals, the distance between which should have the same size. After making sure that the markup is correct, we cut out the base along the intended contour.

The resulting workpiece must be given an aesthetic appearance. To do this, paint it in any suitable color. The use of plastic in this regard is more profitable - it already has a factory color, and you can save time on this procedure.

Making pockets

The pocket is the main part of the stand, where the information itself will be located. There are several options for making pockets for the stand.

The most inexpensive and common is the use of an ordinary clerical file for documents. Using glue or double-sided tape, it is glued to the base and the insert pocket is ready.

But if you want your information stand to have a more presentable look, then you need to put in a little effort. We will use transparent plexiglass as the material. On the sheet we apply the contour of the pocket, which should be 10 - 15 mm larger than the standard A4 sheet and cut it out with a hacksaw. For ease of insertion and removal of paper, we cut off the corner of the pocket on one side.

From the same plastic we cut out strips of a length equal to the size of the pocket and a width of 5 mm. We glue them along the edges of the pocket, except for the upper side, and then, at the marked places, to the stand. These strips will allow you to lift the plexiglass.

In the same way, pockets can be made of polyethylene film with a thickness of 0.7-1 mm, only fastening to the stand will be done using double-sided tape.

The heading for the header of the information stand can be made using a stencil or letters cut out of colored plastic. You can also use the services of large format printing. Remember that the headline is the visiting card of the stand, and the more imagination you show, the more attractive your stand will look.

That's all - the information stand is ready, it remains to find a suitable place for it.

Instruction

It is most convenient to use information stands with a soft surface, to which sheets with announcements are attached. Stands with A4 plastic pockets are a thing of the past. Not always the information that needs to be made public is placed on sheets of standard size.

The stand must have a name. It is located in the center, closer to the top edge. You can use the standard: "Company news", "Today in the company", "Information". Or come up with your own name that reflects the scope of the organization.

Divide the stand into two halves. On the one hand, there will be daily work matters. On the other hand, holidays, congratulations and other news not related to the main work.

Then information headings are attached to the stand: “Congratulations”, “Vacations”, “Best Employees”, etc. All news that is updated daily should be displayed in these titles.

If you need to post something very important, attach the title "Urgent". It is highlighted in red font and large letters.

When designing a stand, try to bypass bureaucratic expressions. Write texts in simple, accessible language. Make sure that all employees, from the cleaning lady to the CEO, understand the content.

Make holiday greetings with colorful pencils or beautiful postcards. Come up with wishes yourself, from the heart, without turning to the Internet for help. The creations that are posted on sites dedicated to congratulations often leave much to be desired.

In this article, we will cover the topic of how to make a stand for the school with your own hands. Now in every school, in any educational institution there are information stands that contain various information - timetables, announcements, information about fire safety, diplomas, certificates, and much, much more. But after all, not all institutions can afford to order an information stand from advertising companies. What to do in this case? There is a solution - you can make stands for the school with your own hands. Do not be afraid, you will not need expensive materials and tools, the main thing is a creative approach, a little patience, time and, possibly, the help of others to generate ideas, and together it is always more fun. When designing stands with your own hands, do not try to follow clear canons, make them standard, because in the modern world they like to look at beautiful pictures and photographs more than read long texts, do not be afraid to add a little creativity, but the main thing is not to overdo it.

Where to begin

Let's look at how to decorate a stand for a school with your own hands, what materials you can use, what you can do and where to start.

The purpose of creating a stand - what information will it carry, what will it be? A school timetable, an information stand with announcements, it can be an honors board with certificates of distinguished students, a colorful stand telling about your institution, or it will be do-it-yourself stands for an elementary school.
Size, shape and location. You need to determine where you want to place the stand, what shape you want to make it and decide on the dimensions based on the data collected.
Materials used. Next, we think over what materials you will “collect” the stand from. It is necessary that the materials are easily accessible, not necessarily expensive, and most importantly, do not harm the health of children and the environment. Basically, they take as a basis a 3-5 mm PVC sheet, which can be purchased at any hardware store without any problems, if desired, you can use a cork sheet, chipboard, polypropylene, etc. For filling, you will need paints, glue, paper, stickers, cut-out or printed pictures, a self-adhesive film with an image, wallpaper will do, in general, whatever your heart desires.
The most creative stage is the assembly of all parts into a single stand. It is advisable at the very beginning, when ideas were generated, to make an approximate sketch of the finished stand, so that at this stage it would be easier and faster to assemble.

Do-it-yourself information stands for the school

Now I will tell you how to make a do-it-yourself stand for a school in an original way and how to make a do-it-yourself stand for a school at no great cost. Let's call our booth "The best moments in the life of the school." We take a 3 mm PVC sheet as a basis, this is a very light material that holds its shape well, is convenient when working with acrylic paints, can be cut with an ordinary stationery knife, and is not at all harmful to people and the environment. To fill the stand, you will need photos from various events in which students or teachers of the school participated, acrylic paints, a regular dishwashing sponge for applying paint, color self-adhesive film, photo corners that are used in photo albums. PVC cut out in the form of a large tablet, such as Ipad. We paint the base with acrylic using a sponge, so the paint lays down better and an unusual texture is obtained. We insert photos into the corners, imitating the icons on the tablet, the captions under the photos can be printed on a regular printer to fit the photo. Cut thin strips from self-adhesive film and stick around the photo to visually highlight them. The name of the stand can be made from three-dimensional letters cut out of PVC remnants, made from self-adhesive or colored paper, or simply bought ready-made letters. That's all, you can hang on the wall.

Do-it-yourself themed stands for the school

Based on the steps described above on how to make a stand for a school with your own hands, you now understand that it is not at all expensive and anyone can cope with this task without any problems. As mentioned earlier, now the main thing is the visual design, without a lot of text, do not forget to take this into account when creating a stand.

If the design of stands for the school with your own hands is not at all your thing, you do not have time for this and there are no people who can do it, then you can contact us. We will help you in creating an original stand, taking into account your wishes and budget, and we will offer the most optimal exhibition stands.

You can create not only standard information stands and schedule boards, but also various thematic stands. For example, you can create educational stands - about labor protection, environmental protection, warning information stands, about fire safety, about school life, now it is very fashionable to make infographics and there are a lot of other topics that can be displayed on the stand. You can involve school students in the creation of the stand, for sure it will captivate and unite them.

Children are indefatigable dreamers, and their activities can endlessly touch and delight adults. When the results of creativity are in a clearly visible specially designated place, young fidgets are delighted.

Exhibition board equipment is not always associated with large cash outlays. Any interested parent is able to make children's stands with their own hands.

How to choose the right material

Among the large assortment of modern stands, more and more consumers opt for cork boards. They are easy to use, reliable, durable, affordable.

Natural material - cork oak bark - meets the general safety requirements for children's products and has a number of positive qualities:

ecologicaly clean;
easy to clean, does not attract dust;
moisture resistant;
refractory;
chemical resistant;
not damaged by fungus, insects;
not electrified;
shockproof;
wear-resistant.

Cork stands will be a win-win option for both home and kindergarten.

How to make a stand

You do not need to have special craft skills and knowledge to please yourself and your children with a functional novelty in the house.

Think in advance how to harmoniously fit the new stand into the interior.

You can experiment both with the color of the board itself - paint it or upholster it with a fabric of the desired color, and with the frame, choosing the best combination.

The frame is usually made of wood, plastic, metal profile. It is also advised to use cable channels, the width of which is slightly greater than the thickness of the board.

Choose the type of wall mount for the stand: non-removable version with glue or free hanging on hinges.

The minimum set of blanks and tools used, 30 minutes of work - and the result will be on the wall.

Determine the desired dimensions of the stand, prepare a cork sheet to fit.

Choose the material for the back wall - plywood, fiberboard.

Glue both sheets. Glue - liquid nails, you can use another. Degrease the surface first, after applying the glue, press the parts tightly against each other. If desired, cover the working surface of the stand with a cloth.

Attach the previously prepared frame to the base. If desired, attach loops for fastening on the reverse side.

Fix the stand to the wall with glue or double-sided tape for a non-removable option. For an alternative method - hang on loops.

How to rationally use the stand

After you have made a stand with your own hands, you can begin to actively exploit it.

Note!

There are two main formatting methods. You can fix pockets on the surface of the board. These can be files for papers, or transparent pieces of thin plexiglass, fixed on double-sided tape.

This type of design is used for information stands.

Sheets of paper are placed in the pockets with important information that parents should know about the working hours, routine, rules of behavior for children in kindergarten.

The information can be updated daily (food menu) or as needed.

Stands are actively used by people of different ages both at work and at home. Reminders of important events, planning for the near future, pleasant memories captured in photographs, visualization of your desires, a convenient organizer - everyone will independently add the most relevant for themselves to the list of useful functions.

On display stands made of cork, the necessary items - photographs, pictures, paper notes, small souvenirs are fastened with buttons, pins, tailor's needles.

Note!

The surface of the board does not suffer from this, there are no holes visible to the eye. When designing a stand for children, you need to make sure that sharp objects cannot harm the kids.

The stand, on which educators attach the results of children's work for the day, is always popular with caring parents. And the children are happy to present new crafts and arrange mini-exhibitions already in the apartment.