Acrylic wallpaper - what is it: the pros and cons of the coating. Acrylic wallpaper: application tips, varieties (22 photos) Paper-based acrylic wallpaper how to glue

Acrylic wallpapers are beginning to enjoy great popularity among buyers. They are similar to vinyl, but the acrylic coating is much thinner, it is easier for air to pass through itself. Acrylic is one of the most environmentally friendly materials.

Acrylic wallpaper is thin and eco-friendly
Recently, acrylic wallpapers are becoming more and more popular.

Types of acrylic wallpaper

Acrylic wallpaper consists of 2 layers - base and foamed acrylic. There are two types of acrylic rolls.

Acrylic wallpaper on non-woven base

Advantages and disadvantages

Acrylic wallpaper has many advantages compared to other types:

• ecological purity of the material;
• high quality;
• low price;
• resistance to various types of damage;
• a light weight;
• a variety of colors and relief patterns;
• do not require special care, these wallpapers, with a little care, can be wiped with a soft, damp sponge.

Acrylic wallpaper is easy to clean

The cons of acrylic rolls are much less than the pros:

• poor water resistance;
• less life than vinyl.

How to choose wallpaper and glue for them

When choosing acrylic wallpaper, the main attention should be paid to the interior of the room in which they will be located. Bright, unusual colors are suitable for modern styles. Monochromatic wallpapers, designed in the same color scheme with objects in the room, will go well with the classics. If sunlight does not enter the room, then warm-colored wallpapers will be very useful here. For interiors filled with sun, it is better to choose a coating of cold shades. Do not choose bright colors, large patterns for small spaces. This will visually reduce the room even more. As for whether to choose a domestic company or a foreign supplier, it depends on your desire. Since domestic and imported canvases are of the same quality.

The choice of glue should be taken seriously

The choice of glue is a responsible matter. Its quality affects the strength with which the wallpaper will be attached to the walls.

You need to pay attention to properties such as:

• viscosity;
• acidity (if the manufacturer indicated a pH value of 6-7, then such an adhesive composition will not turn yellow after drying);
• hygiene - the presence of bactericidal additives in the adhesive composition;
• shelf life, operation;
• moisture resistance;
• service life - the period of time during which bubbles will appear between the wallpaper and the base.

For acrylic wallpaper you need to select a special glue

Acrylic paper-based wallpaper requires a special adhesive. The composition of such glue includes starch and various additives that prevent the appearance of mold and fungal microorganisms on the paper roll. It is necessary to follow the instructions exactly so that the adhesive composition retains all the declared properties.

Glue should be applied according to the manufacturer's instructions.

Preparing walls for gluing

Before proceeding with gluing acrylic, you should properly prepare the base. The durability and reliability of finishing works depend on this.

First of all, cleaning work should be carried out - the old finishing materials (old newspapers, fallen off plaster, peeling paints) are carefully removed from the walls.

First you need to clean the wall of old wallpaper

Sometimes it can be very difficult to remove the old wallpaper. If it is a paper material consisting of one layer, it can be softened with water or with a special wallpaper removal solution. If there is a moisture-resistant two-layer canvas on the walls, you must first make cuts on it with a knife, then apply the solution.

There are several ways to remove old paint. Oil, enamel are removed with metal scrapers. The water emulsion is cleaned with metal spatulas, which are moistened in soapy water. Places where the paint holds firmly can be easily cleaned with a grinder.

Paint can be removed from the walls with a special machine.

To assess the strength of the plaster, the walls must be tapped with a hard thing. Exfoliated, bubbling plaster should be carefully removed. Then plaster these places together with the cracks formed in the walls.

After cleaning work, the surface of the base is primed with a special agent. You can choose the appropriate type according to the characteristics indicated on the package. A primer is needed in order to strengthen the walls, improve the adhesion of the adhesive and the base.

At the end, it is recommended to prime the walls

How to glue acrylic wallpaper

When the preparatory work is completed, proceed to gluing. To ensure that the material lays flat, markings are made from floor to ceiling. A roll of wallpaper is cut on a flat surface. About 5 cm of stock should be added to the desired length. A pre-prepared adhesive solution is applied to the paper for a couple of minutes. During this time, the wall is treated with glue. After that, the strips are applied to the wall, leveled along a vertical line, glued. To avoid air bubbles, acrylic wallpaper is leveled with a soft brush from the center to the edges. If bubbles still form, you need to pierce them with a needle, then smooth them out. Excess matter from below is cut off with a knife.

To avoid air bubbles, acrylic wallpaper is leveled with a soft brush from the center to the edges.

Excess glue protruding from under the wallpaper is removed with a clean, dry cloth. It is better to start sticking from the corner of the room. It is advisable to have a partner for this work, then sticking acrylic wallpaper will be done quickly and efficiently.

Acrylic wallpaper on a paper basis requires special gluing conditions. The glue is applied in a very thin layer to avoid excessive moisture. When gluing such wallpaper, it is important to avoid drafts. Otherwise, deformation of the web or its peeling will occur. The room is ventilated 2 days after gluing.

Glue on the wallpaper is applied in a thin layer

Acrylic wallpaper care

Acrylic wallpaper is very easy to keep clean. The most important thing is to clean with a soft sponge dipped in plain water without any additives. Acrylic coating is very delicate, with a hard brush and inappropriate means it can be ruined. In stores there are special detergents designed for wallpaper. The minimum amount of washing liquid is applied to the sponge and the acrylic contamination is gently wiped. After that, wipe with a damp cloth. Instead of chemical liquids, ordinary laundry soap is used, which has a cleansing effect. If you properly care for acrylic wallpaper, they will last a very long time.

Video: Which wallpaper to choose for an apartment

Paper wallpapers are one of the most difficult materials to work with. Their high-quality sticker requires considerable experience. This is due to the fact that paper wallpapers "show" all the flaws in the preparation of the walls and lose strength when wet. In addition, wet paper loses its linear dimensions. Therefore, it is important to follow the instructions for the preparation of glue and to dose its amount very accurately.

FIRST OF ALL: Before starting work, make sure that the installation instructions are fully understood. Make sure that the article of the received wallpaper corresponds to the one ordered and the batch number matches on all rolls.

BEFORE CUTTING carefully check the wallpaper for quantity and quality. All discrepancies must be identified before work begins. Claims for the difference in shades or the difference in the article numbers of the received materials, after cutting the rolls into strips not accepted. If a defect is found, immediately stop work and contact the supplier. Marriage claims after wallpapering not accepted. Wallpapering confirms that the goods have been accepted.

1. SURFACE PREPARATION:

The surface of the wall must be smooth, clean, dry, free from dirt and dust. The surface should not be varnished, have areas that do not absorb moisture and greasy spots. Painted surfaces should be rinsed to remove dirt and salt stains or deposits. Surfaces painted with oil paints should be treated with sandpaper. It is impossible to paste over surfaces covered with fresh plaster without prior drying and priming.

To make sure that the wall surface is ready for wallpapering, you can conduct a test: run your hand along the wall, there should be no chalk and other foreign particles left on your palm. Stick a piece of plastic film of any size on the wall, securing it with tape on four sides. If after a day there is no condensation under the film, then the surface is ready for gluing. In Russian climatic conditions (strong temperature fluctuations during the change of seasons), for better wallpaper fixing, we recommend additionally applying paper wallpaper glue or universal glue to the wall surface (as a primer).

2. PREPARATION OF STRIPS:

Cut 3 strips from the first roll along the height of the ceiling in the room, taking into account the fit of the pattern and an allowance of 5-10 cm. to each lane. The allowance is necessary to align the edges of the wallpaper on the ceiling and floor. For pattern-matched wall coverings, align the next strip of wallpaper with the previous strip (already cut off) until the pattern matches exactly. Do not cut the next strip until you have this sure match. Mark each cut strip pencil on the reverse side in order. It is necessary to glue the strips strictly according to the marking.

3. STRIPE DIRECTION: The sticker of some types of wallpaper is sometimes made by the reverse method (counter sticker). For European wallpapers, this is indicated by the icon:

4. TRANSLATION OF THE MARKING ON THE WALLPAPER MADE IN THE USA:

DROP MATCH- the second sheet of wallpaper when fitting is shifted to the full height of the picture.

HALF-DROP- the second sheet of wallpaper when fitting is shifted by half the height of the picture.

STRAIGHT MATCH- the second sheet of wallpaper, when fitting, shifts relative to the first one to the full height of the pattern with a flip.

STRAIGHT ACROSS- the same as STRAIGHT MATCH.

RANDOM MATCH- decal without fitting.

5. STICKING COATINGS:

Important! Stick no more than 3 strips of wallpaper following the instructions and stop working until the wallpaper is completely dry (48 hours). After that, carefully inspect the surface of the strips, the joints between the canvases and the combination of the pattern. If you are satisfied with the quality - continue to work. Do not continue pasting the remaining rolls if you are not satisfied with the quality of the pasted 3 strips. Keep labels from all rolls until the end of the repair.

Cellulose-based glue (Kleo and similar) is recommended. It is necessary to dilute the glue strictly in accordance with the instructions on the package (the amount of water is for light wallpaper). Glue is covered with wallpaper. Apply glue to the back of the wallpaper in the amount indicated in the instructions. Make sure that the entire canvas is evenly covered with glue, especially the edges. Don't use a lot of glue, it's better to add it to the wall when pasting the strip. If there is too much glue, it will come out at the joints and can get on the front side, which should not be allowed.

After applying the glue to the canvas, it must be folded with the glue inside and allow the glue to soak the base material. This takes 5 to 15 minutes depending on the type of wallpaper. Fold the strip as follows. Fold the top third of the strip towards the center, and fold the remaining 2/3 towards the center so that the top and bottom edges of the strip are in contact. When folding wallpaper, avoid kinks! When folding the strip, make sure that its edges lie flat. The strip smeared with glue should not be left for more than 20 minutes so that the glue does not dry.

After pasting the top half of the strip of wallpaper, begin to unfold and align the remaining bottom part so that the previous strip joins the newly pasted one. Make sure the drawing lines up correctly. Gently smooth the canvas with a special roller or wallpaper brush (do not use a wallpaper spatula, you can damage the wet surface of the wallpaper) in order to eliminate the formed bubbles. This defect can only be completely eliminated immediately after gluing, in a very short period. The appearance of small bubbles under the wallpaper is normal, they will disappear during drying. Try not to use force when smoothing the wallpaper, do not press hard on the surface, gently smooth the canvas from top to bottom and from the middle to the edges, do not stretch the wallpaper strips along the length and width. This can stretch the wallpaper, cause misalignment of the pattern along the edges of the rolls, or cause gaps between the strips after the glue dries. Press down all seams lightly with a seam roller. Repeat the procedure with the remaining wallpaper strips.

Seam the edges of the wallpaper with a tapered seam roller to get good seams. The edges protruding from above and below are cut off with a knife and a metal spatula. When gluing, do not allow glue to get on the surface of the wallpaper, stains are difficult to remove and their complete removal is not guaranteed. Residues of glue should be removed with a dry sponge, without rubbing the glue over the canvas. All protruding adhesive must be removed before the surface dries. During wallpapering, avoid drafts in the room.

Periodically check already glued strips for air bubbles. Remove large bubbles as above. Small bubbles can be removed by gently pricking them with a thin needle and squeezing the air out of them.

5. STICKING THE CURB:

The manufacturer recommends wallpapering first. It is preferable to glue the borders after the base coats have dried. Drying time depends on air temperature and humidity in the room. Use a special border glue to stick borders. Glue is applied to the back of the border.

ATTENTION!

Don't use too much glue.

Do not allow adhesive to come into contact with the surface of the material.

IMPORTANT!

Acrylic has been used in construction for a long time and densely - it is a good sealant-putty for floor coverings, and glue, and paint, and decorative plasters, putties, and much, much more. Moreover, the scope of use of this material is constantly expanding - wallpaper has become the latest novelty using acrylic. According to the manufacturers, they are quite capable of replacing their structural counterparts, made from weak foamed vinyl. Compared with them, acrylic wallpapers have a lot of advantages - it is with them that we will deal in this article, in which, together with the site, we will study their features - we will get acquainted with the advantages and disadvantages, varieties and gluing technology.

Wallpaper acrylic on paper basis photo

Acrylic wallpaper: advantages and disadvantages

By and large, if we compare vinyl and acrylic, then the latest wallpaper can highlight quite a lot of advantages, which are expressed both in performance and in some useful properties. If we talk only about the main advantages that acrylic-coated wallpapers have, then among them the following points can be distinguished.

And this is not all the advantages of this finishing material - among the smaller ones, one can mention rather high strength, low weight, which in itself eliminates the need to use strong adhesives, as well as a simple gluing technology that everyone can handle. As for the shortcomings, here one can only single out their ability to attract dust, which is due to the deep structure of the wallpaper. In principle, this can be put up with, taking into account the high aesthetic characteristics of this coating.

Types of acrylic wallpaper and their features

Another disadvantage of this material (not very significant) can be called a small number of varieties. There are two of them, but this in no way indicates a limited choice - here it is just the opposite. There are few specific types, and the variety of colors, shades and structures, as they say, is a great many.

That's all. All other varieties of acrylic wallpaper are due to the structure (in most cases, this is a drop of different sizes) and a pattern that can have both an abstraction and a completely artistic design. By the way, the simplest and cheapest acrylic wallpapers have a pattern in the form of a multi-colored drop - having a hopper (special spray gun) at hand, such a drop can be applied directly to the wall, and it will cost even less than buying such wallpapers. Naturally, if you do not hire a master for this work.

Paper wallpaper with acrylic coating photo

How to glue acrylic wallpaper: features of working with them

As you understand, the two subspecies of acrylic wallpaper described above have slightly different gluing technologies - the difference is due to the properties of the base, which all master finishers are familiar with. But these are not the only subtleties and nuances associated with decorating walls with acrylic wallpaper - there are not so many such nuances. As they say, one, two and miscalculated.

In principle, this and all the so-called subtleties. In all other respects, the technology of gluing acrylic wallpaper is no different from applying other types of paintings to the wall. This is the same process of leveling the walls, the same, the same vertical for gluing the first strip and the same principle of joining the canvases. In general, nothing unusual and super complicated.

In conclusion of the topic about acrylic wallpaper, it remains to add only one thing - to say a few words about the proper care of this decorative wall covering. It should be understood that competent care is a service life at least twice as long. Caring for such wallpaper is not very problematic. As mentioned above, such wallpapers do not tolerate abrasive treatment - they love a soft, damp cloth. Although we mentioned above that detergents can be used to clean the acrylic surface, it is still better not to do this - if you replace them with ordinary laundry soap, then the cleaning efficiency will not suffer from this.

Acrylic wallpaper is a paper sheet with foamed acrylic applied to it. They are an alternative to the generally recognized leader - vinyl. This is something between paper and vinyl wallpaper. This material has appeared relatively recently, but has already managed to win its niche in the market of finishing materials. Let's look at the pros and cons of acrylic wallpaper, the features of care and gluing.

Acrylic wallpaper - pros and cons

First of all, the price speaks for such wallpapers - it is significantly lower than that of vinyl ones. However, in fairness it should be noted that the service life of acrylic wallpaper is also significantly lower compared to its direct competitors.

Many credit acrylic wallpaper with the fact that they are able to pass air well, which means they are breathable. This is not entirely true. Indeed, they let air through, but exactly until the moment you apply glue to them. After drying, the glue forms such a dense crust on the back of the wallpaper that there can be no talk of any "breathing". Just a marketing ploy, nothing more.

Another weak point is the acrylic itself. The fact is that the acrylic pattern is not applied to the entire surface, like vinyl, but only in places of patterns. This makes the wallpaper more vulnerable to moisture and mechanical stress. Therefore, they cannot be used in rooms with high humidity. Cleaning should also be careful, but more on that below.

The advantages, in addition to the low price, include their higher strength, compared with paper ones. In addition, they have a fairly rich selection of designs and colors, although they are inferior to vinyl in this. It should also be noted that due to the smaller depth of the pattern, they are lighter than vinyl, which will allow you to purchase cheaper glue. Due to its strength, such wallpapers can mask small irregularities on the walls, and the texture of the pattern will make them completely invisible.

Acrylic wallpapers are made of polymer compounds, which excludes the appearance and reproduction of various kinds of bacteria and microbes. Such material is absolutely non-toxic and does not produce any emissions into the atmosphere. This is a very weighty argument for choosing a nursery, and indeed, for people who care about their health. An interesting feature is that you can buy acrylic wallpapers with a rather chic design for the price of ordinary vinyl ones. But their competitors with a similar design will not be affordable for everyone.

In general, acrylic wallpapers occupy a worthy place among decorative materials, but there is also a downside to the coin. Not all buyers can distinguish acrylic wallpaper from vinyl. Therefore, often, especially in the markets, you can buy inexpensive vinyl, which actually turns out to be acrylic. As a rule, this is detected during the first wash, when the pattern begins to deteriorate from moisture. In order not to become a victim of scammers, ask sellers for product quality certificates. Otherwise, acrylic wallpapers are worthy competitors to vinyl and are head and shoulders above paper ones, slightly inferior to the latter in price. These are the main pros and cons of acrylic wallpaper, now let's talk about caring for them.

Acrylic wallpaper cleaning

Cleaning vinyl wallpaper is quite simple, although it has its own characteristics. Do not use abrasives as they will permanently damage the fabric. Do not use detergents either. Cleaning is best done with a damp cloth or sponge. Take some container with clean water, soak a rag or sponge in it and wring it out well (copiously moistened with water can damage the wallpaper). Next, gently wipe the surface. After such a simple cleaning, the wallpaper will again acquire its original appearance.

Acrylic wallpaper gluing

The next step is to prepare the canvases. We cut them in accordance with the height of the walls, plus a few centimeters in reserve. We lay the cut canvases on a pre-prepared solid base and apply glue. Glue can be used for both paper and vinyl wallpapers. The applied glue should be held for a while so that it is absorbed.

Now you can glue. Most often, the “butt” method is used for stickers, less often with an overlap. Next, you need to carefully smooth the glued canvases from the center to the edges. Before laying the next sheet for spreading with glue, do not forget to wipe the surface of the glue left from the previous one. During the execution of work and further drying of the glue, it is not necessary to ventilate the room, since this type of wallpaper does not tolerate temperature changes.

We have reviewed the main ones with you, you can read about other types here -.

You may also be interested in:

Acrylic has established itself as an excellent component in the composition of a huge number of building and finishing materials, including adhesives, plasters, paints, putties, and various sealants. In addition, it is used in the manufacture of sanitary ware. Acrylic wallpaper has become an interesting option for its use, but not everyone knows what kind of wall coverings it is.

Structurally, this is an analogue of vinyl wall coverings, except that it is acrylic spraying that is used for the decorative layer. Therefore, on the shelves of stores they can be found as acrylic vinyl wallpaper.

Types and characteristics of acrylic wallpaper

The process of making canvases with acrylic is almost identical to the production of vinyl. It consists in the point application of an acrylic polymer to the base. The blanks go through a stage of high-temperature exposure, as a result of which acrylic, like polyvinyl chloride, foams and forms a beautiful relief.

Externally, the canvas is a surface dotted with many dotted swellings. Structurally, acrylic-coated wallpapers consist of two layers - a base and a decorative layer. Depending on the type of base, two groups are distinguished:

Acrylic paper wallpaper

This happens as a result of prolonged contact of the wallpaper with a moist adhesive environment. Moreover, water has a detrimental effect not only on the paper base, but also on the spraying elements. Therefore, freshly glued paper acrylic wallpaper should be immediately glued to the wall.

The advantages of such material are many. This is both a longer service life and less exposure to impacts. At the same time, non-woven fabric is an excellent reinforcing base.