Proper mounting of the TV on the wall with your own hands. How to wall mount a plasma TV

IN modern world There are two ways to install a TV. Due to the fact that plasma and liquid crystal types of screens have entered our lives, the TV can now not only stand on a cabinet, but also hang on the wall. Let's figure out how to properly hang the TV on the wall. Now the TV looks like wall decor, and in some interiors the TV can be hidden altogether and give it the look of a picture by framing it with a frame. And you can pass it off as a mirror, for example. For this, TVs with a special reflective coating are used.

In modern minimalist rooms, you can’t do without installing a TV on the wall, so we free up space from extra furniture in the form of a cabinet, creating the illusion of flight and lightness. However, installing a TV on the wall is not such an easy task, how to properly hang the TV on the wall, we will analyze detailed briefing about installation.

Below are a few typical tips that TV manufacturers present:

• To carry out installation in 4 hands, with the weight of the device more than 25 kg;
• Perform diagnostics and inspection of the wall, whether the wall can withstand the weight of the TV;
• Connecting the TV to the network, only after mounting on the wall;
• Provide air flow to the TV for ventilation, avoid small and enclosed spaces;
• To avoid sparks and fire, make sure the cable is not pinched by the bracket. This can happen when turning the TV sideways.

How to hang the TV on the wall, choose a place

To begin with, you must decide on the choice of a place for the TV on the wall of the room. The main thing here is to follow the recommendation from the manufacturer and not to hang the TV in a closed, non-ventilated space, so special TV niches are not appropriate. Try to hang the TV on an open wall space. If suddenly the desire to install TVs in a niche is very large, use the distance from the edges of the TV to the niche on all sides around the perimeter, at least 20 cm. Or you can buy an LCD panel that can be freely built into any niche.
If the apartment or house did not previously belong to you, then you will need to check with a metal detector if the cable is running along the wall you have chosen.

When choosing a place for a TV, pay attention to the quality of the material from which it is made. For example, you can hang a TV no more than 35 kg on a plasterboard wall that is not reinforced. To strengthen such a wall, you can use a sheet of plywood. Just screw it on the wall as a TV base. To add aesthetics, paint the plywood to match the main wall or wallpaper it the same as on the wall.

How to hang the TV on the wall, choose the bracket

How to properly hang a TV on the wall without a bracket? That's right, it will be very difficult to do this. The bracket can be purchased at any specialized retailer. household appliances. It is best to purchase a TV immediately with a suitable bracket for it. By the way, now in some models, the bracket comes directly with the TV.

When buying a bracket, be sure to pay attention to its characteristics; the instructions should set specific requirements for equipment. Also consult with the seller, indicating to him the brand and model of the TV. So you will definitely pick up the bracket you need.
Brackets according to their functionality are divided into three main types, these are simple brackets without the ability to turn the TV to the sides. Brackets with turns in two directions and the third type is a bracket with the ability to turn the TV in all directions.

How to hang the TV on the wall, hide the wires

So that the wires and cable do not spoil the aesthetic appearance of the TV zone, you can build a cable channel into the wall. The easiest way to do this is in a wall that is made of drywall. To do this, you need to drill 2 small holes in the wall. The first hole will be behind the TV, where you need to put your cable. The second one will be drilled in the wall near the floor so that the cable can be pulled under the plinth and hidden from public view.

But what to do if your wall is made of more durable materials and such a method as a plasterboard wall will not suit you? In this case, the cable channel can be run directly along the wall. Buy a plastic, ready-made cable channel in the store and screw it to your wall, in the same way. From the TV to the baseboard, then run the wires from the cable duct to the baseboard. plastic box then you can paint in the color of the wall so that it is less noticeable.

How to hang a TV on a concrete wall

If suddenly you hang the TV during the repair and do not want to make an external cable channel. You can then choose a dirtier version of the work and gouge the recess for the cable directly into concrete wall. Insert the cable there, and apply a layer of putty on top. Everything is ready, now the cable comes out of your wall neatly. The main thing is that before you start ditching, you need to make sure that the TV will stand in its original place until the next repair. See detailed technology on video.

How far away should the TV be on the wall?

Ophthalmologists require that the distance from the TV to the viewer's eyes must be at least 3-4 diagonals of the TV screen. For example, your TV has a diagonal of 40 inches, which means that the TV should hang at a distance of 120-160 inches, converting to meters, this is about 3-4 meters from the viewer.
In addition to correctly calculated distance to the point of the TV, it is necessary to sit in front of the TV without moving from the center point. The maximum deflection radius should not exceed 30 degrees.
In addition to selecting the distance from the TV to the viewer's eyes, it is also necessary to calculate ideal height for mounting. In order for viewing to be as comfortable and safe as possible, the middle of the TV screen should be at eye level. On average, this value is about 1 meter, it all depends on the height of the sofa or chair, the higher the seat, the higher the TV weighs.

How to hang a TV on the walls of different rooms

Ignoring the rule about the optimal mounting height and hanging the TV high is possible only in those rooms where the TV is rarely watched and not for a long time. For example, in the kitchen, the TV is likely to be listened to while cooking.

If the TV will hang in the living room, then you can determine the point without measuring the height of the sofa. Sit as comfortably as possible on the sofa, in a position that is comfortable for you. Close your eyes for a minute and relax, and when you open your eyes, look directly at the wall where the TV will hang. The place where your eyes immediately fell will be top part screen.

In order to pick optimal height for a TV in the bedroom, you need to lie on the bed and measure in the same way as described above. The TV in the bedroom will most likely hang higher than in the living room, since you most often watch TV in the bedroom from a lying position.

Previously, TVs could only stand. After the advent of flat screens, it became possible not only to install them, but also to hang them. How to hang a TV on the wall? What mounting methods are used when mounting a TV?

Ways to fix the TV to the wall

The choice of support and method of its attachment is determined by the size of the monitor, the characteristics of the wall, as well as the weight of the device. The weight of a medium-sized TV screen varies from 15 to 35 kg. A large monitor weighs more. A large screen plasma TV (greater than 60 inches) or an LCD TV up to 65 inches can be mounted on any wall (concrete, brick or drywall) using amplifiers if the screen is heavy. You can also hang a curved TV on the wall, its thickness is only 5 mm.

Knowing how to mount a flat screen will help you decide how to properly hang your TV. Let's list them:

• support mount - a device that fixes the screen on a vertical metal strip with a gap of several centimeters. The support can be factory-made or home-grown, made from improvised means;
• a bracket is a hand-held device to which a television screen is attached. Various models of brackets differ in the degree of mobility, angles of rotation. According to these features, the brackets are classified into rigid, inclined and tilt-rotary.

How to choose a bracket

The rules for mounting video equipment indicate that a gap is required between the back of the screen and the wall surface. Therefore, it is better to hang the TV on the wall using a support or bracket. Without a gap, you can mount, as already mentioned, only small screens.

Also keep in mind that it is preferable to hang small screens on brackets with a movable “arm”. If the screen has a large diagonal, then for safety it is better to mount it on a fixed version of the bracket. The model is also selected according to the weight and diagonal of the TV.

To hang the TV on the wall on the bracket without fear of falling, you need to choose the right model of the mounting device, its characteristics and installation method. Modern industry produces brackets of two types: with rigid fixation and adjustable (they can change the position of the screen, tilt or rotate its plane). In addition, the characteristics of the bracket indicate the maximum diagonal of the monitor (or its weight), which can be hung on this fixture. As well as the VESA mount standard, which stipulates certain distances between mounting holes.

Types of brackets:

• rigid fixation of the "arm" of the bracket - ensures a constant position of the screen. Tilt mount - provides screen tilt up to 20º, as well as a distance from the support - 15 cm;
• tilt-swivel fasteners are the most functional and expensive bracket. It is delivered ready-made, requires responsible assembly.

Choosing a mounting method

How to hang a TV on a wall with a bracket

We take out the bracket and sort the parts. The kit consists of two parts: a wall panel and the bracket itself (attached to the screen). Collecting necessary details. These parts are attached separately: the plate is attached to the wall, and the bracket is attached to the back of the TV screen.

Photo 1. Wall bracket

Make sure there are no wires before drilling holes in the wall. Then mark their location strictly perpendicular to the TV. After drilling, insert the bolts, securely fastening wall panel.

Now the bracket is attached to the screen with the bolts from the kit. And now the whole structure is going - the bracket is attached to the panel on the wall.

How to hang a TV on the wall without a bracket

Instead of a bracket, you can use another device - a flat support. Its use is necessary to provide the necessary ventilation gap between the back of the screen and the supporting surface. It is convenient to hang on a support when the screen size is small.

The support for a flat TV can be assembled from improvised means, which saves some part family budget. A metal furniture “tire” is used as a base, anchor plates for windows are used for fastening. The “tire” is attached to a wooden bar with self-tapping screws (they are screwed into holes that were prepared in advance with a drill). After the bar is mounted to the wall along with the tire.

Photo 2. Furniture tire

In order to strengthen the screen on the furniture rail, anchor window plates are used. They are attached to the back of the flat screen with screws. If the anchor plates are too long, they are shortened (cut with scissors for metal or a grinder). When the plates are fixed, the screen is put on a furniture rail (they are hooked to the anchor plate).

We figured out that there are two ways to mount the monitor and TV screen to a vertical support - using a rigid support and a bracket. And now consider how to attach supports and brackets to various walls(concrete, wood, plaster or clay) and hang the TV on a plasterboard wall.

If the mounting points are poorly visible on the TV panel, and the bolt heads are filled with easily damaged plastic, and they are designed for a special key and a regular screwdriver will not work for them, only a specialist should mount this TV. At the end of the work, he puts his seal on the warranty card. Otherwise, all warranties will be void.

Wall material and choice of fasteners

We list the types of walls and the features of the fasteners that are used for each material:

• concrete and brick - use dowels for concrete and brick with a length of 50 mm or more;
• for wooden surfaces- use fixing dowels with a length of 30 mm or more;
• for drywall surfaces - special dowels are used in the shape of a butterfly, snail. When twisted, they open with inside and forms a fixative extension. These dowels are called "hollow wall attachments". They are suitable for all types of framed hollow structures (plasterboard, plywood or OSB).

Photo 3. Butterfly dowel before and after screwing

The installation method depends on the wall material. To hang the LCD TV on the wall for a more secure and durable mounting, use the wall plug. Thanks to such screwing, the screw (self-tapping screw) will hold the structure more securely than when fastened directly to the wall.

Hanging a TV on a solid brick is an easier task than mounting a screen to a frame wall. The hollow structure may not support the weight of a large screen (it can reach 30 kg). Is it possible to hang a flat TV weighing 10-20 kg on drywall without additional reinforcement? Let's analyze this mounting option in more detail.

How to hang a TV on a plasterboard wall: general rules

The most durable and reliable installation of the monitor on drywall provides for the reinforcement of the GKL sheets or the fastening of the support to the internal metal profile. This allows you to solve the question of how to hang the TV on plasterboard wall.

With additional reinforcement of drywall with plywood, it is installed behind the GKL sheets. In this case, a sheet with a thickness of at least 10 mm is used. This greatly enhances bearing capacity wall, makes it possible to mount a heavy screen weighing more than 35 kg to it. When mounting on drywall, butterfly dowels are used so long that they pass through a layer of drywall and plywood.

If you want to get the most reliable installation in this case - to a metal profile, then it will be easier to perform it during the wall assembly process. If frame structure already mounted, you can determine the location of the profile with a metal detector and drill holes for dowels at the location of the profile.

With a relatively small weight of the TV screen (up to 30 kg), installation can be carried out without additional gain supports.

How to hang a TV on a plasterboard wall: technology

Builders allow hanging objects weighing up to 35 kg on drywall. Therefore, a lightweight monitor can be hung on the GKL, the weight of which does not exceed the indicated values. So, to understand how to hang a TV on the wall with your own hands, you need:

1. Assemble that part of the bracket (or support) that will be attached to the wall.
2. Drill holes in the wall, attach the support panel to them and screw in the butterfly dowels.
3. Assemble the second part of the support - hooks, and fix them on the back of the TV.
4. Hang the TV using hangers.

Video on how to hang a TV on the wall

The video demonstrates the process of attaching something to a drywall wall, showing ways to strengthen the wall. Thus, it will be able to withstand a certain weight.

To answer the question of how to properly hang the TV on the wall, you will not need professional knowledge. If you are in doubt about the choice of mounting method, use the strongest option that guarantees the maximum reliability of your installation.

In contact with

Thanks to modern technologies, we now have thin, almost flat TVs. Not only can they have any diagonal size - from small to huge, but also their weight is several times less than the old models. All this makes it possible to mount them on the wall. This option removes almost all restrictions - you can hang the TV even in the walk-through area, taking care of reliability. What is a wall mount for a TV, how to mount it - read on.

You can hang a flat screen TV on the wall, or you can use a ceiling mount. The second option is less popular - the screen is too high. This type of installation is usually used in kitchens, where the walls are occupied by cabinets and lockers, and the TV itself is more like an accompaniment, and not the main occupation. In all other rooms - bedrooms, living rooms - most often they use a TV mount on the wall. Not installing it on the legs-stops, namely hanging it on special frames or mounting plates.

Height

First you need to determine the height of the TV installation on the wall. This parameter is selected individually, and for different height And different type furniture height may vary. They proceed from the fact that it is convenient to watch TV if the middle of its screen is at eye level and it is easier to determine it experimentally. In the living room, you need to sit on a sofa or chair, looking in front of you to determine the height of the middle of the screen. Approximately - this is 100-120 cm from the floor level.

Approximately the same determine the height of the TV installation in the bedroom. Here, usually watching TV takes place from the bed, so its height may be lower. But from this position it is more convenient to look not straight ahead, but slightly up, so too low is also inconvenient. The average height of the TV in the bedroom is about 100 cm. Again, this is the height of the middle of the screen.

Distance from furniture

This parameter is not entirely related to the topic of mounting a TV on a wall, but without it, there is no way. Comfortable viewing distance depends on screen size. In fact, everything is simple here - there is a table in which the minimum and maximum values ​​\u200b\u200bare indicated, you need to “fit” into this framework.

This table, by the way, can be used for another purpose - knowing the distance at which you will have a sofa or chair installed, choose the diagonal of the TV.

TV mount types

You need to choose a TV mount on the wall after you have this TV. On his back wall There are holes for installing fasteners. You will need distances between them. By measuring them, you will know with what distance you need a suspension (this data is also in the passport). Some TV wall mount models allow you to change this distance, but not all. So you have to be careful.

What else you need to pay attention to is the material from which the fasteners are made. They are made of plastic and metal. Plastic ones are suitable for small and light models. Metal - for heavier ones. There are also combined models - made of metal, but with plastic parts. In any case, you need to focus on Weight Limit TV that can hold the mount. This setting is specified in without fail, along with the dimensions of the screen diagonal.

For fixed mounting

If there is no need to rotate the TV screen, it is better to choose a bracket for fixed TV mounting. This option takes up almost no space, allows you to hang the device almost close to the wall. There are models that allow you to hang the screen parallel to the wall, there is a fixed tilt.

TV wall mount: model for "heavyweights"


One part is mounted on the wall, the second is attached to the back of the TV

Consists of two plates. One of them is hung on the wall, the second is screwed to the TV. On one part there are protrusions, on the other - grooves. When mounting with protrusions, we cling to the grooves. Everything, the TV was hung on the wall. Naturally, the more the TV weighs, the thicker the metal should be on the bracket.

Tilt brackets

This type of TV wall mount allows you to change the angle of the screen relative to the floor. In some cases, this is convenient - you can expand the screen for a clearer perception of the picture.

This type of mount takes up a little more space. Structurally, the models are very similar to the previous type, only one degree of adjustment has been added. Since the screen is usually tilted slightly down, it is the upper mount that makes it movable.

Tilt-and-swivel

The screen installed on such brackets can be rotated both in the vertical (turns to the right and left) and in the horizontal plane (up and down). To ensure the possibility of such maneuvers, the screen is moved away from the wall at a fairly solid distance, and this must be taken into account.

They are installed in multifunctional rooms where it may be necessary to rotate the screen. It can be used in the kitchen, in offices, in rooms where there are different functional areas. This TV wall mount is significantly more expensive, as it uses complex mechanisms to ensure rotation.

In some brackets (fixed and inclined), in the part that is attached to the wall, a bubble level is mounted. When installing, it’s easier to navigate, but if you have a good and proven one, check the correct installation with it.

How to hang a TV on the wall: the choice of fasteners

Perhaps we should start with the choice of fasteners. Often, a wall mount for a TV is completed with fasteners - dowels. They are designed for maximum weight that the bracket can hold, so they can be used. But they are only suitable for walls with normal bearing capacity - brick or concrete. Now, walls are often made of loose materials in which the dowels do not hold and nothing can be hung on them. For such walls there are fastenings.

For drywall

For plasterboard partitions, special butterfly dowels are used. They are plastic and metal. Since the TV still has a fairly solid weight, it is better to take metal dowels. The load that they can withstand is much higher than that of plastic ones.

When a dowel is screwed into the installed plug, the plug “opens”, forming separate “wings”, which redistribute the load on large area. It is due to this that you can hang something on the drywall.

But, even with such dowels, when installing the TV on a plasterboard wall, try to choose the installation height so that the top fastener of the base plate falls on the profile or beam to which it is attached drywall sheet. Otherwise, there is no guarantee that the sheet will withstand the load.

For loose and hollow substrates

For hollow and crumbling bases, there is another fastener - chemical dowels. For crumbling and loose substrates, they consist of a capsule or ampoule, with glue and an anchor or stud. For hollow bases, a mesh cylinder is added to this set. When installing the TV on the wall, a hole is drilled for fasteners, it is well cleaned. This is very important point. The hole must be cleaned of all crumbling particles (you can use a vacuum cleaner). Only in this way can one count on normal adhesion (adhesion to the material) and good bearing capacity of the fastener.

An ampoule/capsule is inserted into the prepared hole, a hairpin/anchor is twisted or hammered into it, and a dowel plug can also be installed. Next, you have to wait until adhesive composition harden (about an hour), after which you can continue to work.

In walls made of hollow bricks or building blocks, a mesh cylinder is first installed in a prepared hole. Then a capsule / ampoule is placed in the cylinder and all further actions are no different. Why is a cylinder needed? It does not allow the adhesive to spread much, but allows it to seep and adhere to the nearby material.

Is it possible to save money by using not chemical dowels, but ordinary glue? In general, it is possible, but without guarantees. Chemical dowels use an adhesive that provides adhesion to different materials, including plastic. Ordinary glue does not have such properties.

For thin walls

In some cases, you need to hang the TV on a partition of small thickness. Moreover, they are so thin that it will not work to install fasteners of the required length - it will come out on the other side. In this case, it is better to take not dowels or screws, but studs or bolts. Drill through holes, on the other hand, under the bolt head or stud nut, place a wide washer. This will give good bearing capacity even in gas or foam concrete.

To with reverse side wall fasteners did not spoil the picture, it can be "drowned". To do this, drill a hole of small depth - so that you can hide the washer and cap / nut. After everything is installed and fixed, it will be possible to cover these holes with putty.

For thin walls with normal bearing capacity (brick) there is another way - use it as a gasket wooden block or strip of metal. This will help to install fasteners of normal length, at the same time more evenly distribute the load.

Mounting the TV on the wall: step by step instructions

After you have decided on the installation location of the TV, you need to check if there is any wiring in the wall. You can do this with . Only after that you can proceed with the installation.

Everything, the TV mount is installed on the wall, the TV is hanging. Can be included. But this instruction for hanging the TV on the wall is suitable for fixed and tilted models. Tilt-and-swivel brackets have only two extra steps - you have to remove the plate that attaches to the TV. Usually it is one or two bolts. An example of installing such a TV mount on the wall in the following video.

Homemade TV mounts

As you have seen, TV brackets are not God knows what complex product. Especially those for fixed mounting. Moreover, the price of some models (of good quality, from good metal) not little. To save money, you can try to do something similar using affordable and widely available materials.

From aluminum corners

The supporting structure for hanging the TV on the wall is made of four corners. Aluminum corners with a wall thickness of 3 mm were chosen, the width of the shelf - at least - 25 mm. Otherwise, it is very inconvenient to work.

You can also take steel ones, but they are more difficult to process - cut, drill - and the load from modern TVs is not so big.

The corners are cut off according to the distance between the holes for mounting on back side TV with a margin of a couple of centimeters on each side. The most difficult thing is to make holes in the corners so that they exactly match the mounting ones, and are also on the same level. This will allow you to hang the TV on the wall evenly.

On the pair of corners that is attached to the wall, you can drill holes arbitrarily. It does not matter. You can make two holes, you can - more. Depends on the bearing capacity of the walls. Two are enough for concrete. But you need to find out at what distance they need to be placed on the wall. It should be such that the corners fixed on the TV are either slightly wider or slightly narrower (by the thickness of the corner, plus one or two millimeters for free movement.

Having exposed the corners, we circle the places for installing dowels, drill holes in the wall, insert plugs, but do not hang the corners yet. It is also necessary to drill holes in them into which the fixing fasteners will be inserted. To do this, we fold the corners as you will have them ready-made on the wall, mark where you need to drill holes, make it (the diameter is small). Now you can install on the wall.

Next, you need to combine the holes in the corners, insert fasteners into them. In this case, bicycle spokes were used, but these can be bolts, studs, etc. That's all homemade mount for the TV on the wall is ready, the TV is fixed and ready to go.

With minimal effort

In order not to suffer with fitting holes, you can find mounting angles with perforations. You will need to buy eight of them - two for each mounting hole. Four to fix on the TV, four - on the wall. Next, we hang it, insert fasteners into the holes for fixing (usually small-diameter bolts).

Homemade TV mount on the wall - an option without unnecessary gestures

If such corners seem unreliable to you, you can find reinforced ones in stores. They are used to fix racks when frame housing construction, they fix bearing structures roofs So they can withstand a lot of pressure.

Pivot swivel bracket

This model allows you to turn the screen left and right, but you will need welding, a grinder, a powerful drill and a bending machine. But this mount will withstand even the heaviest of TVs. There is probably nothing to explain here.

• Two steel plates - for mounting on a wall and a screen, in which holes are made in the corners for fasteners;
• Two segments steel pipe- larger and smaller diameters. They are selected so that a larger diameter is freely "put on" a pipe of a smaller diameter.
• Eight bolts or studs.

Having some experience in welding, it will not be difficult to assemble all this, and the method of attaching to the wall is standard.

After purchasing a TV, the problem of its placement arises. How to hang a TV on the wall? Thanks to this, its position becomes stable, and a large diagonal is easier to reconcile with other objects in the room.

Tools and materials

A small set of tools and auxiliary materials will help you fix the TV on the wall:

• perforator;
• pencil;
• level;
• hammer;
• crosshead screwdriver;
• open-end or box wrench;
• bracket for TV with complete fasteners;
• additional self-tapping screws or butterfly dowels with non-standard base material.

Mounting method

Installation of any modern TV on the wall is carried out according to a single principle. It is based on the Video Electronics Standards Association (VESA) system. The Flat Display Mounting Interface standard establishes a range of allowable distances between the four threaded sockets on the back of a monitor or TV horizontally and vertically from 75*75mm to 800*400mm. Each of them corresponds to a specific thread size: M4, M6 or M8.

The TV is mounted through an adapter bracket. In the simplest case, this is a curved metal plate with holes for fastening to the back of the device and the wall. But more often composite brackets with one or more degrees of freedom are used. They allow you to change the tilt of the screen to the vertical, rotate it relative to the wall, push the device away from it.

When purchasing such a bracket, you need to carefully study the location of the interface connectors on the back of the device. They must not be covered by bracket parts. The mounting system must provide the necessary clearance behind the TV for connection and free placement of wiring plugs.

Most important parameter fastening device is allowable weight TV. It is possible that among the brackets allowed for a given model there is a VESA hole arrangement that is necessary for your TV, but it does not pass by weight. Will have to choose another.

There are TV models with holes that are not located according to the VESA system. The instructions for the device may offer to mount the TV using original device. But they are much more expensive than universal ones. Finding them in free sale is problematic, you have to order from the photo in the catalogs.

It is more profitable to choose a universal model, where right size set by stepless displacement of parts and fixation through oval holes. The location of the threaded sockets not in the same plane is compensated by additional bushings and the selection of longer screws.

Execution of works

The very procedure for installing the TV on the wall is extremely simple and easy to do with your own hands. The supporting frame of the bracket is applied in the desired place on the wall and is set horizontally in level. Marks are made through the holes on the wall. The frame is temporarily set aside.

According to the marks, drilling is performed with a puncher for complete dowels. The drilling depth is laid down along the length of the dowels with a small margin. The plugs of the dowels are driven into the holes with a hammer. The frame is screwed with a wrench or a screwdriver.

For the wall on wooden base the frame is attracted by self-tapping screws. They must enter the tree at least 30 mm.

To mount the TV on a wall with plasterboard sheathing, you have to use butterfly dowels, which open behind the sheathing when tightened. For reliability, you can increase the number of attachment points.

When the installation location is known at run time repair work, behind the plasterboard sheathing, it is worth laying a mortgage from panel materials.

The legs of the bracket are fixed to the holes on the back of the TV. Next, the assembly of the bracket parts fixed on the wall and the device is carried out. Manufacturers try to make this procedure as comfortable as possible. In the general case, the parts are simply hung on top of each other with spring-loaded elements or 2 bolts preventing them from jumping off.

Conclusion on the topic

The picture takes on the most harmonious look if no wires hang from under the TV. This is achieved by placing the necessary power outlets and interface connections behind it. Sockets are best laid with a margin. This will make it easier to connect additional tuners or any other devices in the future.

It is more convenient when the sockets are located slightly above the mounting bracket. With the usual location of the TV on the wall with a slight forward tilt, the sockets are easily accessible, and they themselves are out of sight.

Related posts:

TVs hung on the wall have a distinct advantage over those placed on cabinets, tables or traditional chests of drawers. This solution is for a wider audience. Mounting the TV on the wall has a number of good points. It's great for screens. large sizes, provides more space in the room and screen inaccessibility to children, and is also an inexpensive, versatile solution that fits into traditional and modern interiors.

How to hang a TV on the wall with your own hands in the hall and bedroom. How to hang it with and without a bracket, at what height, where to hide the wires - this will be discussed in the article.

Placing the TV on the wall - advantages and disadvantages

If the TV is placed on the wall, we get a useful and aesthetic space. This solution allows you to install huge TV panels on a relatively large area, helps to beautifully expose TV as an element of interior design.

TV, placed on the wall, has a number of advantages and disadvantages.

Advantages:

• a cheaper solution than buying a chest of drawers or a table;
• children do not have access to it;
• more space for furniture;
• best solution for large size panel;
• modern look.

Disadvantages:

• harder to mount and then rearrange;
• there is no possibility of storing additional equipment.

Choosing the right TV panel bracket is relatively easy. However, there are a few things to keep in mind simple principles, which will save nerves, warn against unnecessary mistakes.

VESA standard

VESA is an acronym for the Video Electronics Standards Association (Video Electronics Standards Association). All over the world they use the VESA standard, which was adopted in 1997. The standard defines the distance of mounting holes in the cases of TVs, monitors and mounts for them.

There are several types of VESA standard, differing in purpose depending on the screen size, weight, distance of mounting holes on the back of the LCD panel.

Currently, the following types of fastening are most common:

• VESA 75×75;
• VESA 100×100;
• VESA 200×200;
• VESA 200×100;
• VESA 300×300;
• VESA 400×400;
• VESA 600×400.

If you are not sure which standard the technique is up to, simply measure the distance between the holes. Recall that the first number in the standard is the distance between the bottom hole and the top hole, and the second value is the distance between the holes in the same row.

You can use the VESA standards table, in which the distance between the fixing holes can be determined depending on the size of the screen and the weight of the TV.

If it is not possible to check the distance, you can buy a universal holder that matches any type of interval. This solution has one rather significant advantage. Thus, when buying a new TV or LCD monitor, you do not need to replace the bracket itself. The vast majority of models of brackets and other holders have universal holes that match the standard pitch.

Height from floor

If the room does not have a very large area, and the design and arrangement of the furniture allow, it is correct to hang the TV in height at eye level. The line of sight should be directed above the center line of the screen. In this case, people looking at the screen have their eyes focused on the image in a natural way. In this variant best solution become static brackets. They have the simplest design, allow you to mount the TV panel close to the wall, and are inexpensive.

As a general rule, the bottom edge of a flat screen should be 50-60 cm above the floor. Of course, the height depends on your own preferences.

For example, you can take a piece of cardboard about the size of the screen and attach it to the wall, and then look at it from different places. After determining the correct position, you can proceed with the installation of the television panel at the same height.

For larger rooms, the screen can be mounted at a slightly higher height because the audience is farther away.

At what height should the TV be placed in a large room?

For big room it is advisable to choose with more functionality, with an adjustable tilt angle. An adjustable mount costs a little more than a static mount, but gives you the best viewing angle if you want to sit closer. In addition, children will be happy as they often watch cartoons while lying on the carpet.

Ergonomics, tilt angle, swivel

The option to adjust in the horizontal axis gives additional functions. This option is chosen by the owners of such premises, where many spectators are accommodated in a large area. The advantages of horizontal adjustment were also recognized by ordinary users, so such designs began to appear quite often in private housing.

RTV brackets are equipped with horizontal adjustment and are optimal for a large living room, often combined with a kitchenette, where TV is watched from different places. This design will allow the deflection of the screen in any direction, which provides best quality images by choosing the optimal viewing angle.

Often such fixtures can be folded like an accordion, so that the distance from the wall to the screen can be the same as when using a static bracket.

The ability to tilt the screen is extremely useful for people with limited port access. It is also worth noting that the inclined type of holders performs well in unusual, difficult conditions. If the question is how to hang the TV in the corner of the wall, while you need to reject it by 90 degrees, some designs allow you to do this.

It often happens that the panel needs to be tilted in order to find the optimal viewing angle for High Quality Images. This solution works especially when the screen is placed centrally in front of seating, such as sofas, and above the eye level of the viewer.

The optimal tilt angle is usually in the range of -15 to 15 degrees.

Some brackets cannot be adjusted either horizontally or vertically. Non-adjustable holders work well if the TV panel is suspended at a low height directly in front of the viewer. These are cheap, simple holders.

Additional options allow you to rotate the bracket left and right. Rotation allows you to adjust the position of the screen to the unusual situation of the room. The swivel feature also makes it easier to access ports, such as those hidden on the back of the TV. In this case, attention should be paid to maximum size screen specified by the manufacturer in the specification of the bracket.

It's worth knowing!

Some brackets are equipped with a system that allows remote control using a remote control. remote control. Without getting up from the sofa, you can set the appropriate tilt, rotate the screen at the selected angle.

Pivot function

The Pivot feature is especially useful on LCD monitors. Some holders allow you to rotate the screen 360 degrees around the axis, and by turning it 90 degrees, install it in a vertical (portrait) position. However, most people who watch shows, movies, do not use the Pivot function.

Distance from wall

This is an especially important feature for people who appreciate minimalism, when the gap between the TV panel and the wall is visible. Manufacturers create a special series of brackets (slim / thin), so that the distance can be only 35 mm when folded. How harder design holder, the greater the distance from the TV panel to the wall.

TV size and bracket model

Whether the mount will be suitable for your TV model depends, among other things, on the diagonal of the screen. As a rule, on the packaging for the bracket, you can read information about which diagonal is the minimum, which is the maximum. Before buying, you should definitely pay attention to these parameters, because the protruding mounts look bad. Installing a TV panel that is too large will cause it to fall over or create restrictions functionality due to blocking the maximum vertical and horizontal deflection.

Manufacturers may include:

• fixing screws;
• cable winder - it allows you to maintain order with cables;
• drilling template, level will make it easier to drill holes that need to be positioned correctly, maintaining a straight line.

TV weight

It should not be forgotten that modern TVs can be quite heavy. For this reason, it is important to consider not only the bearing capacity of the bracket, but also the type of wall. If the walls are made of brick or concrete, there is no need to worry about weight. The situation is more complicated with plasterboard walls.

How to hang a TV on a drywall wall?

It is necessary to provide the largest possible contact area in order to distribute the load over the entire surface and minimize the risk of falling. Some models have the ability to mount brackets with 6 screws instead of the standard 4, which positively affects the stability of the entire structure. If the wall is made of drywall, you should entrust the installation of the TV panel to professionals.

Mounting the brackets is relatively easy, usually just a matter of having the skills to use a drill. Installation does not require expert knowledge and advanced tools. The most important is the choice of the place itself - the walls. If the walls are made of brick or concrete, installing the bracket is not a major problem. The problem arises when the walls in the house are soft materials such as partitions. Then it is necessary to consult a specialist/seller or purchase a suitable holder with the largest possible surface adjacent to the wall.

• Before drilling, you should correctly draw the location of the holes using a suitable template, such as that supplied by the manufacturer, and use a level that will keep the line straight.
• To further facilitate the installation process, some of the holder models provide the possibility of alignment even after they are screwed to the wall.
• After installing the TV, you should consider additional accessories. LED lights- the decision is not only aesthetic, but also reduces the contrast, which makes viewing less tiring for the eyes.
• Equally important are angled HDMI cables, special liquids for cleaning LCD screens.
• If the wall is made of drywall, the empty space in the wall can be used to hide the cables. Another option is to run cables throughout the room in a baseboard adjacent to the wall.