Panel heating electric ceramic. Ceramic panel heaters: how do they save on heating? Existing varieties of electric room heaters

Finding the right heater for some can be a real challenge. A wide range of such equipment is on sale. Each device has certain advantages and disadvantages. today they are considered one of the best options for creating full-fledged heating in a private house or apartment. User reviews will help you understand how the presented devices behave in everyday life.

general characteristics

A number of distinguishing features are ceramic panel. Heater This type combines a convector and an infrared electrical appliance. The heating element in this design is located between the rear and front panels. Design features contribute to the rapid heat transfer of the material.

The front panel is made of glass ceramics. This material is known for its high heat dissipation. When the heating element is turned on, very little time passes until the front smooth surface of the heater reaches the set temperature. The radiator in this case performs the function of an emitter of infrared rays.

The back side of such a heater has a layer of insulation. This material accumulates thermal energy, increasing the efficiency of the heater. It reflects the heated flows into the room, but at the same time acts on the principle of convection.

Varieties

There may be several types. There are wall, floor heating devices, as well as equipment that can be installed on a table or cabinet.

Almost all ceramic wall panels are large when compared with other types of heaters. However, their appearance is aesthetic. Good ergonomics allow them to fit into almost any type of interior. It is best to install them on flat surfaces.

All ceramic panels require installation close to the floor. At the same time, the maximum effect from their use is achieved. Floor models often have the ability to rotate. This allows you to direct the heated air in different directions.

The smallest devices are desktop ceramic heaters. They have a stylish look. Such devices can also be rotated.

Specifications

Differ in the increased energy efficiency. Their distinguishing feature is thermal power. When installing a conventional radiator, the standard value of electricity consumption is 100 W / m². A ceramic heater is able to fully heat the room at a standard of 50 W / m². This indicates that the costs of the owners of such equipment for energy resources will be 2 times less.

The energy consumption of the ceramic panel per hour is 375 W when heated to 80 ºС. The size of such equipment is 60x60x12 cm. For comparison, an oil convector consumes 1.5-2 kW per hour of continuous operation at the same heating level. The presented ceramic panel can independently heat a room with an area of ​​10m².

At the same time, such devices will not dry the air in the room. This will avoid purchasing an additional humidifier. White ceramic panels are usually on sale, but there are other colors. They are ordered directly from suppliers.

Reviews about ceramic panels

Ceramic panel reviews about which users provide is known for its positive qualities. Many owners note that this is one of the best types of heating appliances. Such panels consume much less electricity than other types of heating equipment. In this case, the heating of the room occurs much faster.

Panels are compact. Manufacturers offer various ways to install such equipment. Everyone can choose the best option for themselves. The stylish design of the front panel allows the device to harmoniously fit into the interior.

In addition, there is a high level of safety of such devices. They are allowed to be installed even in children's institutions. No noise is heard during operation. Also panels do not emit a smell, are made of environmentally friendly materials. The presence of a thermostat allows you to configure the optimal mode of operation of such equipment. The service life of ceramic heaters, according to experts and users, is about 30 years.

Safety and environmental friendliness

They are safe in all respects. Its front surface does not heat up to such a temperature that, if accidentally touched, a burn remains on the skin. There are practically no protruding parts in the design. Therefore, this form is considered safe even for small children.

The device does not fail if dust, water or dirt accumulates inside. They can be installed in showers, bathrooms and baths. Also, with power surges, the electrical part will not break. In such devices, a special protection system is provided.

The environmental friendliness of the heater is ensured by the absence of interaction between the heating elements and the air in the room. This ensures that oxygen is not burned off and the microclimate in the room remains healthy. When working in the environment, no substances harmful to health are emitted, there is no smell. Therefore, such devices are suitable even for people with respiratory diseases, allergies.

Weight and compactness

Ceramic heating panels may have different dimensions. However, whatever type of device is chosen by the buyer, such a device will be much lighter than a similar oil heater. This is a great advantage in installation and operation. If the panel needs to be moved from one room to another, almost anyone can do it.

The compactness of ceramic models simplifies the issue of choosing an installation site. They will harmoniously look both under the window and in the center of the room. Some types of devices can be installed on the table. In this case, the user will warm up much faster if he is near this equipment.

Gas ceramic heater

Exist ceramic panels, which are heated not by electricity, but by gas. In some homes, this is an advantage. If you need to heat a country house in the village, or a warehouse, you can purchase similar equipment. In this case, heating the room will be cheaper.

For such a ceramic panel, a separate gas cylinder is purchased. There will be no flame during operation of the device. However, the ceramic surface can get very hot. Such devices should not be left unattended, let small children near them.

On a hike, such a heater will allow you to cook food on the panel. Therefore, such a technique is in demand today.

Equipment selection

Choosing ceramic panels, you should give preference to trusted manufacturers. Cheap types of equipment often quickly become unusable. You should also purchase ceramic heaters from conscientious sellers. They can provide all the necessary documentation on the conformity of the quality of the device to the stated requirements.

The cost of panels may be slightly higher than that of other heating devices. However, low power consumption, long service life and many other advantages make such an acquisition profitable.

Having considered ceramic panels, as well as user reviews about the features of the operation of such equipment, we can conclude that this is high-quality, efficient equipment.

These are the most popular heating systems today, which work by emitting infrared radiation. According to manufacturers, and even reading customer reviews, it becomes clear that infrared wall-mounted heaters are safe to use, are available with various fastening systems, and are diverse in size and design solutions.

Principle of operation

Infrared heaters work according to a certain mechanism, thanks to which they are able to emit infrared radiation. Such radiation is called nothing more than electromagnetic waves (the spectral region between the radiation of a microwave and the final wave of visible light), capable of generating heat. Heating panels emit infrared rays (thermal waves) that are absorbed by various surfaces of the room (from the ceiling and floor, to furniture and decor items). Then, objects that have received infrared radiation emit heat, which enters the airspace of the room. This method of heating creates a thermal effect that is as close as possible to the natural, occurring in nature (solar energy).

A huge plus of infrared heaters is that, unlike the usual heating systems, heat is released here, which is not absorbed by the air. Like light, infrared rays penetrate all kinds of surfaces, including human skin, from where a feeling of warmth appears.

Infrared rays are able to equalize the average temperature of the air without drying it out, and greatly reduce energy consumption. Such heating is considered much more economical than the one we are used to using (fireplaces, convectors, etc.), user reviews in this direction are only the most positive and pleasant.

Varieties of heaters

Infrared heating systems differ in many respects, one of which is the installation method and the mounting system:

1. Wall heaters
2. Floor heaters
3. Heaters with open and closed heater
4. Window heaters (moldings)

Each of the heating elements is used in certain conditions. For example, if the room is small, with low ceilings, then it is best to choose heaters that emit heat at low temperatures. In a large room, it is more important to use heaters with open heating elements that are capable of generating powerful heat flows.
Infrared heaters can be used as separate elements of heating systems, or in conjunction with any other additional devices (warm skirting boards, ceiling heaters, radiators, etc.). According to customer reviews, wall panels are the most in demand and easy to use, why exactly they are - we will analyze in the next paragraph.

Wall-mounted infrared heating panels

Most often, wall-mounted heating panels are installed on the side of windows (under them), radiant infrared panels are used in heating:

1. Residential premises (apartments, cottages, houses, etc.);
2. Warehouse and production sites;
3. Agricultural premises for a specific purpose (livestock farms, greenhouses, warehouses for the storage of agricultural crops, etc.);
4. Special purpose institutions (schools, hospitals, theaters, etc.).

A particularly important indicator of infrared heating panels is that they are made (mainly) from natural natural materials (glass and film), and the heat obtained through their work is not only absolutely harmless, it can have a beneficial effect on the entire human body.

The undoubted advantage of such heaters is that their heating element does not have a limited service life, which is why they are very durable, and, accordingly, economical.

As for the appearance, here users are offered a huge choice, from classic models, in a modest and seasoned style, to making heaters in various shapes and colors. The latest developments of infrared wall film panels made in the form of paintings began to be in great demand.

Film wall infrared heating panels-paintings

These are some of the newest developments in heaters that convert electrical energy into pleasant heat, close to solar. The design of such a heater is extremely simple - it consists of two films soldered together, the length of which is 1 m, and the width is 0.6 m, they are mounted on the wall.

Thanks to the built-in carbon filament, electricity is converted into infrared radiation (heat). The heater begins to fill the room with heat after its surface warms up (up to 70 degrees on average). The temperature in the room rises due to the fact that the interior items are warming up, and the entire air space of the room in particular. Film infrared panels have remarkable qualities:

1. Easy to use, as they work silently, continuously, without interruption. They are equipped with thermostats that allow you to control voltage drops and turn off the heater in case of overheating. In some models there is protection against moisture, which allows them to be installed even in bathrooms and showers.
2. Affordable and economical, as they consume a minimum of electricity (0.4 kW), and the main heating element has practically no final service life.
3. Good for health, as they do not burn oxygen out of the air. They keep the humidity of the air constant, necessary for human life, without drying it (because the maximum temperature emitted by the canvas cannot exceed 70 degrees).
4. Various designs are made, for example, in the form of paintings, there are various colors, sizes, etc. Most often, the surface of the heating panels is made of wood, which gives the device solidity and aesthetics.
5. Safe and harmless to humans, equipped with an electric shock protection system (class 2 according to GOST), exclude the possibility of getting burned.
6. Easy to carry and do not take up much space (weight up to 1 kg), simple installation system, can be folded to move.

Using an infrared heating panel, you provide yourself with comfort, natural warmth and great well-being. At the same time, you get a great addition in the form of a beautiful picture to your design and save your own savings.

Fixing system and correct placement of heating wall panels

When buying infrared panels, you should remember that they must comply with several rules.

1. First, in order for the air to circulate freely throughout the room, there must be some space around the heater.
2. Secondly, they cannot be covered, installed in closed small spaces.
3. And, thirdly, you need to fix the purchased wall heating panels only with those mounting and fasteners that the device itself is equipped with, i.e. they come in a set (set) with panels. They must be placed only in a vertical position, on the walls, and not on the floor or ceiling.

If the device is correctly located and not damaged during installation, then your home will have a constant, pleasant environment for life and the necessary air temperature.

Use and acquisition

As you already understood, infrared heating panels can be used anywhere, whether it is your home or cottage, or office or trade pavilion. But the acquisition of the device must be treated carefully and carefully. On the Internet you can find many sites offering to purchase the latest developments in heating systems. Before deciding to buy - look for reviews of those who already use miracle devices, ask where they purchased them.

Moreover, guided by the reviews of real people, you can choose the model of the infrared wall panel that will suit you best. The same reviews can be useful as tips for operation, installation, etc. It is also important to read all the technical characteristics and design features of your future purchase, because the reviews may not contain accurate data, we are all people - we can all make mistakes. Be careful in your purchases and provide yourself with the most comfortable conditions with infrared heaters.

The summer season is unfairly short. As soon as the chilling breath of autumn is felt outside the window, there is a need to heat your home. One of the convenient, fast and low-cost options is to purchase a compact, efficient heating device. Before making a choice, it is worthwhile to figure out what wall-mounted energy-saving heaters for the home are, find out their functions and capabilities, evaluate the advantages and disadvantages of each type.

Wall mounted energy saving

Wall-mounted energy-saving heaters for the home: advantages and types of appliances

Despite the fact that many have long abandoned centralized heating services in favor of autonomous heating, mobile heaters for a house or apartment are still in demand. After all, it is often necessary to fill the house with warmth on days when the cold suddenly returns, and it is simply irrational to start the entire heating system. It is then that compact electric heaters can be used to make up for the lack of heat.

Electric wall heaters: advantages and types of appliances

Modern household electric heaters are characterized by efficient use of electricity, converting it into heat by more than 90%. That is why such devices are energy-saving. Manufacturers of climate equipment, improving their models, increase not only their technical and operational characteristics. Massive outdoor heaters have been replaced by wall-mounted counterparts, which are distinguished by their practicality, compactness and aesthetically attractive appearance.

Wall-mounted heaters for the home use a variety of heating methods, taking into account the possibility of regulation, control and safe use. Given a number of criteria, heaters are divided into types.

Depending on the heating method:

• convection - the room is heated by the movement of the air flow passing through the heating element;
• infrared - heating occurs due to thermal radiation.

Heating element configuration:

• tubular heating lamps;
• panel;
• film.

Given the possibility of controlling the temperature of the device:

• with thermostat;
• without control function.

Dozens of models of electric heaters from different manufacturers are on sale. After reviewing and weighing the strengths and weaknesses of each type of energy-saving heaters, you can opt for specific equipment. What unites wall-mounted heating devices is that they do not take up much space, and some of them can also act as an original decor.

The specifics of wall-mounted electric heaters with a thermostat

When choosing wall heaters, you should pay attention to the presence of a thermostat in their design. This device controls the operation of the appliance, saving energy. Due to the fact that the thermostat is equipped with a temperature sensor, it automatically turns on and off the heating depending on the set value. Some devices have a sensitivity threshold that reaches a tenth of a degree.

Some models of heaters are equipped with an on / off timer, which allows you to program the heater to start or end operation. It is possible to set the equipment to turn on when you come home from work, or set a lower power at night and then increase it in the morning. The difference in the cost of devices identical in power with and without a timer is up to 30 USD.

There are two types of thermostats: mechanical and electronic thermostat. If there are frequent voltage drops in the house, it is recommended to use a mechanical option. If the voltage is stable, you can buy a wall-mounted heater with an electronic thermostat. Such heaters will work automatically, without causing trouble to residents.

There are models of heaters not only with thermostats, but also with overheating protection systems, a light indicator and an operating mode switch within several positions. Such equipment will be quite convenient when there is a need to select the power of the heater: for example, in severe frosts, you can select the operating mode at full power or, conversely, when the temperature outside the window is not too low, select a lower degree of intensity.

Functions of Quartz Wall Mounted Energy Saving Heaters for Home

The heating of the room occurs due to the convection of air, which rises at the same time. Thus, due to circulation, after a certain time, the air temperature equalizes. It should be noted that the heating temperature of the convector body is above 60ºС, which makes them completely safe and suitable for placement in children's playrooms.

Wall convectors are very easy to attach to the wall, but they also come with legs, so that if desired, they can be installed on the floor. To achieve the economic effect allow thermostats that carry out the necessary temperature control. Thermoregulators are mechanical or electronic, the latter maintain a given level of heat more accurately.

Related article:

Advantages, characteristics of different models. How to choose an economical heater. Types of heaters. Comparison of prices and manufacturers.

By design, convector heaters are divided into devices with a closed and open spiral and monoblock. I would like to note that the cost of heaters with an open filament is much cheaper, however, they dry the air in the room. Devices where heating elements are used almost do not change the humidity of the room, but they can burn the dust accumulated on the heating element. It is recommended to clean them from dust from time to time.

For rooms where constant use of convectors is planned, monoblock devices are the most suitable. The heating element in them is reliably protected by a special filler, which creates safe heating. Such devices are distinguished by long-term operation.

Useful advice! For safe heating, choose models of electric convectors equipped with ionizers and air purifiers.

Ceramic heaters

Ceramic wall heaters are similar in principle to convection heaters, since heating is carried out by convection: warm air rises, and cold air descends for further heating. However, infrared radiation, which forms a ceramic plate, is added to the action of such devices. Their main advantages include:

• efficiency of the equipment;
• safety of use;
• compactness and easy installation;
• silent operation;
• equipment management;
• varied design.

The natural material of the ceramic plates has unique properties that are excellent for heat storage. Ceramics is resistant to temperature changes and does not collapse as a result of such exposure. Having a low coefficient of expansion, good thermal conductivity and resistance to mechanical stress, such a material is the best suited for use in electric heaters.

Ceramic wall heaters have an excellent stylish design and can be made in various colors. Unlike convectors, ceramic plates heat rooms with high ceilings well. The operation of such heaters is not accompanied by noise and high heating of the plates, they do not dry the air and create comfortable soft heat. The disadvantages include only a decent weight of heaters.

All models are supplied with the built-in electronic temperature regulator. Devices made in the form of thin glossy panels can decorate any interior. Ceramic infrared heaters are installed directly under the ceiling. For the convenience of controlling the functioning of such panels, remote controls are attached to them.

Which wall heater to buy: ceramic or convector?

When choosing a wall-mounted heater for the home, it is worth considering a number of factors, among which are the technical characteristics, the efficiency of the device, the availability of additional options, the manufacturer and the cost of the equipment. Comparing convection and ceramic heaters, it is worth noting that convectors are ineffective for rooms with high ceilings.

If you plan to use electric heaters on an ongoing basis, then you should choose more powerful models equipped with heat sensors, timers and other functions. This will increase the efficiency of the entire heating system and ensure rational energy consumption. When choosing the latest ceramic plates, it is worth considering that the cost of a 12 sq.m heating panel can be about 5,000 rubles, and maybe even higher, depending on the manufacturer.

If the function of the electric heater will include short-term additional heating, convector models with an open coil can be purchased. They are cheap and can be used for local heating. From the point of view of safety, convector monoblock heaters are in the lead, which can be operated, including in rooms where there are children. The case of the device does not heat up to a high temperature.

In addition to the characteristics and advantages presented by manufacturers and distributors of wall heaters, it is worth asking about customer reviews. A large number of positive ratings for the models of a particular company can serve as a sure guide when choosing a heating device.

Models of wall-mounted infrared heaters for the home

The principle of operation of a wall-mounted infrared heater for the home is identical to solar radiation, when heat rays are absorbed by objects and surfaces, and then transfer heat to the surrounding air. Thanks to this, on the one hand, certain zones are quickly heated when the device is turned on, and on the other hand, the heat flow is instantly stopped if it is turned off.

Due to the fact that the radiation is not absorbed by the air, all the energy of the device is converted into heat with virtually no loss. It should be noted that at the same time, the level of humidity in the room does not change, and the air does not become dry, and the advantages include absolutely silent operation of the device. By design, infrared heaters can be case, panel, film or lamp.

Flexible wall heaters

One of the thinnest infrared heaters is a flexible wall heater. It is made of two layers of polyester film and a heating element made of thin (about 1.5 mm) carbon fiber. The thickness of such a heating device allows you to twist it into a roll during transportation or storage.

The main advantages of such models are:

• light weight - usually they weigh no more than 1 kg and can be attached to absolutely any surface;
• versatility - the device can be used, including for small bathrooms with a high degree of humidity;
• low energy consumption - the cost of local heating in the range of 3 m is 0.08 rubles. for one hour of work;
• maintaining the natural climatic properties of the room - you do not have to experience discomfort from a lack of oxygen;
• therapeutic effect - the soft heat of the heater has healing properties;
• compactness - almost does not take up space during installation and transportation.

Technical parameters of flexible electric wall heaters: electrical protection class II (DSTU 3135.0-95), operating power - 220V, power consumption - 400 W, and the temperature of the working surface - 75ºС.

Useful advice!Do not cover the film heater with bedding or other things, this can cause its deformation and failure.

A special place in the "family" of electric film wall heaters is occupied by models made in the form of paintings or panels. Such a design technique makes it possible to purchase a device that will logically fit into the interior of any style. Difficulty will cause only the difficulty of choosing among a huge range of thematic options.

Where to buy film heaters "wall panels"

Heating panels, in addition to the function of heating, carry a decorative component. A variety of plots allows you to choose a "warm" decor for rooms for various purposes. For a children's room, panels depicting favorite characters from fairy tales and cartoons are suitable, for a bedroom - romantic landscapes, a magnificent waterfall will look great in the living room, and for the kitchen, the place is for still life.

It is most convenient to buy a flexible wall heater through an online store. Firstly, there is an opportunity to carefully study the technical parameters, secondly, you can slowly choose the plot of the panel you like, and thirdly, you can compare the level of prices for heaters depending on the manufacturer. In addition, visiting online distributors, you will always be aware of ongoing promotions and sales.

The main technical characteristics and estimated prices of wall-mounted electric heaters in the form of panels from different manufacturers.

It is worth noting that some manufacturers, when presenting their products, do not exclude the possibility of using film heaters for drying fruits and vegetables, which will greatly help housewives in the kitchen when preparing food. Considering the comfort of transportation, many people take panel heaters with them to their country house in early spring or cool autumn.

How to order and buy a wall-mounted electric heater in the form of a picture

Using energy-saving wall-mounted heaters in the form of a picture in the interior, in addition to economic benefits, you can achieve an excellent aesthetic effect. Having placed it near a cozy sofa or an easy chair, you can simultaneously warm up on a cold evening and enjoy the beautiful scenery. After turning off the device, objects heated by infrared radiation will give off heat for some time.

Having bought a wall-mounted film heater-picture, you can solve the issue of “beautiful” heating of a balcony or loggia, veranda or summer kitchen, garage or cottage during the off-season. Light weight, easy to carry and a quick set of working heat (within 30 seconds) will allow you to feel comfortable warmth immediately after connecting the device to the network.

Like most household appliances, you can choose, order and buy wall-mounted picture heaters on manufacturers' websites or in online stores. Product catalogs contain the necessary information about the technical parameters of each product and are accompanied by photos of electric wall heaters. A thorough preliminary review of the options will greatly simplify the choice.

Before you call the manager of the online store and place an order for the model you like, you need to make a comparative analysis of the prices of wall-mounted film heaters. Customer reviews at the stage of choosing heating equipment will help you understand its characteristics and avoid purchasing low-quality goods.

Useful advice! Give preference to well-known brands: even if you have to overpay for a brand, a guarantee of durability and quality of the device will be provided.

The approximate cost of heaters in the form of pictures produced by different companies:

Wall-mounted electric heaters: consumer reviews

When visiting online stores selling wall heaters, before ordering, you should read customer reviews, because this can protect you from buying a device that does not match your room in terms of power or does not have proper protection against overheating and can harm the child.

Here are some of them:

“The windows of our apartment face the north side. In severe frosts, central heating is not enough for a comfortable temperature. We decided to purchase a model of a ceramic electric heater NVA. The compact size device turned out to be quite good in terms of power. Perfectly complements the heating of a small bedroom of 15 sq.m. We want to buy this type of heater for the bathroom in the future so that we can quickly dry the laundry.”

Natalia, Tomsk

“I have long wanted to buy a wall heater for the children's room. I liked the Polaris remote control models. The heater with stylish design works silently. The room began to warm up quickly. In addition, there is a built-in timer, thanks to which you can set various operating modes. They were very satisfied."

Svetlana Trofimova, Tambov

“We have a very cozy office, but it is very cold at work in winter. Either the radiators are clogged, or the heating is weak. The whole team looked after a wall-mounted infrared heater in the form of a beautiful painting “Velvet Season”. The workplace quickly heats up within a radius of 4 m, and the beautiful mountain landscape calms and relieves stress. Everyone is happy. Doesn't use much electricity."

Galina, Voronezh

Vadim, Penza

After reviewing the properties and characteristics of modern wall heaters, as well as carefully studying consumer reviews, you can make the right choice of a device that is suitable for your home.

Most traditional home heating systems and space heaters use thermal energy to heat air, which also heats objects. However, infrared heating panels differ from them in that they are able to convert electrical energy into heat. The heat generated by these panels resembles the heat coming from natural sources such as the sun's rays, a fire or a fireplace, and this contributes to a more comfortable atmosphere.

Today we will talk about the features and benefits of infrared heating using special stoves. In addition, you will read the reviews of those who have installed similar heating systems at home.

The principle of operation of infrared heating stoves

As you know, the area of ​​heated surfaces significantly exceeds the dimensions of conventional heating devices. Infrared stoves can heat a room four times faster than conventional appliances due to the fact that the surfaces absorb infrared rays well.

The rays from the plates are best directed at furniture, which, after being absorbed, could act as a source of heat. And to prevent heat seeping into the street, do not direct the rays of the heat source to such surfaces:

• walls;
• ceilings;
• doors;
• window.

Among other things, infrared heaters, unlike conventional ones, do not absorb oxygen. They are great suitable for heating the following rooms:

• apartments;
• private houses;
• retail space;
• office space;
• industrial premises with high ceilings;
• storage facilities;
• open areas, etc.

Advantages of infrared heating stoves

Infrared heating stoves have the following main advantages compared to traditional heating systems:

• rooms can be heated up to 50 degrees;
• the ability to maintain optimal levels of temperature and humidity;
• lack of convection air currents that raise dust.

Infrared type of heating can be installed in different ways, it can be either primary or secondary paired with another type. To choose the most suitable type of heating for your home, you need to take into account the heating system you already have, the materials from which the house is built, and much more.

According to customer reviews, main characteristics, by which they choose these heating devices, are as follows:

• the presence of a thermostat that allows you to maintain a certain mode and save electricity;
• achieving a minimum difference between the air temperature on the ceiling and on the floor during heating;
• lack of pipes, radiators and boilers;
• the ability to place the panel both on the ceiling and on the wall, the effect will be the same;
• the possibility of laying tiles or drywall on top of the panels and even wallpapering on top;
• the service life of infrared devices reaches 50 years;
• high level of fire safety;
• environmental friendliness of the device.

Classification of infrared panels

Infrared panels are two main types:

• mounted. Such panels most often have a colored metal case, which is heated by an infrared emitter. The device is connected through a socket and can be placed both separately and attached to the wall;
• built-in. The basis of such a panel consists of drywall, it contains two layers of emitter and insulation. At the top is an IR emitter in the form of a carbon conductive thread, and on top of it is a protective polymer coating. The panel is connected to a network of 220 V.

There are also designer wall panels, which are presented in different sizes and colors. In addition, you can purchase a panel in the form of a plinth, which is attached around the perimeter of the premises instead of the usual one.

If you finish the walls with drywall, the wall type of heating can be used as the main one. When you have another type of heating in your home, such as a solid or liquid fuel source, infrared panels can serve as a backup heating source.

However, along with the positive characteristics, this The system also has its drawbacks., which are often mentioned in customer reviews:

• the heat from the rays is felt quickly, however, the action of the infrared heater is too pinpoint. It will be very hot in one place and cold in another;
• if the heat affects the human body unevenly, he will suffer from headaches and complain of constant fatigue;
• infrared stoves do not heat the air, but objects, sometimes because of this, the smell of plastic may appear if they are directed to appliances;
• the power of the device is at the level of about 1200 W, but at the same time it can heat a room up to 8 square meters;
• Infrared rays can adversely affect vision.

Features of the use of film infrared heating

The main feature of film-type infrared heating is that it does not need to transport heat from its source, which sometimes provokes its loss. Also film can be placed anywhere: even on the floor, even on the wall or even on the ceiling. Moreover, if the film is placed on the ceiling, it will occupy about two-thirds of its area, and this will allow heating the room more evenly. If desired, the film can be equipped with decor.

However, never install an infrared heating source under PVC or fabric stretch ceilings.

Above the film, you should first put a plasterboard frame, and the decorative finish should not contain metal.

Such a system has the following advantages:

• the only communication necessary is electricity;
• no need to purchase boilers and the availability of additional premises for the installation of the system;
• the system does not freeze;
• the ability to quickly reinstall everything in another place;
• no need for regular service maintenance of the system, ease of use;
• no noise and combustion products;
• the system does not suffer from voltage drops;
• service life (up to 20 years).

However, film infrared heating also has a significant drawback: it is quite energy intensive and will require significant electricity costs.

Other types of infrared heating

Sources of infrared heating ceiling type quite economical and can be installed in rooms with a ceiling height of three meters. In addition, they work without noise, can warm up a certain area of ​​the room, are environmentally friendly and convenient in terms of installation and subsequent operation.

For suspended ceilings, some manufacturers of infrared heating have provided special cassette-type heaters that are mounted in the ceiling.

However, along with the high consumption of electricity, ceiling-mounted infrared heaters have another drawback, this time of an aesthetic nature: they are far from always easily combined in terms of style with the overall interior design.

A wall mounted infrared panels are a good alternative traditional radiators. They have a small thickness, can be of different sizes and are easy to install with your own hands.

Where is the best place to put an infrared heater

Overview of infrared panels STEP

What range of STEP electric heating panels does Softterm produce?
The following range of heaters is manufactured at the plant: STEP infrared heaters, STEP2 infrared heaters, STEP ceiling infrared heaters, STEP wood-effect infrared heaters, STEP infrared floor heaters, STEP interior heaters, STEP infrared industrial heaters, STEP infrared plinth heater.

What are STEP heaters used for?
STEP infrared panels are used for the main or additional heating of various premises, such as an apartment, office, country house, bathroom, and various children's institutions. Also often used to prevent night frosts in greenhouses. Due to the wide range of heaters, you can choose almost any room.

Where can I buy cheap energy-saving STEP panels in Moscow?
On the official website of our "Greem You" store, STEP heaters are presented, which are manufactured by Softterm. We also have a store located at Volgogradsky Prospekt 32 building 8, Technohall shopping center, floor 2, pavilion D-30, where you can see the panels in operation and buy at a bargain price.

What range of STEP heaters is presented on your website?
The following models of STEP electric energy-saving panels are presented on our website: infrared heater STEP 800 1.80/0.59 white and light wood, STEP 500 1.40/0.70 white and light wood, STEP 250 1.20/0 40 white and light wood, STEP 100 0.5/0.5 infrared rug and STEP PN-200 infrared plinth heater.

What information about STEP heaters can be found on your website?
On the site, for each model, a detailed product card has been compiled, which indicates all the characteristics of the heater, the calculation of the heated area, an overview is presented, you can also read and download the installation instructions and the quality certificate. Also on our website you can find information about:

Interested in STEP interior heaters with a pattern, is it possible to buy them?
Yes, there is such a possibility. But printed heaters are sold on order. Order execution time is 2 weeks after prepayment.

What are the reviews on STEP infrared panels?
Reviews for STEP heaters are positive. They are reliable and durable, have an attractive appearance. As for their main function - heating, one should be guided by the recommendations for choosing power in relation to the area.

Customer Reviews

I bought two Ballu heaters for my summer cottage. They work great, heat up quickly and very well, do not make noise. Delivered quickly the next day after the call. Everyone told and advised which one is better to take. I'm glad I bought from this store.

Wonderfully written about IC! Everything is clear, competent speech, the pros and cons are objectively described. Having studied many different construction sites, this is the first time I see such a well-written text. This instills confidence in the store. As I choose, I will only buy from you. Correct, please: "firstly," - you need a hyphen and a comma. "differently" - hyphen. A few commas are missing, check.

Good store. Close to the subway, the pavilion found quickly. Pleased that there is a terminal for payment by card. I bought an infrared (IR) PION 04 luxury with a thermostat from the manufacturer Eberle to my father for a dacha for a chicken coop, he is satisfied.