A simple bench made of boards. Video - Garden benches

Do-it-yourself bench for giving: photo, drawings, diagrams. Arrangement personal plot carried out various methods: sheds and gazebos are installed, paths are laid, flower beds and flower beds are broken. The final nuance is garden furniture. For arranging a small recreation area, a do-it-yourself country bench with a back is suitable: drawings and diagrams of beautiful designs, as well as recommendations for their creation, you can find in this article.

A garden bench with a backrest can be a key element in the design of the local area.

Types of designs and photos of country benches

Modern assortment garden furniture is quite extensive. Classification of products is carried out on the basis of such signs:

• characteristics;
• material;
• functionality.

Wooden bench located on the veranda of a private house

Photo of country benches with their own hands, their functional side

Functional features furniture are valued along with their practicality and durability. All products are divided into two large groups:

• benches used exclusively for sitting;
• multifunctional benches (the product can perform several functions - be a bench, rocking chair or table).

Bench with backrest made of logs and planks

Helpful advice! Use unusual design transforming benches to save space in the garden. It can easily be converted into a table for writing or eating outside.

Many homeowners install swing benches. Materials are used to create them. different type, and the structures themselves can be given an interesting shape. To make it convenient to use such a bench, it is imperative to build a canopy over it. It will provide protection from the sun and rain.

Bench-swing - a great option for garden furniture

Popular for making do-it-yourself benches with a back, having a stationary type of placement. Most often they are made of concrete or brick, and a special place is selected for installation. Such products are not afraid of the influence of the sun and moisture.

There are folding benches with small dimensions and a mobile design. They are useful if the suburban area is rarely used. During the absence of the owners, folding benches are removed to the garage for storage or to the house.

Wooden bench with a back used to organize a seating area in the garden

Photo of a bench for a summer house with your own hands made of wood and metal

Metal products have the highest strength characteristics. They are reliable, durable and can be used throughout the year. Metal structures are unpretentious in terms of maintenance. It is enough to periodically cover their surface with an anti-corrosion agent that will protect the benches from the harmful effects of moisture.

An example of a wooden bench with a metal frame

A bench made entirely of metal will have a very massive appearance, so modern designs are made using forged patterns. It should be remembered that for this you need to acquire a welding machine.

Most of the owners of suburban areas, who decide to make a bench for a summer residence with their own hands, prefer wood. This material becomes the basis for creating shops with beautiful design, excellent operational characteristics and warm texture. Regardless of the design of the garden or yard, wooden crafts you can always harmoniously fit into the landscape.

Combined bench made of wood and metal with forged elements

Helpful advice! Take oak or larch for work.

In order to protect the surface of the product, it is necessary to cover it with a varnish or paint. This will prevent damage to the wood, which is caused by insects, fungi, mold, as well as moisture and sun. Using a lacquer as a finish will help preserve the natural grain of the wood.

Metal products are characterized by high strength and long service life with minimal maintenance.

Photo of a bench for giving with your own hands made of stone

If you prefer practical options benches, you should pay attention to products made of stone. This type of material is characterized by low cost and long service life, and the structures are durable, reliable and aesthetically attractive.

The stone belongs to the category of materials natural origin. Despite this, the designs of such benches will not always be able to support any design and style of the garden. Stone elements must be present on the site as an addition. The shops look especially advantageous against the backdrop of a residential building, partially made of stone.

Bench made of natural stone soft mattresses and colorful pillows

A good ensemble will be made of stone:

• steps;
• tracks;
• reservoirs;
• gabions;
• flower beds.

The supports of fences, arbors and awnings can be made of stone partially or completely. If at least one of these elements is present on the site, stone shops will always come in handy. However, it should be remembered that such products do not have a back.

Even the simplest stone bench looks elegant, noble and solid.

DIY photo of country benches: successful homemade products made of plastic and other materials

Plastic products have a number of advantages, which include:

• simplicity and low weight of the structure, due to which the transportation of the material does not cause difficulties, and the bench itself can be moved from one place to another;
• profitability;
• wide choice color solutions, which allows you to make a product that will subsequently fit well into the design of the garden;
• practicality (folding-type structures are easily disassembled and stacked in the trunk and also easily assembled on site).

Plastic benches are lightweight, making them extremely mobile and easy to transport.

Helpful advice! Use the drawings of garden benches with your own hands to create structures from combined materials. You will be able to endow your product with positive performance characteristics that are inherent in each type of raw material used.

Combined combinations of materials different in texture, texture, color and origin are used not only in decorative purposes. The most common option is a combination of stone and wood.

Combined bench built from metal and wood

Designs made of wood and complemented by stone or metal elements look original. In such projects, wood creates a soft and beautiful texture, while stone and metal are responsible for strength.

Do-it-yourself examples and technologies for creating country benches and benches

The designs of the bench and bench have some distinctive features. Shop building - simplest way organize a seating area in the garden. The product does not have a back and, unlike a bench, has a simple external design.

Creating a shop - fast and easy way garden seating arrangements

A do-it-yourself wooden bench with a back can have a more complex decorative design:

• non-standard form;
• armrests;
• design, decorated with carved and forged elements.

The simplest ideas for creating country shops

To revive the design of a simple bench, it is not necessary to come up with a complex drawing and puzzle over the creation of additional accessories for the garden. It is enough to use two wooden boxes and several boards.

Original wooden bench with a table designed to seat two people

The boxes in this case will serve as supports. After making the shop, they can be filled with earth and organize a small flower bed. A seat is made from the boards, which is installed between the boxes. The material must be sanded well with sandpaper, remove all irregularities and burrs.

Helpful advice! From benches based on boxes, you can make a garden bench with a backrest with your own hands. It is enough to install the structure against the wall and nail it onto its plane necessary place several boards as a back.

Rice. 1-1. Scheme of a bench with wooden flower boxes: 1 - arrangement of a bench and calculation of materials: A - logs (2x4 boards 17 1/2" long - 6 pcs., 2x4 boards 20 1/2" long - 4 pcs.); B - drawer bottom (3/4 plywood 20 1/2” x 20 1/2” - 2 pcs.); C - trims (1x4 boards 23 1/2” long - 16 pieces); D - side lamellas (boards 1x6 25” long - 32 pieces); E - trims for facing the top (2x4 boards 45" long - 8 pieces); F - seat frame (2x4 boards 63" long - 2 pcs., 2x4 boards 17 1/2" long - 2 pcs.); G - cross bars (1x2 boards 17 1/2” long - 5 pieces); H - seat (boards 1x4 60" ​​long - 5 pcs.); 2 - side facing; 3 - installation of the walls of the flower box; 4 - mounting dimensions of the walls of the box; 5 - diagram of the device for the bottom of the flower box

Wood structures have a certain disadvantage. The material itself requires constant care, and in this case the tree is also in contact with the soil, it is necessary to periodically water the plants. To make the shop more practical, wooden boxes can be replaced with concrete or stone pedestals. Concrete flower beds can be made independently or purchased at the store.

For the seat, you should use processed boards or half a log. The choice of raw materials depends on the style in which the design of the garden or patio is made. It is recommended to fix the seat with metal corners fixed to concrete using dowels, and to wood using through bolts or self-tapping screws.

Rice. 1-2. Scheme of a bench with wooden flower boxes: 6 - mounting dimensions of the seat frame; 7 - strengthening the design of the bench; 8 - installation of seat rails; 9, 10 - drawer installation

As supports, you can use flowerpots with dwarf trees or ornamental bushes. Only one, but very important requirement- the container must be very strong. A hole is cut into the seat in the shape of a flowerpot in the place where the legs of the benches are usually located. The size of the hole should be sufficient to allow the plant to grow and care for it, however, it should not exceed the size of the container. Essentially, a plank seat is placed on top of the flowerpots and fixed by gravity and the weight of those seated.

Corner wooden bench with flower boxes installed on the veranda of a private house

Making country benches from wood with your own hands in ethno style

Ethno and rustic design styles are often used in interior design. A country house, cottage or cottage is a great place to create an eco-friendly and natural corner suitable for family vacation. This design can be continued in the garden. To do this, it is enough to make a bench with a backrest with your own hands from logs (Fig. 1) and other natural materials.

Helpful advice! For the construction of the structure, logs with or without bark can be used. To process the material or leave it in its original form - depends on your wishes and the design of the site.

Benches made of logs are distinguished by originality and environmental friendliness

Do-it-yourself technology for making a country bench from a log

To form a seat, it is enough to saw a tree trunk along. This can be done exactly in the middle (in the diameter zone) or by moving the saw closer to the edge (in the medium diameter zone). The back is made from a tree trunk with thinner or you can cut closer to the edge. As a result, this element must be thinner and lighter than the seat part.

Rice. 2. Garden bench made of logs in the courtyard of a country house

Legs can be made from the remains of a log. They are connected to the seat part with metal pins. It is done like this:

1. In the parts to be connected, holes are made for the pins in the appropriate places. The diameter of the holes should be slightly smaller than the diameter of the fastener.
2. The pin is driven into one of the holes approximately in the middle of its length.
3. On top of the free edge of the pin, the second part to be connected is placed and also hammered. In this case, the blows fall not on the pin, but on the wood.

Ethno and rustic styles are great for decorating a personal plot

Fasteners are hammered with a sledgehammer or hammer. Since wood is structurally quite soft material, hammer blows may damage its surface. To avoid this, you need to put an unnecessary board under the instrument.

Pins provide a reliable connection of all parts. To strengthen the fixation, you can install 2-3 pins.

Bench with a back made using logs

Ethno style in do-it-yourself country benches with a back: additional ideas

In the ethno style, you can create a design with a non-standard design. The highlight can be, for example, the manufacture of a bench using curved branches of different diameters. Before assembling the product, these branches are processed and skinned. In other words, the bark is removed from them, and then the surface is polished with sandpaper. To assemble the seat, you must use unedged board. It is processed in a similar way.

Various options wooden benches created in ethno style

Note! All elements of this design have rounded shapes, and the seat boards face forward.

If your summer cottage has a wicker fence, you can use the same design option with some changes. Short seat boards can be replaced with long ones by placing them along. The back is formed according to the principle of weaving from branches of medium thickness, which bend well.

Rustic bench will be a unique object on garden plot

To make a wicker back, it is not necessary to have any special skills. You may not get a very neat result, but this is not necessary. The back should be simple and unobtrusive, coarse weaving will only increase it. decorative properties. Branches can be placed tightly or, conversely, leave gaps between them so that your bench “breathes”.

A bench made of logs is installed on covered veranda country house

A bench as an alternative to a do-it-yourself cottage

Despite the absence of a back, this scheme (Fig. 3-1) for making a bench looks quite attractive due to the characteristics of the material from which it will be made. The design itself has a very simple structure, so everyone can handle the technology of its creation.

For the legs you will need a rounded timber. If you have logs with a small diameter, you can save on the purchase of material and trim them yourself. The original appearance of the bench is obtained due to the fact that the bars are stacked one on top of the other and fixed. The result is a beautiful support for the product.

Rice. 3-1. The procedure for manufacturing a simple wooden bench: 1 - drawing up a design drawing

Calculation of parameters and required materials

The height of the bench for giving can be adjusted according to your needs. This indicator also depends on the diameter of the timber that will be used in the work. To calculate the amount of material, you need to determine how many bars will be stacked one on top of the other to form the required height of one of the legs.

Size chart:

In our case, 5 bars are required, the length of which is 0.45 m. Calculation formula: 5x0.45 \u003d 2.25 m. Based on this, 4.5 m of timber (2.25x2) will be required to build two supports. The seat will consist of five boards 1.2 m long. For its manufacture, the following amount of material will be required: 5x1.2 \u003d 6 m.

Rice. 3-2. The procedure for manufacturing a simple wooden bench: 2 - cutting wood for the legs of the bench; 3 - drilling holes in the details of the legs; 4 - preparation of boards for the seat; 5 - processing the edges of the seat parts

Helpful advice! To round the edges of the timber, you can use a cutter or purchase ready-made profiled material. Its cost is higher, but profiled timber is much more convenient in work.

Initial stage: preparation of material

To begin with, boards for the seat are being prepared. The material is cut into the required number of boards of the appropriate length and processed. Sharp corners should be rounded off. Use the possibilities of the router for this or grinder. If you do not have such a tool at hand, it will be enough to process the edges with sandpaper.

Rice. 3-3. The procedure for manufacturing a simple wooden bench: 6, 7 - marking the details of the legs; 8 - drilling holes at the intended points; 9 - applying a protective coating to the parts of the seat

Grinding with sandpaper is a long and laborious process. To simplify your work, you can order the grinding of the material at the sawmill. After the boards are prepared, they need to be opened with a varnish composition. It can be a completely transparent varnish or a tinted composition (the choice of topcoat is up to you).

The bars intended to form the legs of the bench are tightly stacked next to each other so that their edges form a straight line. Using a pencil and square, mark the areas where the fasteners will be installed. The lines should be distributed along the entire length in increments of 7-10 cm.

Rice. 3-4. The procedure for manufacturing a simple wooden bench: 10, 11 - fastening the legs to the seat; 12 - view of the finished product

Assembling a wooden structure: mounting fasteners

Metal pins will be used as fasteners. An alternative replacement for them can be dowels made of wood. Holes are made for the installation of fasteners, the diameter of which is slightly smaller than the diameter of the pins, and the depth is half the length of the pin.

To fix the parts, the fasteners will be hammered into one of the bars, and the next element will be pushed through the hole on top of it.

A simple bench without a back can be used not only for sitting, but also as a table.

Helpful advice! Assembling the structure with pins - reliable way mounts. To increase the strength of fixation, you can use the adhesive composition during installation, but this technique will make the structure non-separable.

The pin connection is also used in the process of creating, according to the drawings, a do-it-yourself bench made of wood, the design of which is equipped with a back. A qualitative result can be achieved only if all the holes are located strictly one above the other. As a result, all parts during assembly should form an even edge line.

Wooden table and benches painted in White color, form a cozy dining area in the garden

After drawing the marking lines, you need to measure the distance from the edge, which should be the same. For these purposes, it is recommended to create a template. It is enough to take a piece of the bar, the width of which is 1.5 cm. It will serve as a kind of limiter. In other words, a distance equal to the width of this bar will separate the holes from the edge. Attach the template exactly along the edge line and mark the intersections with the already existing perpendicular markings.

The installation of the pins should be done in a checkerboard pattern, so you should place the holes not at each intersection of the lines, but through one. Holes are also made on the other side of the bar. They should be staggered in relation to the holes that were made earlier. As a result, when connecting the legs to the seat, each plank will have a pair of pins.

A simple bench with a backrest built from wood

The final stage of creating a bench made of wood

From a technological point of view, the previously described type of connection can be considered correct. However, the scheme of its installation is quite complicated for a person who does not have the necessary skills.

There is an easier way to fasten the structure:

1. The bars are stacked on top of each other.
2. Folded parts are fixed with clamps.
3. Performed through holes at three points (in the center and along the edges).
4. Through the holes, the parts are fastened with a long stud (do not forget to put washers under the nut and cap).

Original bench made from an old wooden bed

After that, the seat boards are nailed to these legs (on top) or you can make a pin connection in this place.

Helpful advice! To hide the placement of the nails, prepare a masking composition from a mixture of very fine sawdust and mastic intended for wood. Choose mastic to match the shop. Apply this mixture to all joints. After drying, the surface should be sanded.

A variant of a simple board bench attached to a tree in the garden

When the assembly of the structure is completed, grind all the parts. Their surface should be as smooth as possible. After that you can apply top coat. Use for this purpose a varnish composition or wood paint intended for outdoor use. It is better if the finish coat is translucent. In this way, you can leave the natural pattern of the wood visible.

Wooden benches with comfortable soft seats decorated with pillows

Do-it-yourself drawings of benches for giving: photos and descriptions

Bench for giving due to the presence of a backrest, it has a more convenient design than a bench. You can lean on it and relax your back. The capacity of such products can be different, but usually do-it-yourself drawings of wooden garden benches are made for 2-4 persons. This is done for the reason that the long structure needs to install an additional support. As a result, the process of creating a product becomes more complicated. In fact, there is enough space for 2-4 people, so you can limit yourself to making the simplest designs.

The bench, due to the presence of a backrest, has a more comfortable seating design compared to a bench

Do-it-yourself country bench with a back: design drawings for two persons

To make a bench for a summer residence with your own hands with a wooden back for this project (Fig. 4), you need to acquire the following tool:

• drill;
• a set of drills;
• hacksaw;
• planer.

Note! The design is intended for installation in the garden, on the balcony or terrace.

Benches built from wood harmoniously fit into any landscape

It will take you no more than one day to complete all the work on creating a bench. A square bar made of pine will be used as the main material. The parameters of its section are 6x6 cm. You will also need "twenty" boards. Before cutting these boards, they should be planed until parts with dimensions of 5.8x5.8 cm are obtained.

Do-it-yourself bench for giving from a tree: step by step instructions

Assembly do-it-yourself benches for summer cottages from pine bars is carried out in the following sequence:

• with the help of dowels and adhesive composition, we assemble the legs for the U-shaped sides. Then, using the same fastening method, we fix slats (5.8x2 cm) and prongs (3.5x3.5 cm) mounted on the sides on them;

Rice. 4. Drawing of a wooden bench with a back for two persons

• to mark the locations of the reciprocal holes for mounting dowels, use a marker;
• connect the sidewall and the longitudinally located rail. In order to mark the position of the sidewall, a 2 cm thick spacer should be used;
• fix all elements while drilling holes with clamps. This will allow you to achieve accurate mating between the connected parts of the structure;
• before doing final assembly, sand all the elements well.

The last stage of construction is the application of a protective agent and a top coat.

For more long term operation of wooden structures need to be treated with a protective agent and applied with a finish coat

Do-it-yourself country bench from improvised materials: the use of pallets

From such improvised materials as pallets, you can create an interesting bench design (Fig. 5). It can be installed not only in the garden, but also on the terrace and even inside country house. Three pallets are required for work.

Manufacturing steps:

• one of the pallets is divided in half. These halves will subsequently be the back of the product. Cutting must be done so that after assembling the parts of the back and seat form a figure of a geometrically correct shape, and all edges coincide;

Rice. 5. The procedure for making a bench from pallets in six photos

• two other pallets are knocked together with nails. We fix the back halves to them;
• a mattress of the appropriate size should be placed on top of the structure. You can use cushions from an old sofa, reupholstering them first, or sew new ones. You can also put a few small pillows on the back.

Using wooden pallets is a fun way to create original garden furniture.

Helpful advice! You can leave the mattress lying still or fix it with straps. For greater functionality, wheels can be added to the design.

Do-it-yourself drawings of a country bench with a wooden back: Transformer design

For the manufacture of the structure, you will need to purchase pine lumber.

Materials for work:

Manufacturing technology of a transformer bench

Following step by step instructions, you can create an interesting bench, the design of which can be transformed into a table with two benches (Fig. 6).

The main stages of making a bench:

• having created the supporting parts according to the drawing, attach 3 boards to one of them. The seat will be formed from these boards. At the same time, do not forget to step back from the end part by 5 cm. 4 self-tapping screws must be installed in each board. Two of them will fix the seat to the support on one side, the rest are designed to fix the seat to the other support (on the other side of the product);

Scheme with mounting dimensions of the transformer bench

• for each nodal assembly zone, it will be necessary to install 4 fasteners;

Helpful advice! When assembling the assemblies, apply wood glue to these areas. The adhesive composition will increase the strength of fixation and the durability of the entire structure.

• after all the parts are prepared for work, the legs, which have backrest and seat support, should be sawn from the end at an angle of about 75º. Using self-tapping screws designed for working with wood, connect the legs in pairs with the middle bars. Optimal length fasteners is 5 cm;

Rice. Fig. 6. Scheme for creating a transformer bench: 1 - kinematic diagram of the transformer in the "table" position (1 - position limiters B (pipe 20 × 20 mm, length 35-49 mm), 2 - support rod); 2 - detail C (pipe 40 × 20 - 2 pcs.); 3 - connecting jumpers (pipe 20 × 20 mm). D - for an external bench, D1 - for an internal one; 4 - parts B, B1 (pipe 40 × 20 mm). B1 is mirrored with respect to B; 5 - bench leg (4 pcs.), where: A - steel pipe 40 × 20 mm, 1 - jumpers (pipe 20 × 20 mm - 4 pcs.), 2 - support rod

• next is the back. In the process of transformation, it turns into a countertop. Locate the longitudinal edge of the support board. Its length is 32 cm. Here you need to attach three boards 150 cm long. In this case, the indent from the end in this case will already be 8 cm;
• boards are mounted so that a gap of 1 cm is formed between adjacent elements;
• in the support board, you need to make 3 holes, the diameter of which is 0.8 cm. It is better to perform this procedure in advance. These holes will be used to fix the back of the bench in a horizontal position.

One-piece wooden structure for the garden, consisting of a table and benches

The final stage of the construction of the transformer bench

To create axes of rotation, make 2 holes in the top of the rear leg. Fixing the back to the base of the product will be carried out by a pair of M8 bolts.

One of the holes made will be axial, the second - ordinary. To simplify the operation of the bench, equip the bolt in the area of ​​\u200b\u200bthe axial hole with a nut with 6 edges, for the second, a wing nut is suitable. She should bend her mustache. Due to this simple manipulation, fasteners can be turned away / wrapped without the use of additional tools, but only by hand force.

The key link in the patio is a wooden bench with a back

Upon completion of all work, you need to check the design for operability. Set the backrest in an inclined position and secure it with bolts. Remove the fastening element from the hole and move the backrest to a horizontal position. To fix it, place the bolt in its original place and secure with a nut. The design is completely ready for operational use.

When creating benches, you can experiment. The main thing is that at the same time the product turned out to be durable and practical.

Perhaps only classic vegetable garden does without benches, except for potatoes or cucumbers in the garden there should be nothing. But even a small garden can hardly be imagined without benches. The garden is still intended for relaxation and admiring nature, and standing up to do this is not very convenient. Currently, the choice of such structures is quite large, wooden and metal garden benches are especially popular.

Types of garden benches

Regardless of the design and size, the purpose of any bench remains the same - it should give a person the opportunity to sit down, relax and slowly enjoy the view. cozy garden. Shops can be classified according to several criteria, for example, by the material from which they are made and by design.

Materials for making garden benches

There are several popular materials:

• plastic - the advantages of benches made of this material include resistance to climatic influences, low weight and a relatively low price. On sale there are options for folding structures, it is convenient to take them with you during periodic trips to the country;

• wood - do-it-yourself garden benches are usually made from this material. The tree looks great on the garden plot, and indeed it is considered a classic, and the classic is always in price;

Note!
Wood, even with protective coatings, is much less resistant to, for example, moisture and insects than plastic, stone or metal.
So the wooden ones will fail first.

• metal - regarding metal products, then 2 options are possible: home-made benches from a profile pipeline or forged ones. It is impossible to make forged benches from scratch without having blacksmithing skills, the maximum that can be done is to buy ready-made forged sidewalls and then assemble the bench yourself;

• stone garden benches- record holders in terms of durability. Under the bench, you can adapt 1-2 large boulders, or use purchased marble and sidewalls, the whole question is in the price and in the general style of the design of the site;

• concrete - the sidewalls can be cast from concrete, and a concrete slab will act as a seat;
• combined options- the most common type is a combination of a metal frame and wooden planks (back and seat). There are options for combining stone and wood.

Note!
The use of wood makes the bench more comfortable.
In cold weather, it is not pleasant to sit on ice metal or stone; from this point of view, wood is preferable, because its thermal conductivity is much lower.

Garden bench design options

At first glance, there is nothing complicated in the design of the bench - 4 legs, a seat and a back.

But there are also more complex designs:

• a bench without a back is the simplest option, a dubious option in terms of comfort, because you won’t be able to lean back and relax;
• garden bench with a back - adding a back brings the comfort of rest to a new level;

• bench with a table - with this option, a pair is installed on one base. This design is optimal for communication in nature;
• bench with a canopy - can be considered as an analogue of a mini-arbor. However, protection from slanting rains is weak, so consider such a design as full replacement gazebos should not;

• benches created in an artistic style, the focus in this case is on the appearance. Instead of standard sidewalls, for example, figurines of fairy-tale creatures, etc. can be used.

If the bench in your garden is planned not in the form of a large stone or a fallen tree trunk, then you will have to spend a little time thinking about the design and calculating the required number building materials. A properly drawn up drawing is the main basis of a good shop.

Drawings of garden benches made of wood, and of any other material, must necessarily contain not only a general image of the structure, but also the detailed dimensions of the main elements.

wooden bench

There are several manufacturing options:

• use large tree trunks as the main elements. Half of such a trunk may well lie on the ground and, due to its large thickness, act simultaneously as a seat;

• just dig a couple of posts (or concrete) and use them as the basis of the structure;
• bar construction is the most common option. It makes sense to consider an example of such a construction in more detail.

As for the sizes, everyone selects them based on their requirements for the shop, but you can focus on the following values:

• in height, the back most often does not exceed 50 cm;
• the height of the bench, that is, the distance from the surface of the earth to the surface of the seat, is also taken approximately equal to 50 cm;
• the angle of the backrest is important, it can be taken in the range of 15 - 30ᵒ.

Note!
The price of the bench will not change from this, and the photo comfort level can be seriously affected.
If the back is at a right angle to the seat, then the back will be constantly tense and you can forget about rest.

The design of a typical wooden bench looks something like this:

• the sidewalls are assembled from wide beams (as a rule, the sidewalls are connected crosswise with a selection of grooves at the junction). That part of the cross, which will also be the basis for the backrest, is made longer by the height of the backrest;

• if the width of the bench exceeds 2.0 m, then to ensure rigidity, the same structure as on the sides must be placed in the center, otherwise the seat will strongly sag under the weight of a person;

• sidewalls are connected in one piece square bars. The load on them will be small, so you can use a small section;
• after that, garden benches and benches are sheathed with wooden planks. It is not necessary to make the sheathing solid; gaps of 1-2 cm can be made between individual planks;
• at the final stage, it remains only to cover the tree with protective compounds.

Metal and combined benches

Purely metal constructions do not meet very often. The fact is that the weight of such a design turns out to be quite large, and the cost of the product increases. Therefore, the seat and back are usually made of wood.

Combined options can be made by hand, we are talking mainly about structures using a profile pipeline.

All work comes down to a few points:

• the side parts of the frame are made of pipes. The best option can be considered the one in which the entire sidewall is made of one pipe. Of course, a welded joint can also be used, but this complicates the work;

Note!
A homemade garden bench made of wood and metal will most likely require pipe bending.
For this, either a pipe bender is used, or other methods (for example, filling the pipeline with sand) and subsequent manual bending.

• when sheathing the frame with wooden planks, a bolted connection is used.

In the case of forged structures, everything is much simpler - forged parts are bought, and the gardener only has to pick up a suitable tree and sheathe a metal frame with it.

stone benches

When it comes to how to make a garden bench out of stone or concrete, it all depends on general style future design.

There are several options:

• a small shop can be made even from small stones. In this case, oblong boulders are used for supports, and flat stones for the seat. Most often, such designs do without a back;

Note!
It is allowed to use a little mortar in such designs so that the connection between the supports and the seat is more durable and reliable.
The solution should not be visible.

• the bench looks original in which both posts are made of masonry (using natural stone), and a heavy marble slab is simply laid on top. It is also possible, when laying the supports, to concrete the frame for the back in them, and make the back itself forged.

Unusual design

In a separate category, it is necessary to single out the author's benches, it would be more accurate to call them a work of art than simple fixture for relax. As for the material, the use of wood gives the greatest scope for creativity, of course, in this case, detailed drawings of benches for the garden are not needed, you can only estimate overall dimensions designs.

The following options deserve attention:

• ring bench - a common design, but arranged around a tree, in place of the usual seat, an emerald green lawn looks unusual;
• a bench can be arranged between 2 flower beds;
• a bench looks curious, arranged, for example, in the mouth of an animal;
• stone articles can be decorated on both sides with graceful figurines;
• you can make a bench in the form of a huge bunch of bamboo, in the central part of which there is a cutout for sitting.

In conclusion

garden benches- an excellent ground for creativity. Despite the abundance of standard designs, you can always stand out and come up with your own shop design. Of course, the flight of thought should not go to the detriment of comfort. The information provided will help you navigate the mass of standard benches and offers several unusual options.

The video in this article shows an example of making a garden bench.

Benches and benches in the garden at their summer cottage are a popular place to relax. Sometimes putting an ordinary bench is not interesting and trite.

After all, it is possible to build a whole corner for relaxation and comfort, so as not just to sit on a bench, but already enjoy nature, from your garden, from fruits planted with your own hands. There are many different ideas here.

Bench structures are usually lightweight and do not require special skills. Anyone can create a seating area with a bench if they wish.

Idea options

Everyone saw a photo of an ordinary bench. But the most a simple shop I don’t want for my garden, I want something more original and beautiful.

If everything in your garden is already decorated and the whole area is in order, then the bench will never become superfluous. And, if you are just starting to equip your site, then it's time to start with bench equipment.

wooden bench

A do-it-yourself bench made of wood will harmonize well in the garden with all sorts of flower beds of beautiful flowers.

The easiest option for building a garden bench is two wooden boxes in which inflorescences grow, and between them a couple of sanded boards. If necessary, this bench can be placed near the wall, if possible.

Many people do not like such material as wood, because it gets wet quickly and is very difficult to care for. Instead of wooden material, stone and concrete come to the rescue.

In order to make a bench with a back, you need to try a little. For the back, most often they buy already processed wood. The seat is easiest to fix with metal corners.

To concrete material they can be attached thanks to dowels, and to wooden material using self-tapping screws from the bottom or bolts through.

Many summer residents are wondering how to make a bench on their own for home and garden. And every year this question is gaining popularity.

Many give preference to ready-made store benches, but by doing the work yourself, you can completely surrender to the process and turn on your imagination completely.

metal bench

Metal benches are installed by a minority, since, of course, they are aesthetic and original products, but in the summer it is material that heats up to crazy temperatures, and if it gets even a little cold, the material becomes icy, and it is impossible to sit on it.

If you really want to use metal in the process of creating a bench, then you should combine two materials in your work: metal and wood. At the same time, the seats and backs are made of wooden material, and the structures of the legs and additional elements are made from metal.

There are many different original variants benches in this style.

Note!

Great popularity in recent times received benches from a pipe. Rectangles are made from a profile pipe with the help of cooking, and jumpers are attached to the side walls, on which the bench seats will rest. This is a very reliable and safe option for creating a bench with your own hands.

If this option is slightly improved, then armrests are used for greater convenience and comfort. A bench in the garden with a wide seat, like a sofa, will also look elegant and original. This is comfort, convenience and luxury!

For complete comfort, you can put decorated pillows on such benches so that you can not only sit, but also take a nap in nature.

Board benches

A simple bench made of boards will also look aesthetically pleasing, the main thing is to be able to do it. There are the simplest designs, like ordinary benches, and there are more complicated ones in the form of a sofa or an elongated chair.

AT modern style it is easy to assemble such a bench, you only need to connect rectangles with partitions made of thin boards to each other.

The main thing is to turn on the fantasy. Even the most uncomplicated work can become the source of a masterpiece.

Note!

Based on thin boards, you can make various forms benches. For example, in the form of the letter P. The main thing here is to fix the seats and legs well and securely. Such a bench is easy to manufacture, but will last a long time.

DIY bench photo

Note!

Garden furniture can become not only an interior decoration, but also a great place to relax. A do-it-yourself shop is a source of pride and a touch of the future furniture set.

Making this accessory is not as difficult as it seems. It is important from the very beginning to decide on the material and the appropriate design.

About materials

Plastic parts

Such a bench will have a lot of advantages.

• Affordable price range.
• Easy care.
• Mobility.

pleases big choice color options.

Plastic furniture has its drawbacks.

1. Cheap look. Unlike wood.
2. The ability to fade in the sun;
3. The surface deforms quickly.

What about the tree?

Ideal for making furniture. Amenable to any type of processing, has a noble appearance, does not require complex work during installation. Any type of wood is allowed. The main requirement is the absence of defects, high-quality drying.

stone products

Material of natural origin with an attractive appearance. Will fit into the interior with any design. The composition will look stylish and unusual, elegant. A natural stone It has many advantages, but it is not without its shortcomings. It's easy to do this too.

• It is not always safe to sit on such benches, including for health. The tree has no such disadvantages.
• It is recommended to purchase pillows and warm blankets in the kit.
• Such benches cannot be moved from place to place, only stationary installation is possible.

What about metal?

An excellent decoration in any garden will be garden benches, for the manufacture of which the forging method, cold or hot, was used.

It's stylish and beautiful designs for which it is better to purchase decorative ornaments. Metal will be a good addition to glass or wood. Make it simple.

Shop Requirements

1. Convenience. The bench should be ergonomic, this is especially important for relaxation. Comfort and convenience play a role. Good option- the presence of a back in the product.
2. It is important that the bench can withstand even serious loads. Accordingly, the quality of fittings and furniture should be on top.
3. The material must withstand any changes without deformation. weather conditions, because it is created for outdoor installation.

Design and features

1500 millimeters - this length for the back and seat of the bench is enough to comfortably seat three people. Other dimensions matter too. The seat width reaches 400 mm, the back angle is 18-20 degrees. The back height is 900 millimeters, the seats are 450.

From the materials we need to take:

• Lacquer, primer;
• Paper with the effect of sandpaper for wood;
• Screwdriver;
• Electric planer for wood. They will process chamfers, grind the surface of the boards.
• We will cut the boards using an electric jigsaw.
• Required number of screws.
• We will strengthen the design of the bench with our own hands with self-tapping screws with dimensions of 40 by 40 mm.
• For the front legs of the bench we make blanks. Thickness - 35-40 millimeters, size - 360 by 150.
• Holders for the backrest and bench legs also require separate blanks. The thickness is the same 35-40 millimeters, but the size is 900 by 150.
• Do not make a product with your own hands without wooden planks. The thickness is the same, and the dimensions are 1500 by 150 mm.

Making a wooden structure

• You can immediately purchase boards for the bench that have the right size. If there is no suitable option, we use a jigsaw to cut the boards with our own hands. A miter saw will also become an indispensable tool. This can be done quickly.

• The wood must be carefully processed after the desired length has been achieved. Grinding requires blanks for the seat, backrest. With an electric planer, it is necessary to process the ends of the boards. The best way- rounded shapes.

• We set the correct angle of inclination with our own hands to the long rear legs of the bench. They also play the role of the frame of the whole structure. We apply markings on two wooden blanks with a length of 900 millimeters. It's not that hard to do everything.

• 400 millimeters - the height of the bench, we mark it first with our own hands. Additional processing on this section of the material is not needed. We make a cut of 20 degrees along the entire length of the product, starting from the segment. This forms the angle of inclination for the back. The angle of inclination and the height on the two legs at the back should be the same.

• The legs of the bench are assembled first. 280 mm - the distance between the elements in front and behind. A bar is cut across the entire width of the bench, which connects the legs. Its size is 500 mm. It is good if the strapping is top and bottom.

• The sidewalls of the bench are interconnected with their own hands after the assembly is completed. To connect, we use boards on which we will have to sit. They are screwed to the upper strapping bars using self-tapping screws. The gaps between the wooden blanks should have different sizes. They help to remove moisture, organize circulation.

• Let's move on to strengthening the bench with our own hands. Without this action, the product will not be durable and stable. We use beams to make bottom harness by the legs. We fasten two blanks with a length of 1500 mm to the front and rear elements. There may be one crossbar if there is not enough lumber.

• We mount the back in the bench with our own hands. This is one of the last steps. It is recommended to keep a distance of 380 millimeters from the seat for the second board, 200 millimeters from the seat for the first.

• All that was left was the finishing coat of the shop. Varnish and deep impregnation will always help to protect yourself from external influences as much as possible. You can forget about pests, mold and moisture.

How to work with metal?

Personal plots are decorated not only with furniture made of wood. Metal can also become an indispensable assistant in creating comfortable places for relaxation. It is not necessary to own the hot forging technique for this.

Cold forging is also quite suitable for this. AT single structure just weld the frame metal blanks. Decor elements will ennoble the appearance.

detailed instructions

• We start with the development of the dimensions and dimensions of the bench. standard height backrests - 800-900 mm. Width - 400-500 mm. Length 1500 mm. The most simple work- with angular shapes. It is recommended to start with simpler models.

• We make a frame for the seat. We cut the metal pipe. We need the following sizes: 2 fragments of 400 mm and 2 of 1500 mm. We weld the parts so that they acquire a rectangular shape. It is permissible to weld 2 additional stiffeners to make the structure more durable.

• Next we need legs. metal pipe we cut into 4 parts, 460 mm each. The blanks are then connected to the corners of the bench. Additional stiffeners between the front and rear legs will not be superfluous.

• Making the back. Between ourselves, we weld one workpiece 1500 mm long into another, 440 mm long. We then weld the structure to the part of the bench that is already ready. 15-20 degrees - the optimal angle of inclination for the back. Then the rest will be comfortable.

• The backrest can also be strengthened with stiffening ribs.

• At the final stage, all seams are cleaned. The frame is primed.

Beam and board: the simplest forms

Options and designs exist a large number of. There are also the simplest ones, some prefer woodcarving. They become true works of art.

A wooden bench without a back is the simplest solution. It is allowed to use a board up to 75 mm thick. Each element consists of two parts.

We assemble a seat from two boards, the ends are bevelled. It is better to provide a gap between the elements if you plan to place the structure on open area where there is no heating. The gaps compensate for the swelling of the wood, allow you to get rid of moisture in large quantities.

Each leg consists of two glued elements. A pin or dowel will make the connection more reliable. Two short beams for emphasis must be fixed on each of the legs. This will secure the seat itself. Self-tapping screws and glue, grooves are indispensable helpers for fixing. Beams and legs are attached to each board in the last stages of work.

Radius cutouts and curly elements complicate the work a little, but if desired, this task can also be solved without problems. For example, choose the shape of a rectangle.

Drawings are not dogmas, they can be changed at your discretion.

The beam is at the bottom if the bench is not very long. The beam itself becomes a stiffener in such a situation. Shkant involves the use of both closed and open mounting, the latter option is very unusual. The form of the material can be any. It is even allowed to use the options with which wooden houses are built.

Video gallery

Photo gallery

Good afternoon, today we will make a variety of benches with our own hands. I collected in this article all the SIMPLE WAYS make yourself a comfortable and beautiful bench. I will give detailed explanations and demonstrative photos, and tell you as clearly as possible how to make a bench. wooden(beams and boards) and improvised materials(pallets, pallets, old chairs, boxes, etc.). I will also give drawings, assembly diagrams, and step-by-step master classes.

All assembled models country benches I will post them according to their complexity - that is, we will start with the simplest and most concise methods - and end with real professional products worthy of the hand of a master. After this article, you will feel that you have become the very master who knows a lot about his business and can easily make a bench from absolutely any material, even if there is not much of it. And the bench will stand firmly on its legs and serve your family for years. And who knows, maybe you can even sell your benches to your neighbors - after all, they will also want to have such country benches on their site. And later you will start doing it, too, according to my articles-lessons.

In this article, as well as in the following articles in this series, we will look at ...

1. benches made from old chairs.
2. Bench chaise longue in French style
3. Beautiful benches made from bed headboards.
4. Master class of an elite bench from a chest of drawers.
5. Country benches with a back - from timber and foam blocks.
6. Benches for giving - panel with support on a solid sidewall.
7. simple drawing benches from edged board- in 15 minutes.
8. Country benches with a curved side.
9. Slatted benches for giving - with a curved shape of the seat.
10. Benches with backrest and armrests - 23 models.
11. benches under a canopy or classic pergola.

So, let's figure it out. And let's start with the SIMPLE WAYS to make a country bench with your own hands.

Model #1

Bench for giving

FROM OLD CHAIRS.

Here in the photo below we see an original and very simple bench - which is easy to make with your own hands from unnecessary chairs. Everyone in the country has old shabby chairs. Once upon a time you left one chair in the rain lacquer coating they were swollen, the soft upholstery had long since spread into shaggy holes. It’s a pity to throw it away, you put it against the wall of the garage or in a shed - and it continues to deteriorate. Then another comrade chair was added to it - but it is still nothing, and you keep it on summer veranda. And sometimes you see shabby chairs with a warped leg at the entrance (someone took it to the trash).

All these old robbers can be given a new valiant life. Paint them in a daring juicy color. And cover with a wide board - fasten it onto self-tapping screws (so that they hold on to the leaky bottom of the chair, it can be strengthened with a wooden overlay). Or screw not to the bottom but to the frame of the chair.

By the way, if you don’t have old chairs, it’s NOT a problem. Go to any flea market site - they sell a lot of old chairs for mere pennies. They are happy that they sold it. You are lucky that you found it.

If wooden chairs will have different seat heights, this is easily solved by filing the legs at high chairs(or stuffing additional thick boards on the seat frame of a low chair to raise the seat to the desired height.)

Chairs can be connected not only in the seat area - but also along their backs. Here on step by step master class making such a bench (photo below), we see how it is done:

• The attachment points along the rear line of the seat are a long wooden plank.
• The attachment points along the front line of the seat are a screed with screws (or just a butt, which is held due to the fact that the back bar prevents the chairs from dispersing).

We attach the side rails of the bench. We cut out corner groove on the handrail so that it fits into the frame of the chair back.

We sand the varnish coating from the chairs (we prepare them for painting). We prime before painting - a special primer for wood. We impregnate with a moisture resistant coating.

And attention - we add elements of strength. Bottom and top between the backs of the chairs - we nail short wooden planks-holders. They will unite the backs of the chairs - into a single common back of the country bench.

Cut out the board for the seat. Please note that special square cuts are made in it (so that the high “humps” of the chair legs pass through them.

This is how we get an elegant garden bench. It can be placed on the lawn of the garden in a place with a table - under a canopy, in a recreation area, on a veranda or terrace. And for the winter and rainy season to bring into the house.

And here is the idea of ​​​​how you can arrange chairs DIFFERENTLY under our future bench in the country - WITH A ROUND.

And you can also make a round garden bench around your favorite tree or lilac bush in your country house - also from chairs set in a circle with their backs.

Even if you found only 2 chairs at the flea market, you can still do with them original bench- which will be only for you.

Moreover, one exclusive idea is still hiding here - just for TWO chairs.

Here in the photo below we see how exactly from two old chairs you can make an elegant one with your own hands french bench.

In the photo diagram below, we see a master class - where it is shown how two backs from chairs - become side elements of the garden bench frame.

• First we do quadrangular seat frame(light wood in the photo below) - even scientifically it is called TsARGI (frame elements under the chair seat, or under the tabletop). We nail this frame to the lower bars of the chair back.
• And then, so that our bench does not sway back and forth, we make an additional coupler frame already in the lower part of the legs of the future laochka-goat. Scientifically, such a screed frame at the bottom of the legs is called a PRONG FRAME.
• We paint the whole product white and get a solid French bench for have a nice holiday in the country.

If desired, a backrest can be attached to such a garden goat bench. Just nail to the side surface of the board chair frame. How it is done in the photo below.

Model #2

Country benches

FROM AN OLD BED.

And here are ways to create a beautiful bench for giving using backrests from an old bed.

One back is sawn as is in half. The halves will be used as side elements of the country bench.

Even if the back of your bed is not made of a solid shield, but is decorated with carved balusters, you can still make a bench according to this scheme.

The seat can be covered with a solid wooden shield. Or upholstered with boards-rails as in the photo below.

The second headboard can be used under the FOOT of the bench- from the front edge. How it is done in the photo below. The bottom frame of the bench can simply be paved with an edged planed board and painted. Or you can cut out a solid shield and put it on top of the frame.

You can use only one back to create a bench.

You can make a FRESH FRAME from a cut board for a country bench.

Or the frame for the seat - the frame of the bench - can be taken from the same material as the frame frame of the bed. How it is done in the photo below.

And pay attention. Here, part of the bed frame is PUSHED ON THE TOP - to increase the level of the seat.

A beautiful country bench can be made even using modules from any other furniture. For example from an old buffet. Let's say you have a sideboard, part of which is not subject to restoration (drunk guests fell and broke through the line of drawers).

Then fate itself tells you to make an exclusive bench out of it. Unusual to beat the rest of the buffet. And create cozy corner for family retreat.

And you don't want to put this designer bench out in the rain. You will find her a place of honor in your country house. And sew for her blue pillows with embroidery of snow-white patterns.

Model #3

SHIELD garden benches

OWN HANDS.

To immediately explain the term "panel board" - I will show you such a simple design - a mini-shop from chopping kitchen boards. This is the classic panel structure benches. That is, the product is ASSEMBLED FROM SOLID SHIELDS.

In the photo below, the shields are connected in a groove way. The board-seat rides into the grooves on the legs-racks.

Below, the bench is made EXACTLY THE SAME - using the shield method. Only the material of the shield is more coarse and unhewn. And here they added a back - it was also cut into the grooves cut in the support shields.

• The fastening of the shields to each other can be GROOVE (as in the photo above) - where in one shield grooves are cut, and other shields enter the bottom. Such fasteners are used only in panels made from a SINGLE PIECE of WOOD. Glued boards are not suitable for this - they can delaminate in the places of their gluing.
• Also, for fastening, ADDITIONAL FASTENING ELEMENTS are used - wooden(tsargi, corner braces, prolegs), metal(corners, staples and perforated plates).

Village shops are made using the shield method. 2 side shields (these are legs) - are interconnected by a long board (this is a proleg). The board can be located in the lower part of the midsole, or in the upper part of the midsole - immediately under the seat board. In the photo below we see both of these ways of arranging the proleg under the bench.

As you understand, the shields you work with are not required to have the correct shape. It may be fragments of an old gnawed board - in which you carved flat lines support for SEAT AND BACK REST.

In the photo below, a one-piece shield plays the role of a support for both the seat board and the back board.

Here is the same principle - a solid support for the seat and back of the country bench.

And this beautiful white bench for giving is made according to the same principle. Only already from exactly sawn shields and painted.

Below we see a panel model of a bench with a back, where already 2 shields play the role of a support for the seat and back.

And these supporting SIDE PANELS are made at a slight angle of inclination. And so the bench turned out to be a seat with an inclination inward and a slightly reclined back. It is very comfortable to sit in such a bench.

And agree to do it, it is very easy to cut out such a bench with your own hands. Here the drawing does not have to be exact. Just do it to your liking. Easy sidewall angle choose by eye.

• Side lean back - in the form of a long triangle (choose the angle of inclination yourself).
• Foot support for the seat - in the form of an elongated trapezoid (can be with or without tilt).
• A piece of thick timber is smoothed under the foot supports - so that the bench has a height. But if you have a wide board, then the legs will turn out higher at the bench, then it is possible without beam supports

All parts can be planted on ordinary nails.

To keep the bench from being so low(if you wish) you can make the footboards higher - put together several pieces of timber at once - put them on top of each other with a turret and secure with inside board (to keep everything together) or without a board just on nails.

And also such a bench can be PUT ON LEGS - also in the form of elongated trapeziums. Nazhki are stuffed from the inside of the seat support.

Bench SHIELDING can be KNOWN (that is, not solid, but consist of their boards, closed with each other by a bar-bridge). A simple country bench with a photo below just demonstrates this method.

And this garden bench made of thick boards is also made according to the same principle.

Model No. 4

EDGE BOARD benches

Do it yourself with your own hands.

And here's another simple model country bench. Simplicity is not only in the design, but also in the material. From one long edged board, you can make just such a garden bench quickly and easily with your own hands.

It can be supplemented with armrests, covered with a noble dark stain, or bright rich color paint.

On the sides of a country bench of this type, you can make coasters for books, beer, those things with which you like to relax in the country.

Let's look at the drawing of this country bench. We see that all the corners of the board cuts have a slope of 30 or 60 degrees. The dimensions in the drawing are in inches. One inch equals 2.54 cm.

We see the drawing from the side. The length of the back and seat is up to you.

We cut the board into the segments we need. And we assemble the bench for bolts, screws or nails.

To such a bench in the country, you can make a table for provisions. Or an ordinary shield shop.

Model No. 5

Shield benches for summer cottages

WITH CURVED SIDE SHIELD.

The shields that you cut out for the SIDES of your bench in the country can have SMOOTH ROUND LINES. Then the bench can become a real work of art - your creative work.

The seat in such a bench rests on the PLANKS stuffed under it from the inside of the sidewalls.

The back rests at the bottom - on the same bar as the seat, and at the top on a bar stuffed vertically along the back part of the curved sides.

The boards from which you cut out the curly sidewall can be processed along the edge, giving it roundness and smoothness (left photo below).

And curly sidewalls can be cut not from an ordinary shield, and from carpentry with a relief - the front of the cabinet or an old paneled door. Even the door handle can not be removed - but left for beauty (on the right photo of the bench below).

Model No. 6

Slatted bench for giving

How to do it yourself.

And from the carved sidewalls you can make an interesting RAIL BENCH. They get a round seat with smooth outlines and a curved back line.

In the photo below we see just such a convenient bench for giving.

The curvature of the bench is obtained due to the fact that narrow slats are stuffed AROUND THE FLEXIBLE PERIMETER of the figured side parts.

In the photo below we see a master class for making such a bench for a summer residence. In order for the slats not to bend under the weight of a seated person - for such a bench they make another frame curly element - along the center. All three parts are connected together into one common frame - simply by PUTTING THEM ON THE SLOTS OF THE LOWER RAILS (as in the photo below).

And then on this frame along its upper perimeter - we fill the rails on the screws.

If you want such a bench to be longer, then you just need to make not three curly frame models - but four, or five, or six. And of course, the stuffed slats must also be long.

Model No. 7

Quick bench -

from foam blocks with a cavity.

Foam blocks (or gas silicate blocks) are sometimes made with through holes inside. This is done to save material and also to enhance the heat-shielding properties of such a building material.

And we can use this "leaky" feature of gas silicate blocks - for the good purposes of creating a bench in the country.

To do this, we install 2 two rows of foam blocks with holes DOWN, and put more foam blocks upstairs with holes on the side. And in these holes we insert a beam of a suitable section. To make it more convenient for the pope to sit upstairs, you can foam pillows. It is better to choose those that are lined with waterproof fabric. Or sew it yourself from oilcloth and thick foam rubber (sold in household stores and construction stores).

You can simply hammer it with a sheathing of boards into a solid one - so that a flat seat without holes turns out.

And it’s also good to cover the foam blocks with ordinary paint - to get a bright beautiful bench.

Here are some ideas for making country benches with your own hands. But this is not all the models of wooden benches that I would like to tell you about. Therefore, wait for the continuation - we will make interesting benches from wood (beams, boards and logs).

Your professional growth will not end there...

You will see how easy and fast it is to make a real building with your own hands - a large country gazebo. How to install pillars, how to make a roof yourself (without any building education), how to cover it with a roof (polycarbonate, slate, tiles). Stay with our "Family Bunch" - and we will give you "golden hands".

Good luck with your home building.

Olga Klishevskaya, specially for the site

If a did you like this article
And you want to thank our free author for this painstaking work,
then you can send any amount convenient for you
on the his personal Poison wallet - 410012568032614