Automatic watering of indoor plants: while the owners are away. Other convenient types of watering for indoor plants

How to take care of soil moisture for indoor plants before being away from home for a long time? Useful system automatic watering.

Micro-drip devices for automatic irrigation

For a collection of plants in the same room, on a balcony, loggia, patio or in a greenhouse, garden micro-drip systems of automatic watering. This is " younger brothers"gardening systems, described in detail in the article. Micro-drop devices are connected directly to central water supply. Water is supplied and turned off at a predetermined time thanks to the built-in timer. When leaving on vacation or a business trip, you don't have to worry about the fate of the "green lodgers".

The best option for a house or apartment with an average collection of up to 30 plants - micro systems drip irrigation with tank . Many tubes come out of the tank, through which water enters the droppers. The latter are plastic or with a ceramic tip, which is stuck directly into the ground.

ON THE PICTURE: Micro-drip irrigation system with a reservoir for a collection of up to three dozen plants.

A conventional dropper is manually adjusted with a special wheel. Its scrolling regulates the intensity of watering, for example, up to 20 ml. (20 drops) per hour.

Advanced ceramic tips act as soil moisture sensors. Depending on the moisture level of the soil, the droppers supply water or stop watering.

Ceramic cones

Popular among flower growers ceramic cones. These are kind of "carrots" from which plastic tubes extend. "Carrot" is stuck into the pot, and the end of the tube is lowered into a tank of water. At the same time, the process of water supply is not controlled manually. Moisture is drawn from the pressure vessel each time the earth dries out.

Producers of "carrots" unanimously speak about high quality and device reliability. However, the bad experience of some flower growers has shown the opposite. Ceramic cones clog easily, sometimes do not form desired pressure. Have to look right place for a water tank to create this very pressure. But even here a problem arises: if you install the tank too high, there is a risk of flooding the plant, too low - the water may stop flowing altogether.

ON THE PICTURE: Ceramic cones are not very reliable, because. often clog and do not always provide the desired pressure.

In the absence of free space to install a vessel with water near the plant, use ceramic bottle cap. Advantage this method- ease of use. Attach the nozzle to an ordinary plastic bottle filled with water, insert it into the pot and forget about watering. The device will control the water supply itself, and the plant will receive exactly as much water as required. This is a great economical option: when using large two-liter bottles, you can forget about watering for a whole month.

ON THE PICTURE: Ceramic nozzle on the bottle - a simple and economical option for automatic watering.

There are decorative variations of ceramic cones in the form of animals, birds, butterflies, etc. They look very cute and are able to enliven the interior. But, unfortunately, such "toys" are not suitable for irrigation: because of the small volume, you will often have to add water.

enema balls

Outwardly, "enemas" look like spherical flasks with watering pipettes that are filled with water and inserted into the pot. When the soil begins to dry out, oxygen enters the stem of the flask and pushes out plant needs amount of water. In general, "enemas" are a good option for automatic watering, but they do not dose water well and sometimes flood the plant.

ON THE PICTURE: Enema balls provide watering of the plant and look original in the container.

self-watering pots

The self-irrigating pot consists of two containers. A plant is planted in one of them, water is poured into the other. The plant gradually absorbs moisture through special wicks.

ON THE PICTURE:"Smart" containers cope with the function of automatic watering of plants. Photo Tatura Florist.

Such a container is usually equipped with a water indicator. This allows you to accurately determine how much moisture is left in the pot and when you need to top it up. Technology self setting a similar irrigation system is shown in the video: "".

Do-it-yourself automatic watering organization: three simple ways

Automatic watering of a collection of plants can be organized independently, and for a short time and without significant material costs.

1st way

You will need: several hospital droppers according to the number of plants in need of watering, plastic bottle 5 l., elastic band or wire for fastening the ends of the tubes.

How to do:

1. Remove the needle tips from the droppers.
2. Check droppers for integrity by blowing into them. If the tubes are not damaged, they will be well blown from both sides.
3. Connect the ends of the tubes together and tie them with an elastic band or wire. So they will lie quietly at the bottom of the bottle, and not float on the surface. try do not pinch the tubes .
4. Dip the tied ends of the dropper tubes into the water bottle and place the bottle as high as possible.
5. Open the dripper regulator by running water through the tubes, then immediately close it.
6. Insert the free ends of the straws into the pots and use the wheel to adjust the amount of incoming water.

ON VIDEO:In addition to droppers, medical syringes are suitable for creating home-made irrigation devices. From such a syringe, a plastic bottle and a PVC tube, a drip irrigation device is obtained.

2nd way

You will need: plastic water bottle. The size depends on the root ball of the plant. For a tub, several medium-sized bottles are taken, for a compact pot - one is small.

How to do:

1. Make small holes in the bottle cap.
2. Place the bottle upside down in the container with the plant.

ON THE PICTURE:Automatic watering from a bottle, plastic or glass, is also good for indoor seedlings. Photo by Megan Andersen-Read.

3rd way

You will need: nylon cords or laces, woolen threads, twisted bandages or any materials from which wicks can be made; a basin or bottle filled with water; peg for fixing the wick.

How to do:

1. Twist an impromptu wick from improvised materials.
2. Dip one end of the wick into a container of water.
3. Secure the other end to the plant container with a peg or other means.

ON THE PICTURE:Wick automatic watering will keep healthy and fresh. Photo by u/skysong4.

1. Micro-drop automatic irrigation systems with connection to central water supply preferred for medium to large plant collections.
2. If the water supply is blocked during your absence, a micro-drip system with a reservoir is recommended.
3. for watering individual plants use bottles with ceramic nozzles - simple, cheap and effective. One container for 2 liters. enough for about a month of watering.
4. If the irrigation system is not equipped with a soil moisture sensor, it is better to purchase one separately. The presence of such a sensor will save plants from the destructive waterlogging of the earth.

Irrigation system designed for watering indoor plants clean water indoors and should not be used for industrial purposes.

Advantages of this automatic watering:
One of the best autonomous systems that allows you to leave home plants unattended for a long time.
Several hoses for plants of different lengths
Battery powered
Convenient setting of watering time and frequency of switching on
Has no analogues in this price segment

The principle of operation of the automatic watering system for domestic plants and the power of uniform watering!

1st day. System installation

7th day after system installation

14th day after system installation)

Characteristics and equipment:
The watering timer itself with a mount - 1 pc.
Hose 4/6 mm - 10 m
Tee - 10pcs
Thursday - 3 pcs
Through coupling - 3 pcs
Hose cap - 3 pcs
Irrigation drip - 10 pcs
Filter for water purification - 1 pc.

Also, if you want to extend the system, we have an expansion kit for 5 plants price - 250 rub

Expansion kit complete set:
Irrigation drip - 5 pcs
Tee - 5 pcs

Many are fond of growing indoor plants. This activity is not only interesting, but also quite a useful hobby. It calms nervous system, perfectly relieves stress, gives impetus to self-improvement and new knowledge. Success in growing indoor plants can only be achieved with systematic watering. But it's not always possible to do so. Business trips, work, and many other reasons that do not allow watering plants at a certain time. An automatic irrigation system is ideal for solving this problem. Having such a system, you should not worry about the condition of your favorite plants during your vacation, business trip. Rest assured that your plants will receive required amount nutrient moisture. The system can be mounted on a water tank using a special bracket or mounted directly on a standard plastic bottle. Requires 4 AAA batteries to operate (not included).

There is no need to connect to a water tap. System automated irrigation extremely compact. So it does not take up much space in the apartment. Watering is carried out drip method based on a human-defined schedule. One such system can water up to 10 indoor plants. The device works reliably and efficiently. If you use a large capacity, Easy Grow-10 will independently decide main problem- delivery of the required volume of water for the normal life of indoor plants. So such an automatic irrigation system can be not only a temporary lifesaver, but also work on an ongoing basis.

PREPARING THE SYSTEM FOR WORK

Cut the hose to the lengths you need. Using tees, splitters, connectors, plugs and drippers, assemble the irrigation system of the desired configuration and connect it to the top fitting of the controller. Assembly of the system will be greatly facilitated if the ends of the hoses are preliminarily held for several seconds in hot water. Connect a piece of hose with a filter to the lower fitting of the controller. Attach the bracket to the controller and attach it to the water tank as shown in the left figure. For water, you can use a plastic bottle, as in the right picture. In this case, you do not need a bracket.

Open the cover at the bottom of the controller, slide out the battery pack and install four AAA 1.5V alkaline batteries into it.

You will hear a short beep, and you will see the test passing on the digital indicators.

CONTROLLER CONTROL PANEL

- Digital indicator WateringTime(Watering duration) indicates how many seconds the pump will run. You can set the duration of watering from 1 before 99 seconds.

- Digital indicator IntervalTime (Irrigation frequency) indicates how often the pump will be switched on. If you set the value 0,1 , then watering will occur every hour. If set 1 , the pump will turn on every day.

If a 2 then once every two days. Maximum value - 30 , i.e. once every thirty days.

- Left button sets value Watering duration. Pressing the button once increases the duration of watering by 1 second, and pressing and holding the button for 10 or a multiple of ten seconds time.

- Right button sets value Irrigation frequency. By repeatedly pressing this button, you can set the frequency of watering from 0,1 before 30 days.

- Button turns the pump on and off in manual mode, and also turns on the digital indication on the control panel.

To turn on the pump manual mode, you need to press this button twice - after the first press, the indication will turn on, and after the second press, the pump will turn on. A third press of the button turns off the pump.

- Led indicator shows what mode the controller is in:

Flashing fast in green- controller irrigates

Slow blinking green - the controller is working according to the set program

Solid green - the controller is being programmed

Solid red - Batteries are low and need to be replaced.

CONTROLLER PROGRAMMING

1. Press the button The display on the control panel lights up - the system is ready for programming.
2. Set with the left button Watering duration in seconds.
3. Right click set Irrigation frequency in days.
4. After a few seconds, the controller will turn on the pump and the first watering of the plants will begin, during which the LED will flash green rapidly. At the end of watering, the controller will go into standby mode - the LED will flash green slowly until the next watering.

System configuration

Control unit (Timer - 1 pc.), Hose - 10 meters, Filter - 1 pc., Tee - 10 pcs., Cross - 3 pcs., Hose connector (Double) - 3 pcs., Droppers - 10 pcs. Plugs - 3 pcs.

Plants that are meant to be grown indoors especially need proper watering. how perfect option special device - Automatic system drip irrigation of indoor plants (flowers). In addition, there are several more ways that both professionals and amateur flower growers successfully use. But, buying a drip irrigation system for indoor plants from connoisseurs of flowers has always been considered right approach to caring for plants.

Proper watering of indoor flowers in several ways

A process such as watering living indoor plants can be divided into 3 types. Which include the following:

• in the first, the direct participation of a person is necessary. This process is carried out with the help of watering cans;
• devices for a free-standing pot with a plant. This process is responsible for supplying water to the roots of a single plant;
• systems for several plants. Which, without human intervention, can supply water to a number of roots.

The second and third methods are automatic drip irrigation for indoor plants. Since the presence of a person is absolutely not necessary. From these three methods, two categories can be created that clearly distinguish them according to the principle of moisture absorption by plants.

1. Absorption of moisture by the roots through upper layer soil. When the flower is watered from above.

2. Watering through the water from the pan in which the pot is located. Pouring it into the pan, moisture comes to the roots from below.

It should be borne in mind that any devices that are involved in the supply of water to the roots of plants are associated with:

• the quality of the container in which the flower is planted. It must be from a material that will not emit harmful compounds;
• soil quality. This should be a special mixture, and not soil from the street in which there will definitely be either fungal spores or some kind of pest;
• quality drainage system. The outflow of excess water, as well as the supply of oxygen, depends on it;
• top dressing. Without additional nutrient fertilizers, any plant will not be able to correct formation root system. As well as the development of stems and leaves.

There may be times when the irrigation system potted plants works correctly, but due to the lack of drainage, Bottom part roots rot. And the disease will eventually spread throughout the plant. It may die, or it will not look nice.

Watering cans for watering plants in the room

Of course manual watering gives a lot of pleasure. Since in winter and summer you can observe the development of plants, taking a direct part in watering. Not a small share in the positive mood is the assistant of the lake.

Moreover, their choice in the domestic market is quite large. Of all the diversity presented, we can distinguish:

• forms. Flat and round, with different spouts and handles;
• material. From plastic to metal. With paint coatings and coatings for corrosion protection;
• volume. As for this characteristic, for home use, watering cans are best used from 0.5 to 2 liters;
• colors. All shades of colors are here. From white to black. And colored tones will overshadow the rainbow.

Irrigation of leaves and stems with a watering can that is comfortable to hold in your hands will be a pleasant experience.

Why automatic watering of flowers in pots is convenient

And the point is not only that in the absence of the owners there will be no one to water. The time has come when modern man very little free time. And admire blooming beauty many love. So:

• in order not to puzzle over what to do with flowers during the holidays, the easiest way is to automate the process of filling the soil for plants with moisture;
• automatic watering machine for indoor plants is useful not only in the days prolonged absence owners, even if small, but winter garden. After all, the number of pots on the windowsills is increasing every year. And over time, caring for them develops into everyday compulsory work;
• in order to shift part of the work to the machine and watering systems for indoor plants have been developed.

As amateur flower growers say, this is practical. Thanks to automation, caring for plants brings only pleasure.

As for standing flowerpots, providing them with devices for automatic watering is also practical. And not only, since these devices look very nice next to the green foliage of the flower. And never forget to water them.

What is the automatic watering of indoor (home) flowers

It is not uncommon to hear the question of which flowers are suitable for automatic watering. The answer to this question is obvious - everything. It is only necessary to choose the right method for the principle of action, which should be suitable for a particular plant. Here you need to know existing methods irrigation, and use the irrigation controller. Which will tell you what is the state of soil moisture in a pot on this moment. Since the periods of watering the plants are not the same, it will be easier to determine the specific time for this. Adapting to help this device over time, watering control will be easy and simple.

Blumats for watering indoor flowers

Another principle is the porosity of the material, which determines the degree of dryness of the earth in flowerpots. Such material is very often used for the manufacture of devices for the timely introduction of water into the soil in a pot. Such automatic watering of flowers includes:

• irrigation systems. The material from which the tip of the bloom is made is special. The whole effect of this method lies precisely in it;
• the life-giving moisture in the tank enters the soil through such a tip. Which clearly responds to the degree of soil dehydration.

Smart ceramic cone for watering plants is often used by amateur growers. It can serve one pot, but systems with ceramic tips also exist. They can serve several pots with indoor green plantings planted in them.

Smart indoor watering system for winter garden

Very often, when watering our green pets, the law of gravity is used. I.e:

a container that stands above the level of the plant, supplies water through the tubes to the pot;

• not tubes are stuck into the ground, but droppers, through which water flows or drips (types of droppers are different);
• to regulate the rate of water flow in the systems, control switches are provided;
• simple but very effective principle which has been in use for a long time. A pronounced representative of this principle is the Green Helper GN-912 Drip Irrigation Kit.

The most correct is basal drip irrigation for home flowers in pots, since the gradual entry of moisture into the ground prevents the formation of a dry earth crust.

Irrigation system is quite a large number Plants are powered by a container of water. The container is not always included with the system. Some of them can work under pressure, that is, from a water tap.

Exist electronic systems watering indoor plants. They run on batteries. Using such a system, you can set a specific program that will control the start and end of irrigation.

Wick watering for indoor plants

This is a very common method of watering. Here the main role is played by the so-called wick connecting water and soil in a pot. That is, a lace of a certain structure, which easily supplies water to the soil. The wick watering method is suitable for flowers that are afraid or simply do not like water droplets to fall on their leaves. Especially often, such watering rules apply to indoor violets.

In order for the flowers on the leaves of which it is forbidden to get water (they will be taken in spots after that) to be comfortable, you need to:

• at the bottom of the pot was a wick. Without it, this method is not possible. After all, the method itself is named thanks to him;
• a pallet must be attached to such a pot. Water poured into it through a wick will water the plants with life-giving moisture.

Balls and flasks for automatic watering of flowers in the house

A separate category is occupied by automatic watering of indoor plants with spherical devices. They look like a ball with an elongated tip inserted into the ground. The principle of their action:

That is why the soil for flower pots must be selected correctly. And the duties of a person will include periodic control of the access of free air through the hole in the tip. It should not be tightly packed with dried earth. And also, if necessary, filling the flask for watering flowers with life-giving moisture.

Such devices can be made in various options on:

• color. Color colorful tones can be quite diverse, both solid and iridescent;
• material. There are two options - glass and plastic. Fragile glass may crack. Plastic ones are more durable;
• form. They are not in vain called balls for watering indoor plants. Since most often it is the shape of a ball. But there are also various figures, including animals.

Smart pots (containers) for convenience and proper watering

There is a lot of information on this topic. Since there are a large number of varieties of smart pots. For almost every occasion, there is an opportunity to pick up such an item. Pots are most often called containers for small flowers, and containers for large plants. If we consider their main characteristics, we can distinguish the following:

• material - plastic, ceramics, glass;
• form is varied. The container can be on wheels for moving;
• additional attributes - a flower pot with a watering indicator.

If necessary, the watering indicator for indoor plants can be ordered separately. But very often smart pots Sold with indicator.

One of the very profitable smart pots is a device consisting of two containers. The first time after planting the plant, it must be watered in the usual way from a watering can. The roots will grow, penetrate into the lower container, now you just need to add water there. And the roots themselves will get it.

What better pot Or a flower pot with a root watering system? The cache-pot is a kind of pallet. But the pallet is not with low sides, but with sides whose height corresponds to the height of the pot or container itself. Only the volume of the cache-pot is always larger than the pot. Since the latter, with a flower growing in it, should fit freely in the first.

Other convenient types of watering for indoor plants

Not so long ago, quite practical watering assistants appeared:

• hydrogel. Their purpose is quite diverse, but home flowers planted in such soil feel just great. It's pretty beautiful decor and artificial soil;
• capillary mats. It uses the ability of the material to absorb large amounts of water and gradually release it. Another convenient way.

Having chosen the right way of watering for your pets, you can only enjoy the beauty of greenery and flowers all year round.

Automatic watering of flowers in pots is the topic of our article.

Watering home flowers is a very sensitive and delicate issue. Their timely satisfaction of the need for water is a guarantee of full flowering and general health indoor plants. It is this attitude towards green pets, a guarantee blooming winter and summer home clearing.

How to water indoor flowers

A lifesaver in caring for them is the automatic watering of indoor plants. Although if you look, when we like to water the plants ourselves, then we find time for this. Accordingly, this procedure can be carried out:

• independently, with the help different kind watering cans specially designed for this. There are watering cans different forms, volumes and with different nozzles. Their colors correspond to all shades of the rainbow. Therefore, you can always choose and order any one you like;
• resorting to a more reliable method, when a special automatic system is responsible for the irrigation rules. Varieties of which the same is quite enough in order to choose the most suitable in a particular situation.

Big difference between watering land plot there is no dacha territory and watering of the winter garden or several flowerpots on the windowsill. The principle remains the same. Only the scale is different. And of course, in connection with this, the method of supplying water is more simplified.

What is watering, that is, how do indoor flowers get water? Watering can be:

• top, when we ourselves water the flower pots;

• intrasoil, when watering is carried out by supplying water to the ground of the pot using a dropper or flask;

• root, when water enters from below and rises through the plant from the roots to the top.

​

The main components for the proper development of landings are:

• oxygen,
• fertilizer,
• water.

Oxygen enters the roots through the top layer of soil. When watering from a watering can, as the soil dries in the pot, a dry crust forms. Which becomes an automatic obstacle to the supply of oxygen to the roots. This is one of the important reasons why it is better to use automatic watering.

The second reason is the human factor. We simply may not have enough time to timely watering colors.

The need to use a watering system for houseplants

As much as we love home plants, caring for them takes quite a lot of time. And that upsets us a little. Particular attention should be paid to timely watering:

• Proper watering is essential for every plant. Given the diversity of their species, the norms and frequency of irrigation of each, it may turn out that it will be difficult to do without a reliable assistant;
• he will never let you down and leave dirty spots on the windowsill, in right time and in the right amount will give water to flowers;
• especially critical period for water supply indoor flower beds time in the absence of the owners. Who better than a device in the form of automatic watering to cope with this in our absence.

There are a lot of automatic watering systems for flowers growing in a house or apartment. Each species is somewhat different from the other, but the ultimate goal of each of them is to help us simplify the care of green pets. Or rather, to free up a certain amount of time, if we need it.

Irrigation systems for indoor flowers are so diverse that their number makes it difficult to try to make right choice. We will focus on the more popular ones. who have already received positive reviews from our buyers. And as for those, the quality and price of which correspond to each other.

Irrigation systems blumat (blumat) and their advantages

most main characteristic watering flowers with the help of blooms is that water is supplied to the root of the plant as needed.

• in case of drying out of the soil, the bloom reacts to a lack of moisture and immediately automatically starts supplying water;
• in this way it is done at any time of the day;
• maintenance of such an irrigation device is very simple. If the conical body is dirty, it must be cleaned or washed in the usual way;
• and one more nuance, the container from where watering should always be filled with water.

A ceramic cone for watering bloomat plants is a fairly durable fixture. Having filled the container with water during the holidays, you can relax calmly, and upon returning home, make sure that the earth in the pots is completely in the required state of humidity.

How does a pot or planter for flowers with a root watering system work?

Root watering can be carried out using a pot and planter, which supply water to the roots according to the principle shown in the photo. Such pots are also called smart.

The watering system for potted plants basal watering consists of:

• from two containers. Of which the outer one is a decorative planter into which water is poured. And the inner one is a reservoir with a system and drainage;
• drainage is constantly wet. And the roots of the plant, reaching out to it, replenish their reserves with moisture;
• water is poured into the pots through a watering hole specially designed for this purpose;
• such smart pots are usually sold with a water level indicator in the kit;
• in order to remove excess water at the bottom of the planter there is a sleeve.

Irrigation control in this way is very convenient, the indicator will always tell you when the tank needs to be replenished with water. The watering system for potted plants such as pots and pots is not only convenient, but also fits perfectly into the interior of the house.

Flasks for watering flowers and their advantages

A flask or ball of an auto-watering can to the maximum simplify the daily watering of flowers on the windowsill. Balls for watering indoor plants are:

• glass.
• plastic.

When choosing flasks for automatic watering of flowers, always take into account such a fact as the presence of small children and pets in the house. glass balls for automatic watering of indoor flowers look very beautiful and effectively cope with their task. But, they fight. Therefore, if a cat climbs onto the windowsill, the likelihood that it will not hook on the watering can is very small. And the fragments broken glass On the floor, we have absolutely nothing to do. Such plastic products in this case will be more reliable.

Automatic watering of indoor plants using flasks is carried out as follows:

• First of all, the ball must be filled with water;
• insert the tip into the ground of the flowerpot;

Operating principle:

• when the soil dries up in a flowerpot, the air released in this case enters through the tip into the flask;
• thus the air replaces the water and it flows out to water the plant.

How is wick watering houseplants

The principle of this method of watering indoor flowers is very simple. It is based:

• on the use of a conventional wick;
• such a cord is a connection between water and soil in which a flower grows;
• with its help, the plant drinks water;
• water and a wick are in the lower stand to the flowerpot.

Often our customers ask what flowers are suitable for such watering. As practice and discussions of this issue by our regular customers show, violets and orchids are most suitable for such watering.

How is drip irrigation for home flowers in pots

Such basal irrigation occurs with the help of special droppers. To implement it, you can buy a drip irrigation system for indoor plants in our online store.

Such a system:

• may consist of a container of water, tubes and droppers that are inserted into the ground of each pot;
• if the plant is large, it can be watered with several droppers;
• automatic drip irrigation for indoor plants, it is reliable and efficient system glaze.

Pots (containers) with flowering plants, which usually decorate the area around the house, the same can be watered with drip irrigation.

Cones for watering home flowers

Devices in the form of cones are also popular. Their use is very simple:

• the cone is screwed onto the neck of an ordinary plastic bottle;
• before that, the bottle is filled with water;
• the cone is inserted into the ground of the pot;
• water gradually seeps into the ground.

If there is a need to apply fertilizer to the soil where the flower grows, then it can be added to the water for irrigation. And the device for automatic watering itself will deliver the fertilizer to its destination. It should be noted that in some cases, fertilizers may be sold complete with irrigation cones.

Automatic watering of indoor (home) flowers with a controller or programmer

Before that, we talked about fairly simple automatic watering. But there are systems consisting of several components. This set of parts includes a timer, which is called a controller or programmer. An irrigation controller is needed in order to use it to set a program. According to the program you set, the plants will be watered:

• start at the specified time;
• continue for a certain period of time
• end when programmed.

Automatic drip irrigation system for indoor plants (flowers) can water both one flower and a large number of them.

What is an indoor plant watering indicator

The flower watering indicator is provided to determine the water level in a container or planter. It shows when your participation in watering is necessary - filling the container with liquid. Flower pot with watering indicator, it is a very convenient way to take care of room green bed.

Ways to water indoor plants are quite diverse. In order to start using one of these assistants, you only need to order from us one of the irrigation systems for you and your favorite flowers.

Man cannot live without rest, and plants cannot live without water. Sometimes these needs come into conflict, because few people would think of taking indoor flowers with them on vacation or giving up a long-awaited trip in order to take care of house plants. As a rule, we trust close relatives and friends to water flowers during the holidays. However, this solution is not always feasible. Firstly, once again I don’t want to burden others with my worries. And, secondly, relatives and friends may simply not know how often and with what intensity to water your violet, geranium, crocus, etc. To save yourself from unnecessary worries, "Dream House" offers to familiarize yourself in advance with the most reliable and effective ways organization of automatic watering of indoor flowers during your absence.

Devices for automatic watering of indoor flowers

In specialized flower shops you can find several useful devices, which are able to provide automatic watering of flowers during the holidays. Let's take a closer look at their features and effectiveness:

• Aquaglob. This device is made in the form of a round flask with a very narrow spout. The essence of the device is quite simple: the aquaglob is filled with water, turned over and immersed in the soil with a narrow part. Since the opening of the flask is extremely thin, the water does not pour out of it immediately, but seeps out gradually. Depending on the size, aquaglob can provide automatic watering of flowers for a period of one to two weeks.

• Blumat(Blumat), which means "carrot", refers to an automatic drip irrigation system. The design of this device includes a cone-shaped base and a plastic tube. The base is immersed in the soil, and the tube is immersed in a tank of water. Since the system is equipped with special sensors, water enters the soil in a dosed manner. When the earth dries out, the device fills it with water, but if there is enough moisture, the valve on the sensor closes, and moisture is not transmitted. Thus, the device "waters" the flowers as long as there is water in the reservoir.

• Planters with automatic watering. Cache-pots and pots with automatic watering are equipped special system storage and transfer of water, which is at the bottom of the products. When you water the flowers, the rest of the moisture remains in the device, and then evenly distributed over the soil as it dries. Some of these and pots, in addition, are equipped with an indicator that allows you to set the mode and intensity of watering for several weeks in advance.

Devices for automatic watering flowers from improvised means

Everything modern systems automatic irrigation are created in the likeness of the well-known improvised designs. Therefore, it is possible to organize watering flowers during the holidays from improvised means.

• Automatic watering from a dropper. With watering flowers during your absence or vacation, a simple medical dropper. To create an automatic sprinkler, you need to attach the dropper tube to the water tank and adjust the intensity of the dripping with a clamp. After that, put the dropper needle on the ground near the roots of the plant, but do not deepen it into the soil, otherwise it will quickly clog.

Watering flowers during the holidays - drip

How to water flowers when you leave home

• Automatic watering from a plastic bottle. An ordinary plastic bottle will also help to save flowers during the holidays. To make a flower drinker out of it with your own hands, you need to draw water into the jar, put a thin mesh on the neck, screw on the lid and use a needle to punch several small holes in the lid. After that, the drinker bank is turned upside down and deepened into the soil. Water will gradually seep through the holes and the plants will not be left without moisture. But, since the intensity of the “bottle” watering cannot be adjusted, it is likely that the drinker will flood the plant. To avoid this annoyance, use automatic bottle watering only for large-scale pots and moisture-loving plants.

• Automatic watering from capillary mats. Unlike previous methods, automatic watering with the help of capillary mats provides the soil with extremely slow, but regular moisture. This method automatic watering is very simple: you need to put a wide piece of cloth under the pot and lower its free edge into a container of water. Because the fabric tolerates moisture well, the soil will be hydrated through the pot's drainage holes. As a capillary mat, it is best to use a terry towel that gets wet quickly or a ready-made capillary mat.

• Wick watering. It involves the transfer of water to plants through a wick - any rope or cord that does not rot from moisture. One end of the wick is placed in a container of water, and the other is deepened into the soil. To ensure faster and better humidification, it is recommended to install a water tank above the level of the pot.

If shortly before leaving you decide to transplant the flowers, then pull the wick through the drainage hole of the pot and place it on a tray of water. Thus, root system plants will receive moisture without your participation.

We have already figured out a little about how to water flowers when you go on vacation. Now let's look at a few important nuances, which will help to preserve the flowers during your departure:

• firstly, so that the plants waste moisture more slowly, move them to a cool and dark place;
• secondly, install the pots close to each other so that the most capricious specimens are in the middle;
• and thirdly, whichever automatic watering system you choose, on the day of departure, water the plants abundantly and spray their leaves.

In addition, to reduce the amount of fumes, spread around flower pots drainage, moss or hydrogel. If a plant is very capricious and demanding to care for, cover it with a plastic cap with air holes, thus creating the most favorable microclimate.