How to properly tie tomatoes photo. How to tie tomatoes in the open field - the best ways

​Related Articles​

Drive in metal stakes at a distance of 30 cm from each other and to a depth of 15-20 cm. The height of the trellises should be selected based on 20-30 cm above the extreme point of an already adult bush. Stretch a wire or twine between the bars (see picture).

Some gardeners use nylon canvas, which can "survive" several seasons.

We note right away that all the methods and recommendations below apply to both greenhouse crops and those grown on open field. There is no difference in the type of garter, nor in the material chosen. It is important to understand the principle of operation and do it very carefully so as not to damage the plant.​

All these varieties are distinguished by tall liana-shaped trunks, the length of which reaches 5 meters. A large number of side branches and a long fruiting period provide such a high popularity of these varieties. Wherein prerequisite is a garter to the trellises (supports).

In most cases, these are varieties of open ground:

The sixth method involves the use of hooks and wire. On both sides of the tomato row, stakes are dug in, between which a cable is pulled. After 30 cm, a fishing line or twine is pulled from it, to which rings and hooks are attached. Hooks and the stems of tomato bushes will be hooked.

fb.ru

How to properly tie tomatoes

The simplest known method is to tie it to a wooden or metal peg driven into the ground. For each bush, a peg is driven in next to it, and the most different materials- nylon stockings, cord from household appliances, ribbons and straps. The bush is tied up near the top of the stem.

Tomatoes must be tied up.

Do not use for tying rope from last season to avoid possible infection.

C early spring summer cottages literally come to life, people dig, loosen, plant in order to get good harvest. Any gardener wants to grow a rich crop of tomatoes to the envy of all his neighbors, some succeed, while others do not. Summer residents often say that some culture loves them and grows well, but some does not love them and does not grow at all. But the point here is different, you need to know how to care for the plants, how to feed them, how often to water, if you want to grow large and tasty tomatoes, then you need to know how to properly tie up the tomatoes.

Growing vegetables is a fun activity. Amateur vegetable growers place on their plots the most diverse cultures. But none of them is complete without juicy and tasty tomatoes. A variety of tomato varieties will require an individual approach to each of them when growing. undersized species tomato - compact bushes that do not require special agricultural practices. But how can you resist the temptation of growing large-fruited varieties tomatoes? They have incomparable palatability. But at the same time such vegetable crops will require more attention than undersized relatives.
When the plant reaches the first two lower rows of trellises, very carefully thread through them according to the “darn” principle, and then, as the bush grows, weave and side shoots. Already fruiting brushes are tied to trellises or wire using plastic clips. You can provide small hooks, the thickness of which will not damage the plant.
Important! If you prefer to reuse nylon or fabric, treat with a solution of laundry soap before tying up the bushes. To do this, it is enough to lather a cloth or nylon and leave for an hour and a half. After rinse and dry.
The following materials are required for the garter:

OgorodSadovod.com

How to properly tie up tomatoes in the open field?

Northerner, From the correct garter tomato depends on how strong and resistant to impact weather conditions they will grow up.

What is the purpose of tying tomatoes?

The advantage of this method is that garter materials can be used every year. The downside, as already mentioned, is the possible infection of plants with diseases left on the garter materials from last year. But there is a way out here too - disinfection of all materials before new use.​

And now let's figure out exactly how.

If you tie up even small bushes, then they begin to form a powerful root system, they become stronger, hence more nutrients delivered to tomatoes. The peg must be driven into the ground already when planting tomatoes, at a distance of about 10 cm from the bush and immediately tied up with a figure eight. You can also use trellises to tie tomatoes, in which case the consumption of the rope will decrease. In theory, amateur gardeners know when to plant, how to grow tomatoes, and are often even satisfied with the result of their work, but if everything is done correctly and master some tricks, then you can significantly increase the yield of tomatoes. There are many varieties of tall tomatoes. They differ in color and size of fruits, which are distinguished by excellent taste. However, growing them is a rather troublesome business. But for the sake of getting large-fruited tomatoes, it is worth working hard. As a rule, vegetable growers grow seedlings of tall tomatoes on their own. For its landing, the land has been prepared since autumn. Tomatoes require well-lit areas with fertile soil. The beds are planned in such a way that it is possible to carry out the necessary agrotechnical measures, during which one cannot do without tying tomatoes. Novice amateur vegetable growers make mistakes when fixing plants.

General rules for garter tomato

Important! The trellis method of supporting tomatoes makes it possible to develop side shoots, increasing the yield of each bush.

You can purchase garter attachments with a tassel holder. Instead of fabric or twine, wide clips with rounded edges are used for fixing, which do not cause any harm to the stems.

Metal rods or wooden stakes (up to 1 meter);

A large number of fruits can break the plant.

amber,

Methods used for garter tomato

A competent garter is not a minor activity that can be neglected, but an important event that affects the quality of the future harvest.

An important point is not to pull the stem with garter materials, so as not to damage it and not subject the plant to death. Since the bush will grow further, it is necessary to equip it with new garters or raise the old one as it grows.

In different climatic conditions, things are different. For example, in the southern latitudes, where tomatoes are grown on large plantations in the rays of the bright sun, it is not advisable to tie them up. The fruits lie on the ground, and the whole plant receives much more useful substances from the ground than in the case of a garter.

Whatever amazing plants grow on their plots gardeners, they almost always make the traditional choice in favor of tomatoes. It is so nice to grow this crop from the very seed, to see how the fruits ripen and to try the very first reddened one right from the garden. There are short, medium and tall tomatoes. Most often, large-fruited, tall varieties are grown in the areas of our country, which require special care. The result is worth it, but to get it,

If everything is more or less clear with growing seedlings and planting time, then few people know how to properly tie up tomatoes.

What is the correct tomato garter? tall plants, depending on the variety, will require pinching and regular fixation of the stem. The tomato garter procedure is performed 3 to 6 times per season. At the same time, this agricultural technique is performed for each plant individually.

Linear trellises are especially popular, when only one row of wire is stretched on top between two stakes at a distance of 30-40 cm. A rope is stretched from the wire to the bushes, around which the plant is wrapped as growth increases. This method also involves stepsoning, since only one main stem can be developed.

The choice of method depends on the variety, the volume of fruiting and the number of bushes.

dressing material;

Water the bush should be strictly under the root, avoiding water on the leaves and flowers. It is almost impossible to water a bush lying on the ground like this. Polar, etc.

sadsamslabo.ru

How to properly tie up tomatoes in a greenhouse

​Each garden culture requires a special relationship. The "sowed - watered - harvested" scheme works in very rare cases, and tomatoes are no exception. This culture is quite critical of the frequency and quality of watering, of timely applied fertilizers, of caring for the tops and garter. Moreover, the last condition applies not only to obtaining a crop, but also to preserving it.

Let's complicate the garter a little by applying tapestries. We put them at some distance from each other and stretch the wire horizontally between them. Between the rows of wire we make a distance of 45 cm. Actually, rows of bushes will be tied to these wires.

1. Residents of cooler regions are unlikely to think about such a method of growing. Periodic rains combined with not the most high temperatures(especially at night) are able to ruin all the efforts of summer residents with the hands of phytophthora or some other misfortunes like rot. That is why here you will definitely have to tie up tomato bushes, even undersized ones. It is necessary to completely exclude the contact of fruits with the ground.

Why you need to tie up tomatoes in a greenhouse

You will have to study the features of the garter of tall tomatoes.

There are several important points here. Spring planting of seedlings of tall tomatoes differ from undersized varieties. bushes certain types can reach 1.5 meters in height. Therefore, plants are planted at a distance of 1 meter from each other. After planting tomatoes, they select material for tying tomatoes.

• All of the above methods are quite popular among gardeners. Which one to use is up to you. In order to choose the right one, consider the growth of the plant, its optimal yield and conditions (greenhouse or open ground).​
• The simplest and therefore affordable is the use of separate supports (stakes) for each bush. You can use any available material, up to scraps of ore and rebar. The only condition is that the length should exceed the final length of the bush by 20-30 cm.
• Twine or wire.

Proper pinching (getting rid of side shoots) can only be done with a tied bush, when there is circular access.

• Such varieties, although they are average in terms of yield, are rarely grown in greenhouses. Basically, the choice is made in favor of abundantly fruiting varieties, mostly tall ones. This is reasonable and reasonable small area soil can be obtained more bountiful harvest. These varieties include:
• ​Content​
• A metal mesh can serve as a good guide for tomato bushes, only its cells should be large

Thanks to the garter, contact of the fruit with the ground and their decay is excluded

Not all varieties of tomatoes are able to "keep themselves" in the process of growth, and even more so the development of fruits. Under the mass of pouring tomatoes, the bushes begin to lean towards the ground and may even break. If injury does not occur, then the future crop is unlikely to benefit from lying on the ground - slugs and worms will enjoy an unexpected gift with pleasure.

1. It is necessary to ensure that the fruits do not come into contact with the ground;
2. This will require, first of all, twine, which should be quite soft and elastic. Wire or fishing line should not be used for this purpose. They can damage plants. Tomato garter pegs should be of sufficient height, fairly strong. Usually these are wooden or metal pegs that can be used for several seasons in a row. The material for the garter of tomatoes is ready. As the plants grow, they begin to fix them. You shouldn't be late with this. Bushes that touch the ground are prone to disease and, as a result, lag behind in development and bear fruit poorly. This will lead to crop loss and a decrease in the quality of vegetable products. The garter is made immediately to permanent pegs that will serve the plant all season. Fixing a tomato bush is easy. A support is installed near each bush. It must be strong enough. The fixation of the plant should not be rigid, and take into account the fact that as the tomato stalk grows, it will thicken. Tomatoes are tied with a soft rope or fabric ribbons. Twine several times (in the form of a figure eight) wrap the stem of the plant and the peg. Then it is fixed on a peg. A free loop is formed between the plant and the peg, which does not interfere with the growth of the plant. As they grow, they carry out repeated garters of tomatoes.
3. Remember, only medium-sized, early-ripening crops do not need a garter.
4. Garter method - at a distance of 5-8 cm from the stem, drive a rod into the ground and tie a bush. During the fruiting period, it will be necessary to tie up at least 1-2 more times, respectively, for an adult bush, an additional garter of each brush is needed.
5. When it comes to growing tomatoes on an industrial scale, it makes sense to use the so-called. trellises (see picture), which allow you to tie up several bushes simultaneously and on the same plane.
6. Fruits lying on the ground are attacked by insects and pests, and are also affected by late blight.

Ways to tie a tomato

• The third way is called linear. A wire is pulled in the middle between the stakes, then a rope is pulled to it over each tomato, one of its ends is attached to the stem of the bush.
• An important condition is to exclude wires, fishing lines and thin ropes from the number of garters for tomato bushes. For this purpose, you need to use nylon tights and stockings. But this is ideal. Various straps and powerful ropes are also suitable, if only the garter is really strong, but gently holding the bush without pinching the stem.
• There is one more circumstance - tomatoes must be watered under the root, and when they are in a supine position, this is impossible. It is undesirable to water the tops of a tomato, as well as pour water on the fruits lying on the ground. And in general, the path to the tops of the plant for any disease in this case is significantly reduced.

You need to tie up even undersized tomato bushes;

No less effective is the trellis method of growing tall varieties of tomatoes. To do this, a trellis is built along a row with planted seedlings. Metal stakes are installed on both sides of the row. On them on different height fasten several rows of twine. Growing plants will be securely fixed on such a trellis.

And if you decide to refuse pinching, choose the trellis method of garter.

It is also convenient to use a garter. This is special device, allowing one movement to wrap around the support and the stem. The principle of operation resembles a stapler, where tape is used instead of a staple. The same device is also used when tying grapes and pumpkin crops.​

Optimal planting is 3-5 bushes per 1 sq.m.m. Only under the condition of a timely garter will all the bushes be healthy and begin to bear fruit on time.

How to tie tomatoes

Honey rescued;

On the issue of the need to tie up tomatoes between gardeners, there are frequent disputes. The first group believes that this process is an interference with nature and reduces the chances of a tied plant to take root and does not guarantee a good harvest. The second group insists on the need for such a procedure, since it removes the load from the fragile tomato trunk and prevents damage to the fruit. The truth, as usual, is somewhere in the middle.​

The fourth way - we make our own cell for each bush. The cage is made of wire or metal. We bend the circles that will be connected by rods. We plant a tomato bush, drop a cage to a depth of 15 cm and tie it with a rope.

In order not to expose tomatoes to the risk of infection with last year's diseases, do not use old garter material.

To avoid unpleasant moments that can negatively affect the final result of all your work,

Tapestry production

For tying, you can’t use wire, fishing line and thin ropes, it’s better to cut old nylon tights, which every woman has a lot of;

The tomato tying procedure is a crucial moment in the cultivation of tomatoes, which should not be ignored. Caring vegetable growers use it not only for tall varieties. undersized tomatoes with this method of cultivation, they get sick less and give excellent harvests.

Many beginner gardeners are interested in why and how they tie up tomatoes. Tomato is a rather capricious and demanding crop that requires increased attention in the process of growing. There are several simple ways allowing you to get a good harvest of tomatoes.

Carefully tied beds make it easy to care for plants. No matter how strong the stems of plants are, in the process of fruit ripening, they begin to bend to the ground, becoming a delicacy for slugs and worms, and sometimes they can break. This is especially true for tall tomatoes that can reach two meters in height.

A simple procedure for tying tomatoes will bring great benefits to the future harvest and save them from typical problems. Why is a tomato garter useful for a beginner gardener?

1. It is important to water tomato bushes under the root, without affecting the tops and fruits, so as not to provoke the appearance of burns on them under the influence of sunlight. Seedlings lying on the ground cannot be watered in this way.
2. Tomato fruits will not be available to caterpillars, slugs, mice and other pests, as they will be located above ground level.
3. The stem, leaves and fruits will be protected from excessive moisture and decay.
4. The stem will not bend or break under the weight of the crop.
5. Securely tied tomatoes will not die from heavy rains that can harm the plant with powerful blows, causing damage to the bushes.
6. Garter tomato in the open field allows you to make tomato bushes as open as possible to the sun's rays, which will give them the opportunity to fully develop.
7. Garter tomatoes will allow you to effectively carry out the spraying procedure to prevent all kinds of diseases.
8. Growing tomatoes is impossible without carrying out procedures such as pinching, mulching. Tying tomatoes will make these processes easier.

How to tie tomatoes

With the development of vegetable growing, several options have been developed and taken root, how, with the help of tying, success in growing tomatoes can be achieved. Here are the main ways to garter tomatoes:

• pegs;
• cells;
• tapestries;
• caps;
• hooks.

With the help of pegs

Many beginner gardeners are interested in the question - how to tie tomatoes to pegs? Using pegs is the most common way. It is important to use it on time. How to use it for a garter for a tomato? It is necessary to choose the appropriate height of each peg, corresponding to the dimensions of the bush. Tall seedlings will need pegs 2-2.5 meters high, medium-sized - much lower. To properly tie tomatoes, you need to use stakes, the height of which is 30 cm more than the height of the tomato bushes.

Each peg must be firmly fixed in the ground, deepening it by 30 cm. It should be located at a distance of 10 cm from the tomato stem so as not to damage the roots (photo 1). The tomato should be tied loosely enough. First you need to tie the twine to the support, then wrap the stem without effort and tie it. As the plants grow, the tomato garter is repeated several times.

It is worth noting that it is important to pre-burn wooden pegs and slats in a furnace or on a fire before installation. Garter on supports with charred ends can be used long time otherwise the pegs will rot by the end of the season.

With the help of cells

When tying, you will need blanks in the form of circles made of thick wire. They need to be attached to metal supports, thus obtaining a strong cell in the form of a cylinder. Structures will be needed in large numbers- one for each bush. It is necessary to dig each cell to a depth of 15-20 cm and tie a seedling to it (photo 2).

Instead of wire and rebar cages, you can make wooden ones by driving one support near individual tomato bushes to get a square cage. It will be much stronger than pegs.

Similar designs They will last more than one year, although for their manufacture you will have to try a little. As the tomatoes grow in the open field, the tying must be repeated several times.

On trellis

Successful cultivation tomatoes is also possible thanks to tying bushes on trellises. The method consists in the fact that wooden supports about 3 m high are driven into the soil at opposite ends of the beds. If the beds are too long, several supports can be driven into one row at a distance of 2-4 m from each other. To their upper part as tightly as possible with the help of nails, you need to nail the slats to get a frame. We stretch the wire horizontally on the supports, the lower one should be located at a height of 25 cm from the ground.

On the resulting frame, you need to make garters for a tomato in the form of a grid using soft wire or nylon rope. The trellis will serve as a solid support for growing bushes, especially if you install it on both sides of the beds. Such a wicker structure is not afraid of any wind (photo 3).

Growing tomatoes on trellises allows you to tie individual bunches with pouring fruits so that they do not bend under their weight.

Supports in the form of caps

You can tie tomatoes in the open field on supports in the form of caps (pyramids). Seedling holes must be prepared by forming a triangle with sides of 35-40 cm. A column about 3 m high is driven in the center of the triangle, from the top of which 3 equal pieces of wire are pulled. They become a support for 3 plants at the same time.

Such "wigwams" can be made from any improvised means - ropes, twine, vines. To cover 4 bushes, you can use and large quantity guy rods with transverse weaving in the form of a cage (photo 4).

Crocheting tomatoes

As a garter for tomatoes, it is convenient to use hooks that will effectively perform their function all summer long. With the help of hooks, the strongest supports for growing giant plants are obtained. This method seems rather complicated for tying tomatoes in the open field, but it is the one that is optimal for tying up tall tomato bushes.

887 02/13/2019 5 min.

The process of growing tomatoes in open areas is somewhat different from growing under film cover. But despite this, it is necessary to tie up both greenhouse and outdoor plants. This procedure is especially important when tall crops are used. Under the weight of the fruit, their branches will bend and lean towards the ground, and in some cases break. All this has a detrimental effect on productivity.

Garter methods

With the right garter, you can get a soft and reliable support. Since there are many options for the garter, you can choose best option, which will not damage plants grown outdoors.

On pegs

This method has been in high demand for a long time. Thanks to him, reliable support is achieved for weak stems of tomatoes. To tie the bushes to pegs, you need to choose stakes with dimensions that will correspond to the height of the plants. Then, using a rope, cut the material for the garter.

On pegs

Place pegs near each bush. It can be metal or wood products. Before tying the plant, it is necessary to destroy harmful microorganisms from the garter material. To do this, it must be boiled in water. Tie the stem of the bush near the top. Wrap the plant with a rope not tightly, but several times, then tie it into a knot. As soon as the bush begins to grow, the rope will need to be lifted up or another garter performed, and the old one dismantled. But what kind of tomato garter in the greenhouse is the most correct, and how it looks can be seen in the photo.

To the trellis

This version of the garter must be used by growing tall vegetable crops in open areas. Then the chosen method of fastening will not allow them to fall. You can make a tapestry with your own hands. To do this, you will need to use wooden pegs, nails, slats and wire. For support, you can use a column made of metal or wood. You will need 3 in total.

To the trellis

The height of the support element should be 3.5 m. After installing the trellis, its height will reach 3 m. The supports are installed in one row at a distance of 4 m. Install the rails in the upper part of the pillars, securing them with nails. Now stretch the wire along the supports in 3 rows, observing a distance of 1 m. And here is how the cucumbers are tied in a polycarbonate greenhouse, indicated

As a result of the manipulations done, a horizontal fence consisting of 3 wires should be obtained.

The installation of the lowest wire should be carried out 20 cm from the ground level. After mounting the frame, using a nylon rope, make a mesh with cells. For these purposes, it is necessary to wind the rope in increments of 20 cm. It will be necessary to manufacture the trellis even before planting the seedlings. And her landing takes place to the trellis, but as the bushes grow, they are directed upwards.

On the video - a tomato garter in the open field:

Line fixation

This version of the garter is also very effective, but only simpler. By analogy with the previous option, it is necessary to mount supports. The wire is stretched in one row.

Linear fixation

Cell Application

To fix tall tomatoes grown in open areas, you can use a method that allows you to make a separate grid for each bush. It must be rigid, and wire and metal arcs are suitable for its creation. The arcs are to be bent and installed over the planted plants. After that, connect them with a wire. The planted culture must be secured with a rope to the crate of the cage.

Using cells

There is another option - this is planting plants in pyramidal caps. They are made from 4 twigs. Such a cap can accommodate 4 bushes. Dig it in when planting seedlings, fix it with wire at the top of the rods.

Hook fastening

This version of the garter has general similarities with fastening to a trellis. Along the edges of the beds it is necessary to install high poles. Attach a wire between them. Tie a fishing line to it with an interval of 30 cm. In this case, the fishing line must be equipped with rings and hooks.

Hook fastening

It is the last elements that are necessary to fix the stems of the bushes. This method of garter is very effective, but laborious and inconvenient to use, so it is rarely used.

On the video - a tomato garter device:

Another option for fixing the stems to the supports will be nylon tights. They can last more than one season, as they do not rot.

If you are going to use the garter next year, then before reuse it should be disinfected by treating with boiling water or laundry soap. So you can destroy various pathogens that affect tomatoes.

It will also be useful to learn about how to use for outdoor tomatoes.

Now on sale you can see various reusable adapted, made of plastic. They can be used to support individual branches with fruits, as well as for garters. Their cost is low, but they will last for many years.

If you grow tomatoes for sale and plant them on large area land, it is worth purchasing special devices - garters. It acts like a stapler, wraps around the stem of the plant and the support with a special tape. Such a product, very popular among those involved in the cultivation of grapes.

To receive high yield tomato grown in the open field, you must definitely take care of the garter bushes. This can be done by different ways. Choose suitable option necessary, taking into account the growth of the plant and the number of fruits on it.

The garter is required to "hold" fragile plants and prevent them from breaking off during the growth period, as well as during fruiting.

For the garter you will need:

• Long bars (sticks, small pipes, thick slats, etc.);
• Short glazing beads (metal trim);
• Wire;
• Leg-split;
• A hammer.

We find a bed with tomatoes. Along the edges with a hammer, we drive one long beam into the ground. It must be strong and stable, as it will bear the weight of all the plants of the row and their fruits. Between these two bars, we fasten the wire along the entire length of the tomato row. We stretch so that the wire does not hang down. We cut the twine into segments equal to the length from the ground to the wire plus 20 cm (for tying). Gardeners recommend using twine folded in half to securely fasten the plant. To avoid "pulling" the plant, use short glazing beads. We tie one end of the thread to each short bead and stick it next to each tomato. We tie the free end of the twine to the wire with a slight stretch.

Carefully take the plant and wrap the tied twine around it. At the crown, we split the threads and fix the shoot between them.

Growing tomatoes has its own characteristics. Just plant seeds and wait for tomatoes to grow, hardly good idea. They are very demanding in their care. One of the rules is a tomato garter, but not all varieties need a tomato garter. Most often, tall varieties are grown this way. You should know how to tie tomatoes correctly, which pegs to choose for a tomato. Indeed, for undersized and tall tomatoes, completely different pegs are needed. So let's figure out how to tie up tomatoes.

To prevent excessive growth of tomatoes, stepchildren should be removed from time to time. You can also often find ovaries and fruits on them, but they almost do not have time to ripen, they suck out the juices from tomatoes more than they need. And it is more convenient to stepchild a tied tomato, and not one that practically lies on the ground.

Tall tomatoes may not support the weight of the fruit and simply break. Tying the fruits is vital, otherwise they can be easily attacked by pests. Also, unbound tomatoes are much more likely to get late blight. Tomatoes hate water on leaves - you need to water the plant carefully. However, this is almost impossible when it is on the ground.

Bad weather can't break your tomato if it's attached. Excessive moisture in the soil will not harm the tomatoes if they are tied up. But if they are in free flight, then most likely they will rot.

As you may have noticed, without a garter, you can forget about tomatoes, no matter how powerful the roots are. Yes, and you yourself will be easier and easier to care for tomatoes.

Video “How to tie up tomatoes”

From this video you will learn how to correctly perform this strategically important act for a good harvest.

Ways

You can tie the tomatoes the way you want. All methods are good in their own way. Yes, the materials are the same.

We will need stakes or metal rods, twine and dressing material, which must be strong and wide. Fishing line and thread - this is not it! They will crash, and eventually the bush will die!

It is best to use pieces of cloth. These can be T-shirts, blankets, pillowcases, etc. Some people like to use old tights - this is also an option, as they will not rot in a season. But remember that they will need to be disinfected in boiling water or laundry soap to protect the tomatoes themselves.

Also now you can find various reusable plastic things both for tying up and for supporting tassels with fruits. They are cheap, so you can buy them. If you are growing for sale and you have a huge amount of tomatoes, then buy a garter. This is a special device, something like a vegetable stapler. It is very popular with those who grow grapes. Therefore, if you have a winemaker friend, then he is guaranteed to have this thing that will make your life a hundred times easier!

Garter pluses:

• Vegetables do not spoil because they are all raised high above the ground.
• Air circulates freely between the bushes.
• Watering tomatoes will become much easier.
• You can easily carry out pinching.
• Tomatoes will begin to bear fruit better and hurt less.

Stakes

Most easy way- use pegs for each tomato. It can be both reinforcement and wooden lath. Their length must be half a meter longer than the final growth of the plant. After all, the pegs are driven in so hard. However, if you have tall tomatoes, then use longer stakes - up to 2.5-3 m in length. When installing the pegs, step back from the stems by about 15 cm so that the roots are not accidentally damaged.

After you have installed the pegs, the stem of the plant is processed with a garter, its ends are crossed with a figure of eight or simply crossed and tied to the pegs. Just don't overdo it with tightness! The same is done with huge brushes so that they do not break due to the weight of the fruit.

Remember that this method is only suitable for medium-sized varieties, if the tomato is heavy, then the support may break and screw up along with the tomato.

The main disadvantage of this method is that you will need to repeat this procedure a couple of times a season.

On the trellis

If you have a tomato plantation because you have a large family or you grow tomatoes for sale, then this method will suit you.

Long spears are driven into the ground, on average, their length can reach up to 3 m. A wire is pulled between them with a step of half a meter. The stems and twigs of tomatoes, as they grow, are tucked behind the wire from different sides. From the outside, it all looks like a braid. Remember that the rope cannot be tightened too much, otherwise the tomatoes will die quickly. If you have big bed, then you can drive in intermediate stakes so that the trellis is stable.

The good thing is that you can leave a couple of stepchildren in tomatoes to increase the yield. This can be done in hot greenhouses, where tomatoes can grow in autumn and winter.

Another subspecies of such a garter is linear. In this case, between the pegs, the wire is pulled not only over but also over each tomato. You will not need to think about how to tie them up, you will only need to wrap them around as the tomato grows.

Cells

The checkered method is similar to the trellis. Prepare pieces of iron and wire instead of the trellis and then install the structure in the same way. If you do not have them, then you can build the same wooden frame. It will be like a high chair without a seat and back. If you make the structure quite wide, then it will easily cover 4 bushes - one for each "leg".