DIY cocoon hanging chair. How to make a hanging chair with your own hands and attach it to the ceiling

Mostly summer residents think about how to make a hanging chair with their own hands during the holidays. After all, it is not only convenient to use, but also decorates the entire summer cottage. When summer comes, all residents of megacities try to get out into nature. Some people can afford to go to the country for the whole season, while others come only for the weekend. Surely there is no person who would not like to swing in a hammock, listen to the birds singing and doze off. It’s easier to buy a hanging chair; besides, there are enough models, and everyone will find the best one for themselves. Some people will like a cocoon chair, while others will prefer a swing. But the cost of such furniture is quite high, so many people are thinking about making a hammock chair with their own hands.

Why not? After all, to make some models you can use materials (chairs, hoops, ropes, pieces of wood, etc.) that lie in the barn and take up space. For a hanging chair more complex model You may need materials that can be collected from nature or purchased. Some models will require you to know how to knit and weave, so making suspended structure The whole family will be involved. But first you need to figure out what types of chairs there are.

Types of swing chairs

For the first time, the mass distribution and great popularity of a hanging chair began in the middle of the last century - it was the peak of fashion. At this time, craftsmen came up with and implemented various designs and various elements, which made hanging chairs individual and different from each other. Here are some types:

1. A chair with a rigid frame made of wicker, plastic, metal or other material. The base is covered with fabric or braided with rods. The design principle is the same as that of a hammock.
2. The swing chair is made in the same way, only with soft frame. The seat can be of different sizes, and the fastening can be single.
3. A cocoon chair with a rigid frame and wicker walls. Distinctive feature this chair - inner space half closed from outside world.
4. A drop chair is a model that is mainly used in children's rooms. Is small house, in which you can play or sleep. There is enough space in it to lay out toys.

Do hanging hammock or a swing with your own hands is not very difficult, this task will require creativity and durable materials that will make the use of the chair safe.

What swing chairs can you make yourself?

You can make the swing chairs, which will be described below, yourself. The proposed options will not only be your favorite vacation spot, but also a unique highlight of your interior. summer cottage. Self-production will give you the opportunity to make your imagination come true.

Hanging swing

This version of the chair can be made from various materials. You will need:

1. The fabric is 2 m long and 1-1.2 m wide. Choose dense material, firstly, the denser it is, the greater the load it will withstand, and secondly, dense fabric will wear out less.
2. Centimeter, scissors, iron, sewing machine.
3. Wood block or plank.
4. Steel carabiner, rope made of nylon threads.

The fabric should be folded in half lengthwise and a line should be drawn not along the fold line so that when unfolded, you get a trapezoid. The result is not a hammock, but a hammock chair.

The upper and lower edges of the trapezoid must be hemmed and ironed, the sides must be folded twice at an angle of 90º, this will be a tunnel for the rope. The seam needs to be stitched.

In the wooden plank, you need to drill 2 holes on each side at a distance of 2 cm from each other. If you want, the block itself can be varnished or painted.

The ends of the rope must be burned so that they do not unravel, tie a knot on one side and pass through the holes, and then through one of the tunnels in the fabric. It should be taken into account that the loop you get is both the size of the chair and the height at which you will hang the swing. Therefore, before cutting the rope and tying a second knot, you need to make sure that everything suits you. After you pass the rope through the other side of the block, the loop behind the carabiner can be attached to the holder. Next, the rope must be passed through the second tunnel in the fabric and a second knot must be tied.

Braided option

To do this, you will need any material that is strong and flexible, it can be willow, bird cherry, rattan rods, bast or grapevine. You will need approximately 400 rods, 1-2 cm in diameter. The frame for the chair can be made of plastic or metal hoop. Weaving can be as follows:

1. First, a cross is made from 3-4 of the thickest rods; they must be tied with a rope soaked in glue. The length of the rods you take will determine how to hang the seat of the future chair.
2. The crosspiece is wrapped with a rod in such a way that the rod is either below or on top; when the rod ends, take another and continue until the required seat is obtained. As a rule, the size of the seat is about 80 cm. The last circle must be tied with a rope dipped in glue.
3. To make the back, you will need a hoop. You need to tie 5 cords to it, and attach the second ends of the cords to the seat and coat it with glue. Moreover, the front 2 cords should be shorter than the 3 rear ones, since the rear ones are the back. Next, 5 cords must be braided with any macrame weave. To make the back more durable, it can be reinforced with a couple of thicker rods. Then you need to attach slings to the hoop in 4 places, connect them with a carabiner and hang them on a hook.

It is more difficult to make a cocoon chair; for this you need to be proficient in the technique of weaving macrame. You will need two hoops: one with a diameter of 70 cm for the seat, the second with a diameter of 110 cm for the back. Can be used metal-plastic pipes with a cross section of 3.5 cm. First you need to determine what kind of frame you want. The entire central part of the hoop, which is intended for sitting, must be braided with dense and durable weaving. Next, attach the second hoop to the seat and tie cords around its entire circumference, which are attached with the other end to the second end of the seat. To ensure that the chair holds its shape, the back can be reinforced with several willow rods. Then, using the resulting frame, you can weave any macrame patterns. Attach a carabiner to the top of the hoop, which will be fixed to the hook.

When making hanging chairs yourself, we must not forget that they will have to withstand heavy loads, so the choice of material must be approached very responsibly. Weaving ropes, rods, fabrics, fastenings - everything must be designed to support the weight of a person. If you are making a swing for a child, keep in mind that it is unlikely that he will sit quietly in it; most likely, the child will jump, stand with his feet on the seat, etc.

All knots must be made double and tightened tightly. The ends of the ropes must be burned so that they do not unravel. Carabiners, fasteners and the actual hook on which the swing will hang must be made of durable metal and withstand high loads. For chairs woven from willow twigs, you must sew a couple of pillows, otherwise sitting on them will not be very comfortable.

There are a lot of options for hanging chairs, and it is not at all necessary to use ready-made drawings and diagrams. You can give free rein to your imagination and create a unique chair that no one else has. The main thing is to understand the principle of construction, and then you can fantasize as much as you like.

If the dacha is designed in a certain style, then in order for the hanging chair not to be dissonant, it is necessary to harmoniously fit it into general interior or at least focus on color scheme. You can hang the chair either on a strong tree branch or on a metal L-shaped structure, which must be concreted for safety reasons.

Hanging chairs are an alternative to a rocking chair on runners at home and a hammock in nature. Comfort and gentle rocking will help you relax and unwind after a hard day. The variety of models and materials for manufacturing allows you to harmoniously integrate such a chair into any interior. And you don’t have to spend money on a purchase. Some models are easy to make with your own hands.

Types of hanging chairs

They produce a wide variety of models and designs. They can be made of wood, metal, rattan, wicker, transparent plastic. There are models that you can make yourself without any problems.

1. Swing chair. Fastening is carried out at two points. Due to this, the structure swings in one plane. There are soft models (chair-hammock) or on a rigid frame:
   • the basis of the first option is a soft fabric or wicker fabric, which is easy to sew, weave using the macrame technique or crochet - the ends of the panel are attached to the transverse rod with 4 slings, and it is already suspended from the ceiling or a leg stand;
   • the second option has a rigid frame made of acrylic, plastic, wood, rattan or metal in the form of a hoop covered with a soft base.
2. Nest chair. The basis of the design consists of 2 durable hoops. The model has flat bottom and low sides, which are braided with cord, rope or tied with strong threads.
3. The cocoon chair (egg) differs from its counterparts in its greater closedness, often up to 70%. Back and side surfaces tall and connected above the head. The rigid frame is braided suitable material or covered with fabric. Varieties of this model - basket chair and drop chair - perfect option for a children's room.

Hanging chairs of different shapes - gallery

Finishing techniques and materials

Such chairs usually have a rigid frame and a seat made of various materials.

1. Textile. An affordable and easy-to-work material, the density and strength of which is selected based on the expected load. A raincoat or tarpaulin will do. A chair for children made from old jeans with pockets and rivets looks original.
2. Knitted fabric. Craftsmen who master the technique of knitting or crocheting can use their skills to create an original chair from plain or multi-colored threads.
3. Macrame. Weaving from a durable cord will not only last a long time, but will also add a special flavor to any interior.
4. Vine, rattan. Armchairs made from environmentally friendly materials, will decorate any interior, but working with them requires special skills. In addition, rattan does not grow in our country.

This is interesting! Unusual and very durable material for braiding a chair - thread from plastic bottles. This chair will not get wet, will not become deformed, and can be hung outside.

Frame material

The base of the chair can be made from different materials.

1. Gymnastic hoop. Only suitable for child seat, for an adult its strength is not enough, since the cross-sectional diameter is 16 mm, and for the frame of the chair you need 2 times more.
2. Metal pipe. The product made from it will be durable, but heavy - at least 7 kg. To make it you will need pipe bending equipment.
3. Tree. The design will be durable, lightweight, and environmentally friendly. Since the material absorbs moisture and dries out in the sun, wood for outdoor chairs must be treated with impregnations. This will protect the material from rotting.
4. Metal-plastic pipes. Durable, lightweight and non-corrosive material. When using coiled pipes, there is no need to bend them. The ends of the segment are connected with a wooden or plastic insert and secured with self-tapping screws.

You should not use old material when making a chair: such furniture will not last long.

Hanging rockers made of various materials - gallery

Making a hanging chair with your own hands

Hanging chair, made with your own hands, will look good in the country house or on the veranda of a private house. The easiest to make is a hammock chair. It can be done in several ways from different materials, but the most convenient and uncomplicated of them are macrame or textiles.

Hammock without frame

To work you will need:

• dense fabric - 1.5x1.5 m;
• durable cord;
• wooden rod for fastening;
• sewing supplies.

After preparing everything you need, proceed to the assembly process.

Swing on a rigid frame

To make it you will need:

• hoop with a diameter of 90–95 cm;
• durable fabric 3 m long and 1.5 m wide;
• zipper - 90–95 cm;
• strong cord or rope - 10 m;
• metal rings for attaching the structure to the ceiling;
• interlining;
• scissors;
• tape measure;
• sewing supplies.

When all materials are prepared, proceed to making the chair.

1. Fold the fabric in half and lay it on a flat surface.
2. Place the hoop in the center, at a distance of 20–25 cm from it, apply markings along the circumference and connect the marks with a line. Cut out 2 circles.
3. On one of the blanks, make a cut through the center with a length equal to the diameter of the hoop, sew a zipper in this place.
4. Connect both pieces with a seam around the circumference.
5. Make cutouts on the finished case for attaching ropes to a hoop 10 cm long. To do this, fold the case in half and measure 45 ° C from the fold line in one direction, 30 ° C in the other, put marks.
6. Duplicate the marks on the second part of the circle. The distance between the cutouts in the front of the chair should be greater than in the back.
7. Seal the slits with tape.
8. Wrap the hoop with a strip of padding polyester and connect it with a seam to secure it.
9. Insert the hoop into the case and fasten the zipper.
10. Cut the cord into 4 pieces, 2.2 and 2.8 m long. Fold each piece in half and secure it to the hoop. To do this, thread a loop through the hole in the cover, and insert the ends of the cord through it and tighten them. Long cords should be in the front of the chair, and short cords should be in the back.
11. Tie a short and a long cord with right side to one ring, from the left to the other. Make strong knots.
12. Hang the rings from the ceiling, beam, or thick tree branch outside.
13. Place pillows inside or sew a round mattress. This will make the chair even more comfortable.

Instructions for making a rocking chair from a hoop - video

How to make a wicker nest chair: step by step photos

By making the seat flat and providing the structure with sides, you can get a nest chair. For this rocking chair you will need:

• two hoops made of metal-plastic pipe with a cross-section of 35 mm: for the seat with a diameter of 70 cm, for the back - 110 cm;
• polyamide cord 4 mm thick - 900 m;
• sling or strong rope - 12 m;
• a thicker cord to connect the seat and backrest.

To make this chair you need to know how to weave.

1. First, braid both hoops:
   • wrap the pipe with a cord (it is worth taking a cord with a polypropylene core, as it will help make a stronger binding);
   • Stretch the thread well (each next turn should fit evenly and tightly to the previous one);
   • every 20 turns, secure the thread, stretching it as much as possible and twisting it;
   • For greater strength coat the weaving with glue.
2. At equal intervals, fasten pieces of double-folded cord onto the braid of the hoop with a double loop. They should take up half the length of the hoop.
3. Using flat knots in a checkerboard pattern, weave the bottom of the chair, securing the remaining ends to the free semicircle. The tension on the cords when weaving should be quite strong. It’s okay if the hoop is slightly deformed; the shape will be restored in the future.
4. Connect the finished seat and the back hoop by tying them to each other with a cord in the front part of the structure.
5. At the back, connect the seat and the backrest hoop with two wooden spacer rods, making cuts in their ends for strong fastening. The length of the spacers is selected in accordance with the desired backrest height.
6. Attach cords to the upper arch of the back and weave from top to bottom. Attach the remaining cords to the seat and form them into tassels.
7. Connect the upper arch of the backrest and the seat with a thick cord parallel to the spacers, and then remove them.
8. Tie the slings to the finished structure. They also need to be made using the macrame technique from cords.
9. Hang the chair.

Weaving “checkerboard” using the macrame technique - video

How to make an egg chair at home

Chair-egg (cocoon) - the most difficult option for the home handyman. The design is closed on three sides, and the side surfaces and back close together above the head.

1. For work, you can use metal-plastic pipes, assembling a frame from a hoop and additional arcs. To give additional rigidity, the structure is strengthened with several horizontal arcs, the elements are connected to each other with self-tapping screws.
2. The finished frame is braided with cord using the macrame technique, covered with fabric or crocheted.
3. For someone who knows how to work with wood, it’s easy to cut the frame out of thick plywood.

Children's cocoon chair made of fabric

For children, a cocoon chair can be made from fabric. It does not take up much space, will fit organically into the interior of a child’s room and is not dangerous.

To make it you will need:

• 2 meters of dense fabric 1.5 m wide;
• lightning;
• pillow or inflatable balloon;
• sewing supplies.

The technique for making a cocoon is not complicated, the main thing is to follow the instructions.

Instead of a pillow or an inflatable chamber, you can insert a hoop into the bottom of the chair, then you will get a drop chair.

How to make a baby cocoon chair - video

Attaching suspended rockers to the ceiling, stand, beam

For any suspended structures, the main thing is reliable fastening. The safety of those who will use the chair depends on it. There are several installation options:

• to the ceiling;
• to the leg stand;
• to a tree branch or beam (for the street).

If indoors suspended ceiling, then installing the mount will be problematic. In this case, you need to mount the structure before attaching the ceiling or you should purchase a special stand-leg.

Let's consider different variants installation

1. You can drill a hole in the concrete ceiling and install a powerful anchor with a hook into it for hanging the structure. Available for sale special sets consisting of an anchor, a hook and a chain. The fastener must support a weight of at least 120 kg.
2. The voids in the ceiling through the hole must be filled with a special solution made from high-strength polymers - chemical anchors. Such compositions are sold in tubes for construction syringes. Then you need to insert the anchor into the hole and wait a day until the composition dries completely.
3. For ceilings with strong floor beams or for terraces and outdoors, bolting is suitable.
4. For suspended ceiling It is worth purchasing a special suspension that has a bracket that is attached to the concrete ceiling and comes out through the suspension. A hook is screwed to it.

   The mounting bracket is installed on concrete ceiling, then a hook is screwed to it

5. The slings are tied to a tree branch with a strong knot.
6. The stand-leg can be purchased at the store. It is convenient because the chair is not permanently fixed in one place and can be moved, and, if necessary, disassembled and transported.

Drawing of a stand for making it yourself

You can actually make the simplest leg stand for a hanging chair yourself.

1. The wooden stand consists of only 5 parts, but without special equipment It will not be possible to make it, all the parts are bent.
2. The most common option is a metal stand. To make it you will need metal pipe, pipe bending equipment and welding.
3. A simple version of a metal stand: the design does not require complex drawings or special skills.

   For stability, a simple metal stand is attached to a vertical support with a chain or cable

To fully relax, you don’t have to spend a lot of money. If you approach the matter creatively, relaxation will become not only the relaxation in the hanging chair, but also the process of making it. And the product will cause legitimate pride.

A dacha is a place not only for intensive work, but also for have a nice rest, so it’s hard to imagine a garden area without a hammock or swing. In gardening stores today you can find designs for children and adults different shapes and dimensions. If you don't want to spend money, try making your own garden furniture. In this article we will tell you how to make a comfortable DIY hanging chair and decorate personal plot country house or .

Materials:

- metal hoops;
— slings;
- cord;
- centimeter;
- wooden rods.

Master class on making a hanging chair for a summer house

If you haven’t found hoops of different sizes, you can make them yourself from PVC pipes with a cross-section of 3.5 cm. Decide on the size of the chair and calculate the length of the pipe using the formula:

L=3.14*d, where L is the length of the PVC pipe, and d is the diameter of the ring.

For example, if you need to make a hoop with a diameter of 100 cm, you need to measure 100 * 3.14 = 314 cm of pipe. To connect the ends of the pipe, you can use inserts made of wood or plastic.

It is better to braid hoops with polyamide rope 0.4 cm thick, as it is more durable and at the same time soft to the touch. It’s better to buy a lot of cord in advance so that there is enough for the entire product, at the rate of 400 cm of cord per 100 cm of hoop. The winding should be uniform, and to increase its strength, tighten it every 10-20 twists.

Now you can start weaving the mesh using the macrame technique. You can choose any pattern, for example, checkerboard with flat knots or any other. Monitor the tension of the rope during weaving, as the beauty of the product, as well as the strength of the finished cross, depends on this. You can turn the remaining ends into a fringe that will hang beautifully.

After the hoops are braided, they can be assembled into finished design. Start by braiding them together at one end with a cord. To make the back, wooden rods are inserted. It is best to make cuts at the ends of the rods so that they do not slip off.

You can also braid the back with any pattern, but it’s better to start at the top and work your way down. When the chair is ready, you need to attach the slings and hang the product in a convenient place.

Watch this useful video: Weaving with ropes for a chair

Master class garden chair with fabric cover

If you are not familiar with the macrame technique and do not want to weave, you can make a chair with a fabric cover. To make it you will need a hoop with a diameter of 0.9 m, 3.0 meters of durable fabric, metal rings and buckles, braid and slings.

From a piece of fabric you need to cut two squares measuring 150*150 cm. In order to make a circle, the squares need to be folded four times, measure 0.65 m and cut. At a distance of 40 mm, measure the outline with strokes.

Now you need to mark the cutouts for the slings, so the circle is folded four times and marks are made relative to the bend lines. The first two slings will be located at an angle of 45 degrees, and the second - 30. The slots should be 10*15 in size.

To make them on the second circle, connect the parts and make a mark. Two circles need to be sewn on a machine along the marked line so that there is a hole left for the hoop. Cut strips 6-8 cm wide from padding polyester and cover the hoop.

The case needs to be filled with padding polyester and secured to the hoop. All that remains is to attach the slings and secure them into one suspension on a metal ring.

Hanging seats have been popular for a long time. Most often they are made from rattan, as they are highly durable and lightweight.

Semicircular structures are very convenient for relaxation, and you can hang them on a tree or other support. The shape of hanging furniture can be completely different, so each owner of a country house chooses the most suitable options for himself.

On the market garden furniture You can find hanging furniture made of plastic, wicker, acrylic or rattan, each with its own advantages and disadvantages.

To make the seat soft, the set includes decorative pillows or mattresses. There are many options for designing a sitting area, so you can either make garden furniture yourself or buy ready-made products.

A hanging chair can be hung not only on a tree branch, but also in a gazebo. To do this, you will have to build a suspended structure that will support not only the furniture itself, but also the weight of a person.

Watch the video: Hanging chairs - romance in the home

The advantage of the chair is that it will fully meet your needs and harmonize with the overall landscape design.

DIY hanging chairs are a guarantee of receiving individual and stylish design. Hanging or hanging chairs can have different sizes and shape. The designs also differ in the type of materials used for manufacturing.

Currently, you can purchase ready-made metal chair or a product made of rattan and fabric, but it is absolutely easy to make such a design yourself, Having studied the drawings and become familiar with the main types:

• wicker chair suspended from the ceiling;
• “bubble” model in the form of a ball;
• hanging hammock chair;
• frameless hanging models made exclusively from dense and reliable fabrics;
• openwork hanging cocoon chair or an egg chair.

Hanging models are suspended from ceiling structures or attached to wooden beams. However, in last years A rocking chair mounted on a special metal stand came into fashion. If necessary, the model can be easily replaced in the interior regular chair. This frame is fixed to the floor, so the design has a number of advantages, presented by:

• mobility. Can be moved or installed as desired anywhere in the room, as well as outdoors;
• the ability to detach from the stand and hang from the ceiling.

Wicker models made of wicker or rattan, as well as those created on the basis of transparent acrylic or plastic, have a fairly rigid body, so ease of use is most often complemented by different sizes decorative pillows or soft small mattresses. The hammock chair is more soft option suspended structure, due to which it belongs to the most popular category. A “cocoon” model or a round wicker product, closed on three sides with woven walls, is ideal for moments of solitude and abstraction from the outside bustle. You can get a lighter, more flexible and quieter structure by replacing traditional rattan or wicker with modern, reliable, durable synthetic materials.

How to make a hanging hammock chair with your own hands

A correctly selected option fits organically into both the interior of the living space and the landscape local area.Most simple option is to use a hoop to create fabric, rather than a wicker model.

Small home models are designed for indoor use, so they can be made from materials that are not unstable to frost, rain and temperature changes. Garden or street structures can be installed both indoors and outdoors, fixed to the external beams of the building or floors. In this case, the most stable materials are used and can be represented by artificial rattan, metal and plastic.

Types of hanging chairs (video)

Master class on making a cocoon chair on a stand

The master class is a great opportunity to make your own model, which will take into account all your personal wishes and will not require significant expenses. Hanging model can be made using any technique, and the main difference is presented self-production a reliable and stable stand made of metal or wood.

Hanging option made of natural linen, practical to use and can be washed in a regular washing machine, therefore most often used in children's rooms and outdoor conditions.

Materials and tools are presented:

• one oak stick;
• a couple of meters of durable linen fabric;
• reliable rope;
• carabiner for fastening.

Also for work you need to prepare sewing machine, acrylic fabric paint and brush, drill with drill bits, marker, ruler or centimeter, sharp scissors and iron with steamer.

Step-by-step instruction to create a tissue model:

• the fabric piece is folded in half and measured from the right top corner 18 cm;
• from the resulting current a line is drawn towards the bottom of the fabric;
• the resulting triangular element is carefully cut off, and the fabric piece is unfolded;
• a hem of one and a half centimeters is carried out top edge and the fabric is fixed in this position using a hot iron;
• a fold is sewn along the bottom of the fabric strip;
• rope pockets are made and a rope is threaded through each side;
• the corners are folded by 40 mm and ironed, after which they are stitched;
• the process is repeated on the second side of the fabric;
• on a wooden stick you need to measure 50 mm and 100 mm sections and drill holes;
• onto the canvas using acrylic paint Any design is applied with a brush.

At the final stage, all that remains is to make a knot on one stretched rope, leaving a section for threading through the pocket on the seat. The second knot is tied at a distance of 80 mm, after which the rope is threaded through the second hole. The same operation is carried out with another fastening pocket. A pair of carabiners are attached to a fixed rack hook and the finished hammock chair is hung.

For mounting, it is best to use special ready-made racks on circular platforms, which are the most mobile. The axial option involves attaching the chair not only to the ceiling, but also to the floor. This option is the safest and most convenient, therefore it is widely used when decorating children's rooms.

How to make a hammock chair with your own hands (video)

Making a hammock chair from a hoop

• a metal hoop to create a seat with a diameter of 70 cm and a cross section of 35 mm;
• a metal hoop to create a backrest with a diameter of 110 cm and a cross-section of 35 mm;
• durable and reliable polyamide cord in the amount of 900 m;
• synthetic slings in the amount of 12 m;
• a pair of fairly thick and strong cords used to connect the rings;
• a pair of wooden rods;
• sharp scissors, tape measure and work gloves.

The weaving technology is as follows:

• wrapping of hoops, consisting of a complete and maximally dense coating with good tension metal surface hoops with cord. As a rule, the cord consumption is about 40 m per meter of surface;
• to improve the density of the coating, every twenty turns you need to make a standard tightening with force, which will allow you to get not only dense, but also the maximum flat surface completed braid;
• weaving a mesh with any pattern using the macrame technique. Professionals recommend using the “checkerboard pattern with flat knots” for this purpose. Weaving is done with a double cord made of polyamide, and fixation to the designed braid of the hoop is done using double knots. It is allowed to form fringe knots from the free ends.

At the final stage, the final assembly of the entire structure is performed. The braided hoops are joined on one side by a cord wrap. A pair of wooden rods are installed on the opposite edge from the winding, used as a support for the back. The length of such support rods can be arbitrary. Weaving the back is also done in a random pattern and starts at the top with a gradual descent towards the seat. On finished product slings are attached, by which the structure is suspended.

How to properly secure a hanging chair to the ceiling

There are several convenient, practical and reliable options that allow you to properly fix a hanging chair to the ceiling. Standard ceiling hooks are the most common and popular mounting option. However need to remember that this method of fastening can be safely implemented only in cases where the ceiling part is represented by a concrete non-hollow floor or durable ceiling beams. Before fastening, you should ensure that the load capacity is consistent.

If there is a hollow or not very reliable ceiling, V mandatory other fastening methods must be used, which can be represented by a modern and strong fastening rail installed on a fragment of the base ceiling or mounted around the perimeter of the entire room. Such the system is widely used when it is necessary to effectively distribute the entire load, which will fall on the structure suspended from the ceiling.

Less common, but quite reliable, is the use of a chemical anchor. In this case, a special paste-like modern solution is pumped into the ceiling cavity using a conventional construction syringe. polymer composition, into which the fastenings of the suspended structure are mounted. After this composition hardens, the installed elements are firmly fixed.

How to make a chair from a metal hoop (video)

The very first model of a hanging chair was created by a Danish designer back in the middle of the last century. Since then, the design has undergone numerous changes and improvements, but has not lost its relevance. If you have some skills and follow the basic technology, there is a great opportunity to independently create such an unusual, but very popular decorative element.

(20 ratings, average: 4,30 out of 5)

Work days modern man keep him in suspense. Weekends allow you to relieve fatigue, during which you need to restore strength and completely escape from the hardships of everyday life. Many city residents go to their dachas outside the city for the weekend. This allows you to be in nature and completely relax from the bustle of the city.

Those who stay in the city for the weekend can be offered a lot of devices for relaxation and rest, one of which is a hanging chair that resembles swing. Ready model You can buy it in the store to save a little family budget, you can do it yourself. The device is used not only in the apartment, but also in nature, in country house or at the dacha.

Hanging chair

Such a device became known from a designer from Denmark in the middle of the last century. As before, this item is classified as designer furniture. It is used in a country house or apartment. Modern materials are used for its production, it is made unusual shape, and an ergonomic design is created.

A hanging chair is a comfortable and convenient bed made of modern materials or wicker or rattan. They fasten it to the ceiling using a hook. Thanks to this fastening, you can ride in the chair as if you were a child on a swing. An example would be Ikea hanging chairs.

This piece of furniture is essential for those who love to swing. Having settled down comfortably on the pillows, taking a book in your hands, you can sway a little and immerse yourself in a world of tranquility.

Types of chairs

Depending on the material used, products are divided into the following types:

1. Armchair with rigid frame. It can be made from rattan, wicker or modern materials: plastic or acrylic. For comfort, you can put a pillow on the seat or soft mattress.
2. . The design is similar to a hammock, but differs in size and fastening. This option is softer. If you swing on soft pillows such a hammock chair, you can perfectly relax and unwind. It is not difficult to make such a chair with your own hands.
3. hanging. This model differs from the others in that it is ¾ closed. This makes it possible to completely disconnect from the outside world and bustle and fully relax. The walls of this invention are made wicker in the macrame style.
4. Drop chair. The model resembles a hanging house or a nest chair in which a child will be comfortable.
5. Chair on the counter. This method of fastening differs from all others in that the structure does not need to be attached to the ceiling. It can be installed in any corner of the house, apartment or yard.

For the manufacture of hanging chairs, modern synthetic materials are used, which make lightweight design, flexible and silent.

Advantages and disadvantages

TO merits include the following indicators:

• comfort;
• originality;
• exclusivity.

If you buy a chair, then first of all it should be comfortable. His appearance must match the interior of the room in which it will be located. But an exclusive model can only be made with your own hands. Then you will be sure that no one else has such a product.

Such a wonderful swing has flaws:

• the fastening system must be reliable and thought out in advance;
• It is not possible to install a hanging wicker chair in a room with suspended or suspended ceilings.

Gallery: DIY hanging chair (25 photos)

Hanging or on a stand

Considering in detail the types of hanging chairs, you need Special attention pay attention to the structure on a metal stand, which is installed on the floor. This model is considered more functional due to its mobility. The chair can be moved and installed in any place convenient for you.

In this model, you can easily detach the frame from the rack and hang it from the ceiling using a pre-prepared mount. Get a hanging hammock chair.

Placement in the interior

For any interior, you can choose a hanging chair. If we consider classic style, then you need to choose a good rattan model for it, Mediterranean style will complement the white cobweb chair, in rustic style a hanging hammock will look good, and for modern interior a cocoon will do, round form or a plastic egg. IN modern style A chair made of metal rods will fit perfectly into high-tech.

hang ball chair(another name for “bubble”, which means “bubble”) can be done in a room or in a recreation area. The model should be made in the same color and from the same material as the other furniture in this room.

If you want to focus on hanging swing, then you need to choose extraordinary model(for example, with backlight). You need to place it in the middle of the room. It is desirable that the material from which the chair is made is unusual. If you live in an apartment with your significant other, then the second swing can be placed near the bed or in the recreation area.

A ball-shaped chair can be decorated with a pattern to suit your taste. In addition, you can choose the color of the backlight and change it depending on your mood. Green or light green color perfectly relieves stress; red color can energize and lift your spirits.

Armchair for cottage and garden

Outdoor chairs can be combined into separate species. If for a residential premises it can be made from almost any material, then for placement on the street its material must have the following properties:

• resistance to temperature changes;
• density and reliability;
• resistance to natural disasters.

If we consider natural material to make a chair, you need to pay special attention to artificial rattan . Unlike natural material, it better withstands the influence of weather conditions, and therefore will last much longer than natural ones. For the winter, furniture should be removed from the street. To store it, you can use any unheated room or utility room with normal humidity.

Making a chair yourself

Option 1

The chair consists of several rings woven together using macrame. To make such a device yourself, you need to purchase:

The diameter of the recommended rings may be smaller - indicated maximum dimensions for such a chair. As for the thread, it should not be purchased in parts, but at once the entire required length in order to avoid differences in color or quality. If all materials have been purchased, then you can start working.

Progress:

Option 2

If you are not familiar with the technique of weaving macrame, you can make a hammock chair from textiles.

To work, you will need a gymnastic hoop with a diameter of 90-93 cm. You will need dense fabric of a color that not only appeals to you, but will also add a certain zest to the interior of the room. In addition to the hoop, to make a textile product you will need:

• 3 meters of durable and dense fabric of any color, it can be thick cotton or thick denim;
• synthetic padding as a filler for a fabric cover;
• a zipper, the length of which will be equal to the diameter of the hoop;
• 4 buckles and ring fasteners for hanging;
• 3 meters of non-woven fabric or braid;
• 9 meters of belt tape.

Instead of a ready-made gymnastics hoop, you can use a bent metal-plastic pipe.

You need to make two circles with a diameter of 1.5 m from fabric. To do this you need:

• divide the fabric in half;
• Fold each resulting piece into quarters;
• mark a radius of 75 cm from the center and cut off the excess fabric.

On the resulting fabric circles you need to make markings and cut out holes for the slings. You need to work with two circles at the same time to make it symmetrical.

In one circle in the middle you need to insert a zipper, the length of which will correspond to the diameter of the circle. Unfasten the zipper, and stitch the two circles together with right sides facing each other at a distance of 1 cm from the edge.

Turn out the resulting cover and iron it. Cover the hoop tightly with strips of padding polyester, and then with the same fabric as the product itself. This will be more reliable during subsequent use.

Insert the hoop into the case with your hands. Using strong thread, make blind seam around the entire circumference.

You need to hang the finished swing using belt straps. To do this, the workpiece must be divided into 4 equal parts. Thread the ends into cells specially made for slings, tie them in a knot, and melt the edges with fire. This is so that during use the tape does not begin to unravel.

It’s not at all difficult to make or buy a hanging chair for yourself. The main thing is that it matches the interior and fits perfectly into the decor.

It is also important that the product is convenient. To determine this, you just need to sit down or climb into it. Do not hesitate to do this in the store, since the comfort of your rest will depend on the convenience and strength of the swing. By getting a wicker hanging chair, you will say goodbye to stress forever as you will have a cozy place to retreat to.