Opening, replacement, installation of locks Fayn (Fine). Opening, replacement, installation of locks Fayn (Fine) Protective mechanisms and fittings

The Fayn company (Turkey) is the leading manufacturer of door fittings in its country and gradually Fayn locks begin to crowd out similar products on the international market. Fayn door locks are gradually finding consumers in the post-Soviet space, gaining popularity in many neighboring countries due to the optimal price-quality ratio.

Fayn lockpicking

The reasons why the door does not open are usually the same: a bunch of keys was lost, the lock was jammed, or the key in the lock was completely broken, but at the same time, there are a lot of cases when, after an incorrect installation on your own, you had to use Fayn emergency opening locks. If your door does not open, then you need to call a specialist in opening the lock, who will do it as carefully as possible without damaging the door and, most likely, the lock itself. After a professional opening, our specialist will offer you to replace only the lock cylinder, without resorting to high costs for its replacement.

The main advantages of Zamok2000:

• we will arrive within 30 minutes
• Fayn lock specialists
• opening without damaging the front door
• on the spot we can replace the lock cylinder with a new one or the lock with a more burglary-resistant one
• our service works around the clock
• we work all over Moscow
• competent specialists (Russian) and professional tools

The Zamok2000 company renders services in emergency opening of Fayn locks across all Moscow. Fast, high quality and inexpensive.

Installation of locks Fayn (Fine)

In addition to choosing the right lock, it is also very important to install it correctly. When installing the lock, the features of the door are taken into account:

• the material from which it is made;
• door thickness;
• the location of the stiffeners if the door is made of metal.

For aluminum profile doors, before installing the lock, it is necessary to measure the distance from the end of the profile to the glass, but usually special narrow-profile locks are used in such doors. Our specialists have extensive experience in installing Fayn locks, their maintenance and operation. All works are carried out qualitatively and professionally according to the requirements of the manufacturer.

Replacing locks Fayn (Fine)

In the event of a breakdown of the mechanical part of the lock, as well as with a strong desire to install another more durable and reliable lock, you need to contact the help of a Fayn lock replacement specialist. In most cases, the lock is replaced without replacing the door, so the first thing our specialist does is take all the necessary measurements of the traces (holes) of the old lock on the door, after which he selects a new lock that will hide the traces of the previous one. But in some cases, it may be necessary to rework the mounting holes, end holes, holes for installing cylinders and ties, as well as cutting new fasteners. Our specialist has all the necessary modern tools to replace the old lock with a new one without damaging the door. Departure of the specialist is carried out on the day of the application.

Replacing the larva and repairing the Fay lock (Fine)n

Usually, the lock cylinder is replaced in the following cases: after opening the Fayn lock (Fine), when the keys are lost and you don’t want to change the lock, the key inside the lock is broken, or when the tenants have changed, if you are renting an apartment. Almost all Fayn locks are cylinder locks and this is very convenient. You do not need to change the entire lock, but just call the master to the house, which in 10-15 minutes will simply replace the lock cylinder and issue a new set of keys.

On the website of the ZamkiTut online store, you can buy high-quality and reliable mortise locks with a cross-shaped key at affordable prices.

First of all, you need to understand what are cross locks? This term is understood as locks designed for doors with a cruciform cylinder (larva). It just so happened that in our country, Turkish models are considered the most common locks with a cross-shaped key. At the same time, you can purchase locks from various manufacturers from us: KaleKilit, Edson, Fayn, Italian Cisa and so on.

If we talk about the degree of secrecy, then a mortise lock with a cross-shaped key has a decent indicator - more than twenty thousand different combinations. At the same time, unfortunately, in terms of resistance to burglary, it is inferior to the same two-system locks, since it is not always able to resist even the most primitive methods. The fact is that the cylinder of such a lock is attached to the body with the help of two small and fragile screws.

How to order

Nevertheless, our company has collected for you exceptionally high-quality and reliable models. The price of a particular lock depends on the manufacturer, retail or wholesale purchase, delivery method and other factors.

Before buying locks, you should carefully study their technical and operational characteristics. Our consultants are ready to provide any information you need.

They say every home starts with the front door. You can continue this truth with a completely prosaic statement - each door, in turn, begins with a lock. It is he who becomes the key to security for everyone who is in the house, allows you to save the existing values ​​​​and ensure the desired privacy of your personal life. But, like any man-made product, the lock tends to break over time, yes, and the keys to it are a small thing that can get lost. In both of these cases, it becomes necessary to change the locks, and how this is done will allow a sense of calm and a sense of comfort to settle in your soul.

What can we offer?

• Replacement of cylinders (larvae) of door locks.
• We will help to completely replace the lock in a metal door with the installation of a product of both overhead and mortise types of any complexity of secrecy.
• We are engaged in the installation and maintenance of electromechanical locks, in particular, we work with their recoding and production of new keys.
• We install all anti-burglary protection systems accepted in world practice (armor plates, armor plates).
• Installation, insertion of locks in metal and wooden doors.
• We carry out repair of locks, doors, door handles of any complexity.
• Vinyl leather upholstery.
• Installation of panels, MDF overlays on doors.
• Emergency opening of door locks.
• We install video surveillance and access control systems.
• Repair and adjustment of entrance doors.
• Replacement and installation of door hardware.

In addition, we also have such specific services as working with complex stealth locks, we service door systems with any number and complexity of protective mechanisms. Often, a complete or partial replacement of the lock is not necessary, for example, when thieves tried to get in and only slightly damaged the lock structure, or the door frame sank, due to which it began to jam slightly. In this case, we recommend our customers to carry out an urgent repair of the locking system, we carry out regular preventive maintenance of the products installed by us.

How we are working?

• The manager on the phone will find out detailed information about your problem.
• The master in the shortest possible time leaves the place already with the necessary equipment.
• After completing the work, we issue a guarantee for the installed equipment and work.
• No weekends or lunch breaks.
• Throughout Moscow and the Moscow region.

Who do we work with?

• Among our clients are both private owners of houses and apartments, as well as numerous enterprises, owners of office, warehouse, garage complexes.
• A discount is provided for a social group of the population (disabled people, pensioners, large families).
• For legal entities, cashless payments are possible.

Why should you entrust the work to us?

Our range of locks and fittings

It's time to buy a new lock, but you have not yet decided which company's products to choose? we are ready to offer a huge selection of products: Italian, German, Austrian, Turkish, Chinese and domestic production. All the locks and accessories presented by us are of the highest quality, proven by our many years of experience. In our assortment, both expensive products and accessories, as well as a completely affordable price range of products that meet all safety requirements.

Our prospects

The high level of quality of service and convenience we have set for our customers certainly needs daily confirmation, and we intend to systematically raise it in order to make cooperation with our company profitable and enjoyable for you. We are working on expanding the already excellent range of lock systems and accessories, we are following the improvement of the skills of our craftsmen and we are trying to create conditions for maximum comfort for you, both in relation to ordering our services and purchasing lock products, and in terms of payment or concluding contractual relations for large clients.

We travel to any district, district of Moscow and the Moscow region.

On the territory of Russia and many countries of the former USSR, there are millions of Turkish locks Fayn, Kale, Ornek, ITO, DAF, with cross keys. In the 90s, these locks became wildly popular with domestic manufacturers of metal doors and, almost without a "fight", captured a huge part of the lock market in Russia.

Still they would not be popular, if only one type of keys from these locks, and it was actually a key-cross, brought potential customers of steel doors into awe. Especially when the manager placing an order for the manufacture of entrance metal doors, let's say Ostap, as if by the way, reported on the millions of combinations of the secret of these locks with round cross-shaped keys. And that they are almost impossible to open! The customers were delighted. Wah-ah-ah-ah-ah!!! … Castles Fine and Calais, with cross keys - it's super! Do you think such castles do not exist and this cannot be, this bastard lied? Maybe. Almost everyone is wiser now, but then ...

And then, that manager, perhaps, devoutly believed in what he was talking about or lied to naive people from the USSR. Almost Western locks, beautifully packaged, Turkish manufacturers almost gave their heads for chopping off and swore that their Fayn-Kale and other locks, with cross-shaped keys, were the height of perfection in modern "lock building" in Europe. So it turns out that Ostap is not to blame! Ostaps of that time also wanted to eat, just like today. At that time, it was very profitable for "Dverniks" to install locks of this type in metal doors: less work - more profit. Nobody canceled the laws of capitalism.

As an example. The famous "Klin metal door" economy class and one of the options for completing it with locks. The upper lock was installed by Fayn - Kale with cross keys, the lower one was installed with a VAZ cylinder mortise lock, also known as DAAZ ZV 4–3. Or, with the lower lock, any other mortise cylinder lock of a similar type could be installed, with a standard center distance for Russia of 55 millimeters, inherited from the USSR. As well as the lower locks, in the "Klin Metal Doors" and others like them, mega-popular locks such as the Belarusian mortise disc semi-automatic lock SHO-25 Baranovichi or the Ukrainian mortise cylinder lock ZAZ - Motor Sich ZV4-6 could be installed.

The upper lock in the cheap Klin metal doors, in addition to the Fayn-Kale locks, could also be the Ryazan CAM locks.

Yes, at the same time, you can look at this example, for a general development and understanding, what kind of doors these were - “Klin Steel Doors”. One ma-a-scarlet addition. They stood, stand and will stand for a long time in many people's apartments.

There could be such options for metal doors, which anyone wanted to call them: “Metal crab doors” or “Metal spider doors”, to impress solidity and at the same time fear on the customer. Fayn-Kale type locks with cross keys were also actively installed in these doors. And here is the type of door.

The lower lock in this door, with sliding bolts, is ITO, with cross-shaped keys.

ITO is the Turkish twin brother of Fayn-Kale castles. "In his place could have been Fayn or Kale!". But so the cards lay down, at that time, at the manufacturer of this metal door, and domestic locks could also be in these doors.

An ordinary option for completing metal door locks, for many manufacturers of steel doors at that time, was very popular and widespread.

That is why, at that time, castles of this type were transported from Turkey to Russia literally by trucks. "Unobtrusive advertising", expert consultants and managers, has done its job. This is how the demand for locks with cross keys from Turkish manufacturers Fayn, Kale, Ornek, ITO, DAF, arose in Russia. The laws of the market are inexorable. Demand creates supply. It got to the point that at one time these castles were even transported to Russia by shuttles, in the famous checkered trunks, and sold them in the markets, like any other consumer goods. They "went" literally to fly away.

But still, the Turkish manufacturers Fayn and Kale captured the main share of the market for locks with cross-shaped keys in Russia. But. “Not everything is Shrovetide for the cat”, a holy place is never empty. Soon, a counter stream of similar locks poured into the Russian lock market, no less powerful than from Turkey, from rapidly developing China. Chinese manufacturers of such locks, and even direct fakes for Fayn-Kale locks, began to aggressively dump prices and managed to win a significant market share from Turkish importers in a tough fight.

This is how, approximately, the Fayn-Kale locks appeared in Russia, with cross keys. Or, as they are also called, Fayn-Kale cross-key locks, or Fayn-Kale cross-key locks, or Fayn-Kale cross-key locks. As well as their clones from China.

Pretty soon it turned out that Fayn-Kale, locks with round cross keys, are not so super-duper reliable, both in terms of opening and breaking, and in terms of trouble-free operation of the cylinder mechanism installed in locks of this type. No matter how funny it sounds, but it was the “top-secret” interchangeable cylinders that turned out to be the weakest link in Turkish locks, with cross keys from Fayn, Kale, Ornek, ITO, DAF, and the like. How can you open these locks with cross keys, easily and simply, literally the entire Internet is crammed with information.

The mechanical part of Turkish locks of this type was also not up to par. Structural flaws and brittle material, brass alloys from which these Turkish cylinders are made, as well as improper operation of the locks, every day inexorably brought them closer to a pre-programmed breakdown and an Accident.

And this day, for many owners of metal doors, from various manufacturers, with Fine - Calais locks, has finally come. Ah-ah-ah! Crash. For someone it happened faster, for someone a little later, but these locks began to actively break, in the entrance steel doors, often, a lot and regularly. Why be surprised? These locks were installed in metal doors in Russia and the CIS countries, many millions. They must have broken at some point. The first statistics of characteristic breakdowns of locks with cross-shaped keys appeared, and “generic” sores of locks of this type got out.

None of the "doorkeepers" took into account what operating conditions these Turkish locks Fine-Kale, with a cross key, are designed for. Almost none of the manufacturers of metal doors with locks of this type instructed users how to use them, what to do and how to care for them, how to lubricate them, after all.

In Europe and Turkey, locks of this type were originally placed on various office cabinets, file storage, gun cabinets and mailboxes. Here, by the way, is a fiery greeting to Turkish locks, with cruciform keys, from the USSR.

Mailbox lock with cross keys made in the USSR.

In addition, locks with cross keys in Europe were mainly placed on lockers, in various institutions, on pseudo-safes, or even on windows, or on roller shutters, and on other minor objects that require minimal protection from the intrusion of unauthorized persons.

Here is a lock with cross keys for windows, various cabinets and doors.

And here is the bolt lock, with cross keys, which is installed on the roller shutters.

Of course, locks of this type were also installed there on various doors, but mostly on wooden ones. Let's say like this one.

Lock key-cross on a wooden door.

This, apparently, the grandmother installed such a mini-lock, with a cross key, on the door to her room in the family house, in Staffordshire, so that her granddaughter would not be naughty with friends without her ...

And in Russia, Fayn-Kale locks, with cross-shaped keys, began to be installed mainly on entrance metal doors to apartments. Where the daily "passage" and operation were, for these castles, although relatively acceptable, but on the verge of a foul. The fact is that normal steel doors are much heavier than wooden ones and the locks in such doors have their own characteristics in operation. Here, more careful opening of the lock is required, and care must be taken that the metal door does not hang with its entire mass on the locking bolts of the lock.

The steel door must be firmly fixed on the latch of the lock. In such doors, this is usually the bottom lock with handles. If the door is not fixed on the latch of the lock with handles, but hangs with its entire mass on the locking bolts, then the operator has to make additional efforts when opening any lock to open the door. This force is transmitted to the internal mechanism of the lock by the key, either directly, as in lever locks, or through the cylinder mechanism, where, in turn, the key is inserted.

So years pass, until at one fine moment the lock, with cruciform keys, does not break. Too thin and flimsy "nature" turned out to be at cylinders, locks Fine - Calais, with cross keys.

It would be nice to have apartments. But Fayn and Kale locks of this type were also actively installed on common, tambour doors, on several apartments, where the daily load on these locks increased several times. There are a lot of residents. In addition, on the locks installed on common doors, as a rule, there were not enough keys that came with the lock for all the inhabitants of the apartments. It is clear that in such a situation, people went to the nearest Metal Repair and ordered additional duplicate keys there. Sometimes these duplicate keys were not of very high quality, they were hard to get in and out of the lock.

Needless to say, after a certain amount of time, locks with cross-shaped keys Fine - Calais, began to massively fail on the entrance vestibule doors of various types and designs throughout Russia. When a lock breaks, any one, as a rule, is replaced with the same one, especially if it is installed in a metal door. But what's the point of changing Fayn-Kale locks with cross-shaped keys to exactly the same ones, if any master knows that in a few years it will break again. For many ignorant people, a counter question immediately arises: “Is it possible to change the lock in a metal door, previously “normally” installed in it by the manufacturer, and one more type and dimensions, for another lock, a different type, with other sizes and keys? »

The answer almost always sounds unequivocal: “Yes, of course, you can change the Fayn-Kale cross-key locks to locks of a different type!” And not only possible, but even necessary, and the sooner the better. What is done by the hands of one person can always be successfully remade by another person! This applies to almost any other lock installed on a steel door, and if it needs to be replaced. With the exception of some cases, as well as economic feasibility.

But what you can change the Turkish key-cross locks Fayn - Kale for, this is a separate story and article. Instead of these locks, you can put a lot of locks, for example, with keys of a "safe" type, or a cylinder lock, with perforated larvae and additional protection in the form of overhead or mortise armor plates. Moreover, both from the manufacturers of locks Fayn - Kale, and from many other manufacturers of locks from Russia, Italy, China and so on.

And again about the legends. The words of the managers who broadcast about the millions of Fayn-Kale secrets, locks with cross keys, turned out to be just publicized myths and nothing more. These locks began to be opened quite easily, in completely different ways, all and sundry. They became especially popular with drug addicts, as they did not require special knowledge, skills and qualifications from thieves and robbers who open these locks. This is how Turkish locks Fayn - Kale, with cross-shaped keys, and their Chinese clones and fakes have become favorite locks for thieves of all stripes. What they are, what they are not, all the same!

When the number of apartment robberies, with locks of this type installed in the front doors, exceeded many tens of thousands, our valiant police (and then the police) began to warn respectable citizens: “Citizens, urgently change the locks with cross keys, to others!” And at some police stations there were even ads with the same content and photographs of these locks, with the keys of the Fine-Calais cross. Things got to the point that in the morning TV shows of many TV channels, Russian citizens also began to be warned that they urgently changed the locks of this type installed on their doors, out of harm's way.

If you haven't changed Fayn - Kale Turkish cross-key locks yet, do it before it's too late. Forewarned is forearmed!

And what can be replaced with FAYN - KALE, locks with cross keys, this is a completely different story.

Many people do it even by themselves, without any problems. And some, on the contrary, have big or small problems with the replacement of such locks. It would seem that an absolutely similar lock was bought, but only from a different manufacturer, and a person cannot install it in any way. Wow. And how confidently and persistently the sellers convinced this person: “You will not have any problems with the replacement of such a lock, absolutely no problems.” And here it is not. It turns out that saying is one thing, but doing is quite another.

Fayn products are a guarantee of quality and are needed for a wide variety of needs. The predominant orientation of production is locks for interior doors, which can be used in home and office environments.

The activity of this Turkish company is aimed at issuing:

• compact locks (left-hand and right-hand opening)
• moisture-resistant locks for bathtubs and other sanitary facilities;
• cylinder mechanisms with bearings;
• locks of increased aesthetics;
• blanks for keys
• armor plates

Locks are the company's main production item. Designed for different bolt diameters, they can be used in alternative situations. The front plate looks very respectable in gold. This product of the company is ideal for interior doors of any apartment building, private house or public office, where separation of offices with lockable locks is a must.

Protective mechanisms and fittings

The company, striving to meet modern requirements, has released a number of products aimed at protecting the premises. For this purpose, brass-style armor plates are used. A large selection of cylinder mechanisms of different sizes is a sought-after product. The need for mechanisms is justified by the need for a device that fixes and moves the bolts of the lock. The color characteristics of the product are on top - rich and persistent shades will decorate the interior. Product quality is Fayn's hallmark, with particular emphasis on anti-corrosion formulations. Special coatings, applied in accordance with innovative requirements, guarantee the long-term service of any part.

Which area will require Fine products

A variety of locks - with a simple design and a more complex device, are an important element in the security of office and home premises. The ability to install these locks in interior doors makes them universal. The necessary goods can be ordered from us on the most favorable terms.