We remove scratches from the plastic surface. How to remove scratches from plastic things

Restoring scratched glass is as easy as shelling pears, if you apply toothpaste and put in some effort. The only question is whether it should be restored or better replaced. Not only does the glass repair product create a rainbow effect on the glass, but scratches reduce the strength of the window, making it vulnerable to cracking with just light pressure in the right place.

And without that, it is upsetting that you can find a scratch on the glass with your fingernail, it is probably also so deep that it will be impossible to fix it without a trace. Polishing kits can leave an indentation with bubbles that refract light when the sun shines through the window. Depending on where the window is located, this may be a problem for you. If the scratch is right in the center of your front bay window, it will usually need to be replaced.

Working with small scratches

For scratches that can be seen in the sun but cannot be felt with a fingernail, toothpaste The best decision Problems.

Toothpaste is the best solution for glass scratches

A paste or cream works much better than a gel in this case. Clean the glass thoroughly. It is best to clean the surface with a lint-free cloth. Smear enough toothpaste along the entire length of the scratch and wipe off any excess.

If you use a razor blade to scrape off excess toothpaste, you're doing yourself (and your window) a favor.

Move in only one direction. Scraping the glass back and forth, across the glass can cause irreparable damage!

After the window is dry, take a piece of soft cloth and polish your window. The scratch will immediately disappear, along with the toothpaste. Sometimes, you get scratches that are barely noticeable, but still they bother you. Don't rush to use the paste. First, try polishing the glass with furniture polish. Just be careful to avoid scratchy materials such as newspaper while polishing. The best choice for you it is a soft, dry fabric.

Medium scratches

Most window cleaning professionals will tell you that scratches on your window do not need to be repaired at all. But if you run your finger over the scratch and your nail falls into the groove, that means the window is too damaged to repair. And yet, for those persistent jack-of-all-trades, there Possible Solution. The second treatment with toothpaste containing dry mustard and vinegar in equal parts and this mixture can fix scratches that are a little deeper. Apply toothpaste and polish with a clean cloth. If your scratch is still visible after sanding, it's time to move on to the next step - a professional scratch removal system.

professional methods

Some scratch removal kits are sold both online and in a brick and mortar store. Auto glass restoration kits usually include everything you need to get the job done. Unfortunately, they can be quite expensive, and without professional knowledge, You may not be able to put them to good use. Look for products that do not contain abrasive ingredients. Cerium oxide and those that only scrape out scratches. The end effect is a reduction in the strength of your window. Homeowners and their insurers will agree that it is better to replace a window right away than to wait until it breaks.

Scratch Prevention

Undoubtedly the most easy way to take care of a scratch is, first of all, to hide its presence.

Not all scratches can be repaired, but some common causes of window scratches can be avoided, as listed below:

• Traces of construction - building mixture, putty and plaster, adhere to the surface of a new window and, when they are scraped off, form scratches. Some new products protect the surface of the window. They can be applied or sprayed onto the glass at the factory, such films can be removed after construction is completed, and then the window simply needs to be washed.
• Newspaper, hard towels and intensive cleaning can scratch the surface of the glass. Surprisingly, the same can be done with a diamond ring. Clean the window with a soft, clean cloth. If fibers or streaks remain on the surface, use a lint-free towel and avoid wiping windows when the sun is shining on them.
• Dirt or construction dust can very easily scratch the window when you wash it. If possible, rinse first, or use a hose to wash the dust off the window before washing it.

Windows create the overall impression by which your home is judged. Stained, cloudy, dirty or scratched windows give the wrong impression. Correct the feeling of abandonment and upgrade your home by restoring or replacing damaged glass windows.

As you progress in woodworking, you will find that there are some important differences between woodworking and joinery tools. But while you're still learning the basic skills, you can use the same tools as a carpenter. They are readily available and cheaper, so you can start working with wood without high costs on the…

Family: Rubiaceae Trade name: Bahia. Other names: subaha (Ghana); Elol (Gabon); Elilom (Cameroon). Distribution: Tropical West Africa. Abura wood description Pale orange brown or pink color tree. The heartwood of the tree is reddish brown, sometimes spongy, with darker veins. Mostly straight, with grain, but sometimes with a spiral grain. The texture is pronounced. Weight varies from 460-690 kg/m3…

Everyone in the apartment has a lot of plastic things, often for daily use. For example, it can be a refrigerator, kettles, blenders and other items. household appliances, phone case, as well as car showrooms. Due to the fact that these things are used quite often, scratches appear on the plastic from prolonged use, sometimes deep. But don't worry, there are some tips on how to remove scratches from plastic effectively and affordably.

Today you can find a large number of products that will help eliminate scratches and microcracks on the surface of objects made of plastic. The most common is considered to be such means as a polish that removes damaged areas on plastic; special pencil; crack-filling paste. However, they only work when the scratches are not deep.

You can fix small cracks yourself using polishes designed for car bodywork. The polish can be rough (that is, its texture has an abrasive property), as well as finishing (in this case, the texture is quite soft and silicone). For household plastic items, it is best to choose only a finishing polish so as not to cause even more damage to the coating that you want to restore.

How to remove scratches in the car interior?

You can fix scratches on the plastic inside the interior of your car yourself. The choice of tools depends on the degree of damage and the type of coating, including a hairdryer, polish, pencil, and if none of the proposed options help, then overhaul details.

hair dryer

You can perform the following steps with both an ordinary hair dryer and a construction hair dryer. During this procedure, the plastic will heat up, and the damage will heal by itself, due to the fact that they will melt somewhat.

1. Before starting work, wash the part well with detergents.
2. When it dries, you should turn on the hair dryer (it is recommended to use the minimum power), and then direct it to the problem area that needs restoration.
3. In case you don't notice any change, turn up the power so that the heat melts the plastic surface a little.
4. Never keep the tool in one place because you risk overheating the plastic.

Note! You can touch the restored part with your hands only after it has completely cooled down.

Polishing

1. Wear rubber gloves and wash everything with detergent. Places where dirt and dust have accumulated require special attention.
2. Then you need to dry the area you are interested in.
3. Next, you need to apply a paste with abrasive properties to microcracks using a small foam sponge. Be careful! For the best effect of the polish, wait a little while, which is usually indicated in the instructions for use.
4. Wait until the polish becomes white color, and start the polishing procedure.
5. Moving in a circle, it is necessary to clean off excess abrasive, from time to time removing the resulting amount of dust.
6. Wash the cover afterwards.

Camouflage pencils

This method is the fastest and easiest to eliminate cracks inside the cabin, as well as those that can be found on the bumper of the car. Pencil High Quality usually has high cost, but it is quite economical and effective remedy. In order to carry out the procedure, you need to perform the following steps:

1. Remove dirt from problem areas and dry.
2. Use the tip of a pencil to fill in the damage.
3. Wait for the surface to dry.
4. You can then remove any remaining product and start polishing. This should smooth out the transitions of the restored area and the rest of the coating.

Major interior renovation

Painting is the most complex and time-consuming way to restore such surfaces. However, this option will definitely be effective and help to hide the existing shortcomings.

1. The element requiring restoration must be thoroughly washed and dirt removed with detergents.
2. Next, you must sand the damaged area, however, if the panel is embossed in its structure, then this step should be skipped.
3. If it is smooth, you can start sanding with special equipment or improvised means (often used sandpaper).
4. Then a special primer is applied to the prepared coating, which is produced in the form of spray cans. It is necessary to choose a composition that will not react with the surface.
5. After you have applied several layers of primer, the plastic needs to be polished with an abrasive until it is perfectly smooth.
6. In the case when the panels have large cracks, you need to fill them with putty.
7. When you're done repair work, the coating should be coated with an appropriate paint.
8. If necessary, plastic panels are also processed with varnish, however, it can cause glare, which sometimes interferes with driving.

cracks small size removed using the following tools:

• Abrasive polishing products glass surfaces. Such products are also often used by artists, and they are the only way to eliminate all scratches, not mask them. Among the ingredients that make up such abrasives can be found hydrofluoric acid, so never use them on parts that are not made of plastic.
• Means for washing glasses. If you want to remove a scratch on a plastic item, use a glass cleaner, for example in a car. It should be applied to the coating and polished with dry wipes. This option will help get rid of small cracks.
• Wax. Wax is suitable for efficient polishing of plastic surfaces. It is enough to apply a little product on a piece of dry soft cloth and rub the plastic, moving in a circle. Remove excess with dry wipes or a cotton swab.
• In addition, sometimes use a polish intended for processing wooden products mixed with vaseline. You need to buy at the appropriate point of sale products that polish the tree, and treat the problem area with it, mixing the product with a few drops of petroleum jelly. This product fills the damaged area and makes it not so noticeable. Polishing must be continued until the vaseline is completely wiped off.
• Also, you can use the tools for computer equipment, which are most often treated with discs, because in this way you can remove worn areas and small microcracks. Apply the product to the plastic coating using a soft fiber.
• Polishes for silver and copper will help you, which should be applied to the problem area and wiped with dry wipes or a piece of fiber cloth. This process should continue until the moment when you do not get rid of all the cracks.

Lyokha, I would like to touch your window with you, I think you would not have answered Daria on this "problem".

Incorrect and inappropriate position.

Give me any window, and I will prove that it does not correspond to something - with our regulatory framework, you won’t even have to strain yourself for this. But this does not mean that all windows are bad. It's just that the quality of Lyokha's windows and the quality of any other windows have nothing to do with this topic and cannot have (whatever it is). After all, we are talking about aesthetics, about beauty, and each person has his own, subjective sense of beauty, and it cannot be substantiated or disputed by any examples. What one likes or dislikes should not at all like or dislike another. I think so. Sure.

Now to the point:

Window brought...

There are three threads on this forum:

and current.

From this I conclude that, quite possibly, we are dealing with a "syndrome of one window". This is not at all an offensive label, as it may seem, but a simple, repeatedly verified observation - very often a person who buys 10-20-50 windows refers to different kind minor issues before and to minor defects eliminated after the purchase is much calmer than a person buying one window. In a tree, I periodically encounter this effect, and I perceive it as completely natural, quite humanly understandable. And I always take into account that the buyer of one window is so worried and worried at all stages of the purchase that he is often inclined to bring himself almost to a nervous breakdown due to sheer nonsense or, in general, out of the blue. Therefore, before drawing any conclusions, I try to carefully check any information from such a buyer for his own good and reassurance - suddenly, being worried, he inadvertently confused something.

This is where I would like to clarify:

Started washing and saw scratches!!!

- as I understand it, you started washing uninstalled windows; and who and when unpacked them and removed the protective film from them?

I don’t like them at all, there are almost all (I don’t know how to put it) non-removable outer glazing beads. Visible to the naked eye. How to proceed?

- Do I understand correctly that you want to decide whether to contact the company with a claim or not? Or do you need some other advice? Tell me please.

How to understand - the rubber bands will be corrected? They are from all angles, as if they do not reach.

- as I understand it, at the time of this comment of yours, the window has been with you for the third day; Why hasn't it been installed yet? did you forbid the installation, or were there some other reasons? is it installed now or not?

Let's clarify these little things, and then, I hope, it will be easier for us to find the right solution.

Edited August 18, 2015 by Antipov

Plastic in modern world surrounds us everywhere, whether it be car panels, window sills, Sunglasses or mobile phone. Distribution is due to the fact that it is light in weight and easy to handle. Nevertheless, it is prone to damage, so sooner or later the question arises of how to remove scratches from plastic on one thing or another.

Most often, damage can appear on car parts, for example, a dashboard or doors, this may be due to the careless location of keys, phones and other items on it. In addition, it is quite easy to scratch glasses that have a plastic base when they are casually placed on a table or in a bag.

How to remove scratches from glossy plastic at home

To remove scratches on plastic, use one of the following quick methods:

• Apply a few drops to the damaged area machine oil, then carefully polish it with a flannel cloth. It is worth noting that the plastic should not be painted, otherwise this type of polishing is unlikely to give meaningful results.
• An indispensable tool in every household is GOI paste, it can also help in solving this problem. It is enough to apply it to the fabric and carefully rub the substance and the plastic base.

GOI paste copes with almost all scratches on plastic surfaces.

• Good results are obtained by using special felt-tip pens that can mask a scratch on a painted surface; in addition, textile paint can be used for this purpose. In conclusion, treatment of the damaged area with a paste containing wax is required.
• There is a special dye in hardware stores that removes scratches on a glossy surface. It is applied to the right place with a thin brush or toothpick, and after drying, polished with a cloth dipped in machine oil.

If it was not possible to remove the scratch, apply other methods:

Heating with a hair dryer. Pretty simple solution to the problem hot air quickly levels the plastic surface and eliminates the smallest defects. Removing scratches is as follows:

• remove debris and dirt from the processed part of the plastic;
• clean up with sandpaper with a not too large cell;
• remove dust with a damp cloth and degrease the surface;
• then heat the plastic by pointing the included hair dryer at it to a temperature of 300 degrees;
• it is important to move the device in the direction of the scratch, not lingering in one place, in order to prevent streaks from appearing;
• when the surface is hot, leave it alone for 15-20 minutes;
• in conclusion, a primer and painting of the plastic element is required.

Polishing with a special product that can be purchased at an auto supply store.

• First, clean the areas where the scratch is located with a soapy solution.
• Dry the element.
• Apply the paste with a sponge and leave to act for the period indicated in the attached instructions.
• Waiting for the paste to get light shade, proceed directly to polishing. May be used as special device, and ordinary sandpaper;
• Shake off the dust from the surface, evaluate the result of the work.

Pencils used to paint over scratches on a plastic surface are able to fill in the damage and make it invisible to the eye:

• first, carefully select the shade of the pencil so that the scratch becomes truly invisible;
• then wash the plastic and dry it;
• now shade the scratch with a pencil, and after drying, remove its excess and polish the surface.

How to remove deep scratches on plastic

To remove deep scratches on plastic that completely spoil appearance any thing:

• melt a small piece of plastic that will be exactly the same as the area being repaired;
• dissolve it in White Spirit;
• now that the substance has taken liquid form, rub it into the crack;
• finally polish the surface.

Special tools hide deep scratches.

Remove large damage plastic base possible by applying special remedy Displex, which is sold in hardware stores, packaged in tubes. It is worth noting that this substance contains microparticles of a plastic nature, so they fill deep scratches in the most accurate way and make them invisible to others.

You need to use this tool as follows:

• apply the paste to the scratch using a cotton pad, flannel or other cloth;
• you need to rub the product, making circular movements, for 2 minutes;
• in the case when the scratch has not disappeared after one procedure, repeat the manipulations several more times.

As a rule, Displex does an excellent job with deep damage, but in the case when all the effects were ineffective, it makes sense to turn to specialists. For example, if the scratch is in the interior of a car, take advantage of the special damage removal service that most car washes offer.

How to remove scratches on a plastic window sill

COSMOFEN 10 perfectly restores the gloss of a glossy plastic surface.

A plastic window sill, of course, is superior in many ways to its wooden counterparts, but scratching it is easy. It is not uncommon for damage to be left awkwardly moved flower pot or the hostess who cleans it with a stiff-bristled brush. It is worth noting that scratches can become a source of additional dirt that will get into them, and removing it will not be too easy.

Of course, ideal option will be a complete replacement of the window sill with a new one. But if this method does not work, try to repair the damage yourself:

Using sandpaper, you can remove all the bumps from the windowsill.

• if it is supposed to treat small scratches, then this remedy can be applied immediately to them;
• in the case when removal is required for deep damage, their surface must first be cleaned with sandpaper.

It should be noted that the wax coating gives excellent results because it tolerates the sun's rays and water perfectly. And also has the ability to repel dirt, protecting the surface of the window sill.

How to remove scratches from transparent plastic

Transparent plastic is prone to scratches no less than matte or colored. As a rule, there may be many objects in the house that have a surface made of such plastic. Quite often, plastic lenses of glasses, most often sun glasses, are scratched. It should be noted that such damage can impair vision, and simply make their use uncomfortable.

Small scratches on transparent plastic are removed using improvised means:

• polish for jewelry. Apply to glass, then buff with a microfiber cloth.
• If you mix petroleum jelly and a wood polish, you can remove scratches on a transparent surface. It is important to continue polishing until all traces of Vaseline are completely gone.
• A mass that removes scratches from computer disks works well, it is applied to the surface of the glasses with a microfiber cloth.
• Glass cleaner and abrasive for them do a good job with this kind of damage. In addition, they are great to help solve the problem of fogging.

Removing scratches from plastic surfaces is a task that every person faces sooner or later, because objects made of this material fill every home and surrounding space. It is worth emphasizing that the removal of minor damage is quite realistic at home, and deeper ones are best removed using professional tools or expert help.

Compared to conventional wooden windows plastic ones have some advantages. This includes thermal protection, high noise insulation, and low maintenance costs. And if we compare them only by appearance, then, unlike wooden ones, plastic windows more stylish look. All have pluses and minuses. Also with plastic windows, which still have certain disadvantages (read the article about the harm of plastic windows). One of these disadvantages is the complexity, and sometimes the impossibility of removing scratches on them.

In order to eliminate scratches on plastic windows, you will need:

- flannel;

Wooden block;

Liquid plastic (for example, Cosmofen);

Marker for plastic windows;

Solvent 646.

How to fix scratches on plastic windows?

1. Wash the surface to be treated thoroughly with a wet sponge. Don't wet the sponge detergents, because they are able to destroy the structure of the plastic. Then wipe the window well, dry. Wear gloves. Use a soft cloth (such as flannel) to repair small and shallow scratches. To do this, you need to make a homemade roller for grinding. take wooden block, having a length of 15 cm. Attach several layers of fabric to a bar or make a cotton layer - these actions must be performed so as not to further damage the plastic window. Next, fix a flap of soft tissue on the resulting base. Take the homemade roller that you got and sand the scratch on the window.

2. Take liquid plastic and use it to remove larger and deeper scratches on the glass. Liquid plastic (for example, Cosmofen) can be purchased at organizations that sell component materials for plastic windows. Since the solution contains acetone, you should be careful with it. You should take a piece of coarse cloth, apply a little liquid plastic and wipe the surface of the window in a circular motion. You do these movements until the desired result is obtained (until you get rid of the scratches). Then wipe the plastic with a dry and clean cloth. Rags, fabrics used in the work, then must be disposed of.

3. Deep scratches can be removed with Solvent 646. Take a piece of cotton wool and a damp cloth. Moisten the swab lightly with the solvent. Wipe scratch light movements. To prevent the solvent from corroding the plastic more than necessary, you need to dissolve the plastic a little and immediately wipe it with a damp cloth. Repeat these steps until the result. That is, constantly dissolve the plastic and wipe immediately with a damp cloth. Before using this strong solvent on a plastic window, practice first on ordinary glass plastic to understand how it all works.

4. Use of a special marker, which can be purchased from organizations that sell accessories for plastic windows. Using a special marker, remove scratches from the laminated window (where the “wood-like” film is pasted). Clean the surface of the window and in one motion paint over the scratch along its entire length.