Wallpaper border: everything a beginner needs to know about choosing and installing. Wallpaper border: a small detail of a big look Vertical decorative wallpaper border

We bring to your attention one of the means of expressiveness of interior design - a decorative border.

A decorative border is the final element of almost any interior. It can be installed at the junction of walls and ceiling, walls and floor, or at any height on the plane of the wall. With its help, you can highlight a doorway, a mirror, a niche - beat any interesting piece of furniture.

With the help of a decorative border, you can beat the doorway.

If you are tired of your usual furniture, you can also decorate it with a decorative border.

If you choose the right decor - you can transform old furniture beyond recognition.

• 1 Overview of materials
  • 1.1 Paper
  • 1.2 Gypsum
  • 1.3 Tree
  • 1.4 Polyurethane
  • 1.5 Styrofoam
• 2 Finishing methods
• 3 Cutting and editing
  • 3.1 Video tutorial on trimming the border
• 4 Decorative wallpaper border

Overview of materials

The material of execution can be any. So, a decorative border happens:

• Paper
• plaster
• polyurethane
• Styrofoam
• Wooden

Each of them has its own characteristics, pros and cons, which we will definitely consider further.

There are many different materials that are used to make borders: wood, plaster, paper, polyurethane, foam.

Paper

Excellent and economical solution compared to everyone else. Can be sold on rolls or as wall stickers. Such a border has only one minus - it is flat, but if you use it correctly in the interior, it will look advantageous.

One of the options for wall stickers.

A decorative border in this design, of course, is good "for all times." Gypsum - environmentally friendly pure material which is very convenient to use even in wet rooms. Gypsum decor always has a fantastic pattern due to the fact that all the nuances of the relief in this particular material are perfectly readable.

This interior uses the most diverse gypsum decor. And, of course, there are several different designs borders on walls and ceilings.

Gypsum lilies with detailed buds and leaves.

Wood

One of the most expensive is a wooden decorative border. The price depends on the cost of the source material and the complexity of the installation, which should be carried out ONLY by specialists using professional tool. Such a decorative border will be appropriate in interiors where the main finishing material is wood.

A wooden decorative border will become an indispensable decor for the corresponding interiors.

Polyurethane

Polyurethane borders and various decorative elements proved to be excellent as a replacement for plain gypsum stucco. They are easy to paint and install. Sturdy enough and almost do not burn.

Polyurethane molding much cheaper than gypsum. It can be used as a substitute for plaster decoration if you want a simple design for such decorations.

Styrofoam

Strengths- Accessibility and easy installation. Cons - very soft material, it is easy to crush and break. Also limited opportunities by decor. The foam border is an excellent solution for economy class repairs.

Styrofoam decorative border can also be painted in any color. Paint, as a rule, hides all the shortcomings of the material and presents it in a more favorable light.

If you are interested in learning more about ceiling plinths in different materials: gypsum, wood, polystyrene, polyurethane - we recommend reading this article.

Finishing methods

A decorative border is not always sold in the exact form that is required in the interior. As a rule, these are blanks, which are then painted in the desired color.

Tip: to paint the border after installation, you must first stick masking tape along the entire border on both sides. Thus, the paint will remain only on the curb, and the ceiling and walls will be clean. However, you can do without tape if you skillfully use a spatula.

Coloring methods can be any: It can be one or more colors with clear boundaries (for example, various ornaments are so often painted). It can be patina, stone-like effect, etc. Here everyone chooses what he likes.

Coloring of ornaments, as a rule, is carried out in 2-5 colors with clear boundaries. However, as you can see in the photo, they can look great with a slight patina effect.

Painted plaster rosette. For a detailed study - click on this photo.

Stucco molding, painted in different colors, will always be spectacular in the interior with high ceilings.

Trimming and editing

The most difficult thing in the installation of a decorative border is the plasticity of the walls: external and internal corners, radius. Decorative border, plinth and fillet ( ceiling plinth) are cut according to the same principle - at an angle of 45 °. Of course, if you have square and rectangular outlines of the premises. If you have a lot of obtuse corners in the interior, circular lines, you will need other values ​​and methods.

Curb trimming schemes for docking on external and inside corners.

To keep it straight and under right angle to saw off a piece of decorative border, you will need a miter box and a hacksaw (a sharp knife will be enough for foam). True, such a set of tools is suitable only for polyurethane and foam moldings.

Take the choice of glue seriously - it must be suitable for the material from which your border is made. Otherwise, you will not have everything to hold normally or in general the material will collapse under the influence of the adhesive composition.

Video tutorial on trimming a border

The question often arises: “When is it right to paint a decorative border: before installation or after?” There is no single correct way here: it can be done both before and after installation. The second method is often used. For example:

Decorative border for wallpaper

In this section, we will talk about a decorative paper border, which is sold together with wallpaper in rolls.

Such a border can be pasted over wallpaper or on a prepared wall. It is glued in small cuts (calculate based on your comfort and dexterity). Just like wallpaper sheets, the border is smeared with glue and with the help of sleight of hand and a magic cloth (or roller) it turns into a perfectly even and beautiful decorative border.

The process of pasting walls with a border is no more difficult than wallpapering.

Want to better understand why wallpaper borders are needed? Name your favorite accessory. Now imagine that you went to the wedding of close friends without him. You feel inadequate. This feeling evokes room interior where there is no exclusivity.

The paper border is a wall decorative element, presented in the form of narrow wallpaper tapes, suitable both for ennobling the interior and for smoothing minor errors.

Have you finally decided to dilute the plain background of your walls with a wallpaper border? Fine. Pick up worthy option not difficult. If the repair is at the stage of purchasing materials, then a consultant from a specialized store (focused on the sale of wallpaper) will help to correctly arrange the necessary details. On the spot, you can browse through the latest catalog and choose exactly the idea that fits perfectly into your apartment.

Don't have enough budget to visit good hardware stores? Do you do all your shopping at the market? Or maybe you question the qualifications of sellers? In any case, do not despair. You can make a decent choice on your own. The following information on wallpaper borders will help you with this. So, let's begin.

Where do experts never glue wallpaper borders?

Wallpaper borders are a versatile decorative finish that can be used in almost any space, from the bedroom to the work office. By the way, recently the line of models was replenished with moisture-resistant curbs that do an excellent job with high humidity. Now they can be glued even in the bathroom. Do not forget that the scope of application of borders is not limited to wall decoration. Check out our design tutorials and you'll be amazed at how skillfully you can transform an old chest of drawers or a mirror with a few narrow wallpaper tapes.

Usually there are two ways of pasting walls with a wallpaper border

• Edging around the ceiling (around the entire perimeter).
• Pasting in the lower third of the wall surface. This option is especially interesting, since its correct implementation can smooth out the difference between the different colors of the selected wallpaper (for example, when a cold tone is pasted at the bottom and a warm tone at the top).

Also gaining popularity is such a variant of the location of the edge, when instead of the usual horizontal it is glued into vertical position. This arrangement allows you to focus on the functional areas of the room or highlight special purpose one area or another.

Because of low-quality repair When wallpaper blanks have been cut incorrectly, the bottom level of the wall may be clumsy and irregular. In this example, well-chosen edging can mask flaws, but it will only look good if they are chosen correctly. Let's consider further how to do it.

Nuances of choice

• All lanes have their own classification, which must be studied as a matter of priority. The fact is that each type of room has its own functionality, and therefore it should be decorated individually.
• It is customary to combine wallpaper strips by color or applied pattern (it is important that the interior is designed in the same style). However, try never to choose colors that would give the room an overly bright, aggressive or vulgar tone.
• The materials chosen for pasting the room must be of the same quality. So, a paper border should be combined with paper wallpaper, etc. Ignoring this rule will quickly affect not only the appearance, but the long-term pasting.

Features of different types of borders

• Paper frame. Differ in that it can be glued and removed without special efforts. Among the shortcomings, one can note instability to mechanical damage (cannot be processed detergents), fragility, and sensitivity to sunlight (burn out).
• Vinyl edging. Great for bathrooms, hallways, and other high-pollution areas. Gluing them and caring for them is easy, since all the disadvantages of paper-type stripes are absent.
• Acrylic edge. It absorbed all the characteristics of vinyl, however, due to the application of an acrylic emulsion to the base, it costs a little less.
• Textile edging. Its peculiarity lies in the dense structure resulting from the adhesion of two layers (fabric and paper).

How to glue a border on wallpaper?

Stock up on supplies and necessary materials. You will need:

• glue, which is selected depending on the type of wallpaper chosen;
• ladder;
• desktop (required for cutting wallpaper and stripes);
• roller;
• brush;
• scissors.

Immediately before gluing, each strip must be checked for defects and flaws. Unfortunately, marriage is quite common.

Pasting algorithm

• Preparing glue. Carefully read the manufacturer's instructions, as some types of mixture are diluted non-standard. As a general rule, the dry mixture is poured into a volumetric vessel with water, slowly mixed and infused for 20 minutes. After that, the composition must be re-mixed until a homogeneous mass (without lumps). If you bought glue mixed with acrylic mass, then you do not need to dilute it with water. Such a mixture can be used immediately, and the brush built into the tube greatly facilitates this process. By the way, it is the acrylic base that provides the perfect fight.

Incorrect preparation of glue in the future may affect decorative features wall covering. Therefore, do not be too lazy to perform this simple action correctly. Otherwise, you will have to re-glue.

• We do calculations. If wallpaper borders are glued only to the wall, you must first measure the length and width of the room, and then multiply the resulting value by 2. Such a simple action will allow you to correctly calculate required amount blanks.
• We cut the borders and slightly moisten them with water.. Everything is simple here, the main thing is to strictly adhere to the markup.
• We prepare the surface. In order for the strips to be glued evenly, the walls must first be cleaned of dust. This is done with a brush.

The drier the base, the more secure the curb will hold. So be sure to wait until it dries completely. wallpaper.

• The blanks are treated with glue and left alone for 5-10 minutes.
• We glue the borders in the intended area. Special attention pay attention to the corners. Traditionally, it is in them that the most difficulties arise.
• When the whole room is processed, go around the perimeter and check again that there are no drops of glue left on the surface. Remove if necessary.
• Let the borders dry.
• If the material used is created on a self-adhesive basis, then before large-scale pasting it must be tested on small plot. To increase the level of coupling, you can additionally treat the strips with glue.

Now consider the main parameters by which the wallpaper edge is selected.

What to look for when choosing a frame?

• The style of the interior and the selected wallpaper (combination of color and picture). Under plain wallpaper fit any ornamental border that fits into the general background. If used in the room, then the edging can be selected for any of the dominant colors (or pattern). Keep in mind that in specialized stores, wallpapers are sold complete with an accompanying frame.
• The size. The state standard provides for various lengths (5-10 meters) and widths (starting from a couple of centimeters and ending with meter-long specimens).
• Do not forget to match the material of the edging and wallpaper sheets ( vinyl wallpapers- vinyl edging; non-woven - textile frame, etc.).
• Wallpaper strips in the bathroom and children's room should have different parameters water resistance and durability. The same goes for the rest of the rooms.
• The texture of the border is embossed and smooth, and can also be made of lace, gold and other coatings. It all depends on the individual preferences of the user.

Recently made repairs and think that you do not need wallpaper borders? In vain. You may need them ahead of time. Indeed, almost no manufacturer can guarantee that its wallpaper sheets will last in their original form for the desired number of years. Also remember what kind of canvas children like to create their masterpieces on. Correctly. These are all wallpapers.

Do repairs competently, and let your interior fill with a warm, abundant atmosphere. Good luck!

Many now believe that curbs and friezes have outlived their time. But, as you know, everything new is a thoroughly forgotten old and young designers are increasingly using this detail of decoration. The question of how to glue wallpaper with a border in the middle, top or bottom worries many of our compatriots, and we decided to give some advice from our experts.

There is an expression border wallpaper, but it is not entirely true, because any wallpaper that is edged with a border tape can be classified as this species. It would be more correct to consider the tape itself, its types, purpose and installation methods. It is classically believed that this ribbon should be no more than 20 cm wide. Anything that is wider is already called a frieze.

Important: according to the laws of psychological perception, it is believed that the wider the tape edging the room, the visually lower the ceilings will appear.

General points related to the border

• There is a fairly wide selection of this material on the market at the moment. smart decision will pick up the edging directly when buying wallpaper. As a rule, a competent seller will be able to offer you several options for decorating your canvas. It is important to decide in what style you want to decorate your home.
• You can choose in different ways, in the first case, you should focus on the color shade. For a peaceful atmosphere, a ribbon of the same color as the wallpaper is taken, but with different shade. To give brightness and dynamism, you need to use the opposite colors of the spectrum.
• The second way involves drawing. The drawing should be consonant with the ornament on the walls. It may differ in scale or color scheme, but still should be similar.

Tip: do not overly bright edging, it will be very striking, sometimes even annoying.
This detail of the interior should emphasize beauty, but in no case be intrusive.

What coatings are used

• If speak about paper wallpaper, then this is for the most part an economical option, they are glued quickly and simply, but they do not last so long, they often lose their luster and fade. The most you can do is dust off with a dry cloth.
• Vinyl canvases are considered the most stable, they are not afraid of almost anything.. They can be wiped with a damp sponge and even gently washed with gentle detergents. Vinyl is UV resistant and durable enough. They will have time to bother you before they become unusable.
• Textile tapes are a specific product, their price is quite high and such a finish is suitable only for an interior made in a certain style. Here you can often find two-level wallpaper for the separation of which a special border or frieze is used.
• There are also ribbons acrylic coated, they are quite hardy and beautiful, but their price is lower than that of vinyl. Another plus is that acrylic is a breathable coating.
• An interesting effect can be obtained when using synthetic colorless borders.. They have a certain texture and are used in tandem with plain coatings for painting.

Where can I put the tape

• Border tape wallpaper can set off or separate. At low ceilings, it is better to put a narrow edging on the top and limit yourself to this. If you want to add a twist to the interior, then you should try to arrange the wallpaper different colors, separating them with a border, but do not forget, the wider the tape, the lower the ceilings will appear, plus the tape is started either at the height of the window sill or 1/3 of the height of the wall. Otherwise, the ceiling will also drop a lot.

Important: when planning to compose multi-colored or diversified canvases, it should be noted that the material should be one. If you use vinyl, then everything should be vinyl.

• As for the bottom edging, it is used extremely rarely and for the most part in order to hide unevenly glued canvases.

The video in this article shows the general technique for working with wallpaper.

General pasting technique

• As for the purchase of the tape, the instructions here are elementary. We measured the perimeter of the room and got the quantity. If the border is ornamented, or the application path is too complicated, add 15 - 20% to the resulting value for trimming.
• Sticking wallpaper with a border with your own hands begins, of course, with gluing the wallpaper itself. Then, using the level of the ruler and a pencil, mark the route along which the tape will be mounted. Moreover, it is better to navigate not by the ceiling, but by the floor. So in case of irregularities on the ceiling or deviations from the level, the defect will not be noticeable.

Important: in standard Khrushchevs, the border should fit into the ceiling and not be too wide.
High ceilings can be shaded by placing tape between the top edge of the window and the ceiling.
A mid-section at 1/3 wall height can also visually lower ceilings.

• The edging begins to be glued after the wallpaper has completely dried, this is about 48 hours. Glue can be used the same as for this one or you can purchase a special one. acrylic compound designed directly for mounting friezes. After application, the cut strips can be folded with the smeared side inward and left for 5 to 10 minutes so that the base is well saturated. You can smear several strips at once and work calmly.
• It happens that heavy wallpaper, having a thick textured pattern, are mounted end-to-end with a curb. In this case, when wallpapering, an empty space is left for the border, but it should be somewhat narrower than the width of the tape. Next, overlap the tape on the wallpaper. After that, a metal ruler is applied to the edge of the tape and the excess wallpaper is cut off with a knife. If necessary, the tape is smeared with glue and mounted completely.
  
• When pasting doors or different kind niches there is a need for proper docking in the corners. The instructions here are also not very complicated. Borders are superimposed on each other, after which sharp knife both tapes are cut at an angle of 45º. Next, you just need to remove the excess, coat with glue and glue.

Conclusion

The use of edging is not a mandatory requirement for interior design. But it can greatly revive general form rooms, bring their own, special charm.

Wallpaper border (or frieze, edging, edging, border tape) is made of various materials a strip of small width, which is glued on top of the wallpaper or in places where they are paired with other materials. Choosing the right edging is not so difficult. This article describes in detail what you need to consider and what nuances you should pay attention to before buying a wallpaper border.

Often when buying wallpaper in addition to the main finishing material it is proposed to purchase such a decorative element as borders. This product allows you to add appearance rooms, highlight significant design details, adjust the visual size inner space, hide finishing errors, set boundaries at joints with other materials.

Almost any specialized wallpaper store has border tape catalogs. The buyer can choose it independently from the offered assortment. However, many manufacturers greatly simplify the selection task by providing one or more border options with the wallpaper model.

As a rule, the manufacturer offers two combination options: by color or by pattern. For example, green wallpaper in light colors with floral ornament go well with a white or dark green border with or without the same pattern. In the case of a monochromatic coating, you should opt for a frieze of a similar shade with some kind of print. Such an addition will enrich the design of the room and make it more refined and attractive.

It is important to choose a border that will be in harmony with

Helpful advice! In one collection, you can find wallpaper and border tape with different patterns. This combination may not look very good in small room, too oversaturating the appearance of the walls and drawing too much attention to them.

Another option from manufacturers are wallpapers and borders with the same image. For example, the first ones are decorated with large geometric figures, and the edging is identical in color and shape, but smaller. It should also be taken into account that the wall covering should be combined not only with the frieze, but also with other design elements.

With regard to choice colors it must be said separately that a very colorful ribbon is appropriate only in rooms where the emphasis is on the walls. At the same time, even lockers and other furniture items are not planned to be hung. However, there is one type of room where the use bright colors justified - childish.

When a child reaches a conscious age, caring parents often want to paste over his room with wallpaper of the theme that is interesting to him in this moment. This is major mistake because the hobbies of a young child usually change very quickly. It is much more expedient to choose a curb tape “by interests”. Replacing it will be much easier, cheaper and faster than completely re-gluing the entire covering in the nursery.

The walls themselves are executed in a neutral positive color. It is worth remembering that a room that is too bright and defiant can cause a feeling of anxiety in children.

The choice of material for the execution of the border tape for wallpaper

There are several options for making a decorative frieze.

Paper border for wallpaper. This option is subject to ultraviolet rays, pigment burnout, as well as mechanical damage during cleaning. Such framing in repairs can be used if relatively frequent changes in the interior of the room are foreseen. The main advantage is the ease of pasting and removal. All this is worth taking into account before buying a paper border for wallpaper.

Vinyl framing. It is more practical, durable, strong, less prone to fading, easy to clean with wet cleaning. Vinyl tape is well suited for hallways, kitchens, bathrooms and other high-pollution areas.

Acrylic piping. Includes all the benefits of vinyl, but has more low cost due to the use of acrylic emulsion in it.

Textile edge. It has a two-layer structure of paper and fabric, resulting in high density and coating strength.

How to place a wallpaper border on the wall

It should be noted right away that the edging is never glued in the center of the wall. Otherwise, visually the room becomes lower. The ideal location is 1/3 of the height from the floor. In this case, the strip becomes the boundary between the wallpaper. different kind. One of classic examples combination is "striped wallpaper - edging - patterned wallpaper." The choice can also be made in favor of plain wallpaper, while the lighter ones are glued at the top, and the dark ones at the bottom.

The framing arrangement described above is especially relevant when pasting the kitchen. Practicality is the main factor here. Often more expensive coverage is glued to the top of the wall, and special washable wallpaper and vinyl or acrylic edging cover the work area.

The most common location for a decorative border for wallpaper is under the ceiling. At the same time, it partially replaces the ceiling plinth. It must be taken into account that it is recommended to choose frieze pasting at the very top of the wall only for large spacious rooms. This emphasizes the beauty of the ceiling, makes the room more comfortable and cozy, corrects its visual dimensions.

Helpful advice! O wallpaper edging can be pasted vertically. This allows you to visually highlight a specific section of the wall or functional area. You can edging doorways, mirrors, furniture, etc.

Very rarely, the border tape for wallpaper is located at the bottom near the floor. This technique can be used if a mistake was made when measuring the height of the wall and the wallpaper turned out to be a bit short after cutting. There are also cases where low-quality material shrinks when it dries.

Related article:

Wallpaper types. How to choose wallpaper for apartment rooms: living room, bedroom, nursery. Wallpaper for walls: catalog of photos and prices for different kinds wallpaper.

Also, the tape is glued to the ceiling and, like a mirror image, immediately below it on the walls. This arrangement visually adjusts the size of the room and its appearance.

Tips for preparing and applying wallpaper edging

When pasting wallpaper absorb moisture and become more susceptible to mechanical stress and pollution. Therefore, you should let them dry well and only then proceed with the application. wallpaper borders. The drier the surface, the better the adhesion of the two materials after application.

Adhesive for borders polymerizes (dries) rather quickly. Therefore, in the absence of much experience, the pasting process should be divided into stages. This avoids situations when the smeared edging has dried up and become unusable. It is also worth making sure in advance that all necessary tools.

Some wallpaper has a pattern with horizontal guides that you need to navigate. The lack of parallel between the frame and the main wall pattern can be very noticeable and negatively affect the visual perception of the design.

When cutting, the pieces need to be made a little longer, which will allow you to compare the images. This is true for borders with a pattern.

It is necessary to carefully check the surface of the walls on which it is planned to place the tape. Any irregularities will sooner or later appear due to thin material execution. It is necessary to cover up all the bumps, cracks, remove the remnants of paint or glue.

When using self-adhesive wallpaper edging, you should not rely entirely on its quality. Over time, it may begin to fall off. Therefore, it is much more expedient to additionally lubricate the surface with glue when placing than to solve the problems that have arisen in the future.

Sometimes the wallpaper border is glued end-to-end with the main coating. This is true for varieties with a developed or high relief (two-layer wallpaper with embossed or with an additional layer of foamed vinyl). In this case, ordinary wallpaper glue is used.

Necessary tools for applying a border on the wall

To glue the frieze, you will need the following tools.

Level. It is very important to strictly follow horizontal arrangement edging, which allows you to perfectly combine the border around the entire perimeter of the room and not spoil the appearance of the interior.

Smoothing roller. Serves to expel bubbles and excess glue. This tool can be replaced with a plastic spatula or a soft sponge. However, the roller has an advantage: the likelihood of displacement when smoothing the wallpaper border tape is minimal.

Brush. The surface on which the frieze is glued must be as clean as possible. A soft brush will help get rid of dust immediately before pasting.

Sponge or absorbent cloth. It is needed to remove excess glue from the wall. The fabric should not be fluffy. It is best to use natural white linen or cotton fabric so that the cloth dye does not smear the coating when wet.

glue roller. Can be replaced with regular paint brush. However, it should be noted that when pasting the pile can cause a lot of inconvenience and slow down the work. If one person is pasting, it will be quite difficult for him to simultaneously hold the plastered frieze and at the same time get rid of adhering debris.

Wallpaper glue. When choosing an adhesive, it makes sense to additionally consult with the seller at the time of purchase, indicating the material of the frieze and on which surface it should be applied.

Stepladder or table. If you plan to place the curb on the walls in the upper part, then you will need a stepladder or durable table capable of supporting the weight of a person. It is necessary to remove in advance all objects that interfere with movement along the perimeter of the room. This will also reduce the chance of further injury from falling from a height.

Desktop. Necessary for placing the tape when spreading. Working surface must be thoroughly cleaned of dirt and can be covered plastic wrap to avoid any contamination during operation.

The process of gluing a decorative border for wallpaper

Before proceeding with the main operations, once again make sure that all the necessary tools and materials are available. Remove all unnecessary items from the room or protect them from accidental contamination, conveniently position the work surface.

Glue preparation. It is highly recommended that you read the manufacturer's instructions carefully, as some adhesive mixtures bred unconventionally. According to general rules, the dry mixture is placed in a container with water and slowly mixed. The subsequent infusion process takes approximately 20 minutes. After this time, the glue is re-mixed until a homogeneous mass without lumps is obtained.

In the case of using an adhesive mixed with an acrylic mass, mixing with water is not required. Such material can be used immediately. It should be noted that thanks to acrylic base Provides perfect adhesion to the surface.

Note! Incorrect preparation of the adhesive will subsequently affect the decorative features of the wallpaper edging. Therefore, it is worth taking this step responsibly. Otherwise, the tape will have to be re-glued.

markup. In order for the edging to be glued evenly, you need to mark in advance with a simple pencil the location of its location. This will greatly speed up and simplify the subsequent work and make its result ideal. For marking, a level and a long ruler (or other straight guide for drawing) are used. The greater the distance between two points when drawing lines, the less likely the deviations.

An interesting approach that greatly speeds up the process of drawing lines is the use of a guide line. At the same time, you can mark as much as you like in one step long wall. However, for such work, at least three people are needed: two for maintaining the guide and one for drafting.

Tape cutting. This step is very simple, but requires special care. After the surface is marked, measurements are taken and pieces of wallpaper border tape are cut. If the length is chosen with a small margin, the process of combining joints can be greatly simplified. Excess can be neatly trimmed immediately after being placed on the wall.

Glue application. Glue is applied to the curb tape with a brush or roller. The greased edging is left for 5-10 minutes. This time can be used to once again go over the surface of the wall with a brush and remove settled dust.

Applying the edging. The wallpaper border is neatly placed on the wall according to the pre-made markings. When gluing in corners, the end of the tape must grip the adjacent wall. The next strip is glued with an overlap, the allowance is 5-10 mm. This avoids gaps. Do not make sudden movements and strong bends. Otherwise, the border may break.

After application, using a special roller (or a clean cloth), air bubbles and excess glue are expelled from under the material. Next, excess glue is carefully removed with a cloth or sponge. After the entire perimeter of the room has been processed, the curb glued to the wall should dry well. Drying time depends on the selected adhesive, but often up to 24 hours.

Border for wallpaper around the perimeter of openings

Selection of door or window openings decorative ribbon will be a spectacular decoration and addition to overall design premises. The main difficulty here is that the pieces of tape must be connected at an angle of 45 degrees.

To get the perfect joint, you need to place a vertical and horizontal stripes overlapping, one on top of the other. Immediately after that, attach a ruler along the line of the future joint (diagonally) and draw with a sharp knife, cutting both layers. Next, fold the edges and remove the trim. After that, return the parts of the joint to their original position and carefully smooth out, while removing excess glue.

Choosing and applying a border to a wall is a simple task that even the first time can do it. However, it is worth remembering that what in theory seems new, original idea- in practice, it can give far from the expected result. Therefore, it makes sense, if not to be guided, then at least to take into account the well-known rules and recommendations of specialists.

With the help of a special strip for the walls, it will not be difficult to successfully decorate the room, creating a comfortable and cozy atmosphere of completeness in it. A wallpaper border is used to delimit, expand, and also reduce a room. For example, if it is necessary to emphasize the ceilings, a similar strip is glued at the top at the junction between the wallpaper and the ceiling. If several types of wallpaper material are used in the room, it can be used to easily separate different zones, creating an unusual atmosphere in the interior.

A similar decor element is used to delimit walls in different rooms Houses. For example, it is impossible to do without it if there is a need to take care of play area in the nursery. Children's border is a colorful and bright material with drawings of your favorite characters. For the bedroom, living room or kitchen, there are many options for such material, so it will not be difficult to choose the right colors.

The main features of the location of the border on the wall:

1. Top of the wall. The strip is presented in the form of a decorative piping, which creates a cozy atmosphere in the room.
2. ceiling perimeter. Here the border is a separator and a zonator.
3. Near the floor. It is considered a great way to hide flaws.

Some homeowners stick the wallpaper border vertically. So it is possible to separate a certain zone. Sometimes a similar application is necessary for framing doors, windows or mirrors.

Wallpaper borders: self-adhesive and other types of materials

Today, many manufacturers make wallpaper borders with identical patterns, but they differ in size and material.

A large assortment modern wallpaper often makes it difficult to choose. How not to get confused and accept correct solution our material will help you:

The following are the types of wall borders that are divided:

1. To size. The width of the border can vary significantly. It varies from a few cm to a metre. A standard roll holds 5-10 meters of material.
2. By color. Some products are plain, while others are printed.
3. Mounting type. There are self-adhesive borders - these are special borders on which a special adhesive is applied. On such products there is a special protective film, so the material is easy to use even for a beginner. When gluing other models, it is enough to moisten the material with water (glue is applied to them during production). Other types must be treated with glue intended for these purposes.
4. By texture. Some products are smooth, while others have a variety of embossing.
5. By external features. There are simple wallpaper borders (regular pattern or holographic pattern), as well as decorative models (lace, or gilded).
6. By topic. For a certain room (kitchen or nursery) in the house there are the most suitable models, with corresponding drawings.

In addition to the above characteristics, wallpaper borders differ in material.

Paper

They belong to the budget category, they are easy to use. However, this material is short-lived and cannot be washed.

Vinyl

They are considered to be of higher quality, which are easy to clean and glue. Similar decorative items serve long years. This type of baguettes is recommended for use in rooms with increased pollution (kitchen, bathroom or dressing room). They have a porous base, which allows the walls to "breathe".

Acrylic

Borders made of this material have high quality and have a lot positive characteristics. Here, a special acrylic emulsion is applied to the surface of the strip.

How to make a wallpaper border with your own hands

Some owners prefer to make their own border for the walls. The most common way is the use of other wallpapers. It is necessary to mark in advance the line of the desired width and carefully cut the strip along it.

Interesting! To make an unusual wallpaper border, you can use a variety of piece materials, as well as decorative plaster.

But there is more creativity to the process of making a border with your own hands. If this product is to be small size, you can make it with the help of photos. This option will great solution to decorate a child's room.

Most suitable materials for self-creation This wall details are:

• Postcards or fragments of cardboard;
• Textile materials, as well as colored sheets of fluorescent paper;
• The film is self-adhesive.

Modern designers also use old magazines, posters, and covers from old records to create an unusual wallpaper border. The result will depend entirely on the imagination and efforts of the decorator.

Wallpaper in the bedroom should have a calming effect. What color should these wallpapers be? The answer to the question in our article:

How to glue a border on wallpaper: application features

You should not start pasting with a border until the wallpaper is completely dry. Indeed, unlike a dry surface, the strip will not hold well on a wet material.

When choosing an adhesive for this product, it is recommended to give preference to an acrylic-based adhesive. Because it can be used without dilution with water. Plus, the tube comes with a special brush applicator and this glue is very resistant.

The whole process of pasting walls with a wallpaper border is not difficult. However, it is necessary to take care of the ideal flat surfaces. It is also recommended to use building level. Using a pencil and a level, you need to mark the height of the product. It must be the same everywhere.

After that, you should break the roll into segments of the desired length. Then each part of the product is laid face down to apply glue. To facilitate the process, it is recommended to fold the canvas in the form of an accordion (when there is a side with glue applied to it inside).

It remains to apply the strip evenly to the wall and smooth it well. When smoothing, it is better to move from the middle of the border to its edges. It is important to ensure that the canvas is completely glued.

Important! Each strip of the border should be combined with the previous one. In the corners, these products must be overlapped.

Sticking wallpaper borders (video)

Wallpaper border has been used for decoration for decades various rooms. In addition to the fact that this product is used to emphasize a certain area in the room, it can be used to hide small defects walls. At self-manufacturing the border manages to achieve the most unexpected decor options.

Wallpaper borders (photo)