Improvement in the methods and means of protecting premises has led to the creation of locking devices without keys, which makes it possible to increase the burglary resistance of doors of any type.
The code lock on the door appeared on modern market relatively recently, but has already become popular among consumers. The reason for this is the special design of the mechanism, which does not provide a keyhole. This makes it easier to open and close the door, and improves the protective functions of the lock.
Coded door locks are of dubious popularity: some do not deny the convenience of using the code, but are still devoted to the old and reliable mechanics, others are sure that it is modern electronic means able to protect their property and warn against illegal entry.
Modern door locks with a code according to the principle of operation, in addition to the mechanical code lock, as the most common, are also divided into electronic and electromechanical.
In a mechanical combination lock, the code information is stored in a certain position of the elements of the mechanical mechanism (pins or rings). The lock is unlocked by simultaneously pressing several elements programmed with a code.
Electronic code lock on the door works on the principle of storing the code on a special electronic memory, and the input is done using the keyboard.
Electromechanical coded door lock has a more complex structure. The principle of operation is based on the cocking of the bolt, which acts on the working spring of the mechanism and fixes it, but the door is held in the closed position. Applying voltage helps to release the latch, due to the spring, the bolt goes inside the lock body and thus the door opens.
According to the method of fastening, manufacturers offer mortise and overhead combination locks.
To open a combination mechanical lock, you must enter a specific numeric code by simultaneously pressing several buttons. Such a variety combination locks has been used for more than a year, and is very widespread. As a rule, they are installed in doors that open and close frequently.
These locks are mounted on:
Is established on an entrance door both, with the right-side, and left-hand arrangement of a door. Installation is carried out on a metal or wooden door and a gate. Inside the room, the door is unlocked by pressing a special button or lever.
To close the door, just slam it shut and the door lock goes into armed mode. Also, the sharing of a mechanical combination lock with other protective devices is not excluded.
Everyone agrees that carrying in your pocket a whole set of keys to the house, office, car, summer cottage, etc. not at all enjoyable. And the installation of a combination mechanical lock will significantly improve the situation, eliminating several rather big but important keys.
The advantages that a mechanical code lock can boast of are quite enough to give preference to just this type of protection:
At least fulfill correct installation and repair, in compliance with all standards, with a guarantee, only an electronic engineer is capable of, but it's worth it.
Unfortunately, despite the advantages of the castle, it also has certain disadvantages, because perfect locks have not yet been invented. Naturally, the code can be forgotten, especially if you do not regularly open these doors, sometimes the password can just fly out of your head.
Also, a third party can peep the code, and if you want to keep secrecy, enter it without strangers. In addition, if the code long time not changed, but used heavily, the surface of frequently typed buttons will shine and clearly reveal what you intended to hide.
Unlike electronic combination locks on the door, for a mechanical one you need to use physical force to open it, and when changing the code, you will need to completely remove the lock from the door leaf.
A rather negative feature, especially in cold climates, is the influence environment, or rather, freezing of the structure at low temperatures, which can lead to worse opening.
It is unlikely that a combination mechanical lock will be able to disturb you with its breakdown, but in the event of any failure, you should immediately contact the repair services serving your door lock.
Do not commit a feat and try to make repairs yourself. A simple locksmith will be unable to diagnose the cause of the breakdown, only a professional will be able to replace the failed elements and reprogram the mechanism.
Repair and installation of a mechanical device with a code is much more expensive than traditional locks. This is due complex design And high cost component parts. Lock recoding repair mechanical type requires its dismantling, which is not always convenient.
Each homeowner is interested in ensuring that his property is as protected from intruders as possible. Not only the door to the house must be durable and able to withstand attempts at illegal intrusion, but also. Convenient and modern way security of the gate is a mechanical lock, which can be bought at affordable price and install by yourself. The lock on the gate is mounted at the final stage of the construction of the fence.
Classic combination lock for a gate
Combination locks look great on doors, gates and gates. They are ideally suited for doors made of solid sheets, such as on, as well as for patterned doors made of welded bars or forged metal. The code combination in the device can be changed over time, which is an additional guarantee of security.
Modern code mechanisms are the most popular and affordable option for installation on a gate.
Elements of a modern combination lock for a gate
Such constipation, even the budget category, is designed for permanent and long-term operation. They provide high-quality protection of the territory and do not require special knowledge for self-assembly. can be produced on their own even in the absence of serious experience in such work.
To the main positive characteristics these mechanical devices include the following indicators:
Installed code lock
Locks for gates that open with a special code, and not with an ordinary key, can be of different types. Some of them are more simple and inexpensive, others are complex systems and differ high prices.
The majority of the population prefers mechanical options for locking products. Any complexity of a mechanical lock can be purchased at special outlets and installed without anyone's help. Such a code lock cannot be opened by unauthorized means, for example, a master key.
This significantly increases the level of security of private households, providing the territory with a high degree of security. The simplest mechanical type lock is a system that snaps into place when the door is closed.
You can open such a gate by dialing the only correct combination (code). The functionality of the lock is ensured by its feature: it uses special rings, located according to the pins. The combination of the code (programmed) of the mechanical lock-latch makes the gate or gate resistant to burglary and increases its security qualities.
They are called combined, or mixed, options. Models in this category are equipped with mechanical drives powered by electricity. Installation of locks of this type is most often carried out on large gates. They differ high rates reliability and relatively large size.
Inside such a constipation there is a specially designed circuit, in which there are both electronic and mechanical components.
If there is an interruption in the supply of electricity, for example, in case of unforeseen breakdowns on the line, electromechanical lock opened with a simple key. If the installation of the lock on the gate or gate is carried out by a non-professional, a mechanical rather than an electromechanical system should be preferred.
The electronic type code lock has a special programmed block.
Such a lock can be opened by typing the desired combination of characters on the product panel or on the control panel. According to the installation method, electronic mechanisms for use on gates can be both mortise and overhead.
Mechanical locks can be installed without assistance. Self-assembly the lock on the gate or gate must be carried out carefully and in accordance with the instructions attached to it. For this work, the following tools are needed:
Stages of work:
After the mechanical lock is installed, it must be programmed according to the instructions that come with the product.
Many summer residents prefer gates and gates, the frame of which is a construction of profile pipe. This is the most economical solution, which is possible, which makes the fence beautiful and original. The presence of a frame in the gate or gate provides the combination lock with an ideal seat.
Installation of a mechanical lock in a profile pipe is available to any home craftsman. Enough to do accurate calculations, and then cut out the nest and holes for the screws. Installation of a code device in such a gate can be carried out efficiently and quickly.
For work you need:
A standard combination lock includes a core, a connecting square, a bar (reciprocal), handles, bolts.
Wicket with installed electric combination lock
Most often, manufacturers produce combination mechanical locks with the expectation that they will be installed on a gate made of a solid sheet. For this reason, the connecting square and the bolts for the tie do not always correspond in length to the parameters of the profile pipe.
Option to install a code lock on the gate
A simple mechanical code lock involves choosing a combination of three digits. These figures can be programmed independently. For correct programming of the device, it is enough to strictly follow the instructions supplied by the manufacturer, which must be supplied with the combination lock.
Nobody wants to see strangers in their entrance or on the territory of a private house. But, if the door is not protected, this cannot be avoided.
In this case, the combination lock will become an assistant.
This is a device that locks the entrance and opens with a special combination.
It works using a specific code of numbers or letters that are entered different ways, depending on the type of fixture. There is a special keyboard for this.
This type of lock does not have a key hole, so attackers will not be able to crack the code version. The main thing, after installation, do not forget the code.
Such devices are very popular on entrances, cases, safes and other devices that need protection.
Such locks are gaining more and more popularity in the market, they have both positive and negative sides.
Benefits of a code lock:
In addition to the advantages, such devices have some disadvantages:
Despite all the pros and cons, a combination lock is considered reliable, and in order to increase the security of the entrance, they often use a combination with other varieties.
Based on the type of construction, such devices are divided into three types:
Defensive combos are pretty easy to figure out. If the deputy has only one circle, then it will be more reliable, but then it will be much more difficult to reprogram it, and simple typing of the code will become inconvenient.
Designs with buttons are opened using a special combination of numbers that are easy to guess. Such devices are popular at the entrances to the entrances. apartment buildings and their prices are low.
These types are different high level security and a wide range of functions. They are widely used to protect bank premises and private homes. Among the cons electronic locks a barrier to purchase may be its high price.
The appearance of such a device is not much different from the usual mortise lock so it can be installed on any door. There is also the option of using an overhead design.
You need to choose a particular type of lock based on its goals and planned costs.
To install a combination lock, you first need to fix the place for the new lock with tape.
Using an awl, mark the location of the keyhole (for the electromechanical version) and the center for the mechanism of the device.
After that, you need to drill holes and insert the locking part of the mechanism.
For the front part, you must first make a notch, and screw the lock with screws.
To install electric option, you need to make holes for the wires. After that, the device is adjusted to the left or right door, the manufacturer's instructions will help with this.
The wire of the lock must be connected to the receiving one in order to fix the mechanism on the wall. final stage will be setting the opening by dialing the code and from a distance (indoors).
Installation without any problems can be done independently, especially if you have experience in installing the most common locks on the door. But, there is also the option of using the services of specialized companies that will install the lock quickly and efficiently.
Model | Type | Price |
---|---|---|
ZKP-1 (ZKP-30) METTEM | Mechanical | 870 r. |
Kerberos 150-10.00 | Mechanical | 1026 p. |
NORA \250 chrome | Mechanical | 2600 r. |
CBD-10V | Electronic | 1660 r. |
ALP208EM | Electronic | 2000 r. |
ST-SC040EK | Electronic | 5000 r. |
ISO 5113-20 | Electromechanical | 3100 r. |
ISO 5213-20 | Electromechanical | 3460 r. |
ISO 5113-10 | Electromechanical | 3750 r. |
The combination lock is able to reliably protect the door of a room or territory. In operation, they are very simple, they can be covered from the effects of precipitation with a small visor. It is also important not to disclose the code to third parties.
Read the installation instructions locking mechanisms? Strive to save money on installing combination locks in metal door? Are you suspicious of the masters of specialized companies? Your fears are not in vain.
Today, many amateurs begin to carry out complex work, not having the slightest idea about them. In "Zamki-SAO" our employees will take into account all your wishes, delicately install a combination lock.
Combination locks can be mechanical or electronic. But we will talk about the first group of mechanisms. Before installing any of these elements, you need to study them well. design features. Mechanical locks is more budget models, which are somewhat inferior in reliability to electronic ones. But still they are considered popular among customers in Moscow and the Moscow region. That is why they seek to install a combination lock on the door. mechanical design, and not any other.
What to do in the event that such a need arose? Naturally, we recommend contacting the best masters in their field of our company in Moscow.
Our advantages and principles of work will convince even inveterate skeptics that it is profitable to order the installation of a combination lock in a metal door at reasonable prices. Judge for yourself:
Do you have any questions? Do you want to know about the sequence of work? Would you like to receive information about the characteristics of combination locks? Then contact one of the company's professionals.
As a rule, overhead combination locks are much easier to install than mortise ones. A person without practical skills in this matter sometimes has difficulties. However, our masters will cope with this feasible and understandable task for them in just 20 minutes.
The main work should include the implementation of such procedures, namely:
These are just the main stages of work on installing a code lock. Of course, it is easier to talk or write about it than to do this work. Pseudo-masters are unlikely to successfully complete the work with a guarantee, especially since sometimes everything does not go according to plan. Especially if the canvas is of poor quality, and the combination lock is cheap or has factory defects.
Installation of combination locks in a metal door has been the company's specialization for more than 10 years. During this time, we have carried out the installation of locking mechanisms many times. We know how to install them correctly and securely so that it works properly. long years. If you want to additionally install a mechanical combination lock on the door, then we will be happy to help you with the implementation of this task!
If you need correct installation combination lock, please contact our company, with top-class masters, more than 10 years of experience and a huge number of satisfied customers. Otherwise, you can try to install the coded locking system yourself by studying the following recommendations:
Remark 1. The described algorithm allows you to install a mechanical code lock on the door. Installation of electromechanical combination locks includes a power supply.
Remark 2. If necessary, mechanical combination locks can be easily recoded by changing the orientation of the lever plates. For this operation, you only need a screwdriver, with which you will need to remove the top cover of the main locking block.
In this video, we want to show you how to install a combination lock on a door yourself.
Professional installation of all types of combination locks offered by our company is optimal solution to create reliable and durable locking systems based on years of experience and proven solutions.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom