home

The easiest way to make a spinner. How to make a do-it-yourself spinner: the easiest way

Spinner, spinner .. Everyone seemed to have gone crazy. What it is? Where did it come from? And most importantly for what? Today we will try to figure it out ... It was invented by one person. Now the whole world is going crazy, people are buying, kids are loving it.

When I was little, I really liked to spin the top. You take out some bigger gear from an old watch and start turning it - who has longer? Familiar? You sit and watch .... Remember your feelings in childhood.

Approximately the same sensations arise when I rotate the spinner. Spin and look. Yes, and a spinner is essentially a spinning top. Only the top is on the axis. A spinner is twisted in a horizontal plane. The Anglo-Saxons like to use the word "spin" (rotate, turn).

They have "spin" everywhere - from quantum mechanics and physics - to this simple thing. Terribly simple. And we have a top, and many other analogies ..

Who rewound the cassette with a pencil, that spinner does not buy!

Time does not stand still. Our children no longer know about all sorts of tape cassettes and spinning tops. Here's a newfangled thing. And there is every reason to think that the spinner will soon turn into an element of style. Maybe soon we will see spinners not only with LEDs, but also gold, with rhinestones, maybe even with diamonds ..

It's such an interesting time right now, you can expect anything. If there is a demand for platinum spinners, I will not be surprised. Online stores are already selling products for 3,000 rubles with might and main ...

Spinner - what is it, what is it for and why is it needed?

Structurally, the spinner is very simple. Imagine a star with a bearing in the center. Star petals are balanced. In each beam, you can also insert a bearing. And twist yourself. Let's add brightness with the help of bright colors and, behold, the spinner is ready.

It is necessary, of course, for entertainment and during idleness. If you are in the "trend", then of course, in order to remain fashionable and stylish. Initially, it was conceived as an anti-stress sedative. Which is true. It can be twisted in different ways - on the table, in the fingers, on one finger ... While it is spinning, you watch how it does it, and at that moment your head becomes completely empty ... And this is rest, friends. Let for a minute, but rest.

All your attention is switched to the spinning petals. Maybe for this reason, in our age of stress, this simple children's toy has become so popular all over the planet ... Who knows? Children are very fond of spinners for their brightness and for this very thing ... Now many sellers are serving this attractive product as a kind of "remedy". Here's what the sellers say:

develops motor skills and increases the sensitivity of the fingers. Particularly useful are products for restoring the working capacity of the hands after various injuries and fractures of the hand;
the device has an anti-stress effect: it helps to concentrate, eliminates excitement, relieves a nervous emotional state and irritability;
the toy will be a great way to take time when traveling in transport or while waiting in a long line;
stimulates the development of manual precision.

So, if you want to relax and get an expensive exclusive product, then go ahead to the online store. I am sure that we are very eagerly awaited there. But Russia is such a unique country. Our man cannot sometimes reconcile himself to go out and buy this simple thing. Our man does it himself.

Because when you have made a Thing yourself (even the simplest one), there is a completely different attitude towards it. It’s always a pity to throw away such a thing, for example ... By the way, when you make something yourself, it also sometimes relaxes and distracts. We will make a spinner with our own hands to be distracted and experiment 🙂

How to make a do-it-yourself spinner from improvised materials?

Materials friends, can be very different. But the principle is the same - in the center is a bearing. In order to ensure long and easy rotation, the toy must be balanced, and the bearing must not contain thick grease. Here is one of the production options:

You need to buy four bearings (three will be as counterweights)

You will need a drill for wood, (perk) with the same diameter as the bearings:

Still - we need the material itself, from which the case is made. He can be anything. The main requirement is strength, and easy processing.

We mark the material with a pencil like this:

We continue to rotate the drill (the same spinner):

Let's make additional holes with a regular drill (for an intricate design):

The workpiece should be drilled like this:

And before fitting the bearings into it, look something like this (if you can work beautifully, you should try to somehow round the corners):

It is necessary to prepare the central bearing, remove the factory grease from it.

After removing the protective covers from the clip, rinse it in gasoline or acetone:

Then you need to use a suitable glue (superglue does not glue all plastic!) Epoxy or another, carefully glue the bearings into place.

Something like this:

Here is such a brutal, "masculine", harsh, spinner turned out.

Watch the video of the production from start to finish:

As you can see, everyone is experimenting as best they can :) :). There is no limit to perfection! There would be a desire. Both samples spin well. More effort goes into good design. Hooray!

How to fix a spinner if it is broken, rusted?

According to my feelings, the purchased spinner cannot be broken. The bearing is pressed into a metal housing; counterweights are glued or pressed. The weakest link is the bearing. It can rust if children drop it and rinse it in water.

It is clear that if the spinner is homemade, as in the example, we simply lubricate and develop the bearing until all the rust comes off. We re-glue the bearings that have flown out with normal glue. In severe cases, we use a rust converter and lubricate until the previous “driving” qualities return. In the case of a purchased spinner, carefully remove the cap or cap, which are always present there:

We apply liquid household lubricant for locks to the clip and so on. If there is a lot of rust, you can throw it into a jar of oil, let it lie down .. That's the whole repair.

Paper origami spinner - without bearings and glue, how to make?

In the wake of the general enthusiasm for the toy, experiments continue. Someone again connected two different directions and they began to make spinners out of paper. By the way, just such crafts develop motor skills and everything else in children.

Therefore, you can captivate your child just by making such original things. From paper, it will be safe for the child. True, a little disposable. Color paper:

Action one:

Action two:

Action three:

Action four, axis:

Action five, the same “bearing” made of paper, which confirms that the Japanese are creative people 🙂

To understand what's what, watch the video.

Beautiful. And it's fun to do those things.

How to make a do-it-yourself spinner from plastic bottle caps

Our people are talented and resourceful. All in the economy! We don't throw anything away! We choose brighter and newer!

Everything is simple, the principle is the same, the material is different.

We do it once:

We do two. It is necessary to drill and clean a hole at the bottom of the cover, and glue:

We glue only three corks, the rest are used to align and symmetrically the first three. It should turn out something like this:

It is necessary to bring everything into a divine form and then begin assembling the product. We also rinse the bearings in acetone and then assemble them.

When everything is inserted, glued, check:

It works.. 🙂 But, friends, this is the easiest way. There are quite exotic but interesting ways to make spinners from plastic corks. Watch the video.

As they say, there would be a desire. It remains to be said that in any creative process there is no limit to perfection. Make a spinner out of wood, metal, cardboard, concrete..

As long as ball bearings are produced, we can do anything. Any creative work gives pleasure to those who do it. Do it with pleasure, and then everything will turn out well for you. See you on the blog pages. If anyone has links to interesting options for a homemade spinner, please leave in the comments.

Matyashchuk Anatoly made a video lesson about a high-quality clear spinner. The master spent a small amount of time to make a nice trinket using carpentry methods from wood.

Sold in this Chinese shop. Plugin for savings in it: 7% from purchases.

In this video you can see how to make a spinner out of wood. You'll need a dagger. A piece of plywood 6 mm thick. If you have a wide wooden plate, even better. A thick pressed cardboard will do. Jigsaw with a small file. Bearings with a diameter of 22 mm. You can get them from roller skates. A small pile of 50 kopeck coins. Nib 20 mm and 22.

First, move the drawing to a piece of wood. Can be glued. Now the workpiece needs to be cut with a jigsaw. Using a 22 mm pen, you need to drill a hole in the center. Also holes for 50 penny coins. Use a round file to bore to fit the bearing dimensions. To make it rotate well, rinse in any solvent. The master used acetone. Gasoline does a great job with this too.

Take 15 coins and glue them with superglue. Each pack contains 5 pieces. Take sandpaper and smooth out the unevenness on the workpiece. Before doing this, remove the bearing so that dust does not accumulate. After sanding one side, sand the other side as well. But before that, remove the paper. The workpiece needs to be painted, for example, with gouache and a brush. After drying, insert the bearing inside.

The wooden spinner already looks pretty cool. But if you want it to spin longer, you need to insert coins. That's all! It can spin up to 1.5 minutes. If you do not like coins, you can not insert.

Another model of a wooden spinner.

Another model.

Hand spinner, literally sounds like a "hand spinner", is a small toy that allows you to relieve stress. Recently, it has become very popular, although many of us used to love to spin the bearings on our fingers.

Plastic variant

original toy

Those who follow the latest trends will be interested in what the Hand Spinner, or just a spinner, came up with in 2015 in America. Since then, this metal, wooden or plastic anti-stress accessory has only been gaining popularity, and now, having conquered Europe, it has also appeared in Russia.

Note! You can order a high-quality stress reliever toy at this link: hand spinner in the store.

Many people like to twist an object in their hands to relieve stress. Most often, they use a pencil, a clicking pen, small expanders, and even a rosary. On the network you can find a huge number of tricks performed with the fingers and these items. So the spinner hand toy aroused extraordinary interest not only among kinesthetics, but also among ordinary people. Although spinner tricks are not very original.

By the way, a hand spinner has a huge number of names, it is called a hand spinner, a stress reliever toy, a finger trainer (finger spinner).

Metal variant

If we consider the design of this device, then it is extremely simple:

Usually it is a flat object, on the body of which there are several recesses for fingers.
The design of the toy involves the presence of a housing in which several bearings are mounted. The central, most important bearing, is responsible for the rotation of the device and the convenience of holding the object, and the bearings at the edges act as counterweights. Depending on the type and quality of the main bearing, models differ in rotation speed, time and number of revolutions.
The central bearing is most often protected by plugs, although there are models with an open rotating part.

Various versions

There are a huge number of varieties of spinners, they can have different sizes, shapes, they are made from various materials (wood, metal, plastic). Especially popular is the luminous spinner, which attracts the eye.

Note that weight plays an important role in the speed and duration of rotation. The fastest spinning toys have minimal edging and lots of holes.

Although the best part is that it is very easy to manage such an anti-stress device, unlike many other similar things, for example, a yoyo toy (yo-yo) is a much more complex device.

Principle of operation

Let's look at how to use the spinner toy, although in fact there are no special secrets here. There are several simple ways to set an object in motion:

To make it rotate, you should take the device by the central part, using your thumb and middle finger, and unwind the side edges with your other hand, and you will see how the improvised wings begin to rotate.
For more advanced users, there is a way to rotate with one hand. To do this, take hold of the central bearing with your thumb and forefinger, and unwind the blades with the middle finger on the same hand.

Color models

At the same time, during the rotation, you will certainly enjoy what is happening in your hands. Well, to make the lesson even more exciting, you can demonstrate some tricks to others. For example, it is very easy to learn how to throw a spinner between the fingers of the hand, while not interfering with the rotation of the system. Great, now we understand how to spin the spinner, it remains to find out why it is needed.

Who will need

It is worth noting that when playing with this simple mechanism, you get a certain pleasure that does not dull even with regular use of the toy. Both adults and children can play with this device, the level of positive emotions does not depend on the life expectancy of a person.

An additional factor that makes clear what the spinner is for is stress relief. Yes, this simple little device helps to cope with the stress that surrounds us all the time.

In addition, the use of such mechanisms is useful for people involved in mental activity. Tactile sensations of the presence of a toy in the hands allow you to switch, change the occupation.

Many people use a spinner while talking on the phone, when they definitely want to turn, twist some object in their hands. It all depends on the habits formed in a person. It will be useful for office workers to stop chewing on pencils, break off and bend the antennae at the caps of pens, unbend paper clips, and switch to rotating a non-standard object.

Varieties

In our age of possibilities, an anti-stress toy can be made from a variety of materials, using a variety of techniques. Many craftsmen even make a spinner with their own hands. Among the worthy options are the following types of spinners:

Original models created on 3D printers. Usually these are plastic copies of mediocre quality, but they are cheap. Naturally, such turntables belong to a cohort of handicraft products that do not reflect the decent quality of production copies, although they are very similar in weight and appearance. You can distinguish such an object from the factory one by the ribbed surface, which is not present in plastic poured into a mold under pressure.
plastic options. Factory plastic finger spinners have a smooth surface, they are pleasant to touch, and their external design is often very, very attractive. High-quality assembly allows them to spin easily and rotate for a long time, while their price is not very high. Sizes and colors should be selected based on the dimensions of your hand and the length of your fingers.

Luminous plastic accessory

metal models. Metal spinners look massive, impressive and serious. It is difficult to define prestige in such toys, but metal models are clearly in the lead here. The heavy and balanced design allows the turntable to spin longer, while the process itself you feel, as well as the mass of your device. A variety of metals are used for the production of toys, here and titanium alloys, and traditional steel, copper, iron, and light aluminum, and even brass. High-quality construction assembly, minimum tolerances, strong materials, all these factors have a beneficial effect on rotation.

Steel variant

wooden options. There are also wooden models of spinners on the market, many of which are unique and inimitable in terms of design. Spinners made of wood have a solid appearance, which once again emphasizes manual production. Unlike plastic options, a wooden device can be safely called environmentally friendly, and it doesn’t even matter what kind of wood it is made of: birch, oak, linden, spruce, whether it is valuable or ordinary wood.

plywood model

It is worth noting that high-quality hand spinners have a good shape for torsion, they are balanced, and their parts are clearly adjusted to each other. Beautiful colors add individuality, but for lovers of exclusivity, craftsmen are always ready to make a device to order. Why are there masters, having a template, diagram or drawing of a spinner, you can try to make such a toy yourself.

Self-manufacturing

Spinner - a toy on a bearing that allows it to rotate for a long time. It is he who is the central link around which the whole system is already being built. The body of the product itself can be made from a variety of materials:

From paper. The simplest option is to make a paper or cardboard spinner. To do this, you need a sharp knife, glue, bearing. Having prepared the drawing, we cut out the body of the future device. In the center, using the same knife or scissors, we make a hole for the bearing. The main thing here is to make the hole slightly smaller than the diameter of the bearing so that it fits there with difficulty. Glue will help to fix the shape more firmly, which can later be painted in the color you like.
From a tree. Making a wooden spinner is much more difficult, here you have to remember all the woodworking skills. The idea of forming a device is very simple. First, we prepare a drawing of the future object, we cut out the workpiece according to it, we grind it. Next, holes are made for the main bearing and secondary ones. When forming holes, it is advisable to drill the wood first and then widen the hole. When the workpiece is sanded, you can cover it with a stain or other similar composition to give the desired color and protect the wood. The last step is to insert the bearings.
From collars. An interesting version of the spinner is obtained from three bearings and 2 clamps. We insert the clamps into each other, and between them we lay the bearings. Tighten the clamps tightly, connecting the three bearings together. To make the connection even stronger, you can coat the joints with glue. We cut off the protruding tails and our home spinner is ready. Such a toy is not the most convenient, because it weighs a little, but it is quite suitable for use.

Craftsmen make such gizmos in a variety of ways, they use welding, assemble from bolts and nuts, and fold from paper. If you turn on the fantasy, it is quite possible to develop an exclusive manufacturing option. If not, now you know how to make a spinner using the above technologies.

If you are reading this article, then most likely you are a happy owner of a spinner, or you plan to become one in the near future, and congratulations on that.

But I'm ready to give a tail to the clipping that you don't know even half of the crazy tricks that you can do with a hand spinner. Over time, it gets boring just to turn the bearing on your finger, I want to add drive.

In skillful hands legs, head and other parts of the body) the turntable turns into a circus prop, and you yourself become a real artist, even if not yet recognized.

First, you will have to make some effort and be patient. The first time ( and sometimes even from a hundred) few people manage to turn the trick to the end and without errors.

Secondly, you need to have a good turntable. Cheap Chinese self-propelled guns are suitable only for rotation on a finger. There are also good spinners in China, but they usually cost more than 50-100 rubles.

Where to start learning?

Secondly, it is worth finding out what spinner tricks are in general:

Throwing a spinning turntable from one hand to the other.
Throwing under arms and legs.
Throwing up with subsequent landing on some part of the body or surface (for example, the visor of a cap).
Knocking a spinner with a knee, leg, elbow, etc.
Fingering or tossing the spinner alternately with your fingers.
Using improvised items on which the spinner will rotate, such as pens, keys, mobile phones, etc.
And many many others.

The most important rule in the vast majority of such tricks is the spinner must not interrupt the rotation! Otherwise, the focus failed, because you touched the blades.

To better understand what I'm talking about, you can watch this video with tricks:

Already full of enthusiasm and ready to rush into battle? Then go ahead!

Spinner tricks for beginners

Here are some tips for complete beginners who are just getting to know their toy:

Do not rush! The main thing here is not speed, but concentration. The calmer you are, the more likely you are to perform the movement correctly.
Start with simple movements. You should not immediately swing at steep throws behind your back from under your feet, with your eyes closed and standing on your head 🙂
Practice every day. It is necessary to develop fine motor skills and body coordination, and without regular training this cannot be achieved.
Choose classic spinner options for exercise, without unnecessary whistles and fakes that can get in the way.
The turntable must be of high quality, have a perfect balance. It is best to take with a ceramic bearing, it spins longer and weighs less.

Watch this video, it explains well and in detail how to do spinner tricks for a beginner

Cool spinner tricks for advanced

If ordinary tricks are already too boring for you, and you want some kind of exotic, then try adding extraneous objects or new people to the action.

You can toss the spinner with your friend using basic moves, but with two people.

And you can do for example like these guys, shooting from a bow and aiming ... a sword ... throwing darts at a spinning spinner:

Still easy? Then connect your pets to spinning. The main thing is not to pester wild animals, they may not appreciate

What other tricks can be done with a spinner? Yes, what will come to mind that only people have not come up with already, and I'm sure they will come up with even more. For starters, another video selection with 50 interesting tricks:

And what original movements and chips with a spinner can you do?

Manufacturing

Making my spinner is very easy. This is an experimental model and there are no exact dimensions, everything was done by eye. Yes, and the bearing in the original should be ceramic.

For credit cards, we find the center and drill a hole with a diameter of 18 mm. We saw off the heads of the bolts (they will create the necessary moment of inertia with their own weight), and we make a hairpin from a 4mm bolt. Remove the boot from the bearing. On the sandwich panel, trace the outline of the card and drill three holes, as in the photo. We place the bolt heads in the holes along the edges, and the bearing in the central hole. We close the top and bottom with plastic cards and use double-sided tape to glue the resulting sandwich. We cut out our product with a knife. We glue the edges with a carbon film for the car. We insert a stud with a silicone sleeve into the bearing and tighten it with nuts. It turned out a spinner with the name and surname of the owner.

For a successful start of operation, you just need to hold the middle bearing between your thumb and forefinger and twist it with your middle finger or second hand.

It turned out to be an original trinket. If neither you nor your friends have ever seen anything like this before, then I advise you to watch a video with this little thing on the Internet. It will grab your attention and maybe you want to make your own SPINNER!

Do you want to buy a spinner, but it is not for sale in your city? We will tell you how to make a do-it-yourself spinner without a bearing! Recently, an unusually large number of newfangled toys began to appear. They are great for kids and adults alike, but sometimes finding a store that can sell you this new-fangled accessory is very difficult. Let's talk about spinners.

This toy entered the trend relatively recently and just flooded the Internet. It is impossible to buy it in some cities, as there are no retail stores, so you have to order it via the Internet.

But why spend money when you can do it yourself? Many are wondering how to make a spinner without using a bearing, today we will help you with this.

What is a spinner

The word "spin" is translated from English as "rotation". By and large, the toy is a rotating body that moves around its axis when energy is imparted to it. You can get a spinner without bearings, but it will not have the required rotation speed.

A standard spinner consists of three petals, in the center of each there is a bearing. It is worth noting that the mass of each petal must be the same, as well as the shape, otherwise there will be no balance and rotation will stop very quickly.

What's the catch?

In our free time, in anticipation of something, when we think, we always take something in our hands in order to somehow entertain or calm ourselves. For this you need ... a spinner. Of course, it cannot be called a child's toy, as it is an accessory for psychological and emotional relief.

How to make a do-it-yourself spinner

First, we will consider the main master classes, and later in the article we have prepared for you a simple instruction for making a spinner without a bearing!

Making such a toy is quite simple, you just need to thoroughly study the design and details of the spinner:

a housing that includes a bearing and a plug;
petals, in which bearings are also built;
additional plugs.

The most important part of the toy is the bearings, it is on them that the efficiency of rotation, the number of revolutions and much more depends. Plugs are needed to hide the working mechanism of the bearing and conveniently hold the spinner itself. The parts are very simple and easily made using improvised means.

Manufacturing process

First, consider the model with bearings. For this we need:

cardboard
4 bearings
knife or scissors

First, we draw a drawing of the future model of your spinner.
We put the sketch on the cardboard and carefully cut along the edges.
It is necessary to clearly highlight and mark the places for the bearings, for this, use a compass.
Each petal should be symmetrical to the other.
We cut out the holes for the moving elements with scissors and smooth them a little with sandpaper.
They must be made in such a way that the bearing fits snugly into the hole.

Next, insert the bearings into the holes obtained and fill the edges with plenty of glue. In this case, it is best to use construction glue, which is used for gluing various decorated parts.

It must be applied carefully so that nothing gets into the bearing.

There is one well-known method, which will be discussed further.

wooden spinner

Making a wooden spinner is a more complicated option, but it is also the most reliable. Using a jigsaw and a special construction tool, you can make a housing into which, by analogy, you insert bearings and fix with glue. In each case, you can paint your spinner in the appropriate color.

First, we select wood. It is best to use plywood, as it is the easiest to process. A sketch of the case can be found on the Internet, after which we transfer it to the workpiece. Using a jigsaw, we cut out the body.
Next, you need to sand everything.
Drill holes for bearings
The thickness of the plywood must match the thickness of the bearing, otherwise nothing will work.

Spinner without bearings

Many people are wondering how to make a do-it-yourself spinner without a bearing and at minimal cost. The most common option will be presented next. The easiest and fastest way to make a spinner is from plastic bottle caps. This is a very simple way that no one knows about (except you).

For this we need:

three bottle caps of the same size and weight;
drill with a drill;
ball pen;
glue.

You need to do everything in a certain sequence:

We glue the sides of the three covers. It turns out some kind of spinner without bearings.
Next, in the central cover, we make a hole for the core of a ballpoint pen. In this case, the diameter of the drill and the rod must be the same.
We cut off a few centimeters from the rod and insert it into the resulting hole.

In such an easy way, a spinner is made with your own hands, which can be rotated as much as you like without a bearing.

Making such a toy is very simple if you know or at least have an idea how the spinner works. In any case, you can always replace the covers with any other parts of the same shape and size. Everything is very simple.

Harm from using this accessory

Having figured out how to make a do-it-yourself spinner without a bearing, you can talk about the negative consequences of using it. You must strictly follow the safety precautions so as not to cause yourself any harm.

A factory-made spinner is completely safe, but the one you make yourself is not always. It is necessary to carefully process the surfaces, securely fasten the bearings and use it only for its intended purpose.

Do not leave children unsupervised!

Reading time ≈ 6 minutes

More recently, the market of modern youth gadgets was blown up by an anti-stress toy called a spinner. Despite the large assortment of goods offered on store shelves and online resources, the option to create a do-it-yourself spinner looks very attractive, since it will not only save on the product, but also get the desired spinner according to your ideas and imagination. There are many options for making a do-it-yourself spinner at home, consider the most popular of them.

What is a spinner?

The original name of the toy - fidget spinner comes from the English word spinner, which means rotation or torsion. It consists of one or several bearings, which, by their rotation, help not only pass the time, but also improve finger motility, dexterity and attentiveness. Spinner analogues can be called the good old yo-yo, which at the beginning of the 2000s could be found in the hands of everyone. Now, one of the most popular places among fashion trends is occupied by spinners, according to the dexterity of handling which even various championships are already held.

What is a spinner for?

The original purpose of the spinner is a toy for young people, a trinket that helps pass the time, but this spinner eventually turned into something more. As practice shows, the spinner is an excellent assistant in the fight against bad habits. This applies to quitting smoking, snapping fingers and many other unpleasant moments associated with the fact that a person needs to urgently occupy his hands with some business. As a result, spinner spinning has become a real hobby for many people who not only master the skill of spinning toys, but also compete in this aspect with each other.

How the toy works

The main task of this product is its rotation, which should be continuous and occur without much effort. The basis that betrays the rotational movement of the toy is the bearing, which is located in the center. In order for the spinner to spin for a long time and beautifully, it must have the correct shape and reinforcing weight. Typically, three weights are used, evenly spaced from the center, however, spinners can often be found with two or four weights. It is IMPORTANT to note that spinners do not require accumulators and batteries for spinning. If the toy is made in the right way, a light flick of the finger can make it rotate around its central axis. The most important thing in the normal operation of the spinner is the observance of symmetry, because even a slight deviation in the dimensions of the sides with weights will lead to poor and unstable rotation.

How to make a do-it-yourself spinner?

The manufacture of this twister is not a complex technological process that requires special knowledge and tools. The main material is one or more bearings, and there are a lot of options for making the base. The main nuance of this process is the weighting of the edges of the spinner, because otherwise it will not rotate well. Coins, nuts or other bearings are perfect for weighting. An IMPORTANT detail for hand spinners is bearing lubrication, which allows you to increase the rotation speed of the toy several times. It is recommended to lubricate with oils intended for motorcycle chains. If this is not at hand, you can use WD-40.

Wooden spinner

In order to decide on the question of how to make a spinner with your own hands, you first need to decide on the base material. Cool spinners are obtained from a wooden base, which, with proper and high-quality processing, is not much different from factory counterparts. First you need to create a drawing of the future product. It is based on the diameter of the bearing and three weighting agents, starting from these figures in the future. After transferring the sketch from paper to a wooden blank, you need to cut out the future spinner with a jigsaw.

Holes for metal parts are drilled on a special machine or with a pen drill. For ease of use, the workpiece must be carefully sanded and polished. Reliability of the finished toy will be betrayed by fixing metal parts to the base with epoxy or any other glue. In order to make it convenient to spin the spinner on a finger or any other surface, it is recommended to apply decorative overlays to the rotating part of the bearing. From improvised materials, two ordinary buttons of the appropriate size are perfect for this role.

Spinner with 4 bearings

An attractive manufacturing option is to create a do-it-yourself spinner from bearings. Firstly, this method does not require various foreign materials, except for glue and four bearings, one of which will play the role of the central axis, and the other three - weighting agents. Secondly, this method does not require a lot of time, allowing you to get a spinner in 5 minutes of work.

The only difficulty of the process is the poor adhesion of metal parts to each other. For reliable fixation, additional heat treatment will be required, which is often difficult to provide at home. After gluing, excess glue should be removed with a file or needle file, thereby removing all rough surfaces.

Handmade hot glue spinner

Hot glue is a great base for a homemade spinner. For manufacturing, you will need a set of weighting agents, a bearing, hot glue and a base that acts as a flask (usually made of thick paper or cardboard according to the drawing).

An important point is the installation of metal parts strictly in the center of their area. Then glue is poured into the mold and waits for complete solidification there. After hardening, the paper contour is removed and the spinner is polished to a completely smooth surface.

Epoxy glue toy

To make a homemade spinner, you can use not only hot glue, but also epoxy in the hardened floor. Glue in the form of plasticine not only connects the bearing and weighting agents together, but is also the basis for torque.

In this manufacturing process, it is important to correctly position the metal parts, for this it is better to use a pre-marked wooden board with drilled holes and inserted clamps. It is better to remove the main excess glue before it hardens completely, then polishing only small roughnesses.

The simplest and most budgetary option for making a spinner yourself is to work with plastic clamps that are designed to tighten cables. For ease of use, it is recommended to use metal weights of the same diameter as the bearing. Weights are laid out at three corners of an equilateral triangle, as shown in the photo. Around them, a base is created from three screeds closed to each other. Then, each of the weighting agents is also attached to the base with a plastic clamp.

After that, an axial bearing is installed in the middle and a uniform tightening of the clamps begins from the side of each weighting agent. For reliable fixation, the resulting structure is pulled together with three more clamps, from the center to each side of the weighting loads. This manufacturing method, although it is the most inexpensive and fastest, however, the appearance of the finished product is significantly inferior to analogues from other materials.

MDF spinner

Making spinners from medium density fibreboard is very similar in principle to working with a blank of wood. At the beginning of the process, markings are applied on a small MDF sheet, taking into account the placement of metal parts and the overall size of the spinner. Then holes are drilled for the central bearing and weighting elements and a size is adjusted that is close to the final one.

It is worth noting that when processing and drilling an MDF sheet, you need to be more careful and accurate than when working with wood, since this material is fragile and brittle. To give an aesthetic appearance to the finished product, it is recommended to paint it, while before painting the spinner must first be sanded and degreased.

Spinner is a very popular thing among teenagers and adults. It helps to concentrate thoughts, relax, relieve psychological stress. You can buy a spinner in almost any store, but it is much more interesting to make it yourself. Below you will find instructions for assembling different do-it-yourself spinners.

How to make a do-it-yourself spinner - a simple spinner

In order to make a simple one with your own hands, you will need the following materials:

5-6 bearings.
Ties.

We lay out the bearings in length, tightly pressing against each other.
We connect 3 ties in the shape of a triangle.
We dress the figure obtained from the screeds on the bearings.
Tighten the bearing on one side so that they tightly fit the bearings. Trim the protruding tails. The resulting design should look like caterpillars.
We take 2 more ties, tighten them vertically, along the edges of the second bearing. Trim the protruding tails.

Spinner is ready.

How to make a do-it-yourself spinner - star spinner

In order to make a spinner star with your own hands, you will need the following materials:

4 bearings.
Super glue.
Threads.
Sandpaper.
Soda.

We perform the following simple steps:

We lay out the bearings as follows: two bearings are vertically tightly pressed against each other, the other two are on the sides of the second vertical one.

We clean the spinners with sandpaper in the place where we will glue.
We glue the spinners in the form that was originally set, sprinkle the gluing places with soda for greater strength.

We wind the joints of the bearings with threads.

We also put super glue on the threads so that they do not unwind.
Spinner is ready.

How to make a do-it-yourself wooden spinner

In order to make a wooden spinner with your own hands, you will need the following materials:

A piece of wood.
Drill.
3 bearings.
Sandpaper.
Pencil.
Saw.