DIY sliding screen for a bathtub made of plastic panels. For acrylic bathtub

A bath screen is a structure that is made from various materials and is used to hide communications. From a constructive point of view, there are several options for such protective panels, which allows you to choose the most suitable product for a specific interior. Screens allow you not only to protect pipes from moisture, but also to decorate a room, making it more functional and original.

Today, bath screens are classified into two main groups:

Solid;

sliding

Solid models are the most common and are characterized by simplicity. However, the simplicity of the design does not affect its effectiveness. The cladding of such a product, as a rule, is made with the same materials as the rest of the room (for example, tiles). Thanks to this, the panel fits organically into the interior of the bathroom.

Sliding models, in turn, are more functional. The design of such screens allows you to organize shelves under the bathroom for storing household chemicals and other household items. You can buy a screen for a sliding bathtub in any construction hypermarket or specialized store. It is also easy to choose and order the product you like via the Internet.

Advantages and disadvantages of solid models

Arranging a solid screen in the bathroom allows you to achieve harmony in the interior of the room. The cladding for such a screen can be very different, but most often they use decorative tiles or mosaic. Products lined with mosaics look the most aesthetically pleasing. Let's look at the advantages of solid models in more detail:

• this design has a long service life;
• Solid tile bath screens are easy to clean. To clean the dirt, just use a damp cloth or sponge.

However, such panels also have some disadvantages that are worth paying attention to:

• in some cases, the small dimensions of the viewing window are not enough to carry out repair work under the bath;
• inability to store household chemicals under the bathroom;
• If such a panel is available, replacing the bowl is accompanied by some difficulties, since the structure will have to be dismantled.

Note! To access the communications located under the bathtub bowl, it is necessary to install an inspection hatch of sufficient size. If there is such a hatch, there are no problems with repairing pipes, since dismantling the shielding is eliminated.

Thus, a solid screen is an excellent solution for the bathroom interior, but its use is associated with some inconveniences.

Bath screen sizes

Protective panels differ not only in their design, but also in size. There are both standard and non-standard screen models. Today, the minimum length of these products is 105 cm, and the maximum can reach 190 cm.

Let's look at the dimensions of the most common screens:

• length – 150, 170 cm;
• width – from 50 to 56 cm;
• thickness – 3 mm.

Less common model sizes are 160, 180 and 190 cm. Screening non-standard bathtubs is much more difficult, since it is not always possible to find a suitable product on sale. Bath screens 150 cm are the most common and are easy to install.

Solid panels are equipped with legs, which are necessary for adjusting or adjusting the product. Bath screens 170 cm are also standard and are used much more often than models whose length is 180 or 190 cm.

Screen design differences

The construction market offers many varieties of such panels to suit every taste. They differ in design and functionality. Many companies are engaged in the production of custom-made bath screens, which allows us to say with confidence that there is a large selection of these products.

Let's consider the types of such protective panels, depending on the design features:

• standard;
• multifunctional;
• end

Standard models are the most common and consist of a plastic panel for which a frame of appropriate dimensions is selected. The multifunctional version differs from the standard one in that it has the ability to adjust the size of the screen under the bath (due to the legs). End panels are used to hide only a certain part of the bathroom.

Helpful advice! Today you can find products equipped with various auxiliary elements, which are necessary for convenience. Such products include panels with shelves, handles for people with limited mobility, as well as screens that include a hole for the legs.

Photos of screens for bathtubs can be easily found on the Internet, which greatly simplifies their selection.

Related article:

Types, advantages and disadvantages of sliding screens. Selection rules. Do-it-yourself assembly and installation of a sliding screen.

Features of plastic models

Plastic shielding options are the most popular today. They are distinguished by their attractive cost, as well as ease of installation and operation. The service life of such panels can reach 10 years (provided proper care after them). Plastic screens are resistant to moisture and do not rot over time.

The main advantage of panels made of this material is variety color solutions. This is due to the ease of production of products from polymers. The functionality of such screens may also differ. In specialized stores you can buy plastic screens for bathtubs with shelves, sliding, solid, removable, folding, etc.

If desired, you can perform shielding yourself. To do this, you will need inexpensive polymer lining. Such a panel does not require additional facing work, which has a positive effect on financial costs. To fix the plastic lining, it is necessary to mount a profile made of wood or metal.

The main disadvantage of plastic screens of any type is their poor resistance to mechanical stress (shocks). At self-installation plastic solid screen, you need to take care of organizing the door under the bath for quick access to hidden communications. You can make a special door yourself or purchase it in a store.

Acrylic bath screens

A popular type of protective panels, which is often sold complete with the acrylic bathtubs themselves. Such products are made from plastic material, which is subsequently treated with an acrylic layer. All of them are individually designed. Therefore, experts do not recommend buying acrylic models separately from bathtubs, as finding suitable option almost impossible.

Acrylic panels are only suitable for installation under bathtubs made of the same material. In most cases, such panels are solid, however, other varieties can be found on sale. If it is not possible to purchase a suitable screen for a specific bathtub purchased previously, it is recommended to buy a custom-made screen for the bathtub.

Note! Acrylic models have the same colors as the bathtub, which allows general design look organic.

One of the advantages can also be noted that such panels fit tightly to the sides of the bowl. The frame and fixing elements for fastening the panel are supplied to customers complete with the screen itself.

Screens made of MDF sheets and mirrors

MDF screens for bathtubs are most often used in classic room design, as they have a wood pattern. A wide range of colors and textures allows you to choose a product that will suit any interior. MDF shielding looks stylish and expensive, which often attracts buyers. However, when purchasing such a screen, you need to pay attention to two important points:

• products made from this material are only suitable for standard, rectangular bathtubs;
• MDF screens are made by compressing sawdust, so they are not resistant to moisture. In order to solve this problem, it is necessary to choose a moisture-resistant material that is equipped with a protective film.

Demand mirror models It's quite simple to explain. Most modern bathrooms are small in size, and a mirror surface can visually increase the space of a room. Such panels also add play of light. They can be mounted under different angles, as well as equip special lighting (for example, neon).

In any case, the mirror screen looks very impressive. However, such panels are not without their drawbacks, including fragility and difficult maintenance. Drops of water and stains on a mirror surface are much more noticeable than on any other surface, so you will have to wipe them quite often.

You can make a screen from MDF with your own hands, which will be exactly the same as

Drywall bath screen

Panels that are made from plasterboard material, are accessible and inexpensive. Organizing plasterboard shielding is quite simple with your own hands. In most cases, after installing a plasterboard screen, it is covered with ceramic tiles.

Important! To screen the space under the bathtub, it is necessary to use a moisture-resistant type of plasterboard sheet.

Let's look at the process of installing screens for plasterboard bathtubs:

1. First of all, you need to assemble the frame. The material for assembling the frame is timber with dimensions of 40x40 mm. At this stage, fixing elements and metal corners are installed.
2. Next, markings are applied to the walls and floor, which are needed for orientation during the installation process.
3. After applying the markings, the slats are installed along them. The slats are installed in both vertical and horizontal planes.
4. Next, the front panel is cut out of the plasterboard sheet, onto which hinged hinges or latches are installed.
5. The product is installed and an inspection hole is made in it.

Ceramic screens for bathrooms

Ceramic shielding allows you to organically decorate your plumbing unit. The main advantage of organizing a ceramic protective panel is that it looks as presentable as possible. Ceramic tiles are the main finishing material when organizing plasterboard screens, as well as tongue-and-groove slabs. Ceramic tiles are resistant to moisture, easy to clean, and also resistant to mechanical stress.

Installing a screen under a tile bathtub is quite simple. To carry out installation, you do not need to have special construction knowledge and skills.

• first you need to take measurements (width and height of the opening under the bathroom);
• Ceramic tiles are laid from the left top corner. Very important point is that installation must be done strictly horizontally;
• each individual tile element must be lubricated with tile adhesive;
• The alignment of a ceramic screen consisting of tiles is carried out using special crosses. Such crosses are inserted into the gaps between the tiles and form the same distance for all structural elements;
• Not only solid screens can be covered with tiles.

Bath curtain made of curtain fabric

There is no doubt that such a curtain is a non-standard solution. But it has several obvious advantages over rigid materials. The main advantage of a bath screen is ease of manufacture and installation. To organize such a curtain you will need curtain fabric (300x60 cm), thread, needle, as well as scissors and a hot gun.

People who have a hard bath panel installed constantly touch it with their feet. Bathtubs with such panels are inconvenient to clean. Using a curtain solves this problem.

Note! This non-standard solution is only suitable for rooms with good ventilation, since the curtain is not able to protect the pipes from moist air.

Before purchasing a bathtub protection panel, you need to pay attention to the following points:

• Before purchasing a panel, it is recommended to take measurements of the bathroom and bowl;
• the choice of product design depends on two factors: the financial capabilities of the buyer and the dimensions of the bathroom. For example, it is not recommended to purchase folding screen models for bathrooms, the dimensions of which are standard. For small spaces, solid models are best;
• a model with doors allows you not only to protect communications, but also to organize a small storage area under the bathroom for household chemicals and other items;

• It is recommended to pay attention to the material from which the panel fittings are made. It is very important that the material has good resistance to corrosion;
• the panel must be freely adjustable, so you need to check the legs before purchasing the product;
• Aluminum is considered the optimal material for the panel frame;
• MDF bathroom screens are suitable for rooms equipped with good ventilation system. Otherwise, due to stagnation of moisture, this material can quickly become unusable.

The design of the panel is selected depending on the individual preferences of the apartment owners. Assembling a bath screen with your own hands will save you a lot of money.

Riho baths

How to make a bathtub screen with your own hands from plasterboard and tiles

Before the beginning self-assembly For a solid panel, you need to prepare the following tools and materials:

• drywall;
• building level;
• facing tiles;
• grout for facing tile joints;
• grinder, drill, screwdriver;
• special sealing compound.

Assembling a plasterboard panel is a common activity. This is due to the availability of the material, financial benefits and ease of execution of the shield. The moisture-resistant plasterboard used for these purposes has good flexibility, which makes it possible to create a panel of non-standard shape.

How to make screens under the bathroom with your own hands? Let's consider the sequence of actions:

1. First the marking is done. Markings must be applied to the walls and floor, which will eliminate installation errors in the future.

1. At the second stage it is necessary to form frame structure for the panel. The frame can be made of wooden slats or metal profiles. To assemble the frame, you need a drill and a screwdriver.
2. After the frame is ready, it is necessary to cover it with plasterboard sheets. For this, special self-tapping screws for drywall are used.
3. Next, you need to fill all the seams and joints in the resulting structure with a hermetic compound.
4. At this stage, the façade part of the plasterboard panel is treated with a primer.
5. At the end, the plasterboard panel is faced with ceramic tiles.

Helpful advice! Experts recommend treating frame elements protective compounds. This is necessary to improve the moisture-resistant qualities of the structure.

Thus, assembling a panel for a plasterboard bathtub with your own hands is not difficult. And the finished screen will significantly improve appearance bathroom. If necessary, you can buy bath screens in a specialized store or on the Internet.

Installation of a plastic or acrylic screen on a bathtub

As a rule, the panel comes with instructions, which must be studied before installing the screen under the bathtub. For designs that differ only in size, the assembly process will not be much different. The main differences in this case come down to the fact that the legs for panels for a high bathtub have an additional headroom (about 5 cm).

Let's take a step-by-step look at how to install a screen under a bathtub:

1. Before installing this structure, it is recommended to fill the bath with water.
2. It is necessary to install special handles on the outer panel of the screen, which are mounted for ease of use of the structure.
3. The legs of the product come separately. They must be inserted into the holes located on the bottom side of the screen.
4. Next, you need to place the panel under the side of the bathtub.
5. After this, the structure must be fixed using auxiliary components.

In some cases, the bathroom is distinguished by the fact that it has protruding communications or baseboards, the presence of which prevents the shield from completely covering the free space under the bathroom. How to install a screen under the bathtub in such a situation? It is best to measure the parameters of the protruding elements and make a corresponding hole in the screen. Then the screen will not bump into a protruding element of the plumbing unit. Of course, you can remodel a bathroom, but this more labor-intensive and expensive undertaking is not suitable for everyone.

How to install a screen on an acrylic bathtub?

To install the screen on an acrylic bathtub, you must adhere to the following algorithm works:

1. First of all, you need to make markings on the side and screen. The markings must correspond to the fixation points.
2. At the next stage, you need to place the shield against the bathtub at a certain angle of 30–40° and place its top between the side and the mount.
3. Next, the previously marked places on the side and the shield are drilled for screws.
4. At the end, the holes that must match are fixed with self-tapping screws.

Screens for acrylic bathtubs have good resistance to moisture and also have a long shelf life. Experts recommend that you carefully study the instructions before installing such a protective panel. The instructions describe all the necessary installation details.

Video of installing a screen on an acrylic bathtub

The screen is not a necessary part of the bathtub, but it can be used to block communications and other unsightly “views” under the bathtub. In our article we will look at how you can make this design yourself, because in some non-standard situations It is simply impossible to purchase a screen that is suitable in shape and size.

Why should you cover the bathtub with a screen?

WITH modern baths The kit usually comes with screens that are suitable for all parameters - installation of such a design will not take even an hour. But if we are talking about steel or cast iron products, then there are no screens for them, so there are only three options left: buy it, leave the space open, or make a screen for the bath with your own hands.

Whether or not to use such a screen for a bathtub is a decision that must be made by the apartment owner himself, but, most likely, everyone will want to have a beautiful and neat bathroom, because it is the cladding that allows you to give the room a complete and attractive appearance, covering unsightly communications. But aesthetics is not the only reason for installing such a product. So, you can make a screen, additionally equipping it with small containers for storing various containers, jars with household products, which means you can save a significant amount of space in the room.

In addition, when using a bathtub without a screen, water may get under it, dirt begins to accumulate - all this will soon lead to dangerous fungus. In addition, the floor in the room wears out faster, losing its attractiveness. It is the installation of the screen that will avoid such problems.

What are the design requirements?

There are various options for arranging such a design, however, when choosing a material, shape, etc., you should take into account the basic requirements for the screen. First of all, remember that this product is installed for the bathroom, which means it will be used in humid conditions; the material of manufacture must be moisture-resistant and able to withstand sudden temperature fluctuations.

If this is not taken into account, then literally in a couple of months fungus will begin to appear on the material, it will begin to collapse under the influence external factors. It is also important to remember about tightness; water should not get into the space under the bathtub itself. But it is also impossible to completely close off air access - lack of ventilation will lead to the appearance of mold. That is why it is necessary to provide doors or windows in the design.

There are some other requirements:

• When arranging the screen, it is necessary to provide the possibility of quick access to basic communications.
• The product should not interfere with access to the bathroom, for which purpose it can have a special recess for the feet, which is very important for small rooms.

The first thing you need to do is make a frame to install the screen. It can be made from brick, metal profiles, or a block of wood. Moreover, it is better to make brickwork to install a tile screen so that it can withstand the weight of the material; in the case of working with plastic panels or gypsum board sheets, other options can be used. But let's talk about everything in more detail.

• Brickwork

This option is rightfully considered the most reliable. Such a base will withstand any material. Erect brick wall you need to go from one wall to another, laying half a brick. In this case, you need to make a new row with a slight shift to the side. We make a gap of 2-3 cm between the top side of the bathtub and the masonry, and after the cement mortar has dried, we fill the gap with polyurethane foam. Also, when arranging the masonry, do not forget to make a comfortable recess for the feet.

• Wooden sheathing

Such a frame will also be quite strong, but the main disadvantage of wood is that it begins to rot when left in damp conditions for a long time. Therefore, it is better to use cedar, alder or larch to create a frame. To equip the structure, you will need beams with a cross-section of 4*4 cm. When carrying out work, it is very important to correctly mark the places for installing the structure; by skipping this stage, you will ensure that the frame begins to move to the side.

To obtain a smooth structure, make markings:

1. 1. Draw vertical lines from the corners of the bathtub (which are adjacent to the walls) to the base, using a plumb line.
2. 2. Step back 3 cm and make a second vertical line completely parallel to the first.
3. 3. From the free corner of the bathroom, draw a vertical line and at the point of contact of the line with the base, draw a square with sides of 3 cm.
4. 4. From the inner corner of the square we draw horizontal lines to the walls of the bath.

This will be the perimeter along which we will install the wooden beams. We attach them to the base using self-tapping screws, after which we mount the vertical posts and secure them to the walls with self-tapping screws. We install horizontal wooden beam and fasten with a corner. Intermediate boards need to be installed from the corner posts at a distance of about 0.5 m. To achieve maximum strength, coat all joints with liquid nails.

• Metal carcass

When making such a frame, it is better to use the PN 27*28 profile, which is ideal for further installation of gypsum plasterboard, plastic and MDF panels. If you want to make a frame that can support tiles, it is better to use metal ones. profile pipes However, in this case you will be faced with the need for welding work. We carry out the markings in the same way as for wooden sheathing. We attach the lower guide to the floor using dowels, and install them on them side racks, securing them to the walls.

To give the structure strength, make a plank at the middle of the height. We fix the top profile on the side supports, and to strengthen the top guide, fold the two profiles together and secure them together. All that remains is to mount the vertical racks at a distance of 30-40 cm from each other. After installing the frame, coat the free space between the side of the bathtub and the structure polyurethane foam.

What to do if the bathtub is of a non-standard shape?

The most important thing here is to repeat exactly all the bends of the structure. For the manufacture of the frame, you can use a galvanized metal profile, and for cladding - extruded polystyrene foam maximum density. Before starting work, it is worth measuring the length of the bathtub and cutting a profile of a similar size, trimming it every 3 cm.

In the future, follow the following instructions:

1. 1. Attach the profile to the side of the bathtub and secure with tape. Bend it smoothly along the cuts you made and continue to secure it with tape at short distances. To hold the shape, also stick tape along its entire length.
2. 2. Carefully unfasten the profile from the bathtub and fix it to the floor, carefully moving it inward to the thickness of the profile. If you use tiles to create a screen, then in addition to the thickness of the material itself, add about 5 mm for glue and putty.
3. 3. Cut two sections of the profile (based on the height of the bathtub), attach to the walls with self-tapping screws. Cut the polystyrene foam into individual panels about 20 cm wide and insert each panel into the profile with the low end and the top under the side of the bathtub.

Immediately treat the inside with polyurethane foam. Install all panels, not forgetting to leave a small distance for the hatch. It can be installed after the foam has hardened. All that remains is to thoroughly putty the entire surface. After the mixture has dried, you can decorate the screen with tiles, plasterboard or other materials.

Making a screen with your own hands - step-by-step instructions

To create a high-quality screen, you need certain tools and materials that will allow you to do the job quickly and efficiently. The devices used in the work must be selected based on the material.

When working with plastic you will need:

• Bars for supports.
• Liquid Nails.
• Profiles with fastenings.
• Required quantity plastic panels.

Among the tools you cannot do without a stapler, a puncher, a cutting knife, and a square. Before you start work, be sure to measure the marking line so that it completely follows the outline of the bathtub. After this, attach the profile to the covering, and the fastening should be done from the inner edge (where you will install the plastic panels).

The use of liquid nails will ensure that there is no damage both on the bathtub itself and on all surfaces. We also fasten the panels to the bars using liquid nails: we fasten a piece of material from below along the top of the profile, since we need to additionally leave free space for installing the plinth. It is important to understand that to install the last panel you need to have skill; try to combine the first and last parts so as not to carry out additional trimming.

How to install a tile screen? Ceramic tile - popular material for the manufacture of screens, since this material has not only visual appeal, but also reliability and durability. We are also pleased with the huge variety of color and texture options. To install such a structure, prepare metal corners, drywall, tiles, and metal profiles. Everything here is quite simple: after assembling the metal frame, it needs to be sewn up with gypsum board sheets, and tile adhesive is applied on top and mounted tile.

To install a screen made of gypsum board sheets, you will need similar tools as when working with tiles. After installing the frame and gypsum board sheets, simply apply on top decorative plaster, cover with moisture-repellent wallpaper, for example, vinyl to decorate the front side of the screen.

Features of arranging a screen for corner baths

The corner bathtub has a non-standard shape; when creating the screen you will have to tinker a little, but the time spent will allow you to enjoy the result of your work for a long time.

It is best to make a curved product from plastic, since sheets of drywall are quite difficult to bend, much less install in this form on a rigid profile.

To mount the frame, install guides on the floor so that they follow the shape of the bathtub. Attach to the top panel using liquid nails wooden blocks to secure the top guide. A plastic panel of the required size is cut out and carefully inserted into the guide panel - the lower joints can be covered with a plinth.

A corner bathtub made of brickwork and decorated with mosaics will look no less effective. After completing the work, all joints on the structure should be sealed with moisture-resistant sealant.

In order to qualitatively equip your bathroom, you should not forget about the aesthetic side of the finish. If you think that after renovation it is enough to install furniture and plumbing and that’s all, then you are deeply mistaken. In some cases, communications running under the bathroom remain visible, which, of course, do not add aesthetics to the room. Therefore, the free space under the bathtub should be covered with something, and a decorative screen is ideal for these purposes. Often after repairs there is practically no money left, but to buy ready-made panels is not possible or there are other reasons, so you can make a bath screen with your own hands.

Aesthetics above all

IN Soviet times The free space under the bathroom, as a rule, was not closed, and no one worried about the aesthetic side of the issue. But time passes, technology develops and makes it possible to make a screen for a bathtub of almost any shape and style. Nowadays, special attention is paid to small interior details, because they can radically affect the overall picture of the renovation.

Screens for the bathtub can be purchased together with the bathtub or separately from it, but it is not always possible to choose the desired size and shape of the structure. Therefore, you can create a homemade bath screen that will not differ from the factory one either in quality or appearance.

And in this article we will tell you how to make a screen for a bathtub with my own hands, what is required for this, what material to choose and other useful things.

Selecting material for the screen

At the very beginning, before making a bathroom screen with your own hands, you need to decide what material will be used.

The most popular today are:

• plastic;
• acrylic;
• brickwork;
• tile.

Product requirements

Just like a factory product, a homemade bath screen must meet certain requirements:

• After installing the screen, there should be free access to communications. That is, the design must contain a door, window or canvas made in the form of sliding sections;
• Material or its protective covering must correspond to the special microclimate of the bathroom. In the bathroom there is almost always high humidity, and sudden temperature changes occur. Therefore the usual Decoration Materials cannot be used for the bathroom, because under the influence of these factors they will quickly collapse;
• After installing the screen, the bathtub should not rest on its plane.

Tip: The free space under the bathroom is often used as a niche for storing small items, household chemicals, detergents, etc. Also with internal and outside You can install additional shelves. This solution is especially relevant for small-sized baths.

Creating a brick screen

Brick is a fairly versatile material. In general, making a screen for a bathtub from brick is a classic option.

Creating a brick screen under the bathroom with your own hands is quite simple, you just need to know and take into account the peculiarities of the work process:

• The laying is carried out in a quarter of a brick;
• The screen is placed from one wall to another along the border of the bath;
• To create a correct and strong screen structure, each row of brick is shifted by half of the previous one (“stitched”), that is, a “chessboard order” is obtained;
• The space between the floor and the bathtub is not completely filled; space must be left for a door or viewing window;
• The last row of bricks is not placed close to the bathtub. A gap of 1-2 cm is left between the brick and the bathtub; it can be blown out with foam or a decorative overlay can be installed.

When making a screen for a brick bathtub, you need to remember that this is not a completely finished structure. After the masonry mortar has completely dried, it is mounted on top of the brick. decorative finishing, it can be tiles, laminate or mosaic.

Important! It is highly undesirable to use wallpaper, because high humidity and the temperature of the lines of service will be very short.

Making a screen from MDF

Screens made from MDF panels are quite popular, because with careful use and high-quality processing surfaces they can last long time, which sometimes amounts to 10 or more years.

Before making a screen for a bathroom from MDF, a special frame is installed from metal profile or wooden beams.

Important! If wood is used for the frame, it should be pre-treated with a special antiseptic.

When the frame is completely ready, you can begin MDF sheathing panels. To properly protect the material from moisture penetration, it is treated on all sides with a primer, and the points of contact with the floor are treated with silicone sealant.

The screen must have technical and ventilation holes approximately 2x5 cm in size. To make such holes look harmonious, you can install decorative grilles or panels for ventilation ducts.

Manufacturing of plastic screens

Making bath screens from plastic panels is much simpler than structures made from MDF. Because there is no process pre-treatment surfaces and decorative cladding, installation time is reduced several times.

Note: The undoubted advantages of plastic screens include easy installation and dismantling of the canvas.

Before installing the structure, you need to build a frame; for this, you should use a profile for the screen under the bathtub. Its installation is mandatory because it will fix the panel under the bathtub in the desired position. Thanks to this design it is possible to create sliding structure. This solution will allow you to rationally use the space under the bathroom.

The frame is made of several parts. Mounted first starting profile, which serves as a support for subsequent structures. The reliability of the installation will determine whether the structure will warp or not. Subsequent elements are mounted on special slides, along which the canvases will move.

Just like in MDF screens, plastic structures must have ventilation and technological holes.

We must remember! When making a screen for a bathtub yourself, you need to take care of sealing the area adjacent to the floor. This procedure can be performed with sealant. Such actions will prevent water from entering the space under the bathtub.

Decorative tile panel

The process of creating a screen from tiles is very similar to the previous ones, only here the pre-prepared frame is sheathed moisture-resistant plasterboard, after which ceramic tiles are laid.

Unlike previous designs, the tiled screen for the bathroom is made monolithic with your own hands. Therefore, before starting the installation, you need to think through the entire design of the screen where the communication will take place, ventilation and technical openings will be located. Since access to the pipes will be limited, at the very beginning you will have to take care of creating a window or door for servicing the communications.

Before making a bathroom screen from ceramic tiles, you need to decide on the material for the base. The best would be brickwork or plasterboard construction. The frame for plasterboard can be made of wooden blocks or a metal profile.

Ceramic tiles are laid using waterproof tile adhesive for kitchens and bathrooms, and the seams are sealed with a special grout.

Important! The grout must contain substances that prevent the formation of fungus and mold.

A few words in conclusion

So that the screen for the bathroom with your own hands is of high quality and creates cozy atmosphere indoors, use our tips on how to make a screen for the bathroom, and you can also study video tutorials and photo reports from masters.

Repair is a lengthy business. When in the process the “high-tech” style gradually turns into “hi-tak” - this popular quote reflects that renovation is indeed a rather complex and lengthy process.

And if this fate has not befallen you, and you are still attentive to detail and strive to achieve harmony of your desires, capabilities and chosen design - this article is for you.

Let's consider the renovation of a bathroom in which the bath itself occupies a dominant position. A bath screen is a special element in its decoration. You can buy it at almost any hardware store, BUT:

• firstly, this thing is very expensive (if more or less high quality);
• secondly, the manufacturer “stamps” mostly standard colors and shapes, and it is not a fact that the proposed product will correspond to your idea.

It is practical to choose sliding plastic screens, but it is practiced to produce them only for baths rectangular shape, corner ones - difficult to find. Installing them also takes a lot of effort and time. It’s easier, more profitable and more aesthetically pleasing to make a bath screen with your own hands.

Step by step installation

The entire installation process can be divided into stages, which we will analyze separately.

Step one. Selection of material for installation work

The best option is plastic - it is moisture and wear-resistant, easy to use (in this particular case, the same plastic was used as on the ceiling, creating a unified image as a whole). In addition to the panels, you must purchase:

• starting line the same or matching color;
• UD profile (not reinforced, ordinary) and fastening elements (dowels, screw nails);
• "liquid Nails".

And also prepare the tool:

• perforator;
• screwdriver;
• square;
• construction stapler;
• drywall knife.

Step two. Installation of a frame for a screen under a bathtub

The screen frame is modeled under corner bath for installing plastic. A broken line is measured on the floor, repeating one to one the contours of the curve of the bathtub - using a level, the points are transferred to the floor, and a line is drawn point by point. The profile is laid along the line. For this purpose, at the bending point, it is cut along the side edge with metal scissors into 10 cm pieces. Then we fasten it: at a distance of 13-17 cm from each other. Using a hammer drill, we make recesses in the profile and tiles that have already been laid along the line, we drive a plastic (spacer) dowel into the drilled hole, then we drive a screw into it with a small hammer (for reliable fixation).

Perform all this work very carefully, without using excessive force, so as not to damage the tiles on the floor.

Step three. Installation of the top part of the bathroom screen frame

We attach wooden blocks (20 cm from each other) to the inside of the bathtub hem. Why measure the thickness of the bar (about 7 cm in length and 3x3 cm in height and thickness, so that it fits into the gap between the tub and the hem) and use “liquid nails” (apply the side of the bar to the top and adjacent to the hem) and secure it until it is fixed.

Fastening with screws is impossible, since the entire aesthetics on the front side of the bathtub will be disrupted.

The starting strip will be attached to them. To install it, it is enough to use a construction stapler, although fastening with a self-tapping screw and a flat press washer is much more reliable.

Step four. Installation of plastic panels

The distance from the depth of the upper and lower mounted frame elements is measured, the dimensions are transferred to plastic (for right angle It is best to use a square), cut out the required length using a drywall knife.

On the first strip, since it will be the last one against the wall, a starting strip of exactly the same length is put on. On inner side Liquid nails glue is applied to the starting strip and the plastic is “driven” inside (this is very easy to do with the help of a metal ruler, for which, under pressure, slightly “open” the strip, insert the plastic with gentle force and pull out the ruler).

At the bottom, the strip can be safely fastened with metal screws to the profile (so that it remains behind the plastic, not on the front side), because eventually it will be installed below plastic skirting board, matched to the color of the floor tiles.

Secure the plastic at the top with staples (use a stapler), but you can also attach it with glue.

The remaining strips are installed and secured in the same way.

Be sure to ensure that there are no gaps left at the junction points between the strips.

Step five. Installing the last panel

The last stage is difficult, but doable. Measure out the remaining width of the strip needed to complete our screen, transfer it to plastic and cut it using a drywall knife. In place of the cut, put on the starting strip, which will be adjacent to the wall, insert the resulting structure from above into the side groove of the previous strip, carefully push it down and “drive” it into the upper starting strip using the same metal ruler.

At the very end, you need to attach the plinth along the contour (fortunately, it is plastic and bends well). And voila - your perfect bath screen is ready: bathe and enjoy!

We hope that this material will help you make a bath screen with your own hands without any problems. required sizes and shape.

A screen in the bathroom allows you to improve the design appearance of the room and create additional storage space for various accessories.

It is made from various materials and can be of several types.

In sales you can find factory screens for the bathroom; their advantages include speed of installation. On this, unfortunately, positive sides are ending. Disadvantages - unjustified high price, the presence of a gap between the screen and the floor and insufficient physical strength. In addition, it can sometimes be difficult to match the appearance of a factory screen to the style of the room. We do not recommend installing factory screens; from various points of view, it is much more profitable to make them yourself or order them from professional builders.

For the manufacture of bathroom screens they are used various materials, knowledge of their objective characteristics allows us to dwell on optimal solutions for each specific case. The table gives Comparative characteristics materials.

External finishing of the surfaces of bathroom screens is done different ways, from gluing patterns or designs on plastic film to covering with ceramic tiles. Wide variety of manufacturing options and decorative design screens puts inexperienced users in a difficult position when choosing. For them we will give some practical advice.

A screen in the bathroom is needed not only for decorative purposes, but also to protect the space under the bathtub from water leakage. Its presence causes the appearance of unpleasant odors and fungi. This means that when choosing a specific screen, choose the option that completely prevents water from getting under the bathtub. Water can enter not only during water procedures, but also as a result of pipeline breaks.

Do not forget to always provide access to the siphon, shut-off valves and other engineering communications. Today's plumbing products and equipment guarantee many years of use when installed correctly. Periodic cleaning of siphons is done with very effective means; there is no need to disassemble them, this relaxes the plumbers a little. But some cleaning products, if not used correctly, can raise the temperature to such values ​​that plastic pipes become soft, deformed at the joints and, as a result, leaks appear. In addition, small valuable jewelry can get into the bathtub siphon; they can only be removed from there after disassembling it. Conclusion - when choosing a screen, always ensure that you have access to the bottom of the bath. If having space under the bathroom for storing detergents is voluntary, then emergency access is required condition for all bath screen options.

The screen should be as strong, durable, beautiful and easy to clean as possible. Ceramic tiles best meet these conditions; all other materials, including plastic, are significantly inferior to them. But ceramic tiles can be laid both on durable brick surfaces and on plasterboard slabs. We strongly advise you not to use drywall to make screens; according to professionals, this is the worst option of all.

Conclusion - a screen made of bricks or foam blocks, trimmed with ceramic tiles, is considered optimal. Access for inspection and storage space for bathroom accessories is provided in this option.

And one last thing. Only this option can be used for acrylic bathtubs; they are so fragile that even with a slight load they change their shape. All screens, except stationary brick or block ones, have an extremely negative attitude towards any fluctuations in linear dimensions. As an example, we will take the most successful version of a bathroom screen - made of foam blocks lined with ceramic tiles.

Step-by-step instructions for making a stationary block screen

First you need to think about the location of the technical holes, prepare tools and materials. There is no problem in counting the amount of materials. And the tools you will need are a basic mason's kit, a tape measure, a square, a level and glue or a cement-sand mixture.

The standard bath height is 56 cm, buy foam blocks measuring 30x60 cm and 10 cm thick. These masonry materials can be placed on an edge, which significantly increases the stability of the structure and facilitates work.

If the blocks are slightly larger than the required size, this is not a problem; they can be cut perfectly with a hacksaw. If it is much lower, then you will have to place them on the edge in two rows in height. This is more difficult; it will be especially difficult to work with the last row.

Important. If you have a thin acrylic bathtub, then you definitely need to make a rigid support for the bottom, otherwise it will sag and cracks will appear in the grout.

For this you can use bricks or the same foam blocks. The emphasis will not hurt for a cheap metal bathtub. Some manufacturers have learned to save so much that they make bathtubs from sheet steel a few tenths of a millimeter thick. There is no need to talk about any strength in these cases.

Step 1. Check the position of the bath. There are cases when plumbers made a mistake during its installation; the problems should be corrected before finishing begins. Check the position of all sides one by one with a level and level the position if necessary.

Practical advice. Unfortunately, you can find low-quality bathtubs with an incorrect bottom slope. In such bathtubs, the water does not completely go into the drain hole; a little always remains near it. Later it dries out and dirty spots appear on the bottom. To eliminate this phenomenon, lift one end of the bath until the water completely goes into the drain hole. Lock it in this position. It’s okay that the sides are not horizontal; their slope is invisible to the eye. A few millimeters of difference in height are eliminated by slightly changing the width of the tile seam.

Step 2. Mark the location of the screen so that the facing tiles are flush with the side of the bathtub. To do this, take a level and place it against the side of the bathtub in a strictly vertical position, make a mark on the floor. Make such measurements at at least three points along the length. Connect them with a thin line, it will indicate the position of the facing tiles. Next, you should outline the lines for the blocks. Sum up their thickness with the thickness of the glue (no more than 0.5 cm) and the thickness of the ceramic tiles. Draw another clearly visible line on the floor at this distance from the first with a felt-tip pen. On vertical walls Using a level, draw the same lines.

Step 3. Prepare the solution and foam blocks. It is better to buy a dry mixture; its characteristics are much superior to self-prepared cement-sand mixtures. These adhesives are inexpensive and allow you to install directly onto existing ceramic tiles. There is no need to first tear it off, make notches with a grinder, etc.

Step 4. Try on the foam block. At the top of the bathtub it will have to be sawed off at an angle. Do this operation in several stages, repeating the fitting each time. This way you will be able to accurately adjust the dimensions of the block, which will have a positive effect on the strength of the masonry.

Step 5. Apply glue around the perimeter of the foam block approximately 2 cm thick, install it in place, check the verticality with a level. Linearity is controlled by a line drawn on the floor. Continue tiling the bathroom in the same way.

Step 6. Remove construction garbage, clean the nearby ceramic tiles from adhesive with a damp cloth. Leave the structure for one or two days for the mass to harden. Next, you can begin laying the facing tiles.

How to access the siphon

We have already mentioned that the quality of modern plumbing equipment ensures reliable operation for many years. But emergency situations may arise, the elimination of which will require access to the space under the bathroom. You can make access in several ways, each of them has its own strengths and weak sides. We will briefly consider all the options, and you yourself choose the method that is acceptable to you.

Work should begin only after the masonry with foam blocks has fully gained strength.

Step 1. Mark the hatch. It should be located on the side of the bathtub on which the connection is mounted engineering systems. First you need to mark off the lines for the location of the finishing tiles of the screen. The area of ​​the hatch should be equal to a multiple of the number of tiles; in most cases, four pieces are enough: two in length and two in width. Accordingly, the length of one side of the square will be equal to the length of two tiles. But the exact parameters depend on the size of the tile.

Step 2. Draw a square on the blocks in the selected location; the side of the square should be 3–4 cm less than the length of the two tiles. Cut a hole along the lines. This can be done with a grinder (dusty and noisy) or an ordinary hacksaw. To start working with a hacksaw, drill several through holes along the line and remove the thin bridges between the holes with a drill. This is how the initial cut for the saw is made.

These steps should be repeated on each side of the square.

Step 3. Start laying tiles on the foam blocks of the bathroom screen, leaving the prepared emergency hole free. When the tile adhesive has hardened, proceed to create an emergency hole. You'll have to work on it a little. The fact is that the tiles will only be held in place on narrow strips; such features require very careful work.

The four remaining tiles with reverse side cover with stretch film. The tiles should not stick to the blocks, but only imprint their mark. After the glue has set, carefully remove the tile, remove the film, coat the surface with sealant (it holds much more firmly) and install it in place. Grout the seams as usual. If necessary, the grout can be removed and the tiles can be removed without any problems.

After the repair work, all elements are installed in place. If there are concerns about the reliability of fixation of these tiles, then their position can be strengthened. To do this, you need to have a piece of metal U-profile for attaching drywall. It is installed vertically exactly in the middle of the cut square. Longitudinal slots are cut into the blocks under the side edges of the profile; the profile must fit in such a way that its surface is at the same level and the tiles are glued together. The free edges of the tile will rest against it, which will significantly increase their stability.

Video - Push inspection hatch under tiles

Plastic or MDF screen for the bathroom

This option is considered budget-friendly; all work can be completed within one day. It is inferior in quality and design to the one described above, but is quite suitable for small bathrooms. To make such a screen you will need aluminum or plastic profiles for sliding doors (they have two internal tracks approximately 3-4 mm wide), durable silicone glue, dowels, plastic or MDF panels of appropriate thickness and decorative handles. The tools you will need are a drill, an angle grinder, a level, a tape measure and a pencil or marker.

The marking is done according to the algorithm described above with one difference. Only one line is needed; profiles will be installed along it. The front side of the profiles should lie in the same plane with the sides of the bathtub.

Very important. If in the first case we allowed the position of the bath to be slightly different from the horizontal, now it should be set strictly according to the level. This is explained by the fact that the shape of the doors should only be square, otherwise they will jam and not open completely.

Step 1. Measure the dimensions of the profiles around the perimeter of the bath. Cut the profiles at a 45° angle. If the walls of the room have a slope, then the cutting angle needs to be adjusted; the presence of cracks at the junction points indicates a very low qualification of the performer. There is no way to hide these gaps; over time, dirt accumulates in them, and the appearance of the screen deteriorates significantly. If you don't have practical experience execution corner connections, then we recommend practicing on wooden slats. Good option, by the way, can be used as a template when cutting a profile.

Step 2. Mark the locations of the holes for the dowels. For vertical profiles, three are enough; in the lower horizontal profile, you need to check at least four.

Step 3. Place the profiles on the floor and walls one by one and mark the locations for the holes for the dowels. Drill holes in the wall and floor and insert plastic parts into them. Apply glue to the back side and secure the profiles in the dowels.

Step 4. The upper horizontal profile is fixed with glue to bottom surface bath sides. Before attaching it, thoroughly clean the surfaces from dirt, wipe them with solvent, and allow time to dry. Do not touch these surfaces with your fingers while applying the adhesive. Give plenty of glue; the excess will be cut off or covered up later.

Step 5. Take the exact dimensions of the sliding doors. Please note that they should be approximately 5mm larger than the screen frame opening. The doors fit into the groove of the profiles and are held in place due to their large dimensions. Cutting plastic is much faster with an ordinary grinder with a metal stone. Burrs on the reverse side are removed with a mounting knife.

Step 6. Drill holes for the handles and install them in place. Tilt the doors and insert them first into the upper profile and then into the lower one. Check for smooth running. If there are jams, find the cause and eliminate it.

Screen made of plasterboard

For this type of screen, you need to make a frame from galvanized metal profiles. To increase stability, additional vertical and horizontal jumpers are installed. Plasterboard boards are fastened with self-tapping screws, outer surface lined with ceramic tiles.

Video - Installing a screen in the bathroom with your own hands