In the production of modern cars, not only metal is used, but also plastic, which loses its properties and attractiveness. appearance over time. First of all, this applies to external parts, such as headlights. Sand, pebbles, precipitation lead to damage to external elements, plastic fades. Headlight glass becomes less transparent, which increases the risk of accidents. Cigarette smoke and ultraviolet light can seriously spoil the appearance of car interior elements, they become dull, and White color turns yellow. Not only does the view of the car become not as attractive as before, but the lighting of the road is also deteriorating. However, there is a way out of this unpleasant situation - to polish the plastic parts of the car either in a car service or at home.
Processing plastic car parts has a number of undoubted advantages:
Plastic allows the use of various methods of working with it, but conditionally they can be divided into the following groups:
The greatest efficiency can be achieved by combining these methods. The process of working on restoring the appearance of plastic parts can be divided into the following stages:
To be successful, you must select quality formulations in an easy-to-apply and store package. For independent daily car care at home, products presented in the form of aerosols, sponges or napkins soaked in the composition are best suited.
For more thorough work on the restoration of plastic parts, more complex compositions will be required.
Among the tools that allow you to put the plastic elements of the car in order at home and polish its surfaces with high quality, it is worth highlighting the gel-plasticizers and restorers.
The effectiveness of their use directly depends on the quality of the compositions themselves, the type of plastic and the degree of damage. The presence of paintwork and glass also require special attention to the polishing process.
For example, for updating and even restoring plastic, as well as vinyl upholstery, a restorer is best suited. After application, it penetrates deep into the scratch, completely filling the space. And the plasticizer gel, with the help of which the textured pattern of the part is obtained, is applied to the damaged elements, which makes it possible to make the plastic homogeneous again.
At the second stage, you can polish the plastic - the choice of rags for work is important here, which must be clean, preferably without lint, so that there is no sticking to the surface.
So, the scope of work is outlined, the composition is selected. It's time to get to work. In the process of putting the headlights in order, the following stages can be distinguished:
Work on the details of the car interior takes less time. In the beginning, the selected composition is applied to the plastic, and then they try to polish everything to the desired state. In total, the order is:
If you follow the instructions and follow the simple rules of work, then even at home an inexperienced driver will be able to achieve excellent restoration of parts. The car will retain a fresh, well-groomed appearance for a long time, the glass is transparent, and the headlights are bright, which is very important for safe driving in the dark and foggy hours of the day.
Plastic has become almost indispensable material. It is found in every home and office. Household items, dishes, toys, household appliances, car elements are made from it, and it is also widely used for interior decoration. Plastic has many advantages such as:
All these qualities allowed him to firmly gain a foothold in the goods market. However, plastic is subject to external influences, as a result of which, scratches and scuffs often appear on it, the original gloss of the object is lost, which will certainly upset everyone. And such an item as a car headlight, if worn, significantly spoils the life of car owners. Replacing headlights is a rather expensive pleasure, and not every driver is willing to spend money on it. But in fact, the wear of plastic is not a reason for frustration, because returning your favorite item is practically original view, you can even at home with your own hands.
To begin with, we determine what exactly needs to be revived? After all, for different items made of plastic, processing may differ. Plastic polishing can be:
Depending on the nature of the abrasion, if there are deep scratches, it is worth grinding before polishing. If there are no deep scratches, polishing will solve all problems.
In fact, having high plasticity and low melting point, plastic is quite easy to both grind and polish. Therefore, if you approach this issue correctly, then polishing will breathe life into even the oldest objects.
So, if you need to update an item that has been badly damaged by external influences and has many obvious scratches, prepare the material. It is necessary to clean the plastic from dirt, greasy traces, residues of special coatings.
It is worth noting that if the plastic is framed by another material, then it is worth pasting over it with masking tape so as not to scratch it while grinding the plastic.
After the material is ready for processing, take a waterproof skin, initially of a rather large texture, and start sanding. The main thing here is accuracy. Slowly, centimeter by centimeter, process the surface, making sure that the material does not overheat. It is very good to sand plastic in soapy water. If possible, you can use a special grinder, this will significantly reduce the time spent on this stage, but in this case you should refuse water!
When you see that deep scratches have evened out, it is worth replacing the skin with a smaller one and continuing in the same way. It is worth changing several varieties of the skin, moving from large to smaller ones, before you get the desired effect. In order not to miss errors, after each stage, wipe the plastic with a dry cloth, so you will see all the shortcomings and be able to correct them in time.
So, we got rid of scratches. The next step, no less time-consuming, will be polishing, which will make the product almost new. How to polish plastic so as not to spoil the thing with your own hands?
After grinding, the surface became smooth and matte, and when polished, it is necessary to achieve smoothness and gloss of the material. AT modern world many car dealerships and companies offer plastic polishing. However, a special paste is used for this, which can be bought at every car shop and simple devices. The choice of polishing pastes is quite large, the first thing to start from is the choice of paste specifically for plastic! Keep this in mind when you buy it, otherwise, due to inexperience, you can not revive the item, but completely ruin it. Contact the consultant in the store, he will certainly advise the one that suits you.
Also, many advise using GOI paste, which is used to polish the plaques on the belts of soldiers. But this option is more suitable for large items that do not require special transparency. For small parts that require the highest quality of polishing, it is still worth using specialized pastes, because they are able to restore the gloss and transparency of the plastic.
There are many polishing methods themselves - someone does it with their own hands, someone with a drill, someone with a grinder.
So, you have decided that you will polish the surface by hand. Option suitable for small surfaces and small parts. Let's start with the pasta we talked about above. Such a paste should be absolutely homogeneous, without any grains and impurities, to make it more glossy, you can add a little oil to it. Apply it better with a piece of felt or felt. Having covered the entire surface of the object, we begin to polish. With light circular movements, with a little pressure, polish the surface for 15-20 minutes. If the part was not badly damaged, then you will like the effect. But if the wear was significant, then it will take much longer to polish.
How to polish plastic with a drill bit.
The second method - polishing with a drill, implies the presence of this very tool in your arsenal. If there is a drill, it works, and you know how to use it, then feel free to go to the store for a special polishing nozzle. Such a nozzle is quite inexpensive and it is not difficult to buy it. However, do not forget to tell the seller that polishing will be done using the nozzle. It is easily attached to the drill and allows you to quickly achieve desired result. With this technology, it is possible to polish the most miscellaneous products, and most often it is used for car headlights, which makes them transparent and smooth. In this case, it is also worth using special pastes, because it is they, in combination with do-it-yourself processing, that give the perfect result.
On this option, you can save some money by replacing the grinding nozzle with a piece of felt that is inserted into the drill chuck. Felt polishing is very effective, but you need to fix the material well enough, otherwise the fabric will pop out and cause you a lot of inconvenience.
And the third option is polishing polishing machine. Not every home has such a device, but the thing is quite useful and convenient. It will always come in handy for car enthusiasts for do-it-yourself polishing of plastic and headlights. And in the house you can always easily polish any object, spending only a few minutes on it. Therefore, if your budget allows and you are sure that this thing will come in handy for you, that is, you will have to polish it often, you should buy such a machine. You can find it at any power tool store.
Before final polishing, it is worth walking through plastic surface with a damp nozzle of the polishing machine, so you get rid of the remaining dirt and prepare the surface for the final step. On the final stage special pastes and a special foam rubber circle should be used. Polishing plastic. This process takes 2-3 minutes, so you are guaranteed to save time and effort.
After each type of polishing, it is worth covering the surface with a special polish for plastic. Using any of the devices, apply the polish to the plastic in a small layer and rub it well with a nozzle or cloth, and then walk over the surface with a tool. This little nuance will allow you to complete the process and consolidate the result. After all this, you will be satisfied with the result.
It is also worth remembering that if a plastic object is exposed to water, then the layer created by the paste and polish is washed out over time. Therefore, polish the plastic with your own hands as soon as you notice that the object has begun to fade. This will help keep the effect for a long time.
Like this, using simple fixtures, special tools and a little skill, you can give a second life to many plastic items. One has only to responsibly approach this issue and take into account all the necessary nuances. Polishing allows you to save sometimes quite a decent amount of money, and if you have time, even earn money. 'Cause now you know how to polish required item and you can do it not only for yourself, but also for others.
To easily eliminate scratches and scuffs on any plastic surface, you need to act as carefully as possible and follow the instructions for finished formulations because not all polishes are suitable for plastic. There are many ways to restore a damaged surface to its original ideal appearance. Some of them will only help to mask scratches, while others will get rid of them completely.
Show all
On sale there are a lot of different tools designed to repair damage to plastic surfaces. They can be found both in auto shops and in cellular communication stores. Choose a tool should be based on the nature of the damage:
It should be noted that for large scratches, colored pastes to match the surface are suitable, which allow masking the damage without a trace. Minor scratches can be eliminated with colorless compounds.
To polish small scratches, the following tools are suitable:
Before polishing, the surface should be degreased with alcohol. Polish with a cotton cloth until the scratches are gone.
To remove scratches from surfaces in the car, there are several methods:
The choice of a specific method depends on the severity of the damage and the characteristics of the affected surface.
First, thoroughly wash the surface with a detergent. After the plastic has dried, you need to turn on the hair dryer, setting the minimum power on it, and direct it to the problem area. If nothing happens to the surface, then the power of the apparatus must be increased so that the plastic begins to melt slightly.
As a result, the damage will either disappear completely or be significantly reduced and can be eliminated by polishing.
This method is suitable not only for car interior parts, but also for plastic parts moped and other products.
For polishing, you will need an abrasive paste designed for plastic.
Compounds designed for coatings are not suitable for this purpose.
To remove scratches from plastic, you should:
At the end, the plastic should be gently washed with a soft cloth.
This is the simplest and fast way elimination of scratches from plastic in the cabin and on the bumper of a car or plastic parts of a scooter. If a pencil is purchased for the restoration of colored plastic, it is necessary to choose its tone correctly.
Scratch removal algorithm:
If the plastic part is badly scratched and worn, you can resort to a major overhaul. To do this, the damaged panel must be removed from the car, washed and sanded with sandpaper (if the surface of the part is embossed, then it does not need to be sanded). Further:
If your phone screen is damaged, it's best not to risk trying to fix the display with home remedies. It is necessary to use special compositions for polishing displays. But they will not help to mask only minor scratches.
To remove scratches from the plastic parts of the phone, you can use toothpaste:
Another effective way- use a car polish: apply the product to a soft cloth and rub the plastic until the scratches disappear.
If your phone is seriously damaged, it is best to contact service center.
In some laptops, the lid is made of glossy plastic. Micro-scratches often appear on such a surface.
You can deal with them at home as follows:
This method cannot be used to process LCD screens. Polishing paste particles can damage the LCD matrix.
The following tools will help eliminate scratches on glasses:
These methods allow only to make the damage invisible, but not to remove them completely. You can finally get rid of minor defects only with the help of an abrasive for glass, which is used in painting. Due to the presence of hydrofluoric acid in the composition, this product completely eliminates scratches. With this treatment, the anti-reflective coating of the glasses is destroyed, but the lenses themselves are not damaged.
The abrasive is applied as follows:
As a result, the lenses will become perfectly smooth, and visibility will improve.
Surfaces of all kinds of plastics surround us. They are comfortable and practical, but prone to deformation. Therefore, the question of how to polish plastic from scratches is always relevant. In order for your favorite smartphone, window sill or TV to retain an attractive appearance, you need to familiarize yourself with our tips and, with the help of simple steps, turn them into almost their original appearance.
One only has to look around to see how indispensable plastic has become in Everyday life. It is made from: Appliances, means of communication, kitchenware, automotive parts, finishing materials.
This material is light and cheap, easy to use and unpretentious, and also resistant to temperature fluctuations. The only negative is the relatively low density, which is a consequence of the appearance of scuffs and scratches on it. Because of this, it is too expensive to change the entire product.
Getting started, it is necessary first of all to decide what we are actually going to do and what improvised means. Polishing is easy, you just need to know how. To begin with, it should be understood that jacks of all trades distinguish at least three different kind such actions:
Initially, we assess how great the damage is, and based on this, we choose a methodology for further work:
This method of machining a plastic surface is used when there are deep scratches that cannot be effectively removed by any other means. The material lends itself well to grinding, having low temperature melting. As a result of slow, careful work, we should get a uniform matte surface where there were deep scratches before. Here is the next range of actions:
We begin work using a skin that has a large texture. Grinding is a slow business, accuracy is required. We process the product in slow mode, monitor the temperature, it should not overheat. We methodically move from a large texture of skins to smaller ones. After using each of them, we wipe the treated area with a dry cloth, this allows us not to miss the remaining flaws.
There are several ways that removing scratches and scuffs will no longer be an impossible dream. At home, with the help of simple devices, you can make a shabby product perfect with your own hands.
If the plastic surface that your kitchen table, ceased to sparkle and became covered with scratches, then it will not be difficult to polish it to its original shine.
The same method will make window slope the same texture as it was a few years ago. A few hours of focused work will save you a lot of money.
After getting rid of scratches, it's time to move on to the next laborious process - polishing, which makes the old part almost new. Services involving the removal of scratches are widely provided by car dealerships and mobile phone dealers, as well as specialized cleaning companies.
They are not cheap, the same work is easy to do with your own hands. After all, special tools and devices that professionals use are sold in all car dealerships. The main thing when choosing a polishing paste: do not forget that we will process plastic; in order not to miss the choice, you should consult the seller, who will give professional advice.
If we are talking about a TV that has scratches or a phone that has major abrasions, then it is better to use special pastes. Let them cost more, but the effect will be desired.
We use a polishing machine, which in the most budgetary version consists of a drill with a special nozzle:
This material requires a thorough fixing so that it does not jump off.
Among the products purchased at a specialized store, do not forget about the polish. With it, the result of your work will be glossy plastic, no different from the one we purchased in the store. The technology of work is as follows:
Conclusion: to avoid frequent updates, protect household items from moisture.
This is a completely professional tool that allows you to bring the restoration of the product to the ideal process. Such a tool is useful and convenient. It is especially recommended for motorists who from time to time perfect the headlights of their car, as well as its plastic surfaces. The main convenience lies in the speed, in a few minutes the amount of work is done, which manually will take, perhaps, more than one hour.
The consideration that guides a person who acquires such a technique is the need from time to time to put things in order in his household. Such a polishing masterpiece is not so expensive, it is available in stores selling power tools.
A few nuances that should be observed in the process of using the tool:
The whole method takes a few minutes.
Video: how to polish plastic from scratches with a polishing machine?
One more pretty original method getting rid of scratches is to use the most ordinary hair dryer. The meaning of the method is simple: plastic reacts quickly to sudden temperature changes, so heat treatment is optimal way heal wounds on the surface of your phone.
Two types of tools are used for work: an ordinary hair dryer used for drying hair, and a special building unit.
In some cases, there is no need to purchase expensive products. As practice shows, such improvised means as ordinary toothpaste can serve as an abrasive for polishing the same headlights. Despite the low cost and extreme availability, the gloss of the surface, in the end, is no worse than when using a proprietary product from a specialized store.
How this tool works:
Obviously, using simple methods and a budgetary arsenal of funds, you can save a lot of money and get a truly brilliant result.
When polishing things like the cabinet of a TV or monitor, you should be very careful with the surface of the screen. Anti-reflective coating is a fragile thing and even a small scuff on the screen will look worse than a scratch on the case.
I think there are a lot of these ways. And then I stumbled upon this site, read how to get rid of scratches really effectively helps what the author described, there are simply no words, a solid five, the site is very useful for the home, I think this site will flourish well, I am very happy thanks to the author.
I liked the way of polishing with a hair dryer. Already tried it on my smartphone. Satisfied with the result. But in fact, there are not many plastic things in the house that are worth fiddling with.
Copying site materials is allowed
only after approval from the administration.
How to remove scratches from plastic, interests every person, I assure you! Every home, every family has a huge amount of plastic items that you use every day. Outer case refrigerators, household appliances, a mobile phone, even the interior and bumper of a car - all this is made of plastic. Therefore, today's article will be of interest to absolutely everyone - from housewives who are puzzling over how to restore their former shine to the refrigerator cover, to avid motorists who want to remove a scratch from the bumper with their own hands.
On the modern market There are many ways to remove scratches from plastic material, but they are only effective if the damage is not too deep. The most common of them:
Dear hostesses and their attentive husbands, you need to use these products strictly according to the instructions. These funds can be colorless and colored.
If the scratch is quite deep, then it is better to choose a color tool, since the depth will need to be filled with a suitable shade.
Remember that a deep scratch often looks lighter than the main background, so don't put off this "operation" until tomorrow. It is better to fill it in and paint over it in a timely manner.
And now helpful information for your husbands, and for you, of course, dear ladies, if you are happy owners of a car! Minor damage and scratches are most effectively removed with car body polishes. They may be:
So here it is for plastic used in everyday life, choose only finishing polishes so as not to further damage the restored surface.
Whichever remedy you choose, is applied to the damaged surface with a soft flannel cloth. An ordinary diaper is ideal for this mission.
And now I want to tell you about a little trick. Extreme craftsmen remove scratches with a lighter. “How is this possible?” you ask. And here's how: the flame of a lit lighter should be brought to the scratched area, but no closer than 5 - 8 mm, well, then very carefully and with jewelry precision lead the flame along the scratch. The plastic will melt a little and thereby tighten the scratch. If you managed to “sew up” the scratch in this way, then do not touch the plastic element for about 30 minutes: let it cool down thoroughly.
If the scratch proudly "flaunts" on the dashboard of an elite and expensive car, then it is better to contact the service for help, especially since many now have the "rubbing scratches" service.
You can even remove scratches from plastic in a car interior at home. Each driver cares about the appearance of the car interior no less than the serviceability of the engine. Therefore, for each owner or owner of a car, the following information will be very useful. Thanks to these methods, you can effectively remove a scratch from the plastic in the cabin and avoid replacing damaged elements.
Depending on how deep the scratches are and on what surface they appeared, there are the following ways to fix this problem:
For embossed surfaces, only the last two methods can be used, as others will only aggravate the situation and spoil the appearance of the plastic.
Well, dear motorists, let's go:
1. We remove scratches with a hair dryer. A well-known hair dryer can effectively rid the plastic of minor scratches. Moreover, you can use both a regular hair dryer and a building one. The algorithm of action is very simple: when the plastic is heated, small scratches and defects are tightened on their own due to slight melting.
In order to remove scratches from the torpedo, you must first wash the plastic thoroughly using detergents. This will rid the scratches of accumulated dirt and dust, and heat damage will heal faster. When the panel is dry, turn on the hair dryer on the lowest setting and aim at the area to be restored. If there is no change, you can increase the exposure temperature so that the plastic begins to melt a little. Keeping the hair dryer at one point is not recommended in order to avoid excessive heating of the plastic. If you do everything right, then the damage will heal right before your eyes or noticeably improve, and it will be easier to remove them in the future by polishing. Only after the plastic one has completely cooled down, it will be possible to touch it.
2. Remove damage by polishing. The safest and easy method to remove scratches in the car interior is polishing with special abrasive products.
Those pastes that are intended for paintwork surfaces should not be used: purchase only those that are designed specifically for soft plastic.
You can polish with a grinder, while making sure that the spindle is set at minimum speed. If this is not available, then polishing can be done by hand. It is so easy that even you gentle hostesses can do it.
Scratch removal occurs in the following sequence:
Tepe Use circular motions to clean off the remaining abrasive paste, periodically removing the resulting dust. Upon completion of the "plastic surgery" in the interior of your car, the plastic surface must be thoroughly washed, but you must act carefully and carefully so as not to create new damage and scratches.
3. We use a masking pencil. This is perhaps the fastest and easiest method of masking scratches in the cabin and on the bumper of a car. I cannot call this method budgetary, since high-quality pencils are quite expensive. But they are enough long time, so you can safely spend money once, especially since such a restoration in a car dealership will not cost less.
This pencil is filled special composition. With the right shade, the content of the pencil fills the scratch, and it simply becomes invisible.
Often the panel has a standard color of black or gray, so choose correct shade pencil will be much easier.
Removing scratches from plastic is as follows:
4. Overhaul and removing scratches from plastic. The most difficult and time-consuming method of restoring a plastic surface in a car is painting. But it is this method that will effectively hide all the flaws and defects. Moreover, thanks to this, you can change the interior of the car by changing the color of the panel. Therefore, even this time-consuming process has its advantages.
The first step is to remove the damaged part, because this is the only way you will not damage the upholstery and the integrity of the windows. plastic part removed in accordance with the instruction manual given by the manufacturer.
Now I suggest you, dear motorists, as well as their husbands, who will do all this, to consider in more detail all the stages of work:
Now, you know about all the tricks and methods that will help you effectively remove absolutely any scratches in the car interior, as well as from the bumper. From now on, when new scratches appear, you can easily decide what to use in this case: a corrective pencil or ask your beloved husband again to make a small “repair” and repaint the panel in a color that matches perfectly with your new coat.
It is not surprising that various defects appear on a mobile phone, since we use it every day, so now I will tell you 10 secrets that will help remove scratches from the plastic of your phone.
I want to immediately warn owners of expensive smartphones or tablets that to perform such experiments with the sensor is a risk, anyway! Therefore, I recommend that you carry out such manipulations only if you are confident in your abilities and dexterity.
Do not forget that before starting work, you should protect all the connectors of your gadget from moisture and other means that we will use for this.
So, dear readers, I propose to consider the main recommendations and secrets that will help remove scratches from the plastic and phone screen.
Used remedy |
How to apply? |
1. Tooth powder or paste |
To remove scratches from plastic cover phone, as well as some screens, you can use regular toothpaste. “How is this possible?”, you might think. But like this:
But if deeper damage has appeared on the phone, then this method will not work. |
2. Baking soda |
Ordinary soda, which is in the house of every housewife, will hide minor scratches:
|
3.Baby powder |
The algorithm of action and the method of preparing the product are similar to the case with soda. |
4. Any vegetable oil |
Many claim that oil can remove even the deepest scratches. But, based on personal experience, I can say that it fits this method for minor damage only.
This tool will hide small scratches only on a short time, it is rather a corrective "cosmetic" remedy. |
5. Car care products |
Any polish you use on your car can be used to remove scratches from phone plastic:
That's all! The principle of operation is similar to the previously proposed means. |
6. Furniture polish |
Even furniture polish can be used to remove scratches from the plastic and screen of your phone. To do this, apply a small amount of product to a cotton pad and rub the area to be restored until the scratch disappears from sight. |
7.Sandpaper |
No matter how strange and terrifying it may sound, many experimenters claim that it is sandpaper with the least amount of rough coating, it is able to remove small scratches from plastic and even a touch screen. If you can't believe it, then it's best not to try this method on your phone. |
8. Pasta GOI |
Back in the days of our grandmothers, GOI paste was often used for polishing various surfaces. This product contains a small amount of abrasives and is used to polish ceramics, optical glasses and, as shown modern experience, for plastic and touch screens. But lay big hopes it is not worth it for this tool, because it is able to remove small scratches and then not for a long time. |
9.Display polishing products |
Like it or not, but a specially designed composition of such products perfectly copes with the problem of scratches on the screen and plastic of mobile phones and other gadgets. Such products, of course, will not remove a deep scratch, but they will perfectly hide minor defects. |
10. Suede |
On the Internet, you can find the statement that a piece of suede can permanently remove scratches from your phone! But this material, like all steel, can only hide minor damage, but nothing more. |
I want to summarize that all these tools can really effectively cope with minor defects and remove scratches from the plastic of your phone. But they can't deal with deep damage. Therefore, I would like to give you advice, dear readers: if significant damage has appeared on your phone, it would be better to contact a service center. Well, you can mask minor defects while you are planning to go there, using these means. Good luck and be as careful as possible!
Minor defects can be removed using the following improvised means:
If your glasses have an anti-reflective coating, then be prepared to part with it using an abrasive. When using this product, the acid will remove any coating, but plastic lenses will remain intact:
Despite the fact that the anti-reflective coating has disappeared from your glasses, now there is not a single scratch on them, and their visibility has improved significantly!
Now that's all! All the tips and tricks that I knew, I told you everything. Now you are a real pro in the field of removing scratches from any type of plastic and from any thing! With today such an unpleasant problem as scratches on plastic will disappear from your life forever! And you will enjoy the bright moments with a smile, looking through the updated lenses of the glasses and driving your "restored" car.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom