Description of the installation. The main types of installations for hanging toilets

Unlike foreign dwellings, domestic bathrooms and toilets appeared not so long ago. Such a plumbing innovation saves usable space in the room, as well as time for its cleaning. Do you know what an installation is? In our review, we will consider this design, as well as find out the reasons for its popularity in modern interiors. We will learn more about the advantages and disadvantages of installation, as well as methods for choosing the right model for your interior.

Read in the article

Toilet installation: what is it, varieties

There are many advantages why it is worth buying wall-hung toilet models with installation. They allow you to facilitate cleaning, so they are not installed on the floor and dust and dirt do not accumulate in the fasteners. In this case, the toilet is fixed on a special device, which is called the installation. It is a strong frame that can withstand the weight of plumbing. In addition, it allows you to mask the water mains.

At the same time, the hanging toilet bowl is located in the installation itself and is covered with a decorated plasterboard box. The flush design is located behind a special window with a button. It is removed during maintenance and repair of the flushing mechanism. With enough space, the structure can be removed for decorative wall or bezel.

The floor-mounted toilet bowl with installation looks good and fits perfectly into any interior. But most often such devices are purchased for suspended plumbing equipment.

The tank is made of polymer, it is usually covered with tiles or other options exterior finish. In order not to have to knock down the entire finish during the repair, it is important to choose high-quality equipment. When choosing an installation kit and a toilet, you need to understand the types of design:

• block installations also called attachments. They are fixed to the main wall. In this case, the wall must be load-bearing;

• frame can be mounted both to the wall and to the floor. They do not require a solid wall, as the frame is quite massive. The frame structure can be mounted even on the wall. It stands on its own, although it is built into .

You can choose a corner installation for a wall-hung toilet or any other. In a complete set, in addition to the installation, there is a hydraulic piping of sanitary equipment, connecting parts and a tank. Rubber or silicone is used for laying the flush valve. There is a special emergency drain that protects the room from overflowing water and flooding.

There are various myths about the installation of a suspended type, that you can see what is not true in this video:

In addition to hanging models, installations are suitable for floor types of plumbing. Most often, the designs are made of porcelain and faience, but there are also products made of metal, glass or acrylic. Lids can be both conventional and with a semi-lift. The latter option ensures normal closing and protects against mechanical damage. The flush button comes with a stop flush mode. In this case, flushing is stopped by pressing the pedal again. There are also two methods of flushing: economical draining of half the container and full flushing. Non-contact options are powered by infrared radiation. Panels may vary in color palette.

Note! Many are afraid that the toilet may fall with a lot of weight. But such models are able to withstand weight up to 300 - 400 kg.

Why is it better to choose a toilet installation: pros and cons

When deciding which toilet is better to buy, you need to understand the advantages of a suspended structure compared to conventional plumbing:

• compact dimensions, since this option does not take up as much space as conventional plumbing. This is especially important when the bathroom is small;
• high quality fittings, as the nodes are masked into the wall. Manufacturers pay great attention to float and keyboard parts;
• water is saved when compared with conventional tanks, since the pressure is more powerful and there is less fluid flow;
• it is possible to mount in hollow walls. In this case, a metal frame is used;
• you can choose any place for installation;
• produces less noise when flushing water than conventional designs. Tanks are equipped with additional layers of foam, which have excellent;
• is easy to clean, as the area under the device is accessible.

Determining what is better installation or a conventional toilet, it is necessary to study the disadvantages of the equipment:

• have a higher price than standard products;
• if replacement of equipment is required, then a thorough repair will have to be done;
• the installation procedure will be more complicated than in conventional bathrooms.

They will help you choose a high-quality model of a wall-mounted toilet bowl with installation reviews from different consumers.

Also, how to choose a wall-mounted toilet will tell you the analysis of important characteristics:

• practical materials include faience and porcelain. The latter option is characterized by a smoother surface. Faience glazed bowls cost less than porcelain bowls, but are not inferior to them in quality. Stainless steel bowls are not as popular, as are polymer concrete and glass bowls, which are notable for their little practicality;

• the dimensions of the structure can be small, while the toilet bowl will have a length of up to 54 cm, medium dimensions - up to 60 cm, and the most convenient option up to 70 cm;
• the shape and design of the toilet bowl is selected taking into account the overall design of the bathroom. It is important to take into account the color palette, which will successfully fit into the interior of the room. The shape of the bowl can be square, round and oval. Rounded options are easy to wash compared to irregularly shaped products;
• flush types. Flushing can be direct (horizontal) or reverse (circular). With a horizontal version, water is supplied from the back of the bowl and washes it from all sides. With a circular motion is performed in a spiral. The double flush system is considered more economical;
• some models have great functionality, such as the presence of cleaning systems, heated seats or a coating of dirt-repellent glaze. Convenient solution is a seat with a micro-lift mechanism.

There are many factors to consider when deciding which toilets are the most reliable.

Note! Choose a toilet that has a gentle slope towards the exit. It is also worth considering that rimless designs are easier to wash.

Dimensions of the toilet bowl for installation: dimensions of the model ranges

When choosing a product, it is necessary to take into account the dimensions of the toilet installation. This is of particular importance if it is planned to be installed in a specific location. Consider the main dimensions:

• the dimensions of a standard-type hanging toilet bowl have the following parameters: depth 10-15 cm, width - 50 cm, height - 1 meter;

• the frame structure is characterized by the following parameters: depth - 15 - 30 cm, height - 0.8-1.4 m, and width - 50-60 cm.

When choosing the size of the installation for a wall-hung toilet, it is better to choose low models - up to 82 cm. Wide and small products are suitable for rooms with wooden partitions.

Many manufacturers offer non-standard dimensions of the toilet bowl with installation. For example, Tece produces models with a depth of 8 cm. Miniature designs with a width of 30 cm are offered by the company Migliore.Also, the length of the toilet with installation may differ from different manufacturers.

Which version of the wall-hung toilet with installation is better to choose: recommendations for the right choice

Now let's decide how to choose an installation for a wall-hung toilet. It is important to take into account the following points:

• where the structure will be installed;
• a recess is made in the wall in advance, and the finished structure can also be sewn up;
• do you need a hanging mechanism or just need to disguise the tank;
• selection of additional material for supplying communications;
• key material.

When deciding which installation for the toilet is better, you need to consider that in addition to the frame and block type, there are other varieties. For example, designs differ in the method of fastening:

• wall-mounted is used most often. In this case, the installation is carried out to the wall using bolts and studs. Pressure is applied to the partition;
• floor applies when . In this case, the support is directed to the floor, and the lower part of the structure is reinforced.

When choosing a toilet for installation, the place of installation also matters. The corner version has a triangular-shaped frame, which allows you to mask all the details. Suitable for narrow spaces. The double-sided version is characterized by the location of the bathroom on one side, and on the other. There is also a product in line, when several devices are located on one wall. In this case, different types of plumbing can be used. You can also use a low version with a height limit. In this case, individual elements are placed under the window.

It is important to choose the right drain system. A forced stop is performed when the button is pressed again. The double key allows you to provide different options for water pressure. Also, when choosing a hanging toilet, you can stop at sensory models. They are triggered by hand movement.

When purchasing even the best hanging toilets, pay attention to the complete set of the headset in the store. Installations can be sold as a set with a bowl, or separately. It is better to purchase a complete set, since in this case all sizes will match. Along with the frame, there must be fasteners for suspension and fittings for mounting pipes. Some kits have a button and a tank for draining as standard. Economical option offers two modes. With a large supply, 7-9 liters enter, and with a small supply, 4 liters.

If the bowl is available, then you need to check the dimensions of the frame structure, as well as the gaps between the fasteners. It is important that the bowl can be adjusted in height. It is also worth paying attention to the type of painting. An excellent solution is powder coating to form a rigid film. The frame device is made of thick metal. When choosing the best toilet installations, pay attention to the strength of the welds and paintwork.

You can see the installation option of the structure in the video:

Note! Many manufacturers provide a guarantee for their product, so when buying, check for documents confirming this.

Toilet installation manufacturers: rating of popular models with prices

Let's figure out which company is better to choose a hanging toilet? The most popular brands are from Italy and Germany. But their products also have a significant cost. Products from Bulgaria and the Czech Republic are famous for their good quality, but they are presented in the middle price category. Cheap designs include products from China.

As many user reviews confirm, Geberit products with useful functions are of good quality. For example, they have a mechanism to eliminate unpleasant odors.

The rating of manufacturers will help determine the choice of a suitable design. The toilet installation may not work properly if it is installed incorrectly. This factor should also be considered when buying.

Characteristics of the Geberit toilet installation

Installation Geberit with a toilet in the kit refers to reliable plumbing equipment. Models of this Swiss company have the following advantages:

• possibility of installation in difficult conditions. The frame and long studs of 50 cm can be used for close placement of pipes;
• high level of quality, allows consumers to count on a guarantee of 10 years;
• not complex installation, since the product is mounted easier than similar designs;
• there is an opportunity to purchase spare parts and make repairs.

It is worth noting the following disadvantages:

• high price, which may increase depending on availability design solutions and additional options
• there are no fasteners included.

Feedback model Geberit Duofix, Ivanov Victor, 45 years old, Saratov:“Comfortable and high quality installation. I like that it comes with a great warranty. The hanging toilet is not difficult to clean, you can simply walk under it wet rag. I also like that all the mechanisms are hidden from view. The design is held on a metal frame. There is access to the tank, which is covered with a decorative lid.

Wisa installation features: reviews

The Dutch brand Wisa toilet installation has been creating the highest quality sanitary ware for many years. This manufacturer is constantly working to improve the functionality of the equipment. Experienced engineers are engaged in the development of new models.

Consider the main advantages of products:

• the perfect combination of modern technology, design and quality;
• functionality of models;
• reliability and durability of equipment;
• silent drain system;
• special button for equipment

There are also various accessories in the package: flush keys, cisterns and diggers.

Review, Elena, 38 years old, Volzhsk:"We have small bathroom, so they immediately looked for the product small size. We also wanted to remove the ugly pipes. We chose a model with a frame width of 38 cm. Such a device has many advantages. First of all, great for a small room and looks great. Reliable fastening and the whole structure, no need to be afraid that the product will collapse. I like the micro-lift seat. The only thing that is frustrating is that there will be problems with the repair if something breaks.

How to choose a Cersanit toilet installation

Polish Cersanit installations are in demand among consumers. Reviews characterize them as high quality and comfortable. The advantage of the design is not only low prices, but also the following parameters:

• complete set with toilet bowl and fasteners;
• long operating periods.

It is also worth noting the negative points:

• fasteners are short, which does not allow them to be mounted in some rooms;
• there may be problems with spare parts.

Feedback, Alekseev Ilya, 51 years old, Khabarovsk:“The range of prices in the store was very striking. You can buy expensive models for more than 50 thousand or purchase a Cersanit Delfi installation at a much lower cost. A year ago we purchased this sanitary ware, and although it is not so popular, we are satisfied with our purchase. The hardware is white and the button is chromed. A special filter is placed at the entrance to the system.

Characteristics of the Grohe wall-hung toilet with installation

Grohe's installation is distinguished by high quality components. Reviews say that such equipment is suitable for both professional craftsmen and amateurs.

Here are the characteristics of the models of the German company:

• excellent workmanship. The frame is made of metal coated with a corrosive layer. Welded seams are executed in perfect quality;
• no hassle with installation. Attached detailed briefing and fasteners;
• light weight for easy installation;
• mounted anywhere in the room;
• the drain tank has a silent dialing mechanism;
• warranty period is approximately 5 years.

There are also certain disadvantages:

• the toilet will have to be purchased separately;
• there are fakes.

Review, Alena, 29 years old, Bataysk:“We bought a Grohe Rapid SL 5 design with my family. A reliable product and very high quality. The downside is the lack of a hanging toilet. Satisfied with the quality. Since the products of this company are being counterfeited with might and main, I can advise you to pay attention to the price, quality, and also to the packaging.”

Mepa installation features: consumer reviews

You can find the Mepa product in the ranking of wall-hung toilets. Products are made in Germany. It features a high quality galvanized coating that is resistant to high temperatures. The designs are of high quality and have proven themselves excellently over 50 years of production.

The installation is mounted in a main wall, there are also models for installation in a plasterboard partition. There are stop-start and single flush modes. Water is connected through a special service window. A shut-off valve is installed at the factory during pre-installation. The dual flush is done by hand and the keys are mounted from the front.

The table shows the most popular rating models.

A photo	Models	Characteristics
	Geberit Duofix	Installation of a wall-hung toilet bowl with frontal control. Available flush tank with a capacity of 6/7.5 liters. Installed in front of a main wall or partition. Can be paneled. The height of the part is 112 cm. There are water inlets from above or behind. The flush volume can be adjusted. Does not require the use of special equipment during installation.
Geberit Duofix installation
	Wisa XS WC front basic	The design has a frame made of steel profile. The legs can be fixed in 4 positions. One-piece cistern made of plastic, dual-flush available. The set includes fasteners and soundproofing parts.
Wisa XS WC front basic
	Cersanit Delfi	Wall construction. Microlift available. The installation of the tank is hidden. Includes toilet, installation and panel.
	Grohe Rapid SL for wall-mounted toilet	The set includes fittings, a tank and a supporting frame. The kit includes all the necessary fasteners. It can be mounted both in a partition and in a capital base.
Grohe Rapid SL installation
	Measure 514306	The design is of high quality materials used. Fully assembled at the factory. The set includes feet for floor mounting. The frame is made from 2mm galvanized steel.
Installation Measure 514306
	Tece Lux	The package includes a flush tank, a set of fasteners, installation instructions, a set of nozzles.

How to install a hanging toilet with installation: installation features

Consider installing a toilet installation. Installation is carried out after the floor is leveled. When choosing a block structure, it is necessary to align the walls. In this case, installation is carried out only on solid supporting structures. It is important to determine the place of installation of the product. Depending on the type, the installation can be attached to the wall or floor. Sewer pipes and water are led to the installation site. Branch pipes are attached near the selected place.

First, we fix the frame to the floor and mount it to the place of its installation. In this case, you need to check the verticality and horizontality. Then the marker makes marks at the attachment points. When installing, special dowels are used. Then the frame is placed in the right place and fixed.
Many designs have an adjustable height feature. If there is no coating, then the thickness is added to the desired height. The legs are adjustable and fastened with clamping bolts.
Wall mounting requires special adjustable bolts. One end they are attached to the corners of the frame, and the other to the wall. The design is installed in a vertical position.
Then the branch pipe on the frame is connected to the sewer outlet. If a plastic clamp is installed on the frame, then it is installed sewer pipe. Water is connected to the pipe on the tank. The eyeliner is carried out by any pipe. The adapter with the tank is connected with a flexible hose.
After finishing, the box for the button is done. After that, the edges should be flush with the tiles. The cut off cover will have two holes for the bolts, and the drain button will be attached to them. Then a hose or cable is connected to the button. This part is bolted. Installation begins with the installation of the gasket. The pipes are attached to the toilet and the structure is hung on studs. They are covered with rubber pads. For better sealing, the joints must be coated with silicone.

• in case of leakage of the floor toilet, it is necessary to check the tightness of the joints. The connection with the corrugation is re-processed;
• to simplify repair work a technological hole is made above the button;
• if the toilet is unstable, then this can be corrected by tightening the bolts;

Installation is an art form in which various parts, for example, natural elements, household and industrial products, textual information and other materials, the creator creates a spatial composition. Such a composition is a non-standard combination of ordinary things and often carries some social, rebellious or other symbolic meaning.

The pioneers of installation art are the Dadaist Marcel Duchamp and the Surrealists. The word "installation" itself comes from the English "to install", which means "install" or "installation", which means installation, installation. We advise you to read -.

This, in essence, describes the process of creating an installation, which is precisely composed of a set of individual elements, mounted, and not drawn or written.

By creating installations, the artists aim to draw the viewer's attention to other facets of everyday things, to force them to find a new meaning in the most familiar, for example, in a fork or a doorknob.

And, looking at an ordinary thing from a different angle, the viewer will discover the message of the artist, the message, with that important information, which he longs to convey to people: it may be an attempt to draw attention to an urgent world problem, social needs, tragic events ...

The attitude to this genre of art in the world is ambiguous, and often even contradictory. Other installations simply cannot be characterized as a work of art and, at best, they cause bewilderment, at worst, disgust. It is not always possible for people to discover for themselves the message that the artist put into the creation. But, in fairness, it must be said that not every artist leaves this message, some simply try to attract attention to themselves in such a non-standard outrageous way.

Separate installations are really interesting and noteworthy. Such works are able to evoke a whole storm of emotions, leave an indelible enthusiastic impression on the viewer, make them see things as they did not imagine them before.

This effect is also achieved due to the fact that the installation is a three-dimensional object, more familiar to the human eye than the two-dimensional space of the picture. The installation has more materiality, because it has a large set of means of influencing the feelings and emotions of a person.

What is the essence of the installation? Everything is quite simple - you need to find the hidden meaning of each element, each thing. The installation is designed to demonstrate to a person how many-sided objects that surround him, how many hidden features they have, how many unexpected facets are hidden in them.

Installation devotees are able to find art in everything, because installation is not just something flashy, provocative and attracts attention in all ways. A feature of this art is the ability to show that any object in the world is beautiful and unique in its own way, every thing ever created has a special meaning.

The installation principle is a constant search for the essence of things and the symbols hidden in them. This art invites the creator and the viewer to become these things, penetrate them, live their life, understand them from the inside, hear their thoughts, understand their character and essence.

This opens up another feature of this genre - each person finds his own meaning in a single thing. For each individual, the installations will have their own symbolism. This makes the creations unique in their own way.

Through the shape of an object, its color, volume, texture, you can plunge into its essence. Using ordinary materials, installers give them a new color or new form, place accents and thereby try to give the subject the necessary meaning, which the viewer must find and understand.

Nowadays, the installation has a variety of forms. The most popular is sculpture. Individual installations are selected very close to the sculpture, but, unlike the latter, they are not sculpted, but mounted from various materials of industrial or natural origin.

Surrealists are considered the founders of the installation, the most famous of which is, of course, Salvador Dali. His installations were distinguished by magnificence, outrageousness and made an unforgettable impression. To this day, the master's work is an inexhaustible source of inspiration for a great many installers around the world.

Installations are created from everything in the world: from plasticine, TVs, wood vines, boulders. You can also find installations with antique details. Here, the material is not so much important as the flight of thought, associativity and richness of the creator's imagination.

Not so long ago, for example, the work of Tracey Emin, an English artist, was sold at Christie's auction. Her creation is an untidy spread out bed, around which rubbish and rubbish are scattered. And in the northern capital of Russia, the city of St. Petersburg, on Hare Island, an installation by sculptor Florentin Hoffman is presented - a huge hare resting on the grass.

Many modern installations can be characterized as harmonious and aesthetic, not all creations of this genre are defiant.

With the development of modern technologies, such a type of installation as a video installation or video art has appeared, which also occupies its own niche in contemporary art. The installation successfully fits into the classical architecture. And it received the most complete expression in the directions of minimalism and postmodernism, which are so successfully combined with the essence of the genre.

Installation art can be compared to pizza: everything that is at hand is suitable for it, but it does not require without fail cheese and tomatoes, she tends to more freedom than an Italian dish.

Despite the fact that for the last 15-20 years this universal and capacious genre of art has taken its rightful place in our country, the installation does not receive much distribution, since it is of a non-commercial nature. The authors of most of the works presented in this article are Regina and Ildar Arslanov, Ufa. We advise you to read.

The choice of modern plumbing in our time is so great that when you come to a specialized store, it is easy to get lost in models and designs. various items and appliances. Therefore, if you are going to make repairs in the bathroom, it is best to understand the purpose in advance and arrange the necessary devices and accessories for it in order to immediately assess the possibility of their connection to the water supply and sewerage system.

A toilet bowl is a necessary plumbing fixture, which usually changes without fail during a major overhaul. There are two main types of toilet bowl designs - this is the traditional, that is, floor-standing, and the less common, but rapidly gaining popularity, hanging version. The usual, familiar and time-tested device is installed on the floor and does not cause doubts among users regarding its reliability. But when choosing the second option, questions often arise, and one of them is a wall-mounted toilet bowl with which installation to choose so that it is reliable and durable.

It should be noted that the suspended structure has a number of advantages over the traditional toilet bowl. These notable benefits include:

• It becomes possible to completely hide all plumbing communications in a wall or a decorative box, which often violate the aesthetics of the design of the toilet room.
• Suspended design eliminates the need to fix the toilet to the floor.
• In addition, the floors under the toilet become completely free, and this accordingly entails the following benefits:

- it is possible to install a "warm floor" system over the entire surface of the bathroom floor, without resorting to complex bypass configurations of pipes, cables or heating mats;

- the process of laying ceramic tiles on the entire floor is greatly simplified, there is no need for complex cutouts in this fragile material;

- if the tile is already laid on the floor surface, then you will not need to think about how to fix the floor toilet on top of it without damaging the coating;

- the owners have the opportunity to freely carry out cleaning in all corners of the room, which is very important for maintaining cleanliness in the bathroom;

- an advantage is the compactness of the design, which allows the maximum rational use of the already small area of ​​\u200b\u200bthe bathroom;

• Installing a wall-hung toilet is a reduction in the noise level from draining water, since the tank is built into a wall or box.
• The system, as a rule, assumes two levels of water discharge intensity, which helps to significantly save on its water consumption payment.
• And, of course, the aesthetic side of the issue remains extremely important - hanging toilets really look very advantageous.

To decide on the choice of a hanging option, it will not be enough to get information about the toilets themselves - you first need to figure out what an installation is and what it can be.

What is an installation and its design features

An installation is a frame system built into a wall or a decorative box on which all the elements of a hanging toilet are fixed, as well as a drain tank, valves, water and sewer pipes, and other devices or mechanisms. Design features include the following:

• The drain tank installed in the installation is made of plastic, not ceramic. This is done on the basis that the polymer is always lighter than the ceramic product, which significantly reduces the load on the frame system. And the external data of the tank are not taken into account - it will not be visible anyway.
• The tank designed for this system differs from the usual one in that the drain button is located on its front panel, while in traditional tanks it is located on top of the tank.

• In the suspension system, the design of the drain button differs from a conventional tank in that it consists of two sectors, one of which provides a complete drain of water from the tank, and the second - only half or even ⅓ of the total volume. This is especially important in cases where you have to pay for water according to the readings of a water meter.
• After the complete installation of the structure, only the drain button and the toilet itself, fixed on weight, will go into the bathroom.
• There are two ways to fix the installation - only to the wall surface, or to the wall and to the floor. Both mounts are quite reliable and able to withstand a weight load of up to four hundred kilograms.
• Suspension systems can be supplied with toilet bowls with various modern forms and a convenient water distribution system when draining it, which greatly facilitates the care of the bowl, and also preserves its “new” appearance for a long time.
• It is very important to know that the dimensions of a niche or box for plumbing installation must ideally match the parameters of plumbing elements. Therefore, when considering the acquisition of such a system, the place of its installation must be measured in advance. There are models equipped with sliding top drains that are set to the desired width, but in this case, the load on the wall will be significantly increased.

Criteria for choosing an installation for a wall-hung toilet

To make the right choice of installation for a wall-hung toilet, you need to take into account some features:

• First of all, you need to pay attention to the parameters of the place where you plan to mount the system, since it will be necessary to be guided by them when buying an installation. In the event that it was not possible to select the desired frame size, you will have to purchase a model equipped with movable elements that allow you to adjust the frame according to the parameters of the niche intended for it.
• If you plan to purchase a kit immediately with a toilet bowl, then special attention should be paid to its design and workmanship. This element general design is particularly important, and the criteria for its selection will be considered separately below.
• Having chosen the desired installation model, it is necessary to carefully check its configuration, since in the absence of individual parts it is sometimes impossible to complete the installation of the structure. The installation kit may include various parts, but it is recommended to purchase a design that has the following elements:

- supporting frame;

- a set of fasteners;

- cistern;

- key drain tank;

- an adapter for a flush elbow;

- soundproof materials.

• It is very important to take into account the method of installation of the structure, since sometimes additional fasteners will need to be purchased for the general kit.
• It must be remembered that for some models it is very difficult to find a replacement - this factor is also better thought out in advance, having studied customer reviews. If one of necessary details is not included in the factory package, it is better to immediately pick it up and purchase it along with the installation, otherwise it would be wiser to refuse such a purchase altogether. Do not rely on the words of the seller that the items missing in the kit can be easily found anywhere else. It is absolutely illogical - if it is not in the assortment of the store that sells the installation, then it will hardly be possible to pick it up in other outlets.
• It is important to decide which wall the structure will be attached to. If it is a main wall, then the installation is carried out using anchor bolts. If they are not included, they will have to be purchased separately.
• In some cases, although the flush button is included in the kit, it is possible to choose a different model of it that you like more in terms of design or the presence of one or two keys on its panel. Which button is better to choose will depend on the preferences of the buyer, but double buttons will help save on water consumption.

The main types of installations for hanging toilets

Installation for a wall-hung toilet can be one of three types of design. How they are arranged - it is worth understanding in more detail.

• The block installation is a plastic tank enclosed in a solid metal reinforcing frame. The set with this system necessarily includes fasteners for installing a toilet bowl. The block design is most often completely built into the wall, and it is used not only for hanging, but also for floor-standing toilets.

The best option for the place of its installation will be a finished niche in the room of a combined bathroom or a separate toilet. Quite often used as a niche back wall toilet room, which is then closed with a decorative plasterboard partition.

This type of construction is mounted exclusively on the main wall of the room.

The positive aspects of the block installation include its affordable price.

• The frame structure of the installation is a metal frame with high strength and reliability. It can be mounted on the wall, at four points, or on the wall and on the floor.

The obvious advantages of this variety include the fact that it can be installed on any wall design. The frame must be equipped with elements for fixing the toilet bowl, a drain system and sewer outlets.

Such a frame can be fixed on a straight section of the wall or in the corner of the room. In addition, the design is suitable not only for hanging the toilet, but also for the washbasin, as well as for the bidet.

• Corner frame installations are used if it is planned to install a toilet bowl (bidet, sink) in the corner of the room in order to save space. They are fixed on the wall or on the wall and on the floor. Their design is quite reliable and stable, but the price for such frames is usually much higher than for the two previous mounting systems.

Overview of installation models for wall-hung toilets

When choosing an installation system for installation in a particular location, you need to consider it design features. It should be remembered that the frame will be completely hidden in the wall or behind the partition, so there will be no permanent free access to it. And this, in turn, means that it is best to immediately purchase a quality product and reliably install it, so as not to return to this issue.

The table below shows examples of installations for wall-hung toilet bowls. It is precisely those models that have earned high marks both among plumbing installers and among consumers who have tested this equipment in practice. However, as you can see, there are practically no 100% perfect products. A more detailed analysis of these models will be given below the table.

Model name, country of manufacture	Items included in the kit	Construction type	Rating on a 10-point system	Approximate price, rubles (April 2016)
Cersanit DELFI Leon, Poland	- installation; - hanging toilet; - drain button; - mounts.	Framework	8	7500÷7800
GROHE Rapid SL, (38750001), Germany	- installation; - fasteners; - tank; - flush button. Frame height 1130 mm.	Framework	10	11500÷14600
"TECE", Germany	- installation; - flush button with two keys; - soundproof lining; - double flush cistern; - fasteners; - pipes with rubber cuffs for docking with the toilet. Construction height 1120 mm.	Framework	10	12000÷12700
"Geberit Duofix UP320", Switzerland	- installation; - a button designed for a double flush. Construction height 1120 mm.	Framework	10	12300÷14500
Wisa 8050, Netherlands	- installation; - hanging toilet; - flush tank; - toilet seat; - flush button; - fasteners; - soundproof lining. Construction height 1180÷1380 mm.	Framework	8	22000÷28800
"Jika Zeta" Czech Republic	- installation; - oval hanging toilet bowl; - double flush cistern; - double flush button; - fasteners; - seat and cover with microlift.	Framework	7	11000÷12500
Roca Debba A34H998000, Spain	- installation; - double flush cistern; - hanging toilet bowl of square shape; - seat and cover with microlift; - fasteners.	Framework	9	17900÷19800

And now - the promised reviews, both positive and critical, of those consumers who have already tried these models in their bathroom.

• Cersanit DELFI Leon– installation with a hanging toilet, Polish production. It has a very affordable price compared to other manufacturers, in which even the kit does not include a toilet bowl. The model belongs to economy class products, but, despite this, it has quite positive reviews.

Consumers did not have any complaints about the quality of fasteners and plastic elements. Problems can arise in the event of a breakdown of the tank mechanism, the components for which cannot be found, and you will have to completely replace this element with a new one.

From the reviews of this design, its advantages and disadvantages can be distinguished:

The positive aspects of the Cersanit DELFI Leon model include:

- reliability - for some users it works smoothly for 5-7 years;

- Affordable cost of the kit.

Cons of the product:

— sometimes the drain button sinks;

- fixing studs are 240 mm long, so they are not suitable for all walls;

- it is almost impossible to find replacement parts;

- plastic adapters go to the collapsible frame.

• GROHE Rapid SL (38750001) This set is made in Germany. It does not include a toilet bowl, therefore, when purchasing it, you need to calculate certain costs for this accessory as well, since it is advisable to select and buy it at the same time as the installation. However, despite this shortcoming, reviews about this product are more positive than negative.

The design has a powerful reliable frame frame with a high-quality anti-corrosion coating. The installation is attached to the floor and walls. In order not to run into a fake, it is recommended to carefully study the design details - they must be affixed with the GROHE logo.

— high quality of workmanship;

— durability and reliability;

- ease of installation;

- Manufacturer's warranty - 5 years.

Design flaws:

- lack of a toilet bowl;

- rather high cost;

- there are fakes for this model on the market.

• TECE (9.400.005) made in Germany also deserves positive feedback not only from users, but also from specialists.

Design advantages:

— the tank is filled with water absolutely silently;

- soft stroke of the flush buttons;

— easy to find components in case of breakage;

— easy access to all structural elements;

Only one factor can be attributed to conditional disadvantages - this is a rather high price, also taking into account the fact that the toilet is not included in the kit.

• Geberit Duofix UP320 made in Switzerland. The installation is good already because it can be mounted in areas of the bathroom where other models will not work, for example, when pipes passing behind the toilet interfere with installation. This is made possible by the fact that the kit includes powerful fixing studs with a length of 500 mm.

The advantages of this product include:

— high-quality assembly;

— design reliability;

- ease of installation;

— the ability to find spare parts;

- 10 year manufacturer's warranty.

Explicit shortcomings, with the exception of the high price, could not be formulated

• Wisa 8050– this Dutch-made installation is distinguished by reliability and stability in operation. The frame of the frame of the system is powerful and heavy, so it is quite difficult to attach it to the surfaces of the wall and floor, but if it is mounted with high quality, then there will definitely be no questions during operation.

"Pros" of the design:

- the presence of a toilet bowl with a lid equipped with a microlift.

— high-quality and reliable assembly;

- in addition to the direct one, an angular version of the installation is made;

- height adjustment is possible, which is very convenient when setting up the structure.

"Cons" of the model:

- rather high price;

- rather complicated installation, which is aggravated by the lack of available instruction;

- access to service elements is difficult;

- It is very difficult to find spare parts in case of an unforeseen breakdown.

• "Jika Zeta" Czech-made has "polar" reviews, and if we summarize them, we can conclude that a lot depends on the quality of the installation of the structure, but enthusiastic and critical comments are approximately equal.

Advantages of such an installation:

— full completeness of the system, that is, the presence of a toilet bowl;

- structural strength;

— quick filling of the tank;

- affordable price.

Disadvantages of the model:

- leaks on the mounting bolts (may appear with poor-quality installation);

- it is noted that sometimes the drain button sinks;

- the kit includes low-quality gaskets - it is better to immediately change to others;

- Complaints are received about not too high-quality flushing.

When purchasing this installation model, it is necessary to choose a product of Czech production - only in this case you can get a quality product.

• Roca Debba A34H998000 » made in Spain. Just like other models, it has positive and negative reviews, which also directly depend on the installation of the system and, of course, on the originality of production. In order not to purchase a fake of this design, it is recommended to carefully check the documents that the seller must have. The system can be produced not only in Spain, but also in other European countries, for example, in Germany or Poland, but there are also Chinese parties.

So, the positive aspects of users of this system include:

- aesthetic appearance;

— comfortable seat;

- high-quality and quiet water drainage;

— intensity of washing is regulated by the double button;

— the design is convenient in cleaning;

- The toilet does not splash water.

The disadvantages include the following points:

- plastic fastenings of the microlift (if it is installed in the structure) quickly fail, so it is better to choose models with metal elements;

— there was a cracking of the plastic cover.

As a result of all of the above, the conclusion is that before purchasing an installation, especially one that comes with a toilet bowl, it is best to first familiarize yourself with information about it on the Internet, study the reviews of users who have already seen own experience as specific model learned about her characteristic "diseases".

If an installation is purchased without a toilet bowl, then you should also find out in advance how to choose it correctly.

Wall hung toilets

Criteria for choosing a wall-hung toilet

Hanging and attached toilet bowls are fixed to the installation. As mentioned above, the suspended model does not touch the floor, and the attached model is mounted on the floor close to the wall. You should not trust the general opinion that toilets are universal in their design, as they can have different variations.

To determine the choice of this structural element, you need to rely on the following criteria.

• It is better, of course, to purchase an installation complete with a toilet bowl - then it will be possible to avoid searching for a completely suitable model of the latter. In the same case, if you have to buy these elements separately, you need to make sure that they are exactly compatible.
• Next, you need to pay attention to the material and shape of the bowl. Toilet bowls can be made of ceramics, metal, glass, polymers, artificial stone, etc.

However, most often, ceramic products are still found and chosen, which are traditional and more familiar due to their qualities. Ceramic toilet bowls are easy to maintain, they are resistant to any chemical agents, and also quite durable.

• A high-quality toilet bowl made of ceramics has a fairly large mass. It is by this criterion that it can be distinguished from Chinese products, the material of which is porous, and therefore much lighter. Toilets from an eastern manufacturer are not very durable, so they will not last long term, a small or large network of microcracks may appear on its coating over time. Therefore, you should not delude yourself with a low price, since soon enough a low-quality product will have to be changed, which means that new costs will follow.
• The shape of the toilet bowl is selected depending on the preference of the user, design decoration bathrooms and amenities. The toilet bowl must be not only of high quality, reliable in fastening, but also necessarily convenient, therefore, when choosing a bowl, you should sit on it in the store before purchasing it.
• The surface of the toilet bowl must be perfectly flat and not have any deformations in the form of protrusions or recesses, otherwise the seat and lid will not fit snugly against it. And this means that under load they will bend in one direction or the other, which will lead to a quick breakdown.

It is not difficult to check the evenness of the surfaces - you just need to lay an ordinary wooden ruler on the rim in turn in different places and make sure that there should be no gaps between the ruler and the surface of the toilet bowl. If a loose fit is detected, it is recommended to refuse the product, otherwise later this flaw will bring a lot of trouble and unnecessary costs.

• It is very important to pay attention to the toilet flush system, as the ease of use and the quality of cleaning the bowl will depend on it. In older models, the water supply hole was always located in the back of the upper part of the bowl, and flushing was carried out with one jet. In modern products, the design with a circular, cascade or shower flush has proven itself well. In such devices, water is supplied to the toilet bowl from several holes located at different angles around the entire perimeter of the upper part of the toilet bowl. In this case, the water rinses the entire inner surface of the bowl, moving in a spiral.

• The internal design of the toilet bowl may have configuration features that prevent splashing water. However, in some cases, such forms somewhat interfere with the effective cleaning of the bowl from the contents.

If there is an “anti-splash” in the design, then the drain hole is located in the front of the bowl, or it has a platform or shelf that prevents the rapid flow of water.

Overview of models of hanging toilet bowls

Now, knowing what design a hanging toilet can have, we can consider several budget and elite models.

Model name, country of manufacture, illustration	Items included in the kit. Short description models	Price level, rub. (April 2016)
"SANITA Attica-Lux", Russia	This version of the Russian-made wall-mounted toilet bowl has an affordable price and has a peculiar shape. The design provides for an "anti-splash" system - an inclined half-shelf that prevents the occurrence of splashes. The set includes a seat with a semi-oval cover made of Duroplast, resistant to mechanical damage. It has an antibacterial coating that prevents the growth of bacteria. Duroplast does not lose its original color over time, it is resistant to detergents. The lid is produced in two versions - with and without a microlift, fixed on the toilet with the help of metal fasteners, which are more aesthetic and reliable than plastic options. The toilet bowl is made of porcelain and has a dirt-repellent coating, so dirt and water do not linger on its surface. The dimensions of the toilet bowl are 590×345×385 mm (L×W×H). Manufacturer's warranty - 5 years. It should be noted that this model of the toilet bowl is not inferior in design and construction, and in some ways even surpasses some foreign analogues.	3900÷5000
Cersanit Malmo, Poland	"Cersanit Malmo" - Polish-made hanging toilet. It has an original design and looks quite aesthetically pleasing in the interior. The product is made of faience and equipped with a Duroplast seat, on which a micro-lift is installed, which ensures smooth closing of the lid. The seat is covered with an antibacterial composition containing silver ions, which prevents the growth of bacteria and ensures the proper level of hygiene and safety. The case is decorated with side glass inserts with an internal pattern imitating the structure of wood. Inner surface the toilet bowl is covered with a dirt-repellent coating, which does not allow dirt and water to linger on the walls. The toilet measures 365x580x360mm (WxDxH) and will fit perfectly into any size bathroom or shared bathroom.	6800 -13800
Villeroy&Boch 6604 10 Subway, Germany	"Villeroy & Boch 6604 10 Subway" - this model is the bestseller, as it has excellent characteristics and famous German quality. Product Features: - hanging oval toilet bowl has a size of 355x480 mm; - anti-splash system; - horizontal drain; - silent filling of a tank; - protective coating "ceramicplus"; - circular drain; - bowl material - sanitary porcelain; - there is no shelf in the toilet, so a direct drain is formed; - fixed on the installation; - revision window through the removable panel of the drain button; - fixings are hidden. Toilets have modern style, the warranty period from the manufacturer for porcelain products is 25 years, for plastic components- 1 year.	10000 ÷ 16500
"Hatria Fusion Q48 YXJ7", Italy	"Hatria Fusion Q48 YXJ7" - Italian model of a wall-hung toilet, made of faience. Equipped with a seat and cover made of polyester, with a microlift system. The dimensions of the toilet bowl are 355×480×350 mm. (W×D×H). There is no shelf in the toilet bowl, but there is an anti-splash system, the water outlet is horizontal. Manufacturer's warranty - one year.	27500÷32000
"Geberit 4-vp4 aquaclean 8000", Switzerland	"Geberit 4-vp4 aquaclean 8000" is a wall-mounted shower toilet that does not require the use of toilet paper. Brief characteristics of this device: - power consumption - 1000 W; - rated voltage - 220V; - current frequency - 50 Hz; - hydraulic pressure range - 1÷10 bar; - water consumption - 1.4÷5.5 l/m; - volumetric air flow - 10 m³/h; - supply water temperature - 37 ˚С; - volume of a boiler - 1,8 l; - power consumption in heating mode - 5 W/h; - maximum load on the device - 150 kg. Considering high cost such a device, it is worth mentioning in addition about other features of this shower toilet model: - the design is equipped with a remote control remote control, allowing you to control the flush remotely; - it is possible to install separate programs for 3÷4 users, in addition to the main function, the possibility of rinsing using a special tool. - with a single press of the device control keys, a jet is supplied and unpleasant odors are removed, and drying with a hair dryer is performed automatically. - the fitting with a bidet tip extends to a length selected by the user and gives a jet of water for washing at body temperature. - water pressure can be adjusted according to individual preferences. - after using the bidet function, the hair dryer nozzle extends and performs a comfortable drying with warm air. - the seat cover is equipped with a microlift, which ensures its smooth lowering. - the material of manufacture and the shape of the seat provides complete comfort when landing. - the lid is fixed on chrome-plated steel hinges that hold it firmly. - the design provides self-cleaning nozzles for water supply. Before the beginning water procedures, they are automatically flushed. After completion of the procedures, the nozzles are also washed special tool and rinsed with clean water. - the toilet has a special dirt and water-repellent coating, thanks to which drops and dirt roll down the surfaces of the walls without lingering. - The device is equipped with an infrared sensor that detects the presence of the user.	195000 ÷250000

If one of the toilet models with an installation was purchased, you should not immediately take up its installation yourself - you should realistically assess your capabilities and existing skills. It is better to entrust the installation to an experienced master who has recommendations, since the “unfortunate plumber” is able to spoil even the most reliable and high-quality installation and toilet model with his improper work. Only in this way it will be possible to avoid leaks, sticking of buttons and other unpleasant moments, which many users often unfairly attribute to a manufacturer's defect.

Video - The correct height of the wall-hung toilet

Video - Which toilet to choose

In addition to traditional toilet bowls, suspended structures have become very popular, allowing you to optimally use the usable area of ​​\u200b\u200bthe room. And from an aesthetic point of view, they look much better than floor models. Do you agree?

The plumbing equipment market offers several options, each of which has its own installation and operation features. We will show you how to choose a toilet installation, what characteristics and parameters are important to consider.

In addition, we will describe the scheme of operation of the suspension system, denote its pros and cons, and also name the best manufacturers plumbing. The material contains a video with expert advice on choosing installations.

This name refers to a steel structure that is mounted into the wall. It is a frame on which the necessary fittings, a toilet bowl or other types of hygiene appliances (sink, bidet) are attached.

The toilet mount, made of durable metal alloy, is used to mount suspended sanitary ware, ensuring the stability and reliability of the entire structure.

All technical communications are closed with a plasterboard false wall, which gives the interior a nice neat design. The hanging toilet bowl and the panel with the button for draining remain in sight.

Image gallery

Components of the system

The complete kit consists of the following components.

installation. This important element is a strong steel structure, which is usually coated with an anti-corrosion coating. The hydraulic piping of the toilet bowl and / or other plumbing is fixed to the frame, and connecting components (couplings, fastening studs) are also installed.

A toilet cistern is mounted to the structure, which plays an important role in the operation of the system, since its quality and durability largely depend on this component.

To prevent corrosion and leakage, the tank is usually made of high quality plastic, and silicone or improved rubber is used for the flush valve gasket.

To prevent water overflow, which can lead to flooding of the apartment, an emergency drain is provided. Manufacturers of modern plumbing comply with European standards, according to which the noise level during the operation of the tank should not exceed 17 dB.

Toilet bowl. Modern designs of installation systems are usually universal: they are suitable for hygienic devices of various brands. In addition to hanging models, frames are also used for some options for floor plumbing, namely for modifications with a “hidden tank”.

The hygienic appliances for sale come in a variety of colors (from traditional white to black and acid bright tones), finishes and designs. Most models are traditionally made of faience or porcelain, but you can find options from other materials: acrylic, metal, glass.

When choosing a model, it is advisable to pay attention to: they can be ordinary or with a "semi-lift". The latter option guarantees smooth closing, which prevents plumbing from mechanical damage during sudden slamming.

An important part of the installation for the toilet is the panel or button for draining, which often has an exquisite design and a wide variety of colors.

flush button. A small but important component of the installation system is the outer panel with the flush button.

This part can have various modifications:

• with flush-stop mode– in this case, flushing can be stopped by pressing the panel again;
• with two flush options- economical, providing for draining half of the tank, and common with a full drain;
• contactless- Operated by infrared rays.

Flush plates can vary greatly in color and design, and are often a real eye-catcher in a toilet or bathroom.

Pros and cons of installing a toilet

Suspended structures have their advantages and disadvantages.

The wall-hung toilet has many advantages, combining an aesthetic appearance with hygiene, reliability, durability and ease of use.

The benefits include the following factors:

• Optimal use of usable space– suspended plumbing takes less space than conventional toilets.
• Visual expansion of the room. The small dimensions of hygienic devices, as well as the absence of a tank, allow you to avoid piling up objects.
• Aesthetics, due to the fact that all the technical details are hidden in the wall.
• hygiene. The wall-hung toilet lacks a leg, where bacteria often accumulate. In addition, it leaves the floor completely open, which makes it easier to clean the room.
• economy. Many models have devices for half draining water, which reduces its consumption.
• Low noise level. The use of installation systems makes it possible to reduce the noise associated with the operation of the tank, since the design has an additional sound-absorbing layer.
• Reliability. Such designs are designed for long-term use. Many manufacturers give a guarantee of 10 years, in reality, models can serve for a longer time.

Obviously, such plumbing devices have many advantages.

The disadvantages of suspended models include:

• Installation of the structure requires care and thoroughness in work. When installing, it is important to take into account many nuances: the height of the frame, its position in the wall and other characteristics.
• The false wall blocks free access to common communications, which may be required, for example, in the case of a centralized replacement of plumbing equipment in the house. If such a need arises, it will be necessary to open the partition, dismantle the cladding or other finishes, and then re-seal the damaged area.
• Hanging toilet bowls, which provide for an installation system, are somewhat more expensive than traditional options for hygiene appliances.

When choosing plumbing fixtures, you need to prioritize, evaluating how important the above are to you, and then make an informed choice.

Image gallery

Modern models in the interior of bathrooms

Various models of wall-hung toilets will perfectly fit into the interiors of toilets/bathrooms, finished in all sorts of styles - from classic to hi-tech and art deco.

However, before you go to the store, you should think in advance not only the preferred design, but also the place where the plumbing will be located, as this factor leaves its mark on the choice of a hygienic device.

There are various options for installing a toilet installation in the interior.

Standard design layout. Suitable for normal installation against one of the walls regular frames(frame or mounted), made by various manufacturers.

Installation on both sides of the partition. In this case, it is better to prefer a three-dimensional design, in which you can hang the components of the plumbing kit on both sides of the wall.

In this case, the flush key is mounted on the upper edge of the partition in a horizontal, and not frontal position. This type of installation is particularly suitable for wooden floors, which are often found in country houses, dachas, cottages.

Corner version of the system. Ideal for small spaces.

Corner hanging toilet is perfect for arranging compact spaces. This model has an elegant appearance and occupies a minimum of usable space.

There are two installation options available for this:

• Purchase a corner mounting module.
• Choose a standard frame, but purchase special fasteners to place it in a corner.

Such structures at the junction of the walls look airy and take up a minimum of space.

On an island or under a window. This option allows you to optimally use the section of the wall under the window or zoning the room. For such placement, it is desirable to choose small frame systems, the height of which does not exceed 82 cm.

Line installation. In this case, a single mounting structure is installed that combines several plumbing items at once: a toilet bowl, a sink, a bidet.

The linear arrangement of the installation allows you to fix on the built-in frame not only a wall-hung toilet, but also other types of hygiene appliances, such as a sink and a bidet

In this way, you can install all at once necessary equipment by decorating the room in the same style.

Types of installations by design

It is customary to distinguish between two main types similar structures, which differ not only in technical characteristics, but also in the nuances of installation.

No. 1. Block (mounted) model and its features

This is the simplest and most budgetary installation system, however, it has a significant limitation in use - it can only be installed on a load-bearing main wall. The design includes a plastic tank, mounting plates with anchors, a set of studs designed to attach the toilet bowl.

Installing a block installation

The hinged structure is placed in a niche made in the wall. When applying the frame, it is important to determine the height of the installation, and then mark marks in the right places for installing the mount.

The block design of the toilet installation is simple and budget cost, however, it is only compatible with load-bearing floors

Holes are drilled with a perforator, where dowels are hammered, on which an installation with a screwed tank is hung. After performing a reliability check with the installed gaskets, the drain tank is connected to the communications.

The pins necessary for hanging the hygienic appliance bowl are inserted into the pre-made holes. Then the space under the block is bricked: if there are voids between the false and the main wall, the toilet will press on the partition, as a result of which its finish (for example, tiles) may crack.

The final stage is sealing the hole with a waterproof plasterboard sheet (usually in two layers), which provides for an inspection window, closed by a panel with a button for draining. The toilet is hung last, at the end of all installation work.

No. 2. Characteristics of frame installation

A more complex, versatile, expensive option is a frame structure. This is a durable steel frame with an anti-corrosion coating, to which the fittings required for fixing the installation and the plumbing fixtures hung on it are attached.

Scheme of a standard frame installation for a toilet with typical dimensions printed on it. This design is recommended for most rooms.

Such a system can be installed in any room, regardless of the material of the walls and their strength. However, it should be taken into account that the quality of the partitions directly affects the fastener option. With a load-bearing floor, it is better to prefer wall mounting, in which the entire load falls on the wall.

If you decide to place the installation near a plasterboard or foam block partition, it is advisable to choose the floor option: in this case, the frame is installed on special legs.

There is also a combined modification that provides for fixing the model with four holes for both vertical and horizontal surfaces.

All installation frame systems are adjustable in height (about 20 cm) using legs, which is very convenient, since this feature allows you to install the device at the required distance from the floor.

You can also note the great functionality of such structures. When installing it, you can provide for the device of a shelf or ledge in the wall.

Installation of frame structures

Initially, you should determine the place of attachment of the frame, which can be attached to the wall or installed on the floor. At the same time, you need to determine the height at which the toilet will be located.

After that, the tank is installed. It is brought to him water pipe connected to the inlet fitting.

Flexible pipes should not be used, the service life of which is much shorter than the service life of the toilet bowl and cistern.

Installation of a frame installation for a toilet bowl can be done quite easily, however, this work requires attention and accuracy when connecting all the details.

The sewer outlet of the toilet bowl is connected to the riser using corrugations or directly. At the end of the procedure, it is important to check the strength of the connection by pouring about 3 liters of water.

The final stage is finishing the installation with a double sheet of drywall (GKVL), in which the necessary holes are cut out, after which the drain button is mounted and the false wall is finished.

More information about the technologies for installing a block and frame system is written in.

Overall range of installations for the toilet

When choosing an installation, you need to pay attention to its parameters. This is especially important if a certain place has already been allocated for the installation of the system.

The standard version of block systems has the following dimensions:

• width - 50 cm;
• depth - 10-15 cm;
• height - 1 m.

A typical frame structure usually has the following parameters:

• width - 50-60 cm;
• depth - 15-30 cm;
• height - 0.8-1.4 m.

When choosing frame installations for placing plumbing under the window, it is better to give preference to lower modifications with a height of 80-82 cm. Low wide structures that reduce the load on the walls are preferably used in houses with wooden partitions.

To better meet the needs of customers, many companies produce non-standard modifications of models.

In the assortment of the German company TESE there is an installation with a depth of only 8 centimeters. A slightly wider version of 9 cm is produced by a Spanish manufacturer Roca.

A miniature design 30 cm wide is offered by an Italian company Migliore, and in size range Dutch company WiSA Excellent there is an option with a similar parameter of 38 cm.

The best manufacturers of suspended sanitary ware

Among the most popular brands that produce installations for toilets are Turkish vitra, spanish Roca, Polish Cersanit, well-known German companies TECE, viega, Grohe, Russian brand IDDIS, renowned Swiss brand Geberit, Dutch firm WiSA Excellent, Italian Migliore, Czech Alcaplast.

According to user surveys on specialized forums, installations for toilet bowls by the Swiss company Geberit are of the best quality, providing a number of useful functions, for example, eliminating unpleasant odors

According to surveys of participants in specialized forums, the following five suspended structures were identified:

• The first place was taken by the company Geberit, producing installation systems with a unique seamless cistern.
• The second was shared by the companies Grohe/viega.
• The third went to the German manufacturer TECE.
• Firms settled on the fourth Cersanit and Wisa.
• The fifth place was taken by the budget brand Alcaplast.

In addition to the durability and quality of products, the respondents also paid attention to the design of the models, in particular, to the beauty of the buttons. In their opinion, panels produced by companies Tece, Geberit and Vierga.

When buying plumbing, it is important to remember that even high-quality devices can fail due to factors such as improper installation, poor water quality, and violation of operating rules.

To install suspended plumbing, you must purchase the following set of components:

• installation system. The choice of modification directly depends on the quality of the walls: the block one is suitable only for strong load-bearing structures, while the frame one is compatible with plasterboard or foam block partitions. An important point is the planned location of plumbing fixtures.
• Hanging (floor) bowl toilet bowl with the desired lid. When buying, you should definitely find out from the seller whether the kit includes fasteners and an adapter designed for mounting the flush elbow. In case of a negative answer, they will have to be bought additionally (it is advisable to choose parts from the same company).
• Tank and key flush must be purchased separately if the finished kit does not include such elements.
• Soundproof pads. An important component that will provide additional sound insulation, eliminating the sounds of drained water.

When purchasing plumbing, it is imperative to check the components, checking their availability with the list in the instructions.

In addition to the basic structure of a frame or block type, the installation kit also includes various fasteners and pins on which the toilet is installed.

When choosing a model, you should also pay attention to the available additional functions, for example, the absorption of unpleasant odors or the possibility of saving water. It is also necessary to ask the seller how available the components of this company are for sale, if they have to be purchased separately.

Four misconceptions about installing toilets

Myth 1. Since all technical communications are located inside the system, in the event of a simple or replacement of a separate component, it will be necessary to completely destroy the false wall, damaging the cladding or other finishes.

Thanks to the specially left window under the drain panel, you can access the fittings at any time in order to eliminate the most common problems.

Refutation. Get access to drain system can be done easily - through the inspection window, which opens when the panel with the flush button is removed. Such a constructive solution makes it easy to correct shortcomings in the work. shut-off valve and other fittings, replace them.

It is worth adding that the service life of a drain tank made of durable plastic, as a rule, is equal to the period of operation of the entire system.

Myth 2. If any component of the installation for the toilet breaks, it will be difficult to purchase it on a free sale.

Refutation. Finding spare parts for the most popular models of suspended plumbing is not difficult, they are widely available in specialized stores. In case of doubt, you can ask the seller in advance how available the parts of a particular brand are on the market.

Myth 3. Hanging toilet bowls are unreliable and fragile. It is unlikely that such plumbing is suitable for obese people.

Refutation. This category of plumbing is mounted on a solid frame made of steel. The frame is securely built into the wall, which ensures its strength and stability. Manufacturers of such products guarantee that they can withstand a weight of 200-400, and some models even 800 kilograms.

Myth 4. A lot of space is required to install a wall-hung toilet, since a false wall will take up part of the usable area.

Refutation. Suspended plumbing is located directly against the wall, so the installation is given a place that usually occupies a tank of a traditional model of a hygienic appliance.

When placing the structure in a niche with communications, it is even possible to slightly increase the free space of the toilet or bathroom.

Conclusions and useful video on the topic

In the video below, you can hear tips on choosing a toilet installation directly from a specialist:

Wall hung toilets and other hygienic devices combine reliability, convenience and attractive appearance. With their help, you can transform the interior of any sanitary room, giving it airiness and elegance.

There is something to add, or you have questions about choosing an installation for the toilet - you can leave comments on the publication. The comment form is in the bottom block.

When installing this plumbing equipment, special kits can be used. They are designed specifically for fixing such suspended structures, therefore they have significant advantages over outdated technical solutions. If you know what a state-of-the-art installation is, it will be easier to check the value of different sales offers. The information in this article will be useful when performing installation operations. with my own hands and to control the actions of professional teams. In particular, they will help to agree correctly when determining the cost of the services of contractors.

High-quality installation for the toilet: what is it, what modifications do manufacturers offer

Reliable fixation of heavy plumbing products on the wall is a rather difficult engineering task. In the case of this specialized device, the weight of the users has to be taken into account.

These even look easy even with real large sizes. The free space at the bottom simplifies the care and maintenance of the impeccable sanitary and hygienic condition of the room. However, this solution significantly increases the load on the wall.

Here, the components are installed on a special power frame, so it becomes easier to ensure reliable fastening, proper distribution of loads.

In this example, you can see that the frame is resting on a concrete floor, brutally attached to a load-bearing wall. The mating aluminum frame is not affected by additional loads. Attached to it with subsequent finishing flat surface ceramic, other materials.

Inside the building structure, not much space is needed to mount a flat hanging toilet tank. The water seal, connecting pipes, and other components are mounted at the factory, which ensures good tightness of the joints.

The corresponding node is produced in different versions:

• In the simplest version, mechanical drive mechanisms are used. Such products do not always perform their functions stably. It takes a lot of effort to push the button. However, many users are willing to put up with some disadvantages given the relatively low cost.
• To improve the smooth operation of the drain valve, hydraulic and electric drives will be used.
• A floor-mounted toilet with installation will save water if a system with dual buttons is used. They are used to completely or partially empty the tank.
• Additional conveniences are provided by electronic control panels. They turn on the drain mechanism after lightly pressing a button, or touching a special plate.

Note! For this equipment option, it is necessary to provide for the installation of wiring to a 220 V network. In some models, the use of batteries (accumulators) is permissible. But in this case, you will have to control their charge, which creates additional responsibilities for users during operation.

This figure shows various modifications:

• 1 - set for a floor toilet;
• 2 - frame for suspended plumbing;
• 3 - special design for fixing the 8000 series model (Geberit brand).

From this example, it is clear that some manufacturers produce special frames for their own sanitary products. This fact should be taken into account when choosing the appropriate components for a particular project.

Toilet installation: pros and cons compared to traditional engineering solutions

Special kits are more expensive than fasteners, sealants and other products that are used during the reproduction of conventional mounting technologies. Therefore, it is necessary to clarify which is better, installation or. First, we list the benefits that will provide investment in modern equipment:

• The suspended structure extends less towards the room. In this case, a narrow high tank is used, which is able to accommodate the required volume.
• The absence of unnecessary items is not only a good appearance. As noted above, such plumbing is easier to clean from contamination.
• Sets with installation are created in the factory, which implies high quality, reliable guarantees.
• The operating mechanisms are hidden inside the wall structure, which increases the level of comfort. This enables responsible manufacturers to strictly comply with current EU regulations. They limit the noise impact during the operation of the drain to a low level, no more than 17 dB.

However, for objectivity, the following negative reviews about hanging toilets with installation should be noted:

Negative user opinions	Comments
Work operations must be carried out in strict accordance with the manufacturer's official instructions. You have to accurately choose the installation location, provide interfaces with other parts building structures, engineering networks.	This group of reviews only indicates the need for precise execution of actions during the installation process. When using traditional methods, there are also certain limitations and complex processes.
An additional wall interferes with access to hidden water supply and sewerage systems. When emergencies it is necessary to dismantle the structure with a decorative coating.	It should be borne in mind that in this case the costs are less compared to restoring the functional state of the heating system hidden in the concrete screed. If there are doubts about the reliability of hotel networks (nodes), a special door is installed for routine inspections and repairs.
The cost of plumbing with installation is higher than a toilet with a standard cistern.	This is true, but modern products have significant consumer benefits. When choosing which toilet bowl to buy, consider the long service life of the installation kits. Subject to the manufacturer's instructions, they perform their full functions for 15 years or more.

Note! A large plate with a button covers the technological hatch. If necessary, it can be opened to inspect the drain mechanisms, minor repairs, and preventive maintenance.

To find out which toilets are the most reliable, you need to check the reviews of current owners. Pay attention to specific shortcomings that were identified during installation, during operation. As shown in the examples above, some problems can be solved with proper planning their actions.

If you want to know how to choose a wall-hung toilet bowl without mistakes, formulate exactly your requirements. Next, you need to study different designs, choose an acceptable option. Reviews of the current state of the market in the relevant segment will be useful. Be sure to find out the nuances of installing equipment. In case of excessive difficulties, it is necessary to contact specialized specialists for help.

How to choose the dimensions of the toilet for installation without errors

The simplest option is a block design. In such installations for toilet bowls, the dimensions in width do not exceed 50 cm, the depth of the assembly is up to 20 cm, and the height is not more than 100 cm. Various solutions are used to create a compact, but sufficiently durable product. In particular, power elements are installed inside the tank, parts of fasteners are built into them.

The length of the toilet bowl with the installation in this case is minimal, so such solutions are used when equipping small rooms. The relatively low cost should also be noted as a positive parameter. But we must not forget about the limited load capacity. It defines a specific installation technique.

If you use a special metal frame, you can lean it on the floor. To adjust the height, screw supports are installed in the lower part. Plumbing is attached to such a frame. It is additionally attached to the bearing wall. With a slight increase in size, the installation for hanging toilet bowls of this type has greater strength compared to a block structure: width x depth x height (50-60, 15-30, 80-140 cm, respectively).

Such frames are suitable for different sizes of hanging toilet bowls. After installation, they form a single whole with the power frame of the building. They can be combined with walls made of various building materials.

When studying the offers of commercial enterprises, the overall dimensions of the toilet bowl with the installation are evaluated. In some situations, the thickness of the protective and decorative coatings will matter.

Note! The above sizes are average. Modern manufacturers produce miniature installations with a depth of 70-80 mm and a width of 30-35 cm.

A suitable wall-hung toilet with installation: which option is better to choose, taking into account all significant factors

With the help of the information provided, it is not difficult to choose a set of equipment. To simplify the solution of practical issues, you can apply the following algorithm.

When choosing a toilet for installation, you need to check the following parameters:

• permissible load on the power frame;
• correspondence of the distance between the attachment points on the frame and the plumbing fixture.

The design will be hidden in the wall, so its aesthetic parameters do not matter.

Next, you need to study the features of the installation site. For most situations, a standard block or frame kit will do. But you will have to make adjustments when installing the toilet under the window, or on a separate "island". Here you can apply a special frame “reduced” in height, taking into account the corresponding dimensions of the architectural element in the room.

If necessary, you can choose the installation for hanging toilets, which are installed on both sides on one wall. They also produce wide products for sequentially fixing two plumbing fixtures in a line.

This figure explains the need for the preparation of design documentation. It must meet the current standards for me. It is enough to make a simple sketch, put down all the dimensions. Here, for example, you can see that the power frame can be attached to the wall at different angles. Such features will be useful when creating an exclusive design, for solving other practical problems.

When choosing a wall-hung toilet, you can choose a model with a smooth lowering mechanism for the lid. This addition is inexpensive. It eliminates unnecessary noise, eliminates shock loads, prolongs the service life of related parts.

Similarly, one should study the question of which installation for the toilet is better. Various drain systems have been discussed above. Today, even the most advanced devices are offered at affordable prices. If you choose an electronic set with motion detection, it will be possible to drain completely.

At the final stage, you need to check all the components again. In addition to the toilet bowl, the following components and parts are included in the standard package:

• adjustable holders for attaching the frame to the wall;
• built-in drain system;
• fitting for connecting a water supply pipeline;
• storage capacity;
• device to be configured economical consumption liquids;
• pipe for connecting to the toilet;
• carrier frame;
• studs for mounting plumbing fixtures;
• branch pipe for connection to the sewerage system;
• retractable legs with locks for height adjustment.

You will also need:

• set for drain system drive (button, cover, control system);
• anchors and screws, other fasteners;
• materials to improve sound insulation;
• products for a complex of construction works;
• instruments.

What manufacturers of toilet installations offer buyers

If the product meets the specified criteria in terms of size and strength, you should focus on secondary parameters. When the really best toilet installation is chosen, the manufacturer's rating should be supplemented by checking the following nuances:

• To extend the service life, a good anti-corrosion coating of metal parts is useful.
• The seamless design of the tank ensures that there are no leaks.
• Provides protection against condensation.
• Electronic control optimizes water consumption, expands the basic functionality.

The following reviews point out the particular differences between the installation kits of several specialized brands. To find out which company is better to choose a hanging toilet, you need to study the relevant thematic materials.

Reasonable prices and excellent quality: Geberit toilet installation

More than 50 years of specialization in the relevant field - this is an impressive design experience and a really strong guarantee of quality. Currently under this brand on the market is represented wide range of products. It can be easily found turnkey solution for the successful implementation of individual plans:

• A special kit was developed taking into account the peculiarities of domestic standard projects apartment buildings. special form the upper bar and enlarged studs are designed to securely fix the product in a standard plumbing shaft.
• Via special system Duo Fresh prevent unpleasant odors.
• To save space, you can choose a modification with a thin storage tank, the depth of which is only 80 mm.
• The reinforced frame is offered for floor mounting. In this option, fastening to the walls is not necessary.

Modern Wisa installation: reviews confirm no problems

This manufacturer is rightfully proud of its history. The company has been carrying out core activities for more than a hundred years, which confirms the demand for its products in the market.

From this description it is clear that the usual package includes not only the main parts of the structure, but also fasteners, special noise-insulating gaskets. According to reviews - it is not difficult to install such sets even without assistants.

Universal installation for Cersanit toilet bowl

For a convenient comparison, the main series of the current model range are presented in the following table:

Photo and model	Dimensions (height/width/depth), mm	Weight, kg	Peculiarities
LINK	1120-1290/400/165	27	This system can be supplemented with buttons of different types.
HI-TEC	1120-1290/430/160	11	The power frame is designed for maximum loads up to 40 kg.
SLIM & SILENT	1080-1130/520/105	11	The manufacturer has established a guarantee for the steel frame of 10 years.
LEON NEW	1205/395/310	12	A ball valve is included as standard. A special unit provides the possibility of left and right installation of the water supply line.
LINK PRO	1120-1290/395/450	12	This design can be installed in the corner of the room. For this, additional fixing points of fasteners are provided.

If you purchase plumbing in a set with fixtures, it will be provided perfect match individual parts. In such cases, you do not have to worry about the exact fit of the landing dimensions.

As evidenced by the reviews Cersanit installations, users do not experience difficulties during installation and subsequent operation. It should be emphasized that the products of this brand, with good consumer performance, are offered at a reasonable cost.

Reliable toilets Grohe suspended with installation

This brand is well known to domestic consumers. They are associated with excellent quality, impeccable appearance. Stylish reliable things are not cheap. But their use is accompanied only by positive emotions. Groe's installation is ideal for fixing toilet bowls of this brand. Reviews confirm the absence of problems during long-term intensive use.

Why installation is good: reviews and general parameters

The engineering excellence of the products of this manufacturer is highly appreciated by ordinary users and experienced plumbers. If you look at the ratings of wall-mounted toilets, you can quickly see the popularity of Mepa installation kits. In addition to installations, a variety of kits and components are offered. drainage channels, flush keys, other plumbing units and additional items.

How to compare Mepa installation with similar market offers: reviews, prices, technical parameters

Brand/ Model

Height / Depth, cm

price, rub.