Self-painting the ceiling without streaks: a simple technology.

To make the ceiling surface in any of the rooms of your home flawless, you need to figure out how to properly paint the ceiling with a roller. Particular difficulties with the implementation of such a procedure when proper preparation to her no.

The simplicity and quality of coloring is determined, first of all, by what kind of paint you choose. Experts believe that it is ideal for ceilings. It guarantees a uniform and even coating on the treated surface. Similar result without special efforts able to achieve even House master who has minimal painting skills.

The water emulsion has no unpleasant odors, dries quickly enough, is non-toxic. And most importantly - it is characterized by an excellent level of adhesion to various types ceilings. Water-based paint will adhere perfectly to a layer of plaster or putty, on brick or concrete surface. The ceiling paint we are interested in can be acrylic, silicone or silicate. Compositions of the first type form a special film on the treated surface. It effectively retains water vapor, thereby protecting ceiling from destruction.

Water emulsion for the ceiling surface

Silicate compounds cannot stop fumes. But their service life is estimated at several tens of years. The most rational option for painting the ceiling can be considered silicone paints. They are characterized by a well-thought-out combination of low water absorption and increased vapor permeability. We add that it is customary to subdivide the water-based emulsion into several varieties depending on the gloss index of a particular composition. From this point of view, it can be: glossy, semi-matte, matte.

It is undesirable for inexperienced home craftsmen to process ceilings with glossy paints on their own. After their application, all (even the most insignificant) errors and irregularities will immediately appear on the surface.

One wrong stroke and all your work will go to waste - the ceiling will look sloppy and unattractive . But matte compositions are ideal for beginner painters. Such paints perfectly hide all sorts of flaws on the ceiling surfaces. To Work with matte paints much easier than with glossy and semi-gloss. When choosing a water emulsion, always remember this.

Even a beginner understands what to use for processing the ceiling surface paint brush doesn't make sense. Your hand will get tired very quickly holding such a tool. The brush is more suitable for painting the floor and walls. But the ceiling is better to handle with a roller. And not simple, but installed on a long handle. The greater the height of the room, the longer the handle should be.

Ceiling paint roller

1. Get rollers with natural pile. Velor tools take very little coloring composition. When using them, you are tormented, processing even a ceiling that is insignificant in area. Not suitable for the surfaces of interest to us and foam rollers. Their use is fraught with the formation of bubbles on the ceiling. The latter will absolutely leave unattractive spots on the treated surface, which will be very conspicuous.
2. Before painting, stock up on three rollers at once. One should be medium haired. With it, you will apply the final coat of paint. And the other two are taken with a short pile. They will be needed for primary surface treatment.

An important addition. If you have goats or a ladder at your disposal, you can use rollers with a short handle. Although it is always more convenient to work standing on the floor. Therefore, nevertheless, it is wiser to invest in a roller with a long handle. Or buy a regular tool, as well as an extension for it (an additional handle), which can be simple or telescopic. The latter is able to move up to 3-4 meters. With such a roller it is convenient to work in residential areas, even with very high heights.

The right choice of paint and roller will not help you perfectly paint the ceiling surface if you do not properly prepare it. Be sure to remove the old coating. If it was done with water-based paint, there will be no problems with cleaning the surface. In this case, you need to dilute a little of any detergent in water and wash off the old coating with it. If a different paint was previously used, the ceiling cleaning procedure may become more laborious. Soapy water is not enough here. Better buy special compound- washes.

They need to be applied with a brush on the old coating and wait a while. Ideally, unnecessary paint itself will lag behind the ceiling. In practice, to completely clean the surface, it is often necessary to apply washes several times. We recommend removing whitewash from the ceiling with a mixture of water and vinegar or a solvent. After such treatment, the surface must be without fail wash with soapy water and wait until it dries completely. If the old layer of whitewash is holding tight enough, use a spatula to remove it. This tool is also necessary for removing plaster from ceiling joints.

Ceiling Paint Remover

Plasterboard ceilings for painting are prepared even easier. They need to be wiped and covered with putty on the joints of individual sheets of drywall. Similarly, it is desirable to disguise the protruding (even slightly) caps used for fastening finishing products(screws, self-tapping screws). Note! Both concrete and plasterboard surfaces should be treated with primers after cleaning. The primer provides high viscosity of drywall sheets. Due to this, the paint on them will be applied much easier and faster.

And on concrete ceilings primer strengthens the plaster layer. Priming compositions are applied with a roller (usually foam rubber) in one layer. The last step in preparing the ceiling (brick, concrete) for painting is plastering. This procedure cannot be called easy. But without it, you will not be able to get a perfectly leveled surface. And without this, high-quality painting is unrealistic to achieve.

A beautiful ceiling surface will only be if you can apply paint on it in a uniform layer. To do this, you need to properly dilute the composition for staining. On a can of paint there is always a clear and detailed instructions. Guided by it, dilute the composition and start the painting process according to the following scheme:

1. Dip the roller (on one side only) in a container of paint and roll it over a piece of hardboard or linoleum, or even better - on a paint tray specially purchased for this purpose. Do not completely dip the tool into the paint composition and do not try to process the ceiling immediately after that. You are guaranteed to get non-painted surfaces. Immediately after drying, they will turn into clearly visible spots.
2. Apply the paint evenly to the ceiling with a roller. This requires you to work fairly quickly. The paint is recommended to be applied in strips. Their width is taken from 50 to 100 cm. Always lead the strips across the room. Then the joints between them will be almost invisible.
3. When the roller gives the surface all the paint on it, it is necessary to dip the tool again, roll it over the tray and continue painting. Important nuance. Each subsequent strip of paint is superimposed on the previous one by about 15–20 cm.

Applying paint to the ceiling in a uniform layer

According to the above algorithm, you need to paint the entire ceiling with the first layer. Then wait for it to dry and start re-applying paint. Now it is important to ensure that the joints of the new strip do not fall on the joints of the first. Apply as many coats of paint as you see fit. Regularly step back a little and examine the results of your labors with an unbiased look. If this is not done, there will be 100% bald spots on the ceiling.

It is optimal when another person observes your work and indicates on which area you need to apply a couple more stripes of paint. Apply the last coat with a medium pile roller. If you follow the described ceiling painting technology, you will get a truly perfect surface with impeccable views. Good luck to you!

One of the most common ways fine finish the ceiling during the repair of the premises is its painting.

The most common, economical and simple option ceiling finish is painting.

This is due to the wide variety of paints offered, the combination good quality material with reasonable prices and ease of finishing. You should consider the answer to the question: how is the ceiling painted with your own hands?

Preparatory work

To get a perfectly painted ceiling, you must first carry out thorough preparatory work.

They include:

• selection of quality tools;
• selection of the appropriate paint;
• correct surface treatment.

Painting the ceiling with your own hands will not take place without the materials and tools required for work. These include:

• dye;
• primer;
• putty;
• large and small rollers with long handles;
• a set of brushes of different sizes;
• containers for putty, primer and paint;
• spatulas (narrow and wide);
• sandpaper;
• skinner;
• brush on a long handle;
• abrasive mesh (if necessary);
• ladder;
• protective suit with headgear;
• glasses.

Modern construction market offers a variety of water-based paints suitable for any room. For interior decoration dry rooms are most suitable for acrylic, water-based, silicone paints. When repairing rooms with high humidity: in the kitchen, in the bathroom, toilet - you can use silicate paint, which contains antiseptic additives. Silicone paint is very high quality, combines the positive properties of acrylic and silicate painting materials, but has a rather high cost.

All of them are environmentally friendly, safe, vapor-permeable, practically odorless, easy to clean with soapy water.

Back to index

Preparation of the base of the ceiling for painting

Painting the ceiling begins with the preparation of its base. These works can be divided into several stages:

• cleaning from the old coating;
• putty;
• primer.

First of all, it is necessary to clean the surface of the ceiling from the old coating: wash off chalk whitewash, remove wallpaper, paint, beat off tiles, etc. After that, its evenness, the presence of cracks, drops, bulges are checked.

Considering that painting the ceiling implies an ideal flat surface, then, if necessary, it should be leveled with puttying. For large defects, start and finish putties must be applied.

The putty mixture is diluted in a prepared container, applied to the surface with a wide and narrow spatula. After drying finishing putty carefully cleaned with a skinner sandpaper.

A primer must be applied to the ceiling with a roller.

To improve the adhesive properties of the materials used, it is necessary to prime the entire ceiling surface. Before priming, the surface is cleaned of dust with a brush with a long handle. For the production of these works, a deep penetrating primer is used, completely ready for use, of good quality. Using a roller, it is applied evenly over the entire surface of the ceiling. After the primer has dried, a second primer coat is applied in the same way. Only after carrying out high-quality preparation, the paint will lie flat on the surface. The room where the repair is being done should be warm and dry. There should be no drafts.

Now you need to move on to a direct consideration of how to paint the ceiling according to all the rules.

Back to index

The technology of painting the ceiling with a roller and brush

Traffic patterns painting tools when painting the ceiling: a - with a roller; b - with a brush.

Painting the ceiling, as noted above, can be done independently in 2 different ways:

• traditional (with a roller and brush);
• using a vacuum cleaner or spray gun.

The most common is the first method of staining. How to paint the ceiling with a roller and brush? Painting work should be carried out in a special protective suit, headgear and goggles.

First of all, the corners are painted with a brush and hard-to-reach places: near pipes, decorative elements, lamps, etc.

First, with a brush, the corners of the room, opposite front door. After that, paint is applied around the entire perimeter of the ceiling with a brush in the form of a strip about 5 cm wide. This is necessary so that in the future, working with a roller, not to spoil the junctions of the walls with the ceiling and the corners.

The main painting of the ceiling is done with a long-handled roller or using a stepladder. A small amount of paint is poured into a pre-prepared wide container. After dipping the roller in the paint, you need to roll it a little in the container so that the paint is evenly distributed. Its excess can be removed with a brush.

Ceiling painting scheme: 1 - priming the surface, 2 - preparing the paint for work, 3 - painting the corners, 4, 5 - the first vertical and second horizontal layers of paint, 6 - cleaning the working tool from paint.

In order for the surface of the ceiling to turn out to be impeccable, at least 2 layers of paint must be applied to it. To avoid streaks, it is necessary to paint the ceiling perpendicular to the window during the first layer. The second layer of paint is applied to the surface in a direction perpendicular to the first layer. Only in this way will not arise on the ceiling of divorces. Before applying each next coat of paint, the previous one should dry well.

The mechanism of painting with a roller is simple: a small amount of paint is applied to the surface in parallel stripes, overlapping each other. It is important when working to avoid streaks and folds. The area to be painted must be carefully examined from various angles for defects in the painting in order to immediately eliminate them. At the end of the work, the painted ceiling with your own hands should be dried well. Brushes and rollers are washed in kerosene, turpentine, white spirit, and then in warm water with soap.

Any repair work it is customary to start from the ceiling, because even one drop of paint is enough to damage freshly glued wallpaper or expensive floor covering. Those times have already sunk into oblivion when the only type of ceiling decoration was its whitewashing. Today, painting the ceiling with acrylic paints allows you to emphasize the interior advantages by making the surface in any color tone and decorating with an original ceiling plinth.

Advantages of acrylic paints

The most popular and versatile colorants for the ceiling are paints on acrylic base. Acrylic paints have many advantages, which is why they occupy a leading position in the market among other substances. Let's consider them in more detail.

1. Acrylic paint is resistant to dirt and elastic, which means it can cover the smallest cracks - up to 0.5 millimeters. For this purpose, it is customary to apply the paint in several layers.
2. It is one of the most resistant substances to abrasion and ultraviolet radiation, so it does not lose its original color over time.
3. Acrylic compositions are not afraid of moisture, so the ceiling, painted acrylic paint, easy to wash and remove dirt from it. Also in this regard, it can be used in rooms with increased humidity, that is, in bathrooms and other damp rooms.
4. Acrylic paint is resistant to friction, calmly tolerates high temperature, it also has a fireproof effect, so it can be used in the kitchen.
5. Since acrylic paint belongs to the water-based group, it is not characterized by an unpleasant pungent odor, which is inherent in all coloring compositions based on an organic solvent.
6. Acrylic paints are quite easy to apply and dry very quickly, but you need to remember that acrylic darkens after drying.
7. The process of painting the surface with acrylic paint will not take much time for the owners and will take a lot of effort.
8. Acrylic paint is economical in costs and has a fairly reasonable price. The price of acrylic paint for the ceiling ranges from 200 to 800 rubles.
9. Concerning color palette, dissatisfied consumers will not remain, because the number of shades of acrylic paint can please the most sophisticated customers.

The choice of acrylic paint

To date, the most best paint is an acrylic water-based emulsion, which is produced on the basis of acrylic resins. Her undeniable advantage is high strength and elasticity. More affordable option vinyl-acrylic, acryl-silicon and styrene-acrylic compositions made on the basis of acrylic copolymers act.

Modern acrylic paint is a variety of types of compositions that differ in their consistency and composition. There are paints that are intended for painting ordinary dry rooms and bathroom paints with increased moisture resistance properties. It is not recommended to use these substances for other purposes, if the composition is intended for a dry room, it is necessary to use it there.

A solution of acrylic paint for the ceiling is most often sold in white, but you can achieve the desired shade with the help of special colors: depending on the level of saturation, it is customary to add the required number of tubes with the mixture. Also on sale are brands of acrylic paints with ready-made colors and shades.

According to the level of whiteness, all acrylic paints can be divided into 3 conventional ones. These are white, super white and milky white. For painting the ceiling, it is better to purchase the maximum white paint. However, remember that some manufacturers write “white” on a can of milky white paint, while others write on super white paint that this paint is “white”.

Therefore, ask the seller in the store to slightly open the lid of the paint bucket and compare the color of the composition in the bucket with a piece of white paper that is used for the printer that you should take with you. If the whiteness is similar, then a similar substance is suitable for painting the ceiling. When the seller does not meet you, then stipulate in advance that you require maximum whiteness, and that you will return the jar if this is not the case.

Acrylic suspended ceiling after drying, it has a glossy or matte surface. But when choosing a paint, remember that the haze for the ceiling is very important indicator along with its whiteness, it is one of the criteria for its impeccable appearance. The more matte the surface you get, the less noticeable various defects will be on it, for example, various bumps or uneven application of paint layers.

But if you want to make a colored ceiling, it is better to use glossy paints. It is advisable to choose this composition if your ceiling is perfectly flat and has a large quadrature. Also take this paint if the room is non-residential. Among domestic and foreign manufacturers, the products of Dulux, Tikkurila, Siro Mat Plus, Innetak, Himaton, Himos, Svyatozar, Supermatt are of high quality.

Surface preparation

Before painting the ceiling with acrylic paint, close plastic wrap or newspapers on the floor and all furniture, so as not to stain these surfaces during the preparation of the ceiling and its painting. For this reason, wear unnecessary clothing, rubber gloves, and a hat.

Then the ceiling should be cleaned of old whitewash and dust. To do this, periodically wetting in warm clean water roller or brush, walk over the entire area. Continue this cleaning procedure until the water into which the roller or brush is lowered ceases to become cloudy. Take Special attention joints of the ceiling with walls and corners, they should be washed with a brush.

If the ceiling is semi-matt or glossy, then it is recommended to add a little detergent to the water and treat the ceiling with sandpaper with grain number 8 after washing.

After that, you need to prime the surface. The primer is necessary to increase the adhesion of the ceiling to the future coloring composition, ensure the durability of the coating and prevent the formation of fungus and mold. Remember that you need to select putty and primer so that they are fully compatible. Since the ceiling needs to be painted already smooth and even, be sure to sand the dried putty with sandpaper to create a rough texture surface.

Also, before painting the surface with acrylic paint, perform an intermediate decoration of the ceiling with pre-prepared elements. You can buy rosettes, baguettes, borders and other details on the market or in a hardware store, it is also possible self-manufacturing such decor from improvised materials.

Mixing paint

The result of your work depends on whether the composition is prepared correctly or not to obtain the required density. Remember that thick paint is not able to hide the joints between the paint stripes. At this stage, dilute the paint with water to the consistency recommended by the manufacturer, and mix it with a mixer, as shown in the video on painting the ceiling with acrylic paint.

If the manufacturer recommends adding water to the paint, as a rule, it will require no more than 5-10%. It happens that the paint does not require to be diluted, then it simply says: “mix”, so simply mix the substance with great care. If it is supposed to paint the surface in one layer, then such mixing will be enough. Most the best option dilution of paint to the state of milk is considered.

If a film has formed on the surface, then it should not be mixed with the rest of the paint, since the dried paint is not able to dissolve. As a result of such mixing, a composition with lumps is obtained. Therefore, it is recommended to carefully remove the film, and strain the remaining substance and only then mix. You can add additional components against the fungus, which are highly resistant to washing.

Tool selection

When choosing how to paint the surface, you can stop your choice on a roller or brush. Each tool has its own characteristics. The use of a brush is justified in small areas. On large ceilings, it is better to use a roller. Let's figure out how to paint the ceiling with acrylic paint using a roller and brush.

Brush work

To keep the paint from dripping down the brush as you work, you can attach a foam roller to the handle just below the brush itself. When painting, the brush should be held at a slight angle or strictly perpendicular to the surface. When lowering the brush into the paint, make sure that the bristles do not touch the bottom, otherwise the tool will be deformed. When removing it, tap on the edge of the dish, removing excess paint from the bristles in this way, but in no case should you wipe the brush on the container.

Make even strokes to get wide stripes, after which these stripes should be shaded. Keep the brush handle as close to the surface as possible, and as you move, increase the angle of inclination.

If the smoothness of the surface is important to you, then try to apply strokes by crossing them. You need to do two strokes - the first up, and the next down, and it is recommended to carry them out in one area. When using a brush, it is necessary to rotate it periodically around the axis in order to prevent uneven wear of the bristles. It is also recommended to squeeze out the paint during the work.

When taking breaks in work, do not leave the brush to dry - it will be hard and unsuitable for further use. After finishing painting the ceiling with acrylic paint, you should thoroughly wash the brush so that no coloring composition remains on it. Most often they use turpentine or white spirit for these.

Roller work

When choosing which roller to paint the ceiling with, you need to proceed from the dimensions of the room; in any case, the size of the tool must correspond to it. It will be more convenient to work with a roller if you pour acrylic paint into a special container. In a similar tray, fill the paint to about half. The roller must be completely saturated during immersion.

After dipping the tool in a container of paint, roll it over a non-working surface - a mesh, a bath or a piece of wallpaper or unnecessary linoleum. This will allow you to more evenly distribute the coloring composition over the surface of the roller and, as a result, obtain a uniform coating. If you ignore this, then so-called “non-paints” will form on the ceiling, which form ugly spots on the dried surface.

Start the paint application process at a distance of about one meter from the corner. The beginning of work consists in distributing a plentiful layer of paint over the surface. The roller should be held away from you. When using a roller, place the strokes crosswise to each other, so the paint layer is more evenly distributed over the surface, and no traces of the roller will be visible.

Painting technology

Now let's figure out how to paint the ceiling with acrylic paint. From such a fact, with what effort you press the brush, the evenness of the surface will depend. Weak pressure will cause the paint to lay down in narrow stripes, while the layers will be thick and with gaps. And strong pressure will lead to the formation of streaks, but the resulting layers will be thinner.

If you are painting a ceiling with acrylic paint for the first time, it is recommended that you choose a "test site" for yourself somewhere in the country. You need to use light pressure, increasing it as the paint is spent.

It is better to start from the corners, with the help of a special brush, in order to paint over well and not to miss the unpainted areas. On the other hand, try to apply only one layer at a time and do not overlap already painted areas. Otherwise, areas of excellent color will appear on the ceiling. It is recommended to move in one direction.

The next layer is applied perpendicular to the first. And then it is recommended to smooth the paint and joints, for this, use a roller or brush without paint. Before you paint the ceiling a second time, evaluate the freshly painted surface from a different angle. Immediately fix the unpainted areas found, and if the paint is already drying, then mark these places, and in the process of the next painting, try to paint over these areas first.

However, it is impossible to cover up unpainted areas with thicker paint, it will be worse. The second layer should be liquid in order to blur the first one a little and eliminate defects along with it. But the places that are dyed twice, process with an almost dry roller.

After applying the first layer, it is wiser to wait until the first layer dries. Carefully read the instructions, it indicates the time that should be kept between applying coats of paint. Each layer is applied only after the previous one has completely dried.

If you start the second coat on a damp surface, the first may blur. Repeat the painting again, and apply the latter towards the light, making sure that there are no joints left. The ceiling is rarely covered with one layer of acrylic paint. Apply the composition of foreign production in two layers, but domestic - only in three layers.

After applying acrylic paint to the ceiling, it is recommended to wait a while (a couple of hours) and make sure that the entire surface is covered with paint and has an even color. But it also happens that you did everything right, and in the end you found that spots had formed! In this case, do not try to paint over the "holes", nothing will come of it. Arm yourself with fine sandpaper, preferably on a bar, and sand the ceiling.

Precisely the whole, otherwise the spotting will remain. This technique is considered effective if you applied 1-2 layers. But if more layers are applied, in this case the price acrylic ceiling doubles, because you will have only one way out: a complete rework, which includes grinding, putty and directly new painting ceiling.

Thus, you got acquainted with the advantages of acrylic paints. They differ in the type of destination. Exist coloring compositions for ordinary rooms and rooms where high moisture resistance is needed. It is not recommended to use moisture resistant paint that is intended for wet rooms, in dry rooms. This is primarily due to its high price.

Painting the ceiling is no more difficult than the usual whitewashing. But here, as elsewhere, there are little tricks.

Required materials and tools:

• roller suitable for your paint (acrylic or glycerophthalic)
• wide paint brush
• protective glasses
• protective helmet (cap with a visor)
• overalls
• ceiling paint
• adhesive tape and other materials to protect unpainted surfaces
• putty knife
• ladder (for example)

Process

Everything that does not need to be painted is taken out of the room or covered with shields. We collect all materials and tools in one place. In the prepared room, we install a platform, or scaffolding.

divorced water-dispersion paint the one you plan to use. This operation allows you to identify minor defects that are almost invisible on the puttied, but unpainted surface.

After puttying and grinding of defective areas, the ceiling is painted with undiluted paint. Apply paint to the prepared surface with a brush, roller or spray gun.

We start painting from the edges. We impose the first strip with a brush at the junction with the wall in which windows are made or there are some other protrusions or corners. Then we change the brush to the roller and draw a strip 50 cm wide and at least 1 m long. We impose each next strip so that adjacent strips slightly overlap each other.

Paint consumption is determined by its properties and, first of all, hiding power. Therefore, when buying paint, we advise you to pay attention not to the amount of paint in the can, but to the consumption of material per meter of surface.

When painting, pay attention to the direction of the applied coating. The last layer should be applied towards the light source (window), and the previous one across.

If you plan to apply paint with a roller, then for finish coat use a new lint roller middle length. Foam rollers, or rollers previously used for other purposes, are not recommended.

Remember that 2 or 3 coats of paint are always stronger than one but thick coat. Apply the paint several times, of course, after the previous one has completely dried.

At the end, we clean the joints between the strips so that the entire painted surface looks uniform - without gaps, clots and rarefactions.

In order not to spoil the work, at the end of the painting, do not arrange drafts in the room, and if direct sunlight enters the room, darken the windows. You should also not force the drying of whitewash by turning on any electrical appliances.

Ceiling painting (video):

Finishing the ceiling is the main stage of repair, which is quite laborious, especially if you introduce complex design elements into it. However, even simple painting ceiling will be a great addition to overall design and won't take long.

The dilemma of choosing tools for painting the ceiling is the first stage of repair. So what is better to paint the ceiling: with a brush or roller?

A few characteristics and advantages of each tool:

• If you have a big front of work, then here better fit a roller that will do all the work faster and better than a paint brush.
• With a brush, you can paint over the joints, however, working with this tool is physically more difficult. The roller can be used while standing in one place.
• Brushes do not require additional maintenance, and rollers should be kept in a special container that will protect them from drying out and damage.
• Painting the ceiling will be easier, since this tool (if it is of high quality) does not leave lint on the surface, and the brush is not protected from this.

In any case, when deciding which roller is better to choose for painting the ceiling, you should stock up on a couple or three brushes that can be used to paint over joints, corners and other small objects.

How to paint the ceiling with a roller: the process step by step

Painting the ceiling with a roller is not a very laborious process, since with a skillful approach and preparation, everything can be done. Finishing work for 2-3 hours. How to properly paint the ceiling with a roller - you can watch the video and painting tricks below if you decide to carry out this procedure yourself.

Painting the ceiling, in addition to the roller, will not do without such tools:

• Paints of the desired shade;
• paint roller;
• Finishing brushes;
• Containers for mixing paint;
• Napkins for cleaning.

Painting ceilings with rollers is divided into several stages. First of all, in order to properly paint the ceiling with a roller, you should clean the working area, wipe and dry.

1. Application of a primer that has a transparent texture and improves the adhesion area of ​​the paint to the ceiling. The primer can also be applied with a roller;
2. Next comes the roller for water-based paint for the ceiling. It is dipped in paint, after which it should be rolled a little on the surface so that excess paint is absorbed into the tool itself.
3. Painting should be done smoothly and without unnecessary movements in order to paint the ceiling without streaks with a roller, which is very simple to do. The paint is applied in one layer, then it is better to let it dry and apply a second. So the coating will be more uniform, and paint consumption is much less. All corners are painted over with a brush, as it is more convenient for performing these procedures.

The most important trick in painting the ceiling with a roller is that each subsequent layer should be applied directly perpendicular to the previous one - this way the paint will lie more evenly and the joints will not be so visible.

What kind of roller to paint the ceiling with water-based paint

Choosing a universal ceiling paint roller is not an easy task, and the variety of these tools can be confusing for everyone. Manufacturers even came up with the names of each model, a certain length of pile and a classification for paint rollers for painting the ceiling.

Namely:

• Rollers of universal type;
• Specialized rollers;
• Rollers for simple, finishing works;
• Rollers for a certain type of paint.

Each of these rollers has both similarities and differences. Experts will easily give you an answer to any question of interest.

The first thing to decide is the scope of work. If you need to paint the surface with large area, then it is better to choose a roller with a long pile, which absorbs more paint and allows you to make this process faster. For less paint consumption and better distribution over the ceiling, it is necessary to prime the surface. After that, the use of a roller for painting a ceiling with a long pile will be more rational.

What rollers are better to use for painting a ceiling with bumps? Here again, a roller with a long pile will come to the rescue, with which you can mask minor imperfections on surfaces.

A short-haired roller can be used if the application of color will take place on wallpaper or a plastered, smooth surface. In this case, there is a short pile roller, which makes the paint layer thinner.

The length of the pile of the ceiling roller is the main indicator, the choice of which determines the quality of the final result and the evenness of applying the paint itself to the ceiling.

Important! It is best to choose rollers from natural materials- they do not leave unwanted air bubbles on the paint and do not litter with villi that will be visible after drying.

The length of the roller for painting the ceiling is selected individually - the wider and longer the roller, the faster the painting process will be, but it will be easier for a beginner to work with a roller of a shorter length - it glides over the surface faster and more quickly, and it is also easier for them to adjust the pressure so as not to leave splits and inconsistencies. The final result directly depends on the quality of the roller and the analysis of the surface.

Painting ceilings with acrylic paint with a roller: tricks and life hacks

So how to qualitatively paint the ceiling with a roller and make it as easy as possible for everyone? There are some simple, old-fashioned tips that will help you paint the ceiling with a roller without unnecessary stress.

Simply and easily:

• The first thing you need to know is the mandatory distribution of paint over the roller. After you have dipped it in the paint, you need to roll it a couple of times on any test surface to get the paint deeper.
• The second is the application of the paint itself. The movements should be as smooth as possible and create an imaginary letter "W", and every second layer should overlap the first one perpendicularly.
• It is better to paint over all junctions and hard-to-reach corners with a brush - it will more quickly and accurately carry out this process.
• It is better to store the roller in a closed container so that it does not dry out and is not damaged. After use, the roller must be washed in a special solution to remove paint residues from it.

Painting the ceiling with a roller: tricks (video)

Rollers have long been included in the field of repair and strengthened in it, since Painting works with rollers are twice as easy and faster. Ceiling painting is a laborious and precise process, that's why it is the roller that is the very couple - the lifesaver that will help you create an incredible design of your ceiling - even and smooth, which will delight you for many years!