Reviews of geysers Electrolux. Reviews of geysers Electrolux Flowing water heater electrolux gwh 265 ern nanoplus

Gas equipment must be safe, productive and economical. One of the most popular types of such equipment are instantaneous water heaters. They are installed everywhere in apartments and houses where a gas pipeline is connected and there is a special exhaust system. The market for such equipment is represented by many models. One of the popular gas is Electrolux GWH 265 ERN NanoPlus. Reviews about this model, its features will be discussed further.

general description

The Electrolux GWH 265 ERN NanoPlus gas water heater is a popular model. It is produced by a world famous manufacturer. The presented model is manufactured at a factory in Poland. Build quality and specifications are overruled by users and experts alike.

Electrolux is a Swedish company. Its production facilities are located in many European countries. In Russia, a plant for the production of household appliances was built in 2005 in St. Petersburg. However, this production turned out to be unprofitable. It was closed in 2010.

In 2014, the Swedish company equipped 18 hotels that were built to serve the Sochi Olympics. Also, this technique is installed in the main media center. Today, Electrolux represents several of its brands in Russia. This is a technique that is manufactured under the brands Electrolux, Zanussi, AEG.

Household appliances of the Swedish brand are installed in many well-known restaurants, in industrial production. In everyday life, flowing gas water heaters of this company are also often used.

Electrolux appliances, including Electrolux GWH 265 ERN NanoPlus water heaters, have good power ratings. This allows you to provide hot water not only to the bathroom, but also to the kitchen. The design of gas water heaters fits into almost any interior style. Models differ in acceptable dimensions and ergonomic shapes.

Control of equipment is clear for users. A feature of the Electrolux GWH 265 ERN NanoPlus speakers is the adaptation of systems to the operating conditions in our country. The quality of water and gas is taken into account. Also, when developing the model, the creators took into account other features. As a result, protection systems against unstable gas or water supply were installed in the equipment.

The result is a material that is not afraid of temperature changes. Also, other negative environmental influences are not able to violate the integrity of the material. Most speakers from other manufacturers use tin or its alloys as an anti-corrosion component. This material can greatly change the structure of the crystal lattice. As the temperature decreases, it becomes less dense. The atoms of this substance are further apart from each other.

If for some reason there is no heating in an apartment or house in winter, the heat exchanger will become more susceptible to adverse factors. For this reason, the service life of heat exchangers coated with tin or its alloys is shorter. Such negative phenomena cannot affect the durability of the equipment from. Therefore, according to reviews of the Electrolux GWH 265 ERN NanoPlus column, this technique works much longer with proper operation than its counterparts.

It should be noted that the heat exchanger is completely made of oxygen-free copper. Competitor models have the base substance protected by a layer of tin. The material of the heat exchanger is subject to corrosion. Wanting to save money, reduce the cost of production, such companies reduce the layer of protective coating.

In the GWH 265 ERN NanoPlus heat exchanger, there is no protective coating at all. The heat exchanger material does not oxidize at all. Therefore, the use of protective layers in this case is not required. To draw conclusions about whether it is worth buying this model or products from competing companies, you need to consider a comparison of several popular models in this price category. This will allow you to make the right choice.

Comparison with competitors

According to experts' reviews of the Electrolux GWH 265 ERN NanoPlus water heater, this model is one of the best in the group. To make sure of this, you need to consider it in comparison with other popular flow columns. Those in this group are Neva-4510 (Russia) and Bosch Therm 2000 (Portugal). Each of these columns has electronic ignition in its system, with a capacity of 10 l / min. The combustion chamber in the presented models is open.

The digital display is available for models of Swedish and Russian production. The German brand Bosch did not provide for this element in its column. However, an informational LCD display indicating the heating temperature, indicating the presence of a flame, water supply and battery charge is only available in the Electrolux GWH 265 ERN NanoPlus column. This presented product positively differs from competitors.

The minimum pressure of water and gas in the system, at which all three presented models operate, are the same. This equipment is capable of operating with a water supply of 0.15 bar. The gas pressure is 13 mbar. At the same time, the nominal thermal power of all columns is different. For the Russian "Neva", this figure is 17 kW, and for "Bosch" - 17.4 kW. The Swedish model gets a rated power of 20kW. According to this indicator, the presented model bypasses its competitors.

In the presented three columns there is a function of adjusting the gas power, a thrust sensor is mounted. It also provides for the presence of a protective thermostat, a flame ionization system. However, an all-copper heat exchanger is provided only in the model of the Swedish manufacturer. This instantaneous gas water heater Electrolux GWH 265 ERN NanoPlus also compares favorably with competitors.

In the column of domestic production, the heat exchanger is made of copper, which has not been processed using a special oxygen-free technology. As a result, its material can quickly oxidize. It is coated with tin. It also does not significantly extend the life of the model. Therefore, the columns "Electrolux" and "Bosch" are superior in durability to the Russian "Neva".

If you put all these characteristics together, it becomes clear that the products of the Swedish brand are significantly superior to their competitors in terms of quality, durability and comfort of equipment operation.

It is also worth noting that the heat exchanger of the Electrolux instantaneous water heater does not have dents, bumps or bent edges, as is the case in many models of competing companies. There are no green stains on the copper surfaces of the designs of the Swedish brand. This material does not oxidize. On competitors' heat exchangers, such green spots indicate the beginning of surface destruction processes. The service life of such columns is significantly reduced.

It is also worth noting that the distance between the jacket and the heat exchanger tubes of competitors can be quite large. This indicates a lower efficiency of the equipment than in the Electrolux model. The heat transfer of this water heater is much better than the competition.

Safety system

All systems and the Electrolux GWH 265 ERN NanoPlus heat exchanger are manufactured in accordance with the most stringent modern quality standards that are currently used in Europe and Russia. Therefore, the presented equipment is completely safe to use. The design provides for several systems that are responsible for this process.

A multi-level security system consists of several elements. These include a draft sensor, which, if necessary, transmits a signal to turn off the equipment. Also included is a safety thermostat. It prevents the system from overheating. The hydraulic safety valve helps to protect the equipment from improper water pressure in the system.

Also, the safety system of the geyser includes a flame ionization control device. Modern devices carefully record all column operation data. In the event of various malfunctions, they turn off the equipment.

In order for the operation of the gas column to comply with modern safety rules and standards, the installation may only be carried out by qualified personnel. To do this, after purchasing the presented equipment, you need to contact a specialized organization. It must have an appropriate license from the Gosgortekhnadzor of the Russian Federation.

During installation, an employee of an authorized company must adhere to the rules clearly stated in the Electrolux GWH 265 ERN NanoPlus instructions. Only in this case the company provides a guarantee for its products, and the life of the equipment will be as long as possible. Installing gas equipment yourself is unsafe.

Commissioning must also be carried out by an employee of a specialized company. You need to insert the batteries into the appropriate compartment. Next, turn the power adjustment knob smoothly. The column will be in a standby state until the hot water tap is opened. Sometimes it is not possible to turn on the equipment the first time. The same situation happens after a long stay of equipment in inactivity. There may be air in the gas pipe. It is necessary to repeat the ignition attempts several times. The air at this time will gradually come out of the pipe.

Equipment checks and maintenance must be carried out annually. The procedure includes a number of procedures. They are prescribed by law. It is not recommended to ignore such actions. This work is carried out exclusively by a trained specialist. Doing maintenance yourself is strictly prohibited.

Faults

In some cases, the equipment does not turn on, showing error codes on the display. Electrolux GWH 265 ERN NanoPlus has an intelligent control system. This allows you to quickly determine the cause of the malfunction, eliminate it as soon as possible. All errors are marked with the letter "E". next to it is indicated the number corresponding to the type of failure.

If the E0 error is indicated on the display, this indicates that the system has overheated. The thermal sensor worked in the design. This breakdown is often caused by the failure of some parts. You need to call the master. In some cases, the temperature sensor itself fails. The defective part will need to be replaced.

The E1 error in the Electrolux GWH 265 ERN NanoPlus is quite common. This symbol indicates insufficient battery power. You need to purchase the same batteries as were installed in the system. It is quite possible to replace them yourself. It is not necessary to contact the service center for this. The same error is displayed on the screen if the polarity of the batteries is not observed. You need to check the installation of new batteries again.

If the display shows a breakdown of E2, this indicates a malfunction of the burner. If it goes out, the flame ionizer is activated. You need to check if the piezo is lit. There may also be other problems with the operation of gas equipment.

Other malfunctions

In addition to the listed errors, other malfunctions can be detected in the equipment. So, for example, there may be no gas supply. It is necessary to check whether the fuel supply valve to the equipment is open. Perhaps its flow is blocked centrally by the gas service.

If there is no water flow, you also need to check if the main taps are open, which cut off the water supply to the apartment. If the utility, for example, is carrying out repairs on the system, the equipment will not turn on.

If the outlet water temperature does not reach the desired temperature, appropriate adjustments must be made. We need to increase the gas supply. To do this, turn the knob 1. Sometimes a similar situation occurs when the water flow is too large. You need to decrease it by turning the knob 2.

If the burner flame goes out during operation of the equipment, this may be due to the high temperature of the combustion products that are removed from the system. You need to contact the gas industry and carry out procedures to eliminate the blockage. Also, insufficient water flow leads to a similar situation. You need to increase it by turning knob 2.

If necessary, all spare parts for Electrolux GWH 265 ERN NanoPlus are on sale in the service center. The master who will carry out the repair or maintenance will replace the necessary parts quickly.

If there is a smell of gas in the apartment, you need to shut off its supply and contact the gas service.

Geysers GWH 265 ERN Nano Plus from the Swedish concern "Electrolux" - the most reliable, productive and safe equipment in its class. But poor water quality, power surges in the absence of a stabilizer, user errors are the reason for repairing the water heater using original spare parts.

Advantages of original spare parts

Spare parts, parts and assemblies for the gas column of the GWH 265 ERN NanoPlus series are in high demand, as the equipment is actively used in apartments and private houses. If it is necessary to repair the instantaneous water heater, the craftsmen recommend buying only original spare parts / parts that have a lot of advantages over analog products:

• The accuracy of the dimensions of the spare part, as well as pipes, washers, connectors and other mounting elements;
• Full compatibility - when upgrading the column, the manufacturer adapts every part that perfectly fulfills its function;
• Safety - no gas and water leaks with the risk of an explosion of domestic methane;
• Availability - the cost of the original spare part is slightly higher than the price of the analogue. But the result is significant savings, since the part / spare part will definitely fit in size and last several times longer.

In the event of the slightest malfunction or the need for scheduled maintenance of the GWH 265 ERN NanoPlus column, it is important to purchase original spare parts or analogues certified and indicated in the manufacturer's catalog.

From fasteners to heat exchanger - all original spare parts for repair and maintenance of column

In the catalog of our company, you can quickly select and buy all the spare parts that are necessary for the repair and maintenance of gas water heaters GWH 265 ERN NanoPlus from Electrolux. Regardless of the condition of the equipment and the complexity of the breakdown, you can buy spare parts that are ideal for your equipment:

• Gas-water blocks and water system;
• Ignition blocks and electrodes, igniters and pipes for them;
• Pressure switches, microswitches;
• Thermocouples, temperature limiters, sensors and controllers;
• Electromagnetic, gas valves;
• Membranes, water block covers, body elements;
• Control panels / boards, protective automatics;
• Consumables, fasteners, repair kits, etc.

Experienced engineers of our company will help you to select the necessary spare part, place an order or place an individual request for the delivery of a rare/missing item. Each client will appreciate the benefits of cooperation, as we:

• We offer affordable prices to retail customers;
• We provide fast delivery and certified repair of GWH 265 ERN NanoPlus speakers;
• We have developed special terms of cooperation for corporate and wholesale customers.

Good modern and inexpensive column. Batteries are better to put alkaline. They last much longer.

Leaked after a year of use.

If you installed the column yourself. then you can forget about the warranty, and if the heat exchanger leaks, the cost of repair will be comparable to the cost of a new column.
As soon as our column leaked, they began to look for documents on the purchase of a column in the city link, but they could not find it, and they are necessary for warranty repairs. It's good that in citylink you can make copies of purchase documents only by order number. The order number can be viewed in your personal account on the website or in SMS on your phone.
The column was installed by a master from Gorgaz, so there was an act on the installation of a column with seals. Also in the citylink they put a seal in the column passport (where the store mark should be).
Next, they called the Simona-service company, which is located in Nizhny Novgorod. They confirmed that if the warranty case and there are installation documents, then they will be able to come and repair the column at home (I live in the city of Zavolzhye, Nizhny Novgorod Region).
A few days later, the master arrived and confirmed that the warranty case and we were ordered a new heat exchanger (as they said, more reinforced). After 1.5 weeks, they themselves called, the master arrived in the evening and replaced the heat exchanger with a new one.

Once again I was convinced that citylink is a serious company that cares about its customers. For the last 5 years, I have been buying all household and computer equipment only in citylink. Never had a warranty issue.

0 0

price, dimensions, ease of installation and operation. temperature sensor accuracy!

fastening for children, there is no upper protection against dirt and debris. start-up delay when opening the tap for 5 seconds, sensitive to adjustment settings. the diameter of the outlet pipe of the hood is non-standard.
assembling a china-analogue water heater vector.

I used a Chinese vector water heater for 10 years, it's time to change it - I took an electrolux-offal one-on-one, slightly changed the design and saved on plating ...
slows down at startup, works only when the water supply tap is fully open, does not light up with low pressure ...
I would like more from this company...
the vector and the oasis are cheaper by 2 thousand rubles ... and the performance and efficiency are higher.

Complain Did the review help? 9 6

Convenient control, easy to install, heats perfectly.

Sometimes it doesn't ignite.

The neighbor has a neva, it is not possible to adjust the temperature, but here everything is simple.

Elecrolux GWH 265 ERN NanoPlus is a geyser with electronic ignition designed for preparing hot water. This model is characterized by ease of use and a high level of safety: ignition is carried out automatically when the hot water tap is turned on. Heating power and temperature can be adjusted using the ergonomic knobs on the front control panel. The ionization control unit monitors the presence of a flame in the column.

Advantages of the gas burner Elecrolux GWH 265 ERN NanoPlus

Heat exchanger. Constructed from high quality oxygen-free copper using OXYGEN FREE technology, which guarantees a high level of resistance to oxidation and high temperatures. When using a column, you can be completely sure that it is completely safe for human health and the environment, since its heat exchanger does not contain lead and tin.

Digital display. The control panel of the gas column Elecrolux GWH 265 ERN NanoPlus has a digital LCD display with intelligent control. On the display, you can monitor the water heating temperature, as well as various column operation parameters: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the battery charge level for ignition. If the charge level for ignition is not enough, the battery icon will flash, which means that it needs to be replaced.

Perfect security system. The column has a multi-stage protection system. At the first stage there is a draft sensor, which is triggered in the absence of draft in the chimney or the appearance of reverse draft, turning off the gas supply. The second level of safety is a protective thermostat that prevents overheating of the column. There is also a hydraulic safety valve - it controls the circulation of water in the heat exchanger, which also protects the Elecrolux GWH 265 ERN NanoPlus geyser from overheating. Flame ionization control monitors the presence or absence of a flame on the burner. The self-diagnosis system will promptly notify the user in case of any malfunctions or errors in the operation of the dispenser.

Operation at low gas pressure. Electrolux geysers are designed taking into account the peculiarities of work in Russia, Ukraine, Kazakhstan, Belarus and other post-Soviet countries, where the pressure of gas and water in the mains is sometimes quite low. The minimum water pressure for switching on is 0.15 bar, gas - 13 mbar.

You can find out more information about this model and buy the Elecrolux GWH 265 ERN NanoPlus column from the sales department.

The flowing water heater Electrolux GWH 265 ERN NanoPlus is an extremely easy-to-use geyser with electronic ignition. The ignition of the burner occurs automatically when the hot water tap is turned on, then the heating power and water temperature are adjusted using ergonomic handles on the front control panel. The presence of a flame is controlled by the ionization control unit. The gas burner is made of high quality stainless steel. The chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.

In GWH 265 ERN NanoPlus geysers, the heat exchanger is made of high quality oxygen-free copper using OXYGEN FREE technology, which maximizes its resistance to oxidation and high temperatures during operation and does not require any additional protective layers.

The heat exchanger in NanoPlus geysers does not contain lead and tin, which indicates its safety for human health and the environment, as well as high reliability and durability.

On the control panel of the GWH 265 ERN NanoPlus geyser, there is a modern digital LCD display with intelligent control. The display shows the water heating temperature, as well as various functions of the column operation: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the battery charge level for ignition. If the charge level for ignition is not enough, the battery icon will flash, which means that it needs to be replaced.

Multi-level security system

The first level of the security system is a traction sensor. It works when there is no draft in the chimney or reverse draft appears, turning off the gas supply. The second level of the security system is a thermostat that protects the column from overheating. The third level of safety is a hydraulic safety valve designed to control the circulation of water in the heat exchanger. This protects the gas column from overheating. The fourth level - flame ionization control controls the presence or absence of a flame on the burner. The intelligent control system controls the operation of all sensors. In case of any malfunctions or errors in the operation of the column, an error code is displayed on the LCD display, which is very convenient for maintenance and operation of the device.

Electrolux geysers are designed taking into account the peculiarities of work in Russia, Ukraine, Kazakhstan, Belarus and other post-Soviet countries, where the pressure of gas and water in the mains is sometimes quite low. The minimum water pressure for switching on is 0.15 bar, gas - 13 mbar.

Advantages of the Electrolux GWH 265 ERN NanoPlus geyser:

Electronic ignition

LCD display with water heating temperature indication

Indication of heating temperature, presence of a flame on the burner, water circulation, battery levels

Stainless steel burner

Oxygen free copper heat exchanger

Adjustment of temperature and heating power mode

Multi-level security system

Low pressure water and gas operation

Low gas consumption

Low noise

Universal chimney diameter

Buy with this product

400 rubles

180 rub.

150 rub.

Questions and answers

Hello. I live in a 5 story building. The water pressure is weak, then drops, then normal. The old column (Neva) smoked very strongly (I don’t know what to call it exactly), in general, all the walls turned yellow ... We plan to make repairs, change the finish and at the same time purchase a new column. We opted for Innovita Primo 11 i NG. Will she fit? How often should batteries be changed? We also considered Electrolux speakers (For example, electrolux gwh 10 nanoplus 2.0) Which one is better in this case?

Worth Neva semi-automatic. It works, but what a pain to set it on fire. I want to buy an electrolux machine GWH 10. But I don’t know if the diameter of the chimney is suitable. But it’s impossible for the master to come and see if it’s suitable or not? I'm not an expert, how can I find out.

Vyacheslav

Good afternoon. The column Neva 4510, the diameter of the exhaust pipe is 120 mm, I want to change it to Ladogaz 11PL.s with a diameter of 110 mm. Do I need to install a sealant from an asbestos cord or can I leave the steel exhaust pipe like that.

Good afternoon!
Tell me, please, how much will it cost TOTAL to buy this column, dismantle the old Neva 4513, as well as install and connect this one?
So that you can safely use it?

Also interested in how much this column is safer and more convenient to maintain in comparison with Neva 4513?

I think, take this one or just put the same Neva 4513?

Thank you.

Hello,
Is the Hyundai H-GW1-AMBL-UI 306 column suitable for low water pressure and does not need to be connected to electricity?

Hello, please tell me, a column, with auto-ignition, for the home, for a long service life. Thank you.

Konstantin

Hello, I want to change the gas water heater baltgaz 5514 to baltgaz comfort 17, I would like to clarify the attachment points are identical on these models? And comfort 17 is suitable if I have 3 hot water connection points? There are no problems with water pressure, but 5514 can not cope with water heating only a small trickle. Comfort 17 will solve this problem?

Hello!
There is a Vaillant mag pro column (mag oe 11-0 / 0 xzc + h), connected to the home gas pipeline, three points of consumption come from it - the sink in the kitchen, the sink in the bathroom and the shower / bathroom faucet directly.
The pressure of cold water in the apartment is good. When at least one of the points of consumption is turned on, when a minimum amount of cold water is added to the mixture, the temperature of the total flow drops sharply. That is, the column cannot provide the necessary pressure of warm water. Is it really so low-power or are there problems in connection (connected by the previous owner of the apartment)? If, nevertheless, there is not enough power, then what kind of Neva / Baltgaz would you recommend?

ANSWER: Good afternoon! Your column is not even designed for 2 points of consumption. The only option for 3 points is BaltGaz Comfort 17.

Good afternoon! I choose between Ariston fast evo 11b and Electrolux GWH 11 nanopro 2.0, tell me which one is more reliable? Or can you recommend another one?

ANSWER: Good afternoon! The most reliable at the moment - BaltGaz with a 5-year warranty

Please specify the country of the manufacturer of the geyser Electrolux GWN 12 and 14 at present

ANSWER: Good afternoon! Factory located in China

What is hydro ignition. I want to take a Bosch WRD 13-2G speaker. Am I right.

ANSWER: Good afternoon!
With this system, ignition occurs automatically when the water is turned on, without batteries. But such a system is not very reliable, we recommend purchasing a column with automatic ignition from batteries

What is the warranty period and which components are covered? Do I need to do regular maintenance to keep the warranty?

ANSWER: Good afternoon!
Electrolux speakers are guaranteed for 2 years from the date of installation. To extend the warranty for a second year, it is necessary to carry out maintenance one year after installation - this is a requirement for all gas water heaters.

Hello! Electrolux failed at 14 liters. Worked for 15 years. What column would you recommend as a replacement? Extra "bells and whistles" are not needed. Chose between Electrolux and Bosch. Maybe something else needs to be considered? Thanks

ANSWER: Good afternoon! Electrolux is still a good option. There have been a lot of complaints about Bosch lately - immediately after the warranty period expires, the heat exchanger starts to flow. And as an alternative, you can consider Baltgaz / Neva - no one can compare with them in terms of warranty period

Good afternoon! And who answers the questions? Manager or engineer? If the manager - no questions. If an engineer, then I have 2 questions.
1) in the passport for the gas column it says "capacity 6 l / min", what does this mean? That at any input pressure (volume of passing water) only 6 liters of water will pass through the water block or that the heating indicated in the documentation, for example, by 50 degrees, will be provided only to this volume (if it increases, the water heating will be less at a constant combustion power, if it decreases - heating more)?
2) In the series of gas columns Neva Transit (produced by "China"), the minimum is indicated. water pressure to start 0.02 bar. It's not a mistake? Maybe MPa, not bars? Why such a low value? For all manufacturers, this value is not less than 0.1-0.15 bar (=0.01-0.015 MPa=almost 0.1-0.15 atm).

ANSWER: Good afternoon!
1) This suggests that in a minute the column will release 6 liters of water heated 25 degrees higher than cold water at the outlet. If you want to heat water by 50 degrees, then the productivity will be 3 l / min, respectively.
2) Yes, a mistake. Minimum pressure 0.2 bar. Thanks for posting this, it's been corrected.

Hello!
Help, please, with the choice of a RELIABLE geyser for an apartment, so that it is enough for 2 points of consumption, taking into account the low pressure in the water supply (2-2.5 atm in the system with the taps turned off).

ANSWER: Good afternoon! Our speakers are best suited: BaltGaz Comfort 13 or 15, or Neva 5514. If you are interested in imported ones, then Electrolux 14.

I've heard a lot about mora top speakers being the best. Is it so? and which one would you recommend if not mora for 13 liters?

ANSWER: Good afternoon! Mora speakers are really good, but they have problems with the availability of components and their cost. In this regard, we recommend Neva / BaltGaz and Electrolux gas water heaters, which have no problems with this, and they are reliable - they have a guarantee of up to 5 years.

Konstantin

hello! I have a great desire to buy a gas column Neva 4508 on liquefied gas, in connection with which where can I buy in Moscow?

ANSWER: Good afternoon! You can buy from us, for example))

Good afternoon. There is a gas column AEG 11 ERN. It suddenly broke down - when the water tap was turned on, it stopped giving a spark to the burner (the battery was changed). Is there a possibility of a fix? If not, which one should I change to Bosch 10 - 2V or Bosch 13 -2V at the lowest cost (chimney, etc.)? Thank you.

ANSWER: Good afternoon! AEG speakers have not been sold in Russia for a long time. And you won't find spare parts for it.
We advise you to change not to Bosch, but to a better speaker - for example, Electrolux. In terms of displacement, I think 12 liters will suit you.

Alexey Anatolievich Mikhailov

Good afternoon!
I have an Electrolux GWH 265 ERN NanoPlus (5 years). I suspect a malfunction of the water unit (water oozes presumably from under the gaskets). Question - is it worth changing the entire column? And if it's worth what? The same for another five years - somehow does not warm the soul. Does it make sense to consider Bosch W 10 KB or Electrolux GWH 10 NanoPlus 2.0 as an alternative? Will they be more reliable? The house has problems with water pressure (extremely low, even suites work only with the maximum inverted water flow valve and are regulated only by gas) and there are no problems with gas and traction.

ANSWER: Good afternoon! Most likely, replacing the node will cost almost as much as a new column. Between Bosch and Electrolux choose Electrolux. Bosch 10 KB performed poorly, unlike Electrolux. The model you indicated is correct - Electrolux GWH 10 NanoPlus 2.0, with poor water pressure, it should work fine.

Good evening. Please tell me, what metal is the heat exchanger for electrolux gas water heaters?

ANSWER: Good evening! Electrolux, like many other manufacturers, has a copper heat exchanger

Vladimir Alekseevich

What is the difference between BaltGaz Comfort 13 - 15 columns and Neva 5514 structurally (heat exchanger, ignition, materials used, functionally, etc.)? Thank you.

ANSWER: Good afternoon! The Comfort Series speakers have a digital display showing water temperature and battery level. Otherwise, there are no differences

There are columns Geyser Vaillant MAG?
(it is written that it is out of production, but the price is worth it)

ANSWER: Good afternoon! The speakers are indeed discontinued, we no longer have any leftovers.

Hello.
We bought and connected a Bosch Therm 4000 O WR 13-2 G column. A day later, we noticed that hot water was dripping from the inside of the heat exchanger about once every 1-3 minutes. Sometimes a hissing sound is heard, as if a drop of water is dripping onto a hot surface, possibly a burner. Water drips only when the column is running. When off, water does not flow, although the column remains under water pressure (the valve is closed at the outlet).
Does this mean that the heat exchanger is faulty? Do I need to do something in such a situation, or can it go away on its own with time?

ANSWER: Good afternoon! Most likely condensation is falling, there is nothing to worry about.

What do you recommend to buy. Geyser ... innovita 14i or Baltgaz comfort? What is more reliable? Yuri

ANSWER: Good afternoon! We would recommend Baltgaz Comfort. They have a 5-year warranty, all components are Russian, of good quality. Baltgaz also makes it easier and cheaper to find components in the event of a post-warranty repair.

Hello, we settled on the choice in favor of this product Bosch WR 13-2 B geyser with auto-ignition, but the question remains: "Is it possible to regulate the water temperature not on the column itself, but by opening an additional tap with cold water?" Thanks in advance for your reply

ANSWER: Good afternoon! You can do this, but it is not desirable - the column in this case will serve you less.

Who is the manufacturer

ANSWER: Hello, the manufacturing country of all Bosch speakers is Portugal.

how much does it cost to install a geyser Bosch WRD 13-2?

ANSWER: Hello, usually the installation of a geyser costs 2500 rubles. Materials are paid separately. For details, it is better to check with the manager or installer by phone on the site.

TAMARA Konstantinovna

Hello! Hanging Neva 3208. I want to install Bosch WR13-2P. How much will a replacement cost? Thank you.

ANSWER: Hello, usually the installation of a gas column costs 2500 rubles, the dismantling of the old one costs 350 rubles. Materials are paid separately. For details, it is better to check with the manager or installer by phone on the site.

Thanks, I got an answer to my question.
I have another question. Is it possible to replace the Neva Lux 5013 column with a Bosch Therm 4000 O WR 13-2 B gas water heater and how much will it cost. Thank you.

ANSWER: Good afternoon! Of course you can. Dismantling the old column costs 350 rubles, installing a new one - 2500.

there is a gas column Neva Lux 5013 (5025), which column can be replaced with the lowest labor and material costs

ANSWER: Good afternoon! Consider 5514.