Various swings. DIY garden swing: a selection of design ideas and ways to implement them

A shady garden in a garden or summer cottage will be a great place for a family holiday, especially if you make a little effort and make it comfortable with the help of various accessories and small structures, for example, canopies, gazebos, benches, etc. Make it and place it on the site Garden swing made of wood with your own hands: photos and drawings, dimensions and basic parameters for construction can be found in this article.

Features of creating a wooden swing for a summer residence: characteristics and types of structures

To create a garden swing, three main materials are most often used. This list includes wood, plastic and metal. Undoubtedly, each of these materials has its own advantages and disadvantages. But when it comes to drawings of a garden swing with your own hands, you will not find a more practical and convenient raw material than wood.

Wooden swings have only one drawback, which concerns the operation of any products made of wood. Similar designs Without the use of appropriate protective measures, they can suffer greatly from the influence of negative environmental factors.

These factors include the impact of:

• rain;
• snow;
• direct sunlight;
• fungi and mold;
• insects;
• sudden temperature changes;
• decay processes.

Advantages of making a wooden garden swing with your own hands

Wood has excellent technical and performance characteristics. Thanks to the properties of this material, you can create a truly comfortable and beautiful design.

Features of a DIY garden swing made of wood:

• environmental friendliness. Since wood is a natural material natural origin, products made from it are completely safe for human health;
• external aesthetics. The structures can fit into any landscape and garden design, since the main part of the environment consists of natural materials(stone, wood) and vegetation. Compared with metal products, wooden structures benefit significantly from an aesthetic point of view and can support the exterior of any country house;

• safety. Due to its softness, wood is convenient to work with and use, and can reduce the number of injuries. This advantage is most beneficial if you intend to design a children's swing;
• simple installation system. Anyone with basic skills in construction and handling wood can start building a swing;

• versatility. This type of material lends itself quite easily to various types of processing (grinding, cutting, cutting). Thanks to this, any of the DIY garden swings made of wood, the photo of which you like the most, can be made by you yourself without involving specialists in this process. Wood allows the construction of single-seat structures or swings with large capacity, made in the form of sofas.

Do-it-yourself garden swing made of wood: photos and drawings, sizes and modifications

If you have decided to start creating a swing on your summer cottage yourself, first of all you should decide on the type of structure you want to install and determine appropriate place to place it. To facilitate and speed up the design and preparation stage, use a photo of a do-it-yourself wooden garden swing, of which there are many drawings on the Internet.

Varieties of DIY garden swings made of wood

The classification of garden swings is quite extensive. In this case, the main types of structures are presented:

• family - have high capacity. The design is based on a long bench, which acts as a large seat that can simultaneously accommodate up to 5 people. In most cases, swings of this type are equipped with their own canopy, protecting from sunlight and bad weather;

• children's designs can have a significant number of modifications. Most often, the main components of such a product are supports, a small seat and fasteners. It is important to ensure a full level of safety for the child. For these purposes, the design must include protective elements that will prevent the baby from falling. Such elements include a comfortable backrest, handrails on the sides, a partition located in front, seat belts that secure the child inside the seat;

• portable – products with compact dimensions and light weight. These characteristics allow you not only to move the swing around the site, but also to put it in a car for transportation to another place during your vacation. As a rule, such products are secured to a tree branch or to a pre-made support.

Choosing a place to place a children's swing with your own hands made of wood

Any type of construction that is carried out on the territory of a suburban land plot, begins with the design phase and selection of an appropriate location.

Whenever possible, you should select a plot of land with flat surface. It is advisable that this area be sheltered from the sun and precipitation. The ideal place to create a swing is an area under a tree where thick shadow falls. Installation on a porch protected by a canopy is allowed.

All these conditions directly affect the level of operating comfort, since sitting on a swing seat that is hot under the sun is unpleasant and uncomfortable. And unimpeded exposure to rain can damage the structure.

It is also worth taking into account the fact that as the sun moves across the sky, the shadow cast by a tree or other objects will move. For installation, you should select a place where there will be shade at midday. During this period of the day the sun has its strongest and most aggressive influence.

Drawings and photos of a DIY garden swing made of wood for a summer residence

If we talk about universal designs then swing hanging type, installed on A-shaped supports, will become a real recreational object for the whole family. Moreover, they can be installed both in large summer cottages and in small gardens near the house. And the process itself is not expensive in terms of time and effort.

The list of required tools for work should include:

• tape measure and pencil (the tape measure can be replaced with a measuring tape);
• jigsaw mechanical type or electric;
• circular saw;
• hacksaw;
• square for measuring angles (combined type);
• rafter pins;

• test square;
• sawhorses;
• thicknesser and planer;
• hammer, screwdriver, clamps, wrenches;
• chisel (25 mm);
• electric drill with a set of drills (10, 8 and 4.5 mm);
• sanding block.

Construction of a wooden swing for a summer house with your own hands: drawings and selection of materials

On initial stage materials are being prepared to create a garden swing with your own hands, the photo of which you liked the most. Based on the drawings, you can easily understand how many blanks will be required to assemble the structure and what dimensions they should have.

Dimensional table for creating blanks:

Detail in design	Dimensions of the transverse part of the workpiece, cm	Final length, cm	Required number of blanks, pcs.
Frame part of the structure
Spacer (upper)	4.5x14	23	2
Spacer (lower)	4.5x14	96	2
Leg	4.5x9	198,7	4
Rigel	4.5x14	210	1
Seat parts
Rear pillar	3.5x7	60	2
Bar (support)	3.5x7	95,5	2
Bar (for seat)	3.5x7	120	2
Armrest	3.5x7	60	2
Back strap	2.5x7	130	2
Armrest support	3.5x7	27,5	2
Seat bar	2.5x7	128,4	8
Upper bar	2.5x9	130	1

In addition, to connect the above blanks together into a single structure, fasteners with different parameters will be required.

Additional materials for creating a family or children's hanging wooden swing

The final dimensions of the structure are: 2.1 m (width), 1.235 m (depth) and 1.9 m (height). It is recommended to use impregnated pine as a raw material.

Dimensional table of fasteners:

In addition to fasteners, you will need a number additional materials: pair of wooden spacers for corner zone(length 38 cm), sandpaper with a grit level of 120, hooks equipped with a fuse (6 pcs., 5 mm), chain 4.4 m long (link thickness 2 cm).

Drawings of a garden swing: how to make a family structure with your own hands

To place the swing, it is recommended to choose back Houses. Even if your site is fenced off from a noisy street and neighbors, this area will still be the most comfortable and quiet. The backyard in most cases is set up for relaxation, and you can safely use it to install a family or children's outdoor wooden swing for the garden.

Marking the supporting part of the product

To make the support, you will need to cut the cross beam to the specified size using circular saw. At a distance of 15 cm from each end, marks are made and a straight line is drawn. It should go along all the faces on the beam. This line will be considered as the outer edge for the A-shape support.

Markings for inclined cuts should be applied to the end part of the legs. To do this, the square is fastened with rafter pins. One of the pins is installed on the larger leg (at a distance of 316 mm from the corner), and the other on the smaller leg (at a distance of 97 mm from the corner). The leg is placed on the edge and marked with the positions of the square. You should have a bevel for making the bottom cut.

After this, the positions of the ruler of the square are marked on the edge of the legs. To do this, you need to move the square along the leg to align it with the previous position of the ruler. Having outlined the length of the ruler, you can move the square further.

The last marking line is intended for cross-cutting the beam. These positions are marked using straight lines leading to each of the edges of the leg. To make a pattern, you need to saw off the material on the side that is not processed.

Cutting the supporting part of the structure

To saw off material using a hacksaw, you must first place it on the edge and clamp it in the saw sawhorses. The cutting is carried out strictly according to the markings. Remember to control the sides. This is especially true for the upper cut area. Sometimes it becomes necessary to straighten the bevel. To do this, it is enough to process the end part of the cut with a plane.

To form the second leg, you need to put the first one next to it, joint to joint. After this, all marks on the bevels and length are transferred to the second leg and sawed off according to the markings.

Then both legs are placed on the edge so that the end parts of the vertices are located on opposite sides of the cross beam. The lower part of the legs is moved to the sides until a distance of 1.2 m is formed. Top part of these parts must be adjacent to the crossbar. To check the bevels, use a ruler, applying it to the ends. Make adjustments if necessary.

A distance of 50 cm is measured from the base of the legs and applied bottom beam OK. Next, the lines of the legs, as well as the upper and lower parts of the bar, are transferred to the corresponding parts. After this, the top block is placed on the legs. This must be done so that it is located 15 cm lower than the cross beam lies, and is parallel to the first bar. The marking is carried out in exactly the same way as in the previous version.

After this, the bars are removed, and the markings are aligned on the surface. At given points, these elements need to be cut to the required length.

DIY garden swing drawings: assembly of the support part

The next stage of construction is checking the fit. The markings are transferred using a square to inner part legs

The template is set at the 22 mm mark and markings are made between perpendicularly located lines on the inside of each of the legs.

• a nail with a convex head (25x65 mm) is driven in from the outside of the leg;
• adjusting joints and driving nails into the frame;
• Forming a hole with a drill whose diameter is 8 mm. The hole should reach the central part of the end of each block;
• forming an installation hole with a drill whose diameter is 4.5 mm. This needs to be done as deep as possible into the end part of the bars;

• tightening parts through the installation hole using screws with a square head, equipped with washers 8x100 mm. You need to do this procedure with all the bars;
• placing the cross beam in the appropriate place at the top of the frame;
• alignment of frame edges with perpendicular markings on the cross beam;
• forming a hole with a diameter of 10 mm in the beam and in both legs;
• fixing parts using a bolt with a semicircular head (125x10 mm) and a nut;
• checking the angles between the beam and the leg;

formation through holes in a leg with a diameter of 4.5 mm at a level of 30 mm from the bottom of the beam. Fixing parts with screws (65 mm). Similar actions are performed in the upper part of the leg. Only in this case, other screws (38 mm) are used for fastening.

Next you need to connect the top bar and the crossbar. The spacer is fixed with a through screw, the size of which is 65 mm. The upper part of this element is fixed to the bottom edge of the beam at the end with a 38 mm screw into a pre-made hole (4.5 mm).

Making a seat for a garden swing with your own hands from wood

The technology for creating a seat is carried out in stages based on an L-shaped frame made of boards (40-50 mm).

Step-by-step instructions for making a seat:

• From the boards you should form 3 frame parts for the bench. They should be L-shaped. Fixation is carried out with self-tapping screws. To adjust the frame part to the curve of the spine, use carpentry tools. Thanks to this, you can achieve a comfortable posture for your back while riding;
• frame elements should be placed along the length of the bench with the same spacing. Use a thin board to hold them together. The resulting design will become the basis for creating a bench. Part c vertical type placement will be a backrest, horizontal – a seat;

• the remaining seating area is filled with boards. Pre-drill holes in them to facilitate the process of screwing in screws and prevent cracks from occurring. Make sure that the boards are located at the same distance and have equal length;
• sand the surface using a grinding tool. Thanks to this, you can eliminate unevenness and burrs on the wood;
• secure the armrests.

Photo of a wooden swing for a summer house with your own hands and the hanging process

In order to hang the seat in its side (approximately in the middle), screws equipped with rings should be installed. Two more rings are attached to the bottom of the crossbar. These elements will be used to connect the support and the swing using hangers. In this case, chains are used.

The connecting elements between the main parts will be carabiners. The length of the hangers can be adjusted as desired. Optimal height to place the bench is 30 cm above the ground.

The final stage of construction of the structure

The next stage of construction will be the final one. In order to protect the finished structure, the swing must be treated with a varnish. It will provide a smooth surface and preserve natural beauty wood and will extend the service life of the product.

Depending on personal wishes, the swing can be painted in any of the colors you like or a small canopy can be installed. Show a little imagination at this stage, and you will be able to create a unique product.

For greater comfort, you can place pillows or a small mattress on the bench to reduce the rigidity of the landing. Its size must match the size of the seat. Anyone who is familiar with the technology of making upholstery for furniture can be advised to apply these skills when creating a swing. Make soft not only the seat, but also the back, as well as the armrests, if they are present in your design. Do not forget that upholstery is only possible if the product is located under a roof or canopy.

Photos of children's swings made of wood with your own hands and how to create them

Children's design options are much easier to implement, since the requirements for weight loads are much lower. On the other hand, safety standards in this case must be strictly followed, since children are extremely mobile and can swing in various ways.

Making a kindergarten swing with your own hands: video and various manufacturing methods

The most popular designs for the garden are hanging swings. There are several simple methods creating products for children.

According to the first technology, a seat made of wood in the form of a wide and thick board is used. There are holes made in it (a pair on each side) through which the rope is threaded. This is done in such a way that the suspension is pulled into one hole and comes out of another located nearby.

The second technology involves creating a swing based on a frame made of wood. This element is tied to a crossbar or tree branch with ropes, and the free space is filled with small but durable planks.

Half of a rounded log is used as a seat for the structure created by the third method. It should be cut lengthwise. This seat option is considered very durable, but requires careful processing. The surface of the log must be well sanded and polished to get rid of knots and burrs.

The fourth option for creating a structure involves using a board as a seat and through metal fasteners. An assortment of modern stores offers fixing fasteners various forms, so you will have quite a large selection.

In terms of design, children's swings do not impose serious restrictions. To create them, you can use any available materials. For example, a rope can be replaced with a chain, wooden board, used as a seat, can be replaced with a chair by first removing its legs. Be sure to use bright colors, as children really like the abundance of colors.

How can you diversify your holiday at the dacha, make it easy, fun and enjoyable? There are many ways, and one of them is installing a swing in the garden or on a specially designed playground. Whether it is a separate structure or a device in a play complex makes no difference, the main thing is that it brings a lot of joy and positivity. To save money and at the same time please your loved ones, you can build a garden swing with your own hands: they will compare favorably with purchased models due to the originality of the idea and exclusive finish.

Before you start creating a sketch, you need to answer two questions: where will the structure be installed and who is it intended for? Depending on the answers, they make an estimate, prepare a drawing of a garden swing, and select tools and materials.

Swings located outdoors are often equipped with a canopy, which serves as protection from the sun (rain) and at the same time is an interesting decor.

One of the simplest structures is a swing on A-shaped supports with a seat-bar

There are a lot of solutions, so for convenience, all products can be divided into three categories:

• For the whole family. This is a large structure, often in the form of a bench with a high back, which can accommodate several people. The product is suspended from a durable U-shaped frame using chains. A small canopy on the cross beam allows you to use the swing in almost any weather.
• Children's. Quite a diverse group: here are frameless products consisting only of a suspension and a seat, and strong structures with a seat in the form of an armchair, and large structures boat type. Frame models are safer. Any type of swing for the youngest children should be equipped with safety belts.
• Portable. Mobile swings of this type are usually hung indoors: in the house, on the veranda, in the gazebo. They can be removed at any moment and installed in another place.

Each of the listed types has its own advantages and can be used in the country for relaxation and entertainment.

Bench swing: step-by-step instructions

Swinging alone is certainly boring, so we present an option for a cheerful group - a swing in the form of a wide bench that can accommodate several people.

The proposed parameters can be changed - for example, making the seat wider or narrower, the height of the backrest a little more or less. The main thing is that you can sit comfortably and relax. This swing is designed for a garden or recreation area; both children and adults can use it.

Taking the bench seat as a basis, you can invent various options design of the swing in general

The sofa swing is suitable both for relaxing with a book and for a cheerful conversation with friends

A country swing can be hung from a large horizontal branch, but it is better to install two posts with a cross beam specifically for them.

Preparation of materials and tools

If construction has recently been carried out at the dacha, there will be no questions in finding materials - after all, everything you need is already at hand. Wood is best suited for manufacturing - a soft and malleable material, but strong enough to support the weight of several people. Birch, spruce or pine are perfect both in terms of characteristics and cost.

Boards – suitable and inexpensive material for building a swing

So, the list of materials:

• pine boards (100 mm x 25 mm) 2500 mm long – 15 pieces;
• board (150 mm x 50 mm) 2500 mm – 1 piece;
• self-tapping screws (80 x 4.5) – 30-40 pieces;
• self-tapping screws (51x3.5) – 180-200 pieces;
• carbines – 6 pieces;
• welded chain (5 mm) – along the height of the swing;
• galvanized screws with rings – 4 pieces (pair 12x100 and pair 12x80).

Metal parts and screws can match the color of wood or, conversely, be contrasting (for example, black).

To build a garden swing made of wood, traditional tools for processing this material are suitable: a drill with various drill bits, a circular saw, hammer, jigsaw or hacksaw, plane. A square, tape measure and pencil are useful for measuring workpieces.

Procedure

Pieces of one and a half meters long should be sawn off from the boards. The corners of the workpieces must be straight.

Thanks to precise markings, the swing will be smooth and beautiful

The thickness of the finished planks should not be less than 20 mm. The load on the back will be much less, so a thickness of 12-13 mm is sufficient. The approximate number of slats for the seat (500 mm) is 17 pieces, for the back (450 mm) - 15 pieces.

To protect the wood from cracking, holes for self-tapping screws are drilled with a drill, choosing a thin drill bit. The depth of the hole for the self-tapping screw is 2-2.5 mm.

Holes for self-tapping screws will help save wood

To make the seat and back comfortable, it is better to make the parts of the base on which the slats are attached not straight, but shaped. To make them, you will need the thickest board (150 mm x 50 mm). Thus, you will get six shaped parts for the frame.

The contours of the future part, applied to the workpiece with a pencil or marker, will help to cut it out accurately

Having chosen the required angle of connection between the back and seat, you should combine the parts into the frame and fix the slats one by one, making equal intervals between them. First, the ends of the parts are attached, then the middle.

By nailing the central strip first, it is easier to align the remaining elements

The armrests are made from two bars of arbitrary width, then fixed with one end on the seat, and the other on the back frame.

The finished swing must be coated with varnish or paint.

The best place to attach the ring screw is at the bottom of the armrest pillar.

To prevent the nuts from going completely into the wood, washers must be used. Similar rings are screwed to the top beam on which the swing will hang. The chain is attached to the rings using carabiners - the place for relaxation and entertainment is ready!

Simple swing with different seating options

Simple and universal option – side racks for swings that can be hung on different kinds seats. Let us dwell in more detail on the installation of the holding structure.

Part of the chain can be replaced wooden blocks cylindrical

The material and tools for construction are the same as in the previous description.

One of the seat options is a sofa designed for 2-3 people

Externally, the design looks like this: two posts in the shape of the letter “A”, connected by an upper crossbar. To begin with, it is important to calculate the angle of connection of vertically standing parts. The wider the intended seat, the wider the racks should be spaced. The beams (or pillars) are fastened at the top with bolts for reliability.

Support structure posts

To prevent the vertical elements from diverging, they are fixed with crossbars at a height of 1/3 from the ground. When installed, the crossbars will be parallel to each other. Best mounts for them - corners mounted on self-tapping screws.

Fixing load-bearing beam using additional elements

Usually one pair of crossbars is enough for the screed, but sometimes a second one is made - in the upper part of the structure. Together with them, the attachment point of the upper crossbar is reinforced - metal or wooden overlays in the form of a trapezoid are mounted on the inside.

Cross bars increase the stability of the supporting structure

A supporting transverse beam is attached to the finished side posts, and then the structure is installed in the ground. To do this, dig two pairs of holes (at least 70-80 cm deep - for greater stability), at the bottom of which cushions of crushed stone (20 cm) are placed, posts are inserted and filled with concrete. To check the level horizontal arrangement The upper beam is used as a building level.

For the youngest summer residents, a chair with insurance is suitable

The upper crossbar can be equipped with fastenings installed at different widths, resulting in a structure on which you can hang various swings - from simple rope swings to a family sofa.

Material on how to do this may also be useful hanging chair with your own hands:

When installing a children's swing, you should remember that safety comes first, so all parts should be carefully sanded sandpaper. For the same reason wooden elements must be “without a hitch” - defective wood is not suitable for load-bearing structures. Sharp corners must be smoothed with a file.

For fast processing wood using a sander

It is also worth taking care of the swing itself. Treatment with impregnation, finishing with paint or varnish will prolong the life of the structure, and galvanized fasteners will avoid destruction of the wood from the inside.

Photo gallery of original ideas

Since you will be making the swing yourself, you can get creative and give it some originality. Of course, the decoration of the product is purely individual solution, but some ideas can be borrowed from ready-made designs.

To diversify your holiday at the dacha, in the shade garden trees There are comfortable swings where you can relax and recharge your batteries. We want to tell you how to make a garden swing with your own hands, because it is doubly pleasant when using the product of your own labor also brings joy.

Preparing to build a swing

Choosing a location on the site

A swing is not just a bench or a stump with a seat; this type will be a stationary and relatively capital object, so you need to choose an appropriate place for it.

This means that we need to take into account all the nuances of this structure, namely:

• Mobility. Part of the structure is a moving unit that performs damped oscillatory movements under the influence of gravity like a pendulum. Therefore, it is necessary to calculate the maximum stroke of this pendulum in each direction and take care that there are no obstacles within these limits: trees, stumps, bushes or pieces of garden furniture;
• Stationarity. To ensure the movement of one part of the structure, it is necessary to securely fasten its other part - the support frame. To do this, we will have to bury the racks in the ground and concrete them to a depth of 60 - 70 cm;
• Site quality. You've probably noticed constant puddles and mud under your yards or homemade swing, since the ground under the seat is constantly worn down by feet during braking, and a depression is formed there where water and dirt accumulate. Therefore, in order to use the attraction comfortably, you should immediately rid yourself of this misunderstanding - do concrete screed or lay tiles, rubber, or at least make a backfill of gravel.

Important!
For normal and long work structure, it must be installed as level as possible, that is, when the seat hangs freely in the lower position, the chain or cable must be perpendicular to the top crossbar.
To control this parameter, it is most convenient to use a plumb line.

It is also important to remember that it is very dangerous to be in the vibration zone of the amusement ride bench, as you can receive a strong blow and seriously injure part of the body. Therefore, this area should either be restricted from access or ensure that no people or animals enter it while the swing is in operation.

Another aspect that is often forgotten is that the attraction will most likely be permanent place your children's games, so it is better to think in advance about how to limit the zenith, or the highest point to which the pendulum can be swung. Otherwise, children, unwisely, can swing it up to a full revolution around the crossbar, wrapping the chains around it and falling upside down.

Important!
From all that has been said, we can draw the following summary: the place for it should be spacious, level, free from obstacles and be in line of sight relative to the house for control and safety.

Choice of material and type of construction

Several factors will depend on the choice of design type and materials:

1. Reliability;
2. Durability;
3. Price;
4. Safety;
5. Relevance from a design perspective.

As a rule, for self-made They use two types of materials: wood and metal, as well as their combinations. Concrete works and we will not consider work on landscaping the site for now.

Metal models, at first glance, are more reliable and durable, and all other things being equal, this is so. However, metal is also susceptible to corrosion, and if not processed correctly given dignity easily lost.

On the other hand, properly selected and treated wood with timely care demonstrates quite acceptable reliability indicators comparable to metal.

If we consider these materials from the point of view of safety and artistic value, then here undisputed leader there will be wood (unless, of course, your garden is made in the style of a Gothic cemetery and is not replete with forged trellises and fences).

It is also important that the processing wooden parts much simpler and does not require tools such as a grinder, electric and gas welding, metal drill, etc.

If we talk about cost, then a really beautiful forged frame will cost much more than high-quality wood, and the use of banal pipes or corners will result in a “freak” that will spoil the beauty and atmosphere of a country estate.

Important!
In terms of feasibility, we consider the most suitable wooden structure, reinforced metal parts in some places.

Making a swing

Before you start work, you need to draw up a work plan and drawing. You can easily find drawings of a garden swing with your own hands on our website, or you can make them yourself.

1. We take 4 three-meter beams 100x100 mm and make two L-shaped structures connected at an angle of 50 - 55 degrees using furniture bolts;

1. We retreat 60 cm from the lower end of the support and divide the remaining part by three. At the level of the border of the first and second thirds we install puffs from edged boards, two for each leg. We fasten with bolts.

1. Now we connect the resulting frames with a 100x100 mm crossbar made of oak timber. We select the length of the crossbar so that the width of the frame is 50 cm greater than the width of the seat.

1. We dig in the legs of the structure to a depth of 70 cm, where 10 cm will be a backfill of crushed stone and sand. Next, we concrete the pits with a solution of cement, sand and crushed stone 1:3:5. We set the structure plumb so that the thread is perpendicular to the crossbar;

Important!
We treat the part of the support beam that will be immersed in concrete with bitumen mastic.

Conclusion

A good wooden swing in the country is a great place to relax and a joy for children of any age. We told you how to make them yourself, the nuances are in the video in this article.

Often people, arranging country houses or cottages, install a garden swing. These structures can be made of wood, they car tires, as well as other available materials. In order to truly get robust construction, which will last for decades, you need to use the drawings on the basis of which the metal swing is made.

To create a garden swing made of metal, various materials can be used. Consequently, many design solutions can be found. There are a huge number of photographs on the Internet country swing for the garden, which are made by hand. So, to create a garden swing, the following materials are used: metal corners, square profiles, steel I-beams, profile pipes round shape, brands (made of aluminum).

Photo of metal garden swings: free-standing and stationary

We draw your attention to the fact that based on these elements you can create benches, as well as small children's rocking chairs.

Before you start creating drawings of a swing in the garden, you need to decide what type of structure will be. So, you can study several ready-made schemes, which are offered by modern manufacturers.

We make a swing for the garden from metal with our own hands

If you are thinking about how to make a garden swing with your own hands for a child, you can take factory-made options as an example. Such products will have the correct shape and calculated design. Specialists offer many design solutions. It’s enough just to make something similar with your own hands from scrap materials.

Classification of products from the manufacturer

So, let's talk about free-standing garden swings. This type of swing is installed in any place that the owner considers most suitable. There is no need to install additional supports or hangers. A swing of this kind can be made not only of metal, but also of wood.

Freestanding swing design

Sofa swings can be used not only by children but also by adults. You can all sit on the swing together. They are comfortable and safe, have a soft back. During rain and winter, the swing can be removed indoors. The structure has a block structure. The product is also made of wood or metal.

“Sofa rocker” for the cottage

Making a garden swing with reclining backrest, and mosquito net. They are intended mainly for children. This swing can be equipped with other accessories to create additional comfort.

Photo: Forged metal swing with roof

Forged garden swings are also created, which have a number of advantages. So, they are installed mainly on country houses. Please note that to work with metal you must have skills in working with a welding machine. Otherwise, you can contact specialists. So, the swing will be strong and durable. You can make an original product that will become an interesting decorative addition to the exterior of the house and its landscape. Forged swings are considered the most expensive type of product. However, the price is justified by the decorative parameters.

Advice! Forged swings for the garden can be used on the site to maintain the overall design of the building, as well as the surrounding area, parts of the exterior, which are also made in the form of forging (lanterns, window grilles, balconies, benches, and so on).

Park swing with roof

Metal swings have a number of advantages compared to products made from other materials. That is why on the Internet you can find many photographs and projects of metal garden swings. Such products have many advantages. Thus, their service life is considered the main advantage. The metal is not susceptible to the harmful effects of factors such as rotting. The swing cannot break when drying out.

Practical metal swing. Rain, precipitation, solar energy do not affect the performance of the product in any way. The swing is reliable due to the fact that the metal itself has a high degree of strength. When purchased, metal is not as expensive as other materials. Moreover, wood, which costs more, will not be as durable as metal. There are many types of modifications available for sale. In the store you will find a variety of swing options that will suit your preferences.

Despite the fact that the product has visual appeal, it itself will not fit harmoniously into the landscape of the dacha site, for example, like a wooden swing. Will need additional stylistic design plot. You should definitely add something similar from forging.

We draw your attention to the fact that you can make a metal structure yourself, but for this you need to have skills in working with a welding machine. In addition, you need to have your own welding machine or rent one.

Concerning positive qualities material, then it is worth noting the strength and hardness of the metal. Its strong structure at the same time can be considered a disadvantage. On the other hand, at the dacha it is strength that is needed so that the product lasts as long as possible. At the same time, metal can cause injury. Therefore, wooden swings seem preferable in this regard. Not only are metal products constantly susceptible to corrosion. Over time, rust can destroy the swing, reducing its durability. Metal requires mandatory care. So, the product is coated with varnish, paints and other anti-corrosion agents. , can have different type frame. Based on this feature, the following design options are distinguished: prefabricated, welded.

Homemade construction with polycarbonate roof

To create a welded swing you will definitely need a welding machine, as well as other equipment. The result is a strong and rigid supporting structure that will work for several decades without risk to health.

If you do not have the skills to operate a welding machine, then you can choose prefabricated structures. The basic principle of assembly is to tighten the bolts. It is obvious that every person can cope with such work.

We draw your attention to the fact that over time, in do-it-yourself metal swings, at the joints, under the influence of weight and other loads, the fastenings become loose over time. So, there is a backlash. It can cause the swing to collapse, and a person can get injured. To prevent this from happening, the connections should be secured with locknuts and groovers. Do not forget that you need to regularly tighten the connection points with a wrench.

A-shaped frame base.

The best option is to make a country swing with your own hands according to the drawings. If you look at different diagrams, you will understand that the configuration of the supports will be different.

So, the frame base is an A-shaped support. The structure consists of two parts - two crossbars, which are secured to each other in the upper part. There are supports that do not have a jumper. There will be an L-shape.

Another support is with a crossbar, U-shaped. It is noteworthy that it is very simple to create such a structure, but its strength will not be the best. Operation of the structure will be safe when the supports are installed in deep well in the ground, with concreting. In addition, metal swings are divided into two groups:

• stationary - the support of the garden swing is concreted;
• portable structure - fixed on anchors or on bent reinforcement, which is installed in the soil.

The most common are considered hanging swing to the dacha. They are practical, convenient and comfortable to use. You can create a canopy over the swing that will protect it from the influence of sunlight. So, the seat will not heat up, and riding will become even more comfortable.

In order to create a canopy for a children's swing, you can use tarpaulin, textiles, wood with soft tiles in the form of a roof or polycarbonate. However, cellular polycarbonate is considered the best option. Sheets of this material have a transparent structure. It will never be dark or very bright under the canopy.

What tools are needed to create a swing?

Before you start building a children's swing with your own hands, you should make sure that you have a certain set of tools: an angle grinder, a construction tape measure, a level, an electronic drill, a welding machine, a screwdriver, wrenches, and self-tapping screws for polycarbonate sheets. For the work you need to buy materials such as metal profile corners or pipes, boards for sitting, washers for bolts, nuts, stainless steel fasteners, anchors, fittings, carabiners, chains. In addition, you will need several sheets of polycarbonate, protective elements for the frame, anti-corrosion and anti-fungal agents for metal and wood, respectively.

So, initially it is better to create a drawing according to which the work will be carried out. The place where the metal swing will be installed is immediately selected. We determine the dimensions of the future structure. The best bench size option is 1.5 meters. This space is enough for two people to sit on the swing at once.

Advice! You should definitely leave a gap between the rack structure and the side part. Its minimum size is 30 centimeters.

According to the drawing of a garden swing, the following parts can be distinguished: a support frame with a rectangular shape at the base, a side frame, which is made of a pair of pipes connected by welding, a horizontal crossbar for hanging the bench.

Drawing with photo

Drawing with dimensions

With this information you can make the assembly process easier. The design of a country swing of this type receives the required rigidity. If you choose the right base width, you can create a very stable swing. It is better to take the rule as a basis for your work: the larger the angle that is at the top of the triangle between the base and the side parts, the greater the stability of the swing. General dimensional parameters are calculated individually. You can adjust the indicators regarding the roof and benches to fit them. Experts in mandatory It is recommended to create drawings that indicate all dimensions of the structure. This will make it convenient to work with materials. And then there will be no mistakes, the work will take less time.

Approximate Dimensions

As a rule, work on assembling the frame begins with the side parts. To do this, markings are applied to the pipes on the base. The material is cut with a grinder. Before assembling the structure, it is necessary to re-measure all parameters. Next, the elements are connected in pairs using welding. The result should be two identical L-shaped parts.

The sharp end, which is located at the top of each part, is cut off at the same level. This procedure is performed in order to create a small platform for support on which the horizontal crossbar is fixed.

Advice! To work, you must use a pre-prepared template.

The short side is the width of the support frame. Its size must correspond to the distance that remains between the paired pipes of the side parts of the structure. By using welding machine the sidewalls are connected to the supporting frame rectangular shape. Then the horizontal crossbar is connected.

Chain seat design

When assembling the frame, be sure to strictly follow the rules of geometry: the side posts are vertical. A horizontal beam is used to hang the bench. The beam runs parallel to the base. In order to control the evenness of the base, you need to use a building level.

An important point is the assembly of the bench. This work is especially important if you are making a country swing from metal with your own hands for children. The basis of the seat is a frame base. It is made from angle steel. In order for the bench to have a comfortable backrest, you need to position it relative to the seat at an angle of 120 degrees.

Single seats

It doesn’t matter who you are making a swing for in the garden, in any case the seat and back should be smooth. For this purpose, boards or bars carefully processed with sandpaper are suitable. Boards are cut the right size and are attached to the frame through pre-created holes using bolts so that the heads are “recessed” into the material. Before finally assembling all structural elements, it is necessary to treat the parts with an antiseptic and varnish. Metal constructions treated with primer or paint.

Making a canopy for a dacha structure

It is noteworthy that the canopy for the country house metal swing it is not necessary to create. However, if you are creating a swing for children, then you should take care that they do not get wet or overheat in the sun. As a rule, a rectangular structure is made that stands on a rectangular frame. A polycarbonate sheet is laid on top. The roof is angled so that precipitation flows down.

Once all work is completed, final processing should begin. The surfaces of the swing are covered with a primer, then with paint of any color. Once the frame is dry, you need to attach polycarbonate to it. Special screws for polycarbonate are used.

Advice! It is better to cover the ends of the sheets with a special profile. It will protect the material from insects, dust, and preserve the durability of the entire structure.

The finished metal swing is fixed on concrete base. If installation is carried out on low-density soil, then you need to use clamps made from reinforcing bars. It is necessary to sharpen the ends of the clamps in advance so that they can be inserted into the ground to a depth of 50 centimeters without any problems.

An anchor bolt can serve as a fastening on a concrete platform. As a rule, they are installed separately in prepared places. As soon as the threads are tightened with nuts, it is better to cut off the ends of the screws that stick out with a grinder.

How to make a septic tank in a private house with your own hands?

Everyone wants to have a beautiful and comfortable place to relax. For many, the dacha becomes such a heavenly place. How to apply country cottage area so that he invariably gives you good mood? Let's go back to childhood for a moment. Remember how much pleasure you got from such a simple thing as a swing. They bring pleasure to both children and adults.

Making a swing for your dacha with your own hands is not that difficult. If you have at least some plumbing and installation skills, this task will not cause you much trouble.

The designs of swings are very diverse. Both may be present here budget options, concocted from the remains of construction, and real masterpieces of architecture.

You can purchase ready-made wooden swings for your dacha of good quality at good prices from the Kupistol company.

Types of swings for the garden

• swing-scales are a children's swing for a summer residence. The principle of the device is a board with two seats in the middle metal pipe on two racks;
• a simple swing on two ropes is the simplest design. A seating board suspended from two points;
• a swing-sofa on four ropes is the most common type of country swing. They are a bench with a back, suspended from four corners.

Swings can also be divided into stationary and portable. In the second option, the swing can be put away indoors for the winter and moved around the site at your discretion.

Swings can also be divided into stationary and portable.

Material for production

The following materials are used for hanging components:

• rope;
• rope (rope for mountaineering);
• steel rope;
• chain with a small link;
• steel rod;
• steel pipe.

To make a seat you can use:

• wood - boards, plywood;
• wood placed on metal corners;
• metal - rod, strips;
• plastic – for child seats.

Swing supports

A simple swing can be hung almost anywhere. Most often, a strong branch is chosen. You can also fit a crossbar between two trees.

For a swing-sofa you will need strong supports. They can be:

• wooden - two supports crosswise;
• metal - two supports dug into the ground or square with a frame below;
• metal - one pillar at a time, reinforced with a concrete screed.

How to make a simple swing at the dacha

The simplest option, which is perfect for children, is a simple wooden swing. If there is no rest area suitable trees, you can build supports from four logs. We bury the ends of the support into the ground to a depth of about 70 cm, and connect them together at the top with a pin or bolts and washers. Please note that the angle between the posts must be quite large for the structure to be stable. The fifth log will serve as the top crossbar; we also fasten it with bolts. Using fasteners sold in any hardware store, we attach a rope (strong cord, metal cable) to the crossbar. We make the seat from a board 30-50 mm thick and attach the cord using hooks. The cord can be tied or special clips can be used. You can hang such a swing on four ropes. In this case, the cable is threaded into a hook or ring at the top so that it does not slip; under the ring it is intercepted with a clamp.

You can hang such a swing on four ropes.

Wooden beam option

To make such a swing you will need a wooden beam and slats. Timber supports can withstand a load of about 150 kg

A wooden beam measuring 10x10 cm will increase the strength of the swing, but will make the structure heavier. It is better to use material with a section size of 5x10 cm.

We assemble a support from the beams, starting from the lower frame. We calculate its dimensions by adding 40-50 cm to the seat dimensions. They are attached to the frame vertical bars, forming a triangle. The structure is secured at the top by a vertical crossbar. All main fasteners are made using metal corners and self-tapping screws. For reliability, we attach another horizontal beam between the two posts on one side.

We make the bench, starting with the frame. Separately from the bars we make a frame for the back and for the seat. We screw the material from which we planned to make the swing onto the frames. It can be a board, slats or plywood.

The structure is secured at the top by a vertical crossbar.

We connect the finished back and seat together using metal corners. Before this, we determine a comfortable seat angle, on average it will be about 120 degrees.

We make the armrests for the bench from slats and also fasten them with self-tapping screws.

We hang the swing from the top crossbar with a chain or metal cable. Metal brackets or hooks are used as fasteners; we use them to secure the chain on the back and seat of the swing.

The swing for the dacha is ready. The height of the swing is adjusted so that the feet of the person sitting on it reach the ground. This design can be moved quite easily. When standing on the ground, the lower beam must be treated with a protective solution.

Swing for a summer house made of metal

Such swings are more durable; depending on the design, they are designed for a weight of 300 kg or more, but they will be stationary. For manufacturing, you must have welding skills. If desired, small swings of this type can be made mobile by expanding the distance between the lower ends of the supports and welding the base frame onto them.

For racks, choose one of the following materials:

• steel pipe with a diameter of at least 5 cm;
• metal channel or profile;
• steel corner.

Using welding, we connect the pipe, starting from the base of the structure. We get a rectangle, place two triangles vertically on it, and connect it at the top with a horizontal crossbar. The cutting angle of the pipe at the upper junction of the sides of the triangle is 45 degrees. We weld hinges from the reinforcement onto the top crossbar.

For manufacturing, you must have welding skills.

The support design option is without the lower rectangle. In this case, the racks must be buried 1 meter into the ground; if the swing is planned to be heavy, make a concrete screed.

The base for the back and seat is made from metal corner. We make two rectangles out of it, connecting them to each other at an angle of at least 100 degrees.

We weld hinges in the corners for hanging. We coat all metal parts with primer and paint. oil paint. On ready-made base We lay a wooden board; for convenience, it can be sheathed on top soft material or linoleum.

We cover all metal parts with a primer and paint with oil paint.

Choosing a place to install a swing requires special attention. There should be enough space when swinging the swing. It is better to choose a shaded place; if you plan to build a gazebo, a swing can be installed inside it. Wooden crafts must be protected from moisture and precipitation. This can be done by treating the wood with special solutions, or if the design of the swing allows, painting it with paint.

A swing made by yourself will give your dacha a unique flavor and create an atmosphere of love and comfort. Enjoy your holiday!

Video about swings for a garden plot