We make a fence from a welded mesh with our own hands. Ways to build fences from a welded mesh How to install a metal fence from a welded mesh
Often, welded fences are used to protect parks, gardens, and home gardens. They are not as beautiful as forged sections, but despite this they are in demand and popularity. There are many types of welded fences, they differ from each other in terms of installation.
Advantages of a welded fence:
- has strength and durability;
- cushioning when repelling an impact (for example, if a car drove into the structure);
- fireproof;
- does not cast a shadow on plants growing nearby;
- in combination with climbing plants, you can create landscape compositions.
- does not protect from wind, dirt and prying eyes;
- needs anti-corrosion treatment;
- installation requires skills in working with a welding machine.
More details can be found in the video:
Varieties of welded fences
In the construction market, the buyer can find many options for welded sections. Experts divide them into:
Reinforcing welded fence is the simplest and most economical option. Pros - ease of manufacture and ease of installation. Cons - Looks unattractive. Rebar fences are usually installed as temporary structures.
Another budget option for fencing is a welded fence made of sections - this is a more advanced version of a reinforcing fence - reinforcement or profiled pipes are placed in a frame prepared in advance. Its installation is quite simple and does not take much time. Outwardly, it looks aesthetically pleasing and attractive, in addition, such a fence will protect your site from the invasion of uninvited animals.
An order of magnitude more aesthetically pleasing and attractive is a metal welded fence made of metal profiles. The process of its manufacture is more time-consuming and requires significant financial costs, but in the end you will get a solid and attractive design. Particularly pleased with this version of the fence lovers of privacy, because the sections of the metal profile are opaque. But gardeners and gardeners consider it a disadvantage that, because of the shade near the sections, it is impossible to plant trees and garden crops, because it will interfere with their normal growth.
Welded fences with decorative trim are the most beautiful, but they are also quite expensive. Many craftsmen are engaged in decorating on their own, this allows you to reduce the cost of the process.
If you do not think about the financial side of the issue, then you can order a forged fence. It will serve you as long as possible, while you can not be afraid that it will be touched by corrosion. Also, the advantage of a forged fence is that it does not need decorative elements.
You can buy a ready-made welded fence or make sections yourself.
We make a welded fence with our own hands
For load-bearing pillars under a welded fence, natural stone, brick, metal, profile pipes 15x15 or 40x20 mm, or steel strips 25x4 mm are suitable. If metal pipes of small diameter are used for support, they may not withstand the weight of the structure and bend. Large diameter pipes do not look very attractive, so experts recommend choosing square profiled pipes. Their ribs create structural rigidity and give additional strength and resistance to bending.
Before installation, it is necessary to carry out preparatory work - measure and mark the area under the fence, cut the metal structures of the required size, dig the foundation, install the posts and fill the base.
Bearing columns should be at a distance of up to two meters from each other. In this case, the spans between the columns should be even, so calculate as follows: measure the distance between the edges of the site, divide it by two, and you will get the required number of columns.
Then you need to calculate the height of the columns. If you put a metal profile fence, then its height will be equal to the height of the sheet. In other cases, one and a half to two meters is considered the optimal height. A fence of this height will protect you from the intrusion of neighboring animals and uninvited guests. The height of the columns should be 40 centimeters longer than the sections (the columns go into the ground at this length).
Pipes are sold in standard lengths of 3 m, 4.5 m, 6 m. For a fence above two meters, three-meter pipes are suitable, and supports of a different length can be cut to the desired size right in the store - cutting is inexpensive, and greatly facilitates the transportation of material.
When the pipes are purchased, you can proceed to the next stage of work - preparing the pits for the foundation. You can dig them with a drill (garden or electric) with an auger diameter of 20-25 cm, the depth of the pit should be 40 cm. Insert the posts into the dug holes and drive them into the ground by 30 cm. When doing work, do not rush and do everything gradually, because it is important so that the base is perfectly level.
Then it is necessary to prepare a concrete solution (the ratio of cement and sand is 1: 3), for strength, broken stone or small gravel is added to it. For additional stability of the structure, the pit is covered with a 10 cm sand and gravel pillow. Fill the pits with mortar and leave for 3-5 days.
Installation of reinforcing welded fence
Necessary tools: a welding machine, a set of electrodes, a saw for metal or a grinder, gloves.
Reinforcing fencing is an unreliable structure, it is used as a temporary structure. For a more durable structure, reinforcing bars with a diameter of more than 1 cm or a profiled pipe should be used.
The installation of the fence takes place in stages:
- measurements are taken;
- pipes or fittings are cut;
- are welded.
It is also necessary to solve the design issue. It is easier to mount the pipes horizontally to the ground surface, but often the rods are installed parallel to the posts. If you choose the first option, then the length of the pipe should be equal to the distance between the supports, and if you choose the second option, the height of the column. Also, for the second option, you will need two pipes that need to be welded to the posts - they will be the bases for all the rods.
First of all, the load-bearing crossbars are welded. When performing welding work, monitor the continuity of the seam - if there is poor contact or the hand is broken, then it is better to beat off the part and weld it again. Then the bars are welded to the crossbars, they must be at the same distance from each other and have the same length. From which side to weld - from the inside or the outside - according to the technical characteristics, it does not matter, it all depends on your desire.
Installation of a sectional welded fence
A sectional welded fence is mounted in much the same way as a fence with a mesh. Some immediately after installing the posts weld a grid to them, but doing so is highly undesirable for a number of reasons:
- such a structure is easily damaged;
- the mesh will quickly deform and begin to dangle;
- the mesh is easy to bend and crawl under it.
Therefore, a sectional fence is more practical than a mesh fence. The phased installation looks like this: installing the frame, fixing the floor, installing the sections.
For the construction of the frame, it is better to use metal corners, firstly, they are lighter than pipes, and secondly, they hide the weld. The height of the frame should be the same as the fence, and in width - 5 cm less than the distance between the supports. Outwardly, it has a rectangular shape. Reinforcement, profiled pipe or mesh is used for overlapping. The last option has the least weight, so it is chosen most often. Whatever floor material you choose, you need to cut it off along the inner corner and weld it along the entire inner surface of the corner. Follow the continuity of the weld - you can’t tear off your hand during welding, because then you won’t be able to weld the rod or mesh again.
Fences made of mesh are very popular, they are indispensable in cases where you need a reliable fence with good light transmission and a low price. In addition, modern fences made of welded galvanized mesh are very attractive, durable and easy to install with your own hands.
Classic country fence made of galvanized welded mesh
Advantages of galvanized mesh
Produce galvanized wire mesh. Its rods are arranged perpendicularly and fastened at the junction points by welding. The cells of the welded mesh are made rectangular, square, less often rhomboid, trapezoid or other shape. The wire for the grid is used galvanized or with an additional polymer coating.
Galvanized wire mesh fencing has its advantages:
Types of mesh welded fences
Depending on the type of coverage, it is presented in the following forms:
Also, galvanized mesh can be produced in the following types:
Drawing of a section of a galvanized mesh fence
How to choose a galvanized welded mesh fence
Features of installing a galvanized mesh fence
There are two ways to install a galvanized mesh:
- Tension of the canvas between the pillars;
- Installing sections.
The first option is cheaper and easier to do it yourself. But the second option is considered more aesthetic and stronger.
If you do not purchase ready-made welded spans, the sections will have to be made independently from corners or profiles.
Fence posts can be both and. Of course, if you build thoroughly, you should use steel supports with a cross section of 6 to 12 cm.
Pole installation
Installation of mesh on supports
To stretch the rolled mesh, hooks are welded onto the poles. Also, special poles with hooks can be purchased ready-made.
The galvanized mesh is hooked onto the first post and stretched with tension to the next support and put on the hooks again.
One of the options for attaching fence sections to poles
To make the galvanized mesh fence stronger, a wire with a diameter of 4 mm is threaded through its top and bottom. The wire is welded to the pole.
It is evenly difficult to stretch the mesh with your own hands, so it is advisable to invite an assistant and, having passed a crowbar or rod from the bottom and top of the welded mesh, pull for them. After installing the fence, the hooks are bent.
The sectional fence is either welded to the posts or fastened with pipes and clamps.
The fence performs several functions at once - protective, decorative and aesthetic. There are several types of fences: stone, brick, metal or wood. Welded structures are ideal for creating a fence of the desired height, strength and configuration. Learn about the features of manufacturing a sectional steel fence.
Sectional metal fence: advantages and disadvantages
The metal sectional fence is widely used for a protection of public institutions. This is due to its following advantages:
1. High level of durability.
Metal - differs in the increased rigidity and well resists mechanical loadings. A sectional fence is a high-strength structure that can easily withstand wind loads.
2. Long service life.
With proper metal processing, such a structure will last more than 20 years. To protect against corrosion, special antiseptic compounds are used. In addition, painting the fence also significantly extends the life of the fence. The metal perfectly tolerates temperature fluctuations, moisture, ultraviolet radiation - it does not collapse under the influence of these factors.
3. No restrictions on size and configuration.
Sectional steel fence comes in different sizes. In relation to the appearance, fences with a mesh, stakes and even 3D fences are distinguished. By adjusting the size of the sections, the appearance of the fence changes
4. Possibility of self-manufacturing.
If you have basic skills in working with a welding machine, a few days are enough to make a fence. The main thing is to pre-install the supports, and, if necessary, build a foundation.
5. 3D designs are distinguished by additional functions.
Installing such a fence on the site additionally protects pets from escaping from the house. In addition, the appearance of such a design is unusual and attractive.
Welded mesh structures are distinguished by low weight, ease of installation, long service life, resistance to aggressive environments and affordable cost. In the presence of defects, damaged sections of the fence are easily replaced.
Types of sectional fences - their description and characteristics
For the manufacture of steel mesh, wire is used. The first version of the fence - with a welded structure, is based on the use of a home-made mesh. For these purposes, you will need a spot welding machine. In this case, it is possible to adjust the size and shape of the cells. To prevent corrosion of the mesh, the wire is coated with a polymer or galvanized coating. The result is the perfect fencing fabric.
In relation to the type of mesh coverage, the following types of fences are distinguished:
- welded PVC mesh - different in green, for coating, the material is immersed in a special liquid or treated with powder in the working chamber;
- galvanized fence mesh - there are two manufacturing options: according to the first, the mesh is welded after applying a galvanized coating, and the second option is based on applying a galvanized layer to the finished mesh, such material is more durable and practical to use;
- non-galvanized mesh for sectional fence has the lowest service life, as this coating is unstable before corrosion and quickly becomes unusable.
In relation to the materials for the manufacture of a sectional fence, there are such variants of it:
1. Sectional fence with chain-link mesh. The easiest option, for the manufacture of which one day is enough. Affordable cost, ease of care, ease of operation and quick restoration, if necessary. The fence perfectly protects against foreign intrusion, has a low weight and does not close the space, at the same time protecting against small living creatures.
2. Sectional wood fence is an environmentally friendly option. Among the advantages we note:
- affordable cost;
- ease of processing wood;
- various shapes and configurations;
- unusual appearance.
However, the service life of wood is 2-3 times lower than that of metal, in addition, such a fence needs periodic painting. It will take a lot of time and experience with carpentry equipment to build a fence.
3. Sectional fence with corrugated board - it is distinguished by its excellent appearance, ease of manufacture, affordable cost, completely hides the territory and protects against intrusion. This fence needs a good foundation, as the corrugated board itself is very light and does not tolerate wind loads.
4. Welded sectional fence - is the most popular and sought-after fencing option. For the manufacture of metal sections, steel pipes, corners, profiles, and fittings are used. These materials are easy to process, allow you to build sections of any size and shape. In addition, the fence is characterized by a high level of security, strength and reliability.
5. Sectional fences made of brick and concrete - are based on the manufacture of the base from these materials. The most expensive and heavy in execution, but at the same time - the most durable and durable.
In any case, whichever fence you choose, remember that a good sectional fence must be reliable, aesthetically pleasing, easy to maintain and durable.
Do-it-yourself sectional fence installation technology
The initial stage of work on a sectional fence involves determining the type of soil and creating drawings. Depending on the type of soil on the site, the optimal installation depth of the supporting components is determined. In places where the fence is installed, the site is leveled, vegetation, stones and debris are removed.
Select support posts in relation to the design of the fence. Most often, for a sectional fence, supports made of metal pipes are used. The diameter of the pipe depends on the load on the structure and is about 10-20 cm.
Support poles are installed in two ways:
- using concrete;
- without prefill.
Before starting installation work, treat the lower part of the racks with an anti-corrosion solution, cover with bitumen, paint or roofing material to protect against moisture.
Installation without pre-filling is carried out at any time of the year, regardless of the ambient temperature.
Pre-equip the wells for the installation of support pillars. The depth of the pillar is at least a third of its length. Pour sand at the bottom of the recess, compact it well. With a high location of groundwater, we recommend building a cushion of gravel or crushed stone.
Set the supports in relation to the level, prepare the concrete solution. To do this, combine the previously sifted sand with cement and water in a 2: 1 ratio. Position the supports in such a way as to create a perfectly straight line.
This is followed by the process of manufacturing individual sections. This will require a metal profile, pipe or corner. Cut the parts with a grinder, in relation to the size of each section. Using a welding machine, connect them together.
Pay attention to the verticality of the structure. In length, they should be the same as the diameter of the fence. To level each section, use a tape measure, building level, or strung pegs. Between the walls of the fence and the soil, pour the composition in the form of sand combined with crushed stone and carefully compact it. Thus, it will be possible to provide the supports with immobility and stability.
It is possible to create a tape monolithic foundation for a sectional fence with a polymer coating. Such a base can withstand high loads, ensures the reliability and durability of the future fence. Before starting work, make a markup using pegs and a rope. Next, make a recess, in relation to the size of the foundation, inside the trench, equip the holes for the supports. Install the formwork inside the trench, additionally reinforce the structure with reinforcement. After mounting and setting the supports, fill the structure with concrete mortar. For additional strengthening of the pillars, use spacers.
After the solution has dried, after at least 4-5 days, proceed with the installation of the mesh. Fixing the fence on the supporting pillars is carried out with special bolts with brackets. In addition, in the process of work, you will need to have:
- clamps;
- screwdriver;
- corners;
- welding machine;
- connecting clips.
Prepare the sections for installation, lay them out in the required direction, in relation to the drawings. Install the steel corner on the racks, with its help the section will be fixed. At the corners of each section, using a drill, drill holes for fasteners.
More simple in execution is the method of fastening the section using a welding machine. For this purpose, install a steel angle on the support and weld it to each section.
Do-it-yourself installation of a sectional fence with a welded mesh
We offer the option of making a fence from a chain-link mesh, this design is easy to install and has good performance characteristics. For work, you will need material in the form of:
- thick wire;
- reinforcing bars;
- rope;
- support pillars.
There are three mesh options for a sectional fence:
1. Plasticized version - a steel mesh with a polymer coating that protects against corrosion and other external irritants.
2. The most popular galvanized wire mesh - although expensive, the material has a long service life and good performance.
3. Non-galvanized chain-link mesh - the cheapest option, after installation it needs to be painted, otherwise it will rust in a month.
The fence made of plasticized mesh has an attractive appearance and good performance.
To make a fence, make sections on which the mesh is stretched. Initially, in relation to the design of the fence, markup is performed, supports and poles are installed. The frame part is made from a corner measuring 4x0.5 cm. Weld the corners into a rectangular structure. Monitor the quality of the seams, sand them and open the structure with an anti-corrosion solution.
Next, metal strips are welded onto the support structure, step back 18-20 cm along the edge of the post, install the section between two supports, paint the fence. A fence made of chain-link mesh has a lot of advantages, among which, first of all, the ease and speed of its manufacture.
Do-it-yourself sectional fence installation
In the process of working on a sectional fence, you will need:
- chain-link meshes;
- metal supports with a round and square section;
- metal corner for the frame;
- fasteners in the form of self-tapping screws;
- crushed stone;
- sand;
- cement.
Of the tools you will need:
- electric drill;
- screwdriver;
- grinders;
- welding machine.
Before starting the installation of a sectional fence, correctly mark the site and install the supports. Please note that the supports must be installed strictly vertically, the aesthetics and reliability of the resulting structure directly depend on the quality of their installation.
With a support length of not more than 140 cm, the depth of the pit under it will be up to half a meter. For its manufacture, it is convenient to use a manual or electric drill. Next, install a brick in the pit, and support the previously installed pole with spacers. Use a water level to check the evenness of the installation. Fill the hole in half, fill the rest of it with concrete. This ensures maximum stability of the supports.
It is possible to install fence crutches, a sledgehammer is used for their installation, and bolts are used for fixing. In order to extend the service life of the support pillars, they are topped and covered with hats or special overlays.
Measure the distance between the posts, subtract 30 cm by 15 cm on each side - this value will be the width of one section. Prepare the frame in relation to the dimensions of the section. Weld the seams between the corners on all sides. Take a roll of mesh and unfold it in relation to the frame part. Cut off the excess with scissors for metal. Upon receipt of the required size, fix the mesh in the frame; for this purpose, use a welding machine.
To fix the finished section on the support, install the holder. For their manufacture, a profile pipe is used, 4x2 cm in size. One support is fixed on the holders from above and below. Fix the sections at the corners to give them maximum durability.
Sectional fence video:
The fence has two main purposes: to form the boundaries of the site and to create a barrier against the entry of unwanted guests. The appearance of the building is in third place. But today, more and more often, this criterion moves into fourth place, displaced by the cost of the protective structure. Therefore, more and more often, the owners of suburban areas give preference to mesh fences. They have high reliability, but low price.
mesh fence
It is necessary to divide the mesh into two groups that differ from each other in the source material. These are metal meshes and plastic ones. The latter are rarely used for fencing sites, because they do not have sufficient strength. They are used for fencing flower beds, garden plantings and other structures.
In this regard, metal protective structures made of meshes are used everywhere. Because they have high technical and operational characteristics. Today, two types of nets are used for fencing: chain-link and welded.
They differ from each other in manufacturing technology. The first is made by the weaving method with the formation of cells, the second by the spot welding method, in which metal bars are joined.
It cannot be said that a welded mesh is better than a chain-link. Both have fairly high strength characteristics and almost the same advantages and disadvantages.
Advantages and disadvantages of welded mesh
The main advantage of fences made of welded mesh is low price with high technical characteristics. Next, we note:
- the ability to dismantle the mesh and use it elsewhere for the construction of fences or other needs;
- ease of installation;
- a huge variety of proposed sizes, which makes it possible to build fences of different heights;
- easily tolerates natural loads;
- transparency of the structure, allowing air and sunlight to pass through, which is an important factor for some areas.
With regards to the shortcomings, the last plus is regarded by many as a minus. Not everyone likes when their personal life is wide open. A transparent design contributes to this. The second negative is not quite a presentable appearance when compared with other protective structures, such as brick, stone or wood.
Not the most presentable
Varieties
The classification of welded mesh is based on the source material. There are three categories here:
- Manufactured from carbon steel without protective coatings. Weld it from metal rods with a diameter of 1.2-10 mm. Such products are subject to metal corrosion, therefore, over time, it becomes rusty. This type of metal mesh must be painted to reduce the wear process. Staining is carried out with an enviable frequency, which increases the cost of maintaining the protective structure.
- Galvanized. It is welded from galvanized wire, which practically does not rust under the influence of natural loads. It has a fairly long service life, there is no need to paint such a product. And yet it is not the best material.
- Not galvanized with a polymer coating. In fact, this is the first option that is covered with a polymer layer. The finished mesh is simply dipped into the polymer mass and then dried. To give the product a more presentable appearance, it is covered with paint using powder technology. This further increases the protective qualities.
- Galvanized with a polymer layer. This is the pinnacle of the quality of metal meshes, but also the pinnacle of the price component. Welded meshes of this type can be attributed to materials from the category with an unlimited service life, although manufacturers guarantee 65 years. At the same time, this type of material can easily withstand the temperature range from -55C to +65C and humidity not more than 97%.
Note that welded meshes are treated with zinc using two technologies. The first is the manufacture of a mesh product from galvanized wire, the second is made of carbon steel, and the finished mesh is subjected to galvanizing. The latter option is better, because in the first technology, welding heats up the zinc layer of two rods, which reduces the protective characteristics of the material. Often the zinc layer simply peels off from the body of the base metal.
In the construction market, the welded mesh is represented by two positions: rolled and in the form of layers. The second option is easier to install, because it is a finished product with its own dimensions, under which you just need to install support posts in increments equal to the width of the seam.
Galvanized fence with white polymer coating
Fence installation
Consider three installation options: layers or, as they are called, sectional structures and a roll.
Option number 1
First of all, you need to prepare all the required materials. Namely: a welded mesh, the layers of which are selected to match the height of the future protective structure, and support pillars, preferably from a profile pipe with a section of 50x50 mm and a wall thickness of 2 mm. Pipes must be closed with metal square plugs on both sides (they are welded by electric welding) and painted with powder paint to match the color of the entire protective structure. Today, plastic plugs are sold in different sizes, shapes and colors.
The next stage is the planning of the boundaries of the site. To do this, pipes or fittings (can be used) are clogged in the corners of the site, which are tied with twine. The installation step of the support posts must be determined during the design of the fence, it is on the basis of this indicator that the layers are selected, or rather, their width. The standard step is 2m.
Under the racks it is necessary to drill wells half a meter deep
The installation sites of the supports are determined, in which holes with a depth of 0.5 m are immediately drilled. For this, a drill with a diameter of 200 mm is used. Prepared shaped pipes are inserted into the pits and, with the help of a sledgehammer, they are hammered to a depth of 1 m. It turns out that half a meter of the pipe will be driven into the ground, half a meter will be concreted.
Pillars are hammered with a sledgehammer
Each pillar is set vertically using a building level and concreted with a mortar of the classical recipe: 1 part of cement, 2 parts of sand, 3 parts of crushed stone. All supports must be set to the same height.
Now we need to install mesh layers. For their fastening to the poles, special U-shaped clamps are used, connected on the reverse side with a mounting plate, which is supported by two nuts. The number of clamps is 4 for each post. In this case, the grid must be strictly set in height, taking into account the installation of each layer.
Fastening mesh layers with U-shaped clamps
There is another option for fastening work, which is a long bolt and a special shaped washer. To do this, the racks at the places of fastening of the layers are drilled through to the diameter of the fastening bolt used. The layers are installed, bolts with washers are inserted into the holes, which are tightened with nuts on the reverse side. It is recommended to place a rubber or plastic gasket under the washer.
Mesh fastening with a bolt and a shaped nut
And another type of fastening is a special clamp that works for tightening. Choose it according to the size of the profile pipe used for the support posts. They compress both the pipe and the mesh laid on it with a clamp. Tightening is done with a bolted connection. The photo below shows such a collar.
Clamp for fastening the welded mesh to the support posts
We offer you to watch a video on how to properly mount a welded mesh fence.
Attention! You can not drive the pillars into the ground. They are simply installed in a prepared hole 70-80 cm deep and poured with concrete. The main thing in this process is to install supports under the racks so that they support the supports in a vertical position during the drying of the concrete solution.
Option number 2
The installation sequence of this type of fence is different. And the mounting method is different.
You will need pipe-racks, in which holes are made every 40-50 cm, where special rivets are driven. The latter have an internal thread for fasteners. The rivets are driven into the holes with an interference fit so that they do not rotate at the installation site.
Now the two posts are laid on the ground parallel to each other. A welded mesh is laid on them, which is attached to the pipes with a bolt and a special washer.
Fastening to racks with special fasteners
It turns out a finished section, which is installed in prepared pits and concreted as a separate element of the barrier structure.
Option number 3
Consider how the roll-type mesh material is attached.
- The edge of the product is tied to the first post with a knitting wire.
- The roll unwinds to the second rack.
- Stretches to the max.
- It is tied to the rack with wire in several places.
And so to the end of the fence. To prevent the mesh from sagging, you can pass a thick wire or steel rods along the upper and lower edges. This is how work is done to install a grid made of thin steel bars. The structure with greater strength is attached to the racks in other ways.
If the mesh is welded from rods of not the largest diameter, then you can try to attach the finished product to the pillars with metal roofing screws. Not the best option, because the head of the self-tapping screw is of small diameter, so a tight fit to the surface of the profile pipe is not guaranteed. There is a high probability that the mesh will pop out from under the fasteners in the process of wind pressure or ground displacement. You can try to put a wide washer under the screw, but this is not the best solution. Although both methods are often used when installing grids made of small wire.
Fastening to metal risers with roofing screws
It is optimal to make a rectangular washer into which two self-tapping screws will be screwed at once. The mesh rod located on the post will remain between the two fasteners, and this will not allow it to move along the post. And the washer will keep it from moving in the horizontal plane.
Roofing screw for fastening a welded structure
You can use roofing screws with profile washers, as in the photo above. They simply attract the mesh to the rack, so the washer must be selected according to the dimensions of the profile pipe so that the latter is inside the washer.
The fence assembly technology is almost the same in all the situations described above. But there are many ways to attach a mesh product to racks. Therefore, one is chosen that is easier in the process of doing the work with one's own hands.
Photo gallery
Painted fence assembled from welded mesh on U-shaped clamps
Protective structure made of welded mesh
Fence assembled according to the type of 3D welded mesh construction