PVC bath screen. Brickwork for the screen

Modern acrylic bathtubs and trays are often equipped with special aprons that hide the hard-hitting metal support structures and cover the empty space under the bowl. Concerning conventional baths, then often they are sold without such devices and, unless the plumbing is not designer and does not have decorative legs, then the appearance of the bowl leaves much to be desired. Attractive bath screens can correct the situation. What you need to know when choosing finished panel and how to assemble the structure yourself - read below.

A bath screen is a kind of apron, the main components of which are a frame made of steel or aluminum and waterproof panels. Behind such panels, you can easily hide household chemicals, personal hygiene products (this issue is especially acute in small rooms, the space of which does not allow many modules to be placed). Often, an acrylic bathtub is sold complete with a screen. Otherwise, the panel can be purchased separately or made independently.

Folding bath screens look stylish and modern, which, as a rule, are equipped with shelves for placing detergents. The disadvantage of such designs is that they require free space next to the bathroom.

Today, there are such types of screens: hinged, sliding, stationary. Designs are selected depending on the shape of the bath. So, for plumbing, which is close to the walls, a front screen is suitable, and for a curly structure or a bathtub with one open side, a corner acrylic shield. Often, screens are made with internal shelves and a retractable storage system.

Choosing bath doors

A popular option that allows you to effectively hide household chemicals and close the space under the bathroom are hinged doors: they make it possible to quickly and easily get the necessary detergents, tools and any other household equipment, while looking attractive and stylish.

When choosing doors for a bath, you must adhere to the following recommendations:

1. Doors must be made of moisture-resistant material (for example, PVC, plexiglass). If the screen trim is made of wood, then the wood must be marine (moisture resistant). Suitable teak, wenge, larch.
2. Handles should be comfortable, made of stainless steel or plastic. The same goes for hinges and fasteners.
3. Products should be selected according to the interior of the bathroom. This applies to both colors and materials. For example, for modern bathrooms perfect choice will become mirror screens, for rustic interiors- panels made of wooden planks.
4. If the bathroom already has furniture (hanging cabinets, cabinets under the sink), then it is better that the doors are the same as those of the fittings or as similar as possible.

When choosing products, it should be borne in mind that the doors can be installed under bathtubs, next to which there are no other plumbing fixtures and Appliances, since nothing should interfere with the opening of the doors.

MDF bath screen: pros and cons

Bath doors can be made from almost any material. The main requirement is that it must be moisture resistant. At the same time, it is desirable that the surface of the panels be smooth: thus, dirt can be easily and quickly removed from it. One of popular materials for the manufacture of screens is MDF.

Wood fiber board has the following advantages:

1. Environmental friendliness. Today, MDF boards are made by pressing without the use of binding fibers, so the material is absolutely safe for humans and the environment.
2. Availability. Compared to plexiglass, MDF is much cheaper.
3. Attractive appearance. Outwardly, the material resembles wood, which makes the interior cozy and remains relevant regardless of fashion trends.
4. High density. This makes MDF resistant to hot steam and moisture.
5. Wide range of design possibilities. Fiberboard panels can be made in any style and color.

The disadvantages of the material include its fire hazard: MDF boards are not recommended to be placed next to flammable objects, wiring. Also, MDF does not differ in one hundred percent moisture resistance: with extensive accumulation of moisture on the surface of the material, even installed on the frame, it is well fixed MDF board begins to roll under the weight of its own weight and deform.

Sliding bath panel

A sliding panel for a bathtub is a design that consists of a solid frame with guides or roller mechanism and mobile doors. Panel shutters work on the principle of sliding doors, allowing you to quickly get what you need and get to communications.

Sliding screens can have two or three doors (depending on the length of the bathroom), be decorated with photo printing, mirrors, frosted glass. Some firms offer the production of panels to order: a beautiful screen will be an effective addition to the design of the room, emphasize the style of the interior.

Sliding bath doors are ideal for small bathrooms. sanitary facilities as they do not take up much space during operation.

The most affordable sliding panels for a bath are plastic. Plexiglas panels are considered the highest quality sliding screens: Plexiglas screens are 100% moisture resistant, have a smooth ride, and are made of quality materials, can be made in various colors, have a mirror surface.

How to make a sliding screen under the bath with your own hands

The easiest way to install a sliding screen with your own hands is to buy ready kit doors. If there is no opportunity to purchase a set, then you can make the panels yourself. Most often, in order to make a homemade screen, plastic, aluminum profiles, corners and fasteners are used.

The process of installing a sliding panel involves:

1. Drawing markings for the frame. The marking depends on the height and length of the bathtub, and is carried out using the building level. The starting point, in this case, is the side of the bath.
2. Frame installation. Aluminum profiles are connected in parallel with corners.
3. Installation of guides to the upper and lower frame.
4. Cutting plastic and installing sheets in the grooves of the guides.

The valve can consist of two or more elements. For convenience, metal or plastic handles are attached to the panels.

We make a monolithic plasterboard bath screen

The simplest for self-production is a stationary bath screen, the main function of which is decorative (the panel will hide the space under the bathroom, but it will be impossible to store household chemicals behind it). To carry out the work you will need: drywall, guides with a supporting profile, material for exterior decoration.

To make a monolithic screen you need:

1. Make a markup for a profile for drywall. The top edge of the bathroom is taken as the starting point for marking. At the same time, during work it is necessary to use the building level.
2. Install a frame from a metal profile (most often use a UD profile). For rigidity, not only the frame, but also the guides should be mounted.
3. Cut the sheet to size and sheathe the frame. If the screen will be crossed by pipes, but in the material it is necessary to cut special holes for communications.
4. Putty joints between sheets of drywall (if any).
5. Trim drywall. The wired material can be decorated with tiles, tiles, wooden moisture-resistant panels, plastic.

In the same way, you can make a screen with a door. To do this, you will need to purchase an inspection hatch at a hardware store and cut a hole in the drywall sheet for its installation.

How to make a bath screen (video)

The modern production of bath screens offers a wide range of products, different in appearance, design, material of manufacture. Today, everyone can choose a panel depending on their own preferences, parameters and design of the bathroom, the shape of plumbing. In addition, you can easily make panels for the bath with your own hands. Mount attractive and practical screens and enjoy the functionality and attractive view own bath!

A sliding bath screen is a design that includes two or more doors and a guide frame. Installing such a screen allows you to decorate plumbing fixtures, as well as save bathroom space and maintain access to pipes in case of breakage. The last point is very important for apartments that are small in size.

Consider the main advantages of using sliding screens on the bath:

• installation of this design is quite simple. It can be carried out by any person who does not have special building skills and knowledge;

• acceptable cost. To date, such screens are made from different materials, so everyone can choose for themselves a product in the desired price range;
• simple and convenient dismantling if necessary (for example, when replacing communications under the bathroom);
• a wide range of models that differ not only in color, but also in design.

Note! Doors that slide to the side when opened save valuable room space, which is a definite plus for small apartments.

Of the shortcomings of the sliding model, only one can be noted, related to plastic products - the weak resistance of the guides. Plastic guides tend to deform after 2-4 years of use, which makes it difficult to move the valves.

Sliding Screen Design

The frame material of sliding structures may vary, depending on the price. Today you can find frames made of plastic or aluminum. The most expensive options are equipped with a roller mechanism. Plastic options are the least expensive, and also resistant to moisture. The main disadvantage of polymer frames is weak strength. Aluminum frames, unlike plastic ones, are more durable, however, less resistant to moisture.

A variety of color solutions is inherent in both the first and second frame options. But the paint applied to the aluminum parts of the structure tends to peel off and peel off over time.
The roller sliding design used for the bath panels is most reminiscent of the one used in wardrobes. The rollers are fixed on the panel and when the sash is opened, they pass along the guides. Such panels are convenient and aesthetic, but also more expensive than simple models.

Some screen options are equipped with shelves that are used for storage household chemicals and various other accessories. Structural solution this type greatly increases functionality bathroom, especially small ones. The cost of screens for a bathtub with shelves corresponds to their functionality.

Sliding bath screen: components and main design functions

Sliding type screens often include the following: structural elements:

• panels or sashes, the frame of which is made of plastic, aluminum, as well as other metals;
• accessories;
• installation instructions.

Helpful information! Sometimes sliding screens are decorated with various materials. The most common element of decor in this case is a mirror. The use of a mirror has several disadvantages, including: difficult maintenance and very weak strength (the mirror surface often breaks).

The simplicity of design and practicality of such models do not affect their functionality in any way. Consider their main functions:

• protection of communications from water ingress;
• hiding communications and other items (plunger, household chemicals) that look inorganic in the interior of the bathroom;
• decorative.

Buy sliding screen under the bath can be in any building hypermarket, as well as in the market. A variety of models allows you to choose the right option for any interior.

Varieties of sliding screens under the bath: 150 cm and 170 cm

These products are available in a small range of sizes. The dimensions of the sliding screens are selected depending on the size of the room and, directly, the bath. There are two variants of standard sliding models along the length.

The minimum number of flaps in a sliding screen for a 150 cm bath is two, and the maximum is four, however, there are exceptions. The height of the screens under the bath ranges from 506 to 560 millimeters. If necessary, you can independently adjust this indicator. Height adjustment is quite simple - with the help of legs.

Sliding bath screens 170 cm

Models that have this length are the most common. Sliding screens for a 170 cm bath include from 2 to 4 flaps, which are moved away due to a mechanism similar to that of a wardrobe. The height of this design varies from 506 to 560 mm. You can buy a sliding screen for a bathtub 170 cm in any specialized supermarket or store.

You can purchase products of longer length, for example, 180 cm bath screens. If you start from design options of these products, there are 4 main varieties:

• simple ( plastic sashes and aluminum frame)
• multifunctional (the possibility of size regulation is added to the previous features);
• products that are produced without frames;
• products that obscure the end of the bathroom bowl.

Thanks to a simple design, you can independently make a sliding screen for the bath. Photos and prices of such products can be viewed in the manufacturers' catalogs, where you can see the use of these designs in real interiors.

Plastic bath screens

Models made from this material, as mentioned above, are considered the most common. They are widely used due to their reasonable cost, as well as other positive qualities, among which:

• resistance to fungal formations and mold;
• resistance to temperature changes;
• decay resistance.

The water resistance of plastic material is a huge advantage that determines its prevalence. Constant humidity in the bathroom negatively affects products made of chipboard or MDF. Over time, they become completely unusable and require replacement. In turn, plastic does not swell from moisture, and it is also not afraid of rotting. Today on construction market you can find products of different lengths - from 120 to 180 cm and above. Sliding bath screens 150 cm - easy to install, as their length is standard. The same applies to sliding screens under the bath 170 cm.

Note! Polymer shutters do not require individual care - just wipe them with a regular cloth. Drops and stains on polymer material not as noticeable as, for example, on a mirror surface, which is also a plus.

Screens for acrylic bathtubs

Acrylic sliding panels often come with a bathtub that is made from the same material. They differ in originality of execution and consist, as a rule, of a solid panel. They can be purchased separately, however, do not forget that they are only suitable for acrylic bathtubs due to the nature of the attachment.

Installing an acrylic screen has some features that you need to pay attention to.

Consider how to install bath screens made of this material:

• first of all, you need to find the center of the screen panel and mark it with a marker;
• further, it is necessary to bring part of the panel over the rim of the bathroom bowl;
• at this stage, the panel is applied to the bath;
• the place of fixation is marked, which must coincide with the first mark;
• studs are screwed;
• by means of nuts, the corner is fixed, which is needed to fasten the panel;
• holes are made in marked places (with a drill);
• the design is fixed with self-tapping screws, which are masked with the help of plugs.

Acrylic construction is strong and durable. Subject to assembly rules it won't last one year.

Features of sliding MDF panels

MDF is a material that is made by pressing wood chips. Given the humidity of the bathroom, MDF screens are made using moisture-resistant impregnation. Special resins act as such impregnation.

Related article:

How to choose the right size for your bathroom. Popular manufacturers and models of bathtubs. Price policy.

The main advantages of moisture-resistant MDF structures are practicality and a rather long service life. Like polymer counterparts, these products are distinguished by a wide range of colors. As a decor, various drawings and patterns are applied to them. To enhance the moisture-resistant qualities, the surface of the MDF board is laminated with plastic films.

A plate made of this material has a rather large mass, so the guides for it are made of durable metals. From screens made of other materials, MDF construction differs in that it often consists of 3 valves. Moreover, the middle sash is fixed, and the side doors open like in wardrobes. The most common sizes of MDF screens for a bath: 150, 160, 170, 180 cm.

Sliding glass and mirror screen models: we increase the bathroom space

Such designs are used much less frequently than plastic ones. This is due to the fact that they have a very weak resistance to mechanical stress. However, they differ high quality, presentability, as well as resistance to moisture.

The dimensions of such panels correspond to products made of other materials. The easiest way is to buy 150 cm sliding bath screens. However, 180 cm glass bath screens are sometimes quite difficult to find. In this case, many companies are engaged in the production of individual panels to order.

Helpful advice! For people whose motor abilities are limited, there are models of sliding panels equipped with special handrails.

The glass of such a panel can be transparent or colored. In turn, the structure can be both glossy and matte. And also glass sliding models can be made with a variety of patterns, patterns. The backlight for such a screen looks very impressive.

The demand for products, the outer surface of which is represented by a mirror, is quite stable. Such an element as a mirror fits perfectly into the interior of the bathroom and allows you to visually expand its space. As well as the mirrored surface of the panel under the bathroom allows you to add a play of light to the room.

Mirror elements can be installed at different angles, as well as add artificial lighting. The finished design looks very original and presentable. Of the minuses of this option, one can note: the fragility of the panel, the difficulties associated with caring for the mirror surface.

Sliding Screen Design Options

The external design of panels of this type can be very different. For example, models that are equipped with photo printing are very popular. Photo printing can be of two types: regular (2D) and volumetric (3D). The latter option creates the effect of the depth of space, which looks very stylish and original.

For rooms decorated in a minimalist style, it is recommended to select monochromatic options. The structure of the outer surface of monophonic models can be either glossy or matte.

Not only the panels of these products have decoration. The legs, which perform the function of support, also differ in abundance. design solutions. Expensive designs are equipped with antique-style legs. The shape of these elements can be very different - from simple geometric shapes, to the paws of animals.

How to choose a sliding bath screen?

Before you buy a sliding type bath screen, you need to consider three main points in advance, such as:

• the size;
• material;
• design.

The above parameters determine the complexity of installation, ease of use and the operational life of the structure. As mentioned above, the most common sizes of bath screens are 150 and 170 cm. The material and design are selected individually, depending on the preferences of the owners and the characteristics of a particular room.

In the case of purchasing an acrylic bath, which has custom sizes, it is recommended to pre-order a custom screen. Otherwise, it is unlikely that you will be able to select the desired option. To save money, you can purchase a deaf type product. This model is less functional, however, suitable for protecting communications.

Helpful advice! To expand the functionality, they often buy folding screens under the bath. Such screens in most cases are equipped with special shelves. However, it is necessary to take into account the useful area of ​​\u200b\u200bthe room, since the folding model is not the best choice for a standard, small-sized bathroom.

A panel frame made of aluminum is the most suitable option. Experts recommend using plastic frames only if the panel sashes are also made of this material, otherwise the frame may not withstand the load).

For small bathrooms, only a sliding design model is suitable. When buying such a screen, you need to pay attention to the following factors:

• serviceability of the roller mechanism;
• the quality of the guide elements;
• convenience of regulation of legs of a product on height.

The price of bath screens can be found on the Internet on sites that sell these products. As a rule, in order to buy sliding screens for a 170 cm bath, you need to spend from 2 to 5 thousand rubles.

How to install a screen under a sliding type bath?

The process of installing a plastic panel for this type of bath does not require special building skills. In order to perform the installation of this design, you must carefully study the instructions below.

Mounting algorithm plastic screen looks like this:

• first you need to find the middle of the panel. To do this, it is enough to use the usual construction tape measure;
• further, it is necessary to determine the point that will correspond to the center of the bathtub rim;
• midpoints are marked with a marker or pencil;
• at this stage upper part panels need to be brought over the side. In order to perform this manipulation, you will need to place the product next to the bathtub and tilt it at an angle of 30–40 °;
• after that, it is necessary to determine the optimal position of the panel and make the appropriate markings on the wall;
• further, reinforcing structural elements are fixed, which are often used as corners. Fixation is carried out along the marked lines with a drill and dowel-nails. For screens with a length of 150 cm, it is enough to make a reinforcing frame around the perimeter. Bath screens 170 cm require more serious reinforcement, namely 1-2 intermediate racks. Sliding screens for a 180 cm bath also require the installation of intermediate racks;
• making a frame for the panel yourself is quite simple: you need to take measurements and cut the strips of the appropriate length from a metal profile. Docking of elements is carried out by means of self-tapping screws or corners;
• we put the panel in such a way that it is located close to the frame or metal corners and unscrew the legs (for fixing);
• at this stage, the panel frame is fixed to the frame or metal corners. Decorative elements are used for fixing;
• at the end of the gap between the side of the bathtub and the frame of the screen, they are filled with a special sealing compound to prevent moisture from entering the structure.

Helpful advice! For convenience during operation sliding system it is recommended to glue handles to its wings.

Easiest to shield cast iron bathtubs. In this case, it is enough to fix sliding structure with the help of legs (you should be careful when fixing the legs of the sliding screen under the bathtub 180 cm). And when shielding an acrylic bath, you should be careful, as there is a danger of it rising when unscrewing the legs. This is due to the fact that an acrylic bowl weighs much less than a cast iron one.

Making a sliding screen for a bath with your own hands

Self-manufacturing of a sliding panel - simple process. If necessary, you can make a solid screen of plasterboard or MDF. The above materials must be selected, focusing on their moisture resistance. After installing a sheet of one or another material, the screen is faced ceramic tiles. To access the pipes in such a screen, a viewing window (hatch) is made.

It is somewhat more difficult to make a sliding model, however, if you follow the algorithm of actions, then there should not be any problems with the installation of such a design. Below we will look at how to make a sliding screen using an E-shaped profile, as well as the materials that will be required for this.

Consider what materials you need to prepare for making a do-it-yourself sliding screen for a bath:

• w-shaped profile. The profile material is selected depending on the damper material. The most commonly used profiles are aluminum or plastic. The width of such a profile should be no less than 20 mm and no more than 24 mm;
• rack tubes. Experts recommend using steel tubes. The cross section of the tubes should be approximately 10 mm.

First you need to thread the ends of the tubes. The screen is fixed by means of special fasteners. Sliding doors are recommended to be made of cheap and easy-to-handle plastic material. Getting plastic sashes is quite simple: you need to cut the polymer panel into pieces. In order not to be mistaken in size, it is recommended to take all measurements in advance and perform the appropriate markup. Then, the resulting parts must be glued together. For this, transparent glue is best suited.

The algorithm of work is as follows:

1. First, measurements are taken and the drilling sites are marked.
2. With the help of the level, the points are marked at which the fixing elements will be located.
3. For guides (upper and lower), it is necessary to measure, corresponding in length, segments of the w-shaped metal profile.
4. The panel is cut into pieces. Thus, sashes are obtained required size.
5. Screen assembly.
6. Installation of the structure using spacer racks.

Note! The screen, made on the basis of the W-shaped profile, has some disadvantages. The main disadvantage of this design is the poor resistance of the profile to moisture.

Screen design is a matter of taste. If desired, you can make sashes of plastic of different colors, glue handles for convenience, equip the structure with shelves for household chemicals.

Features of installing a screen under the bath: video

has become beautiful and stylish, you need to take care of all the little things that can disrupt harmony. First of all, this concernsspaces under the bath, which often spoils all the carefully thought out design. Open pipes look unaesthetic, and a rag and a floor bucket distract from contemplation cozy interior. So how can you get rid of ugly species andennoble the room? This will help youbath screen. It perfectly hides the free space and gives the composition a completeness and a concise look.

Of course, you can buy a screen in a store (sometimes it even comes with a bathroom) or contact specialists. But there is nothing difficult in doing this work yourself.

How to make a screen under the bath with your own hands?

To begin with, you should decide which type of screen suits your requirement. There are only two of them: sliding and continuous. The latter requires less effort and materials, it looks great, but has certain limitations.

• The solid screen does not allow you to store various cleaning supplies in the space under the bath, as well as chemicals(cleaners, washing powders, etc.).
• solid screen leaves no access to pipes. As a result of a leak or the need to replace the pipe, you will have to disassemble the screen, do all the work, and then reassemble it. However, craftsmen offer a great way to get rid of this drawback - plumbing doors and hatches. They allow you to maintain the integrity of the screen, but at the same time give access to the pipes.

If you don't know how to do drywall bath screen then follow this simple and popular instruction.

1. Prepare the slats on which the whole structure will rest. Two of them should be equal to the inner line of the bath in length minus 1.2 centimeters. And two other lines of the same width are minus 0.8 centimeters. Also you will four rails are needed for the four corners of the bath to connect them to the floor.
2. Vertical elements can be immediately distributed in the corners. Then horizontal slats are attached to them (on narrow and wide sides). Those slats that are against the wall must be screwed to it with screws. All elements should be firmly fastened each other in the same way.
3. Then cut out elements from a sheet of drywall required size. Please note that for rooms with high humidity material with a special impregnation is required, which does not allow it to swell and deteriorate.
4. Then screw drywall to wooden crate. The draft screen is ready. You can complement it with a plumbing hatch, and then finish it with plastic or tiles.

Making a screen under the bath with your own hands will help video:

DIY sliding screen under the bath

It is impossible to completely get rid of the shortcomings of a solid screen. Through the hatch you can get to the pipes (often with great difficulty), but hiding the bucket in the space under the bathroom will not work. sliding screen, perhaps looks less aesthetically pleasing, but it more functional than its "brother".

To make it, you will also need wooden slats , which will become the basis for the screen. But to such a frame, instead of drywall, as in the first version, you need to attach guide profile along the length of the bath, to which the doors will be attached.

It is best to fix it with self-tapping screws, but you can also use liquid nails.

Advice. If you want the screen to look perfect, then place two starter strips on the sides, attaching them to the walls.

Then you need cut panels right size and install them in the finished profile. Keep in mind that the dimensions of the elements should be such that the doors overlap each other by a few centimeters, then your screen will look beautiful, and you will not have to waste time fitting the doors perfectly to each other.

In family life. This is not just a room where hygiene procedures are carried out. For many people, this is a place of rest, relaxation and just a secluded place where you can be alone. It is unlikely that you will be able to relax in a room where rags of the for various purposes, and packs of detergents and bottles of household chemicals are placed in the corners.

Therefore, most people strive to make the bathroom as comfortable, beautiful, and clean as possible. Some people are satisfied with simple painted walls and the ceiling, someone strives to finish everything with tiles and plastic, and someone can afford natural materials like marble and onyx.

But at the same time, everyone certainly wants to close the space under the bathroom with some kind of screen (unless, of course, the bath itself is an exclusive product that decorates the bathroom), since contemplation, valves and plumbing siphons is an unattractive activity.

Why do you need a screen under the bathroom

The screen that closes the bath from the sides performs several functions:

• aesthetic, making the space more beautiful;
• functional - allows you to use the bathroom space more appropriately if you place all household products and tools behind the screen, such as a plunger, brushes for washing the bathtub and even rags for cleaning the apartment;
• sanitary - does not allow water to flow under the bath and prevents the accumulation of dust under it, which facilitates cleaning in the room and makes it more hygienic.

In addition, the self-construction of the screen allows you to design a bathroom not as a standard “like everyone else”, but individually. For many craftsmen, this serves as a way of self-expression.

According to the installation method, the screens under the bath are divided into:

• solid;
• swing;

Each type has its own advantages and disadvantages, which are better to know in advance.

solid screen will seem most attractive to many, as it allows the best way fit the bath into the interior of the room. It is the fixed screen that allows you to clad the bath in full accordance with, which gives it a uniform look.

The advantages of this method include the following:

• a good solution for the interior of the bathroom;
• ease of maintenance of such a screen - flat surface can be easily cleaned with a damp cloth or sponge;
• The service life of such a screen is practically unlimited.

But there are also disadvantages:

• difficult access to communications located under the bathroom (usually only small window), which in the event of a breakdown may lead to the need complete disassembly screen;
• there is no way to wash the floor in the bathroom, and also check the space for mold;
• there is nowhere to store household chemicals, since it is impossible to get anything because of the static design;
• installation of the screen is quite labor-intensive, especially if you have to close not only one (long) side of the bath, but also the end ones;
• it is necessary to leave a small niche for legs under the bath, otherwise washing the bath will become quite inconvenient.

hinged screen- it is used mainly where there is a lot of space for opening doors, as well as in those bathrooms where bathroom furniture sets are used rooms.

In this case, hinged doors make the screen part of this set, allowing you to decorate the room in a single way. But for this, most likely, you will have to make a custom-made screen, otherwise it is difficult to achieve a complete resemblance to furniture.

Most often, such screens are made of MDF, which is similar in color to the shade of furniture.

The advantages of such structures include:

• high decorativeness;
• possibility to place with inside the doors are quite voluminous shelves for various accessories and household chemicals (moreover, the full opening of the doors makes their use as convenient as possible).

• can only be used in bathrooms of considerable size or with a small amount of equipment;
• the need to order a screen greatly increases its cost.

Sliding screens- Most Popular. In the manufacture of their own hands, this type is most often used.

Such a screen consists of two horizontal guides along which two doors move.

A ready-made screen of this type can be bought at the store or ordered if the dimensions of your bath are non-standard. Usually the length of the screen varies from 150 to 180 cm. Its height can also be changed with the help of sliding legs, which allow it to be adjusted to a bathroom of any height.

Frames and doors of such screens (both factory-made and self-made) can be made of various materials. For frames most often used:

• - cheap, strong enough, not afraid of moisture and easy to clean material of various colors and textures (the only drawback is when strong blow may burst);
• aluminum - stronger than plastic, moisture resistant, can be painted in any color (but the paint may eventually be erased from the surface of the profile;
• an option with a roller mechanism, which allows you to make the frame invisible and makes it easier to slide the doors (but their price is much higher and it is almost always necessary to order the mechanism individually).

For the manufacture of doors, the following materials are used:

• plastic - a lightweight material, diverse in appearance, not afraid of moisture, but with an accidental strong impact it can collapse;
• MDF - outwardly very similar to, there is a wide selection of textures and colors, but the moisture resistance is not too high;
• Chipboard - inexpensive, can be covered with a film, but has low water resistance (the material is quite heavy and more suitable for swing doors);
• plexiglass - a wide variety of textures, moisture resistant and durable, looks much better than plastic, but also brittle under mechanical stress.

Making a screen with your own hands

Most often, for self-manufacturing, they choose the option with a fixed screen having a technological hole.

Such a screen can be made in several ways:

• lay out of brick;
• make a wooden or steel frame and sheathe it with drywall or other board material.

brick screen - a durable stationary structure that can only be removed by completely disassembling it. Therefore, before installing it, you need to make sure that all pipes, their connections, siphons and valves are in excellent condition and do not require repair for many years.

For the construction of the screen wall, you can use a well-burnt brick (it does not absorb moisture well) or a partition block:

1. First you need, in accordance with the size of the brick, mark the masonry line on the floor. More often, the wall is made half a brick thick, it can also be placed on the edge, but such a wall will be unstable.
2. Laying is carried out in the usual manner - with dressing of the seams. For greater stability of the masonry, it is connected to the walls of the bathroom, attaching a wire to them at the level of each row.
3. When laying out the wall, leave a hole of the required size in it in the state of communications under the bathroom.
4. Since the bath expands upwards, then in top rows you can lay a brick on the edge.
5. After the masonry dries, it is tiled or.

Never use masonry as a support for the edge of a bathtub. In order to prevent this from happening, a gap of about 1 cm is left between the top row of bricks and the bathroom, which is then foamed.

this is the simplest and cheap look screen for self-production.

For its manufacture, you need to build a frame, which is then sheathed with sheets of drywall. The frame can be made of both wood and metal profiles. When using a wooden frame, it needs to be painted or treated by special means to reduce the likelihood of rotting and mold.

For a wooden frame you will need:

• bars with a size of 40 * 40 mm;
• screws;
• metal corners.

The order of work is as follows:

1. Measurements are made at the location of the screen and the marking of the places where the bars are attached. In this case, it should be borne in mind that the screen frame should be slightly recessed under the bath, taking into account the thickness of the finishing layer (). If you plan to finish the plasterboard with tiles, then you need to add another thickness of the tile and the adhesive layer.
2. The frame bars are being prepared according to the measurements: 2 horizontal and vertical bars in required quantity. If the bath is short, then 2 vertical bars along the edges of the frame will be enough. If the bath is long, then it is better to add a couple more vertical bars at a distance of 50 - 60 cm from each other for structural rigidity.
3. In the extreme side bars, you need to drill holes for attaching the screen to the walls.
4. Then the frame is tied with screws and corners.
5. The frame is attached to the walls.
6. If necessary, the lower bar of the frame can be fixed to the floor.

To make a screen you will need:

• drywall moisture resistant;
• hinged hinges for hanging the inspection hatch door;
• metal latch.

Operating procedure:

1. The drywall sheet is marked up so that it covers the entire frame.
2. The planned panel is cut out with a construction knife or.
3. A hatch hole is cut out in the panel and the door is hung and fixed with a latch.
4. The screen panel is attached to the frame with screws.
5. Check the stability of the screen and, if necessary, make its additional fastening.

The last step is to finish the screen surface with the selected finishing material: film, tile, mosaic.

When using a metal profile as a frame, the procedure is the same, only drywall is fastened not with screws, but with self-tapping screws.

For self-manufacturing of screens, you can use not only the materials listed above, but also many others:

• Wood - you just need to pick up wood that is not afraid of dampness. Such a screen can be made in the form of wooden blinds - that is, with gaps that will help ventilate the wood and the space under the bathroom.
• Plastic lining - mounted vertically on the frame so that water does not linger in the seams. You can also make a screen with narrow gaps.
• Fabric - for such screens, quick-drying fabrics are selected that are easy to care for: polyester, nylon, membrane "breathing" fabrics. Such screens are obtained by upholstering or covering the frame with the selected material.
• As an inspection door, you can use a ready-made inspection hatch in a suitable color.

Sometimes they make screens, the walls of which deviate outward with the help of special fittings. On the inner surface such screens have narrow but long baskets for storing cleaning products, sponges and other necessary accessories in the bathroom.

Often in the kit they have a ready-made screen made of the same material. All components are supplied with screen shields.

It is more difficult to make a screen for a corner or curved bath. Here better fit bent metallic profile lined with plastic.

If you don’t want to equip your bathroom with a boring purchased screen, then you can always make an inexpensive and beautiful home-made one. True, you will have to spend time and make efforts, but the product will be piece, and your bathroom will be exclusive.

Even minor, at first glance, details in the interior will help to make the appearance of any room complete, unique. And the same little things can completely spoil our impression. DIY sliding screen under the bath – a useful thing that can solve many small problems that spoil the mood.

Bath Screen Materials

1. From MDF
2. From PVC panels
3. Acrylic
4. Plexiglas
5. Mirrored
6. With ceramic tiles
7. From tongue-and-groove slabs
8. From drywall.

Choosing a bath screen

Screen design

These structures are also different. Products are produced standard length: 1.5 or 1.7 meters. The height indicator is in the range of 560, 550, 506 millimeters. The product has special legs that allow you to adjust this characteristic.

1. End screens - cover the corresponding part in the bathroom.
2. Varieties where there are no end frames.
3. Universal models. Plastic panels are enclosed in an aluminum frame. The length of the frame itself can be reduced if customers have such a desire. Thanks to this, an easier do-it-yourself installation of a structure becomes easier where sewer pipes pass.
4. Normal view. Plastic panels are enclosed inside the frame, the performers try to adhere to certain sizes.

About MDF structures

Most often, modern buyers make a choice in favor of plastic, but this does not mean that the choice is only limited to them. One of the most common materials is MDF board, which can resist even moisture in large quantities.

The material, in essence, is a kind fibreboard, which has an average density. It is created using pressing technology when supported high temperature, pressure.

Compared to plastic, these models are more expensive. But on the other hand, the appearance can also be called more massive, impressive. It is best to choose the color and material so that they match the decor that is already present in the room.

Screens made of plastic and MDF are not moved apart by the same mechanisms. MDF products simply open inward, which is very reminiscent of ordinary furniture facades.

Differs in MDF and higher resistance to mechanical loads.

We install a screen made of wood - expensive and fashionable

What sizes are the designs available in?

• 540 mm high, 1700 mm long
• 540+ 1600 mm
• 540+ 1500 millimeters.

All models have legs, thanks to which the height can be adjusted up to 620 mm.

Several color options are also available.

• Vanilla
• Olive
• White
• wenge

And these are just a few options for modern buyers.

Is it worth taking an acrylic screen?

These are models that are only suitable for rooms decorated in a certain style, having a certain appearance.

Such products are most often produced immediately complete with the bathrooms themselves.

For each model, a truly unique jewelry is developed that has a certain set of characteristics.

How can you do everything yourself?

From the very beginning, we need to understand the requirements that any sliding bath screen must meet.

1. There should not be any support on this part near the bath itself. The product cannot play the role of a supporting structure.
2. Near the screen, you will definitely need to take care of high-quality floor sealing.
3. There must be a technical opening that allows, if necessary, access to all communications. To hide this part, it is allowed to use small doors or plugs.

We buy an acrylic screen complete with a bathtub

Working with brick

It is necessary to lay it between the walls where the bath itself is located. The main thing is to withstand the thickness, it should be equal to half the brick. It is by this value that it is necessary to shift all subsequent rows. It remains only to change everything depending on the specified parameters.

It is important to make a special window where the drain will take place. In the future, just a door is attached there. small size. The bath should not be leaned even on brick screens, this is one of the most important rules. Between the last row of bricks and the bathroom itself, you will need to create a small gap. Usually it is no more than 1-2 millimeters, then it is covered mounting foam. After that, the brickwork is sheathed.

What about drywall?

One of the most good decisions. A timber beam or a metal profile is perfect for forming the main frame. True, if the choice is made specifically in favor of wood, it will be necessary to process the material with the help of soil. Otherwise, it will not be possible to completely protect yourself from mold and rot.

The frame requires a small recess, this should be taken into account separately when creating it with your own hands. The face material will then be on top of the skin. As for the thickness, it should be the same as that of this future skin. By this amount, it is necessary to deepen the entire structure later. Correction will help to carry out a plumb line.

We mount the drywall screen

What other work can be done?

The UD profile is fixed along the outlined line. To prevent water from getting under the bath, it is necessary lower part structures with sealant.

CD - profile, which in any case must maintain a vertical position. Fastening takes place on the base profile. Between them you need to leave a certain distance, not less than 600 millimeters. Where the technological hole will be located, it is worth installing additional racks. It is better to provide a protrusion for the legs in the center.

The installation of the profile is carried out in the form of the letter P. It must be deepened under the bath, only 10 centimeters.

A moisture-resistant variety of drywall is best suited for finishing screen sheathing. The main thing is to observe the width and height of the structure, make a small margin of 2 cm.

Self-tapping screws are used when fastening along the perimeter and in the center of the profile, while it is important to observe a step of 15 cm. It is important to monitor the self-tapping screws, if handled carelessly, they can damage the bath. It is recommended to retreat 1 cm from the edge and the floor, then the drywall will not swell. This material is water resistant, but constant contact with moisture can be dangerous for him.

Tiles and foils can be used to prime the finished surface. This is one of the last stages of work. Suitable and decorative plaster, many prefer washing wallpaper.

Are there other options available?

Working with drywall partitions is very similar to what can and should be done with OSB, MDF. The only difference is that in the latter case, an additional window is needed inside the screen, which will be responsible for ventilation. The main thing is that it should be located on the opposite side from the place where the technical hole will be located.

Length - within 5-10 centimeters, width - about 2-3. A plastic grill will help cover everything. On both sides it is necessary to cover the MDF sheets with a primer. And this must be done before the final fixing on the frame.

What features of the installation should you be aware of?

The screen fixture is easily mounted directly on the sides of the bath if it is acrylic. But this is unacceptable if you need to do everything under a cast iron bath. Otherwise, the enamel surface will deteriorate.

The complexity of installation usually depends on how complex design the screen itself. Installation of a guide profile in the shape of the letter Ш is a mandatory requirement if a product with sliding doors is selected. After that, you need to cut out the details, which will be the doors in the future. One door must be larger than the other. Only after that they are installed in the guide profile.

Screen holder under cast iron bath DO NOT mount on the sides of the bath itself

What about drywall construction?

The first step is to assemble a frame that matches the dimensions we need. You can not do without wooden bars 40 by 40 millimeters, screws and metal corners.

1. Markup is the first important step. A plumb bob is used to apply to the surface right amount points. Then they are connected in single lines, usually going to the floor from the corners of the bath. There should be two such lines.
2. It is necessary to retreat 2.5 cm from each of the drawn lines. And draw one more parallel to the previous ones. But they will move inside the bath. Points for drawing lines on the floor are marked in much the same way as they are used. We get 4 lines.
3. The plumb line must be applied to the outer corner of the bath, which is not adjacent to them. After that, another point is placed on the floor. This is the top of a square whose side is 2.5 centimeters. It is turned inside the bath.
4. Several lines will need to be drawn from the corner of the square facing the bath. They are connected to those lines that were described in paragraph two.

• For the vertical sides of the square, you will need four of them. The length will be equal to the distance from the floor to the lower edge of the side of the bath.
• On the shorter side of the bathtub, two are needed for the frame.
• Finally, on one long side, you will need two parts.
• Several rails in the vertical plane will be needed if the bath has a large length.

After that, finally, you can go to the framework itself.

1. Four short bars need to be interconnected using metal corners. Do-it-yourself screws are required for fastening. Between the vertical rails it will be necessary to place parts with horizontal position. The reverse order of actions is not allowed.
2. You need to drill two holes in the rail that is attached to the wall
3. The frame should be on the wall, on the small side of the tub. Depending on the material from which the frame is made, select the appropriate fasteners.
4. The long frame is mounted in the same way. It is attached to the second wall.
5. If additional vertical slats were prepared from the very beginning, then first they are attached to the frame, and then you can go further.
6. To connect both structures, screws will be needed. The fabrication of the frame can be considered complete.

Installation of a curved frame

The general principle is about the same as described above. But it is not without its nuances.

• Profiles for drywall - the basis for the manufacture of the frame; first you need to make cuts, only then give the necessary shape;
• There should be 2 such curvilinear profiles in total. They are fixed using ordinary self-tapping screws. Next, you can go to the vertical slats, they will strengthen the frame.
• He himself should be on some recess from the side.
• Only after the installation of the frame does the installation of the screen itself begin.

A little about sliding and removable options

Most often, acrylic bathtubs are equipped with removable screens. The latter are sometimes made of the same material, come in a kit, ready-made. Such products are distinguished by an attractive appearance, ideal for the baths themselves. But they do not allow to fully use all the free space.

Choosing a plastic sliding screen for the bath

Construction with external open shelves is one such model. Plastic is used for its manufacture, it is a convenient and practical option.

The material is also used in the production of finished structures. You can always choose an option that will have an end insert. The main thing is to purchase a model that clearly and accurately matches the size of the bath. Exact fit in place will have to be done in any case.

For blind structures best material becomes a brick. In the future, it is easy for him to make a lining. But in any case, it is important to provide for the presence of a technological opening so that there is always access to the main technological communications. The main thing is that even this detail should not stand out against the general background, fit into the existing interior. Other materials can be used, but this design is often quite complex.