The geyser is of high quality and inexpensive. Choice of geyser

The choice of gas equipment must be approached from the point of view of safety and reliability. Buying a cheap water heater can be fatal for its owner. It is necessary to familiarize yourself with the basic requirements for the maintenance of gas equipment. Do you agree?

We will tell you how to choose a geyser in order to purchase the perfect unit. The article we have proposed describes all the criteria that can affect the choice of gas wall-mounted equipment. We present popular models among consumers from proven manufacturers.

The general principle of operation and the device are typical for all models instantaneous water heaters on gas. Propane enters the column through the nozzle. A valve is installed in the pipe that regulates the gas supply.

Water is brought to the adjacent branch pipe in the geyser. A control valve and a sensor are installed in the branch pipe. When the sensor is triggered, the gas enters the burner through the nozzle. The gas ignites in the burner.

In old Soviet models, the gas had to be ignited manually. In modern, three methods of igniting gas are used:

  1. from a piezoelectric element.
  2. From batteries.
  3. from a hydro generator.

Piezo ignition means pressing the button every time you use the gas column (if you use gas economically). This is inconvenient, but more reliable than using automatic ignition, where the gas is ignited by a spark that is supplied by candles.

Image gallery

The membrane in the block rises under the pressure of the water and exerts pressure on the stem, which turns on the gas. If traction is present, then it turns on gas-burner. Water passes through the tank and heats up.

What elements should you pay attention to?

When choosing a column, preference should be given to models with a copper heat exchanger. It may be covered with solder, but should not be made of thin sheet metal. Most often, models of Chinese manufacturers have tin heat exchangers. The service life of such columns does not exceed three years.

Regardless of the method of ignition, geyser automatic type starts working when water passes through the water block. If there are problems with the supply of a spark, then the cause, first of all, must be sought in the block (+)

The low cost is achieved due to the cheap quality of the metal, which burns out over time. This leads to the need to purchase a new gas column.

Another important characteristic of the heat exchanger is the inner diameter of the tubes. The wider the tube, the less often it is necessary to clean the heat exchanger from scale and small debris from old water pipes.

It looks like a low-quality heat exchanger, which is installed on cheap models of instantaneous water heaters. Inside you can see that the metal is not made of copper and is an alloy of unknown origin.

Also an important detail is the water block of the column. This element must be made of metal. There are models made of plastic.

It looks like a quality heat exchanger that will last more than five years. It can be visually seen that it is made of copper and has sufficient thickness. Some manufacturers cover this element with solder or other coating.

Since the block also contains a mesh filter that needs to be changed, frequent unscrewing spoils the plastic thread and leads to the need for a complete replacement of the water block.

What parameters should be taken into account when choosing?

Before choosing the best option or a private house, you need to decide on the volume of water that comes from the tap. It is necessary to determine how many liters per minute flows out of the tap. To do this, the easiest way is to use a water meter if it is installed in an apartment on a pipe.

To do this, you need to record the readings on the counter. Next, you need to note the time and open the tap at full power, draining the water for exactly a minute. After that, you need to close the tap, and record the readings on the meter again. Then you need to subtract the primary indicators from the final indicators. The resulting number will help you choose the right model for performance.

If the value obtained is less than 10 liters, then it makes no sense to buy models with a capacity of 13-15 liters or more. If the house has old pipes in which the pressure often decreases, then a model with a reduced threshold is needed, otherwise the column will turn off when the water pressure decreases.

Regulation of water and gas supply

According to the method of controlling the water temperature, geysers are divided into manual and automatic. Models with a manual setting method are cheaper than with an automatic one.

Manual regulation implies the presence of two valves on the body of the geyser. Increasing the gas supply leads to more intense combustion and heating of the water. If increasing the gas supply is not enough for optimal heating, it is possible to reduce the pressure of the water entering the column.

The disadvantage of these models is the lack of modulation of the flame in the heating pad. When using two points of water intake at the same time, the water temperature will change. This is uncomfortable, especially if a person is taking a bath at this time.

Models with electronic ignition keep the temperature set by the user. This is achieved by modulating the flame in the burner, depending on the pressure of the water used. The maximum deviation from the specified temperature regime is in the range from 1 to 3 degrees Celsius.

It is very important that the heating of water when turned on runs smoothly, without sudden jumps. If the burner first heats up a lot, and then lowers the temperature, you will have to wait for the water temperature to normalize. This increases the water consumption.

Landmarks on the method of gas ignition

Speakers that are ignited by a piezoelectric element are more reliable than automatic counterparts. Models with a piezoelectric element allow you to manually control the gas supply to the column, unlike automatic igniters. In these models, it is possible to leave the flame on the pilot burner in normal mode.

This allows you not to re-ignite the column with each use. The flame is maintained in the pilot burner and ignites the main heating element when the sensor detects water flow.

The location of the ignition button differs in columns from different manufacturers. In some models, in addition to pressing the button, you have to move the slider

Water heaters that receive a spark from a battery-powered igniter cannot be installed in rooms with high humidity. Condensation forms inside the plastic battery case. Over time, metal parts become damp and need to be completely replaced.

The batteries themselves should be changed as needed. With constant use of the device, the frequency of replacement increases. It is better to use high-quality batteries, they last for a year or more

Columns ignited by a hydro generator are noisy. They emit a small whistle, reminiscent of the wind. In expensive models, this problem is solved by soundproofing the case. These water heaters also turn on when a hot tap is opened. Visually, the hydrogenerator does not stand out, as it is installed in the water heater housing.

According to the method of removal of combustion products

Flowing gas heaters require the removal of combustion products. by the most in a safe way the removal of carbon monoxide is a chimney with a pipe outlet to the street.

The more powerful, the wider the diameter of the chimney pipe. If a water heater is bought to replace a failed device, then you need to measure the diameter of the pipe so that there is no need to dismantle the old one.

On the Russian market, you can find models of instantaneous gas water heaters without a chimney. Their placement in a confined space is hazardous to health. It is highly undesirable to install them in rooms without ventilation holes in the walls.

In the bathroom, their installation is prohibited, as there is a risk of carbon monoxide poisoning. Distinctive feature these models are low power. The article we recommend will acquaint you with.

How oxygen is supplied

AT budget models geysers there is no bottom cover on the case, or there are ventilation holes on the device case.

The disadvantage of this device is the partial ingress of combustion waste into the apartment through these holes. In addition to carbon monoxide, propane can leak

In expensive models, a different oxygen supply device is used. It is a pipe that is removed from the column in its lower part. Additionally, the column body is closed by the bottom and top covers, which does not allow carbon dioxide get into the apartment. The effect is achieved by convection.

How to determine the required power?

Water heaters low power(17-19 kW) are designed for systems with a small and service only one point of consumption. They are installed in houses with old pipes.

It makes no sense to purchase a more powerful column if the system passes less than 10 liters of water per minute. It's a waste of money

If the apartment has good water pressure (10-14 liters per minute), then you can choose a gas water heater for two hot water supply points. Water heaters of medium power (20-24 kW) may react poorly when the pressure in the system decreases, if it is not enough to turn on the automatic gas ignition system.

High power geysers (28-31 kW) are not intended for apartments. They are used in private country houses. Some manufacturers produce modular columns specially designed to work as a single water heating system.

Top Speaker Ratings

All categories contain the top three models with similar features. , the most reliable in operation, is presented in the article. The information collected and systematized by us is based on the opinions of users.

The comparison of water heaters is made on the basis of three criteria:

  1. For one water supply point.
  2. For two water supply points.
  3. Original design.

The best columns for one point of water supply

This rating includes models with a price of up to 20,000 rubles. All models are equipped with a gas leakage protection function. Also, in addition, they have a frost protection mode, which prevents damage to the device during a long absence of heating.

Low power unit - Mora Vega 10

The model has a low power and is designed for installation in an apartment. The heat exchanger is made of copper, with sufficient wall thickness. European build quality guarantees a long service life.

When a breakdown occurs, it is difficult to get spare parts, but they rarely occur. The device operates at a pressure of 0.20. The power of this model is 17.3 kW

Ignition occurs automatically from batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature is obtained. Chimney diameter - 110 mm. The model is made in the Czech Republic.

Small family equipment Bosch W 10 KB

The water heater has a small capacity and is designed for installation in an apartment. The heat exchanger is made of copper, with sufficient wall thickness.

Recently, the company has been reducing the cost of production, which affects the quality of parts. The device operates at a pressure of 0.20. The power of this model is 17.4 kW

Ignition occurs automatically from batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature is obtained. Chimney diameter - 110 mm. The model is made in Portugal.

The undisputed leader - Gorenje GWH 10 NNBW

This model has low power and is designed for installation in an apartment. The heat exchanger is made of copper, with sufficient wall thickness.

Recently, the company has been reducing the cost of production, which affects the quality of parts. The heat exchanger tubes have a small diameter, so it is necessary to install filtration at the water inlet to the column

The device operates at a pressure of 0.20. The power of this model is 20 kW. Ignition occurs automatically from batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature regime is obtained on the screen. Chimney diameter 110 mm. The model is made in Portugal.

The best columns for two water points

All presented models are in the price category up to 25,000 rubles, and also work great on natural and liquefied gas. All water heaters are equipped with gas leakage protection. There is an automatic device that turns off the gas supply when the device overheats.

About why else, besides overheating and what should be done in this case, you will learn from the article we have proposed.

Medium power equipment Mora Vega 13

This water heater has an average power and is designed for installation in apartments and private houses. Can run on LPG. The heat exchanger is made of copper, with sufficient wall thickness.

European build quality guarantees a long service life. When a breakdown occurs, it is difficult to get spare parts, but they rarely occur. The device operates at a pressure of 0.30. The power of this model is 22.60 kW

Ignition occurs automatically, from batteries, but there are options with piezo ignition. Adjustment of the gas supply is carried out mechanically, until the desired temperature is obtained. Chimney diameter - 113 mm. The model is made in the Czech Republic.

Budget representative - Bosch WRD 13-2G

The water heater has an average power and is designed for installation in apartments and private houses. The heat exchanger is made of copper, with sufficient wall thickness.

Recently, the company has been reducing the cost of production, which affects the quality of parts. The model does not have a top and bottom cover. The device operates at a pressure of 0.35. The power of this model is 22.60 kW

Ignition occurs automatically, from batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature is obtained. Chimney diameter - 113 mm. The model is made in Portugal.

Demanded option - Beretta Idrabagno Aqua 14i

This model has an average power and is designed for installation in apartments and private houses. The heat exchanger is made of copper, with sufficient wall thickness.

The kit comes with a water filter. The device operates at a pressure of 0.20. The power of this model is 21.80 kW (+)

The ignition comes from batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature is obtained. Chimney diameter 113 mm. The model is made in Italy.

Speakers with the most original design

In addition to technical specifications, consumers often choose equipment based on appearance. It is important for buyers how the device will fit into the interior of the room where it is planned to be installed.

This list contains models with the most striking and memorable design.

Zanussi GWH 10 with interesting decor

This model has more than 10 front panel designs covered with a thin layer of glass. Regardless of the design, all columns have the same technical characteristics.

The burner of the water heater is ignited by batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature regime is obtained on the screen. Chimney diameter - 110 mm. The manufacturer is located in Italy, and the assembly takes place in China.

Oasis 20 VG/ OG/ EG/ MG/ ZG

This model has 5 kinds of front panel design. Regardless of the design, all columns have the same technical characteristics. The heat exchanger is made of copper, but the wall thickness is small.

The water heater works no more than three years and often breaks down before the end warranty period. The device operates at a pressure of 0.15 and copes with providing one point of water intake. The power of this model is 20 kW

The burner of the water heater is ignited by batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature regime is obtained on the screen. Chimney diameter -110 mm. The manufacturer is located in Germany and assembly takes place in China.

Custom design Atlant 1-10 LT

This model has 15 front panel designs. Regardless of the design, all columns have the same technical characteristics. The heat exchanger is made of copper, but the wall thickness is small.

The quality of the water heater is very poor. Its service life often does not exceed the warranty. The device operates at a pressure of 0.20. The power of this model is 20 kW and copes with providing one point of water intake (+)

The burner of the water heater is ignited by batteries. Adjustment of the gas supply is carried out mechanically, until the desired temperature regime is obtained on the screen. Chimney diameter - 110 mm. The manufacturer is located in China, the assembly takes place there.

Conclusions and useful video on the topic

The video shows frequent breakdowns gas water heaters:

What is dangerous self-installation geyser:

After the choice of the water heater is made, you need to order the installation at the manufacturer's service center. Only in this case, the guarantee for the geyser is valid. This practice applies to all major suppliers.

Savings on installation leads to waste on repairs, which you will have to pay for yourself. The column must be registered in gas service, since once a year it should be inspected by specialists.

Tell us about how you chose a geyser, what criterion became decisive in choosing equipment. Perhaps you have some useful advice in store for site visitors who are planning to buy a gas wall-mounted boiler? Please write your comments in the box below.

If you purchase a really high-quality column, then hot water will be in the house all the time, also - this is enough economical solution, which can provide liquid supply to several water intake points at once. Therefore, let's find out what to look for when going to the store, and which manufacturers should be trusted.

Geyser or electric water heater - which is better to choose

Each type of equipment has its own advantages, gas water heaters have:

  1. Beautiful design.
  2. Simple and convenient operation.
  3. Long service life.
  4. Application safety.

If we compare it with electric boilers, then it is worth mentioning the small size of gas water heaters and their good performance. Modern technologies allow manufacturers to make high-quality and efficient products that are safe to operate, even despite their explosive fuel.

Without productive technology, human life is almost impossible, because we are all accustomed to comfortable conditions and the use of all the blessings of life. That is why the residents multi-storey buildings more and more often they refuse the services of public utilities and purchase a gas water heater. The issue of economy is also important, because such a column will cost less than heating water from central systems or using electrical devices.

Equipment selection criteria

And yet, which boiler to buy? To make the right choice, you need to familiarize yourself with the main characteristics that will help you purchase the best option.

First of all, you need to pay attention to the power of the device. The overall performance of the equipment largely depends on this characteristic, because it determines the amount of water that the column can heat in a certain time.

According to this criterion, gas columns are divided into three types:

  • Low power (17-19 kilowatts);
  • Medium performance (22-24 kilowatts);
  • With high power (28-31 kilowatts).

It is necessary to choose a specific column depending on your needs and the number of water intake points in the apartment. If you need the possibility of water intake from several points at the same time, then it is better to choose the option with medium or high power.

The second criterion for selection will be the type of ignition used. Once upon a time, ordinary matches or a lighter were used to ignite the column. If you meet such a “dinosaur” today, then it is better to bypass it and make a choice in favor of modern models. Now the automatic ignition system works in the column, the spark appears thanks to turbines or batteries, and the wick is ignited only when hot water is used. As a result, to start the system, it is enough just to open the tap, and this is not only convenient, but also safer.

There is another alternative option - piezo ignition, it is quite popular, but not very convenient. The fact is that ignition starts when you press a special button, and if the equipment is installed in hard to reach place so the button is hard to press. Also, in this method, the wick will burn even after ignition, thereby increasing gas consumption.

When choosing a geyser, you can not ignore the type of burner. So, a burner with a constant power needs manual adjustment. It is clear that such a solution is not entirely convenient, because the water pressure in central system changes frequently. It is better to buy a burner device with modulating power, it will independently adjust to the power of the jet and ensure the normal temperature of the liquid.

Safety remains an important factor. High-quality equipment is equipped with a three-level protection system, and an automatic locking function when the flame goes out or when reverse thrust occurs. Also safe columns are equipped with safety hydraulic valves which help to avoid an overheat.

Another important factor will be the removal of combustion elements. Here the columns are divided into two types: turbocharged and chimney. In the first version, the device throws the combustion elements out into the street, and in the second - into the chimney system.

Besides, important criteria are the reputation of the manufacturer, and, of course, the cost of equipment, because no one wants to overpay. Therefore, it is important to buy affordable and high-quality equipment.

Rating of the best geysers in terms of reliability and quality

HEBA 4511

This device is called the best among inexpensive models. It is clear that its functionality is not so wide, but it has everything you need to heat water and ensure safety. Experts advise additional purchase pump equipment(at weak pressure), apply rechargeable batteries, take into account all recommendations for use and regularly call the masters for maintenance, then all the disadvantages of the column can be minimized.

Such a column is inexpensive and is distinguished by its reliability and the absence of unnecessary "bells and whistles". It is perfect for a house where 1-2 people live, and mainly one point of water intake is used. For country houses this is the ideal option.

But if you have small children, then you should not buy HEBA 4511, because it is very difficult to set a stable temperature, the heating process depends on the inlet temperature, and throughput small.

Ariston Fast EVO 11B

An important advantage of this model is its appearance, which differs from traditional white water heater boxes. And if not only reliability is important to you, but also design, then this model will be the best option. Management is quite simple, there is a special handle for this.

In addition, the device perfectly holds heat and is equipped with a fuel leakage protection system. Breakdowns among the owners of such a column happen very rarely.

In the reviews, users note that Fast Evo 11b is suitable not only for apartments, but also for private houses. Additional systems safety devices ensure reliable operation of the equipment.

Positive aspects of the gas column:

  • Does not make noise during operation;
  • Clear control system;
  • Quality assembly;
  • Small dimensions;
  • Operational heating of liquid;
  • Heating limitation function;
  • The model weighs little, so there will be no problems with transportation and installation;
  • Gas control system;
  • Provides hot water two points of water intake at once;
  • The device is equipped with a battery charge indicator.

Disadvantages:

  • During the heating process, drops are possible;
  • The battery needs to be replaced periodically.

Bosch WR 10-2P

Experts often call this column the most reliable. Indeed, the owners make very few claims to this model. Stylish design, compact size, good combination with any style of interior and other characteristics are described only in a positive way.

There may be problems with the device when a serious breakdown occurs, and there is no certified service center nearby. By the way, one of the main disadvantages of Bosch equipment is the high cost of spare parts, so repairing the column will “hit” your pocket. And if you bought this model, then you should be very careful during operation, and then there will be no problems with breakdowns.

If you need simple and reliable equipment from a manufacturer with a good reputation, then you can buy this model. Installation of water heating equipment will not bring problems, a specialist can handle it very quickly. Additionally, you can install a filter for cleaning the liquid.

Column Advantages:

  • Silent operation;
  • Compact dimensions;
  • Ability to turn on even with low pressure;
  • The presence of a flame intensity regulator and a liquid temperature regulator;
  • An automatic ignition system is used, the device turns on when the water is opened and turns off when the tap is closed;
  • The presence of piezo ignition, for which you do not need to buy batteries;
  • Heating temperature limitation function;
  • Automatic safety mechanism.

The model also has some disadvantages:

  • Low productivity (about 10 liters per minute);
  • The device is sensitive to water quality;
  • For cleaning it is necessary to disassemble the device;
  • Service may be difficult (so check with your nearest service center in advance).

Neva Lux 5514

One of the best geysers for an apartment if value for money is important. Experts will no doubt recommend it to you, because in terms of build quality it is in no way inferior to more promoted imported products, but it costs much less.

Users note that after the initial setup temperature conditions, you can not climb to the equipment for several years, everything works efficiently and does not go astray. Heating water takes only a few seconds. It is also worth noting that the geyser of this model is not afraid of changing water pressure in the system.

High quality of the equipment completely satisfies buyers. BUT significant advantage before eminent analogues is the affordable cost. Even when turning on the water at several points of water intake, its temperature remains stable.

Column Advantages:

  • Compact dimensions;
  • Clear control, which is carried out thanks to one handle;
  • The heating of the liquid does not depend on pressure (the device has a hydraulic flame adjustment that takes into account the pressure);
  • The model is equipped with automatic ignition;
  • Fast water heating;
  • High power (gives out up to 14 liters of water per minute);
  • During operation, the column body does not heat up, which eliminates the risk of burns;
  • When turned on, there is no supply of boiling water;
  • Provides 2 points of water intake at the same time without problems with temperature differences;
  • Temperature limit function;
  • Availability of gas control;
  • water system combustion chamber cooling;
  • Reliable protection.

Disadvantages of the model:

  • A little noisy during operation;
  • You have to change the batteries from time to time;
  • Weak point are heat exchangers, the replacement of which is expensive.

Vaillant Mag Oe 11-0/0 XZ C+

Of course, the rating could not do without the products of this eminent German company. This model equipment is equipped with a multi-stage protection system, which makes it completely safe. Availability protective coating eliminates the appearance of rust on the body and extends the life of the device. With a weak pressure of water, experts advise to additionally purchase a pump.

This gas column model is different small size, simple control, and the presence of special modes for winter and summer. Provides two taps with hot water without any problems. The procedure for cleaning the mesh is quite simple, you can handle it yourself.

To increase the life of the geyser, experts advise changing all pipes and installing a water filter, this will eliminate the frequent clogging of the device with debris from old pipes. However, such advice is relevant not only for this model, but for all water heating equipment.

Advantages:

  • Compact dimensions;
  • Easy column adjustment and control;
  • Operational heating of water;
  • Installed burner with automatic modulation;
  • The column is equipped with a gas pressure regulator and a gas control system;
  • There is auto ignition;
  • There are special operating modes for summer and winter time;
  • All equipment nodes are accessible from the front panel;
  • The copper heat exchanger is equipped with a protective coating.

Negative sides:

  • Relatively high cost;
  • Sensitivity to water pressure, with low pressure you will have to buy a pump;
  • Noisy when running at high power.

Electrolux GWH 350 RN

This model is called the most economical geyser, in addition, it very quickly copes with the task of heating water. Even pressure fluctuations will not harm the preservation of the temperature of the liquid. And for this it is not necessary to turn on the device at maximum power, because there is a special, economical mode. The geyser has a self-diagnosis function, the equipment itself will detect malfunctions. This model is perfect for those who value reliability and safety.

Advantages:

  • Good heating power;
  • Easy to operate;
  • Provides hot water to two points at once;
  • The presence of two modes of operation (full and economy);
  • Piezo ignition system that does not need batteries;
  • High-quality copper heat exchanger installed;
  • High throughput;
  • Gas control system;
  • Self-diagnosis function;
  • Fire intensity control;
  • Summer and winter mode;
  • Convenient maintenance, for cleaning it is not necessary to disassemble the device completely.

Disadvantages:

  • High price;
  • Big sizes(height is 72 centimeters);
  • High sensitivity to draft, the device can stop when atmospheric pressure drops;
  • Sometimes it is difficult to find details.

Geysers solve a common problem of lack of hot water supply in a house or apartment. These portable water heaters minimum flow gas fuel are able to provide hot water to residential premises of a considerable area. The main advantages of such devices are small dimensions, the ability to heat a large amount of water, relative cheapness and maintainability. Among the disadvantages is the need for communications to connect speakers. At a minimum, it should be a gas pipe or cylinder, which not everyone has the opportunity to install, and models with electronic control or electric ignition need mains power. In addition, we are dealing with combustion products, so the installation of a chimney and ventilation is mandatory, which complicates the installation of devices.

To choose a geyser with optimal parameters, you should pay attention to the following points.

  • Depending on the power, the device can heat a certain amount of water. To service one circuit, it will be enough to buy a gas water heater with a power of up to 19 kW. If you want to heat the water intake at two points, then the model should have a rating of 20-28 kW. The most powerful water heaters (more than 29 kW) are able to provide residents of a house or apartment with hot water in large volumes.
  • In case of problems with the supply of gas or water, the way out will be the purchase of storage gas water heaters. They are equipped with tanks in which the stock is stored. warm water. Thanks to the thermal insulation of the tank, it is possible to reduce gas consumption.
  • For the safe operation of modern speakers, manufacturers equip devices with various degrees of protection. The presence of a water flow sensor prevents the gas valve from opening in the absence of flow. A thermal flame sensor shuts off the gas supply when the wick goes out. The draft sensor stops the gas supply when the draft in the chimney drops to dangerous level. A useful option is the water overheating sensor, it not only prevents the formation of boiling water, but also reduces the amount of scale in the heat exchanger.
  • Geysers are controlled differently. Most often, models of the average price segment have two control options. One of them regulates the water pressure, and the other is responsible for the intensity of gas combustion.
  • An important parameter in water heaters is the type of combustion chamber and exhaust system. In open chambers, gas burns in the upper part of the column, from where it is immediately removed into the chimney. Somewhat more expensive, but sealed combustion chambers of a closed type look safer. The air supply, as well as the removal of exhaust gases, in such devices is forced. In addition to fans, coaxial chimneys are used in such models.

The most popular among buyers are heaters from Bosch (Bosch), Ariston and Mora (Mora). These European manufacturers are renowned for their reliability and performance. Domestic column Neva - excellent value for money. In the ranking, we will compare the best geysers in various price categories.

The best inexpensive geysers: budget up to 10,000 rubles.

3 Neva 4510-M

Best price
Country Russia
Average price: 7,100 rubles.
Rating (2019): 4.3

The top three geysers are closed by a model from the domestic manufacturer Neva 4510-M. This is the most attractive option for the price, while having decent functionality. Unlike other models, this water heater can work with both natural and liquefied gas, which makes it more versatile. The power of the device is 17.9 kW, and with a capacity of 10 l / min, it can easily provide hot water to the whole house. Water intake can be carried out by several points, so you can use this geyser for several purposes at the same time. Like many models, it is installed vertically on the wall, and communications are connected from below.

Among strengths gas column Neva in the reviews, buyers call low cost, quiet operation and the presence of a thermometer. This water heater has several useful features e.g. battery powered electric ignition. This is convenient, since there is no need to connect the device to a power outlet, and a well-thought-out system for electric fuel ignition requires a minimum of energy and does not need frequent replacement batteries. The column starts to work even with a minimum water pressure of 0.1 atm, which allows it to be used in almost any conditions. As weaknesses, the low quality of materials is distinguished, and, as a result, low reliability.

2 Bosch WR 10-2P

One of the most reliable geysers in the budget segment
Country: Germany
Average price: 8,900 rubles.
Rating (2019): 4.5

Reliable geyser Bosch WR 10-2P takes second place in the ranking among best models budget segment. With a power of 17.4 kW, this device has a capacity of up to 10 l / min, while heating water up to 60 ° C. The temperature is controlled by convenient mechanical rotary switches. On sale you can find two versions of this column - P23 for natural gas from a gas pipeline and P31 for liquefied gas from a cylinder. Reliable protection against leaks is achieved due to the increased operating pressure range - from 0.1 to 12 atm. For the normal functioning of the apparatus, an additional air duct is required, since an open-type combustion chamber is installed here.

The advantages of this Bosch water heater in customer reviews include ease of operation, small size and quiet operation. In addition, the installation of such a device will not be a problem - it is not necessary to invite a specialist. Gas and water supply is carried out from below, and the column itself is hung vertically on the wall. A distinctive feature of this heater is piezo ignition, the principle of which is based on the ignition of fuel by a silicon spark. According to experts, it is an order of magnitude more reliable than electric, in which common problem are burnt nodes. To determine the heating temperature, a special thermometer is displayed on the front panel of the heater. Among the disadvantages of this model are sensitivity to water quality and a slightly overpriced price.

A common question for owners of apartments and private houses: which is better, a gas water heater or an electric boiler? Each type of water heater has its pros and cons, which will be discussed in the following table:

Water heater type

pros

Minuses

Geyser

Compactness (a big plus for a small apartment)

Unlimited hot water supply

maintainability

Reliability

Affordable price

Complicated installation, which must be carried out by a specialist

Approvals required for installation

Chimney and ventilation required

Stable operation requires stable gas and water pressure

Low efficiency

electric boiler

Easy installation

Enhanced Security

No chimney or ventilation required as there are no combustion products

High efficiency (up to 99%)

Ability to provide a large volume of hot water at a time

Independent of water pressure

High price

With a full flow of water in the boiler, the next portion will have to wait at least 1.5 hours.

Large dimensions

1 Electrolux GWH 265 ERN Nano Plus

The best compactness and functionality at an affordable price
The country: Sweden (made in China)
Average price: 6,600 rubles.
Rating (2019): 4.6

In the first place in the ranking of the best inexpensive geysers is the model Electrolux GWH 265 ERN Nano Plus. This flowing gas water heater is suitable for both an apartment and a house. With a power of 20 kW, it can easily heat a large amount of water in short span time. The productivity of the device is 10 l / min, which is quite enough for a comfortable shower. This is an average model for the cost, but with excellent characteristics. The column requires a minimum water pressure of 0.15 atm. At the same time, it is able to withstand up to 10 atm, with the maximum possible in a household network of 5-6 atm.

In numerous positive reviews, buyers talk about excellent power, high reliability and convenient operation as the strengths of this Electrolux model. Installation of the device is vertical, on the wall, which significantly saves free space. The communication line is organized from below, which will be convenient for most apartments. Ignition of the fuel is carried out with the help of electric ignition. Behind safe operation the gas control function is responsible, which prevents any leakage of combustible substance. The disadvantages of this geyser include fine temperature adjustment and high sensitivity to pressure.

The best geysers of the middle segment: budget up to 30,000 rubles.

3 Bosch WRD 13-2G

Optimum price-performance ratio
Country: Germany
Average price: 14,950 rubles.
Rating (2019): 4.4

The Bosch WRD 13-2G water heater ranks third in the ranking of the best geysers in terms of price and quality ratio. This is the most powerful model (22.6 kW), while its cost is somewhat lower than that of its neighbors in the TOP. The productivity of the device is 13 l / min - this is the best indicator in the ranking. Because of open chamber combustion operation of the column is possible only if there is an additional air duct. A distinctive feature of this model is operation at a pressure of 0.35 atm, which allows you to use hot water even at low pressure.

According to buyers, the advantages of this geyser from Bosch are ease of installation and operation, high-quality electric ignition and neat assembly. In addition, the water heater can also work with liquefied gas, that is, from a cylinder. This feature will allow you to use it in country houses, where communication problems are not uncommon. Special protection against overheating will work automatically when the temperature in the device becomes higher than the permissible one. The main disadvantages of this model are a noisy hydrogenerator, sensitivity to gas pressure and an inconvenient location of inlets and outlets.

2 Mora Vega 10

High reliability (according to user reviews)
Country: Czech Republic
Average price: 17,650 rubles.
Rating (2019): 4.5

In second place in the ranking of the best geysers of the middle price category is the Mora Vega 10 device. This is a popular water heater designed to provide hot water to apartments and small houses. In terms of price, this is an average model, which also affects the characteristics. But this device boasts excellent reliability and the ability to work in a wide pressure range - from 0.2 to 10 atm. Electric ignition quickly ignites the fuel, and the "gas-control" function eliminates any gas leaks.

In the positive feedback, buyers talk about ease of operation, heating efficiency and excellent reliability, as positive aspects geyser Mora. It is not necessary to invite a specialist to install the device - detailed instructions the kit will allow you to connect everything yourself. Overheating protection will prevent premature failure of the water heater, and temperature limitation will allow you to choose the optimal parameter for comfortable use of hot water. The disadvantages of users include not always triggered electric ignition and poor heating at low pressure.

Don't get busy independent connecting a gas column without relevant experience. Moreover, it is forbidden by law (any check of gorgaz = a fine). Connection gas appliances should be carried out only by a specialist with a mandatory license (SRO) from his organization.

1 Ariston Gi7S 11L FFI

The best functionality. Electronic control
The country: Italy (made in China)
Average price: 15,746 rubles.
Rating (2019): 4.6

The Ariston Gi7S 11L FFI geyser is the leader in the ranking of the best water heaters in terms of price and quality ratio. This productive model is perfect for use in any residential premises. The ability to work on liquefied gas (from a cylinder) significantly expands its functionality. The heater is controlled by electronic switches, making it easy to set the required parameters. The cost of the device is slightly higher than that of competitors, but it has a closed combustion chamber, which allows it to be operated without the need to install an additional air duct. With a power of 22 kW, the heater has a capacity of 11 l / min, which is enough to meet any household needs.

As advantages of this model in the reviews, buyers indicate an attractive appearance, reliable operation and high-quality automatic ignition. Copper heat exchanger provides maximum efficiency transfer of energy from burning fuel to water. The connecting diameter of communication pipes is 1/2”, so the water heater can be used in most apartments. The work process is fully controlled by digital sensors, the readings of which are displayed. Among the main disadvantages are a small range of operating pressures (from 0.4 to 4 atm) and rather noisy operation.

The best geysers for multiple taps (pressure water heater)

For those rooms where there are several hot water intake points, pressure water heaters will be the best option. Flow Models may not be able to cope, since at the same time it is required to supply a sufficiently large amount of hot water, and in pressure apparatuses its level is constant (pumping is carried out), which makes it possible to provide a certain reserve consumed by several receivers. The device is installed in a common riser, where distribution takes place.

3 Neva 4511

The most popular geyser
Country Russia
Average price: 7 312 rubles.
Rating (2019): 4.2

The popular domestic geyser Neva 4511 takes second place in the ranking of the best pressure water heaters. Unlike its competitor, this model can run on liquefied gas. A powerful hydro generator provides a capacity of 11 l / min, and high-quality a heating element with a power of 21 kW quickly raises the water temperature to the required level. The wall mounting method is convenient, as it saves space in the room.
In numerous reviews of the Neva geyser, buyers highlight convenient operation, small dimensions and low cost as strengths. The display shows current information about the temperature of the water in the machine. The body is painted with high-quality lead-free enamel, making the heater environmentally friendly. The operating pressure range is from 0.3 to 6 atm - ideal for domestic networks. The weaknesses include the presence of noise during operation and the low reliability of some nodes.

2 Gorenje GWH 10 NNBW

Best value for money
Country: Slovenia
Average price: 6 946 rubles.
Rating (2019): 4.4

Gorenje GWH 10 NNBW is considered the best gas water heater with the ability to connect several pressure points. This is a simple pressure water heater that can supply hot water to several consumers at once. The power of the device is 20 kW, which allows you to quickly heat a large volume to the required temperature in a short period of time. The gas is ignited by electrical ignition.

Among the advantages of this model in the reviews, buyers list a copper radiator, low noise during operation and a pleasant appearance. To ensure the safety of operation, the "gas control" function is provided, which eliminates possible gas leaks. To ensure that the coolant is supplied clean and its quality does not affect the life of the column, special filters are installed at the inlet. To track indicators, a small display is provided, where the current temperature is displayed and the power indicator is located. Among the main disadvantages are the low quality of materials and the difficulty in replacing filters.

1 Bradford White M-I-30S6FBN

The best geyser accumulative type
Country: USA
Average price: 29350 rubles.
Rating (2019): 5.0

The geyser of the Bradford White M-I-30S6FBN storage type provides a house or apartment with a constant supply of hot water. The device is able to supply a large volume of heated water to several points at once. The model is good because it allows you to successfully deal with water pressure drops in the main. The device heats 125 liters of water per hour, raising the temperature by 50°C. The presence of a non-volatile control system allows you to automatically maintain the water temperature in a given range. And the insulated inner tank reduces heat loss. The geyser can operate at a minimum working gas pressure of 88 mm of water column. An important feature of this model is the preservation drinking qualities water. This is achieved thanks to turbulent flows that prevent the deposition of scale and increase the performance of the device.

Domestic consumers highly appreciate the durability of the model with uninterrupted operation. The volume of heated water is enough for a family of 4-5 people.

The best premium geysers: budget from 30,000 rubles.

The most expensive gas water heaters provide the residents of the house with the necessary supply of hot water. This requires minimal human intervention in the operation of the heater.

3 Ariston SGA 200

The best combination of price and quality
The country: Italy (produced in Russia)
Average price: 37610 rubles.
Rating (2019): 4.8

The Italian geyser Ariston SGA 200 boasts the best combination of price and quality. The accumulative type device is equipped with a tank with a capacity of 195 liters. With a floor mounting option, the heater has a height of 170 cm. The manufacturer has fully adapted the heater to the specifics of Russian gas, the use of liquefied fuel is allowed. Stable operation of the gas column is maintained even at a reduced pressure of hydrocarbon feedstock. The special thermal insulation of the tank made of polyurethane foam reduces heat loss by up to 20%. A smoke exhaust sensor, a thermocouple and a limit temperature sensor are responsible for safety during operation. The device can heat water in the absence of electrical energy.

Homeowners and plumbing professionals rave about the model's compactness, performance, and affordability. Comfort during operation provides indicators of heating and inclusion. Among the shortcomings, the attenuation of the igniter is noted even after the device is fully heated.

2 Baxi SAG3 300

Largest water tank
Country: Italy
Average price: 73347 rubles.
Rating (2019): 4.9

The best model with a built-in tank was the Baxi SAG3 300 capacitive geyser. The device can heat water from 15 to 65 degrees in 0.97 hours. At the same time, there is a supply of hot water with a capacity of 300 liters for consumers at any time. Mechanical control is simple and reliable. The device can operate as natural gas(flow rate 2.45 cubic meters / h), and on liquefied fuel (flow rate 1.83 kg / h). The gas water heater is not afraid low pressure gas, with its help the problem of interruptions in water supply is solved. Due to the high performance and the necessary stock hot water simultaneously can be fed to several points of water intake. The device uses such security systems as a draft sensor, a safety valve (8 bar) and a thermal sensor.

Experts in the reviews highlight such advantages of the Baxi SAG3 300 geyser as performance, noiselessness, and the absence of scale in the heat exchanger. The disadvantages include high temperature exhaust gases, lack of a pipe for draining water.

1 Bosch WTD 27 AME

The highest power
The country: Germany (produced in Portugal)
Average price: 73,000 rubles.
Rating (2019): 5.0

The best power indicator among instantaneous gas heaters is the Bosch WTD 27 AME model. The column is compact, stylish design and great performance. In addition to being used in large houses and apartments, the unit is also suitable for providing hot water to sports clubs, hotels, cafes, car washes, etc. Thanks to electronic system management and LCD monitor With backlight, it is convenient to set up the device and monitor its readings. The device has an overheating sensor that allows you to save gas. The water faucet is equipped electric drive. The geyser is suitable for providing hot water to several points of water intake, this allows you to make a modulating burner.

In the reviews, ordinary inhabitants and experts agree that the model is the best geyser flow type. It can be configured once and long time do not approach the device. Of the shortcomings, only the high price stands out.

Dramatic changes will occur in the kitchen if you replace old equipment, in particular, a column. The apartment will become more comfortable, nicer.

Choose the best option

Even if the kitchen in it is small, the column will not constrain, harmoniously complement the space. There are many differences between the new columns and the columns of past years, and they will immediately become noticeable. Among them:

  • compactness;
  • variety of design;
  • automatic ignition;
  • protection system.

Each manufacturer tries to win customers over with the strength of parts, build quality, and complement the design with relevant features - branded features. The advantages of operation, service, maintenance increase demand, the profit of the enterprise. In addition, geysers should be beautiful. Not only technical, but also external parameters matter. After viewing the photo, it is easy to understand whether it is worth buying this model. Certainly, specifications more importantly, any gas equipment must be safe. The kitchen is simply obliged to be beautiful, to inspire.

New Year brings a lot of changes

The rating of gas water heaters 2016 is losing its relevance, and it's time to make a new one, which includes models that are popular in 2017. What New Year brought to buyers, what has changed? Leading positions in the ranking of the best geysers in 2017 are not so easy to take.

The main criteria, of course:

  • price;
  • quality;
  • reliability;
  • uniqueness.

Last year, the usual cost remained, the quality remained the same, new equipment was released, fashion changed.

Who is the leader? About everything in order. In the first place - geysers with an electronic display. Reviews about them are the best, it is worth thinking about purchasing.

Such a rational practical addition, as a display, is not yet in every model. Some people need it, some don't. This detail does not particularly affect the quality, reliability, durability of the product. It guarantees a dialogue with the equipment. The temperature of the water is visible, which is easier to regulate. At the same time, gas water heaters do not change their dimensions, they remain compact, which is what people like most of all, perhaps. An electronic display is a step towards the future, therefore, it is models with a built-in display that open the reliability and quality rating of gas water heaters 2017.

The Russian column "Neva 4510-M" has an electronic display. It certainly matters. It is much easier to control the operation of equipment thanks to this innovation. In addition, the Neva 4510-M flow-through geysers heat up 10 liters per minute, the power is 17.90 kW, there is an overheating protection system. Quality and reliability are the hallmarks of this manufacturer's gas equipment.


In this model, both the dimensions and the design of the case are attractive - they cause sincere sympathy. "Beretta", for example, is not so elegant, although it is not inferior in other characteristics, it is just as practical. If a person likes surrealism and its fantastic images, then it is better to choose the Beretta brand. But if the classics are more to your liking, then the choice should be stopped at the Neva column, which you will no doubt like more.

The price of the Neva is also tempting. And if you can save money, there is no reason to refuse pleasant spending. This is a good purchase, it is difficult to argue with this statement, because the column will last for many years without breakdowns. It is easy to operate. Everything is provided in it.

The quality and reliability of German geysers Roda JSD20-T1 comply with international standards. The country where they are collected is China. The process is controlled, the result is checked, the factories are equipped with modern equipment. Such a strategy guarantees a reduction in cost, makes gas water heaters affordable. Interesting design, convenient arrangement of elements, electronic display, warranty service - all these are Roda JSD20-T1 gas water heaters. This is a good choice, a popular model.


Geysers Roda JSD20-A1 is another popular model of this manufacturer. She looks very good. Others available color solutions, not only white body. The apartment will be transformed. There is an electronic display. The cost is pleasantly surprising, and the rating of the best geysers of 2017 without Roda JSD20-A1 would be incomplete. Power of 20 kW, electronic ignition, traction control sensor are just some of the characteristics of this wonderful gas equipment.

Top best gas water heaters should include this model: Zanussi GWH 10 Fonte. This is an excellent example of the well-known quality from the Zanussi company. It has an electronic display, speakers with a picture on the case, white. They are small and look very nice. The price is acceptable, the operation will not cause problems, because many little things are thought out in advance in the column. These are the convenient location of the handles, the smoothness of the surface, the parameters of the hole that provides access to the igniter, and so on.


The quality of the materials from which the body is made, the details, the reliability of the pattern, the power of 18.5 kW, the heating rate of 10 l / min - all these are Zanussi GWH 10 Fonte flow columns. Rating without it would be untrue, dishonest, unfair. This technique is in demand no matter what, because it has brightness and beauty. An apartment with it will become more comfortable, spacious, especially if a column from the times of the USSR worked before.

Halsen WM 10

The rating continues Halsen WM 10. Feedback from people who decide to buy this model promises success to all buyers. There are practically no shortcomings - it has been tested in practice. The column lasts a long time, and it is easy to manage. Breakdowns are rare, the quality satisfies even the most demanding customers. It should be included in the top of the best models.

Each new year of service Halsen WM 10 will confirm the status of the leader. The best flow geysers should be just that. This is an ideal option for an apartment with both a small kitchen and a large one for the home.

Electrolux GWH 265 ERN Nano Plus

Column Electrolux GWH 265 ERN Nano Plus, due to its small size, does not take up much space. But with its design it still attracts attention, it does not hide or hide, it boldly complements the space. She has excellent technical characteristics, which makes her noteworthy buyers. Therefore, it is included in the rating of geysers for apartments, the best, most in demand. The company has been providing residents for many years different countries quality gas equipment. The prices will also pleasantly surprise you. The best options are not necessarily the most expensive.

Mora Vega 10

The Mora Vega 10 column is modest, it is characterized by restraint and rigor in design. There is no electronic display, but the quality is commendable. The rating would be incomplete without her. This is a great option for a kitchen of any size, with any design. It is easy to use, there is nothing superfluous in it. Mora Vega 10 will appeal to those people who value practicality and quality. This is a slightly conservative option, but reliable.

"Ladogaz" VPG 10E

Stylish column with an electronic display "Ladogaz" VPG 10E - this is water heating up to 85 degrees, a throughput of 10 l / minute, a power of 19 kW and good price. Therefore, she is in demand. This is rational decision, bargain. The column rarely breaks, but even in the case when it is broken, finding the right spare part, original, appropriate, is not a problem. Customers trust this company, it is often recommended, and for good reason. For many years, it is she who will delight others with proper work.

If it so happened that there is no hot water supply in your house, but there is gas, then you need a geyser to heat water. Specialists of "Expert Price" analyzed the models of gas water heaters that buyers were most interested in in 2017 and early 2018, and chose the 10 best ones. Now you will learn about them. But first, let's choose a manufacturer.

Which company's gas water heater is better?

Leading positions in terms of popularity, reliability and build quality today are occupied by gas water heaters Czech manufacturer Mora Top. His products never lie in stores for a long time, and therefore sometimes you just need to have time to place an order. Among foreign manufacturers of gas water heaters, the always in demand brands Bosch and Ariston are not far behind. Good value for money products are available at Russian market Zanussi and Hyundai. Best domestic producers are traditionally represented by geysers of the Neva and Ladogaz brands.

Useful tips to ensure long and reliable operation of gas water heaters

  1. Installation and connection must be carried out by qualified personnel. Often, the quality of its work depends on how the geyser is set up.
  2. It is necessary to regularly clean the igniter and heat exchanger from combustion products (it is strange to blame the column for blockages). This will significantly extend the "life" of the device.
  3. In old houses with too low water pressure in the system, it is better to install special pumps. With a stable water pressure, automatic start-up occurs without problems, and the heating temperature will be maintained more correctly.
  4. Must comply important recommendations from the manufacturer specified in the user manual

What else to read