How to properly hang the TV on the wall, so as not to suffer later and not injure the eyes and neck. Proper mounting of the TV on the wall with your own hands

Dear site visitors, good afternoon!

In this article, we will look at a step-by-step technology, how to hang a tv on the wall. The reason for writing this article was my everyday experience, based on which, when buying a TV in a store, I asked to install it in my home. My surprise knew no bounds when the consultant replied that the cost of mounting a TV on the wall is 3500-4500 thousand rubles. These are the prices for not quite difficult work, so let's start.

1. Drill (in my case, a regular screwdriver).
2. 2 drills for concrete (cost about 50 rubles apiece).
3. Roulette.
4. Building level.
5. Self-tapping screws.
6. A set of construction dowels.
7. Wall bracket (in my case, with the ability to tilt, for more comfortable viewing of TV).
8. A hammer.
9. As well as a wall, a TV and an assistant (an assistant is needed in order to lift and help fix the TV in the grooves).

Step-by-step technology for fixing the TV to the wall

1. The first thing we need to do is to study the instructions. Usually, a piece of paper with instructions for mounting the TV to the wall is present right in the box when buying a wall bracket (by the way, its purchase cost me 2,000 rubles). Let's study it.

   

   Instructions for mounting the TV will help you figure it out

2. The next step is the preparation of preliminary drawings. We need to measure the dimensions of our TV and mark the resulting parameters on the wall.
3. After we measured the dimensions of the TV with a tape measure, we begin to measure the bracket and trace its outline.

   

   

4. The contour is ready. It's time to fix the tilting guides on the TV (they will be used to adjust the tilt level). In order to properly fix the rails, you need to lay the TV on a flat surface. horizontal surface and use bolts to screw the guides to the back of the TV.

   

   

5. The fifth step is fixing the frame to the wall. The frame is fastened in the following way: initially we attach the frame to the wall and with a pencil (in my case ballpoint pen) mark the grooves for drilling holes in the wall. It is important to note that the frame and its location are set using the building level, because. this will allow you to install it without distortions (at right angles).

   

   Find out which one is better to choose, as well as get acquainted with the specifics of the tool, from our new article.

6. At the next stage, the most difficult part comes - this is drilling holes for dowels with self-tapping screws (on which the frame of the building bracket will actually be installed). You can drill with a conventional screwdriver (I did this), but the most handy tool It's definitely a drill. Drilling required special drill on concrete, because it does not blunt and the drilling speed will be much higher.

   

7. So the holes are ready, then we begin to insert the dowels.

   

8. When the dowels are inserted, we begin to screw in the screws. Self-tapping screws are screwed in with a 10 wrench or with the help of pliers (in the people of pliers).

   

9. When the frame is installed, it must be tested. If your TV weighs about 20 kilograms, then the test load that it must withstand wall bracket equals - 60 kg.

   

10. That's all. I hope my detailed technology will help you figure out how to install the TV on the wall.

    

Flat panels that replaced bulky kinescope TVs are technically perfect - a three-dimensional picture of an image with natural shades, excellent sound and maximum functionality. Definitely a plus - aesthetic appeal. Laconic glossy panels will decorate modern interior houses or apartments. How to hang the TV: on the wall with a bracket, on the ceiling, or in a niche? Or maybe hide the equipment in the closet? There are a lot of placement options, ways to disguise or put a technical novelty on public display!

Choosing a TV for different rooms, it is necessary to take into account the conditions in which the technique will have to work, the intensity and duration of daily viewing, and the distance from the installation point to the viewer's eyes.

Mounting a TV on the wall in the kitchen-dining room

Correct choice of height and distance

In spacious living rooms and bedrooms, you can save money by installing LCD panels. Such TVs are able to withstand many hours of viewing without "burning out" of individual sections of the screen, consume less electricity compared to plasma models. The disadvantage is a limited viewing angle without distorting the quality and color reproduction. The advantage is the affordable price. But with a reasonable choice of a place for installation, all the shortcomings are leveled: if you hang the panel in front of the sofa and choose optimal height, then there will be no complaints about the quality of the picture.

Scheme for determining the optimal distance from the screen to the viewing area

It is advisable to install expensive LED panels in rooms where there is no fixed place for viewing. Viewing angle - from 120 o. Image quality does not suffer from an overabundance of light in the room. Energy consumption is at a minimum.

Plasma panels are considered the standard in natural color reproduction. Disadvantages - uneconomical energy consumption, limited service life, strong heating rear surface during operation, heavy weight.

Basic rules for choosing a place to place a TV:

1. The distance from the screen to the eyes should not be less than 2 diagonal centimeters. Comfortable distance - from 2.5 to 4 diagonal sizes.

1. The height of the TV mount on the wall should not be too high. Ideally, if the center of the screen is in line with the eyes of a person sitting opposite the panel.

1. If you cannot comply with the rules of distance and height, choose adjustable mounting for a comfortable viewing experience.

1. Do not install equipment near radiators.

Poor choice of location: the light from the window will interfere with viewing

1. The screen should not be in direct sunlight, opposite the window. The darker in the area where the equipment is located, the better the picture: you do not have to set the maximum brightness.

TV for the kitchen: selection options and installation options

If for the living room and bedroom you only have to choose the technology and the size of the diagonal, then in the kitchen one more option is added to the list of possible options - special panels for embedding. TV options for the kitchen are standard models and moisture and heat resistant panels.

Size: what diagonal is enough for comfortable viewing

The kitchen does not equip a long-term viewing area. You should not calculate the diagonal, focusing on the distance from the sofa. It is enough to choose a point where the panel will be visible to all family members gathered at the table.

Small TV on the wall in the dining area

Practice proves that a sufficient diagonal size for kitchens that are not connected to the living room:

• In compact rooms with an area of ​​​​9 - 12 square meters. m enough TV with a diagonal of up to 20 inches (50 - 51 cm).

For the hostess: suspension over the working area

• For kitchens measuring 12 - 16 square meters. pick up a 25 - 27 inch TV. A diagonal of 71 cm is more than enough.

Large screen TV in the kitchen

• In spacious kitchen-dining rooms, the panel with a diagonal of 81 cm will not seem too bulky.

Built-in models for kitchens: non-standard solutions

Manufacturers offer special models designed specifically for installation in "difficult" kitchen conditions. The housing of the TVs is sealed, with a protective moisture-proof coating. The peculiarity of the panels is installation on any surfaces of the kitchen without restrictions: you can hang appliances above the hob, above the sink or build them into decorative box hoods. The case will protect internal details from overheating.

Special model for installation in the kitchen

If you plan to hide appliances in a closet, instead of hanging the TV on the wall, choose special panels for embedding. Why is it impossible to mount standard equipment in a niche? It's simple - for constant cooling of the case, air flow is necessary.

In a niche on the bracket: the equipment extends when turned on

When installed in a narrow cramped niche, the equipment will overheat when long work and will fail. The case is not guaranteed.

Models for embedding are 50-100% more expensive than standard ones, depending on the type and size of the diagonal. Flush-mounted TVs do not require external cooling. The kit includes a niche and clamps, a frame. The size of the diagonal is limited only by the dimensions of the furniture or drywall construction where the installation is scheduled.

Mounting methods: where to embed and at what height to hang the panel

If you decide to install a classic TV in the kitchen, you will have to choose a safe place:

• At a distance of 50 cm from the source of water - shells.

Near the sink: only special kitchen appliances with waterproof case

• Retreat from gas stove or hob to the side by 60 - 100 mm.

• Ignore the traditional location on the refrigerator: vibration when the compressor is on will not extend the life of the plasma panel.

A rigid jumper is required between the top wall of the refrigerator and the TV

Among those available for self-assembly points:

1. The wall opposite the dining group or seating area.

Corner cabinet with a deep niche: perfect choice

1. Any free corner.

There are several options for placing a built-in TV in the kitchen. The panel can be hidden in one of the upper tier cabinets. With a rigid fixation of the panel, you will have to watch TV with open doors closet.

Panel built into the cabinet door

There is Alternative option for a door that opens to 180 O. When the cabinet is opened, the panel unfolds.

A novelty on the market is a TV built into the factory exhaust duct. At the same time, the issue of the installation site is resolved and there is no need to order decorative masking for exhaust pipe.

Are there free walls? Form a niche for the TV from drywall sheets.

Extraordinary solutions:

• Retractable and swivel built-in panels moving out from under the bottom of the upper tier.

• Hidden inside the island are televisions on a motorized bracket.

Mounting the TV on the bracket: types of mounts

To hang the TV on the wall, select the appropriate bracket. Most of the panels that are on the market are equipped with preparation for mounting the international VESA standard.

Rigid fixation on wall panel

Depending on the size and weight of the panel, select a system with a suitable distance between the centers of the mounting holes. In models with a small diagonal, only 2 holes for mounting-bar can be provided. Most panels have 4 holes in the shape of a square. The standard distance between fixing points is 75, 100, 200, 300, 400 mm. In order not to make a mistake with the choice, you need to find information about the standard in the instructions or simply measure the distance between the holes on the back panel.

Niche mounting

According to the number of planes of rotation, brackets are classified:

• Rigid fixation.

• Inclined.

• Swivel.

Rigid frame mounts

A rigid mount is preferable for large screen TVs. The weight of the panel can be up to 40 kg, and the extra swing arm of the bracket will only increase the load on the fixing points in the wall and back cover.

They also use fixed non-swivel brackets to mount the TV on the wall when there is a long viewing area and there is no need to change the position of the panel.

Advantages:

• Reliability and ease of installation.

• Low cost.

Disadvantage: having made a mistake with the installation site, you will have to remove the frame fixed to the wall and carry out a new installation. The position of the panel cannot be adjusted.

Tilt brackets for flat panels

Inclined or semi-rigid mounting type - bracket with tilt adjustment mechanism. Mounts are distinguished by affordable prices and the possibility of minimal adjustment of the installed position of the panel.

The frame mounted on the wall and the part of the bracket attached to the rear cover are connected by a mechanism with free movement in the vertical plane. The panel hung on the wall can be tilted down. The maximum angle of inclination does not exceed 20 o.

It is preferable to use such mounts for medium-sized panels that are mounted above the eye level of the viewer. Slightly tilting the TV increases the viewing angle.

Swivel brackets for large rooms

Swivel brackets are used to movably fix the TV on the wall, in a niche, on the ceiling.

There are fasteners with a different number rotary mechanisms:

1. Rotation in 2 planes. The TV can be rotated horizontally and tilted or raised vertically.

1. Change of position in 3 planes. In addition to horizontal and vertical position changes, the function of changing the distance from the fixation point is added. These systems are designed to be mounted in niches, where during viewing it is necessary to increase the distance between the wall of the panel and the niche in order to allow air to enter. Brackets are also used to fix equipment in the corners, under the ceiling - at a considerable height.

Mechanical fastening with multi-planar adjustment

1. 4 directions of rotation. In addition to the 3 standard directions of rotation, a rotation around its own axis is added.

Mounting for installation in a niche or under the ceiling

Mechanical fasteners manually adjusted. Complex systems with an electric motor are regulated from the remote control.

Instructions for installing the mount and mounting the TV

Before you hang the TV on the wall, be sure to inspect the back panel and read the instructions. Expensive panels can be protected from non-professional installation. The screws that cover the holes for attaching the bracket can be filled with plastic, and the factory hardware is equipped with a special head shape for which a special tool is designed. You should not install such panels yourself: in the event of a breakdown, free repair under warranty will be denied.

Professional Installation

Important! The need for certified installation must be clearly stated in the installation instructions or in the terms of the warranty.

Tools and preparation: what to buy

Mounting hardware for the back cover of the TV should be included. Use only original factory parts. Additionally, choose silicone or soft rubber pads to protect the plastic from scratches. What for? It's simple: when contacting the service in the event of a breakdown, you can get a refusal to warranty repair if mechanical defects are noticeable on the case: scratches and scuffs.

To hang a TV on the wall, prepare:

1. Perforator or drill. Perforator - for concrete walls, drill - for brick and block partitions.

1. Bracket.

1. Hardware with dowels. Use steel dowels if the wall is porous. Plastic products may not be able to handle the load.

1. Ruler level. In addition to the spirit level, you will need a pencil.

To fix the panel securely, choose screws and dowels of the correct size: for small TVs with a diagonal of up to 25 inches, hardware with a diameter of 4 mm is enough. Wall recess:

• Up to 4 cm in a concrete base.

• Up to 6 cm into a brick wall.

• Up to 10 cm in PGB construction.

For panels with an average screen size (diagonal up to 82 cm), you will have to buy self-tapping screws with a diameter of up to 7 mm. Deepening into the wall (hardware length) - from 80 mm for concrete foundations, up to 100 - 155 mm for brick and block partitions.

Mounting the frame on walls made of different materials

Before starting work, it is worth making sure that after installation there are no hanging wires in the field of view. The issue can be resolved in two ways. Complete with a bracket, it is advisable to buy a box with decorative coating and hanging shelves. Install a tuner, modem on the shelves. Hide the cables in the box.

GKL niche: wires are hidden under the sheets

If the wall is made of drywall sheets, then a cable niche can be made behind it. With a fixed installation, craftsmen install sockets and connectors directly near the bracket attachment point. The disadvantage is that you will have to cut a channel for cables in the wall, and then putty and paint the wall. In addition, this method is not suitable for fixed mounts due to the fact that the distance from the back of the TV to the wall is too close - the socket with the plug simply does not fit.

Marking the wall and choosing a place for sockets

In order not to be mistaken, you should correctly determine the place of attachment. Some manufacturers complete the brackets with special cardboard templates. You can also cut out a paper template yourself by drawing contours on the sheet and marking the centers of the holes.

The main thing is to check the line of the upper fasteners with a level. Horizontal deviation is unacceptable, especially if a non-swivel bracket is mounted.

Drill holes according to the markup. In order not to have to clean up, you can use a special funnel nozzle or a vacuum cleaner that will collect dust from the wall.

When mounted on plasterboard wall it is better not to attach the frame to the sheets. Mounting options:

Special dowel for plasterboard: only for light equipment

• On the crate under the skin.

• In the main wall using long hardware.

The frame is attached to the wall. The part of the bracket that is mounted on back wall, installed separately. Soft pads are placed under the screws, the connections are tightened without excessive force so as not to damage the plastic socket.

Installing the TV and masking the cable

Attaching the bracket part to the back cover

After checking the fastening, you can hang the panel on the frame. TVs with a large diagonal are best attached to the suspension with two people. It is advisable to lay a soft blanket on the floor under the installation site.

Only after the installation is completed, you can connect the cables. First, the connectors and the power cord on the rear panel are fixed.

Important! When installing the TV immediately after purchase, especially during the cold season, postpone the connection for a few hours. Condensation can cause a short circuit.

The excess length of the cords can be rolled up with an incomplete ring and fixed with a clamp. Lay the cables in a special box.

How to choose a TV bracket:

Correct installation inclined mount:

Mounting the TV on the wall step by step:

A rigid frame and a small diagonal are the conditions under which you can start self-assembly. When installing heavy panels, it is worth ordering a professional installation. Masters will advise which bracket to choose and help you find the perfect place to mount. Be sure to check if the bracket can support the weight of the panel: information about the permissible load should be on the packaging.

If you are planning a renovation in the kitchen, consider embedding appliances before ordering furniture. The TV will have to be selected before work begins, so that furniture makers can implement a mount for a specific panel in a suitable place.

Do you remember the old Soviet TVs, which looked more like a bulky box than a miracle of technology? They, as a rule, were installed on special niches or in a sideboard, and there was no question of attaching a TV to the wall. However, modern technology allows you to place flat LCD TVs parallel to the wall, which looks more impressive in the design sense, and takes its place of honor. How to hang the TV on the wall and what is required? More on that below.

A bit of theory

Before practice, let's go through the theory. To hang a 24" LCD panel, you can use standard set for fixation. In this case, special grooves are attached to the TV, which are attached directly to the wall. Main disadvantage this option - the impossibility of adjusting the angle of the panel.

Option two: mounting on brackets. This method is more reliable and can be used for TVs of any size.

Brackets are:

• adjustable (with tilt / turn function)
• fixed (allows you to attach the panel parallel to the wall with an indent of 2-6 cm)

Many are interested in how best to hang the TV on the wall and hide the wires. A cable channel is useful here, and if the wall is plasterboard, then the wiring can be hidden in the holes. A logical question arises: is it possible to hang a TV on a drywall wall? If the TV panel is heavy, it is advisable to attach the hanger to metal frame crates. Lightweight panels can be hung directly on drywall.

How to hang a TV on the wall with your own hands

We will demonstrate how to hang the panel on standard holders.

Almost every home has a TV, and sometimes even several. Most often, we associate it with a pleasant pastime with family or friends. Our eyes are on this electronic device quite often and it does not matter whether it broadcasts television channels or is simply a monitor for watching movies or videos on the Internet.

Let's see how to properly position the TV monitor in the room so that it is as comfortable, safe and convenient as possible for all household members. Read all the points carefully, constantly looking back at your conditions. All the tips here are closely interconnected, and the technical inconsistencies of one of them in the selected room can affect the planning features that already seem to be precisely defined.

1. In which part of the room to place the TV

The location of the TV dictates the arrangement of furniture in the room. First of all, decide from which point in the room (or several) you will watch it. It could be a sofa dinner table, work zone kitchen - but other options are possible.

The way out of this situation can be window blinds or tightly closing curtains with a "blackout" effect.

Consider how much you are willing to close them tightly every time you turn on the TV. For those who have the location exactly like this, we advise you to take a closer look at the curtains on the electric curtain rod, which can be controlled from the remote control or tablet. It is not so expensive, and such an option will add comfort and keep a neat appearance of the curtains themselves, which, due to too frequent mechanical impact, can get dirty faster and lose their original appearance.

1

2. At what height to hang the TV

If you are going to watch TV in the kitchen, say, standing by the stove, stand by an imaginary (if you are still repairing) or an existing one. working surface, and then quickly shift your gaze to the section of the wall where you plan to mount the TV. The place where you looked (it will most likely be the level of your eyes or a little lower / higher) must be remembered and immediately carefully fixed, say, in chalk on the wall. This is supposed to be the center of the monitor.

Exactly according to the same principle, you can determine the height that is comfortable for you to place the TV on the wall in any room where it is supposed to be.

4

3. How to fix the TV on the wall

If, during your layout, the location of the TV involves mounting it on the wall, you must first check technical capability performing this operation. Remember - you cannot hang a heavy monitor on a drywall wall. It will not withstand more than 30-35 kg and runs the risk of simply collapsing.

On a wall made of bricks or blocks, the monitor can be mounted using brackets. At the same time, make sure in advance that there is no wiring in the places where the dowels are supposed to be located.

4

4. Where to hide wires and cables

If your apartment is currently in a state of repair, design in advance and properly prepare the location of the TV and the corresponding outputs for it. What you will definitely need is 3 ordinary outlets behind the monitor and 1 television. In them, you connect the plasma monitor itself, a tuner and / or a Wi-Fi adapter. All these outputs can be safely hidden behind the plasma monitor itself by placing the sockets at a distance of 8-10 cm from the top or bottom edge of the monitor (as it will be more convenient in your situation).

If there is a TV cabinet under the TV, on which other media equipment is supposed to stand, the sockets behind it will not interfere with you either.

If the repair has already been made, all the wires can be hidden in the cable box and carefully lead it to the TV. Later, this box can be designed to match the style of the wall on which it is located - in order to disguise it as much as possible.

In the case where the TV is facing a window and you decide to use the electric curtain rod advice, plan another socket under the ceiling in the place where the curtain will hang (curtain specialists and an electrician will tell you more about this).

With the advent of plasma and LCD TV panels, it became possible to interestingly play with the presence of a TV in the room through wall mounting. Firstly, a flat TV becomes one of the decorations of the wall, especially if this section of it is highlighted with a color or texture. Secondly, wall-mounting a TV allows you to disguise the presence of modern technology in classic or retro interior- Flat TV looks like a painting. To enhance this effect, designers frame the TV with a frame - this can be wooden frame or a frame made of polyurethane moldings. This, of course, is already a hackneyed technique, but very effective. You can keep the theme of frames and place on the sides of the TV pots, sconces or wall clocks in the same frames, but smaller. Plasma and LCD TVs lighten space, but they are not light at all, especially when it comes to a large screen TV. That means hanging flat tv wall much more difficult than the same picture or mirror.

Mounting a TV on the wall: basic rules from TV manufacturers

Two people are strongly recommended to wall mount a TV weighing more than 25 kg. TV manufacturers in the operating instructions constantly remind that only a qualified technician should hang up the TV (this applies to both plasma and LCD), since an illiterate TV wall mounting can be dangerous. But if you have the skills to work with a drill and have golden hands, you should not be afraid of self-assembly, unless, of course, we are talking about a very heavy TV. Before hanging a flat screen TV on the wall, you need to make sure that it can support its weight. Cable connections are made after the TV is hung on the wall. Do not install the TV in a closed space - the air must circulate freely through the ventilation holes of the TV. When hanging the TV on a movable arm, you need to make sure that when you turn the TV, the power cord will not be pulled, otherwise sparks and fire may occur.

How to hang a TV on the wall

Place for TV on the wall . First of all, you need to decide on the location of the TV. We will talk about height and distance separately, but now I would like to pay attention to the fifth rule from TV manufacturers: “You can’t install a TV in a closed space - air must circulate freely through the ventilation holes of the TV.” Tight TV niches are not suitable.

You can often see flat-panel TVs mounted in niches - wall or furniture. This is fraught with a quick failure of the TV due to constant overheating. LCD TVs are more tolerant of shortcomings natural ventilation, but plasma panels emit much more heat.

Thus, lcd tv wall mount in a niche is permissible, but the niche must be free - at least 20 cm of free space must remain above and below the panel. It is also desirable to leave gaps on the sides of the TV. In any case, before mounting a niche, you need to carefully read the instruction manual that comes with the TV. If you really want to mount a TV in a tight niche, buy special built-in LCD panels.

Of great importance is the quality of the wall itself. A thin drywall wall may not support the weight of a large TV. In particular, experts do not recommend hanging a TV weighing more than 30-35 kg on a weak plasterboard wall. When mounting the bracket on such a wall, you need to use special dowels. If the TV is heavier than 30-35 kg, you should once again think about the advisability of mounting it on the wall, and if the decision is made, you can strengthen the TV wall by hemming it with a thick plywood sheet.

But what if you really want to hang the TV on the wall, but repairs are not planned in the near future, and the plasterboard walls do not inspire confidence? It will be easier to build a small drywall ledge with a reinforced wall. This is, of course, a relatively dirty job, but fast enough. In addition, you do not have to break existing walls.

Brackets for hanging TVs. Mounting TVs on the wall is carried out on hinged brackets. Brackets are sold in the same stores as TVs. If you plan to hang it on the wall, buy a bracket right away with the TV.

Brackets are different: they differ in the type of TVs installed on them (plasma or LCD) and in the weight of the equipment. The heavier the TV, the more durable the bracket needs to be. As a rule, the accompanying documents for the brackets indicate the type of equipment, the diagonal of the TV, and its weight. Be sure to follow this information! And, of course, consult with the seller. Most likely, in the store where you will buy a TV, you will find the best suitable bracket.

Brackets also differ in the degree of mobility: there are hard-lock (fixed) brackets, tilt/swivel brackets with only vertical or horizontal adjustments, and brackets with multiple tilt and swivel options. It must be borne in mind that movable brackets are usually designed for small TVs. Brackets for heavy TV panels are usually fixed, but more reliable.

It would seem that it is difficult to choose a place for a TV? And it turns out that this is a whole science. Figuratively speaking, in order to determine the height of the TV, you will have to solve the equation based on a number of indicators:

• furniture height;
• room area;
• device dimensions;
• the growth of the viewer and his dislocation while watching programs.

At what height to hang the TV in different rooms

Increasingly, families are coming to the conclusion that having one TV is not enough. Someone cannot share the "blue screen" because of different preferences, and someone wants to be able to watch their favorite programs in any room without being distracted from business. Therefore, at what distance from the floor to hang the TV depends on the specifics of the room.

In the living room

The living room is a place where the family spends time together for heartfelt conversations and, of course, watching TV shows. Therefore, it is important that everyone is comfortable. An experiment to determine the optimal height for mounting a TV on a wall should be carried out by a family member with an average height.

1. Sit on the couch and assume a comfortable position, imagining that you are watching TV.
2. Close your eyes and relax.
3. After five to ten minutes, open your eyes and look at the wall where the screen is supposed to be.
4. The point at which the eye fell, mark with a pencil.
5. The same algorithm must be done, sequentially occupying all " seats» in the living room (armchairs, chairs, etc.).
6. Connect the set of dots to get something like geometric figure, and find its center.
7. The center point must be in the center of the screen.

As practice shows, the central point of the screen in the living room rises 70-175 cm from the floor. The most common indicator is 150 cm.

In the bedroom

The bedroom is a place to relax. Doctors are categorically against the presence of a TV in front of the bed. But if you like to watch late-night sports or movies before bed, it's important to properly hang your TV on the wall. Define optimal location a technique similar to the previous one will help. The only difference is that you will be lying down, taking a comfortable position on the bed, to determine the point of the future center of the screen.

The installation height of the TV in the children's room should be at least 150 cm. This is necessary in order to limit the baby's access to the device.

In the kitchen

Every housewife has her own source of inspiration in the kitchen. Someone likes to cook in silence, someone likes to listen to music, and someone prefers to accompany cooking with watching TV shows or shows. In any case, attention is focused precisely on working with products, and the hostesses only glance at the screen. Therefore, there are no strict requirements for the height of the installation.

As a rule, the kitchens in the apartments are small, and therefore the place for the TV is allocated according to the residual principle. Usually the technique is set quite high, which causes the image to darken. The problem can be solved by a movable bracket that allows you to install the screen at an angle.

When choosing a place for a TV in the kitchen, make sure that it is located away from the stove, microwave oven and other appliances that emit heat, as well as water sources. Such a neighborhood significantly reduces its service life.

Safe distance

The perception of the picture, as well as visual sensations, depend not only on a comfortable height, but also on the distance from the screen. Sometimes, when choosing a modern widescreen TV, buyers do not take into account that the size of the room does not allow maintaining the optimal distance from the viewer to the TV. What parameters to focus on, the table will tell.

Table - Dependence of the viewing distance on the diagonal of the screen

If the screen big size will be too close to the viewer, vision will not be able to cover the entire picture, and pixels will also be noticeable. In addition, it is fraught with eye strain and drying of the mucous membrane.

There are many subtleties on how best to hang a TV without harm to health. When choosing a screen location, it is important to consider seven recommendations.

1. wall features. It is not always possible to install a TV in a suspended state. For example, a wall made of drywall sheets will not support the weight of a massive plasma panel.
2. Windows and lighting sources. This will cause glare. If it is impossible to allocate a better place for the screen, take care of blackout curtains.
3. additional manipulations. When determining the height of the TV, keep in mind that you must have direct access to the device for troubleshooting, connecting cables or flash cards.
4. Precautionary measures. Having determined the optimal mounting point for the bracket, you should make sure that there is no electrical wiring. This can be done using a special detector (electrostatic, electromagnetic or combined).
5. Restrictions. TVs should not be placed near heating appliances, as well as in tight niches. There must be at least 20 cm of free space on each side.
6. Personal comfort. While watching TV for a long time, you should not tilt or lower your head. This is too much stress on the cervical vertebrae.
7. Mobility. You can watch TV in the bedroom both lying down and sitting. Respectively, comfortable height TV on the wall for the view is changing. Therefore, you will need an adjustable bracket that will allow you to change the position of the screen.

During installation, it is important to pay attention not only to comfort, but also to safety. It is necessary to hide the wires as much as possible to limit access to them by children and pets.

Does it matter how high you hang your TV? Definitely. The viewer's gaze should be directed directly to the center of the screen or to its upper third. This will ensure high-quality perception of the picture and minimize the strain on the neck. It is difficult to determine the optimal position if you are a mobile person, or family members different height. In this case, be guided by the experience of physicians, who consider 135 cm the optimal height from the floor to the center of the screen.

After the repair in the bedroom, many also update the equipment in this room. After purchasing a TV, many do not know at what height to hang it. After all, not only ease of viewing, but also safety will depend on its correct location.

Location

Before you decide at what height to hang the TV in the bedroom, you first need to decide on the place where exactly it will be located. He right choice The place will depend on the comfort of viewing, and the height at which the device itself will hang.

To determine the location, you need to lie on the sofa or bed in the bedroom in a comfortable and familiar position for you. Now you need to determine which wall the TV should be mounted on so that it is as convenient and comfortable to watch as possible.

Experienced Specialists say that the optimal location is considered to be a point drawn in a straight line from the center of the bed to the wall, and the height of this point will be adjusted later. It is with this arrangement that the TV will be clearly visible to all people who are located in the bedroom, and there will be no inconvenience when viewing it.

If the device will be hung in a single bedroom or nursery, it must be placed on diagonal line from the center of the bed. In this case, even when turning, there will be no discomfort during viewing, and the screen will be clearly visible from any position.

When the potential installation location of the TV has already been selected, you can directly proceed to the calculation of the height at which it will need to be fixed.

Height

You can choose the optimal height for the TV on the wall in one of two ways. The first is based on the usual ease of viewing it, and the second is based on medical advice and manufacturer's advice.

• Determine the height level where the bracket mounts will be located, if lie down in your favorite position on the bed, close your eyes for a second, and then sharply open them and immediately look at the wall. The point at which your gaze rests will be the middle of the television screen. So, this is where the main bracket will be located. When choosing this option, it should be understood that parameters such as the distance from the bed to the wall and the dimensions of the screen diagonal are not taken into account here. So, by choosing this method, you cannot be sure of the safety and comfort of your eyes when watching a TV hung in this way.
• The second method is based on mathematical calculations and the advice of doctors. Optimal distance between the eyes and a device with a liquid crystal screen, its diagonal multiplied by three is considered, and for plasma screens this is the product of the diagonal and the number 4.

New TVs with an LED or 3D panel can have absolutely any screen diagonal size, but a different extension, for example, 720 or 1080 units. The mounting height of such TVs is calculated using a special formula:

1. For TVs with screen extension 720 units, the mounting height is equal to the product of the diagonal of the screen by a factor of 2.3.
2. For TVs with extension 1080 units, this value is equal to the product of the diagonal by a factor of 1.6.

But when choosing a height, it is also necessary to take into account the distance from the bed and directly from the eye to the screen of the device.

Optimal distance

Many ophthalmologists say that the minimum distance from the eyes to the TV cannot be less than its diagonal multiplied by two. Such a recommendation is fully justified, but it does not take into account the type of screen of this device and its resolution. Therefore, this method of calculating the distance from the eyes to the screen is applicable only to older models.

The distance from the eyes to the LCD TV should be no less than the sum of its two diagonals, and from the plasma monitor to the eyes - no less than the product of its diagonal and the number 3.

In order to watch the TV attached to the wall not only conveniently, but also safely, it is recommended to follow the following tips during its installation:

1. Max deflection angle from the TV screen when viewing should not exceed 30 degrees.
2. Minimum height from floor for TV installation cannot be less than 1 meter. Otherwise, there is a risk that the TV may be accidentally caught and fall.
3. It is best to place sockets at a distance no more than 45 cm from the central bracket.
4. It is very important to consider the height of the furniture, over which the gadget will be located. Minimum distance from the chest of drawers or sofa armrests to it - 25 cm.
5. If possible, it is better to install an adjustable bracket. This will allow, if necessary, to change the angle of the TV, depending on the position on the bed and the number of people who will watch it.
6. If the TV is installed in the children's bedroom, then it is better not to be limited to only one bracket. It is best to purchase a special wall-mounted TV stand. In general, the height for its installation is selected by any of the methods described above.
7. When buying a bracket, make sure that it can support the weight of your TV. It is best to purchase brackets specifically designed for your TV model.
8. It is recommended to check periodically how securely the TV is fixed.

Finally, I would like to point out again that correct height on which the TV should be mounted in the bedroom should be selected in accordance with all the above parameters, that is, the height of the furniture, the size of the room, the distance from the screen to the eyes. Only in this case it is possible to choose the correct and safe height for its fastening.

Having learned from this article at what height the TV should be located, we proceed to the installation of the TV bracket. See the video for more details.

At the time of buying modern TV the owner must know how to hang the TV on the wall correctly, conveniently and safely. Flat LCD or LED screen can both highlight modern design apartments, and completely spoil it. To avoid damage and additional costs, the location of the TV is planned at the stage of the design project or before the repair, when the electrician lays the wiring.

How to prepare for TV installation

There is no universal place where to mount the screen on the wall. A plasma or LCD TV is placed depending on the wishes of the owner of the apartment and the features of the interior. There are no restrictions on the material of the walls where the screen will be fixed, it can be a plasterboard or foam concrete partition, a brick wall.

To figure out how to mount a TV on a wall, take into account a number of important factors:

1. Specifications.
   You can correctly fix the monitor on the wall, knowing its dimensions and weight. Such data are indicated on the packaging or in the operating instructions for the device. If the weight of the product is more than 25 kg, install the screen with two people to avoid injury and fall of the equipment.
2. wall material.
   The surface can be concrete, brick, wood or drywall. Depending on the type of wall, mounting tools, holders and fittings are selected.
3. Wiring diagram.
   You need to mount the TV where the installation will not cause damage to the wiring. Correct location TV will be able to hide the wires, and the equipment will look good and neat.

Only after familiarizing yourself with these characteristics in detail, determine the method of mounting the TV on the wall. It should exclude damage to electrical wiring, violation of the structure of the walls, the fall of the screen due to improper fastening.

What types of fasteners exist

Having determined the main technical parameters, proceed to the installation of equipment. It is possible in two ways:

• without bracket. An easy way for those who want to securely and quickly mount the screen on the wall. How to hang a TV without a bracket? The TV panel is mounted directly on the wall or on an aluminum profile. The disadvantage is that the fixed equipment cannot be tilted and rotated;
• with bracket. For those who appreciate the comfort and convenience of watching TV. The choice of mounting bracket depends on the size and model of the TV. Can be selected as fixed, swivel or tilt/swivel system. The bracket allows you to change the angle or tilt of the screen, which helps to avoid glare and make viewing more comfortable.

If a Samsung or any other large-screen TV was purchased, it is recommended to mount it on a fixed bracket for maximum TV stability. For models with a small diagonal, it is recommended to use a movable bracket.

How to install a TV on the wall

Mounting the TV screen on the wall is convenient both in the living room and bedroom, and in the kitchen. Placing the monitor on the wall provides it with maximum level stability, since the TV panel is fixed not on a movable structure, but “tightly”.

TV screen manufacturers have taken care of the ease of installation by making special holes on the back of the panel, through which you can hang the monitor on the wall. This makes the task easier and makes the whole process no more difficult than hanging a picture. It should be noted that the greater the mass of the screen, the more powerful the fasteners will be required. Incorrect fittings can cause the TV panel to fall.

Installation consists in drilling the wall, installing fasteners in the holes and hanging the TV itself. It is important to study the electrical wiring so as not to damage it when drilling holes. It is better to involve a qualified electrician for this.

Installing a TV on a wall without a bracket (video instruction)

Curved monitor designed for corner mounting, it is recommended to mount it on a wall or on a fixed bracket.

How to hang a TV on a bracket

In order to install a plasma or LCD screen safely and quickly, it is recommended to adhere to following algorithm actions:

1. Marking is done for future holes drilled in the wall. You will need to measure the distance of the bracket holes from the bottom to the top edge designs. The height at which the equipment will be attached is measured from the floor covering. At this level, the lower holes will be located. A level is applied, carried out horizontal line. This step is important, as the TV should hang as straight as possible.
   
   
2. The wall part of the bracket is applied so that the marked line runs at the level of the lower holes.
3. Points are drawn in the holes of the bracket - these are the places of drilling.
4. A special device checks the wall for the presence of hidden electrical wiring.
5. After making sure of safety, drilling is carried out according to previously made marks.
   
   
6. Dowels are driven into the holes obtained with a hammer.
7. The bracket is applied to the wall, bolts (sometimes self-tapping screws) are screwed into the previously mounted dowels.
   
   
8. After making sure that the bracket is securely screwed, you can start hanging the screen on it.