Usually there is no time to bring beauty to the site - the forces are leaving. But the owners, sparing no time, make their site beautiful and comfortable. They can become a decor option, because when going to the dacha, they take a lot of containers with water, with juice, and accumulate a lot of it over the summer. You should not collect everything in coolies and take it to a landfill - this is a great material with which you decorate the site, unusual and beautiful things are made.
An example of the original path to the house from corks from plastic bottles
Just turn on your fantasy and imagination. Below are step-by-step instructions, using which it is easy to create an unusual art object on the site. You will need a little:
Some people think that there is nothing difficult in arranging a path from corks from plastic containers, since it is easy to work with waste material - this is not so. If you want to surprise your neighbors and please your loved ones with the beauty of your work, then you need to follow the basic rules in the arrangement. And they concern in most cases, and preparation for work.
Bottle cap path in the gardenIt is worth noting that plastic is an ideal material for walkways, as well, since its decomposition time is 100 years. The color range of the plugs is very large. In addition, they do not lose their external data for a long time, but even if traffic jams fade in the sun, it is enough just to paint them in the desired color.
Required material to create a track:
The requirement for the material when arranging the track, there should be a lot of it, you need to lay it tightly. The biggest load falls on the tracks. Without laying the material tightly, it will quickly fail, and it will be a pity for the wasted effort.
A variant of the construction of a track made of concrete plugsRead also
Children's country houses from pallets
It turns out a very large figure, which no family can overpower the collection, even if you use a lot of liquid. Where to get material:
There are inscriptions on the corks, they are completely unnecessary - the corks are soaked and washed thoroughly. Inscriptions that are not washed off with water must be removed with a solvent.
There are several options for laying corks:
The latter option is applicable in closed places, when precipitation occurs in traffic jams, water and dirt accumulate. Yes, and it is very difficult to care for such a coating.
From this moment, creativity begins. Before you pave the path, you need to decide on the pattern that you lay out on it. You can make a scatter of colors by laying out corks in rows, the result will be a colored spotted path of plastic corks - which will attract attention with its multi-colored highlights. If you are an extraordinary person, then you can create your own ornament. You can use any patterns for embroidery.
A traffic jam track with even geometric shapes will look good - this option is easy to perform, it is enough to make the markup correctly. There are areas where summer residents created real works of art with their own hands. You can safely experiment, and with the involvement of all family members. You will do several useful things:
Often, during such a fun game with children, real masterpieces are obtained.
This stage must be approached with all responsibility, despite the fact that the material is inexpensive. The process requires a lot of patience, so you need to make sure that the traffic jam path has served you for many years. Plastic corks as a garden path
Important! It is worth thinking about making a garden path in the country, as it will decorate the site.
Many people prefer to make garden paths out of plastic corks, but it is worth noting that these paths become slippery in winter. I would like to give advice, do not use this material for the paths that you walk on in the winter. Use them only for paths between beds where you do not walk in winter.
Where else can your imagination unfold, if not in the country. Here, in all its glory, the abilities of a housewife are manifested. In addition, often this does not require large investments. There is so much material around that is practically thrown out into the street. Empty bottles and corks from them are firmly in the first positions here. Decorations for giving are not only beautiful, but also very cheap.
And how much joy they can bring to children and adults. A plastic bottle goes into business 100%. From the covers you get beautiful panels on the wall of the house. You can make original paths from corks from plastic bottles in the garden or lay out a beautiful area near the house. You can organize a sports corner for the child, where he will not only play, but also receive a charge of vivacity. Covers can be used to build an obstacle course. It is better to lay them with the smooth side down, leaving the ribs on top. In this option, a good massage for children's legs is obtained. Paths from corks from plastic bottles turn out to be very beautiful if you make a pattern, choosing harmonious color combinations.
True, there is one condition. There should be a lot of prepared material, and it’s difficult to cope with this problem alone. You need to connect friends and acquaintances to collect the right amount. It may take several years to collect the material. But on the other hand, how nice it will be to warm the soul with your own hands. A photo taken in a warm season will allow you to remember a pleasant trifle even in winter. It takes a long time to collect corks, because their sizes are small, so you can come up with another option. For example, make paths from plastic bottles. There are several technologies that can be used. If you want to use the whole bottle, then it is better to make a border out of them, thus determining the shape of the path. For this purpose, we dig a shallow narrow groove on the sides of the track. In it, with the neck down, we tightly lay the bottles along the entire route. Then we return the earth to its place and tamp everything around. If the land in your country house is good, then you can stop at this stage.
If clay predominates, then it is better to make the inside of the path out of corks from plastic bottles. Or combine all parts of the bottles. The tropics created from plastic bottoms look very nice on the site. To do this, cut off the bottom of the bottle by 1/5 of its height. Leave the top for blanks that can be used to create a plastic palm tree. In order for the paths from corks or from the bottoms of the bottle to keep their shape well, it is advisable to prepare the base. If you follow all the recommendations, then first you need to pour crushed stone, compact it well and pour coarse sand on top. Having created a dense pillow, you can lay out a pattern of a track from corks from plastic bottles. This, of course, is a very laborious process, but what a beautiful site it turns out. If you want to make a more durable coating, then it is better to lay the corks on a prepared concrete base. But this must be done quickly, until the cement has seized. You can also use metal plugs. They also fit well and can serve as decoration.
If desired, the tracks can be made with your own hands, and such an unusual material as corks from plastic bottles is suitable for this. Turn on your imagination and, using the tips, create a unique and practical art object in your country house. And you need quite a bit for this: diligence, free time and our advice.
When it comes to waste material, many believe that it is much easier to work with it with construction material. This is not entirely true. If you want the garden path to become not only a practical element of landscape design, but also its calling card, you need to follow some rules. They primarily concern the choice of material and its preparation.
They say that plastic decomposes after 100 years. It's wonderful! Indeed, in this case, it is ideal for garden paths (for the garden). The palette of plastic covers is quite extensive.
To create beauty, you can use:
The main requirement for plastic lids is high density. After all, the tracks have a serious load. And it will be a pity for the spent effort if the coating does not last long.
For the track you will need a lot of this material. You can do the calculation yourself:
One family cannot handle such a number of drinks, even if you collect all the caps from bottles and cans, including water, beer, yoghurts and even medicines. Connect everyone you can to the project:
Corks can be laid in different ways:
The latter option is only suitable for small areas under a canopy. Otherwise, during precipitation, water and dirt will accumulate in the recesses of the plugs. And such an uneven surface is hard to care for.
He will acquaint you with varieties of crafts from tin cans.
This is the most creative part of the job. Before you start paving directly, you need to decide exactly how your path should look. You can lay out the covers in even rows, regardless of color. As a result, you will get a multi-colored scattering of colored highlights in your garden. Such a path attracts the eye and looks impressive.
But if you want something more extraordinary, choose a pattern for your track yourself. Cross stitch patterns will help you with this. Tracks with colored geometric patterns look good. If you are confident in your abilities, you can choose drawings more difficult. Some summer residents create real plot panels under their feet in their garden. It is in the country that such decorations are popular.
Despite the cheapness of the material, the approach to creating paths from traffic jams must be serious. Sometimes it is advised to simply level the ground before laying the cork mosaic and start creating by sticking the caps directly into the ground or a layer of sand.
This carpet will not last long. Not only will the covers not hold out for a long time and will begin to fly out one after another, but also the grass will hasten to sprout between them. It is better to spend more time, but do everything soundly.
You will need:
For the construction of the track you need:
The mortar hardens quickly, especially in hot weather, and laying mosaics is time consuming. Do not fill the entire track with cement. Work in sectors. Break your drawing into parts or conditional squares and fill in small areas.
But such tracks are not ideal, they have serious drawbacks. But knowing in advance what difficulties can arise with them, you can easily avoid them.
Coatings from combinations of plastic covers with broken ceramic tiles look good. The small size of the elements allows you to lay out bizarre and extraordinary patterns. The result is a distinctive path of bright elements. Such a garden patchwork will decorate the garden and place accents on the site.
Drawings can also be varied with metal covers. And adherents of eco-design will like paths made of wine corks. Cork wood is a noble material with unique properties.
Homemade massage paths in the garden have become quite popular. They are loved by children and adults. After all, walking barefoot on a textured surface is not only pleasant, but also useful. For such paths, you will need a cement base on which different materials are laid.
Lids from juices, glass jars, corks, buttons, sticks are suitable. All this stuff is sorted by color and size. Then a sketch is developed. Here you can play not only with color and texture, but also with the way of laying. Covers laid on the end will create a convex surface, and glued with a notch down will give a smoother plane.
This material can serve as a wonderful material not only for manufacturing, but also for arranging exclusive paths in the garden. For this, whole bottles or their parts are used.
Empty bottles do not withstand serious loads. Therefore, before building a path, they need to be filled with sand, fine gravel or dry soil. If you want to make a color path, then put colored paper, foil or pour a little dye inside the bottle, and only then fill in the sand. When the material is ready, start laying it.
In this case, you can not do without a cement cushion. Only the hole for it needs to be dug deeper - by 1.5 bayonet spades.
You can make interesting paths from the bottom of the bottle. To do this, prepare a trench about 15 cm deep.
From the remains of bottles, you can build interesting garden sculptures or greenhouses for seedlings.
Greenhouse for seedlings from a plastic bottle.
How to lay paving slabs is described.
The technology is largely similar to the previous one. Only glass bottles do not have to be filled with sand, although the sand will give them extra strength. It is better to take bottles of champagne or wine, but beer ones are also suitable.
They are usually installed upside down. For such a path, a fairly deep trench is needed. Therefore, lane bottles are often cut and only the bottom is used. The laying technology is the same as that of plastic.
The backlit track looks great. To do this, you need to mount small bulbs under the bottles. It is better to take LEDs - they are durable and economical. Bottles are also suitable for building walls, fences and borders.
On the video: do-it-yourself traffic jam paths.
Ordinary caps are a cheap and practical material. They are well suited for paving paths of varying degrees of sinuosity. Surfaces decorated in this way look cozy and colorful. And so that they do not stand out from the general style of the site, complement the garden with bright mosaic sculptures and panels in the same color scheme.
Lids from soft drinks - this is an excellent raw material for the manufacture paths in the garden. A variety of colors allows you to make various ornaments and patterns from them.
Of course, the creation of such a coating is a long and painstaking process. The diameter of one cork is three centimeters. In order to pave one square meter of the path, you will need a little more than a thousand caps from plastic bottles.
But such a coating has undeniable advantages. Cheap raw materials can significantly save on the decorative design of your site. A simple and convenient method of mounting individual fragments does not require laborious earthworks. For laying individual elements, you do not need to have special skills in construction.
Where can I get bottle caps in such quantities and how to find enough time to make them? These are the two main problems that summer residents will face who have chosen this design method for the improvement of their paths.
There are several methods for collecting the necessary materials. Firstly, there is no need to wait for the moment when the required volume of traffic jams is collected. Lids can be found in large numbers on the banks of nearby rivers and lakes. You can also ask close relatives and friends not to throw away corks from empty plastic bottles.
In the interval between summer seasons, there is enough free time to assemble fragments of the future track.
Fragment making and laying
First of all, it is necessary to mark the future paths and calculate the area that needs to be paved. Then you need to approximately come up with a general composition for the future design of the paths and outline the layout of the ornament elements.
Variants of the parts that make up the composition can be the simplest geometric shapes made up of old covers, such as circles, squares, rhombuses and triangles. More complex drawings are concentric circles and various variants of crosses. Figures of animals cut out of cardboard will also serve as good templates for the future design of paths.
Tools and materials needed to make fragments.
1. An awl with a wooden handle or an electric drill.
3. Fishing line with a diameter of three to four millimeters.
4. A great desire to create something with your own hands.
Using an electric drill or an awl (the tip of the awl must be heated to make it easier to pierce the material), make the holes marked in the side walls. Connect the lids together with a needle and fishing line. No need to try to connect a large number of caps at once. It is better to collect individual elements, and then combine them into the desired shape.
I am glad that humanity is gradually learning to reuse waste.
If earlier these were only modest attempts, now people will think several times before sending them to the garbage container.
You can reuse not only transparent, but also the cover. About them today and will be discussed. More specifically, how can apply multi-colored caps in daily life, how to make of them:
Recycling plastic caps- a relatively young direction, which is only gaining momentum. In large shopping centers you can see special containers for collecting multi-colored plastic.
It is clear that a resident of a small town is unlikely to take a bag with lids to the capital to throw them in a specially designated place. But sending them to a landfill is also not worth it - you can give them second life.
Colored, white, large and small - almost all bottle caps are suitable for creating country crafts.
The main thing is to let your imagination run wild.
Can connect to collection their covers relatives and friends.
This material can be used in a variety of ways, and for this it needs quite a lot.
Coasters for glasses and hot dishes, children's toys and rattles, country rugs and seats, lampshades for lamps and curtains, garden furniture - and this is only a small fraction of what can be made from plastic bottle caps. Next we Let's take a look at some tutorials which can be your source of inspiration.
The garden path on the plot will become brighter and more fun if you lay it out with colorful corks. Why buy crushed stone and gravel when you can use the waste for free? Also, this way you can save the environment from pollution.
To get started, you need mark the territory, install the sides and fill the base with solid material so that the plugs do not fall into the ground. Now only remains lay out track - you can do it in a chaotic manner, or you can gradient or pattern, as in the photo below, the result is an unusual solution for landscape design.
Looks good garden path from the covers in the form of a rainbow also a great option for brook imitations.
let's consider step by step process creating a garden path:
Now you can lay out colorful plugs. In order for the path to have a finished look, it is necessary to install a curb. Plastic covers can be laid out on top of green spaces.
We talked about how to make a garden path out of tires.
Here we will talk about a massage mat that will be useful for all family members. One evening is enough for you to create an unusual decoration for your home, which will also be good for your health. A little patience and care - and an unusual massager is ready.
It can be use for foot massage at the end of the working day, as a massage therapist for a tired back, as well as for rehabilitation after operations.
You can make it in any form, or you can think over the shape, size and even the design of the product in advance.
Here's what you'll need:
First of all, it is necessary make holes in lids On the sides- it is best to do this according to the principle of the cross.
Now imagine what your rug will look like.
Lay out a pattern on the floor and fix it in any way (draw or photograph).
Laid out plug the plugs with a snake on the fishing line according to the drawing, row by row.
The result should be a long "snake". Then select the covers of the first row and put them on the fishing line in others - located opposite.
So, having collected the first row, proceed to the collection of the second and then a third. It remains only to tighten the ends and securely fasten them. You can use the above diagram, or you can try to draw up an original drawing yourself.
It should be said right away that for the covers of this material you need not just a lot, but a lot. It is almost impossible to collect such a quantity on your own, given that parts must be the same size.
It is also worth deciding on the color in advance - you can collect caps of the same shade, or you can cover them with the desired color.
And there is also lots of options:
As soon as there are enough covers, it is necessary to sort and drill holes in each of them with a thickness corresponding to the size of the fishing line. The same holes are made in the frame of the fence.
Once you have decided on a pattern or ornament, you need to weave the fence section. For these purposes, suitable wire from. And for fence frames, you can use steel strips, corners and pipes.
Now you should arrange the covers in accordance with the pattern on plywood or cardboard, after which transfer the image to the frame fence. Further, only string lids and fix them.
In any case, such a fence will definitely not go unnoticed. fasten caps should with wire or string. Nails are not the best option, as they will not allow you to fit the covers to each other.
In a private house or a gazebo on a personal plot, you can do unusual curtains from multi-colored corks. They will perfectly emphasize the interior in Provence style, as well as create a cheerful mood.
These curtains are very easy to make. The main thing is to choose the right palette in accordance with your interior.
Or how about new light, comfortable, compact and mobile garden furniture? Craftsmen make from covers original and creative chairs, as well as unusually decorate tables.
Also, don't rush to throw away corks if you have small children. This is great entertainment for kids that develops fine motor skills, and also forms color perception.
Invite your little one to sort the corks by color - you will be surprised how much this activity will captivate the child.
You can also assemble a frame from wooden slats in the shape of a flower or a funny animal and fill it with colored corks from PET bottles - you will get an unusual decoration for your backyard, which will certainly attract the attention of everyone around you.
If you prefer bright colors and unusual design solutions, pay attention to the fact that lids make unusual and original lampshades.
Making such an element with your own hands is quite simple. The main thing is to design a frame and choose covers of the desired shade.
Practicality, convenience and functionality are the main criteria that the design of a country house must meet. Surely, somewhere in your shed an old kitchen sofa is gathering dust, which is a pity to throw away, and it is difficult to make something worthwhile out of it. Try making plastic caps fun rug that brings old furniture back to life.
Also from bright plastic covers you can make unusual pots or . It is enough just to glue the base with colored corks.
The video shows a lot of ideas brought to life on creating a variety of beautiful and useful crafts from plastic covers for a house, a summer residence, a personal plot:
To all that has been said, it remains only to add that the lids are not waste and not. It is a versatile material that can be reuse, creating unusual and useful things while protecting nature from pollution. These colorful caps can be used to create baby toys and rattles, garden furniture and interior decoration.
After reading this article, you have learned how to use PET bottle caps for the garden and summer cottages, making a variety of handicrafts and decorations out of them.
In contact with
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom