How to remove the lock from the door?
The door lock has to be removed not only if it is replaced due to a breakdown. Like any other mechanism, the lock needs periodic cleaning and lubrication. It's not about complex structures modern doors which only a specialist can deal with. Knowing how to remove the lock from the door, you can solve this problem yourself.
How to replace the lock on the door depends on what type it belongs to.
Dismantling the overhead lock is not difficult. Rim locks are usually installed on wooden doors with inside using screws or self-tapping screws. They are less attractive, but allow you to maintain the strength of the structure. To remove the padlock from the door, just unscrew the fasteners.
This type of lock is mounted inside the door leaf in special hole. Mortise locks are more reliable and durable, so they are more often used. The most popular type of mortise locks are cylinder locks.
Before dismantling the cylinder mortise lock, need . The handle is also screwed to the door with self-tapping screws. Sometimes they are hidden under a decorative cover that can be put on tightly or screwed on. To remove the fittings, it is enough to pry it with a thin screwdriver or turn it counterclockwise. By unscrewing the screws, you can easily remove the handles on both sides of the door.
To repair or lubricate the cylinder lock, it is not necessary to remove it completely. As a rule, breakdowns occur in the lock cylinder. To remove it, at the end of the door, unscrew the middle bolt located on the lock bar. To neutralize defense mechanism, which holds the larva, insert the key into the lock and turn it 10-15 ° clockwise.
If the lock needs to be dismantled completely, the upper and lower bolts are unscrewed from the bar at the end of the door.
Sections of the article:
Most owners of apartments and houses prefer to entrust all activities related to the installation of interior doors to professionals in their field. Undoubtedly, good specialist will be able to produce high-quality installation of these structures. But there are also people who prefer everything or almost everything. repair work do it yourself, even at the risk of spoiling a thing or material. Installing a lock on a door is an example of how you can do part of the repair in your own hands. own house. True, before embarking on such a responsible type of work, it is necessary to study the theory of this process and carefully weigh all the pros and cons of an independent tie-in of the lock. In addition, it is necessary to assess the likely risks that exist when performing this type of work.
There are two technologies for inserting a lock into an interior door. Depending on which installation option you choose necessary set tools for this type of work. For professional lock insertion, you will need a set of high-precision modern electric tool. The second technology, which can also be called "artisanal", involves the use of only a hammer and a chisel. Everyone has the right to decide for himself how to embed the lock in the door. It should only be immediately emphasized that the result of an artisanal installation can seriously upset the owner of the home.
For high-quality and correct insertion of the lock, you will need a manual milling cutter. It is this tool that professionals use in their work. Manual milling cutter provides high accuracy and quality of preparation of seats for lock elements. An important point when performing work is to save decorative coating door leaf. It is the use of a tool with a high rotational speed of the cutter that allows you to achieve this result.
Except manual router you will need a hammer and chisels different widths. The latter will be useful specifically for the artisanal lock tie-in technology. With their help, you can prepare the landing recesses for the bar of the locking system. The result of working with such clumsy tools will largely depend on the skills and accuracy of the master. In addition, you will need an electric drill or screwdriver. They are used to create holes for door handles, as well as drilling recesses for the lock itself.
It is also necessary to prepare a flat and Phillips screwdrivers. It is these simple and reliable tools it is better to use for tightening the screws with which the handles and the lock are attached. If you use a screwdriver, then there is a possibility of damage to the decorative coating of the door if it jumps off the screw. You should also prepare a set of drill bits for a drill. With their help, you can cut out seats for the installation of the lock. In addition, when installing the locking mechanism, you will need a tape measure and a simple pencil. The following will detail how to insert the lock into the door.
After preparing everything you need to install the lock on the door of the tool, you can begin to work. The first step is to decide what position the door will occupy in the installed state. To decide on which side the hinges will be fixed, and on which the lock is embedded, you can attach the door leaf to the wall near the opening. After that, it is necessary to mark the places for inserting the lock. This process is simple and even a beginner can handle it. It follows from the lower edge of the door leaf with a tape measure to measure 800-900 mm. At this height, as a rule, the installation of locks and handles on the door is carried out.
After that, at the end of the door leaf, it is necessary to designate the center. For this, two marks are used, through which a straight line is drawn. It will serve as an indicator of the location of the axis of installation of the locking mechanism. It is this line that will be the main reference point in the implementation further work. After that, it is necessary to measure the length of the part of the lock that will be inside the door leaf. The resulting measurement result is divided in half. This value must be set aside from the marked installation point door handle along the previously drawn axis in both directions. The resulting segment sets the boundaries of the recess for the installation of the lock.
Now you need to drill the mounting hole. The first step is to measure the width of the part of the lock installed in the door. Based on this indicator, you need to choose the right drill bit for the drill. It should be a few millimeters wider than the measured dimensions of the part of the locking system cut into the door. After that, using a special drilling method, a recess is made under the lock insert. Doing it is necessary in the following way. First you need to install the drill on one of the extreme marks that limit the installation site, and go deeper by 1 cm.
After that, the drill moves a distance equal to half its diameter, and again a recess of 1 cm is made. Thus, it is necessary to make holes along the entire length of the lock installation site. Now you should return to the first recess and drill another 1 cm. The procedure is repeated for other holes already made until the required depth is provided for installing the lock. After preparing the landing recess, insert the lock into it and mark the sweat for the decorative part of the locking system with a pencil. Now the lock can be removed from the door leaf. The next step is to cut the sweat.
As mentioned above, it is best to carry out this operation using a manual milling cutter. In this case, you will get a neat recess. If the router is not available, you can use a set of chisels and a hammer. Before you start cutting out sweating, notches should be made along the entire previously drawn contour. For this, the chisel is placed perpendicular to the end of the door leaf and depressions are made with gentle blows of the hammer. Now it is necessary to remove the material of the door leaf to the thickness of the decorative strip of the locking system. In this case, work should be carried out as carefully and carefully as possible so as not to damage the decorative coating of the door.
At the final stage of installing the lock on the door, it is necessary to drill a hole for installing the door handle. To do this, using a tape measure, you need to transfer it to the door leaf. After that, a pen drill is installed in the drill, but of a larger diameter. Drilling a hole for the handles is necessary on both sides. Otherwise, there is a high probability of damage to the decorative coating of the door leaf. After the tip of the drill appears with reverse side door, you should stop drilling and continue it already in opposite direction. In the same way, preparation is carried out for the secret of the castle, if it is present in its design.
After that, you can assemble and install the locking system and handles. The lock is inserted into the end of the door leaf and fixed with screws. Then it is inserted and fixed with one screw from the side of the decorative strip of the lock. Now it remains only to install the mounting square in the hole and put the door handles on it, which are fixed with the screws or ties that come with the lock.
This is how the answer to the question of how to put the lock was obtained. If the work is done carefully and carefully, then the result of installing the locking mechanism on the door will meet all expectations. In addition to inserting a new lock into an interior door, it is also necessary to master the skills of dismantling the locking mechanism. This can be useful when replacing locks in an already operated door.
It would be opportune to say that the skills of dismantling door lock may come in handy when replacing old door to a new one. In this case, the lock can be removed and then installed on another door leaf. How to get the lock out of the door?
Dismantling a conventional lock is not difficult. To do this, unscrew the fixing screws from the decorative strip and slightly pry it with a thin flat screwdriver. It is much more difficult to pull out a lock equipped with a cylinder or a larva. In this case, dismantling is carried out in several stages. It would be nice to say that the cylinder can be pulled out separately from the lock. That is, if it is necessary to replace only the larva, then there is no need to remove the entire locking mechanism.
To dismantle the cylinder, unscrew the screw with which it is fixed. After removing the screw, press on the cylinder from either side of the door. A working mechanism should easily come out of the seat.
If the cylinder is broken, then you can use another way to remove the lock from the existing door. You can insert a key into the keyhole and rotate it until a position is found for unhindered dismantling of the cylinder from the door leaf.
After dismantling the larva, the entire lock is removed from the end of the door leaf. It should be mentioned that the square on which the door handles are put on can interfere with the dismantling of the locking mechanism. In this case, they also need to be dismantled. Door handles can be fastened with a screw or a steel ring. In the first option, you just need to unscrew the screw with a screwdriver. In the second case, you will need to pry off the locking ring. After removing the fixing elements, one of the door handles should be dismantled, and on the reverse side, pull the other. The mounting square should come out with the second handle. After that, you can remove the lock from the door leaf. As you can see, there is nothing super complicated in how to pull the lock out of the door.
Do you want to dismantle it? Or did you just decide to replace the old constipation with a new, more modern, reliable one? To do this, you need to know how to get a lock out of a door. In principle, there is nothing complicated in this work and it can be done in a few minutes with a conventional screwdriver.
Through this article, we will teach you how to get a lock out of a door. Take an ordinary screwdriver, the type of which (flat or Phillips) will depend on which screws or self-tapping screws are used in the lock. Remove all screws in the end plate locking device- usually they are located at the top and bottom of the bar.
Pry up the bar with a flat head screwdriver, the lock should give in easily. Hook carefully so as not to damage the canvas, even if it is the end part, which is almost always covered with a box, but still, aesthetics should always take place.
The case may not always be removed. The reason for this may be the internal secretion of the locking device - the so-called "larva". This is a special device that allows you to lock and unlock. Its peculiarity lies in the fact that in the event of a loss of a key or a breakdown of the “larva”, it is not at all necessary to change the entire locking mechanism. It is enough to purchase a new "larva" and replace it.
To pull out the "larva" you need to unscrew one more screw. It is also located on the end plate, exactly in the middle. Usually, it is unscrewed immediately with the first two screws. Getting rid of it, problems with that, how to get a lock out of a door you won't have any more.
Just press on the larva from either side of the door leaf and it will fall out. Pre-submit your hand so that it does not fall to the floor and is not damaged. Perhaps the product will still be useful to you.
In some models of locking devices, in order to dismantle the “larva” installed in them, you should put it in the required position. For this purpose, you need to use the "native" key. Thus, manufacturers increase the level of safety and security of the locking device, protecting it from possible knocking out, drilling and other methods of influence. Insert the key into the keyhole and turn it until you find the position in which the “larva” lock is released.
However, this is not all in the instructions on how how to get a lock out of a door. Even if you have removed the larva, the door handle, which is put on a square-section through axial pin, may interfere with the unhindered removal of the device from the door leaf.
In order to dismantle the handle, find the place of its fastening. It is located on the inside of the door leaf. Two types of fixtures can be used as fasteners:
The first is unscrewed with a small screwdriver, the second is hooked with it. This will allow you to remove , then drag the second handle with outer side door leaf.
The last real obstacle to how to get a lock out of a door can become decorative overlays. They are screwed to the door leaf from the inside with tightening screws passing through the body of the locking device. Unscrew them, remove the lining and pull out.
We hope now you will not have problems with this case, how to get a lock out of a door. Most importantly, do not leave unattended a door that does not have a locking mechanism. And be careful when choosing a new lock if you need it. The locking mechanism must be really reliable and fit exactly under the grooves and holes from the previous lock.
To figure out how to remove the lock from the door, you should first study the existing types:
Consider the main problems in which you have to think about how to disassemble the door lock:
Attention! Before carrying out repairs or assembling a new lock, it is worth practicing on the old one so that you don’t make mistakes on the “clean” version.
When disassembling this option, first remove the parts that are located on the canvas, remove the plugs from the door. After that, the place where the mounting screws are located will become available. They are carefully unscrewed to pull out the mechanism itself.
How to withdraw door lock latch? It is carefully removed from the canvas by unscrewing the end plate. When replacing, the counter plate must also be removed.
This version of the locking mechanism is most often installed in an interior door. It is made in the form of a conventional latch, but there are also more complex options that require a key to open.
How to disassemble the lock of this type? First, remove the handle by unscrewing the fixing screws with a special construction key or screwdriver. After that, remove the overlay, which served decorative element, and unscrew the fasteners. After the handle is removed, access to the mechanism will open.
Attention! To remove the mechanism, first remove the screws that hold the plate on the end. Only after that, all other parts and the tongue itself are removed.
Most often, this type of lock has a problem with a malfunction of the handle. Breakage may occur due to the fact that the handle has already served its purpose. Repair of this element is impossible, so the handle is replaced.
Option with handleSuch locks today are found in the device not only the entrance, but also the interior door. A key is used to open the mechanism. That is, we are talking about locks of a cylinder or lever type.
To remove the cylinder type lock, its front part is removed, thereby releasing the end plate. After this manipulation, using a screwdriver, the device itself is pulled out and removed.
The lever lock is even easier to remove. First you need to release the plate itself and then move the mechanism to the edge. Work must be done as carefully as possible so as not to damage the parts.
Attention! If it is not possible to remove the lock normally, then it will have to be knocked down. In this case, the castle will become unusable. But sometimes it is necessary to bring down the installation in order to install a new one.
If a Entrance door Equipped with a padlock, it is easy to remove it. To do this, unscrew the mounting bolts on both sides. After that, the lock can be easily removed.
When removed mortise lock you can use a special rod in the work. The design itself has special buttons near the handle and a small hole on one side. A rod is inserted into this hole, which looks like an awl. And there you can open the installation without problems and damage.
If you understand the theory, then in practice, disassembling the castle is not difficult. You can do everything yourself, without the involvement of professionals. Today, many different mechanisms are used, and each of the models has its own characteristics. To make it easier to complete the task, you need to draw a diagram that will help in the process.
How the lock is disassembled in practice is shown in our educational video.
In contact with
Comments
Unfortunately, there are no comments or reviews yet, but you can leave your own ...
Depending on the life situations skills, such as how to remove the lock from the door with your own hands, can come in handy. We will try to cover this issue in the article so that you can use our recommendations.
First, we prepare the tool: screwdrivers, hammer, pliers. It will be useful to find a diagram that describes step by step how to install a door lock. If this fails, we examine the door lock and casing to determine the type of constipation and draw up a plan of action. Next, we unlock the door, unscrew the stoppers and fasteners, armor plates, pull out the cylinder mechanism, remove the slats, unscrew from the vertical crossbars, unscrew the bolts and nuts, disengage the rods.
Removing the lock from the door is easier than mounting it, so you need to be careful not to damage the door and the trim.
To assemble and dismantle door locks we determine the appropriate actions according to the type of lock installed:
If the key is jammed, we drill out the larva.
The replacement process is reduced to the following steps:
For removal/installation interior locks self needed simple tools: chisel, drill, hammer and screwdriver. In some cases, a hex wrench may be required. Prepare for installation seat under the bar, holes for the door handle and a recess for the lock. Using ready scheme you can easily install any type interior lock: falevy uvula with the handle, a latch, the mechanism with a lock. Removal does not take much time and effort, and is carried out in the reverse order from installation.
With a constant mechanical load, handles (bath, kitchen, pantries) fail first of all. Then the question becomes relevant, how to pull the lock out of the door? The replacement process is simple and will require a wrench and a screwdriver. We do it as follows:
There are padlocks and mortise locks with a magnetic fastening mechanism, so removal is carried out according to the same scheme, you just need to disconnect the lock from the power source. When installing, you should strictly follow the instructions for the precise operation of the magnetic mechanism.
Unfortunately, locks sooner or later fall into disrepair. Knowing the device of the main types of constipation, installation and removal methods will allow you to try to fix them yourself, with your own hands, as well as save money and time.
First of all, you need to take care of removing the handle itself. To do this, you need to find and unscrew the fixing screw on the side or bottom with a screwdriver or hexagon. In the presence of decorative overlay remove it and unscrew the fixing screws. Then you can remove the handle together with the axial part. This will give you access to the lock mechanism.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom