How to wash the walls: the nuances of caring for different coatings. How to wash a wooden floor after painting with enamel

What should I wash the floor after painting so that it shines and does not stick? What should be the care of the painted surface?

Answer

Each of us, probably faced with painting the floor, and knows that this is a rather difficult task. How do you want the surface to remain bright and shiny longer! This effect is not difficult to achieve if you follow certain requirements for washing the floor.

First of all, you need to let the surface dry well. Modern floor paints dry quickly enough - within 24 hours. But it is advisable to wait another day for greater certainty.

The first wash is carried out with a very warm vinegar solution (2 tablespoons of vinegar per 8 liters of water) and a soft cloth. The procedure is carried out twice. Further, during the week, wet cleaning carried out daily to remove various oil traces that may come out.

Attention: in no case should you wash the floor with various soap solutions, because with such “care” the paint will quickly lose its color and shine, and may even peel off. For everyday cleaning, you can add three tablespoons of ammonia to a bucket of water in the water for washing the floor. This little trick will help restore the shine of the surface.

And last tip: Before wet cleaning, vacuum up the dust. When washing the floor, small particles will not scratch the surface, leaving it smooth and shiny.

Each of us, probably faced with painting the floor, and knows that this is a rather difficult task. How do you want the surface to remain bright and shiny longer! This effect is not difficult to achieve if you follow certain requirements for washing the floor.

First of all, you need to let the surface dry well. Modern floor paints dry quickly enough - within 24 hours. But it is advisable to wait another day for greater certainty.

The first wash is carried out with a very warm vinegar solution (2 tablespoons of vinegar per 8 liters of water) and a soft cloth. The procedure is carried out twice. Further, during the week, wet cleaning is carried out daily to remove various oil traces that may come out.

Attention: in no case should you wash the floor with various soap solutions, because with such “care” the paint will quickly lose its color and shine, and may even peel off. For everyday cleaning, you can add three tablespoons of ammonia to a bucket of water in the water for washing the floor. This little trick will help restore the shine of the surface.

And the last tip: before wet cleaning, vacuum up the dust. When washing the floor, small particles will not scratch the surface, leaving it smooth and shiny.

ChTPDE, CHTENS CHSHCHUSHIBOYS HLBBOP - 24 YUBUB. OP UHFLY ABOUT YUIPDE, B LTBULB CHUE EEE IPTPYP MYROEF. UMSCHYBM, UFP DMS MHYUYEZP BLFCHETDECHBOYS LTBULY, PLTBIEOOOSCHE RPMSCH UPCHEFHAF RPNSCHFSh IPMPDOK CHPDPK U HLUHUPN. EUFSH MY EEE TEEEOYS?
lTBULB OE NBUMSOOBS. OYFTPNBMSH CHTPDE.

OE OBDP NSHF OH HLUHUPN OH CHPDK oyyuen! FP LPOEYUOP OE RTYSFOP LPZDB OY RTPKFY RP RPMH Y OY RTPEIBFSH. iPFSH ABOUT UFEOH MESH.

How to wash the floor after painting?

x UBNPZP FBLPE DPNB VSHMP. OP MHYUYK CHBTYBOF - FFP RPDPTsDBFSH. about HRBLPCHLE NOPZP CHUSLPZP OBRYYHF (YOPZDB DBCE RTBCHDH). fBL ChSCH EBU RPNPEFE - NPTSEFE Y RPLTBULKH YURPTFYFSH, IHCE FPMSHLP VHDEF. mHYuYe RPDPTsDYFE.

ChSch PRTEDEMJFEUSH, YuFP TSEB LTBULB-FP…
nBUMSOPE RPLTSCHFYE DEKUFCHYFEMSHOP NPTsOP RTPNSCHFSH U CHPDPK Y HLUHUPN.
FP OE UFPMSHLP HULPTYF RTPUHYLKH, ULPMSHLP UOYNEF MYRLPUFSH.
OYFTPNBMSH UPIOEF PYUEOSH VSHCHUFTP, EUMY OE UBOFYNEFTCHSHCHK UMPC (BRBI BGEFPOB). rPUENH, UHFLY DMS OEE - UTL CHRPMOE DPUFBFPYUOSCHK.
bMLIDOSCHE RNBMY (BRBI CHBKF-URYTYFB) UPIOHF DPUFBFPYuOP VSHCHUFTP, OP RBTH UHFPL YN OHTSOP DBFSH RPUFPSFSH (ON OELPFPTSCHE HLUKHU FPTS DEKUFCHHEF).
PE CHUEI UMHYUBSI CHSHCHUPLBS FENRETBFKhTB Y IPTPYEE RTPCHEFTYCHBOYE CH RPNEEEOYY RPCHPMSAF RTPUKHYYFSHUS VSHCHUFTEE (PFLTSCHFSCHE PVPZTECHBFEMY YURPMSH'CHBFSH OEMSH'S RP RPOSFOSHCHN RTYYUYOBN).
eUFSH EEE LRPLUIDOSHCHE (FY RTYIPDYFUS FPMSHLP TsDBFSH) Y LBHYUHLPCHSCHE (TBULMBDSC LBL X NBUMSOSCHHI), RPMYHTEFBOPCHSCHE LTBULY (LFY OE CHPOSAF, LBL RTBCHYMP, Y UPIOHF VSHCHUFTP).

NSCHMSHOBS CHPDB, CHTPDE, RPNPZBEF. rPNOA, LPZDB VBVHYLB LTBUYMB RPM, UFBCHYMB CHCHETI DOPN UFELMSOOSCHE VBOLY, OB OII DPULY Y FBL DOS FTY IPDYMB RP DPULBN. bFEN NSCMB RPM NSCMShOPK ChPDPK. h NBMEOSHLPK VBOLE U ZPTSUEK CHPDPK TBUFCHPTSMB UFTHTSLH Y IPSKUFCHEOOPZP NSCHMB, BLFEN CHSHCHMYCHBMB H CHEDTP U ChPDPK.

Painting wooden floors
Varieties of materials for wood processing
Coloring technology
Puttying materials
Next steps
Kinds paintwork materials
Caring for painted floors

Modern construction market more and more offers customers various facing floor coverings, which initially have beautiful surface: laminate, parquet, self-leveling floors, etc. The article will focus on such a phenomenon as painting a wooden floor, which fades into the background in comparison with the above coatings.

Painting wooden floors

The wooden painted floor does not lose its popularity because it has a number of advantages:

All this will not be possible if the wood is not covered with special paints and varnishes.

The painting of the wooden floor is carried out in the following sequence:

1. The wooden base is being prepared.
2. Sanding and sanding is done.
3. Wood flooring is treated with special tools.
4. The surface is covered with drying oil.
5. Then several layers of the selected paint and varnish material are applied.

Varieties of materials for wood processing

When processing wood, you can use not only primers and drying oils, but also various mixtures to increase the fire resistance of the material and protect against various biological organisms that feed on boards.

In view of the foregoing, it can be concluded that there are two main types of impregnations:

• biocides– protect wood from the most different types biological impact. Painted wood is protected not only from insects, but also from the formation of mold, fungi, etc.;
• flame retardants- make the tree protected from accidental burning. The advantage of these mixtures is that they have no color, therefore, the appearance of the coating does not deteriorate during application, the protective layers are not visible in the photo and when visual inspection.

Coloring technology

Now consider the sequence of how to beautifully paint the floor in order to prevent various mistakes in the course of work. It all starts with the preparation of the foundation. It is enough to sand and putty new floors if there are defects that require it.

If the coating is outdated, then before the floor is painted in wooden house, it will be necessary to repair defective parts or completely replace the flooring (read also: "How to paint a hardboard floor with your own hands - a step-by-step guide").

To begin with, a layer of paint is removed, if any, with a spatula. Taking into account the fact that various impregnating mixtures were not used during the construction of old houses in the 20th century, it is necessary to completely clean the wooden coating. Then any gaps and cracks in the boards are sealed with putty, and unusable boards (rotten, broken, bent) are replaced.

Puttying materials

To paint the floorboard without difficulty, you should use a high-quality putty to seal up defective areas.

Various self-prepared mixtures can be used as an alternative floor putty for painting:

• large cavities can be filled with tow soaked in an adhesive aqueous solution (15% adhesive content);
• sawdust putty is known, where, as the name implies, small sawdust mixed with ordinary PVA glue or oily floor putty.

There are also two main types of purchased putties: adhesive and semi-oily (read: “What floor putty is needed and how to make it”).

Adhesive composition:

• 100 grams of turpentine are added to 4 liters of oxol;
• 1 liter of an aqueous solution with soap is added;
• about 2 liters of a 20% adhesive solution are poured.

Semi-oil composition:

• 0.5 kilograms of wood glue are mixed with 5 liters of water;
• add 1.5 kilograms of drying oil or oxol;
• add water (by eye) to thin the solution;
• based on the added volume of water (no more than 1 liter), 100-150 grams of soap are added to it.

Next steps

Now, before painting wooden floors, if they are puttied, it is necessary to sand them.

It is not difficult to understand that any unevenness of the coating will look ugly in the photo and during visual inspection. Do not think that paint will help hide defects, because. its disadvantage is precisely the opposite. It is safest to sand over the entire area of ​​the floor and then check it again for defects.

Further, the instruction on how to properly paint the floor says that after completing the steps described above, it is necessary to process wooden flooring impregnations. First, a layer of antibacterial composition is applied and only after it dries, a fire-fighting agent can be used.

How to paint the floor

Such two layers will not interfere with each other, but the application of the top layer is possible only after the bottom has dried.

Then follows the drying oil treatment procedure. The substance is necessary to increase the adhesion of paints and varnishes to the floor surface. You can replace drying oil with a cheaper primer without losing the degree of adhesion. It is only important that the applied layer is dry, and this can happen for a whole day. After that, if the color of the floor in the wooden house has already been chosen and the paint has been purchased, you can start painting (for more details: “How and with what to paint the wooden floor in the house - an overview of suitable paints and varnishes”).

Types of paintwork materials

There are many varieties, so choosing the best one is much more difficult than which roller to paint the floor with. wooden coating.

There are the following types:

• alkyd;
• oil based;
• perchlorovinyl;
• polymeric, etc.

Each paint is produced on the basis of a solvent created from organic substances. In residential areas, it is best to use water-dispersion paints, which do not have any smell, and they do not emit volatile substances harmful to the human body.

The application is carried out with a roller or brush and not in one layer. It is important that each applied layer dries before the next one is applied. Typically, the interval between applying layers reaches from a day to three or more. It all depends on the characteristics of the room, the paint used and a number of other factors. Upon the drying of the top layer, you can put the room into operation: bring in furniture, household appliances etc.

Caring for painted floors

Owners of their own homes should know not only how to properly paint the floors with paint, but also the rules for caring for the created coating. In fact, everything is very simple: cleaning can be dry with a broom or a vacuum cleaner, or it can be wet with a rag or brush.

Restoring the cover is also very easy. As needed, you can work with grinder. But, in practice, repairing floors is not profitable, since the paint layer is applied easier and faster.

Outcome

From the foregoing, we can conclude that a painted floor is created much easier and faster than more modern flooring, and its maintenance does not know how to exquisite conditions which makes life easier for the owners. Any lack of wood coating can be eliminated with the help of special substances and we are not talking about simple mechanical defects, but about increasing fire resistance and daring various organisms that love to feast on natural wood.

If you have to paint walls or floors, then information about correct painting and quick drying paint will come in handy. Better than oil paint, coatings have come up with nothing. Therefore, if you want it, you don’t want it, but you need to take into account how long it dries. The cost of oil paint is available to everyone, the surface after painting is smooth and shiny. In order to maximize the drying time of its drying, use the following recommendations.

You will need paint and a heater, a roller (a brush will do) and a fan, as well as desiccants - special substances that speed up the drying of oil paint.

Several ways to speed up paint drying

First of all, you need to paint for quick drying thin layer. Apply with a roller or brush, depending on what you prefer, the paint on the surface prepared in advance. The layer should not be very thick. Thus, a layer of oil film is formed on the painted surface, which dries in less than a day. Painting can be repeated if the coating is uneven. Stir the paint constantly to avoid streaks.

Another in a good way The drying of the paint is accelerated by the fan, since the paint dries due to the interaction of oil particles and oxygen. The process of oxidation, not the evaporation of water, is the key - there is no water in oil paint. In order to speed up the reaction of paint and oxygen, it is enough to turn on the fan. Direct it as far as possible at the painted surface and open the window for a few hours.

In addition to the fan, you can use a heater: place it in the room where the surface was painted. Warm air also accelerates oxidative processes between oil paint and oxygen.

Painting the floor with paint

Thus, the paint layer becomes much stronger and also more resistant to impact on it. different kind alkalis. But remember that the heater must not be left unattended.

The composition of the paint also plays important role during its drying time. Not only temperature regime and external factors may influence this process. When you buy paint, be sure to pay attention to its composition and the recommended paint drying time. Different paint materials have different drying times. Many experts recommend paying attention to the composition of the paint for good reason. It is the list of components that can say a lot, there should be no more than 10 units in the paint.

Good for smoking out odor and drying surface and chemicals, for example, desiccants. These are special paint drying accelerators. Read the instructions for how much to add to the paint, then mix well and use the material for painting. Pay special attention to desiccants, since they not only speed up the drying process of the paint, but also do not significantly affect the quality of the painting.

All these methods can be used together: add desiccants to the paint, apply it in a thin layer and then blow it with warm (but not too hot) air. In this case, the paint will dry very quickly ... but whether such a result is worth the effort and money expended is up to you.

Some owners decide to paint the floors in the room. The procedure is simple, but you need to follow a few basic rules to achieve the perfect result.

Floor painting consists of three stages.

How to wash the floor after painting and how to further care for it

The first of which is the preparation of the floor for this procedure. Clean the floor and wash thoroughly. Then the surface should dry. This usually takes several days.

Now you can proceed directly to painting the floor. For these purposes, use oil paint. If its color seems a little dark to you, dilute it with drying oil.

When the floor is completely dry, start painting it. Apply the first coat of paint in a thin layer to the entire surface of the floor. After applying the first coat of paint, leave the floor again for several days to dry. Then you can apply a second coat of paint.

After the painted floors have dried completely, they need to be washed.

Important! For the first few days, wash freshly painted floors daily to remove oil marks.

Ideal for cleaning floors fit warm water to which a little vinegar is added. Never wash floors soapy water. In this case, the paint will lose its luster, and the stains will be quite difficult to wash off.

Vinegar cleaning - tried and tested effective method make your home clean without using toxic chemicals.

Cleaning with vinegar is effective tool for crystal clear home

Tired of harmful detergents? Vinegar - excellent natural cleanser many surfaces in the house. Surprisingly, cleaning with vinegar helps get rid of grease and bad smell. After cleaning with vinegar, you just need to wipe the treated surface and the smell of vinegar will disappear, leaving behind a fresh scent.

The most common problems that you can get rid of with vinegar

Removes soap buildup and unpleasant odors from dishwasher by pouring a glass of white distilled (table) vinegar inside an empty machine and running it on a rinse cycle.

How to wash a wooden floor after painting with enamel?

You can repeat this procedure monthly.

To get rid of limescale in a teapot, half a glass of distilled white vinegar and water is poured into it and left overnight. If the plaque still remains, then boil another half cup of white distilled vinegar in a kettle for a few minutes, allow to cool and rinse with plain water.

To remove labels or price tags, a cloth soaked in distilled white vinegar is attached to them. The fabric is left overnight, and by morning the label can be easily removed!

You can get rid of mold and soap deposits in the bathroom or shower by wiping the surface with undiluted white distilled vinegar. The surface is then rinsed with water.

To deodorize a toilet, pour three cups of white distilled vinegar into the toilet bowl and leave it for half an hour, then rinse.

Use hot undiluted white distilled vinegar to remove paint from windows, doors or glass. Give some time to soften the paint, and then remove with a razor blade.

You can wash and disinfect toys of a child or pet in soapy water with the addition of a small amount white distilled vinegar.

You can clean sticky scissors with a cloth soaked in white distilled vinegar.

You can clean the grill by spraying white distilled vinegar onto crumpled aluminum foil and then vigorously rubbing the grill with the foil.

To clean and deodorize the countertop, wipe it with a cloth soaked in undiluted white distilled vinegar.

Vinegar cleaning: windows and mirrors

Many cleaning product manufacturers are starting to offer eco-friendly options for their glass cleaners, but perhaps one of the greenest is cleaning with vinegar. Use a simple solution - 2 tablespoons of vinegar per liter of water and newspapers, which are used to clean glasses instead of paper towels. If vinegar doesn't work for you (if you have a lot of windows to clean and you're worried that the smell might be too strong), lemon juice or baking soda are a good alternative.

Vinegar cleaning: smells

Vinegar is great for removing unpleasant odors from your clothes, as well as sweat stains. Placing a bowl of vinegar on your counter will quickly rid the room of bad smells.

Vinegar Cleaning: Dry Cleaning

Cleaning clothes with vinegar is an easy and inexpensive way to deodorize clothes. Many people already know that white vinegar in a small bowl is great for removing smoke odors and musty odors, and that you can just put a bowl of vinegar on the floor of your closet or on a shelf if your coat or jacket is saturated with these smells. But what most people don't know is that if you add white vinegar to the water at the beginning of the wash, it will refresh and soften the clothes during the washing process. The smell of vinegar will miraculously disappear before the end of the wash, and all the laundry will have a very fresh scent. You don't need a lot of vinegar - half a glass is enough, a full glass is too much, exact value is not necessary. Don't forget to also add your usual detergent!

Get Your Plumbing Shiny Clean With Vinegar

Vinegar Cleaning: Plumbing

Toilet cleaners that remove rust stains on the market today can be very toxic. Instead of these products, you can use vinegar by applying it to the surface of the toilet and leaving it for about 15 minutes. After that, you need to wash it as usual. The same mixture you use to clean your windows is also great for brightening up all the china and fixtures in your bathroom. Plus, it's great for killing bacteria.

Vinegar cleaning: floors

Cleaning your floor with a solution of one cup of vinegar to a liter of water will make the surface shinier.

Vinegar Cleaning: Wood Panels

You can clear your wooden panels 1/4 cup mixture olive oil, 1/2 cup vinegar and 2 cups warm water. The result will be simply amazing.

Provide brilliant results professional tools"For a wooden floor" and proven folk methods

Wooden floors are more susceptible to pollution than flooring with modern protective and decorative coatings. However, there are several ways to properly wash the floors, depending on the type of board and its processing. I will tell about this.

What should be taken into account?

Any problem is solved taking into account the type of board, its coating and the type of pollution.

The parquet floor cannot be wetted with water, otherwise it will quickly become unusable.

Abundant moisture is unacceptable, even if the boards are varnished, since the parquet floor is laid from equally small boards. They are tightly fitted one to the other. This cladding is concrete or wooden base has many joints in which water lingers and destroys the wood over time.

Means "For parquet" will provide high-quality washing and will not damage expensive wood flooring.

Means are also selected special- just for parquet. They form a shiny protective film, polish the boards and close the cracks.

Lacquered plank floors also require a special approach to cleaning.

A boardwalk is made from large boards. Their sizes are different. And in order to clean the plank floor cleanly, their own nuances are taken into account. Namely, whether it is painted or not. Therefore, the care of a wooden coating also depends on its processing:

All joints will be cleaned with a regular vacuum cleaner with a floor nozzle

• Vacuum the floor first i.e. dry wash. This applies to all wood floors. After all, it is very difficult to wash the dust in cracks and joints, even using the most effective cleaning agent;
• Then the wet cleaning begins. wood floors.

How to clean a wooden floor

You can ideally wash the boardwalk only with your hands and a soft cloth, but not with a mop!

Wood cannot be cleaned with dry products, with abrasives, undissolved soda. Hard brushes and rags will also scratch it.

A fluffy cotton cloth will wash off all dirt without damaging the varnish.

Choosing which rag is better to wash the floor, we prefer cotton. It is well wrung out, soft, as close as possible to the surface. The result is a perfectly clean floor.

For daily cleaning, you only need to slightly moisten the nozzle on the mop.

Routine cleaning- clean water and a damp (should not drip) mop.

General- using a diluted floor cleaner. The flooring is abundantly wetted with it, the cracks are washed out, and then the wet surface is wiped dry.

Method 1. How to wash an unpainted floor

Unpainted flooring is the most difficult to maintain - the tree absorbs dust and moisture.

Before washing, unpainted floors must be freed from debris with a vacuum cleaner. Particular attention is paid to the joints of the boards. After all, it is in these irregularities that dirt is deposited and is especially noticeable. And it is not easy to wash it out of there even with a brush.

Unpainted wood deteriorates from moisture: it swells, bends.

Then stains are considered, because various contaminants are removed in different ways.

Professional compositions will cope with many stains

Proven old ways:

• powder baking soda black marks from shoes are eliminated (it can be applied on an unpainted surface). It is necessary to sprinkle soda on a dark mark, and then wipe this area with a damp sponge. And grains of soda will be drawn in by a vacuum cleaner.
• Alcohol or vodka you can remove any stain from the tree. Then clean the trace with a sponge and soda.
• A solution of ammonia you need to wash the sticky spots first, it will easily eliminate them. Then remove the remaining sticky substance with a spatula.

After removing all the stains, you can start a general wash.

Here is the best way to wash the floors if they are unpainted:

• take lime and sand(it is necessary to mix 50g and 150g, respectively);
• add 4 liters of water to the mixture
• then with a soft brush wash unpainted boards.

This solution is great for cleaning unpainted boardwalk as well as disinfecting it. After drying, vacuum the floor.

Baking soda and vinegar are old-fashioned cleaners and disinfectants for hardwood floors.

soda solution– more available remedy. Dilute half a pack of baking soda with 4 liters of water. Then scrub the boards with a brush.

Vinegar and ammonia(2 tablespoons in 5 liters of water) - with this composition you can wash the floor in the store and at home. It will ideally relieve unpainted wooden surface from dirt.

Consider how to clean floors after repair:

• sweep with a broom various garbage;
• Go through the vacuum cleaner to completely clean the boardwalk from construction dust. Now ingrained dirt is already visible on it, as well as stains from paint, glue, plaster;

A special tool and a hard sponge will facilitate the work.

• We use the means of the line “Everything for repair”. Using these universal developments, you can quickly eliminate all repair rubbish.

people's councils, how to wash floors after repair, they offer proven compositions from improvised ingredients:

• sandpaper gently wipe off traces of glue without peeling off the paint;
• brushed clean off drops of plaster, lime;
• a glass of kerosene or gasoline in a bucket of water will refresh the wood after repair;
• diluted vinegar immediately eliminate the pungent kerosene smell.

After washing, the surface is waxed - this is its protective layer.

The cleaned flooring is treated with a moisture-protecting agent with the addition of wax or silicone (the price of such a composition is acceptable).

Method 2. How to wash painted wooden floors

Brightly colored flooring can fade from improper washing.

Painted floors are easier to clean. After all, dirt does not eat into the wood due to the monolithic layer of paint:

• Vinegar or ammonia diluted in water(1 spoon per 1 liter) and moisten a mop sponge or rag with the resulting solution;
• The mop should slide without coming off the surface. And it is right to wash the floor - moving the mop in a sailor's way: "eight";
• For shine you can make a solution of 2 tablespoons of vinegar, 1 spoon of preparation for cabinet furniture shine and 2 liters of water.

It is not recommended to rub the surface with wax or oil-containing substances, since the painted wood does not absorb them, and sticky dirt soon forms instead of gloss.

Household chemicals - the solution to the question of how to quickly wash the floors at home.

Stains from painted boards are removed locally with alcohol. Then the means "For the floor" are applied - they thoroughly wash the entire surface.

Such moistening is permissible only during “general” cleaning, and not daily

A trail of urine can be washed too. You will need:

• Dry wipe. The urine of an infant or pet is eaten into the wood structure. Therefore, it is immediately collected with a dry cloth.
• Dish detergent. Then gently wash the stain with dishwashing detergent.
• Ammonia. Then it is rubbed with ammonia diluted in a glass of warm water. It will restore the surface shine and uniformity.
• Vinegar. But washing the floor with vinegar and water (1:10) will eliminate the unpleasant smell and refresh the color of the painted boards.

The use of chlorine-containing products on a painted surface is undesirable: the smell will disappear, but the surface will brighten forever.

The final step is to wipe the floor dry

How to wash parquet

How to clean wooden floors? Clean parquet regularly water is better with vinegar.

Expensive exquisite parquet should be washed from dirt carefully and better with your own hands. After all, it is important to protect it from damage. Often parquet flooring do not varnish, but simply diligently and regularly rubbed.

Lacquered parquet flooring do not clean with dry powders, so as not to scratch the varnish. And regularly need to be refreshed with polish.

For frequent washing you can purchase a special steam mop (pictured) so that the coating does not get wet

Moisture will penetrate even when water-repellent coating: into microscopic cracks, cracks, holes. Then the tree is deformed, the floor will begin to creak, and the parquet boards will fall out.

Method 3. Professional parquet care

Only gel formulas - no powders!

Now there are many means for such a floor from planks. And the instructions for their use guarantee the desired result. Of course, with them, labor-intensive wet cleaning is noticeably simplified.

When fighting stains, it is better to beat the product until foam forms - it will wash the surface without penetrating deep into.

You should wash the floor with a slightly damp cloth - the foam cleans well and without excess moisture.

The selected solution must be marked "for parquet".

New formulas eliminate greasy stains and stubborn old dirt.

Such compositions cope, besides efficient removal dirt, with a few more tasks:

• Forms a protective wax or silicone film;
• Gives a glossy polymer sheen;
• Leave no streaks;
• Make wood resistant to moisture;
• Does not require rinsing;
• Effective even in cold water;
• Non-toxic and safe.

The usual use is to dilute the composition in water and wash the floor.

And it will protect and update the wooden floor from scratches.

Conclusion

Now, having learned the recommendations and tips, you can easily clean the floor with a brilliant result, and admire the well-groomed wood flooring for a long time. And now I propose to familiarize yourself with the video in this article - in it good example than to wash such flooring. We can discuss your questions and ideas in the comments - write!

What do you need to polish the floors to make them shine and shine? Pure Smooth surface floors always arouse the admiration of guests and the envy of housewives, and if the floor also sparkles with cleanliness, you will invariably be bombarded with questions about what you are doing with it. What can and should be rubbed on the floor to achieve its radiance? In this article, we will look at the most popular floor coverings and how to clean them and give them shine and shine.

If the floor in your house is covered with laminate, you don't have to worry about its sheen. If you believe the manufacturers, the laminate sparkles without any processing and can last at least 10 years without loss of quality. Washing such a floor is a pleasure, cleaning the laminate is not a hassle, and any cleaning products can be used as cleaning products, although there are special means for laminate floors.

Floors covered with linoleum require very careful and careful handling. Any scratch, dent or other damage to the surface becomes more noticeable over time. Linoleum floors should be washed with warm soapy water using a neutral soap solution. Once a quarter, a floor covered with linoleum can be smeared with drying oil, and then polished with a flannel cloth. After such treatment, the floor will shine and will delight you for a long time, freeing you from the need to purchase expensive funds.

The parquet floor always looks warm, cozy and rich. True, behind this beauty is the efforts of the owners to carefully care for its surface. With vermin, the parquet wood can dry out, and this threatens with the appearance of cracks, the parquet can begin to creak. In no case should you wash the parquet floor with water, the parquet becomes damp from moisture and can be deformed, which contributes to the formation of waves and cracks. The damaged area will have to be replaced with a new parquet. If the parquet was stained with something, it can be carefully cleaned, for this it is necessary to understand the cause of the contamination.

For example, to remove greasy stains from parquet from parquet, you need to prepare a mixture of washing powder and a small amount of warm water. Rub the area with contamination with this mixture and leave for a while until the mixture dries, and then remove the mixture along with the contamination with a damp cloth. If the stain is old and ingrained, the procedure can be repeated.

Painted wooden floors that have lost their luster over time due to the influence of detergents containing substances that adversely affect the paint can be refurbished. To add shine wooden floors, painted with paint, you need to wash them with acidified water. To do this, add a couple of tablespoons of vinegar to one bucket of water. Vinegar can also be replaced with ammonia - the effect will be the same.

Back to helpful articles

Since we are all forced to keep our habitats clean, wash windows in a timely manner, wash curtains and clean up, one of important moments is the maintenance of the floor we walk on. The floors are known to be different materials, in accordance with their functional purpose: linoleum, wood, stone and marble and also the floors are covered carpeted. Consequently, floor maintenance guidelines differ significantly from each other.

Linoleum care. Shine without streaks

• Linoleum quite common in everyday life and affordable. First you need to sweep the floor to clean it of dust and debris. Linoleum is unpretentious in care, it can be washed with ordinary warm water with the addition of a soap solution, but it should be wiped dry. Oddly enough, linoleum is well washed with water from under boiled potatoes.
• For maintaining the elasticity of linoleum there is a recipe for an oil mixture from a folk piggy bank. Mix proportionally 1:1 vinegar and raw linseed oil, rub into the surface of clean, dry linoleum. If there are scratches on the linoleum, before carrying out this procedure, clean them with fine sandpaper, sweep off the dust and then rub the oil-vinegar mixture.
• To make linoleum less dirty, treat it with homemade floor mastic. Prepare a soapy solution (2 tablespoons of grated soap per bucket of water), wash the linoleum, using a stiff brush to remove dirt. Mix 2 liters of warm water and 2 tablespoons of liquid floor mastic and wipe it. The resulting protective film will not let the floor get dirty quickly , linoleum will be without divorce however, this procedure should be repeated at least twice a month. This method is well suited for maintaining cleanliness of linoleum in the kitchen, where greasy stains from cooking tend to accumulate.
• To make linoleum shine, use natural polish from an equal mixture of water and milk. First remove stubborn dirt and stains with a steel wool soaked in turpentine, then apply the mixture to the floor and polish with a soft flannel cloth.

Delicate wood floor care

• How to clean wooden floors? How to clean laminate? First of all, these coatings are practical and require minimal maintenance. It is enough to sweep them and wipe with a damp cloth. Wood floors can swell and lose their shape when exposed to excess moisture, so be careful not to allow water to accumulate on them.
• Parquet floors need special care, but there is nothing complicated in it, folk remedies will help to properly care for parquet at home without significant investment.
• Heavily soiled parquet scrub along the fibers with a cloth dampened with turpentine or lighter gasoline, then rub it home polish according to the recipe below. The same method is used to remove fresh greasy spots. If small gaps have formed in the floorboards, pour ordinary talc into them before rubbing.
• It is not recommended to wash the varnished floor. Sweep the floor and rub home polish with a dry cloth or paper towel.

home polish recipe

• For cooking home polish to a bucket of water (5 liters), add 6 tablespoons of vinegar and 4 tablespoons of furniture polish. Mix the mixture well, its remains can be stored in a tightly closed bottle or jar.

Many, striving for comfort in their own family nest, choose for the floor carpet covering. The soft floor is a favorite place for children to play, therefore, you need to especially carefully monitor its cleanliness and use for cleaning natural safe means without any chemicals.

How to clean carpet easily

• Any carpet need to be vacuumed regularly. Even in the absence of obvious contamination, dust gets into the carpet every day, so this must be done at least once a week (in the children's room it is advisable to vacuum every other day).
• Stains on carpet it is advisable to wash off immediately, before they are absorbed, with a wet sponge. If this still happened, it will help you folk recipe stain removal. In 1 liter hot water rub the floor of an ordinary bar laundry soap, mix and pour in 3-4 tablespoons of vinegar. Apply the composition to the stains, brush thoroughly (bristle stiffness depending on the thickness of the coating).
• To freshen up the color carpet resort to home unpretentious methods, resorting to proven natural remedies. You will need small sawdust, 1 tablespoon of ammonia solution and a liter of water. Mix all the ingredients, sawdust should absorb water. Place the mixture on the carpet problem areas(spots) additionally scrub with a brush, let dry and vacuum.
• For carpet cleaning use a gentle homemade shampoo. Usage natural ingredients for carpet cleaning is relevant for families with small children. It is for people who value environmental safety that there is a time-tested and previous generation simple carpet shampoo recipe.

Carpet shampoo. homemade recipe

• Depending on the square of the carpet, make a mixture of potato starch and grated ordinary laundry soap. For 1 cup of starch - 1 tablespoon of soap flakes. Stir the mixture, sprinkle it on the carpet and scrub with a stiff brush. Leave the mixture for an hour, until completely dry, and vacuum.

Maintenance of marble, stone and granite floors

• Marble, stone or granite floor To clean, just soak with soapy water. aqueous solution, at heavy pollution– leave it for a few minutes, then rinse and wipe with a dry or well-wrung cloth. If the marble floor has particularly stained areas, wipe them cleansing paste according to this recipe: for 1 sq. a meter of marble floor take 3 tablespoons of non-abrasive cleaning powder and drip lemon juice. Thoroughly rub the mixture into the contaminated area, wait a minute, rinse with water, wipe dry.
• old stains on marble removed with ordinary garden lime, of course, you need to protect the skin of your hands with protective rubber gloves.

Regular maintenance will keep your floor looking its best and clean. natural folk remedies the family budget will not suffer. By the way, many men welcome the vector direction of their women to the natural sources of cleanliness in housekeeping.

Good hostess and reasonable modern woman always strives to save family money in order to use it as rationally as possible. It is desirable to improve your appearance and pleasure! It's much easier use proven methods of using folk remedies for the household, and, instead of buying a bunch of expensive cleaners and detergents for floor care, with safely saved funds, indulge in romance with your loved one and visit the Spa!

1. Not all wallpapers can be washed. If you are not sure what type your wallpaper is, do a test: try washing a very small area (preferably in a secluded place - say, behind furniture), let it dry thoroughly, and then inspect for any damage - if the color changes, pattern, whether smudges remain.

2. With a lint-free cloth or soft sponge dipped in warm water with the addition of liquid detergent, wipe the walls from top to bottom with quick light movements. Avoid using colored soaps or sponges - they can accidentally stain the wallpaper. It is also important not to overdo it with detergent - the solution should not have thick foam. In general, it is precisely such a mixture of simple components - water plus detergent - that is the most versatile for washing walls with almost any coating (more on exceptions below).

3. Clean water and drying. Walk along the walls with the same rag or sponge, but already dipped in clean water. The main thing at this point is to regularly change the water so as not to carry dirt along the walls. It may be more convenient to pour two buckets at once - with soapy water and clean water. Then, to remove excess moisture, wipe the wallpaper with a cotton towel.

4. Delete different types spots with wallpaper you can different ways. For example, to combat oily stains, apply talcum powder to them, leave for a few minutes, and then clean with a brush. Fingerprints can be removed with an ordinary eraser, and traces of alcohol markers can be removed with vinegar or citric acid.