Tool for removing old paint from wood. Wood paint remover: an overview of homemade and ready-made chemical compositions

Faded or cracked paint on wooden frame although it gives the house a vintage look, it is in no way its decoration. Of course, unless it's a design idea. To learn how to properly remove old paint from wood, read this article.

Peculiarities

Withdrawal old paint with window frame, doors, old furniture and others wood flooring requires certain knowledge and skills. How to determine that such a procedure is really needed?

• It all depends on the number of layers on the wood. If the previous paint was applied in one layer, you can start painting without removing the coating. It will be enough to go over the paint with sandpaper until the shine disappears, and the old coating acts as a primer. It is important that the product is free of paint streaks and flaws in the texture, then the fresh paint will lay down in an even, beautiful layer.
• a huge role plays the color of the previous coating. If you want to apply light paint over a dark layer, remember that the shade will most likely not turn out the way you want. In this case, the best option is to apply two or more layers of paint.

Please note that if the product was painted more than 5 years ago, then, most likely, cracks and swellings have already formed on it. Besides, modern materials differ from previous analogues not only in quality and color fastness, but also in texture. In such a situation, the coating will have to be completely removed.

Types of coatings

There are several types of paints and varnishes for wood. Before removing old paint from wood, it is worth determining what type of coating it belongs to. This will allow you to choose best way its removal.

The most popular coloring agent wooden surfaces was and remains water-based paint. It is characterized by matte colors, moisture-repellent properties, a wide color palette and an affordable price. Water based paint is waterproof and non-waterproof. The first is quite difficult to remove from any surface.

To determine which water emulsion the product is covered with, moisten it with water and leave it for a while. If cracks and peeling are observed, then the tree is covered with non-waterproof paint.

No less popular are water-dispersion (or latex) paints. They are most common in the construction industry, and all thanks to the many advantages. latex paints absolutely harmless, have a rich palette of colors, fireproof. They are characterized by high coating strength, are effective protection from fire.

For coloring decorative elements Acrylic paints are often used from wood. There is even a special stained acrylic that can be applied to glass, wood, plastic and even fabric. Acrylic paints contain water, coloring pigment, acrylic acid and a film former, which contributes to the rapid solidification of the layer.

Acrylic coating is able to withstand severe frosts, and the brightness of the color is maintained even after many years.

Previously, they were leaders in paint and varnish products oil paints Today they are slowly becoming obsolete. Their lack of demand is due to toxicity, bad smell, the complexity of application. If the tree is covered with oil paint, no other paint will stick on top.

Often, whitewash is used as a coating for wood, which at all times was considered an excellent antiseptic. Whitewash protects walls well, disinfects the air. Today it is used mainly for processing hidden wooden parts: floor beams, floor joists, rafters.

Process technology

There are three ways to remove old paint from wood:

• mechanical;
• chemical;
• thermal.

The mechanical method of removing paint from wood products can be done manually or with the help of special tools. Everything necessary materials and tools to get the job done, such as sandpaper or a spatula, you can easily find it at your nearest hardware store.

It should be noted that oily materials quickly adhere to the abrasive coating, so the mechanical method of removing such a coating would be too costly.

When choosing sanding paper, pay attention to its grit. Coarse-grained nozzles contribute to the formation of depressions and scratches in the wood. Such paper is best used if the coating consists of several layers of paint. Change the nozzle as soon as the tree starts to show. Remember that such work should be carried out on a dry surface, always observing safety precautions.

The chemical method of processing involves the use of special acids and solvents, which should be selected taking into account the type of old paint. Manufacturing companies claim that these products ensure the dissolution of any paint, regardless of its prescription. However, as practice shows, such liquids are able to actively fight only with a fresh coating (up to 2 years ago).

Chemical reagents Ideal for removing acrylic and water based paints.

Using chemicals, the surface of the product is covered thin layer liquids. Need to wait a certain amount of the time indicated on the package - this will allow the old paint to soften and it can be quickly peeled off the wood with a conventional spatula.

When working with chemical compounds, it is necessary to take care of the ventilation of the room or to remove the coating on the street. You need to work in overalls, a respirator, goggles and rubber gloves.

The thermal processing method is suitable for removing paints based on oils or drying oils. Judging by the name, it becomes clear that the treatment involves heating the coating until the layers of paint soften. Heating is usually carried out using a building hair dryer or iron.

thermal effect perfect option if the paint has been applied for years. With prolonged heating, even a too hardened coating will soften.

It is worth noting that when heated, toxic substances will begin to be released, so put on a respirator during work and open the windows.

Training

If the ceiling and walls are painted with a non-water-resistant emulsion, the room must be prepared before work is carried out:

• floor, furniture, decor items and even stretch ceiling cover with foil or newspapers;
• prepare protective clothing, goggles, gloves, a respirator;
• prepare a container with warm water, if the processing method so requires;
• prepare in advance all the tools that you may need.

When removing an old layer of paint from plastic, it should be preheated to 60-70 degrees. It is better to postpone such operations for summer time in order to exclude plastic deformation due to temperature differences.

For surface heating during heat treatment often use a building hair dryer. Under the influence of hot air, blisters form on the coating, which will facilitate the removal of the coating.

When staining wooden windows paint drops often fall on the glass, removing them, in fact, is not so simple. Removing paint from glass surface requires special skill. Usually small dirt can be simply scraped off, but this requires accuracy. You can heat up the glass a little. building hair dryer, this will help soften the already hardened paint.

Some experts use foil: a layer of foil is applied to the glass, and a heated iron is gently passed from above. This method will allow you to remove even large smudges.

Often, during paint work, drops of paint fall on metal surfaces. Removing paint from metal also requires pre-training. First, the surface must be cleaned of dust and dirt, otherwise the process may slow down significantly. In addition, before carrying out this operation, it is desirable to dismantle the elements that may be damaged during cleaning.

What can be processed?

Usually wood is treated with various chemical compounds that exfoliate upper layer coatings. If the wood is covered with shellac, then it will be more efficient to use ordinary denatured alcohol.

It is good to process a single coating with liquid formulations. But powder products are suitable for processing a large area.

Tip: to clean the paint from the surface, use a spatula, after rounding its edges with a grinder - there is a risk of damaging the tree with sharp edges during the procedure.

Coating machining is one of the most effective ways to remove paint. It can include stripping with sandpaper manually or with the help of grinder(diamond cup).

How to delete?

In addition to the above means, special chemical washes are often used, which include dimethyl chloride, formic acid and other organic substances. Such reagents are distinguished by a rapid decomposition process, therefore they are considered practically harmless.

Important! A chemical remover copes quite well with a water-based emulsion: if the product is covered with one or two layers, it will be easy to wash it off with a store-bought reagent.

Painting a room can be associated with a number of unpleasant moments, and if you set out to organize it really efficiently, then you need to without fail take care to remove the old layer of paint.

Why is it necessary to remove the old paint layer? If you neglect this moment, the new layer of paint will not stay on the surface for long enough. After a few weeks or months, you can be prepared for the fact that the paint may begin to fall off or swell. Anyone interested in quality painting should rule this out.

What is the best tool for removing old paint from wood today?

Wood coatings have a special structure, so it is impossible to recommend absolutely all cleaning products to remove old layers of paint. When it comes to the use of specialized chemicals, then here you need to carefully study their scope, which is indicated on the label. Many of them are universal in terms of coverage of materials, and are suitable for both metals and concrete, and for wood, but there are exceptions. The DOCKER Wood tool, which is increasingly used by modern firms, is recognized as very effective.

The heat treatment method copes quite well with the elimination of the old layer of paint. What is it? Certain small areas walls or other surfaces are heated, causing the paint to soften. In order to most effectively remove the heated layer, it is best to use a spatula. To implement this procedure, a building hair dryer is well suited. Hot air can cause the paint to start bubbling, and this is a sign that you did everything right. The spatula must be worked very carefully so as not to damage the tree itself.

A recognized "folk" remedy for removing old paint from wood is caustic soda. This method does not require almost any financial costs, and allows you to remove the old paint quite effectively. Caustic soda must be mixed with water, after which it is best to add oatmeal. This will lead to the formation of a consistency somewhat reminiscent of a paste. This consistency should be applied to the area with the old paint, after which it will slowly begin to bubble. Now you can safely remove the old layer. After this procedure, it is best to wipe the fresh surface with water. This method cannot be called the most common, but in this case you will not have to resort to buying any additional or specialized chemicals.

Despite the variety of methods that can be done at hand, we still recommend using specialized tools to remove old paint from wood. They win both in efficiency and in the time it will take to remove old layers of paint.

How to remove old paint from wood? This question is asked by homeowners when renovating a home.

It cannot be answered unequivocally. Different compositions of paints are removed in different ways. Some are quite easy, but it happens that even experienced builders do not know how to remove old paint from a tree?

The article suggests some methods for removing old paint from the surface, their advantages, and safety measures during work.

IN Soviet period when decorating the interior, it was very common to paint the walls in bathrooms and kitchens. Many people are still faced with the problem of how to remove the old coating from walls, ceilings and floors, for example, to level the surfaces before new painting(see) or laying ceramic tiles.

If the wall will be sewn up with drywall, the old coating can be left. But more often it is necessary to remove it from walls and ceilings.

This is due to the fact that:

• Adhesion or adhesion of the painted surface to tile adhesives, cement-based plasters and other building compounds is practically zero. This means that applying a new paintwork on top is a waste of money, the coating will not last long.
• After removing the old coating, right technology finishing, improving the quality of the painted surface.

What are the ways to remove the old coating

When choosing a method for removing paint, there are several factors to consider:

• The type of surface on which the paint has been applied.
• What do you plan to do with it next.
• Type of paint.
• Number of coating layers.
• Adhesion strength of paint to the base of the wall.
• What tool is available.
• Owner's funds.

The paint on the wall can be:

• Water emulsion.
• Acrylic.
• Oil. This type of coverage concrete surfaces the hardest to remove.

Tip: If you do not know what type of paint is applied to the walls, you can find out. To do this, several experiments should be carried out: remove the coating on small plot surfaces using different methods.

Prepared, depending on the removal method used, tools and materials:

• Wide chisel, metal scraper or spatula.
• Liquid with special chemicals for removing a specific type of paint.
• A brush, you can use a roller.
• Ax for making notches.
• Building hair dryer.
• Electric drill with various attachments.
• Bulgarian.
• Pure water.
• For human protection, a respirator, gloves, goggles.

It is most difficult to remove oil paint from walls and ceilings if plaster has been previously applied to them.

You can remove the paint in one of three ways:

• Chemical.
• Thermal.
• Mechanical.

It is up to the owner to decide which means to remove old paint from wood.

How to remove old paint chemically

Work procedure:

• Acquired and prepared chemical composition, for which the instructions for removing paint are carefully studied.
• The solution is applied with a brush or a special roller to the surface. In this case, the movements must be made in one direction.
• After the time has elapsed, when the paint softens, it is removed with a spatula, scraper or with a metal bristle brush along with a wash.

Tip: This is the best fast method but the smell may remain for a long time. In addition, if the paint has been applied in several layers, there is no guarantee that perfect removal will be obtained immediately when using a remover. In this case, the solution should be applied several times.

The use of chemical reagents for removing paint has quite a few disadvantages:

• It is highly toxic, with a sharp specific persistent odor material.
• May cause burns on contact with human skin.
• Requires special disposal, it can not be lowered even into the sewer.
• The high cost of the process.

If chemicals are used, be sure to follow the safety rules at work:

• Handle reagents only in a well-ventilated building.
• Use personal protective equipment.
• It is impossible for children and pregnant women to be in the room.
• All parts of the body must be completely protected from chemicals: the mixture of acid and solvents has a very aggressive composition.

A more gentle method is the use of soda ash.

In this case:

• The wooden floor is well wetted with water.
• A thick layer of soda falls asleep.
• Everything is covered with wet burlap.
• The coating is maintained for 24 hours, not allowing the burlap to dry completely.
• After swelling from dampness, the paint is easily cleaned with a spatula.

You can remove old paint with your own hands with a mixture of lime and potassium carbonate.

For this:

• Take 1.5 kilograms of quicklime and 500 grams of potassium carbonate or soda ash.
• Everything is thoroughly mixed with water until thick.
• The mixture is applied to the surface.
• Aged 12 hours.
• Old paint can be easily removed.

Oil paint can be removed with liquid glass:

• The surface is lubricated.
• It dries up nicely.
• The silicate film should then begin to fall off along with the paint. The procedure should be repeated several times.

How to use the thermal method

The use of a building hair dryer to remove old paint has long been known.

With this method:

• The tool heats up the previously painted surface until it softens.
• With a scraper or spatula, soft paint is peeled off the wall, floor or doors.

Tip: In the absence of a hair dryer, you should take a wide sheet of ordinary foil and heat the paint through it with an iron.

This method cannot be used in places where electric wires pass or there is decorative coating, for example, plastic: it can be damaged from high temperatures.

But this method answers the question of how to remove old paint from wooden windows, when no vibrations and shocks are allowed. A significant disadvantage heat treatment is the presence of a pungent smell of paint and the release of harmful toxic substances when heated. This requires reliable respiratory protection, and use the method only in a well-ventilated area.

How to remove paint mechanically

In the case when it is impossible to use due to toxicity, the previous methods are most the best option will use mechanical method paint removal.

This is a laborious, rather slow, but inexpensive way. It is non-traumatic and not harmful, it is performed by notches on the walls with an ax.

In this case:

• Notches are made with an axe.
• The wall is splashed with water.
• After a few minutes, when the paint is absorbed, you can begin to clean off the paint with an ax. For the speed and efficiency of the process is selected correct angle tool tilt.

This method is best used in a room with a small area, and if it is not possible to ventilate the room, this perfect way. You can also use mechanized mechanical paint removal.

To speed up the mechanical removal of the coating from the surface, facilitate work and increase its productivity, it is worth using a mechanized method. To do this, take a grinder with a wide circle. How to perform paint removal with a grinder shows the video in this article.

The paint can be removed using a perforator with different nozzles:

• Nozzles on a drill - chains.

• This method allows you to remove paint and rust from surfaces made of concrete, wood and metal.

Chains can be of two configurations:

1. paint removers;
2. in the form of a roller. Such a nozzle is a chain consisting of 13 links, the thickness of which is not less than five millimeters. The link located in the center on each side rotates six links. The axis on which the link rotates is the M6 ​​bolt. The chain is put on and well clamped with a nut. An electric drill causes the chain to move.

If the extreme link flies off on one side, it is necessary, in order to maintain balance, to remove it on the other side as well. The paint is peeled off until there are three links on each side. After that, it is thrown away and a new one is put in. The chain chipped off the paint.

• Brick crowns are often used as nozzles, as in the photo.

How acrylic paint is removed

To remove acrylic paint, you can use:

• A good metal brush.
• Coarse-grained skin.

Tip: This handwork Don't forget to protect your hands by wearing gloves.

Good quality paint will not come off too easily. In this case, it is better to use the removal methods as for oil paint. When painting acrylic paint on previously applied to the surface of the same composition, cleaning can be omitted, it fits well on any acrylic paint.

What methods are best not to use to remove paint

When cleaning a wooden surface from paint, do not use:

• Thermal method, which uses an open fire. Otherwise, it will cause a fire.
• Chemical washes in rooms that cannot be ventilated.

Whatever method is used when removing old paint, we must not forget about the measures personal protection hands, eyes, faces.

One of the most effective ways to remove old paint from wood is to use a chemical remover. The cleaning agent reacts with the paint material, resulting in softening and foaming of the coating. The main advantage of chemical washes over other methods (mechanical, thermal) is that their action is more gentle on wood.

Variety of washes

All types of washes are divided into two large groups: universal and specialized. Universal compositions are designed to remove any paints and varnishes from wooden surfaces. They are able to dissolve paints and varnishes (LKM) both based on water and containing organic solvents.

The purpose of specialized washes is to soften only certain types colors. For example, there are separate washing compositions for removing textured, oily and other types of paintwork materials. Specialized washes are considered more effective, as their development takes into account the features specific types coloring substances. At the same time, specialized formulations are more expensive.

Washes are produced in the form of liquids, jellies and solids for further dissolution. When choosing a washing composition, it is necessary to proceed from the circumstances: for example, jelly-like paste adheres well to wood, and therefore will not drain from vertical surfaces.

But liquid flush compositions - the best choice if you are cleaning a surface that has small parts or fine threads. If we are talking about expensive furniture (especially veneered), you need to choose a liquid that can be removed with white spirit, because if this is not done in time, the wood fibers of the product will swell.

Before buying a wash, it is recommended to carefully read the instructions (usually it is stated directly on the package) or consult with a sales assistant. It should also be noted that not every drug is suitable for working with wood. Therefore, it is important that the cleaning composition is intended specifically (or including) for wooden products.

Instructions for using the wash

The work consists of two stages: preparation and application of the wash.

Preparatory activities

Before you start removing the paint, you need to prepare the surface. To do this, you will need to perform the following actions:

1. We remove dust and dirt from the surface.
2. Close plastic wrap floor and all non-wooden parts on the product.
3. We carefully wipe the wood - it should become dry.

Applying a wash composition

The work is done in the following order:

1. Wet the brush in the preparation and treat the surface with it.
2. We wait for 30-45 minutes so that the composition soaks the wood well.
3. We make an attempt to remove paint in any area with a scraper. If it works, we continue to clean the surface mechanically.
4. If the coating does not lend itself, stop trying and apply another layer of the washing composition.
5. Usually two soaks are sufficient. We separate the paintwork with a suitable tool: a scraper - for flat surfaces, a scraper - for shaped profiles, a wire washcloth - for carved parts. In the case of carved oak, we use a nylon sponge with an abrasive material, since the metal stains this type of wood.
6. We separate the paint along the fibers, but not across. To neutralize the washing composition, we wet the wood with white spirit.
7. We complete the removal of the coating by wiping the surface with a damp cloth.
8. Rinse wood with warm soapy water. This way we degrease the material.
9. We let the product dry, after which it can be applied with a primer and paint.

Wash composition example

As an example, let's analyze the possibilities of Docker Wood, a popular paint remover from wood among consumers. The composition is fast-acting: the effect occurs within 5-15 minutes. It is possible to qualitatively remove many types of coatings, including water-dispersion, oil ones. For example, "Docker Wood" copes well with pentaphthalic enamels of such markings as 115,133 and 126. The preparation contains special components that protect the wood from damage during paint removal.

Advantages of "Docker Wood":

• versatility in relation to paint and varnish coatings;
• economical consumption (about 200 grams per square meter);
• gentle effect on wood;
• deep penetration that has great importance when removing a multilayer coating;
• speed;
• lack of toxicity;
• fire safety;
• the drug retains its qualities even after repeated defrosting;
• complete absence of smell;
• the flush works even when sub-zero temperatures(down to -7 degrees Celsius).

Note! Before use, as well as in case of defrosting, the drug must be well stirred.

Application methods

Before applying the composition, prepare the surface. We remove dirt and dust with water and detergents. Washing material can be applied manually (brush, roller) or by immersion.

If selected manual way, apply a wash with a brush or other tool with a layer of 1-2 millimeters. After some time (5-15 minutes), remove the peeling paint with a jet of water or a spatula. We apply another (control) layer of wash and, after waiting for a while, clean the surface again. If the paint does not give in, more than two layers of the cleaning composition can be applied, however, it should be remembered that the maximum contact time of the wood with the preparation is 2 hours.

Note! Do not leave the wood to dry if the cleaning compound is not removed from it.

The coating can also be removed by immersion. To do this, “Docker Wood” is poured into a dish of a suitable size and immersed there wooden detail. After 5-15 minutes, remove the paint layer in the same way as described above. In case of dipping total time the presence of wood in the wash should not exceed half an hour.

Safety

When working with Docker Wood, extra precautions should be taken:

1. Do not forget about the use of protective equipment against acid damage (goggles, apron, respirator, gloves).
2. In case of contact with the skin or eyes, immediately rinse the affected surface big amount water and, if necessary, consult a doctor.

Storage Features

"Docker Wood" can be stored in intact packaging at temperatures ranging from 0 to 30 degrees Celsius. The drug retains its qualities for a year from the date of manufacture. If the package is opened, the wash must be used within 24 hours.

Alternative ways

In the absence of a proprietary washing composition, other preparations can be used. Below are some instructions for using the various .

You can use both ordinary caustic soda and a solution that, in addition to soda, includes oatmeal and water. When using this chemical, do not forget about safety precautions (safety glasses, gloves).

Instructions for using caustic soda:

1. We dilute soda in containers with water.
2. The solution is applied with a wide brush. It is necessary to distribute the wash consistently, without gaps on the surface.
3. We are waiting for the soda to soak the wood. After a while, the baking soda will begin to corrode the paint, and the coating will blister.
4. Remove the paint layer with a metal spatula. If there are pits on the surface, you can use a chisel, a small spatula, or a piece of sandpaper.
5. We wash the wood first with soapy water, and then with a stream of warm water.
6. We dry the material well before priming or painting it.

If the paint layer is thick or there are hard-to-reach places, it is more efficient to use a thick composition. You can achieve density by mixing baking soda with oatmeal in water. The waiting time after applying the solution to the tree is approximately 1-2 hours.

Chlorine can be used both as an independent paint remover and as an addition to the wash. In the latter case, bleach acts as a bleach. The fact is that after removing the paint, rotting or damage by a fungus will be found. In such cases, stains are inevitable, which bleach will help to bleach.

The paint is removed as follows:

1. Dilute bleach in a container with water.
2. Apply the chemical to the surface using a hard brush or steel wool.
3. As the bleach evaporates, the wood will gradually dry out.

Note! Work with bleach is possible only in conditions of good air circulation and using personal protective equipment.

Other cleaning methods

When choosing a paint removal method, the principle of “like to remove like” should be taken into account:

1. Paint on water based can be removed with warm water, a stiff brush and rags.
2. Oil coatings (paints based on fir or linseed oil) can be softened with turpentine. However, if the layer is thick, this will not be so easy. Oily paint coatings the hardest to remove.
3. Enamel paints begin to peel off after surface treatment with acetone or other solvent.

Precautionary measures

As mentioned above, when working with chemicals, it is necessary to follow safety regulations. These rules include not only the use of a respirator, goggles and gloves, but also other recommendations, including:

1. Good lighting in the workplace helps to avoid injury.
2. For processing of dimensional products it is necessary to use durable table or other flat surface.
3. Small parts (bars, strips, etc.) are more convenient and safer to process if they are stationary, for example, clamped in a vice.
4. Goggles are needed not only to prevent paint drops from getting into your eyes. When working with powder coatings, pieces of dry paint that have bounced off the surface to be cleaned may get into the eyes. These pieces are very sharp and can injure the organs of vision.
5. Also, do not forget about right choice shoes. It is better if it is old unnecessary shoes. Its material must be strong enough.
6. Some washes can be flammable. Therefore, you should work away from open sources of fire or heating equipment. Fire extinguishing equipment should be located in the immediate vicinity of the workplace.
7. The best place for cleaning is the street. If this is not possible, it is necessary to ensure good air circulation in the room.

Note! New generation flushing solutions are different high level security, they do not emit harmful substances. At the same time, it should be understood that the effect on the paintwork of such washes is softer.

Branded washing composition - the most effective method removal of paint and varnish composition from the wood surface. Working with such a drug does not require any special skills, but you must strictly adhere to safety rules in order to avoid damage to the skin and eyes.

If the building is made of wood, you must protect the material with paintwork material(hereinafter referred to as LMB). It will prevent impact on the surface external factors and give it a more attractive and presentable look.

But even the highest quality coatings eventually lose their properties and need to be replaced with new ones.

But how to remove varnish and paint without damaging the wood?

Without LMB processing, this natural material will quickly become unusable, so to maintain the durability of the building, you need to process the walls. If you want to renew an old coating, be sure to remove it before applying a new one.

How to clean wooden house from old paint? The task is not easy, but with the right choice of method, you will cope with it. This material is quite soft, so damage may remain on it, be as careful as possible when working!

If the coating layer is old enough and has already begun to separate from the surface, its removal will not be difficult. In this case, a spatula is enough, pry the paint off with it and slowly remove it. The method is economical and simple, but it will take several hours.

How to remove paintwork from a wooden surface:

mechanical method

You can use both regular sandpaper and a spatula. There is a risk of scratches on the walls. This method suitable if the material is already swollen and separated in some places. If the paint adheres firmly, choose a different technique.

The disadvantage of using tools is that the work is painstaking and lengthy, besides, they only remove part of the coating and you will have to additionally treat the surface. In addition, there is a risk of damage to the walls.

Temperature method

First, the surface is heated with a hot air stream, after which you can proceed to remove the old layer using mechanical tools. There is a risk of damage to the base under the influence high temperatures. Experts advise using a building hair dryer or iron.

Chemical method

Effective and suitable even for beginners. Paint wash may have different composition, when choosing, be guided by the type of paintwork used. Before carrying out the procedure, be sure to protect the skin and mucous membranes with tight clothing, a respirator, gloves and goggles.

If it is not possible to buy a ready-made wash, prepare it yourself. For this you need caustic soda. Mix it in water and stir until dissolved. Add oatmeal or wheat flour here, you should get a mixture that resembles a paste in consistency. Apply it on the painted surface and leave for 1-2 hours, then remove it together with the paint with a spatula.

Which of the following methods will you choose? If the paintwork has already begun to separate, stop choosing mechanical way. If you need to process flat surface, use a building hair dryer. For the fastest removal of the old layer, chemicals are ideal.

DOCKER Wood - paint remover from wood.
Effectively removes paint coatings ( water-dispersion paints, oil paints, enamels PF-115, PF-133, PF-266, GF-021, etc.) from wooden surfaces. Deep penetration wash. gel solution.
A special additive allows you to save the structure of the tree without damaging the surface of the wood.
Without smell. Fast action (5-12 min.)