Super hydrophobic do-it-yourself coating. using additives

Most surfaces in a living space are very susceptible to moisture. Not important - natural material or artificial, but the result is always very similar - the gradual destruction or even corrosion of the surface layer. But using modern facilities, you can protect your home from such influences for a long time. For example, water-repellent impregnation or special hydrophobic additives designed for variety of materials, will help to effectively protect surfaces from moisture for quite a long time. Let us consider in more detail each type of these compounds in order to use them correctly if necessary.

Porosity is an integral feature of many building materials. Their structure is such that any moisture that gets on the surface is able to quickly absorb and penetrate deep into its pores. At the same time, there is a significant reduction thermal insulation properties, gradually deteriorating appearance material. As a result, water, and with it all kinds of impurities, including aggressive substances, have a detrimental effect on building structures, causing their corrosion and subsequent destruction. In order to protect materials and at the same time enhance their properties, liquid hydrophobised substances have been developed. A multifunctional water-repellent liquid can not only prevent the penetration of moisture into building materials.

With its help you can:

• eliminate or minimize the occurrence of efflorescence, mold, unwanted wet spots and rust;
• protect the painted surface, which will extend its service life;
• increase surface resistance to low temperatures (up to 5 times).

It is especially necessary to use this tool in places with high humidity(including basements, bathrooms, swimming pools). And also during the construction of paths, laying decorative and natural stone, masonry walls made of porous materials with low frost resistance. Surface treatment can be carried out both at the stage of construction and repair, and on ready-made structures. In this case, the air temperature should not be lower than 5 degrees.

The use of water-repellent liquids is ideal for porous surfaces

Means for working with concrete structures

Also designed to work with concrete effective remedy to protect and strengthen porous concrete surfaces. Special water-repellent impregnation for concrete in the following way:

• The polymers that make up the product are able to penetrate into the concrete to a depth of 3 mm. At the same time, the impregnation effectively fills the pores of the material and, connecting with the top layer, forms a strong connection.
• The treated surface remains vapor-permeable. In addition, reinforced upper layer becomes more resistant to chemicals, moisture, the influence of low temperatures and mechanical stress. The application of the substance helps to qualitatively dedust the surface and improve its hygienic properties.
• Water-repellent impregnation is very effective: the structures covered with it are reliably protected from moisture even during heavy rainfall. Due to the fact that moisture does not penetrate into the concrete impregnated with the composition, even severe frosts are not afraid of it.

THIS IS IMPORTANT TO KNOW!

• In order for the impregnation to be as effective as possible, it is necessary to properly prepare the surface before applying it.
• The product must not be allowed to freeze.
• The substance is not intended for impregnation of structures that will be under water.
• It should be applied at a temperature of 10 to 32 degrees in dry weather, preferably during the day, when the moisture concentration in the air is minimal.
• Each area of ​​the treated surface should be covered evenly, without stopping.

The use of water-repellent finishes helps protect concrete structures from the damaging effects of moisture

Wood treatment with moisture-proof compounds

For processing all kinds wooden surfaces a water-repellent impregnation for wood is used - a powerful water repellent with a pronounced water-repellent effect. Usually it is used in bathrooms, saunas and other rooms where the humidity level is quite high. It is a colorless liquid, free of organic biocides, easy to use and very economical. For creating quality coverage it is enough to apply one layer of impregnation and leave for 12 hours to dry completely. After that, within seven days, the surface must be covered with protective wax.

It is important to apply the water repellent with smooth movements, completely passing the entire area with the brush (stops during application of the agent affect the quality of the coating)

Types of water-repellent coatings

There are 4 types of coatings designed to protect against moisture:

• impregnation,
• varnishes,
• stains,
• special colors.

We have already considered enough about impregnations, now let's talk about varnishes. These substances are practically not colored (or not colored at all) and help to emphasize natural beauty tree, at the same time covering it with a beautiful protective layer. Varnishes are applied quite easily and retain their attractiveness for a long time. separate view This group of substances is a special water-repellent varnish (or drying oil). The purpose of its application: to prevent swelling of the tree, to protect against decay, shrinkage and the spread of mold. Drying oil is applied very easily - with a roller or brush. If the parts are small, they are even simply dipped in protective compound.

1. detail processing;
2. applying funds to the finished structure.

On the surface of the masonry treated with a water repellent, only some drops linger on the non-wetting surface

It should be noted that drying oil is only a base coat and it has its own “shelf life”. For example, if after some time the treated tree loses color, it is necessary to apply another layer of drying oil. This process must be repeated once every 3-4 years, but if the products are constantly in humid environment, surface treatment should be carried out more often.

THIS IS IMPORTANT TO KNOW!Drying oil is protective, not decorative varnish, so you can and even need to apply paint on it. Experts recommend treating everything before painting wooden elements in the house with drying oil to prevent their deformation and increase their service life. After application, it is necessary to dry the treated parts for three days.

A little about translucent stains

Another popular water-repellent coating is called stain. It is also based on drying oil and is able to penetrate wood well. It is convenient to apply it both with a sprayer and with standard methods. If the wood was recently purchased and is still quite fresh, the stain is applied in two layers. If the surface has already been once treated, it should be covered with one layer of stain in order to restore the protective functions. This should be done when the previously applied coating begins to discolor on the surface.

Features of transparent and opaque varnishes

Opaque varnishes have their own characteristics:

• high pigmentation;
• a high degree of opacity.

By their properties, they are more reminiscent of paints: saturated color and the thick texture practically hides the pattern of the tree and completely changes its color. And yet the color palette here is closer to natural. Apply them better with a brush- so it is much more convenient to achieve uniformity in the shade of the coating. A newly purchased tree is covered in two layers.

Transparent varnishes, as well as their varieties, cannot be used to cover wood that will be exposed to direct sunlight. This is their main difference from other similar products. To choose the right water repellent, you need to have certain knowledge. Sellers can not always give quality advice, so better choice necessary coatings provide a person who knows and understands this issue.

Varnishes create a hard, water-repellent, abrasion-resistant film on wood, while at the same time preserving and emphasizing the beauty of the texture, as well as the color of the material.

Special paints with water-repellent effect

Another type of powerful water repellant is water-repellent paint for exterior and / or internal works. It is used for painting all types of walls. Advantages: ease of application, no pungent odor, hygiene and water resistance, cost-effectiveness, vapor permeability.

Can be applied to damp surfaces. After drying, it creates a reliable vapor-permeable hydro-barrier. The paint is quite economical - for example, for surface treatment with an area of ​​​​14 square meters just 1 liter of paint is enough. Before application coloring composition The surface must be cleaned and, if necessary, degreased. Such paint dries quickly: one hour is enough for one layer, about four for the next.

Waterproof paints are able to isolate the surface from moisture, while maintaining vapor permeability. They can be applied even on damp surfaces.

Additives for creating waterproof concrete

Concrete, as a material with a high degree of water absorption, needs special treatment. Moisture can lead not only to shedding concrete surface but also to its complete destruction. Often, to protect structures from harmful effects, it is enough to apply a layer of a water-repellent substance. But sometimes this is not enough - you need to change the structure of the material, reduce porosity and make the concrete more dense. It is for these purposes that water-repellent additives for concrete were created - substances that can affect the plasticity and density of the material. The result is a product that is easy to install and, after hardening, turns into a waterproof, very durable, dense and frost-resistant product. This can be achieved by using (in combination or separately) 3 main types of additives:

• Polymer.
• Plasticizing.
• Colmatizing.

However, even using all three components at the same time, it is impossible to achieve absolute water tightness of the structure. This is especially true for structures that are not monolithic. The presence of seams in concrete, the gradual appearance of cracks and other defects are the main reasons why the desired tightness of the building becomes impossible.

Using special additives, you can get high quality and waterproof construction material

The use of water repellents provides many advantages:

• they make it easier to work with materials (for example, concrete) and are practically invisible on finished structures;
• do not create a heavy film, but on the contrary, allow the building to “breathe”;
• they do not contain harmful substances therefore safe for the environment;
• the use of water-repellent agents on the facades of buildings contributes to the extension of their service life.

When choosing water repellents, it must be borne in mind that certain means are provided for each type of surface. By entrusting their selection and application to a competent person or group of craftsmen with a good reputation, you will get confidence that the work will be done efficiently and on time. Properly processed products and structures will last for many more years, while maintaining an excellent appearance.

For any installation and external finishing work water repellency of brick or concrete is mandatory. This is reliable protection. artificial stone from excessive absorption of moisture, which increases its frost resistance and prolongs its service life building structures. And the higher the porosity of the material, the more it needs such processing.

When are water repellents needed?

Water-repellent compositions are divided into two main groups: bulk and surface. The first includes various additives that are introduced into the body with their own hands. concrete mortar at the stage of its preparation. They increase the water resistance class of the monolith, compact and strengthen it, and prevent the appearance of white efflorescence.

The second category is film-forming and penetrating water repellents that can be used to protect finished concrete products, brickwork, decorative cladding, tiles, etc. After application, they create a thin waterproof layer on the surface. From time to time, such a coating will have to be renewed, but it is cheaper than subsequently restoring the structures with your own hands.

For maximum reliable protection experts recommend combining both methods of hydrophobization. Moreover, it is desirable to choose not universal compositions, but those that are designed for specific materials and operating conditions. Manufacturers today offer formulas that can be used both as additives in the solution and for application to the surface.

Water repellents are in demand where artificial stone experiences the destructive effects of various liquids:

• Brick walls of houses and lined facades.
• Fences, blind area, borders, paving slabs.
• Receiving trays of drains, wells, septic tanks, bowls of pools.
• Concrete parking areas, workshops, laboratories, etc.

Overview of popular brands

When choosing water repellents, it is necessary to focus on the scope of their application: what is suitable for heavy concrete does not always work effectively on gas blocks with their high porosity. It is important to take into account the degree of exposure to moisture on the structure itself, so as not to waste money on expensive compounds.

1. Aquasil.

The concentrated preparation reduces the water-absorbing capacity of heavy and porous concrete by an order of magnitude and improves similar indicators for bricks by a factor of 30. At the same time, the formula provides a strengthening of the monolith by about a third of the original grade. The low alkaline mixture is fireproof and resistant - re-application will be required no earlier than after 10 years.

After diluting the concentrate in a ratio of 1:10, the consumption of Aquasil is about 250-500 ml/m 2 . This is a universal water repellent that can be used both to improve the characteristics of the solution (introduced up to 0.5% by weight of cement) and for surface application. In the second case, water-repellent properties appear already 2 hours after impregnation.

Concentrated emulsion for dense products protects not only the cement stone itself from external influences, but also reinforcement, as well as embedded metal parts of reinforced concrete products. Spectrum 123 perfectly fights mold and harmful microorganisms, and the effect of hydrophobization becomes noticeable after 20 hours after application.

concentrated silicone mixture diluted in a ratio of 1:4 or 1:3, if you have to work with porous substrates. It is applied only on a dry surface at a positive temperature. The depth of penetration into the thickness is 3-10 mm, the average consumption is 0.15-0.3 l / m 2.

3. Tiprom-U.

In terms of its main characteristics, it is similar to the already considered Aquasol: the same organosilicon concentrate used both in solutions and as a surface protection of porous materials. It shows itself well as a dirt-repellent composition, relieves brickwork from the appearance of efflorescence. However, he also has restrictions on use: in his instructions, the manufacturer does not recommend Tiprom-U for non-absorbent surfaces that are constantly in contact with water.

The composition penetrates into the thickness of concrete to a depth of 35 mm, clogging the internal capillaries. In addition, it easily repels not only water, but also ice, which allows it to be used for processing paving slabs. The solution is applied in several layers at time intervals (no more than 10 minutes) until absorption stops. Consumption - 150-300 ml / m 2.

4. Crystallisol.

Under this brand, a whole family of various highly specialized water repellents for concrete is produced - each for its own scope.

The most popular of them:

• Monolith - a formula for volumetric hydrophobization. Increases the waterproof rating by 5 classes without entering into a "conflict" with plasticizers and antifreezes.
• Crystallisol W12 - provides the monolith with high moisture resistance up to 1.2 atm and increases the number of freezing cycles to F.

Surface water repellents of this brand are water-based, and therefore form on concrete only a transparent colorless film with good performance vapor permeability. They are fireproof and have antiseptic properties.

5. Armokril-A.

The deep penetration agent is made on the basis of polyacrylates, and in fact it is an impregnating varnish. Great for pigmented products like artificial stone veneer, paving slabs and sectional fences because it prevents the paint from fading on their surface.

Armocryl has a pleasant " by-effect»: it strengthens and de-dusts concrete bases, strengthens cement joints in brickwork. Instructions for use prescribe the application of varnish in two layers with a break of 12 hours. The total consumption depends on the texture of the surface, but usually does not exceed 210-260 ml/m 2 . Armokril itself is resistant to alkalis, acids and refined products.

6. Alpa Polyfluid.

Deeply penetrating water repellent, which includes not only synthetic resins, but also fungicidal additives, as well as antifreeze. Designed to protect porous and already slightly cracked surfaces, can be applied with a brush or used to inject problem areas. It functions on the principle of penetrating liquids, that is, it crystallizes in the pores and capillaries of concrete with the participation of moisture. Partly because of this, the price of the French remedy is higher than others. Polyfluid has an average consumption (about 0.2-0.3 l / m 2) and allows you to start working after 4 hours.

Application features

Any hydrophobic additive in concrete is introduced into the solution itself at the stage of its preparation. Here you only need to correctly calculate its amount for the total volume of the mixture, following the instructions on the package. With water-repellent coatings work differently. To apply with your own hands, you can choose any handy tool: rollers, brushes or spray gun. Coloring is usually carried out in several stages until the water repellent is no longer absorbed. After that, it is left for a day to dry. You can then paint, but if you chose a silicone-based composition, this will no longer be possible.

Before starting work, check the instructions for use on the package. Water-repellent coatings may differ from each other by the principle of application: on a wet or dry surface. The former are usually penetrating compounds who need water to run chemical reaction with concrete components and clogging its pores with insoluble crystals. Film-forming mixtures are applied to a dry base, unable to penetrate too deeply.

Price

Since we were not as lucky with the climate as the inhabitants of sunny California (there, by the way, + 26C now), the issue of using water-repellent agents for outerwear is always relevant. Either snow, then rain, then frequent washing, then all this is selfless at the same time. And, as a result, the fabric (or leather) loses its moisture-proof properties and gets dirty faster. And, the most unpleasant thing is that very ugly divorces can appear on it, getting rid of which will be, to put it mildly, problematic.

But thanks technical progress- the solution has long been found, tested and deservedly has millions of fans around the world. Water repellent! They are available in the form of various liquids, aerosols and other sprays. The choice of products is so large that if you are a shopaholic, you are doomed to walk happy all autumn and winter.

By the way

When you buy leather or textile outerwear, then it is already treated with water-repellent agents. Their composition is exactly the same as that of the impregnations sold in stores.

And right now we will tell you the whole truth about impregnations and reveal their secret correct application, by appointment only.

What are impregnations

The range is very extensive. There are impregnations for shoes, for clothes, for awnings, backpacks and other things acquired by overwork. And there are also universal ones, which is extremely convenient if you are a happy owner of all of the above and a tent to boot.

Deception all around :)

It turns out that water-repellent products are not so water-repellent. The fact is that impregnations do not repel water, but only weakly attract water molecules. Rainwater rolls off such clothes. But, in order not to frighten us with the term "low-attractive impregnation", manufacturers allowed themselves little deception and call them "water-repellent".

That is, by treating fabric or leather with impregnation, we achieve that it will now be much more difficult for it to absorb water. By the way, the same fate will befall dust and dirt, but will spare the air. Therefore, protection will be, and breathability will not suffer.

Bonus!

The use of water-repellent agents not only protects against moisture, but also increases the wrinkle resistance of the fabric and its resistance to abrasion.

How often to spray?

Water-repellent impregnations should be applied from the first day of wearing, after each wash (and dry cleaning) and periodically repeated, if necessary (since the water-repellent layer wears out over time). And they should be used for all clothes that sooner or later will fall under rain or snow: for jackets made of textiles, leather, suede and for sheepskin coats. Thanks to this, you will increase the life of your favorite things.

Important!

There are special impregnations for membrane clothing.

Look at the jacket, if you see that some places or all of it has begun to absorb water, then go ahead behind the impregnation can. It happens that it is enough to reprocess only the elbows or, for example, the hem - places that are most susceptible to dirt and abrasion.

All of the above is especially true for leather jackets, which, as you know, cannot be washed.

how handle ?

So, impregnations are available in two forms:

aerosols;

· bottles with mechanical sprayers or with foam sponges.

Their chemical composition, respectively, is different. In one case, we simply spray the product on clothes. In the other, we apply it on a sponge and distribute it over the fabric with a sponge. In each case, be sure to carefully read the instructions!

All impregnations are different, manufacturers are different, instructions are different. Some products are applied only to dry clothes, some can (or should) be applied to wet clothes. A lot of nuances! Learn everything, don't be lazy.

Important!

There is one single rule that is always relevant for any thing. Do not apply water repellent to dirty clothing! You can completely destroy the coating. And this, unfortunately, is an irreversible process.

Or maybe something like this?

Do you still think that you can do without water-repellent impregnation? What are these marketing gimmicks? Then read a very small but very informative physics lesson.

· Wet cloth is less durable than dry!

· Water soaked into fabric or leather weighs down clothing and deforms it. After drying, the skin can lose its elasticity, become hard and crack.

· If you, in wet clothes, get into conditions with low temperatures– the water in the material will freeze. And water expands when it freezes. This may damage the material.

So, it’s better to pick up a can of impregnation once than to regret a hundred times that you don’t live in California. Where, by the way, is still +26C :)

That's it. Stay with us! We still have many undiscovered professional secrets and very interesting stories about outerwear.

Not so long ago, the emerging branch of nanotechnology promised us to turn the usual views of the world and give people something that was previously impossible in principle. And if about six years ago the people did not believe in it, arguing that it was just a way to pump out the state budget, now we have the opportunity to observe ready-made products of this industry. One of these unique products is windshield nano coating, which, by the way, is used by quite a few motorists. We will tell you about this, or more precisely, we will present to your attention the best nano-coating for automotive glass. But first, let's find out how, and most importantly, what this or that nanocoating for glass is used for.

Nanocoating - what is it and what is it for?

Every car owner has experienced driving in rain and snow. And very often the windshield washer fluid is not enough in such cases. Wipers clean the glass only in places of direct contact with the windshield, thereby reducing the viewing radius. For example, on country roads covered with sleet, very often all this snow, flying out from under the wheels of an oncoming car, ends up on the windshield of your car. Agree, this is a rather unpleasant and frightening sight, especially when this dirty, heavy, wet snow mixed with water in large quantities flies out from under an oncoming truck rushing at high speed, and with a booming blow, all this mass is right in front of your eyes.

It's a very dangerous situation that moves with high speed. A person can be frightened, confused, forget about the wipers, and without seeing the road, on a wet, slippery, snowy road, he can easily lose control or drive into the oncoming lane. And in the event that the wipers are still turned on, they will not clean all the glass. In uncleaned areas, the snow will gradually melt, and the water will still slowly drain. But the dirt that was in the snow will settle on the glass, and by the end of the path it will dry tightly to it.

It is in such situations that the windshield nano-coating or, simply speaking, anti-rain will demonstrate itself in the best possible way. These hydrophobic coatings are "not friends" with almost anything that gets on them. Water that has fallen on glass treated with a hydrophobic substance does not form a wet film on the surface, but is collected in many droplets, which are instantly carried away from it by a stream of oncoming air. The hydrophobic coating forms an absolutely transparent film, invisible to the human eye, on the glass, which not only repels moisture, dirt and snow, but also protects your glass from minor scratches. In those cases, if the dirt on the treated glass is still not removed during the journey and dried up, then it is easy and fast, without using special efforts without resorting to special detergents.

The side mirrors and side windows of the car are not equipped with washers and wipers at all, but sometimes even more rain and dirt gets on them than on the windshield. By applying a nano-coating for automotive glass to such places, you will significantly improve the side view and the view from the side mirrors. Not all cars are equipped with headlight washers, and headlight wipers can generally be found on units. And so that the headlights, not having the above functions, still remain clean and give good lighting, it is enough to apply a nano-coating for glasses on them.

Top 3 hydrophobic coatings for glass

At first glance, all products are very good and have a whole bunch of advantages. However, in reality, as practice shows, everything is not as smooth and beautiful as the manufacturers themselves. For example, the speed at which the effect of a hydrophobic coating becomes noticeable often does not correspond to reality, and with the declared 30–40 kilometers per hour, in fact, the effect can only be noticeable at 60–80 kilometers.

The same applies to the terms within which the nano-coating for glass, according to manufacturers, gives a 100% result. Most foreign companies guarantee the validity of their products for ten, eleven, or even twelve months from the date of application, in fact, the effect is lost after two to three months. As for operation, almost all foreign products lose their qualities in severe frosts. With all this in mind, we have selected the best hydrophobic coatings for glass, and this is what we came up with.

First place: NanoPro

Nano coating for automotive glass the best properties and price compared to others. It also has better frost resistance in comparison with foreign reagents. However, let's take a look at the properties of the product:

• The effect of self-cleaning glass from moisture becomes noticeable already at a speed of twenty kilometers per hour.
• The validity period of the reagent from the moment of application is up to six months or twenty thousand kilometers.
• The nanocoating does not peel off and does not exfoliate from the surface throughout the entire service life.
• It has anti-reflective properties and protects the driver from blinding oncoming traffic.
• Moisture, rolling off the surface, takes dust and dirt with it, leaving the glass absolutely clean.
• Windshield nano-coating has increased resistance to any physical and chemical attack.
• It has increased frost resistance, and also increases the rate of glass thawing.
• At times increases the life of glass and wipers.
• glass from scratches.
• The cost of one set is from eight hundred and sixty rubles.

This manufacturer is currently testing a completely new windshield nanocoating containing fluorine. Such a product will be unique in its kind, as it will be used not only for glass, but also for plastic, as well as for materials coated with varnish or paint. It will be possible to cover at least the entire car with such a reagent and then not wash it at all, well, except occasionally pour clean water over it.

The fluorine components have an antistatic property, as a result, moisture is not retained at all on the treated surface and rolls off it even at the slightest inclination. Having processed glass with such a composition, water will instantly roll off it, even if the car is stationary.

Runner-up: Pro Tec

A worthy nano-coating for glasses is practically in no way inferior to the one described above, however, it loses to the first one in some respects. And for what exactly, let's see for ourselves:

• The effect of self-cleaning glass from moisture becomes noticeable at speeds of forty kilometers per hour.
• The effectiveness of hydrophobic application is maintained for twelve months or twenty thousand kilometers (in fact, the service life is from three to four months).
• The reagent does not peel or flake off during the entire (real) service life.
• Nano coating for automotive glass significantly improves visibility in difficult weather conditions.
• It has anti-glare characteristics and reduces the likelihood of blinding the driver by oncoming vehicles.
• Significantly increases the life of the wipers.
• The price of one set is from one thousand fifty rubles.

So, from the above properties, we see that the Pro Tec hydrophobic reagent loses to the first sample in terms of price, service life, and also in terms of the minimum speed at which the self-cleaning effect begins to appear, and therefore only second place

For the normal service of the paint layer on the car, it is necessary to use effective protective layers. Many automotive manufacturers today offer a wide variety of upper body trim products, giving excellent protection. The hydrophobic coating of the body used to be a curiosity and was used quite rarely. Today, this technology has become absolutely familiar, and stations are increasingly ordering its implementation. Can apply various technologies, apply a water-repellent surface with your own hands or at the service.

Good service of body parts is possible when protected from moisture. But for modern machine this may not be enough. It is important that corrosion processes stop, the risk of destruction of body parts is reduced, and the risk of damage by sand and gravel from under the wheels is completely gone. Each car has its own tasks in terms of applying protective coatings. most expensive and effective materials serve for a long time and perform even unusual anti-vandal properties. So you can always find suitable options finishes.

Hydrophobic technologies - the main application possibilities

The body of your car can be trimmed different ways. The question is how long the protection will last, how it will protect the body. It is worth choosing one of the traditional technologies that actually work to protect paint layers. A hydrophobic coating for a car can be made in several ways. The main solutions that are used in modern car finishing are as follows:

• polishing compositions with the effect of professional wax, which protects the car from damage for a long time;

• permanent layers in the form of varnishes and various transparent layers of paintwork to keep the paint in perfect condition;

• hydrophobic layers, which are composed of various polymeric ingredients and are held permanently;

• products for temporary protection of metal parts of a car, which are washed off over time;

• special mixtures for glass - polishing and spraying elements with protection against contamination.

Water repellency not only helps keep the paintwork looking good, it also keeps your car's body clean for a long time. Car owners who have used permanent hydrophobic technologies notice excellent results car wash savings. Such a coating is especially important in winter, when the paint is constantly exposed to mechanical damage at low temperatures.

Application of protective layers on metal parts of a car

Any coating can protect the body, but for each car, the selection must be individual. Often, hydrophobic technologies based on wax mixtures are used. This is the most cheap option. Experts do not recommend buying products in aerosol cans. Aerosols and various offers amateur type for do-it-yourself application work very poorly. It is worth noting the following features of body trim with protective coatings:

• you can apply hydrophobic coatings with your own hands, but you must follow the technology;

• the selected technology and type of composition determine how long the protective layer will last;

• before applying the product, it is important to completely clean the body parts in order to achieve a good result;

• after applying some wax formulations, you do not need to wash the car often, otherwise the protection will be washed off;

• after a while, you will have to repeat the application of the protective layer on the surface in order to prolong the effect.

You can buy hydrophobic materials for car decoration at low prices. But cost does not determine quality. In this case, it is important to take into account the quality of the preparation of the body, the application of liquids. Permanent coatings also deteriorate and scratch over time, but they retain high integrity and quality of the paintwork. The wear of this layer depends on the activity and scope of transport operation.

Is it worth coating glass with hydrophobic materials?

AT recent times becoming more and more popular hydrophobic coating for glass. This is special compound oil-based, which works as a surface to repel water. There are several controversies in the surface treatment of glass. The problem is that a low-quality composition will quickly be smeared by wipers on the surface and will create obstructions for visibility.

If you decide to treat car parts with such products, it is better to avoid getting particles of the fat mixture on the body. First you need to check their performance on small area. It often happens that the coating does not work, but only pollutes the surface. This should not be allowed, since it is extremely difficult to clean the fatty layers without special chemicals.

How much does professional bodywork for protection cost?

A good protective coating on a car will be quite expensive. The problem is that self-application does not always give high-quality results. You have to turn to the experts. You should not go to a regular car wash and expect that the wax polish will last a very long time and will please you with the quality. In fact, only good processing hydrophobic compositions in the spray booth can be of high quality. At professional processing There are several stages of work with the body:

• the coating is prepared in accordance with your needs, this will help to complete the tasks;

• car is thoroughly cleaned using chemicals, dust is removed from surfaces;

• hydrophobic material is applied with a guarantee of quality, so you will be sure of a working coating;

• visual results will be excellent, which cannot be said about trying to apply products yourself;

• the processing time for the car will be minimal - you can apply protection in a few hours and pick up the car from the service.

Many service stations offer amazing features, but look beyond the description. Often used technologies and materials are not as reliable and durable as they try to present to you. It is important to learn more about the materials that professionals are going to use, about the possibility of washing them off if necessary. It is also recommended to use classic and traditional technologies to avoid problems. New solutions are not always effective.

Summing up

There are dozens of options for body treatment to protect it. Technologies for creating hydrophobic layers on body parts and on glasses - lovely way protect the machine from minor damage. It is especially important to use them after applying expensive paintwork materials such as chameleon or chrome. It is imperative to organize protection on top of the applied paint so that there are no chips and scratches. Otherwise, the car will look much worse than immediately after professional painting.

Coatings designed to resist scratches, moisture and other hazards can be used on a variety of vehicles. Their cost depends on the selected materials and methods of application. Often the application is quite simple and quality formulations allows you to bring your body protection to perfect condition with your own hands. Hydrophobic solutions - modern way make your car beautiful and protected from various influences. It is better to choose classic proven technologies.