How to clean an acrylic bathtub. How to clean and whiten a bath at home with soda, peroxide, citric acid? How to bleach enamel, acrylic and cast iron bath? How often to clean the bath

Ways to clean the bathroom from rust, limescale and yellowness.

A clean bathroom is an indicator of the cleanliness of the hostess of the house. This is one of the most frequently visited places where a lot of mold, dust and soap deposits accumulate. In places where the bathroom comes into contact with a faucet or drain, rust and scale often form.

How to clean a bathtub from rust?

Rust often eats into the surface of a metal bath and is difficult to remove. Many housewives solve this issue by purchasing expensive cleaning products. But, unfortunately, they also do not always cope with the problem perfectly.

Bathroom Cleaning Instructions:

• Take a glass jar and rinse it. Remove moisture and pour in 100 ml of ammonia
• Add 50 ml of hydrogen peroxide to the substance and stir
• Saturate the fabric with the composition and rub the dirt
• You can pour some of the solution on the rust and leave for 20 minutes
• Rinse with warm water, repeat if necessary

Rust is iron oxide, which is removed using acids and alkalis. It dissolves perfectly with ammonia, vinegar and special aggressive agents.

How to whiten a bath from yellowness?

Many housewives regularly use this method to clean sinks and bathrooms. The method is based on the use of wine vinegar and salt.

Instructions for removing yellowness:

• Mix in a glass bowl 100 ml of wine vinegar and 50 g of salt
• Put the dish in the microwave and heat the solution to a temperature of 70 ° C
• Dampen a cloth with liquid and rub the contaminated areas. Leave for 30 minutes
• Do not overexpose the solution, as it can damage the enamel

How to whiten an enamelled bath?

Such products are best cleaned with acid-containing solutions. In order for the product to work perfectly, it is necessary to warm the bathroom. Just dial into it hot water, pull it down and wipe it dry.

Only then apply the cleanser. Enamel should not be rubbed with abrasives and a metal scraper. From this, it can become covered with cracks. Dirt and mold often clog in these cracks.

Enamel whitening instructions:

• Heat up the item. It reinforces chemical reaction and cleanup is faster
• Pour concentrated vinegar or essence onto dirty areas
• Oxalic acid does an excellent job of removing dirt, but you should not apply it for a long time.
• Leave on for 15 minutes and rinse thoroughly with warm water

How to clean an acrylic bath at home?

Do not use abrasive compounds and powders to clean acrylic bathtubs. They scratch polymers and spoil the product. It is recommended to use compositions such as "Silit", "Domestos", "Cif". Substances with a high content of chlorine (Whiteness) should not be left for a long time, as they are absorbed into the pores of the polymer and cause it to turn yellow.

Cleaning instructions acrylic bath citric acid:

• Dissolve a spoonful of the substance in a glass of hot water
• Saturate the cloth with the solution and apply to the dirt. You can wipe the entire surface of the bathroom
• Rinse with warm water
• You can use special plastic bathtubs, this is Ryton, Eago, Ravak, Delfin

How to whiten a cast iron bath?

A cast iron bath can be cleaned with soda and abrasives. It is recommended to clean with liquid chlorine. Don't rub metal surface scraper, it destroys the coating.

Instructions for cleaning a cast iron bath:

• Rinse the item very hot water or boiling water
• Wipe with a dry cloth or towel
• Pour in some Whiteness or liquid chlorine. You can buy Domestos with chlorine or Hedgehog
• Leave on for 15 minutes and then rinse with warm water

How and how to clean the bath with folk remedies?

There are many ways to clean a bathroom from rust and limescale. Of course, it is desirable not to use techniques that destroy the enamel.

Bathroom cleaning options folk remedies:

• Mix salt with vinegar and heat. Apply the solution to the surface. Wash off with water
• Borax mixed with ammonia and apply on rust or dirt. Wash everything off after 15 minutes.
• Pour citric acid on the wetted surface and leave for 20 minutes. Wash the surface

How to clean an acrylic bathtub with vinegar?

Acrylic is a kind of material that requires careful maintenance. On its surface there is an antibacterial film that protects the container from the appearance of mold and bacteria. It is not necessary to use whiteness and aggressive substances for cleaning. Use proven and safe methods.

Instructions for cleaning acrylic with vinegar:

• Rinse with hot water, wipe dry
• Dissolve 20 g of salt in 100 ml of vinegar and put in the microwave. The temperature will speed up the process and you will get rid of the dirt faster.
• Pour the solution into the bathroom and leave for 20 minutes
• Wipe with a damp cloth and wash with water

How to clean the bath at home with baking soda?

Heat the tub with warm water and wipe dry. Mix baking soda with soda ash and apply to a damp bath. Leave the baking soda on and let the paste dry. Pour vinegar into a glass and pour it over the surface. Vinegar and soda will enter into a chemical reaction and the dirt will disappear.

You can use this way:

• Mix baking soda with water until you get a paste
• Apply the paste on the surface and leave for 20 minutes
• Scrub the surface with a sponge and rinse thoroughly

How to clean the bath with citric acid?

This method is used to clean cast iron and acrylic baths from limescale and rust.

Cleaning instruction:

• Moisten contaminated areas with warm water
• Pour in citric acid. It will adhere to a wet surface, forming a concentrated solution
• Leave for 25 minutes
• Wipe with a clean cloth and rinse

How to clean a bathtub with hydrogen peroxide?

Hydrogen peroxide is commonly used to clean bathroom stains. It is a weak acid that corrodes dirt. At the same time, the solution does not smell of anything and is completely safe for health, unlike chemicals.

Cleaning instruction:

• Mix ammonia and peroxide in a ratio of 2 to 1
• Apply the prepared solution to a warm and dry surface.
• Leave for 30 minutes
• If the bathroom is very dirty, you can leave a cloth soaked in the prepared solution on the surface.

As you can see, cleaning the bathroom from rust and yellowness is quite simple. It takes a little time and effort.

VIDEO: Cleaning the bathroom

Acrylic bathtubs have recently become popular and have taken the place of the previously widely used cast-iron structures. Such a product captivates with its lightness, as well as its sophisticated forms. But at the same time, quite often the owners of such plumbing do not know how to clean an acrylic bathtub so as not to harm its appearance.

What is acrylic?

For the manufacture of acrylic bathtubs, plastic is used, which is characterized by significant hardness and wear resistance. The surface of such products has a dirt-repellent effect, which prevents the development of harmful microorganisms. This material has been widely used in the field of dentistry in the past. Thanks to new technologies, its price has dropped significantly. Therefore, the material began to be actively used in the production of sanitary ware.

Acrylic bathtubs are resistant to impact, but are subject to small and minor scratches. Them high-quality cleaning depends not only on which cleaning agent was chosen, but also on compliance with the basic recommendations for the care of acrylic. For the bath to last long time and has not lost its whiteness and integrity, you should not bathe pets in it, as well as arrange a warehouse of basins and buckets. metal objects and other utensils can damage its surface, leaving noticeable scratches.

Acrylic Bathtub Daily Care

Acrylic bath does not require special care. Just rinse it clean after every use. running water without using aggressive cleaning agents. For acrylic baths, you can purchase special "chemistry". Of course, they also effectively fight pollution, but they are not cheap. In addition, it is not recommended to constantly expose the acrylic surface to chemical cleaning.

Many do not know how to clean an acrylic bath. It turns out that to carry out such cleaning, it is enough to purchase a soft cloth or sponge. It is also necessary to use soap or a special detergent for acrylic products. For daily care, it is enough to clean the surface of the bathtub with a soapy sponge to remove possible contamination. You can even just rinse it with clean running water and completely remove moisture. With such care, no traces of rust or plaque will appear on the surface.

If such pollution nevertheless takes place, then how to clean the acrylic bath in this case? If a conventional ways do not help, you need to pick up special cleaning products.

What care products to use?

Before we tell you how to clean an acrylic bathtub at home, we note that you need to remember some important rules. It is important to observe accuracy and discretion in the process of processing the product. Avoid using cleaners that contain abrasive elements, as well as pastes and powders with the presence of ammonia compounds, chlorine, alkali and acid. You need to be aware that such substances can damage the outer coating of the acrylic tank, cause small cracks and scratches, and provoke discoloration. Therefore, before deciding how to clean an acrylic bath, you should carefully read the composition of the powder or paste. Avoid using metal brushes. Cleaning tools that are too hard cause scratches and damage the finish.

Overview of cleaning products

Every hostess thinks about how to clean an acrylic bath. Fortunately, there are now a huge number special means. "Acrilan" - cleaning foam that easily removes Various types dirt (soap stains, limescale, rust). The tool can easily cope with all types of stains. The advantage of this product is the formation of a protective film on the acrylic surface, which prevents further accumulation of plaque. But never leave the foam to dry completely on the surface of acrylic products, and do not mix it with other products. Use gloves during cleaning. Keep away from children.

Cif is the optimal cleaning agent that is suitable for the care of all plumbing fixtures. The composition does not contain abrasive substances. Therefore, the acrylic surface is not threatened by the loss of gloss and integrity. The tool is available in several forms - cream, paste, spray.

Bass is a liquid for cleaning sanitary ware in the bathroom. Suitable for daily use.

Tim-Profi is a detergent designed for cleaning acrylic surfaces. Among the main advantages are environmental friendliness, the ability to destroy unpleasant odors, and the removal of significant contaminants. The agent gives the cleaned surface shine, and also forms a special protective layer.

"Cinderella" - effective drug for cleaning acrylic products. Perfect option for those who cannot decide how to clean an acrylic bath. Among the shortcomings is a pungent odor that appears directly upon spraying. In the process of processing, it is recommended to use not only gloves, but also a mask. The product must be sprayed onto the surface of the acrylic bath and left for 7 minutes. After the specified time, rinse the preparation with running water, wipe the bath with a soft cloth.

"Chister" - a cleaner for acrylic baths, which is also suitable for other plumbing items. Ideally removes limescale, rust, grease stains and soap stains, gently cleans the surface without causing mechanical damage. The composition of the drug includes an acrylic polymer, which acts as a barrier to further adhesion of dirt to the bath. The product protects against the appearance of fungi and bacteria. The bath will please the owners with cleanliness in a couple of minutes.

So, we discussed how to clean an acrylic bath. let `s talk about possible ways the use of detergents. Familiarize yourself with the basic rules for using cleansers. Usually the manufacturer places recommendations directly on the packaging. The basic rules of application are as follows:

Folk remedies for the care of acrylic bathtubs

If there are no detergents and you don’t know how to clean an acrylic bath at home, feel free to trust people's councils. Such funds do not have negative properties and do not harm health:

What do the owners of this kind of plumbing say? How to clean an acrylic bath? Reviews on this subject are very different. However, regardless of whether you read a positive or negative comment, you should know that all products correspond to the qualities declared by the manufacturer. It is important to choose the optimal detergent that is suitable for your bath, taking into account the characteristics and characteristics of the water. The effectiveness of the tool depends on the frequency of use. For example, when heavy pollution it may be necessary to use the preparation twice to achieve a perfectly clean surface. Taking into account all the above information, you can easily determine how to clean the acrylic bath so that the product lasts a long time.

Acrylic bathtubs are very popular among connoisseurs comfortable conditions. The innovative piece of sanitary ware is heat-resistant and does not corrode. Acrylic requires proper care. Cleaning a bathtub is not difficult if you do it daily. The main thing is to choose necessary funds. We will analyze the details in the article.

How and how to clean an acrylic bath without damaging the surface

Acrylic is a wear-resistant inert material. Widely used in the manufacturing industry. Acrylic plumbing looks chic, but there is significant disadvantage. The material is not very durable - easily damaged.

Daily care for plumbing will keep the bath in good condition. The delicate surface will not withstand caustic powder cleaners, abrasives, chlorine, alkali and acid. After such processing, scratches remain on the coating, and the bath irrevocably loses its original appearance.

Do not use brushes on metal base so as not to damage the coating. Do not place hard objects on the bottom of the bath: buckets, basins, stools. It is not recommended to bathe pets in an acrylic bath. Even a child can scratch the delicate coating, not to mention cats and dogs.

Care products for delicate sanitary ware should have a liquid consistency. In the absence of a professional tool, we will use, for example, shower gel.

We follow the sequence of actions:

• distribute liquid substance on the surface of plumbing with a soft sponge;
• wait five minutes until the surface gets wet;
• rinse with warm water, helping with a soft material;
• evaluate the result, if necessary, repeat the procedure;
• dry the bath with dry napkins;
• rub the surface of the plumbing with a soft cloth for shine.

Rules for the care of a delicate bath:

• After each use, rinse the plumbing item with warm water and a soft sponge.
• After cleaning the surface, wipe the bath dry.
• Do not soak dirty laundry in the container.
• Eliminate cleaning products containing unacceptable chemicals.
• Once every ten days, we treat the surface of the bath with approved chemical solutions.
• When bathing pets, lay a dense material on the bottom.
• At the time of buying detergent read the ingredients carefully.

Acrylic has a dirt-repellent property. Daily care will help maintain appearance baths for a long time.

How to properly wash an acrylic bath: video instruction

In a short video, a housewife shares the secrets of keeping an acrylic bathtub clean and tells you about the rules for caring for delicate sanitary ware. What detergent is best to use:

Acrylic bath cleaners. Is it possible to use Domestos

In specialized plumbing stores, you can get advice on professional products designed to clean capricious coatings:

A universal tool that allows you to tidy up the entire personal hygiene room. The composition does not contain abrasive elements. There are no difficulties in application. Spray the product evenly over the entire surface. Wait a few minutes and rinse thoroughly.

Team Pro

The tool is perfect for any acrylic surface. An environmentally friendly product will save plumbing from bad smell and from stubborn dirt. After processing Team Pro, a dirt-repellent layer is created on the coating, giving plumbing items shine and novelty.

Acrylan

Specialized foam that cleans acrylic sanitary ware from difficult formations and old stains. After processing on the surface of plumbing items, a protective film, which protects the delicate coating from the re-formation of water stone.

Cinderella

Inexpensive but good quality cleaner. The only downside is the pungent smell. Don't forget to use personal protection when processing plumbing. Spray the product evenly. We wait no more than seven minutes and rinse thoroughly with running water. We wipe dry with napkins. Cinderella It is also used for cleaning other bathroom items.

Chister

A versatile tool will tidy up the entire bathroom. It is used for gentle cleaning of a delicate coating from stains, grease, lime and corrosive compounds. The presence of an acrylic polymer in the composition protects the surface of the bathtub from contamination for a long time, giving shine to objects.

Frosch "Green grapes"

An excellent tool will please the hostesses with a gentle solution and a pleasant smell. It is used as an acrylic coating cleaner and enamelware. Frosch is bought by connoisseurs of environmental cleanliness. The composition of the product is safe for people and pets. There is a minus - it does not cope with persistent stubborn stains.

Hostesses are concerned about the possibility of using Domestos which gained popularity due to its ability to cope with complex pollution and blockages (see also -).

You can use Domestos, but with caution. The composition contains acids that corrode even the glassy coating. Pour the remedy on upper part acrylic wall. Using a soft sponge, distribute Domestos evenly over the walls of the container. Waiting time - no more than 10 minutes! We go over the sponge again and rinse thoroughly with running water.

If there is an opportunity to use another remedy, it is better to exclude Domestos!

How to get rid of yellowness and limescale

Yellowness on the delicate surface of sanitary ware is associated with the formation of lime or the so-called water stone. Complex deposits appear from the interaction of the coating with water of a specific structure.

To get rid of yellow plaque You can use professional tools, for example, Acrylan or Team Pro. Simplifying the task, we will prepare a cleaning acid solution ourselves.

Pour one or two liters of low concentration acetic or citric acid into the bath. Spread over the surface and leave for twelve hours. We rinse the plumbing with running water under strong pressure. Dry the surface with a dry cloth.

The acid procedure will protect the acrylic bathtub from complex plaque for a whole year!

Folk remedies

We will prepare cleaning solutions with our own hands.

Weak pollution we clean toothpaste. We apply the product to the dirt, rub it with a soft-bristled toothbrush. Rinse off with water and dry.

Stains and stains are removed baking soda, mixed with liquid soap . Apply the mixture to the contaminated areas, wait twenty minutes. Rinse and dry.

In the fight against limescale and rust the solution will go ammonia and hydrogen peroxide in equal proportions.

To get rid of light rust possible with the help baking soda . Prepare a mushy solution, apply to the coating. We wait twenty minutes. Wash off with water and dry.

old rust move away from saline solution . table salt put it on the stain. We use the reverse side of the sponge, previously moistened with turpentine.

Complex pollution purify with 1-2 liters acetic acid weak concentration, poured into a full bath of hot water. We leave until the morning. Drain the vinegar solution and rinse the container.

As an alternative, we will use 200 grams of citric acid. The procedure is carried out in a similar way.

What can not be cleaned

During the cleaning process, you can not use:

• powdered products;
• solutions for surfaces from another material;
• products based on formaldehydes, alkalis, formic and phosphoric acids;
• chlorine-containing products.

Acrylic sanitary ware decorates the bathroom. Before you buy a luxurious bath, think about whether there is time to take care of it. Capricious material requires daily attention! Try not to experiment. Buy professional cleaners.

How to wash an acrylic bath? Nowadays, acrylic bathtubs are becoming more and more popular. They are much lighter than cast iron, have high strength, reliability, aesthetic appearance.

Every housewife strives to keep the bathtub clean. It is not so easy, because high humidity indoors on the surface sometimes appear rust spots and water stone. They can only be removed with special cleaning agents.

How to clean an acrylic bath?

It is necessary to prepare:

• soft sponge
• soap or detergent for acrylic surfaces

Wash the acrylic bath as follows:

1. After using the bath, wet its surface with warm water.
2. Wipe it with a soft sponge, which is applied with soap or detergent for acrylic.
3. After thorough cleaning with a detergent, rinse it well with warm water from the shower.
4. Wipe with a soft cloth.

In order for the product to retain its shine and excellent appearance for a long time, it is necessary to carry out these activities every day.

It is much easier to prevent a problem than to correct the situation. Therefore, before cleaning the bathtub, it is necessary to conscientiously study the operating instructions for the bathtub. Usually, manufacturers advise which care products to use.

In this case, it is not necessary to choose a cleaning agent for a long time, and the product will not be damaged. Detergents for cleaning acrylic can be purchased from commercial enterprises that sell bathtubs or specialize in the sale of detergents.

Special rules for cleaning acrylic bathtubs

These methods for washing acrylic surfaces are not difficult to remember. To date, special chemical compositions for cleaning acrylic. They allow you to qualitatively remove the most difficult-to-remove contaminants from the acrylic surface.

How to clean an acrylic bath?

1. It must first be cleaned with a soft sponge moistened with an appropriate detergent.
2. Then wash with warm water.
3. It is necessary to apply a detergent to the stain to clean special dirt. After that, leave it for a short time.
4. wash away detergent composition warm water.
5. Rinse the surface well.

If the stain has not been cleaned after these measures, then you can restore the bathtub by applying liquid acrylic. It will allow you to gently wipe the dirt without damage.

Under no circumstances should abrasive cleaning agents be used to clean acrylic bathtubs. They can scratch smooth surfaces.

Do not use acetone, gasoline, substances that contain ammonia, acid or chlorine for cleaning. They corrode the surface, can change the color of the material.

Handy stain cleaners

In the absence of a special detergent, improvised means can be used.

Rust stains are removed with lemon juice or table vinegar.

For this you need:

1. Treat the stain with vinegar or lemon juice.
2. Wait 20 minutes.
3. Rinse thoroughly with warm water from the shower.

This way you can clean the acrylic bath.

In the event of scratches, the following measures can be taken:

1. Use soft sanding paper to carefully wipe the scratched area.
2. Apply polishing paste to the area to be treated.
3. Using a soft cloth, gently polish the surface.
4. Then wipe the surface with a clean cloth.

It is possible to remove contaminants mechanically only from a product in the manufacture of which cast acrylic was used. Therefore, first of all, it is necessary to read the operating instructions for the bath.

A real disaster is the appearance of lime deposits. To get rid of them, you must perform the following steps:

1. Pour water. Bring its temperature up to 25 °C. The volume of water must completely cover all lime deposits not less than 5 cm.
2. It is necessary to add 1.5 liters of a 7% solution of citric acid or vinegar to the water.
3. Then you need to mix the water and wait 12 hours.
4. After that, the water is poured out, the bathtub is thoroughly washed with running water and wiped with a clean, dry cloth.

This procedure must be carried out once a year.

Carrying out disinfection

The bath must be disinfected at least once a year. To do this, you need to perform the following actions:

1. You pour water into the bath. Bring the temperature up to 20°C.
2. Add detergents for cleaning acrylic to the bath, which have a disinfecting effect. You can buy them at household chemical stores.
3. Mix thoroughly and drain after 10 minutes.
4. Rinse the bathtub with running water to remove the remnants of antiseptics.
5. Wipe with a dry cloth.

Proper and regular maintenance can maintain the quality of acrylic for a long time and increase its service life.

The consumer market offers acrylic products of the most different forms. Four main groups: regular rectangular and corner baths, trays for shower cabins, containers for home hydromassage devices, containers for professional hydromassage complexes.

If you decide to purchase and, it would be logical to first familiarize yourself with how to care for her.

Most well-known firms - manufacturers of acrylic plumbing have developed and produced (as related products brand name) as well as cleaning products for their products. At the same time, they provide a guarantee of effectiveness and safety for the entire line of their products, provided that they are used to care for sanitary ware manufactured by the company. However, according to customer reviews, cleaning products from leading companies are of high quality, and most of them are interchangeable.

Acrylic bath care

Although acrylic is durable, repels dirt well and pathogens do not develop on its surface, you still need to take care of an acrylic bath. As a cleaning agent for acrylic bathtubs, you can use any liquid universal product that does not contain aggressive chemicals that are contraindicated for acrylic.

What Your Acrylic Bathtub Doesn't Like

• Laundry detergents and abrasive cleaners
• Ammonia, acetone, bleach, formaldehyde, and products containing them
• Hard and metal brushes, dry cleaning

The question of how to wash acrylic bathtubs is not very difficult. Their surface is smooth, so they are easy to clean. Rinse the acrylic bath after each use. warm water and wipe dry until next time. And with a more thorough cleaning, it is necessary to wash the bath with a soft sponge or cloth, applying a solution of universal or special detergents to the surface.

How to clean acrylic bathtubs

It is difficult to unequivocally answer the question of which acrylic bath cleaner is better, and which one to prefer. The list of manufactured products of most well-known manufacturers on the market includes a complete complex set designed for washing, cleaning, polishing, removing deposits and disinfecting such products.

The table shows the most popular acrylic bath care products.

	Tool name	Manufacturer	Qty, volume
1	Acrylan	"Bugs" (BAGI, Israel)
2	Mr Chister	"Nevskaya cosmetics", St. Petersburg
3	RAVAK Cleaner	Ravak (RAVAK, Czech Republic)
4	Tim Pro	Legia Lux LLC
5	Acrylic Polish	Acryl Polish (Kolpa, Slovenia)

It is better to familiarize yourself with the properties of these funds even before.

Acrylan

The first name from the list is remembered by the owners of acrylic baths easier than others, because it clearly indicates its purpose. In the CIS market in the last decade, the tool is quite popular - every second consumer, when asked how to clean an acrylic bath, will call you exactly it.

Acrylan acts quickly and effectively, copes well with soap residue, removes mold, cleans rust and lime scale. At the same time, its effect is gentle on the surface of an acrylic bath.

Acrylic is conveniently packaged, economical to use, with a built-in spray trigger. Many consumers consider its smell pleasant, some, on the contrary, perceive it as very sharp. In any case, you need to use the product with gloves and take precautions. After washing, the bathtub has a pleasant shine, because, when it dries, the product forms a thin film, which also serves as protection.

Mrs Chister

The composition of the relatively inexpensive and popular on Russian market The product includes a special polymer that cleans the bath well from grease, rust and lime deposits.

The tool has an antifungal effect and antibacterial properties. Convenient and half-liter packaging with a sprayer.

Rawak
The line of cleaning products from Ravak, a well-known plumbing manufacturer on the European market, is especially popular. All compositions developed by the company are adapted to the special conditions of cleaning bathrooms, where conventional cleaners and detergents are not always appropriate. RAVAK constantly monitors the quality of its products and guarantees their full compliance with regulatory documents.

• RAVAK Cleaner effectively removes grease, scale and lime residues.
• RAVAK Anticalc Conditioner - renews the action of the protective layer
• RAVAK Turbocleaner – effective remedy for cleaning acrylic bathtubs, which completely dissolves lime deposits in the siphons of acrylic bathtubs and shower trays made of acrylic.
• RAVAK Desinfectant is a surface disinfectant and care product for hydromassage systems.

Tim Pro

high tech professional tool Tim Pro is biodegradable. Like other cleaning products for acrylic surfaces, it does not contain abrasive particles, it effectively and quickly cleans even very old dirt, makes the surface shiny and leaves a protective film.

Acrylic Polish

Acryl Polish is a line of Kolpa products developed by a well-known Slovenian sanitary ware manufacturer for the care of acrylic bathtubs. Used successfully for polishing and repairing acrylic surfaces. The repair of acrylic bathtubs itself is simple, although it has some features.

Dealing with water stone

Water stone - lime deposits characteristic of acrylic - this is exactly what gives the owners of acrylic baths great inconvenience. The easiest way to get rid of it is "folk", with the help of available improvised materials. The cleaning process is as follows:

1. Fill the bath with water (20-25 degrees)
2. Pour one and a half liters of 7% solution of vinegar or citric acid into the water (pack)
3. With a jet from the shower or a bucket for water, mix the water in the bath and leave for 12 hours
4. We drain the water, rinse the bath with a shower.
5. We wipe the entire surface of the bath dry.

If lime deposits are long-standing, there are a lot of them, then for heavily soiled surfaces you will have to use the products offered by the chemical industry - try RAVAK Turbocleaner and Acrylan.

As you can see, the choice of products on the market is very wide, and the answer to the question of how to clean an acrylic bathtub is determined only by personal preferences.

Acrylic bath disinfection

Acrylic bathtubs require not only cleaning, but also disinfection. This procedure must be subjected to a bath once a year. Her stages:

1. Filling the bath with water room temperature(20 degrees).
2. We add a disinfectant in accordance with the instructions attached to the antiseptic. For this purpose, you can use the means of the Ravak line - RAVAK Desinfectant or Tim Profi.
3. Mix the water thoroughly, leave with the solution for 10 minutes.
4. Then we rinse the entire bath for a long time and thoroughly with water from the shower and remove the remnants of the disinfectant.

You need to work carefully and with gloves, and after the end of the procedure, ventilate or ventilate the bathroom.

In recent decades, acrylic bathtubs have absolute leaders sanitary ware market. The thermal conductivity of acrylic is much less than that of metal, and acrylic products are much "warmer" than their steel and cast iron counterparts. In a cast-iron bath, the water cools down by 1 ° C in 5 minutes, and in an acrylic one - only in half an hour. In addition, these baths will never require such a rather complicated operation as enamel restoration.

The main thing in the care of an acrylic bathtub is the regularity and knowledge of how and with what to clean acrylic bathtubs. Then she will serve you long years. Some manufacturers give a guarantee of up to 35 years for acrylic, from which ordinary and hot tubs as well as shower trays.

An example of a detergent for acrylic bathtubs