How to put together a wooden box with your own hands. How to make a wooden flower box with your own hands

We are very rarely worried about things and objects that we are forced to use at home, at their summer cottage or in the office. We decided together with you to think about an ordinary wooden box. You can store different things in it, make a beautiful flower pot, a box for letters and correspondence out of it. We look at a photo of a wooden box for different purposes and tasks.

At a manufacturing enterprise, such a container is indispensable as a container, we will talk about the advantages a little later. The most important question that arises: "How to make a wooden box?" To make it, use chipboard, plywood and pine lath.

Today we will start making ordinary wooden boxes with our own hands from wood for correspondence or summer cottages. No special materials and tools are needed here, a standard home kit is sufficient.

Advantages and disadvantages of a wooden box:

• It weighs less than metal containers;
• Only natural material is used;
• Simple assembly of the structure, elementary elements;
• Strength is higher than ordinary cardboard and parchment;
• Low purchase cost of the material, wide distribution;
• With proper surface treatment, the service life increases.

Benefits of using a wooden box:

• Increased weight of transported things;
• A tree treated with an antiseptic lasts a long time.

Ways to use a wooden box:

• In domestic conditions for storage of vegetables, fruit and products.
• Souvenir packaging for a gift.
• Packaging of expensive instruments and equipment.

Attention! When making a box for a specific product or product, its dimensions and weight should be taken into account. Toy boxes have standard sizes and characteristics.

Required tools and equipment

Before embarking on a wooden box project, it is required to gather all the tools and equipment in one place.

We will need a woodworking machine, there must be a jointer and a circular saw. Otherwise, we buy the strips we need in the store - size and thickness. You can not do without a pencil, tape measure, building angle and hammer.

We will use the machine for raw wooden blanks, which we will make from a board of 2.5 x 25 x 150 cm.

Instructions for making a wooden box

We take a circular saw and cut it into the wooden elements we need in size, we get edged pieces. First, we cut along the edges, then set it to a width of 20 cm and saw it completely.

Be sure to wear safety goggles while working. It is better if you have a good partner holding the sawn boards.

Having installed the carriage at an angle of 90 degrees, we cut the board into 5 segments, 4 of which are 20 cm, and one more is 24 cm.

Set the planer parameters at a height of 1 mm and process each of the blanks from all sides to get draft versions of the board. For finishing work, the height value should be set to 0.5 mm. The thickness of the finished boards should be 2 cm. We will get boards 2 x 20 x 20 cm.

It is not required to polish the workpiece to a shine, the box will be used to store vegetables and fruits. Tool boxes are made according to the same principle.

We cut the remaining blanks in a width of 4.5 cm, taking into account the direction of the fibers. If you want to make the box ventilated, there will be 3 additional blanks in stock.

Wooden box assembly

The whole assembly process is very simple, no tricks and hidden mysteries. We take the most common nails 5 by 0.15 cm. Why thin nails? So that the structure is tightly fastened and the boards do not crack.

First, we nail the upper and lower planks from the end, then place the remaining wooden blanks. From below we fasten planks 24 cm long to the wooden base, use 35 mm self-tapping screws.

Drawings and dimensions of wooden boxes are presented below.

Wooden box as a flower pot

By its properties and qualities, wood is a versatile material, it can be used to make boxes where we will place our plants.

In the last example, we have already figured out that the tree is very easily processed to a fine state, you can remove absolutely all the bumps and make the surface perfectly smooth. Special skills and abilities are not required for this.

Below we offer to get acquainted with the options for boxes that you can make yourself without any skills with your own hands. The shape and appearance of the structure will depend on your personal imagination.

You can not use an electric tool at all when working with wood, saving a certain amount of money, but much more time will be lost, keep this in mind. With a set of all tools, you will get exactly what was planned in the shortest possible time without making almost any effort.

Be sure to stock up on paint and antiseptic to cover the surface of finished products.

If the box was originally planned for planting flowers, then you can first purchase ordinary plastic pots where flowers will be planted or plant them directly in the box. If you are going to plant in a box, do not forget to spread a film of polyethylene and make holes for drainage.

Photo of wooden boxes with your own hands

Drawer drawing, assembly and storage scheme.

For the manufacture of the box, we will prepare materials and fasteners:
- wooden plank 5x50x400 mm, pcs - 8;
- wooden plank 5x50x490 mm, pcs - 12;
- a wooden block of triangular section 50x50x199 mm, pcs - 4;
- metal building staples for a stapler (form "P", 0.75 mm thick, 11.4 mm wide, 14 mm high).

We start the assembly with the side planks

Side planks, with the help of a staple gun, are nailed with staples to wooden blocks of triangular section. Nailed planks along the contour should protrude 5 mm beyond the ends of the triangular bars.

We lay six boards on the bottom of the box at a distance of 18 mm from each other.

Along the edges of the stacked boards, we lay two transverse boards, nail the longitudinal boards to the transverse boards and get the bottom of the box.

We nail the bottom of the box from below to the ends of the triangular bars and to the bottom boards along the perimeter.

At a distance of 18 mm from each other, we nail the rest of the planks to the triangular bars.

Our box is ready.

Made boxes are well stored with each other and on top of each other. At the same time, air space is maintained between the boxes, which creates good ventilation for our vegetables and fruits. In the assembled boxes it is convenient to store and also transport the grown products in the garden and vegetable garden.

1. Basic principles
2. base model
3. balcony flowers
4. For seedlings
5. Design Ideas
6. Advantages

Recently, natural materials have come into fashion. Any products should be easily disposed of without harming nature. In this regard, wood will be an excellent alternative to plastic, from which you can build an excellent flower box. It will look organically on the backyard of a private house and on the balcony of a high-rise building.

Basic principles

Flower boxes can have different purposes, depending on this, design features are decided. The box can be used directly for planting and as a stand for flower pots taken out of the house.

The first option should be considered much more carefully. First of all, the material must be treated with a solution that protects against moisture. From constant watering, an untreated tree will quickly rot. Do not forget about the drainage holes at the bottom.

The second option is much simpler in design, it can be made from simple rails. Such boxes often perform the function of quickly taking home flowers to fresh air. Pots can be beautifully arranged inside and take flowers outside. In case of rain, capricious plants are easy to bring into the house and do not have to mess with each flower.

The box is a great alternative to a street flower bed. The flower bed is stationary, and the box can be easily moved and quickly change the atmosphere in the yard. They can cover the hatch, or other unsightly object. In addition, in a flower bed it is difficult to make the necessary mixture of soil for each plant.

base model

Despite its simplicity, the standard box leaves room for creativity. Combinations of basic boxes of different sizes will help create an original composition.

For work you will need:

• Board 50 × 100 mm for the manufacture of the bottom;
• Board 50×200 mm for side walls;
• Board 20 × 90 mm, the front part will be made from it;
• Self-tapping screws or stainless steel nails;
• Grid Chain-link to create a drainage system;
• Polyethylene film for additional protection of wood from moisture.

First you need to develop a design layout in accordance with your requests, and make drawings. It is better to plan the composition in advance so that the flower boxes fit organically into the space.. For example, if they are planned to be placed along the wall, then you need to measure the distance so that you do not have to then redo the protruding elements.

1. In accordance with the drawing, we cut the boards for the manufacture of the box;
2. We knock together the bottom and side boards;
3. We nail the front and back walls;
4. We cut out a piece of mesh of the desired size and attach it to the bottom with a stapler;
5. We cover the film to the height of the ground falling asleep, we make several holes above the drainage gutter for water to drain.

It remains only to pour the earth and plant flowers. This simple design makes it easy to stack flower boxes on top of each other and create a multi-level flower garden.

Carefully measure the size of the future design. Flower boxes often do not fit close to the wall, or vice versa are overlapped, be sure to take this into account when drawing up the drawing.

balcony flowers

Increasingly, walking down the street, you can see balconies and windows decorated with flowers. For outdoor decoration, it is better to use long, but not deep flower boxes. Their height should not exceed 20cm. The earth, especially wet, weighs a lot, so such restrictions are necessary.

The flower box can be attached with hinges, brackets or simply placed in a forged base. If indoor plants are taken for planting, it is necessary to provide for the possibility of removing the structure for the winter so that the flowers do not die.

There are a few tips to help minimize the maintenance of the balcony front garden:

• A box with flowers on the south side is better to paint in light colors, bright colors fade quickly. Preference is given to natural shades. Brown or green works well. The main rule is that the box should not be brighter than the colors themselves;
• Pay attention to the stability of the structure, poorly installed fasteners will not be able to withstand the desired weight;
• Drainage holes should not be located too close to the wall, otherwise dirty smudges will remain. It is better to place the holes along the far wall or provide for a slight slope;
• Flowers are often planted in 2 rows: the first is climbing plants covering the box itself, the second is the flowers of the main composition. This arrangement allows you not to pay much attention to the design of the box and put it together from simple boards.

For seedlings

The stores now have a large number of different containers for seedlings, but experienced gardeners know that production does not take into account many important nuances, among them:

• Fragile;
• Toxic material, which is often low-quality plastic;
• Lack of drainage holes or holes that are too large,
• Uncomfortable size.

All this makes the question of how to make a box with your own hands relevant. To do this, you need good boards, wood glue or nails, a drill. First of all, you need to calculate the dimensions and make a drawing. Seedlings, as a rule, are grown on the windowsill, and you need to adjust the box under it. For ease of carrying, it is worth immediately providing handles.

Excellent individual boxes for seedlings are also obtained from the tree, they are necessary so that the plants do not get tangled with roots. Considering that only young seedlings will grow, the height of the box should not exceed 10 cm.

It is better to assemble the main box with nails or self-tapping screws. For the manufacture of individual compartments, a special glue or stapler for furniture is suitable. It remains to decide how to make a wooden box with seedlings not only functional, but also beautiful. A little varnish or paint, a beautiful picture, and the seedlings will be an excellent decorative element.

Seedlings can become decoration of the apartment

Design Ideas

It is not necessary to make boxes with your own hands, you can take a ready-made wooden box. It can be an ordinary garden box, a tool box, even an old chest. A little decor will add color, but sometimes you don’t need to do anything, the non-standard use of the item speaks for itself, an example in the photo:

Don't be afraid to experiment and use things for other purposes.

Wooden tubs used to be often used at home for planting tall plants. Today they are appropriate in the garden. Several tubs with bushes can become an excellent hedge or act as independent elements.

Decorative flower boxes are often made with a bias towards naturalness.. The surface is varnished to protect and emphasize the grain of the wood. If paint is used, it is more often a noble brown or, on the contrary, light and delicate tones. The main goal is to draw attention to the colors, and not overshadow them with bright colors.

For decoration, you can use beautiful vintage patterns. Country style is suitable for a country garden. Not many people know how to make a box aged. A sample of a suitable size should be burned a little with a burner. Pay special attention to the corners and joints of the boards. Clean the surface and varnish. From above, you can make an imitation of an old stamp. Making such things does not take much time, but it greatly affects the color of the site.

Advantages

Everyone wants to decorate their garden in accordance with their ideas of beauty, but not everyone can order exactly what they want. Often scares the cost of work on an individual order. It is not so difficult to put together flower boxes with your own hands. This choice has many advantages:

• The cost price is much lower than the market price, and even more so, work to order;
• The drawing will help you do exactly what you want, and not choose from what is;
• A do-it-yourself wooden box will always be an original thing; few people can exactly repeat the design option;
• It is easy to assemble a box of the right size and the right dimensions on your own;
• With your own hands, you can make boxes of different shapes, but decorate them in the same style, observing the general concept of the garden.

Even a non-professional can make a flower box. Wood is a material that is easy and pleasant to work with. A regular ruler will help to make the correct markup. A box of flowers gives the site its own unique style, and you can rearrange it at least every day, updating the space in accordance with the mood.

The main advantage of a wooden flower box is the variability of solutions: you can do it yourself from the remnants of building materials, moreover, the dimensions and shape will be determined only by specific needs. Such compositions are extremely cheap, and with a skillful approach, they are in no way inferior to other decorative elements of landscape design.

The key advantage of the solution is the extremely low cost, and the possibility of creating a unique composition that is fully consistent with the interior or landscape design is also pleasing. The special structure of wood helps to maintain an optimal microclimate for plants, with a skillful approach, you can use the natural beauty and fibrous nature of the material.

All the shortcomings of such boxes are due to the susceptibility of wood to decay and biological damage. If you want to plant plants directly in a container, you need to take care of protecting the boards from contact with moisture and soil substrate. When used outdoors, wood is relatively short-lived, so it needs protective impregnations and paintwork.

What materials and tools will be needed for manufacturing?

To make a wooden flower box with your own hands, you need to prepare the following basic tools:

• electric jigsaw or saw;
• grinder;
• forceps;
• roulette with a square;
• plane;
• screwdriver;
• a hammer.

The design of the future box is selected in accordance with the equipment present: if all manipulations are to be performed manually, it is better to give preference to the simplest form. The presence of power tools allows, in turn, to realize any design ideas.

As base materials you can use:

• slats and boards with a thickness of at least 1 cm;
• cutting OSB;
• plywood sheets, including those having reuse.

Subsequent surface treatment will be carried out with the help of an antiseptic, a variety of paints and varnishes, stains. Nails, waterproof glue, self-tapping screws are suitable for connecting parts.

Manufacturing technology of a simple street model

In its most primitive form, the work is carried out in the following steps:

1. Boards, the width of which varies between 15-20 cm, are cut into blanks. Three long pieces will be needed to complete the bottom and sides, the ends will be decorated with two short ones (here, allowances equal to the thickness should be left on three sides).
2. The boards are planed with a planer, they can be sanded with coarse-grained sandpaper, the sections must be carefully processed.
3. Thin holes are made along the edges of the blanks: in the side parts - 3 each, in the end parts - 4 each.
4. With the help of screws, the sides and the bottom are first fixed, then the end blanks are attached.
5. The assembled structure is polished with fine emery.

All surfaces must be thoroughly impregnated with an antiseptic, varnish, stain or enamel can be applied on the outside.

Used cargo pallets are often used as the base material, this is a very cheap raw material that is easy to process. Instructions for assembling an outdoor flower box:

• the pallet must be disassembled with a nail puller; tongs will be needed to remove the fasteners;
• rotten and damaged boards are rejected;
• an approximate sketch of the box is drawn up indicating the planned dimensions;
• in accordance with the notes, wood is sawn, cleaned using sandpaper;
• assembly begins with fixing the lower base and upper frame;
• side faces are attached to two parts of the container with nails;
• joints are masked by narrow decorative strips.

Here also the final stage is the application of protective and paint compositions.

If necessary, legs made of beams can be nailed to the container, with their help, full ventilation of the lower edge is ensured. Flowers can be placed inside in pots or planted directly in a container. In the second case, it is necessary to cover the box with foil and equip it with drainage holes.

Decoration options

Miniature flower boxes made of wood are in great demand, in which vegetation directly serves as a decor: hanging stems and long leaves form a single composition in which greenery predominates.

Craftsmen decorate wood boxes with saw cuts (that is, with what remains after work), thin boards in the manner of a picket fence and figured thick trimmings of branches, peeled from bark and varnished.

Those who have the skills of figured woodcarving will not be difficult to make beautiful flower containers that imitate toolboxes, baskets, ships, and interior items in shape. There are no restrictions here - you can draw inspiration from the surrounding landscape design.

If you plan to use decorative boxes indoors, to create a single stylistic composition, you should pay attention to the possibilities of decoupage. Paints, brushes, glue and special napkins will help you easily transform any container, create a design element of the interior on its basis.

For those who do not like to overload the perception, we can recommend the monochrome design of the tree - for example, paint it in a bleached gray, lilac, blue or light green shade. Such pastel notes look juicy, but at the same time restrained.

Products can be floor and suspended. Variations mounted on high legs are widespread: they allow you to care for plants without squatting, which greatly simplifies all manipulations. To assemble wall models, you will need special holders: when choosing them, you must take into account the potential weight of the structure filled with soil and flowers.

Boxes hung outside the window are in fashion - they are fixed on the outside of the window sill with the help of special strong loop-like fasteners. Figured products, polished or stained, look especially impressive.

Hello everybody!

A toolbox today is a very indispensable thing for every owner. Most of us have a lot of different tools that we may not use very often, but nevertheless, we keep them, since not one repair can do without them. In order for the tool to be in one place, and it was convenient to transport it, we use special boxes. Often we just buy them in the nearest store, the range and variety allows us to do this. But why not make it yourself? The manufacturing process is not too complicated, anyone should be able to handle it, especially with a handmade thing, which is much more pleasant to use than a purchased option. This article will describe 4 different ways to make boxes, a photo report is attached.

Let's start making!

Manufacturing Method No. 1

We will need:

Material

Plywood;
- pine board;
- nails;
- wood glue.

Tool

- drill;
- a hammer;
- chisel;
- manual frezer;
- ruler;
- pencil;
- roulette.

The first step is to find the necessary material, plywood or trimming boards are suitable for this. Further, according to the presented drawing, it is necessary to mark up, then cut out all the details of the case. It is necessary to make special grooves in which the partition will be placed, for this we use a manual milling cutter, or another available tool.

The diagram shows the following body parts:

1 - wall (2 pcs.);
2 - sidewall (2 pcs.);
3 - bottom;
4 - groove along the thickness of the partition and a depth of 1/2–1/3 of the thickness of the material

When everything is ready, all elements of the box body should be sanded. Next, we assemble the body together, fix the parts with wood glue, and then additionally fasten with small nails.

Now we make a partition for the box, cut out a special handle, for this we use a jigsaw.

When the partition is ready, grease the grooves with wood glue and install it in its place.

Next, from the planks we make overhead handles, with the help of a planer we round the corners. Then we make tool holders from the rails, use a jigsaw, and a drill. The holes will serve for screwdrivers, and pliers, etc. will be installed in square cutouts. tool.

In order for the box not to get dirty, and to be protected from the environment, we cover the surface with varnish. As a result of the work done, we get such a homemade box.

Manufacturing method No. 2

Drawer-stool

Material

Plywood or OSB;
- wooden beam;
- self-tapping screws;
- wood glue.

Tool

Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette.

We take an existing sheet of plywood, make markings on it, and, according to the dimensions presented, cut out the lid (Fig. 1), then the longitudinal sides (Fig. 2) and sidewalls (Fig. 3).

Next, we take a wooden beam with a section of 40x50 mm, cut out a handle, and 4 legs with bevels at the ends at an angle of 15 °.

Next, we assemble the structure together, using self-tapping screws as fixing elements.

Parts layout:

1 - cover;
2 - tsarga;
3 - handle;
4 - leg;
5 - sidewall.

When everything is ready, use sandpaper or a grinder to round off sharp corners and clean the surface. Next, you can apply a protective coating.

The end result should be such an unusual tool box, which, if necessary, can be transformed into an ordinary stool, for this it is enough to turn it over and put it on legs, with it it will be convenient to reach the place we need, at a time when growth does not allow do it.

Manufacturing method no. 3.

Box for the young master.

Does your child love to craft? We offer to make a small box with him, where he will store his favorite tool.

To make a box with our own hands, we need the following

Material

16 mm boards;
- round wooden beam;
- self-tapping screws;
- wood glue.

Tool

Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.

First you need to take the existing boards with a cross section of 16 mm, then we make the markup, according to the dimensions provided, after which we cut the wood into the component parts we need.

The drawing shows the following details:

1 - sidewall;
2 - bottom;
3 - handle;
4 - handle stand;
5 - holder.

Using sandpaper, we grind the surface and remove sharp corners. When everything is ready, we begin to connect all the parts together, first you need to connect the bottom and sidewalls, then we put vertical racks along the marked lines and at the same time we put a horizontal handle.

We fix everything with glue and screws. Then we install special holders for screwdrivers.

Now you can paint, choose the color and coating at your discretion.

The toolbox is ready.

Manufacturing Method No. 4

The next version of the tool box is well suited for carrying various and necessary equipment for us, its appearance will be distinguished by solidity and reliability.

To make a box with our own hands, we need the following

Material

The board is not thicker than 12 mm;
- self-tapping screws;
- joiner's glue;
- pen;
- corners 8 pcs.;
- latch 2 pcs.;
- loop 2 pcs.

Tool

Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.

For the manufacture of the box we use such wood as: pine, linden or poplar. The most optimal thickness of the boards will be a thickness of 12 mm.

Next, we make the markup, according to the indicated dimensions in the drawings, after which we cut it into its component parts, as shown in the photo.

Full list of required parts.

In order to make sure that the wood was cut correctly, you need to put all the parts in a single box.

First, we assemble the bottom part and the lid of the box, for convenience we use clamps and corner clamps. We fix the parts together with carpentry glue.

Then, using a drill, we drill a hole for the self-tapping screws, we drill the holes.