Heating control system. Remote control features

Device capabilities for remote control heating every year (what is there with the year - almost monthly!) are becoming more and more perfect. Smartphone app developers try to make them easy to use and easy to understand even for untrained people. Briefly, we list only the main features of such systems that support:

• normal operation, when the set temperature is maintained throughout the house;
• zone mode, when various premises may be individual temperature;
• prevention of defrosting of the heating system (freezing of pipes) in the cold season, when you are away from your country house or cottages;
• the possibility of early switching on the boiler, for example, you need to warm up a country house when you are going to visit it on weekends or holidays;
• always be aware of your work autonomous heating and, if necessary, to carry out its diagnostics;
• time regime in which different time during the day, the house can maintain its own thermal regime with a significant reduction in material costs for fuel, for example, you can set the boiler to low power(respectively, for low fuel consumption), going to work or on business, and turn on the normal mode before returning.

Remote heating control means that any of these modes, as well as specific room temperatures, are changed using mobile communications, or the heating is controlled via the Internet.
This approach is part of the ideology of creating “ smart home”, which entails the further development of all engineering systems at home in order to ensure ease of use and create the most comfortable conditions residence.

Which heating system can be controlled remotely?

In country houses and cottages are currently most often used two-pipe systems with forced circulation of the coolant: the circulation pump pumps the coolant through the entire heating system, which, thanks to the distributor comb, can be supplied to each heater.
In such systems, as a rule, a safety block of the heating system is used to protect it from destruction in unforeseen situations, for example, in the event of an increase in pressure beyond the allowable one.
It is also necessary to have additional equipment to control the operation of the heating system: sensors, special valves and devices for adjusting the flow of the coolant, and it is also necessary to combine various devices to the information network

Weather-compensated heating control

To date, it is considered the most promising. In such systems, in addition to the room temperature sensor, an external air temperature meter is also used. In principle, a weather-dependent heating controller will work with one external sensor, but using two allows you to achieve more accurate mode maintenance and even implement self-adaptation of the system to specific temperature changes: if it gets colder outside, then the temperature of the coolant in the system rises in advance, if it is warmer - then decreases in advance. In addition to saving fuel, this reduces the inertia of the system, which increases its efficiency and also provides additional cost savings. One of the basic points of the weather-dependent heating control can use a temperature of plus twenty degrees - with it, the temperature of the coolant is taken equal to the ambient temperature, while the heating is actually turned off. It is also necessary to take into account the zonal temperature control, i.e. if, for example, in one of the rooms gathered a large number of people, due to which it became hotter in it, the system detects a local increase in temperature relative to that set by the weather heating controller, and makes a correction in this zone.
In general, serious battles flared up on the Internet about - is it worth using weather-dependent automation at all or is it money thrown to the wind? In short, the opinion of our specialists, confirmed, by the way, by the reviews of numerous customers, is unequivocal - yes, it is worth it, but not in all cases. And in what? Answer

Types of remote control heating systems

Currently, two systems are used for remote control of heating:

• using a set of equipment with an Internet gateway. Availability wifi router and the Internet in this case is mandatory.
• with using GSM heating control module. Requires a special GSM module with a SIM card from a mobile operator.

Remote control of the boiler room using mobile GSM

And what if the wired Internet in country house No? How can the heating be controlled in this case?

Yes, very simply - with the help of a special GSM module and, of course, mobile phone. In fact, the GSM module performs the role of your personal assistant - you called him, gave the command, for example, to pre-heat hotter by a certain time - and the whole family will arrive in a warm and cozy house. Or vice versa, if you forgot in the morning, leaving for work, to reduce the power of the boiler is not a question, you can do it right from work, via the Internet or directly from your smartphone, while you are still getting to work. The GSM module is a compact device with its own SIM card of any operator (it is important that it provides reliable signal reception in the area), which allows you to control the indoor climate from any phone (satellite, mobile or fixed line), tablet or PC.

Depending on the settings you have made, your phone will either receive short SMS notifications with various information and instructions on how to change the boiler settings, or you will receive phone calls with various information about the operation of the heating system. A special mobile application is installed on the phone (there are versions for Android, iOs, and Windows phone), which allows you to directly remotely control almost all parameters of the heating boiler.
The GSM heating control module is essentially a computer docked with external sensors and having the ability to change the operating modes of the heating system. Naturally, the module must be in the zone of reliable reception of mobile operators.

GSM heating control module can operate in several modes:

• automatic, when on signals from installed sensors the controller supports the given modes according to the given program;
• SMS heating control when the heating system is controlled by sending SMS. In this case, when new data arrives, for example, about the temperature in the room, the controller accepts them for execution and begins to automatically support them;
• warning, by sending alarm messages about the current state of the house (gas leak, break in the water supply system, etc.);
• remote control of other devices connected to the GSM module (watering, lighting, alarm, etc.).

GSM - heating control allows you to remotely:

• receive indoor temperature reports;
• receive notifications about the current state of heating equipment;
• change the operating mode of the system by raising or lowering the temperature, including separately in each room.

Heating control is not limited to these functions. In principle, any heating system can be turned into a remote one. To do this, it must have an automatic mode of operation, and a special GSM controller must be connected to it to control heating and communicate with the subscriber.

Remote control of the boiler using a set of equipment with an Internet gateway

Now consider the option of remote control of heating, if the country house or cottage has the Internet and, of course, a Wi-Fi router (aka a router).
Everything is much simpler here - you can see the capabilities of the devices proposed below and forever forget about worries about the state of the heating system in your home.

Salus IT500 provides control and adjustment of operation parameters in a maximum of two heating zones, for example, in the 1st room on the first floor of the cottage and the shower room on the second floor.
The kit includes an actuator (boiler receiver), a 2-channel room thermostat (weekly boiler programmer, boiler control panel) and an Internet gateway connected to an Internet router (router).

Possibilities of controlling the heating system using a set of equipment with the Salus iT500 Internet gateway:

• control of heating only modes (boiler and, if necessary, pump);
• management of several heating zones;
• management of heating and hot water supply of a country house.
• maintaining different temperatures in different rooms, timetable temperature conditions by days, hours and minutes
• 6 preset heating modes on delivery
• heating control hot water, automatic control modes, including energy-saving and vacation mode.
• a unique system for connecting devices via the Internet, providing reliable connection and control of the heating system: smartphone (or personal computer) -> Internet server -> router (router) -> thermostat -> receiver -> boiler

All equipment is wireless and communicates with each other via a radio channel, i.e. no need for padding electrical wiring. Room thermostat for a heating boiler it is programmed for daily, weekly or 5 + 2 operating modes. Displayed on the thermostat screen and in applications for remote control of heating current state boiler, current temperature and set temperature. Schedule setting can be done from the thermostat panel, web browser or mobile app.
The thermostat has modern design, is different high reliability and safety in its use.
With the use of additional equipment Salus Controls, it is possible to control, including remote, warm floors, gas and electric boilers, oil systems heating, as well as almost any other heating systems and appliances.
Remote management does not require a dedicated external IP address, the whole system works fine on any mobile internet(Yota, Megafon, Beeline, etc.), it is also possible to control from computers and mobile devices on Android and iOS operating systems.

What to do if there is no wired Internet in the house, but already purchased WiFi internet thermostat?

Most likely in the country there is coverage of mobile operators, isn't it? So you have internet! Just buy a Wi-Fi router with a USB port and in addition to it a 3G or 4G modem. Install a SIM card of any mobile operator in the modem that provides a reliable signal in the area where your home is located. You insert the modem itself into the USB connector of the router and that's it - now you have the opportunity to control the heating of the dacha remotely!

If for someone the iT500 seems expensive, the company offers more budget solution- internet thermostat Salus RT310i
The thermostat has somewhat reduced capabilities compared to the "big brother", but it may turn out to be worthy replacement, thanks to the lower price of the kit. Externally, the RT310i looks more modest compared to the first-class high-tech design of the iT500, it lacks touch controls, but the models are almost identical in functionality. Except that while the iT 500 is capable of controlling 2 heating or cooling zones, the RT310i can only control one zone.

Missing the features of the iT500? No problem - Salus iT600 can do it all and more!

If you do not have enough iT500 functionality to control only two heating zones, then on our website a more functional one is presented multizone(there are wired and wireless versions) system Salus iT 600 Smart Home. Well, something, and its capabilities for remote control of heating (and not only!) Will be enough even for the most demanding consumer!

iT 600 Smart Home combines the ability to control underfloor heating, remote control of heating using thermostats, single switching at the “smart home system” level, temperature change in each room using a smartphone with Internet access, control and management of any electrical appliances in the house, connecting sensors for opening windows and doors, and many other functionalities. The system was far ahead of not only its competitors in the field of remote heating control, but also set a trend in the field of automation and dispatching of engineering systems for many years to come!

For more information about the capabilities of the system, see the article:
Smart House. Heating control system SALUS iT600

Attention! The new line of Salus iT600 Smart Home products is already on sale!

Now you can not only remotely control heating, but also protect your home and control electrical appliances!

Now you have the opportunity buy Salus iT600 Smart Home- a new line of automation for the Smart Home!

This is the same complete system for remote control of heating via the Internet. iT600 plus additional features:

• using a universal internet gateway Smart Home UGE600, which now supports up to 100 ZigBee wireless devices and replaces last year's version Salus Gateway G30.
• control and management of various electrical appliances connected to Salus SPE600 smart sockets with the ability to account for consumed electricity
• connection and control burglar alarm with help wireless sensors opening doors or windows Salus OS600 Door Sensor
• managing your system just got easier, thanks to the new Salus Smart Home app for iOS and Android smartphones, whose interface and device registration have become much simpler and clearer!

All system components are wireless devices operating in the modern standard home network ZigBee, now you can create separate groups of devices that work in one bundle and which can be assigned individual tasks.

In the future, the company's engineers intend to expand the capabilities of the control system smart home, but already now you can buy Salus iT600 Smart Home, starting with the essentials, and build your Smart Home at a very attractive price!

And what about the owners of outdated heating systems?

Tech WiFi 8S can control the temperature in 8 rooms, each of which can have up to 6 thermal actuators!
In addition to controlling thermoelectric actuators, the controller can also control the boiler: when the set temperature is reached in all rooms, it will turn off the boiler using a “dry contact”.
Buy heating control system TECH WiFi-8S

Remote control of complex heating systems

The Polish company Tech Controllers, which produces a wide range of controllers with the possibility of remote control, is gaining an increasing share in this market segment.
By themselves, Tech controllers are multifunctional devices that are the main, basic part of the system, which can remotely control heating systems of almost any complexity using additional modules. There are a lot of possibilities, therefore, using an example, we will consider only the possibilities for remote control.

Tech Controllers Hardware Installation Example

In the photo for installation used:
1. Controller Tech ST-409n- a multifunctional device designed to control the central heating system, providing:
interaction with three wire room regulators
interaction with wireless room thermostat
smooth control of three mixing valves
DHW pump control
return temperature protection
weather control and weekly programming
the ability to connect the ST-65 GSM module for remote control of heating from a GSM smartphone
the ability to connect the ST-505 module, which allows remote control of the boiler via the Internet.
Possibility to control two auxiliary valves with additional modules ST-61v4 or ST-431 N
Control capability additional equipment, For example garage doors, lighting or sprinkler, etc.

Can be used for remote control various modules Tech, it all depends on the specific needs of the owner. For example:

What if the heating system is so individual that none of the above solutions can fully meet the needs of its owner to manage it?
There are no hopeless situations! Most often, the customer himself simply does not understand (and should not!) All the possibilities modern systems remote control heating. It is really difficult for an unprepared person to understand all this abundance of devices offered on the market, which are completely different from each other in terms of functionality, price, and, of course, quality. Yes, and installers, often, simply do not have an idea about the possibilities for controlling heating systems - their task is to mount the system, but how often you will run around the house (or to the boiler room) and turn various valves to ensure constant thermal comfort, they do not care . Our specialists more than once had to almost completely remake the "creations" of such craftsmen, and this, believe me, costs a lot of money. A miser pays twice... Contact us, we will consult for free, and if necessary, we will install a remote control system for heating, we will help with the selection of high-quality equipment at an affordable price.

The specialists of the company "Termogorod" Moscow will help you choose the right one, buy as well as install a remote heating control system, find an affordable solution. Feel free to ask any questions you may have, telephone consultation is absolutely free!
You will be satisfied cooperating with us!

Heating control systems have long been required attribute modern heating systems. After all, an automated heating control system allows us not only to save energy, but also greatly simplifies the management of the heating itself. With an automatic heating system, you no longer have to adjust the boiler temperature, adjust the radiator valves, adjust the hot water temperature - it will be done for you automatic system!

Controller, heating control unit

Let's get acquainted with the main elements of automatic control:

1. Heating control unit (controller) The controller is the main node automated system heating. He gives "orders" to all elements of automation and determines the cycles of their work. In addition, the GSM-Monitor kit can be connected to the controller, with the help of which the heating is remotely controlled using a gsm phone or the Internet. This allows you to change heating modes (by phone), keep a log of events (via the Internet), as well as receive SMS messages about "alarms" or malfunctions in the heating system.

2. Electric mixers. The mixer drive works in conjunction with a three-four-way mixer and controls the heating pump, which in turn is regulated either on-off or by reducing the circulation rate of the coolant.

3. Sensors. Sensors are different types. Some regulate the temperature of the boiler water depending on outdoor temperature(weather-compensated automatic), others allow you to configure room temperature according to the daily temperature chart or manual settings (room sensors), others turn on / off hot water pump(boiler thermostat).

To automate boiler plants, we use only proven and high-quality equipment: controllers and sensors from Honeywell (Germany) and Kromschroder (Germany), control servo drives and mixers from MUT (Italy-Czech Republic), circulation pumps"Grundfos" (Germany) and "Wilo" (Germany), as well as modular boilers and hydrocollectors "HydroLOGO" (Russia), as well as standard control systems supplied directly by manufacturers of boiler equipment Buderus (Germany) and Viessmann (Germany). We are often asked the question: "Is it possible to automate boilers that do not work on gas?". Yes, indeed, all automation schemes are being developed for gas boilers, but their use is also possible in liquid fuel boilers.

Below are some schemes for automating boiler plants:

Scheme 1. The selection of the coolant by each consumer occurs in the course of circulation of the coolant: first by high-temperature circuits (DHW and CO) and then by low-temperature circuits (TP). Heat extraction takes place under the control of the controller in accordance with the selected type of DHW priority and the settings for the heating circuits.

Scheme 2. The heat carrier circulates in the system under the action of the boiler pump (collector/ring). If there is no request for hot water heating in the storage boiler, the boiler valve is in such a state that the primary ring passes only through the boiler and both collector chambers. Heat extraction by pump-mixing groups of consumers occurs from the lower chamber of the collector. When there is a request for hot water production, the four-way rotary valve turns, extending the primary ring so that it already passes through the boiler heat exchanger. Heat is removed from the CH and TP under the control of the controller in accordance with the type of DHW priority selected during configuration.

Spend a couple of weekends in the winter in the country - what could be better if you want to take a break from the city noise and crowds? And to come to a country house, preheated to comfortable temperature, and even more so.

We have already written about why it is beneficial to use a starter for remote heating of a summer house controlled via a smartphone or tablet. Now let's talk about how to install it yourself. Don't worry, you won't need an electrician or mounting tools, no wires, no special technical knowledge. If you can program, say, a microwave oven with a delay timer, then you can easily handle the installation of the Switching Lite kit.

The included smart surface relays can be connected to electric heaters power up to 3 kW. They are enough to warm up the rooms. country house medium size in two to three hours. Ready to try? Begin!

Control scheme heating appliances via the Internet in a country house

Approximate connection time

Maximum 1 hour.

What will be required

Switching Lite Starter Kit

2. Internet connection and wifi router(not included). If your holiday village doesn't have a fixed internet connection, consider purchasing a mobile internet router with built-in Wi-Fi.

We start assembling a system for remote switching on electrical appliances via the Internet

1. Install on your smartphone or tablet free program Z-wave Home Mate.

For Apple mobile devices, it can be downloaded from itunes.apple.com, and for Android devices, from play.google.com. Owners android tablets Z-wave Home Mate version is suitable, for smartphone owners - Z-wave Home Mate (Phone).

1. Read the instructions for the mobile app, Z-Wave controller and relay carefully.

Instructions in Russian can be downloaded here:

It is more convenient to print these documents in advance so as not to read from the smartphone screen - your mobile device needed to make settings.

1. Connect the Z-Wave controller to the WiFi router.

The procedure is simple. In short, launch the mobile application, scan the QR code on your smartphone with your smartphone camera. back side controller and enter the factory password and username specified in the instructions. Then go to the device list screen and click on the name of the controller. See more details. It will help you get the job done faster.

Important! After connecting, be sure to change the factory password of the Z-Wave controller. Changing your password is a standard security procedure for any smart device connected to the Internet.

1. Connect the relay to the controller.

To do this, select the “Include device” item in the application: for 60 seconds, the controller will enter the search mode for a new device. Then plug the new relay into an outlet. The controller will detect it and add it to the network. The name of the relay will be displayed in the general list of connected devices. Try turning the relay on/off via the app.

Important! When adding a new device for the first time, the controller must be at a distance of no more than 1 m from it. After successful addition to the network, the relay can be connected to any outlet that is no more than 30 m away from the controller.

1. Connect heaters to smart relays and try to control them through the app.

Happened? Your system is ready to go! Now, when leaving home for a summer cottage, just run the program on your smartphone and remotely turn on the heating. In the application, you can program sockets so that they start and stop automatically at a given time.

You can connect not only heaters to smart sockets, but also other household electrical appliances. And most importantly, the Switching Lite kit will become the basis of your future smart home. Unlike devices that use to control mobile network GSM and SMS messages, the system based on Z-Wave technology is easy to expand. Just buy additional sensors for motion, temperature, opening and closing doors and windows, water leakage, alarms, etc. Moreover, you do not have to purchase a SIM card for each module, as required by GSM products. And the convenient and intuitive Z-wave Home Mate app will help you manage your smart home without any hassle.

Autonomous heating is an urgent need for owners country houses that do not have the ability to connect to the highway. Like any piece of equipment, it needs to be fine-tuned to achieve maximum operational efficiency. Modern technologies allow you to install the heating control unit of a private house remotely, using a cell phone, the Internet and other communication methods. This approach makes it possible to receive timely notifications of the occurrence emergency, remotely issue commands to shut down the system, adjust the temperature by sending messages in accordance with their own requirements.

Basic working principle

The main detail in the whole scheme is an electronic control unit, which provides slots for installing standard SIM cards for cellular communication. More technological modifications also have a connector where an electronic Internet cable is connected. Similarly, temperature sensors, pressure indicators, fire alarms and other security systems are connected to this module. Of course, to ensure feedback and the unit itself must be connected to the heating boiler.

The heating control of a country house is carried out according to a simple, in general, scheme. The initial adjustment of the functioning is carried out, after which the central processor fixes in the memory the correct operating conditions of the system. If one of the connected sensors sends a signal about a change in these conditions, for example, the temperature starts to drop, a text message is sent to cellular telephone owner. The owner, in turn, can request the readings of other sensors in order to more fully assess the situation, send a response command with a text message to turn off the devices or continue working as usual.

The heating control system can also be based on communication through the use of the Internet. To do this, on a cell phone with access to the global network, you must first install a special application that demonstrates all the current system parameters in real time.

Tangible benefits

Consider a few situations in which the scheme is guaranteed to be useful:

• You return to the cottage from a week-long business trip or vacation, during all this time no one lived there. On the way from the airport, you send a text message, send a signal to start heating. By your arrival, the microclimate in all rooms will be as comfortable and pleasant as possible.
• You set the boiler to an economical mode, which excludes freezing of the coolant in the pipes, and leave. Unexpectedly, a failure occurs, the coolant cools rapidly, the module detects an accident, sends you a message. You, in turn, send a response command to restart the boiler. If this measure does not bring results, it is worth calling the emergency service. This method eliminates the possibility of freezing of the coolant in the pipes, which will inevitably lead to a rupture and huge financial costs for restoration.
• If you want to know the current situation in the house, send the appropriate command. The response message contains information about the air temperature in the controlled premises, the level of humidity, and the current temperature of the system coolant.
• A dangerous situation arose with the gas boiler: the fuel supply circuit was depressurized, there is a high concentration of the composition. reply message heating system translated into backup source energy, the problem is eliminated by specialized services.

Set of modules and installation features

Heating control in a country house according to the GSM standard requires the following elements:

• A unit equipped with slots for installing cellular cards and power cables.
• Auxiliary remote antenna that improves signal quality.
• An integrated battery that maintains the device's performance when the centralized power supply is turned off. Please note that with autonomous power supply, the functionality. For example, the unit will not be able to signal a restart gas boiler, for this there is simply not enough voltage. The built-in battery should last approximately 3 days of operation. Many models require the connection of an additional power source.
• temperature sensors. In most cases, their maximum number is limited to five.
• Additional security and fire alarm, clamps of breakthroughs of water supply, unauthorized opening of windows and doors.

Thus, not just a heating control system, but a full-fledged security complex can be formed in the house.

If we talk about the nuances of installation, then there are no particular difficulties. All devices are fixed as easily as possible. To eliminate the possibility of failure, we recommend mounting the control unit in a room where the most stable and clear cellular network signal is recorded. It is also worth contacting the operator so that advertising messages from unknown numbers do not come to the SIM card in the block, such interference often causes failures.

Functionality

The minimum set of functions that control and configure the heating system high-rise building, is as follows:

• Setting the air temperature in the premises and the temperature of the coolant;
• Formation of a text report indicating all operating parameters and further sending to the owner's phone;
• Determination of voltage stability in the home power network;
• Control of devices in case of an emergency, including emergency shutdown of the boiler;
• Maintaining the temperature in the premises at a given level, its remote adjustment.

Additional functionality depends on the exact model of the automation unit, a set of connected sensors. Practice shows that the following functions are most useful:

• Control over pressure and fuel level in diesel and wood-burning devices;
• Tracking unauthorized access;
• Activation of a fire alarm in the event of an open fire, smoke, a sharp increase in temperature;
• Leak tracking.

Please note that some blocks involve communication not with one number, but with nine at once, they are designed for storey buildings.

Summarize

It turns out that the automation of the heating system is a profitable and justified solution from all sides. The efficiency of operation increases, the risk of an emergency situation is eliminated, the comfort of living reaches maximum level. With all these advantages, the cost of setting up such a system is democratic, the devices will pay off in just a season or two!

Modern means of communication make it possible to implement many ideas that in the recent past were perceived as fantastic. And if earlier the remote control of the heating of a country house seemed like such a project, now it is a really working system that allows you to remotely change its mode of operation in accordance with the current situation. What is needed for this, and how can such a heating mode be implemented?

Which heating system can be controlled remotely?

Heating systems themselves have changed a lot over the past time. Now in country houses most often there are two-pipe systems in which forced circulation is carried out. A special pump pumps the coolant throughout the entire volume, and thanks to the distributor comb, it can be supplied to almost every heater.

In such a system, increased pressure is created, and to protect it from destruction in unforeseen situations, there is a heating safety unit, or a safety group for heating is specially installed. In cases where the pressure exceeds the critical one, the safety valve, the risk of damage to the heating system is removed and it can continue to operate normally.

These two factors - the possibility of coolant supply to any heating device and the heating system security unit can be considered the main ones in order to implement remote control of heating.

Of course, you also need equipment that can control all the work, sensors, special valves and devices for adjusting the coolant, combining various devices into an information network, and nevertheless, the described system will be the most suitable for this.

How remote controlled heating works

Remote control of heating in a country house allows you to implement, for example, operating modes:

• general, when the set temperature is maintained throughout the house;
• zonal, in this case, in different rooms there may be an individual temperature;
• temporary, with it at different times during the day, the house can maintain its own thermal regime, for example, in the absence of residents in the house it will be colder.

Remote heating control means that any of these modes, as well as specific room temperatures, are changed using mobile communications, or heating is controlled via the Internet. For example, when you leave home as needed, you set the economy mode when the temperature in it is maintained at minimum value. Returning in the evening, you do not expect guests, which means that it will be enough to provide heat only in certain rooms, and leave everything unchanged in the rest. All this allows you to implement a remote control heating system.

And why is it needed at all?

First of all, it creates additional comfort. So, remote activation heating in a country house or in a private house will be able to provide the desired temperature by your arrival, as described in the example above. Another advantage of this approach is:

• additional savings in heating costs, sometimes reaching fifty percent, due to the operation of heating in an economical mode in the absence of residents of the house;
• increase in the service life of equipment, provided by its operation at reduced load.

Controlling the heating system with a mobile phone

In addition, it should be taken into account that for engineering systems, the development trend is their integration into a single network, which makes it possible to reduce total costs for the upkeep of the house. So, the security system for heating in the presence of free control channels and the corresponding software may additionally perform other functions, for example, enable or disable irrigation in the greenhouse.

The work of various engineering systems in a single network expands the tasks intended for the successful functioning of the house as a whole.

The safety group for the heating system, which currently monitors the pressure value, can be additionally equipped with appropriate sensors and actuators, and Fire safety heating systems can be provided by such a system.

Well, do not forget that this approach is part of the ideology of creating a "smart home", which implies the further development of all engineering systems.

Remote control of various engineering systems, including heating, should be considered as their further development. The purpose of its implementation is to ensure ease of use and create living conditions that are most appropriate to individual needs and circumstances.