The company "Eco-Dom" offers turnkey houses made of profiled timber warm, beautiful, with convenient layout. For about 20 years we have been building comfortable housing in the Moscow region. We use own material, which is produced from high-grade environmentally friendly raw materials. Due to the fact that we ourselves produce profiled timber, the price of our houses is much lower than that of competitors.
House sets are produced according to design data at the Hundegger k3i woodworking complex. A powerful, fully automated center provides exceptional precision in processing parts, gentle impact on the workpiece. Parts are formed in one pass. The capacities of our production complex not only fully cover the needs of the company. Here you can buy profiled timber from the manufacturer inexpensively. The cost of 1 cubic meter is 11,000 rubles. The price includes:
We sell profiled timber chamber drying, which is preferred for construction for many reasons.
Advantages of chamber-drying houses
Profiled forcibly dried timber - natural material, the raw material for which is wood conifers. Therefore, for a house made of it, all the advantages of a wooden one are characteristic:
Investing in a house made of timber is a far-sighted move, especially if the possibility of selling it in the future is not ruled out. The price of a cube of profiled timber for the project is quite acceptable. Over time, the house gains strength, while retaining its visual appeal, functionality and excellent performance. Such real estate is always in price, is in demand.
We produce profiled timber 200x200(195x195), 150x150(145x145) chamber drying. We select blanks on plots located in the central and northern parts of Russia. Our production site is equipped with modern equipment. A stable mode is maintained in the drying chambers, the process is carried out automatically with the control of material moisture parameters.
Packaging, storage and transportation of the material is carried out in accordance with current rules. In a house set made of inexpensive profiled timber, each element is numbered. The material is delivered in bundles, each of which contains a list of parts. This makes it easy to recognize and select necessary materials depending on the stage of production.
A profiled beam of natural humidity is considered the most optimal, judging by the ratio of price, complexity of building construction and its operational qualities. Profiled timber of natural moisture is great for construction wooden houses and baths.
The main advantage of houses made of profiled timber DSK "Pine House"- this is the manufacture of a power kit (walls, beams) at home in the factory. The power set is a profiled beam, made according to the project, with connecting locks (bowls), grooves on the openings for mounting windows and doors.
The high quality of the surface treatment of the profiled timber of natural moisture allows it to be used without additional processing walls. A complex profile prevents the appearance of blown slots, the crowns are firmly attached to each other (thorn-groove), excluding deformation of the material during the drying process. Walls made of profiled timber of natural moisture, due to quality processing surfaces are even and smooth, which does not require the cost of additional facing materials and significantly saves money on construction. Profiled timber made of coniferous wood has a beautiful texture, pleasant color and aroma.
RUB 1,600,000 prof. beam 190x140 (130
) mm with delivery and assembly |
RUB 1,600,000 prof. beam 190x140 (130 ) mm with delivery and assembly |
85 0 000 rub. prof. beam 190x140 (130 ) mm with delivery and assembly |
The profiled timber of natural moisture has the disadvantages of all materials in this category:
Profiled timber houses |
Within three banking days from the date of signing the Agreement, the Customer shall make payments to the settlement account of our organization advance payment in the amount of 50% of the cost of materials specified in the Contract.
The rest of the amount for materials and advance payment for work is transferred within 3 banking days from the date of delivery of the house kit and building materials, as well as the arrival of our team at the Customer's site.
The final settlement between the Parties is made after the Contractor completes the work under the contract. (After the actual delivery and acceptance of the result of the work and the signing by the Parties of the final Acceptance Certificate of the work performed.)
(as of 01.09.2018)
Name | The size | Price for 1 m³, rub. |
---|---|---|
(wall set) | ||
rounded log |
F 180 | from 9,000 rubles/m³ from 8,000 rubles/m³ * |
F 200-260 |
from 9,000 rubles/m³ |
The production of profiled timber is located in the Orlovsky district of the Kirov region. The Kirov forest has long been considered practically a reference forest due to the peculiarities of the northern climate: the wood of this region has high density and strength.
Houses and baths made of profiled timber are distinguished by their excellent appearance, are built very quickly on site, while they have all the advantages of houses made of natural wood: structures made of profiled timber perfectly retain heat in the house and are as environmentally friendly as possible.
The Finnish Production Line MAKRON, which makes it possible to produce profiled timber of the highest quality with very high productivity.
Technological lines Makron (Finland) on the basis of Logmatic machining centers are designed for efficient and accurate implementation of all wall beams with a maximum section of 300 × 300 mm and logs with a maximum diameter of 300 mm required by house projects. Machining centers Logmatic have a unique performance - from 250 to 1000 running meters bars per shift.
The CNC of this equipment allows you to use standard files of popular CAD programs, which allows you to achieve maximum processing accuracy and minimize waste.
The plant produces timber of both natural humidity and chamber drying.
And rafter base roofs.
We build houses for any budget (economy class, luxury houses) and needs. The main material - a bar of natural moisture and chamber drying is carefully calibrated and meets the standards. The quality of wood and finished moldings is constantly monitored in production.
Houses shrink a little (3-5%), they can be built in 1-2 months.
The structure assembled from a bar does not warp.
The houses are aesthetically pleasing.
The material does not deform along a helical line.
When mounting walls, there are no gaps between adjacent elements.
The erected houses do not need to be caulked, it is enough to seal the seams with sealing gaskets.
The logs have a smooth surface, so the walls do not need to be sanded and the exterior finish can be dispensed with.
Under construction, you do not have to equip a heavy foundation, a strip or column foundation is enough.
The material is cheaper than round logs and glued beams.
Section 145 × 95 mm
The material is ideal for the construction of lightweight structures: country houses seasonal use, gazebos, outbuildings, etc. If the material is used to build houses for permanent residence would need additional insulation. Houses are insulated from the outside, insulation material located as close as possible to the cold side of the wall. In one cubic meter of lumber with a section of 145 × 95 mm - 11 pcs.
Bars of lower height are suitable for erection interior partitions. They can be attached to bearing wall using grooves or locks, they will not do any harm to its strength. Quality finish bars will change internal design premises and improve soundproofing properties floors.
Section 145 × 145 mm
The material can be used for the construction of residential buildings in regions with a warm climate. At low temperatures material sharply loses its heat-preserving properties. If the owners of a house located in an area with a temperate continental climate want to live in it year-round, they will need additional installation effective systems insulation and heating. In one cubic meter of lumber - 7.4 pcs.
Section 195 × 145 mm
A bar with such a section is the best value for money. It costs less than a bar with a section of 195 × 195 mm. At the same time, it has good thermal conductivity.
The material is suitable for the construction of a residential building and a summer residence intended for year-round living. Due to the thickness of the beam of 195 mm, the walls will not freeze through and let the cold into the building. Also, timber can be used for the construction of baths. In one cubic meter - 5.5 pcs.
Section 195 × 195 mm
The material is intended for the construction of solid residential buildings and luxury cottages. If construction is carried out in middle lane Russia or in the southern regions - additional insulation of the building is not required. The material is very durable and has good thermal conductivity; furniture and decor elements can be securely fixed on it.
A beam with such a section is more expensive, but the costs incurred are fully justified. It has good moisture-proof characteristics, so mold and fungus will not appear on the walls. Strong walls are able to withstand increased loads. In one cubic meter - 4 pcs.
you lived most life in the city, and over time began to notice that the hustle, noise, poisoned air made your life unbearable? Do you want to live in a place where you can breathe clean air while enjoying the silence? Then you should get your own cottage. And wood is the best for building. And not just a tree, but. This material has a number of advantages not only over concrete, reinforced concrete and brick, but also over ordinary tree. And this is worth talking about in more detail.
Many people who are at least a little interested in construction know about the advantages of wood. High heat-insulating and sound-proofing ability, ecological purity, low weight - all this distinguishes wood from brick and concrete. However, the tree also has certain disadvantages.
For centuries, builders and scientists different countries puzzled over how to rid the tree of these minuses. And it became a solution. It retains the advantages of the tree, but at the same time it is completely free from the minuses.
To begin with, the timber is impregnated with special substances that reduce its combustibility. The beam can lie in a hot flame for several hours, char, but never catch fire. Therefore, it is completely safe from a fire point of view.
Since it is used during construction, you can not be afraid that a few months after the construction of the house, the building will shrink strongly. The beam is already dried up to optimal humidity. Moreover, this is done subject to a number of rules, which eliminates the likelihood of cracks on the surface of the logs.
It is important that today you can buy profiled timber for the project- Dozens and even hundreds of companies throughout our country offer their customers such a service.
If you have a house project that suits you completely, you can contact a company that builds wooden houses and conclude an agreement with it. Specialists in a few weeks will be able to bring a project of almost any complexity to life. They will assemble a house according to your project, using, thereby significantly reducing the cost of the material. When the house is built, its details will be marked and the house will be dismantled again. After that, you can pick up the kit to carry out the entire construction yourself or hire specialists to do this work. You can also use the services of builders from the company where the house was assembled for you. This will save you additional funds (complex work is always cheaper than the sum individual works building a house).
Building a house on your land plot can be completed in 2-3 weeks. It will take some more time to finish. In any case, no more than a few months will pass, and you will be able to move into your new house. Of course, it will not work to build a house from concrete or brick in such a short time.
So, regret what you ordered profiled timber for the project, you definitely don't have to.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom