Beautiful concrete figures for the garden with your own hands. Crafts from cement and concrete art for the garden with your own hands - photos of figurines and a master class step by step

From year to year the trend to decorate country gardens amazing flowerbeds, waterfalls with cascades, winding paths and rock gardens are gaining momentum. When decorating his site, any owner wants not only to transform the territory, but to get the so-called effect "to be different from everyone else." In order to make beautiful and original decor elements, it is not at all necessary to spend fabulous sums. After repair or construction, a small part of cement and putty always remains. Why not use them for business? Original figures made of cement, made by hand, will act as a "highlight" landscape design making the site more attractive and interesting.

Just look at this magnificent garden decoration. An exquisite garden figure can easily be confused with the work of a professional craftsman.

For many, the figure evokes interesting sensations that are difficult to express in words. Rather, it has a philosophical inner content, like feng shui garden figures.

The sculptural hand, in addition to its decorative value, also has a practical function. She acts as original stand for flower beds with ground cover and undersized plants.

To make a figure, we need:

• cement mortar;
• Putty on concrete for outdoor work;
• Strengthening impregnation for concrete;
• Fine-grained sandpaper;
• A pair of latex or rubber gloves;
• Container with high sides.

We make the solution from a mixture of cement and sand, maintaining a ratio of 3: 1, which we dilute cold water to the consistency of thick cream. To give the concrete figure unusual colors, it is advisable to use special pigments. Dyes are added to the dry mixture at the mixing stage and only then diluted with water.

To make a sculpture in the form of palms, we take gloves and gradually fill them with a solution, trying to avoid the formation of voids with air. Then the filled gloves are placed in a container, giving them the desired position.

Until the solution has hardened, you can safely experiment with the form, choosing the most best option: simply by closing the palms, folding them into a cam or interlacing fingers together

You can increase the strength of the figure by installing a frame: insert pieces of wire into the finger compartments filled with solution, trying not to damage the rubber with sharp edges.

Having decided on the shape of the sculpture, we leave the gloves filled with the solution in a container for 2-3 days. During this time, the solution will harden and acquire sufficient strength.

When the cement is completely dry, cut the gloves and remove them from the surface of the figure. We remove the remaining rubber with scissors and tweezers. At this stage, a lot of patience will be required, since the rubber will be removed in parts.

The original figure is ready. It remains only to choose a worthy place for her in the garden and fill it with a mixture for planting ground covers and succulents.

We cover the concrete figure with a layer of putty, carefully leveling the surface, and again leave it to dry for several hours. At the final stage, it remains only to sand the surface of the palms and cover them with a strengthening impregnation.

Exhibit #2 - elegant concrete flowers

A bright decoration of the front part of the house or a recreation area can be flowers poured from concrete. Harmoniously combined with green spaces, they look great both along the curb of winding garden paths, and against the backdrop of an emerald lawn.

The main advantage of such garden figures is their resistance to temperature extremes, due to which they are able to act as a decoration of the site for more than one season.

Making elegant flowers out of concrete is not at all difficult. To do this, it is necessary to prepare a form, which we will fill with a solution, and the cement filler itself. The easiest way is to use ready-made silicone molds designed for baking. Variety of assortment silicone molds quite extensive.

Flowers of various shapes and sizes can be made from silicone blanks: starting with ordinary field daisies and ending with multi-petal chrysanthemums and dahlias

For the manufacture of concrete flowers, we need:

• Cement mortar of the same proportion as in the previous example;
• Acrylic or oil paint for outdoor use;
• Machine oil or drying oil;
• Polyethylene film.

As forms, some craftsmen also use plastic bottles cut along, cut halves of rubber balls and other containers of a suitable size.

Since a key detail in creating flowers from concrete is the form, in order to be able to reuse it, the inner walls must be coated engine oil or drying oil. To increase grip ready mix and lightening the weight of the figure itself, it is desirable to add pieces of expanded clay to the solution.

We fill the form with a solution, tamping the contents as it is filled. Grasping the edges of the form, you need to shake it a little so that bubbles with excess air from the solution appear on the surface.

We cover the form filled to the brim plastic wrap and leave for a couple of days until hardening in a dry and hidden place from direct sunlight. After the concrete has acquired sufficient strength, we take out the flower from the workpiece and lay it out on flat surface. It takes 4 to 6 days for the figure to dry completely in a shaded place. We can fill the vacated form for the time being again, forming the next flower.

To prevent the formation of cracks on the surface of the flower, it is recommended to moisten the solidifying figure with water once a day. In the case when a crack nevertheless appeared, it is not difficult to correct the situation by covering the flaw with a liquid cement mortar. In order to increase the strength of the finished concrete flower, its surface should be treated with a strengthening impregnation, which can be purchased at the construction center.

To decorate a flower made of concrete, it is better to use acrylic paints, which are able to maintain the brightness of the flower throughout the season.

The choice of shades when decorating a flower depends on color palette flower beds and taste preferences the master himself.

Exhibit #3 - turtle made of sea pebbles

The motley tortoise, settling on suburban area, will help create that special atmosphere of coziness and comfort.

With its presence, the Tortilla turtle will certainly cheer up and delight children and guests of the site.

To implement the idea, you need to prepare:

• Medium-sized stones of any shape;
• Pieces of a metal rod;
• cement mortar;
• Impregnation for concrete;
• Acrylic or oil paints.

The dimensions of the figure depend only on the idea of ​​​​the master and volume. necessary materials. Having chosen a place to install the figure, we level the area for its placement.

From the stones we form a small hill, which outwardly resembles the body of a turtle. To arrange the paws of the figure at the level of the lower row of stones, we lay metal bars, which will subsequently serve as the frame of the structure. On the same frame, you can "plant" the turtle's head, or lay it on the ground. After the bottom row is laid and metal rods are inserted, we cover it with cement mortar. All voids between the stones should be filled and compacted with cement. By the same principle, we lay out the subsequent rows, carefully fixing the stones.

Having laid out the torso, we proceed to the manufacture of the paws and head of the animal. Choosing stones small size and lay them out in a slide around the bars. To fix the stones and give the desired semicircular shape to the paws and head of our character, it is better to use a solution of a thicker consistency. After we have formed and fastened the paws of the figure, we proceed to finishing work. To do this, we level the surface and plaster it with a more liquid cement mortar. On a layer of cement that has not yet hardened, we lay out sea pebbles.

Flat, smooth stones will perfectly imitate shell plates. To fix the pebbles in the shell, it is enough to slightly press them into the “plaster layer”

We leave the finished figure for 2-3 days for complete drying. After the concrete has hardened, the body and shell can be painted with special pigments, and flat sea pebbles acrylic paints.

Everything is not so difficult. A little imagination and patience - and a new memorable character will appear on your site, which will be a good addition to landscape design.

Building material - cement, being a unique, inexpensive and plastic substance can be used to make all kinds of crafts for the garden and courtyard area: flowerpots, planters, sculptures, boulder imitations and other arts and crafts products.

What will be required?

To make crafts from cement for the garden with your own hands, you will need the following materials and tools:

• Ordinary or white Portland cement not lower than M400;
• Clean, carefully sifted sand;
• Pure water;
• Sandpaper;
• Wire, old rags and polyethylene for making sculptures;
• Burlap or tulle fabric (for pots);
• Separating lubricant or grease;
• Color for cement or paint for cement;
• Container for mixing the solution;
• Shovel, trowel and spatula;
• Forms.

Craft options and manufacturing technology

From cement-sand mortar You can make various crafts for the garden and the surrounding area. The manufacturing method is determined by the dimensions, shape and purpose of the product.

At the same time, these can be: three-dimensional figures (fruits, boulders, mushrooms), flat figures (leaves, flowers) or household items that have decorative and applied value - flower vases and pots. Inexperienced craftsmen should, gradually complicating the task, start with the manufacture of the simplest crafts: planters, ladybugs, mushrooms, cylinders, cones and boulders.

Solution preparation

Main material for production garden crafts– . He is preparing in the following way. In any suitable container, three parts of sand are mixed with 1 part of cement.

Further, water is added to the mixture in small portions, everything is mixed until the consistency of “thick sour cream” is obtained. Moreover, if a concrete color is used, it, according to the instructions, is first added to the water.

DIY molds

There are two ways to make products for decorating the garden: either pour the solution into the finished form: a plastic bottle, half a ball, into an old unnecessary ball, etc. Or coat the wire frame with a solution, after stuffing it with old rags and polyethylene.

The exception is concrete flowerpots and planters. In the first case, concrete is poured into the space between the outer and internal form, and in the second case, a burlap or tulle fabric thoroughly moistened in a concrete solution is thrown onto a conical shape (usually a metal bucket).

The frame can be made from a plaster wire mesh, arranging either a solid figure (a boulder, a cone, a sculpture, a cylinder), or individual parts - a mushroom stem and cap, a turtle shell, etc. Further on finished frame cement mortar is applied with a spatula or trowel and evenly distributed over the entire surface of the product.

The finished product is carefully wrapped in a plastic film and kept at a positive temperature until it dries completely. The dried figure is processed sandpaper and painted with facade, water-based, enamel or car paint. Last operation produced in the event that the concrete color was not added to the solution, or the color for concrete is used as the main background.

When filling the form, a slightly different technology is used. In this case, the inner or outer surface of the mold (in the particular case, the side of the mold or molds that will be in contact with the cement) is coated with a release agent or grease. The solution is poured, kept for 3 hours until it sets, remove or destroy the form and, wrapped in plastic wrap, leave to dry completely. Surface finish as above.

Even for inexperienced gardeners who want to put their soul into their cozy home and yard, they get beautiful garden figures from gypsum with their own hands, a master class will help you figure out all the intricacies. The manufacturing process itself is simple. Before starting the manipulations, you need to accurately determine the idea and character in order to make the garden more comfortable.

Show all

Learning to create a master class

A master class on making stylish figurines will help you realize exclusive ideas and create a garden sculpture with your own hands. With absence special education or skills, a real exquisite antique sculpture will not turn out, however, everyone will be able to make a miniature plaster figure.

Original compositions are suitable for creating country decorative specimens. The cat, which is located near the flowerpots, looks cute. This animal can carefully observe the beloved mouse walking along the bright summer grass. An extravagant mixborder filled with flowers can also become a garden craft option. It is perfectly complemented by a snow-white marble angel. Such sculptures are able to recreate a romantic or ancient atmosphere, give summer cottage and a style garden. Using the master class, you will be able to get a garden beacon.

To make decorative and original craft, you will need to prepare gypsum or ceramic containers. There should be 3 of them, all of different diameters and volumes (small, medium, large). They definitely need to have pallets. Still need to use liquid nails, paint white color as a basis. Red tint is needed for windows, and blue for framing. In addition, the following materials are required:

• brushes;
• masking tape;
• centimeter tape;
• simple pencil.

To make the beacon look as natural as possible, a flashlight is attached to it in the upper part. In inner part each container should be attached to a pallet. All pots due to use liquid nails dress one on top of the other in a certain sequence. The smallest vessel is located at the top, and the bottom will be a large pot.

Next, you need to fill plastic cup paint of blue color(a little). This will make it possible to spread white paint. The result should be a heavenly color, in which the borders of the product will be painted. Connected pots color. Next, attach a miniature lantern. It will become an imitation of an observation cabin. The created craft is best placed on a spring green glade or in a garden among ornamental shrubs, near lawns.

Original bath made of plaster or cement

If you want to see unusual garden figures on your site, you can make a bird bath. Outwardly, it looks like a colorful rhubarb leaf. Multi-colored gypsum leaves are best placed near shrubs, trees, along paths in the garden. If available in the garden or on personal plot growing rhubarb, burdock with big leaves it remains only to make the following blanks:



A leaf of any of these plants should be placed face down, and a liquid cement mortar should be poured over it. After the solution dries, the sheet with sand is removed. Get a bath.

For greater beauty, it is necessary to lay out newspaper pages on the countertop, prepare a leaf of the plant big size, cement and sand. Pour sand on the newspapers, lay the sheet on top with the wrong side up. The sheet should be neatly straightened, its position is well fixed, for this you need to press it with your fingers.

Such cement crafts can be made more perfect in appearance, creating decor from pebbles. The birdbaths, made in bronze and gold, look stylish and pretentious.

To create a product from cement with your own hands, you need to dilute the dry material with water so that the mixture has the consistency of thick sour cream. Cement is poured onto a piece of rhubarb carefully, it should be covered with a solution over the entire area. The workpiece must harden.

With a cement sheet, you can do the following:

• decorate with bright colors;
• cover with lime;
• leave it in its natural state.

The finished sculpture needs to be strengthened. To prevent the cement from being washed away by water, the top of the bath is covered thin layer soil and a mixture that repels liquid.



Irresistible blooming plaster hand

The following master class will help you make a popular home-made garden figure in the form of a compact flower garden. It looks unusual, as it has the shape of a hand and is made of plaster.

To make a hand you will need the following:

• gypsum;
• several flower pots;
• rubber gloves.

At the first stage of manipulation, the rubber glove is filled with a solution of gypsum and water. The mixture should be thick. The glove is placed in flower pot, there it should freeze well. Fingers rubber product placed so that there is space between them inside. Then they pour in a small amount of soil for the plant. When the solution has completely solidified, the glove is cut off. As a result, a sculpture in the form of a hand comes out, which will stand not only for beauty, but also serve as a pot. Similarly, the desired number of exclusive flowerpots is created.



It is allowed to decorate the hand with paints different shades, you can leave the natural color.

Only dwarf crops are planted in such a flowerpot, preferably with a long flowering period, so that they delight with their beauty throughout the summer months. Such garden figures are usually installed in flower beds, where they look very appropriate.

Sculptures in which young, tenacious plants are planted have a decorative look. They are placed right on the ground in the garden along the path, on hanging shelves from wood, window sill, porch.



Creating a Miracle Mushroom

This master class will provide an opportunity to make gypsum mushrooms. The materials and tools are as follows:

• gypsum;
• building glue;
• pencil;
• compass;
• acrylic paints;
• beads for decoration;
• waterproof glue;
• thick needle or wood cutter;
• soap;
• brush;
• sunflower oil;
• water;
• food film;
• unwanted utensils or plastic containers for moulds.

The fungus will consist of a base, legs and hats. Before starting manipulations, prepare a mixture:

• sunflower oil (1 part);
• soap, grated (2 parts);
• water (7 parts).

The mass is smeared on a film, which is wrapped around a container for molds.

Gypsum does not dissolve immediately. It hardens quickly, so you first need to prepare the form. On the packaging with the material there is an instruction that must be followed. For the stem of the mushroom, a cut plastic neck will be an excellent shape. The form is well lubricated with a mixture. A smaller container is placed in the center. It will help to make the leg empty inside.



Gypsum is poured into a mold, a smaller vessel is set in position with a stone or other object. With the help of a knife, after the material has solidified, a small bottle is taken out. A deep plate is used as a form for the hat. The steps are repeated similarly with the procedure for creating a leg. When the plaster begins to dry, a leg is inserted into the middle. After the material has hardened, the mushroom is removed from the mold, the film is removed.

When making the base, it is better to give preference to the removable option. The form for this should be larger. Manipulations with plaster are similar to the described actions. The leg of the mushroom is wrapped with a film so that it is convenient to pull it out. It is set at the moment the mixture begins to set. The product will be ready after final drying. For decoration, glue different beads, flowers.

The fungus is primed. Apply glue, which is diluted in water. You can use a special building soil. It hardens in 2 hours. Then you can decorate the product, and after the paint has dried, apply varnish.



Fairy gypsum caterpillar

Garden sculptures can be magical. The caterpillar in a reduced form will perfectly complement the gypsum mushroom. You can make such figures with your own hands separately.



For the process of creating a caterpillar, use the following:

• gypsum;
• waterproof glue;
• acrylic paints;
• brush;
• priming.

Gypsum must be diluted to such a consistency in order to obtain a semblance of a liquid cream. First you need to fashion 10 circles different size which are slightly flattened with your fingers. Separately, make 2 balls of the desired size (if the caterpillar is funny, you can make more of them). These will be her eyes. The constituent elements of the fairy-tale heroine should dry well.

Then the parts are glued together with glue. The sequence can be any, it is not necessary to follow the geometric sequence from big ball to the little one. Having made the body large head stick eyes.

The caterpillar must be completely primed. It should dry within 1.5-2 hours. It is best to decorate the product with acrylic paints of bright colors and again wait for them to dry completely. The finished caterpillar is carefully varnished. You can cover it with several layers of varnish. Between manipulations, you need to wait a little for the first layer to dry. The completed figurine should be installed on the fungus, next to it or independently among flowerpots.



Gypsum as the best material for crafts

The use of gypsum is quite common when decorating a cement garden. The main requirement for gypsum products is their resistance and strength to factors external environment, and, in particular, to rain, snow, hail. In most cases, you do not need to observe absolute accuracy in the image of any figure. garden figures small sizes are molded without creating a foundation.



If you want to make an impressive sculpture that will have upper and lower limbs or other parts of the body, clothes, you should create a metal frame. For this purpose, metal rods are cut into pieces of the desired length. Then they are welded, creating a single frame. It should visually recreate the skeleton of a potential statue.

In the course of the manipulations for the manufacture of the figure, one cannot forget about the details - the protrusions at the foot. Thanks to them, the sculpture will be able to be firmly fixed on the prepared foundation. A plaster figurine can easily cheer you up if done in a humorous style. If you don’t want to create a pompous product, you can make a funny animal, for example, a cat, dog, dolphin.

To obtain a product from gypsum, glue is added to the diluted material. Its amount is determined by the volume of the figure - take 1%. To make the finished thing as strong and beautiful as possible, gypsum is applied gradually and in layers. After applying a layer, you need to let it dry, then the next one.

Gypsum products can carry a semantic load, act as amulets. You can create guardians of garden flowers and other plants, for this it is worth making gnomes. With their brightness, good-natured look and cheerful look, they will cheer up guests even on cloudy days.

It is not necessary to make too many sculptures for the garden with your own hands. Everything should look natural, it is important not to overdo it, because nature itself is fabulous. It just needs to be improved slightly. After making a simple plaster figure, you can be inspired and create something else. Several unique pieces will complement each other, especially if they harmonize stylistically.

Good day. April outside. Many gardeners are already preparing for the summer season. They not only plant plants in their garden, but also love to decorate it. Lately it has become especially fashionable to decorate your garden with crafts from waste material- plastic bottles, tires and so on. I also decided to decorate my garden with handmade crafts. And I made a forest clearing with mushrooms and hemp.

To make it I needed:
- A semi-circular plastic plate and a small plastic ball.
- Cement, sand, water.
- Disposable cups (volume 0.5 l. and 0.1 l.).
- Knife.
- Form for pouring (an old leaf for the oven).
- Brushes.
- Oil paints.
- Green plastic bottle.
- 5 liter plastic bottle.
- Primer for painting.
- Masking tape.
- Scissors.
- Matches, a candle.
- Sandpaper.
- Glue.
- Optional (flowers, butterfly, ladybug).

First, I took a plastic plate with a round bottom, for insurance, greased it from the inside with a drop of sunflower oil, so that the mushroom cap would come out well. I diluted the cement solution and poured it into a plate. As you probably already understood, this is the future mushroom cap.

A little later, when the cement had already set, but had not yet completely solidified, I took a 0.5-liter disposable glass, cut off its bottom and placed it on top of the cap, bottom down and also filled it with cement solution. The mushroom is ready.





I left the mushroom to dry for a couple of days in a warm place. Then without difficulty I took it out of the mold, I also removed the glass from the leg. I also made two small mushrooms. I poured the hats into a small plastic ball, which I first cut in half, and the shape for the legs was disposable cups volume 0.1 l. When the mushrooms were completely dry, I sanded all the uneven edges with sandpaper.





Mushrooms are ready, it's time to make a stump. For this I took a 5 liter plastic bottle cut off her lower part desired height.





Glued the workpiece with outer side masking tape, so that the cement sticks better. The blank for the stump is ready.





Since I wanted to make a clearing, I needed a form to fill it. I thought for a long time what to make it from, and then the idea came to my mind to use an old baking sheet in the oven. I took a leaf, filled it with cement mortar and installed a stump blank and mushrooms inside. All this was left to dry for a couple of days.





Once everything was solid and held together well, I started shaping the hemp. Once again, she kneaded a solution of cement, sand and water, slightly wetted the stump blank with water and began to apply cement to it. I smoothed out all the bumps with a damp brush. Inside the stump, I also applied cement to the sides of the bottle and to the bottom. When I liked the shape of the stump, I left it to dry until completely dry. Here's what happened.





Then I sanded everything again until smooth. The remaining dust was swept away with a soft brush. I applied a primer for painting. When the primer was dry, I painted everything oil paint. Stump turned out Brown color, mushroom caps were painted dark brown on top and light brown on the bottom, grass was painted green.





I let the paint dry and then I started additional decor forest clearing. I took a green plastic bottle, cut off a strip from it and with the help of scissors gave it the shape of grass. I deliberately cut off an uneven strip, since the grass should be of different heights.

When I take my forest clearing into the garden, I will put a pot inside the stump and plant flowers in it. It will look very nice. I hope you enjoy my garden craft.
Goodbye, see you again.

Concrete sculptures have many advantages over products made from other materials. Concrete is more flexible than a natural stone and therefore easier to work with. Such products are resistant to weather influences, they can be left on the street, only periodically updating the coating. Another plus is that even a small figurine weighs a lot, and therefore you can not be afraid for the safety of the garden decor, on which you have worked hard. This article tells how FORUMHOUSE members make crafts from cement with their own hands.

Concrete sculpture: master class

The first step towards creation is working on a metal frame, on which the solution will then be applied. To get thick parts, you need to wrap the frame with a fine mesh or wire. The second way to make crafts from cement for the garden is molding, when the concrete solution is poured into special forms, and after hardening, the two halves are glued together and the product is sanded.

Nutabena advises filling the insides with various rags to save cement.

If you do not have much experience working with cement, it is unlikely that you will succeed in the perfect craft for the garden the first time. You can start with the most simple crafts. So that the errors can be corrected, glue is added to the cement for crafts. The required color is given with the help of a pigment added to the composition, or a finished figure is dyed. With the help of paint you can imitate others natural materials: granite, marble, wood, etc. At the end of the sculpture concrete mortar covered with an anti-graffiti and anti-corrosion coating, which keep the products unchanged for several decades.

A forum participant, summer resident RUS_095 (Moscow) talks about this technology for creating concrete sculptures, which Ukrainian master Vladimir works on.

ENG_095 FORUMHOUSE User

The solution for the product is made from a mixture of cement and sand in a ratio of 1: 2. The cement is applied to metal carcass, from which the excess is then cut off. Products are painted with ordinary facade paint.

From simple to complex

Galina Ara offers to try her hand at simple figurines, make a mushroom. At 1.5-2 l plastic bottle cut the neck to the "shoulders". Prepare a solution: 1 part of cement, 3 of sand, add water to the consistency of “cottage cheese in a pack”. Fill the bottle to the top, set to harden. Then cut and remove the plastic - the mushroom leg is ready.

Make a hat with a metal or plastic bowl right size: lubricate inner surface sunflower oil or grease, put the solution there to the very top and let it harden a little. When the solution can be cut with a knife, make a hole 6-7 cm deep in the middle. The diameter should be slightly larger than the diameter of the top of the leg. Wait again for the concrete to harden even more, then carefully turn over and remove from the mold. Sharpen the edge of the cap with a knife.

Do-it-yourself garden sculptures made of cement.

Decorate the hat: make a hole in it, roll a worm out of the solution and shove it halfway there. After the final drying, cover the figurine with a primer and paint. Be sure to wear gloves before starting work.

Galina Ara makes jewelry made of cement less than 150 cm in size without a frame and fittings. A piece of soft monolith, from which a figure is then cut, can be made using sheet metal: roll it into a pipe of the required diameter and tie it with a rope. Then fill with mortar and leave to dry.

The disadvantage of the method is that it will not work to make figures with protruding parts, with outstretched arms, etc.



More complex country figures need reinforcing elements. The forum member did the cat in this way. At first they blinded everything except the head. Then, while laying the cement into the mold, I stuck two fittings of the required height and made the frame of the head and ears from thin wire. When the solution (up to the lower jaw) hardened well, I put the pipe again, but this time on a frame of boards at the level of the neck. I cut out the bottom with a hole for the neck from plywood and filled it with mortar. I cut out the head without removing the wooden support. After 2-3 hours, I removed the frame, and smeared the border with a solution.

What else can be done for cement: an activity in Arinka's class

Drinking bowl for birds "Autumn leaf"

Take a large leaf of burdock or rhubarb. Lay cellophane on the table, make a hill of wet sand, form a mound in the middle to give the sheet depth. Cover the slide with cellophane. Lay the sheet with the veins up, straighten it.



Mix non-liquid concrete: 3 parts sand, 1 cement, water. Put the cement on the sheet: the thickness of the cement mortar in the middle should be 2 cm, reduce to 1 cm towards the edges. Then insert plastic tube with a diameter of 10 cm and a height of 10-15 cm. Coat it with a solution at the junction, fill the pipe cavity with concrete. Cover with cellophane, leaving gaps for ventilation, and leave the product to dry.

Do not turn over the concrete leaf earlier than after two days!

After the concrete has dried, remove the sheet. If it comes off with difficulty, moisten lightly with water. The leaf can be dyed twice yacht varnish with the addition of golden, red and orange colors. It turns out garden sculpture high class!



Waste bin

Arinka put together a trapezoid from old scraps. The size is larger than the diameter of the container that is inserted into the middle of the mold. Then nailed to the walls of the form wooden base. The walls, the bottom of the mold and the bucket were covered with plastic wrap, secured with tape. Reinforced with fine mesh. The cement mortar was poured into the mold, making the bottom of the urn (thickness 8-10 cm). Then I inserted the cellophane-wrapped bucket into the mold, put the burdock leaves against the walls and gradually poured in the solution, holding the leaves so that they did not slip, and leveling the bucket in the center.



The urn was covered with cellophane for 5-6 days. After drying, I turned it over, unscrewed the screws in the bottom, dismantled the walls. The leaves were washed away with a stream of water. The top of the urn and the sharp edges were sanded with a disk. Painted the urn. The product can be decorated sea ​​shells. Flowerpots, etc. are made according to the same principle.



More ideas

Frau made original decorative stones and figurines from the remnants of cement left over from paving the paths in the country: she put them in piles and two days later cut out the contours with a knife. wire and metal mesh reinforced only thin crafts.



You can increase the plasticity of the solution with the help of PVA, reduce moisture permeability - with "liquid" nails.

Olika made beautiful swans to decorate the plot, using an inverted basin, wire and wet strips of an old duvet cover. She sculpted, then poured water and wrapped it with polyethylene so that the cement would seize. A day later, I unwound the film and spread another layer, already without fabric. The neck was done gradually, over five days. The figure was painted with oil paint in two layers. Pebbles in the "lake" - gravel sprinkled with spray paint.



Nyura5 proposes to make a frog for a dry swamp out of cement and bricks with rubble. Blind the model of the figurine from any plasticine, and sculpt a sculpture from it.



Turtles and ladybugs- options that are easy to manufacture: they can be made from an old soccer ball cut in half. Just put the polyethylene on the bottom and pour the solution. Figures can be decorated with fragments of multi-colored tiles.



Waldschnepfer in his dacha fantasizes about the statues of Easter Island. Heads can be made empty: plant some plants there, forming a kind of hair.



Large statues for decorating a summer house will require a significant amount of time. They can be used as a basis thick log or a bucket. Wrap the base with wire mesh. Nose, lips, eyebrows and other small details can be made from Styrofoam by attaching them to the structure reinforcing mesh, and filling the gaps mounting foam. Coat the frame with cement, dry and paint. The garden keeper is ready!

According to the materials of the participants of the forum "House and Dacha"