Projects of panel houses with an attic. What you need to know before designing a house

Construction cost frame houses with an attic in an individual suburban construction favorably differs today from the construction of private houses using other technologies. For this reason, projects of frame houses with an attic are popular among developers in 2017. But in order for a house built using this technology to be both of high quality and comfortable, it is necessary to approach the issue of its implementation scrupulously, starting from the very beginning - at the design stage.

Today he is building a residential building, not having a project, not the most the best solution. This is especially true for construction frame cottages. To build durable, high quality and warm house, it is necessary to buy projects of attic frame houses.

Plans for attic frame houses: features

Finished projects of attic frame houses (photos, drawings, sketches, videos, diagrams can be viewed on the website) have significant differences from projects of houses made from traditional building materials. The main difference panel houses is the pie walls. Houses made of timber, aerated concrete, brick, and other stone materials are characterized by a homogeneous wall structure. The walls of frame houses can have the following sandwich options:

• Frame made of wood or metal;
• Internal and external lining;
• Insulation filling the frame (polystyrene foam, mineral wool or other non-traditional heaters);
• Additional insulation from the outside.

The frame of a new house is a system of racks, beams and other load-bearing elements roof structure and overlays.

Projects of panel houses with an attic display the following data:

• The dimensions of all elements of the frame structure, calculated based on the loads of the cottage (the pitch of the racks, the section of the beams, etc.).
• Competently calculated thickness of the external and filling insulation. Accurate miscalculations make it possible not to lay layers of insulation that will be superfluous, thereby not increasing the estimate of construction costs. Picked up optimum thickness, at which there will be low heating costs in winter. Parameters included in the project panel house with an attic - this is the result of thermal calculations.
• foundation parameters. Plan frame house with an attic takes into account the lighter weight of the building, which makes the price of a frame house lower without compromising quality.

The layout of projects of attic frame Z500 is functional and comfortable!

Project plans for attic frame houses: company additions

Developers, before starting the construction of a turnkey house according to a standard project, must perform geological surveys. This will make it possible to verify whether the foundation of the project is suitable for implementation on the developer's site or whether it needs to be adapted. You can read about the importance of adapting the foundation.

If the developer wants to build a really good and reliable frame house, then it is important to purchase projects specially adapted for this technology.

The projects presented in the Z500 catalog are adapted to a wooden frame with mineral wool insulation. The layout of mansard frame houses can be adjusted at the request of the customer.

In addition to the project, the company offers its clients a range of services to improve future home. This is how original attic frame houses can be created, the layout is changed, adjustments of any complexity are made. You can also order the creation of an author's project. The full list of add-ons is listed here.

When ordering projects of frame houses with an attic at Z500, customers are issued project documentation, which includes 5 parts: a constructive section (parameters of floors, foundations, roofs, etc.), architectural (geometry parameters), 3 sections of engineering (power supply, ventilation and heating , sewerage and water supply).

All projects of cottages are protected by copyright, which guarantees legal security for customers during the construction of houses. Evidence that Z500 is a representative of the international architectural bureau Z500 is a certificate posted on the website.

Enjoy watching and we wish you to choose architectural project to build your own home!

Frame house with attic perfect solution, which does not require high costs. It is built quite quickly and is not complicated in its structure. Therefore, in recent times this species buildings are popular.

Features of the construction of a frame house with an attic

It is better to build a frame house in order to save money with an attic. Why?

1. For a full-fledged family, a bungalow (house on the 1st floor) will require large area to accommodate.
2. The heated air from the lower floor will rise up, heating the room and the floor. Gas costs will go down.
3. Many projects for placing rooms, there are ready-made templates. Often the attic is built for bedrooms and children's rooms, on the ground floor there are: a kitchen, a bathroom, a living room and an entrance hall.
4. You can build this dwelling yourself - construction does not require much time and a lot of experience. Therefore, labor costs are not needed.
5. Rebuilding the attic, heavy equipment is not needed.
6. Special preparation is not needed and the soil. You can build a house on almost any surface.
7. Even with the top floor, the building is not very heavy - any foundation can withstand it.

Flaws:

1. This offer is suitable for young families. The stairs will be a burden for the disabled and the elderly. In this case, a simple option with an attic is suitable.
2. It is worth considering the stairs - sometimes, it takes up a large space.
3. Some people can't sleep when the rain hits the roof.

About other advantages of frame houses:

• Engineering and installation work run through the wall.
• High thermal insulation.
• Good weather resistance.
• Can be used as temporary and permanent housing.
• Long service life.
• There is no shrinkage, which means you can perform internal work immediately after construction.
• A huge range of exterior design and decoration.

How to build a frame house with an attic?

1. We install the foundation. Pile-screw, has the same properties as the frame. Its cost is low, the range of piles is large, and installation does not take much time. When choosing piles for a house, take a large diameter - 108. When installing a foundation for a terrace - 76 diameter.
You can lay the foundation at any time of the year, but if there is a lot of clay on the site, choose a dry day. After level the ground and work with the level.
Reinforcement bars up to 50 cm are stuck around the perimeter of the proposed building. A rope is pulled over them. Screw piles into the ground at the corners. Approximate intermediate space 70-120 cm.
Piles should be of the same level as those above - cut.

2. For waterproofing- smear the supports with mastic, apply 2 layers of roofing material.

3. Tying. The bars smeared with an antiseptic are laid on the base of the piles and fixed with 12 cm nails. metal corners fixed with 6 cm nails. After laying the bars in special phases, they are screwed with fixing screws.
The boards treated with an antiseptic solution should be fixed with nails 12 cm in places of bar joints.

4. Gender(draft). Logs are attached to the harness (beam 150x100mm, in increments of 60 cm.) Special corners also provide fastening. The space between the lags is filled with insulation, and a vapor barrier film is laid on top. Plywood is installed on top around the perimeter.

5. Frame installation. It is carried out from boards 1-2 m., x50mm. Reinforced steel corners are fixed corner posts. Next, intermediate racks are mounted on the corners. On them, jibs are alternately installed (a support standing in an inclined position).

6. Top harness - performed similarly to the bottom, fixed in the corners with self-tapping screws. In other places, cutting and steel corners are used.

7. Ceiling beams. Before work, you should choose more convenient option installation: perforated brackets, cutting method or greasy corners. Beam support - strapping bars. Fastening takes place with self-tapping screws.

8. Roofing- attic. There are 2 types: 2 stingrays + 2 small stingrays or 4 identical stingrays. The attic will provide a low level of load in winter time. The slope of the slopes is usually 30-45 degrees.

Tip: the greater the slope, the less the load on the house.

By using construction tables is chosen rafter section. The top is covered with one of the types roofing materials:

- Decking.
- Ondulin or slate.
With the help of construction tables, the rafter section is selected.
- Tiling: bituminous, ceramic, polymer-sand and metal tiles.

9. Lathing and counter lathing. The size and step of the crate is selected according to the table:

Remember: the step must match the step of the rafters.

10. Roof installation. Getting Started - Installation truss system. Rafters (bar 50 by 200 or 50 by 150mm). The boards are overlapped by 90 degrees. Fixation occurs with a nail at the top. The edges of the boards are installed on well-fixed ceiling beams. The boards should extend beyond the edges of the eaves by 50 cm. This will provide a drain. Fix desired angle the slope of the slopes is necessary for the transverse crossbar. It is placed between the rafter "legs". Along the edges will lie 2 more pairs of rafters. It is better to join them with thick bolts.
To raise the rafters to the roof, it is necessary to mount a thrust beam from below. To maintain the desired level, 2 side rafters are covered with a rope. A step is measured between the rafters (60 or 80 mm). After fixing all the rafters, 2 fixing boards are driven in between the trusses.

11. inner side rafter legs beat vapor barrier film. The work is carried out with a stapler and 2-sided tape, which is wound around the joints. Lay insulation between the bars, and a diffusion membrane on top.
In a checkerboard pattern, install the counter crate and the crate itself on top. Fasten with long nails (3 times the thickness of the timber). We complete the roof with tiles or other materials presented above.

12. Exterior finish – siding, stone and the like similar materials. A crate is created with bars 40x50 and with a step of 60cm. It must be treated with a refractory substance, an antiseptic.

13. Interior decoration. Put insulation in the cells, fixed with a vapor barrier film. Then inner surface upholstered with boards and creeping on it necessary materials- tiles, wallpaper, etc.

The most popular sizes of frame houses with an attic

The most popular size among frame houses with an attic is 6x6. This layout is inexpensive, no frills and has enough space for small families and young couples. The smallest and most unpretentious house is considered to be 4x6. From large layouts Basically, templates are created for building 9 by 9.

Frame house 4x6 with an attic

A 4x6 frame house is suitable for temporary residence of 1-2 people. The area of ​​the occupied place is 32 sq.m. If we take into account the subdivision of the lower floor by 2 large rooms dimensions 3 by 4, and the space under the attic is not divided, then its cost will be about 250 thousand rubles without. Turnkey house price increases to 300-350 thousand rubles.

The attic has a slope, so the area of ​​​​the second floor will be 4.5 by 4 meters. If you add partitions to this housing, you get a good suburban option. Construction will take 2-3 days.

Frame house 5x6 with an attic

The best country option, suitable for a small family vacation - frame building 5x6. The total area is 54.6 sq.m. The standard layout of the 1st floor is 2 rooms of 15 sq.m., the 2nd floor is a room of 18 sq.m. a kitchen and a room with a staircase are planned below, a bedroom above.

Such a turnkey layout will cost 450 thousand. rub.

The price includes a support-columnar foundation, 100 mm thick insulation, subfloor, ceiling insulation, windows and doors.

Frame house 6x4 with an attic

A 6x4 frame house is suitable for seasonal and permanent residence family with two children. Area - 38 sq.m. Standard layout of the 1st floor: kitchen and hall (11 sq.m. each), 2nd bedroom 16 sq.m.

Turnkey housing price from 280 thousand rubles.

Included: the walls are sheathed with clapboard, without insulation, the foundation is piled, the floor is rough flooring, stairs, porch and waterproofing with roofing material. More high quality estimated at 400 thousand. and higher.

Frame house 6x6 with an attic

House from a frame with dimensions 6x6, with with total area 72 sq. meters is suitable for permanent residence of small families. The basic package includes: lining, installation of wind and waterproofing, wooden windows and doors.

The price of this type is 320,000 rubles. If you take into account the foundation, pillars for a terrace or porch and insulation, then the cost will be from 380 thousand + additional services.

The area of ​​both floors is 36 sq.m. The layout includes: an entrance hall, a bathroom, a kitchen, a living room on the ground floor and a hall, a dressing room, 2 bedrooms on the second floor. Construction time is approximately 6 days.

Frame house 6x9 with an attic

Frame house 6 by 9, suitable for living with relatives and large families. Living area 94 m.2. Turnkey construction will take 25-30 days. Layout of the 1st floor: kitchen and bedroom, hall, bathroom, living room. Under the attic are 2 bedrooms and a hall.

With a wall thickness of 100mm, the house will be 610 thousand, and with a thickness of 150mm - 675 thousand.

Frame house 7x9 with an attic

Frame house 7 by 9 - comfortable for large families. The lower floor can be divided into large rooms: a kitchen, a nursery, a hall, a living room, a bathroom, a hall and a terrace. Sometimes instead big room attached veranda. The top floor has 4 equally sized bedrooms, a hall and a dressing room.

The price of construction is 740 thousand rubles, without additional services.

The cost of a complete turnkey kit is 900-1300 thousand. Construction time from 3 weeks.

Frame house 8x8 with an attic

An 8x8 house is already more than a substantial size for a family to live. Optimal layout on the first floor there is a bathroom, a hall with a staircase, a spacious living and dining room, a fireplace room and an entrance hall. On the second floor, most projects involve: a corridor, a pantry, a bathroom, 2 bedrooms and a hall. The total area of ​​the premises is 128 sq.m.

Such a project without a foundation is estimated at 600 thousand, with a foundation at 670 thousand.

Additional services are paid separately.

Frame house 9x9 with an attic

Housing 9x9. Prices vary greatly due to the complexity of the layout. The occupied footage is 162 sq.m. In addition to accommodating the main rooms, there is plenty of space for additional ones. You can make a cinema room, winter Garden, living corner, fitness room and much more. Based on standard drawings, without a veranda and a terrace, on the ground floor there are: a kitchen, a dining room, a living room, a bath, a boiler room and a bedroom. Floor No. 2 in addition to the hall will accommodate: a bathroom and 3-4 large bedrooms. All rooms are very large, so you can order a project with additional rooms: fitness room, winter garden, office, etc.

The price of construction is from 1,100,000 rubles, if you take into account all services, cladding, insulation and foundation, then about 1,900,000 rubles.

How to calculate the cost of a frame house with an attic

For the correct calculation of funds, include in the amount finished house turnkey at least 30% of its value for interior decoration. Consider additional costs for shipping, materials and services rendered. If the house is large, additional heating may be needed. Water heater, boiler room, stove, floor heating, etc. will be very expensive, so the stock of funds should not be small.

It is better to entrust the creation of the project to designers, indicating their own wishes. The price of a frame house depends not only on its size, but also on the thickness of the walls, the foundation, the cost of roofing and external coating.

Starting construction yourself, you need to make a list of materials and tools. You can not do without an approximate list of expenses.

Tip: consider the conduct of communications: plumbing, electricity, gas, sewerage, they can cost more than the building itself.

The boards that are used to make inner lining. If you are sure that you have not forgotten anything, then a frame housing with only two or three workers is being built in 2-6 months.

Frame house with attic. Price. Popular sizes

, 9 by 9

The Russian Building company accepts orders for the construction of frame houses with an attic. We offer services to residents of the Central and North-Western regions of Russia. On the pages of the site you will find projects of frame houses with an attic of different sizes, different layouts.

Features of cottages with an attic

Attic - an attic-type room. It is the living quarters of the cottage, it houses separate room. The presence of an attic in the house allows you to increase the useful area of ​​\u200b\u200bthe building. In addition, this room is always warm. It does not need to be further insulated. It is quite enough insulating materials that are laid on the roof.

Another feature of the room - the attic floor has sloping walls, as it is located directly under the roof. It gives original look room, which can be interesting to beat in the interior. Rooftop installation possible skylights. This will increase the amount of light in the room.

Advantages of the attic

• it will increase living space cottage;
• the cost of building an attic is lower than a full-fledged second floor;
• slight load on the foundation of the building. The frame house exerts a small load on the base prepared for it. The attic in such a house also has a small weight;
• if in houses with an ordinary attic there may be a problem with roof icing, then in cottages with an attic there are no such problems. The roof structures of the building do not accumulate condensate.

Stages of building a frame house with an attic

• foundation installation;
• installation of the frame of the cottage, erection of walls;
• conducting roofing works;
• installation of thermal insulation (the walls of the main floors are insulated, attic space);
• summing up engineering communications to the cottage
• execution of finishing works.

Advantages of the company "Russian Building"

The company is professionally engaged in the construction of houses according to frame technology. The catalog of projects presents a wide selection of layout options for cottages with an attic. It contains projects of buildings of different area, number of storeys, with different forms roofs and various interior layouts.

If you want to build a warm and comfortable frame house with an attic in the country or for permanent residence, the Russian Building Company will make your dream come true.

A frame house with an attic is an excellent housing option that can be quickly built from scratch without spending a lot of money.

The “homeland” of such a house is Canada, but in last years and we have a frame house with an attic enjoys unprecedented popularity.

A brick house is being built for a rather long time, and the construction of panel structures for the frame does not take much time, so often such country houses serve as temporary housing.

However, now technology has stepped so far that frame dwellings are quite affordable for permanent, long-term residence and brick house in this regard, it can even lose.

Moreover, there are various projects, according to which it is realistic to build a house with a veranda and an attic with your own hands, even if you are far from the construction business.

Many countries have their own projects and technologies for building a frame house, especially with an attic.

They include Canadian technology, German, based on panel structures, frame-frame technology.

And in our latitudes, they take a little bit from each to get the best result.

A two-story frame house with a built attic is a light, simple structure, but not inferior to ordinary dwellings in strength.

Since the projects are presented in large numbers, you can choose correct layout, which will provide protection from cold, leakage and moisture, as well as save on materials.

If the family is large or you just need more space, then a two-story frame house will do. Furthermore, old house it is not necessary to write it off - you can attach a frame attic to it with your own hands.

How to lay the foundation for a frame house?

Any house (including a two-story one) starts from the ground, whether it is with an attic or conventional roof. Whatever construction projects you choose, the foundation must be given special attention.

The peculiarity of the frame house is that due to its lightness, the foundation device can also be made of fairly light materials.

The main types suitable for a frame house equipped with an attic: tape shallow and columnar.

Most often, the construction of a frame house and an attic involves the use of the first option.

It is also easier to do if the work is done by hand.

For such a foundation, they dig a trench, the depth of which does not exceed seventy centimeters. For non-flowing soils, projects allow choosing a recess of half a meter.

After that, we need to compact the soil - make a pillow of sand, gravel and roofing material with our own hands or with the help of a master.

The pillow should be at least thirty centimeters wider than the foundation itself.

After that, you can proceed to reinforcement - we select five bars for the lower and upper belts. And only at the last stage we fill the resulting structure with concrete.

The construction of such a foundation will allow a frame house with an equipped attic to last a long time and in any weather.

How to build walls?

Projects involving the construction of an attic and a frame house are always based on the correct construction of walls - this is a key stage of work, both with the services of a master and with a do-it-yourself construction.

Even with independent work, projects exist in a huge number and any complexity, so it will be easy to figure them out. You can also create own projects houses, for example with a veranda.

Moreover, if you already have an old house, and you want to add space to it with an attic or veranda, then you can purchase finished frame under these buildings, which has detailed instructions.

But they should be attached with great attention, because cracks can form at the junction.

Even if you want to do everything yourself, it will not be superfluous to just consult with a specialist.

Even if the projects are supposed to be summer cottages, they do not differ much from the standard ones.

More experienced people can draw up projects themselves, based on the number building materials and squares to put them to good use and build comfortable housing.

Often they choose standard plans for frame-frame houses with an attic, because they do not need to involve special equipment.

The frame itself is made from glued layers of timber, and sheathed on top with any materials, such as boards, OSB.

In order to build walls for a frame house of this type(with an attic), we will need the beams for the frame themselves, fastening systems, boards (if the wall cladding is carried out by them), polyurethane foam, roofing material as a waterproofing of surfaces.

To understand what length we need vertical racks, it is necessary to calculate the total length of each wall.

The racks themselves must be mounted every half a meter, but where window openings will be made, a greater distance is assumed.

The construction of a frame house, which is equipped with an attic, requires choosing a board with a thickness of at least thirty millimeters.

And its width is selected from one hundred and fifty millimeters.

Of course, if this is your first time building with your own hands, then you should know that the boards are selected by yourself. best quality, without rot, which were stored under normal conditions without moisture.

Otherwise, they may dry out or split.

Additionally, the walls of a frame house can be insulated, there are a great many materials for this: polystyrene foam, mineral wool, organic heaters.

Before building walls, you need to put a layer waterproofing material- ruberoid. We put it between the foundation and the walls.

The bars themselves are connected by sawing at the ends, the width here is equal to the width of the bar itself.

To prevent the device from disintegrating and deforming, special dowels are additionally driven in at the docking point.

This approach is relevant for corner buildings, and for wall connections, and for lintels.

The installation itself is quite simple - the main thing is to hammer the pins tightly and efficiently, at regular intervals.

As a result, we will get a bare frame, which will be sheathed with boards (the exception is pre-designed openings for windows and doors).

Why is it important to insulate walls?

By itself, a frame house, and even if it has an attic or other insufficiently insulated extension, is a bare structure made of boards and beams.

It is clear that already with the onset of the first cold weather in such a dwelling it will be cold and uncomfortable. In addition, do not forget about moisture entering the house along with rain and snow.

Such housing will constantly leak, and drafts here will become commonplace.

To avoid all these negative consequences, it is enough to include in the work the construction of an insulating layer.

Today there are a huge number thermal insulation materials– Affordable and easy to install.

Organic materials are not the most popular, because they often mean straw, clay, peat.

All organic heaters are unhygienic, insects and mice can start in them, they quickly become damp.

The most popular heaters for a frame house are mineral wool and polystyrene foam. Mounting sheets of such material is very simple - they are laid in a frame, cut to size between the racks.

They are fastened with special glue or with dowels (nails with wide caps).

Before installation, a layer of waterproofing is laid from the film to collect condensate and excess liquid.

In the end, they can be reinforced for strength - an aluminum mesh is pressed into the plaster, which is then covered with another layer of plaster.

Such a device will firmly support the structure from deformation.

How to make an attic in a frame house?

In order for the attic to be habitable, high-quality thermal insulation is necessary.

If the attic is attached to an old house, then it is important to calculate all the loads assigned, otherwise the old walls simply will not be able to cope with the new structure.

There are a huge number of roofs under the attic: symmetrical, asymmetrical, triangular.

Such a variety is beneficial, especially if you do the construction yourself, because each design provides for a different complexity of work.

The attic frame is laid on wooden beams with a layer of waterproofing (roofing material). We install racks on the laid beams, which have a section of 10 by 10 centimeters.

If this is your first time working with your own hands, then it is better to make a markup where the distance between the racks will be approximately two meters.

These racks are the basis of our attic. From all sides they are upholstered with finishing material.

After that, you can mount the upper beam (also a section of 10 by 10) using nails and special brackets.

It is important to ensure that all racks remain vertical and do not deform during work - for this, a plumb line and a level are used.

When the top beam is installed, we can assume that the device of the sub-rafter frame is completed.

With such a device, the coating will not tip over from gusts of wind or snow. Mauerlat will require boards (their thickness is at least fifty millimeters). They are mounted on the walls horizontally.

Just do not forget to also put a layer of waterproofing under the board so that liquids do not accumulate in the attic.

Frame houses have long occupied their own niche in housing construction. On the this moment time, more than half of all suburban households are environmentally friendly wooden buildings with a solid frame.

Specialists involved in the design and subsequent construction of frame-panel residential buildings consider the construction of a private house with a garage the most optimal and cost-effective option.

Distinctive features of the attic

Arrangement broken roof has long been a matter of great controversy, there are many supporters and opponents of the construction of the attic. Projects of frame houses with an attic are particularly economical, but at the same time there is a real chance of losing square meters and they are always in short supply.

In addition, the installation of double-glazed windows in the attic will cost much more. But all costs will pay off due to the fact that you do not need to purchase finishing material to decorate the facade of a residential building, a bathhouse with an attic. Additional costs will be required only for the construction of the truss system and the purchase of metal tiles.

Frame house 6x6 m with an attic

Projects stand out for their originality and attractiveness. Attic floor is a free field of activity for designers and decorators. In a room with an unusual architecture, even the bevels of the walls can be turned into a bright element of decor.

Versatility attic space allows you to set up upper floors bedroom, office, gym and even a bathroom.

Specifications

Owners of frame houses 6x9 m with an attic quite often face the problem of poor heat transfer of the erected structure. To cope with this trouble, which causes certain inconveniences, it is necessary, when drafting a frame house with a garage and an attic, to take care of installing high-quality insulation inside and outside the building.

During the arrangement quality warmth and waterproofing a bath with an attic, you need to have a certain skill and clearly follow the established order of all construction works. The result of the mistakes made can be the formation of condensate and the appearance of mold and fungus in the future. In this case, it is better to pre-order projects of frame baths with an attic.

Advice! To significantly increase the heat resistance of a house with a garage and an attic, it is necessary to insulate and decorate external surfaces façade attractive and durable finishing materials. It could be a brick a natural stone or block house.

If the facade insulation was carried out efficiently and in a timely manner, then a 6x6 m frame house will heat up faster and cool down more slowly - maintaining a warm and cozy atmosphere in all rooms.

The need for drafting project documentation

A correctly drawn up project of a frame house 6x8 m with an attic is almost a 100% guarantee that all construction and installation and Finishing work will go strictly according to the plan and in accordance with all regulatory documents.

During work, the architect makes the most accurate drawing of the location of all interior rooms future building. Projects of frame houses 6x9 m with an attic contain approved norms and plans for arranging the foundation and building load-bearing structures, material consumption and all necessary engineering communications.

All finished projects frame houses with an attic can be divided into separate groups according to the size of the area. It is small country house up to 80 sq. m or a luxurious mansion with a total area of ​​more than 300 sq.m. It is most convenient to make project documentation, if there are certain width and length parameters in meters. This may be a frame house project 8x10 m with an attic.

Individual projects

At the moment, enough has been developed a large number of standard projects residential and commercial buildings, there are projects of frame baths with an attic. However, some customers prefer to build a house with a unique and sometimes even original architecture.

These can be elegant mansions in gothic style, frame baths or, conversely, ultra-modern buildings erected using latest developments and technologies. These include built-in automatic system « Smart House". In this case, the task of the designer becomes more complicated.

Creating a project of a frame house 8x10 m with an attic, architects take into account all the wishes of the client: facade decoration, footage interior spaces, insulation, waterproofing, arrangement of heating and water supply systems. If necessary, already at the initial stage of planning, designers are involved in the creation of the project interiors. Such a tandem allows you to create the most accurate and correctly calculated plan.

The photo shows a project of a 6x8 m frame house with an attic.

The cost of a private house with a sloping roof

The final cost of the entire residential building is influenced by several factors:

• type of foundation;
• floor material;
• roof structure;
• facade decoration;
• engineering structures;
• installation of windows and doors;
• interior decoration.

It is necessary to take into account all the costs associated with the construction. This may be the use of construction equipment and the wages of workers.

by the most economical option one-story buildings are considered, and frame baths with an attic. Projects can be very diverse.

A fully equipped house is suitable not only for staying in it during the summer season, but also for permanent residence of a small family.