How to paint a chiffonier white. Not sure how to update an old closet? Budget ways

Freshly painted cabinets can transform your kitchen and cost a lot less than replacing an old one. Before you decide to start, in any case, check the condition of your cabinets. If they are made of chipboard that is deformed and rotted, even good painting can't hide flaws. On the other hand, strong wooden cabinets can be greatly improved with a fresh coat of paint.

Steps

Part 1

Preparing Your Cabinets

Take out all drawers. Remove all drawers from the cabinets and remove all fittings connecting the drawers to the exterior front.

Remove cabinet doors. Remove the screws from the hinges and remove the doors from the frame. Once the doors are removed, go back and remove any hardware bolted to the frame frames.

• It's the same good opportunity evaluate the condition of the hardware that holds the cabinets together. Any screws, hinges and brackets that look worn should be replaced after the cabinets have been painted.

1. Wash all cabinet surfaces. To remove dirt and stains, use a grease remover and a sponge or soft cloth before painting kitchen cabinets. Rinse the cabinets with water and let them dry completely.

   • TSP, or trisodium phosphate, is an excellent cleaner industrial grade which will surely remove grease and grime from the surface of your cabinets. Since TNF can be harmful to environment, you can look for a replacement for him.

2. Repair any defects by filling in scratches or dents in the wood with wood putty or drywall putty. A professionally painted cabinet will not look complete without a smooth surface, whether it has scratches, scuffs, gouges, or other nasty blemishes. Make sure the filler is dry.

   • Use a spatula or something with a flat surface to remove excess putty. It is better to apply more than not to apply, as the putty shrinks somewhat after drying. You can always fill the dents with another layer of putty if you didn't put enough on the first try.
   • At this stage, decide if you want new drawer handles. If the new hardware requires a different hole diameter, or the holes are closer or farther apart, you must fill the existing holes with wood putty and drill new ones before painting.

   Part 2

   Sanding and Priming

   1. Sand the surface of the cabinets with sandpaper. Sand lightly with 120 grit sandpaper all the areas you want to paint. When you paint cabinets, this will help the primer and paint adhere better.

      • Sanding is very important for cabinets that have a shiny polyurethane finish. New paint applied to this shiny surface will peel off quickly.

   2. Prime sanded surfaces. A primer is a coating that is applied before painting. Paint applied directly to wood will dry very quickly, as wood is very porous and absorbs solvent quickly. Therefore, the Primer helps the paint adhere to it and dry longer, making the color brighter and the texture smoother.

      • Most experts stick to oil-based primers. Oil-based primers can be used even when using latex paint over the primer. However, you must let the primer dry completely, and then sand it with sandpaper.
      • If your cabinets are stained and have old view, you can coat them with stain primer. These primers are designed specifically to hide unsightly stains caused by mold, smoke and other irritants.

   3. Let the primer dry, then sand the primed surface with fine sandpaper. Once the primer is completely dry, go over it with 240 grit sandpaper. Again, this will create a surface roughness that will help the paint layer(s) adhere better to the primer.

   Part 3

   Painting

   Tape off any areas that you won't be painting. Tape around the inside edge of drawers or cabinets if you don't want paint to bleed in. Be sure to glue along the edge of the ceiling or walls where they meet the cabinets.

   Paint the interior first. Use a short brush for all the small areas of the cabinet drawers, and continue to paint inside the cabinets with a small roller or brush.

   1. Then we paint the cabinet doors. Roll out the paint on the doors with a large roller, painting large areas at a time. Paint the edges of doors, drawers, cabinets with a small brush. Don't forget to color too. reverse sides doors and drawers.

      • Apply the paint in a thin layer to leave fewer visible strokes. If you have applied a primer in advance, thin strokes should cover the surface of the cabinet in a quality manner. Remember that you can apply a second coat of paint.
      • You can take the cabinet doors outside or into the garage and use a spray painter to paint them. Let one side dry, turn over and apply on the other side.

Restoration or independent production furniture is a rather complex and responsible process. This is due to the peculiarities of certain types of materials and the application of certain types of coatings to them.

That is why the question of how to paint a chipboard cabinet is of great interest to many craftsmen.

step by step process

To begin with, it must be said that such work is quite difficult and tedious.. People who want to figure out how to paint a wardrobe from laminated chipboard or others similar materials They don't even know what they're going to face.

Training

• To begin with, the entire product will have to be disassembled. Wherein professional craftsmen it is immediately recommended to pay attention to the quality and condition of the fixing elements and, if necessary, replace them.
• When asking whether it is possible to paint varnished or laminated surfaces, it is necessary to understand that first all structural elements must be sanded. In this case, the old coating is completely removed.

• After that, the restoration instructions require the application of a primer to the surface. It will protect the material from various kinds impacts and increase its level of adhesion. (See also the article.)
• Next, the surface is puttied. For this you can use special formulations, paying special attention to defects and irregularities that arose during operation.

• Some masters prefer to apply putty only on problem areas because they think that the less it is, the better. However, if we are talking about restoration and subsequent staining, then it is worth covering the entire structure.
• After that, all elements are sanded again using low-abrasive materials to give the surface a smooth finish.

• At the final stage preparatory work the cabinet is again treated with a primer and allowed to dry. At the same time, manuals that tell how to repaint a chipboard cabinet are recommended to withstand a time interval of at least 4 hours.

Advice!
Experts say that all locking elements and other fittings become unusable during the period of operation.
Therefore, they must be replaced with new products, even if no visual defects are found.

Painting

• At this stage, you need to choose a dye. It should be remembered, however, that the price of modern materials for working with wood, namely furniture is very high. However, the volume of work is small, which implies the alignment of all costs.
• If there is no desire to purchase specialized compounds, then you can use ordinary oil or alkyd paint.

• It is best to apply the material to the surface with a sprayer. If the work is done by hand, then it is worth renting it or using cans of paint. Otherwise, smudges are almost impossible to avoid.
• It should be noted that all such work must be carried out in a well-ventilated area, at a certain temperature and humidity.

• After the first layer dries, you can make an additional primer and apply the paint again. This prevents the appearance of oil stains or hides the texture of the wood.
• When all the work has been done, the cabinet must be assembled, after which it is possible to correct defects or uneven color overlays with paint. It is worth noting that it is best to assemble after applying the first coat of paint and then drying it. (See also the article.)

• Many tutorials showing how old wardrobe paint from chipboard, it is recommended that after all layers have been applied and dried, varnish the surface. It will serve additional protection and will give colors contrast and shine. At the same time, professional masters say that this must be done in several layers with thorough drying. (See also the article.)

Advice!
The use of specialized or multicomponent formulations will greatly simplify the work, but when using them, a number of certain conditions must be observed, which at the same time complicates it.
Professional masters are always looking for options to facilitate their work and at the same time achieve the highest possible result.

Conclusion

After watching the video in this article, you can get detailed information about how painting is done. wooden furniture or chipboard products. Thus, based on the text proposed above, it should be concluded that this process is quite tedious and can take a lot of time. However, you do not need to have special knowledge or skills to perform it.

Modern interior items go out of fashion very quickly or lose their attractiveness, but acquiring new ones is not always possible. In this connection, the question arises: how to repaint furniture from chipboard with your own hands, so that the product acquires an attractive appearance? It is not always easy to do this, because the result is influenced not only right choice materials and technology, but also the accuracy of the process.

Do-it-yourself painting of old furniture is a difficult and risky procedure. The fact is that for the manufacture of interior items (wardrobes, chests of drawers, kitchen modules), processed materials with a decorative layer are used. Therefore, it is necessary to correctly determine the type of coverage in order to draw up a work plan.

Chipboards used in furniture production, can be of the following types:

There are other types of plates, but they are not so common.

How to paint old furniture

To paint boring or defective interior items, you need to choose a composition suitable for these purposes. The main recommendation when choosing is to abandon cheap options.

Paint for furniture from chipboard should be chosen, taking into account the characteristics of the compositions:

1. Oil. Preference should be given famous brands. A significant disadvantage are unpleasant and toxic fumes, in addition, the drying period of the solution is quite long. It is necessary to lay such a mixture in thin layers, which is why the material is used infrequently.
2. Acrylic. Modern version water-dispersed paints. The composition has many positive qualities which makes it in demand. But when working with laminated chipboard, it is necessary to purchase a solution with increased adhesion and not dilute it with water.
3. Alkyd. This option is much preferable to oil. The products are suitable for painting furniture, but work is carried out in well-ventilated areas due to the specific smell of the composition.

Of the three proposed, the best is acrylic paint, oil paint is affordable, and alkyd enamel considered the golden mean

On a note! For tinting or decorating small areas, spray paint is used. For example, on bedside table one or two containers are required.

Chipboard can be repainted with other types of compositions. The stain is used only for tinting veneered material. The varnish serves to fix the decorative layer, it can act as an independent composition, but this will require complex preparation of the base. For work, it is better to use a quick-drying variety.

An obligatory element of the coating is a primer, the composition must have good adhesion.

No decorative coating is applied to chipboard without primer

How to paint chipboard

Coloring furniture from chipboard includes two main steps:

• preparatory stage;
• painting work.

On a note! When deciding on painting laminated chipboard, it should be borne in mind that the end result, even if all the nuances are observed, does not always meet expectations.

It is convenient to paint chipboard from an aerosol can, especially if you want to make a stencil pattern

Tool selection

Various tools can be used for work:

• Airbrush. Due to the fact that furniture parts made of wood-shaving material have a flat base, it is this device that is the best option. When sprayed, the paint can be laid more evenly. The main problem with this tool is correct selection distances. In the case of erroneous calculations, streaks and sagging are formed.
• roller. This device is most often used at home. It is not always easy to paint with a roller, since the applied layer must have a small thickness, otherwise sagging will become noticeable. To paint furniture, tools with a medium-length fur coat are used.
• Foam sponge. Suitable for tinting and painting well-primed elements, it allows you to get a uniform coating, but subject to the utmost care.

When restoring old furniture, you can get by with an affordable tool

Brushes for such a process are rarely used, their main purpose is decoration. They allow you to create the effect of antiquity, but if a base layer was previously applied that hides the base.

On a note! repainting old table or a chest of drawers, the docking of parts is taken into account: a new layer should not lead to the appearance of distortions and protruding sections.

Foundation preparation

Step by step preparation instructions:

This is how all the details are handled.

If it is not possible to completely disassemble old furniture, then before painting the floor is covered with polyethylene

repainting

Coating of fragments with paint is carried out according to the scheme:

1. The element is primed. It is recommended to perform at least two treatments, each time waiting for the product to dry completely.
2. being prepared coloring composition. It is well stirred and tinted if necessary.
3. The mixture is poured into a convenient container for the roller. The tool is impregnated with a solution, the excess is squeezed out.
4. Painting starts from the middle. The mixture rolls well on the base, the movements should be parallel, it is impossible to create a thick layer. The first layer is the base, you must wait until it dries completely.
5. Then the main coating is applied according to the previous principle.
6. When using an airbrush, you will need to dilute the composition used. For selection optimal distance training staining is carried out.

Regardless of the type of composition, the surface is painted in 2 - 3 layers

If the part is subject to constant impact, then an additional layer of varnish is applied.

Furniture decoration

Decorating such material is not too easy. Many recommendations are found on creating the Provence style, but it will not work to achieve the effect that is obtained on furniture made of wood, plywood or MDF. This is due to the fact that chipboard products rarely have the desired appearance.

Using simple fixtures on furniture made of chipboard, you can create genuine masterpieces

You can diversify the interior in the following ways:

• Painting countertops or dresser fronts White color, and other front parts - in black. For this, paint with a glossy finish is used. The technology completely repeats the one described above, but the difference lies in applying three layers of varnish to the parts. The first layer is left untreated, and the subsequent ones are ground and polished.

To work in the "Decoupage" technique ( artificial aging) special paints are used

• Aging. To create this effect, after laying the base coat, paint with a darker color is applied with a brush. The movements should be sweeping and slightly uneven, a diluted white composition can be applied on top. Everything is fixed with varnish.

With your own hands? In any living space you can find furniture that makes up its interior. Here you can find chairs, various shapes tables, armchairs, sofas, cabinets. Such furniture is constantly in sight and in addition to its immediate functions, it is necessary that it be attractive appearance, decorated the interior of the room.

In this case, the question becomes relevant, how to paint the old cabinet? How to do this will tell the article.

Tip: Any cabinet with peeling paint can be made beautiful and spectacular. Therefore, you should not throw away old models, you can simply repaint them.

Features of old furniture:

• It has the best quality.
• Natural materials are used for its manufacture.
• Furniture items are more reliable and durable.

Cabinets can be made from different materials:

• From a tree.
• From chipboard. Such material absorbs less moisture than wood. Therefore, chipboard will take longer to dry, it is much easier to create the desired color on it, a smaller layer of primer is used, compared to wooden products.

When preparing furniture for painting, you must:

• Remove all removable items:

1. pens;
2. loops;
3. boxes;
4. doors.

The result should be a completely clean cabinet frame.

Tip: Preparing and painting furniture should be done in a well-ventilated and well-cleaned area, and even better on fresh air in the absence of wind.

For preparatory phase for painting it is necessary to prepare:

• Sandpaper with different grits.

• Flat brush.
• Sponge or rag.

• With a sponge or rag, all dust and dirt is removed from the cabinet.
• The remains of the old paint and varnish are removed with sandpaper (see). The process is performed in circular, sweeping movements.
• Coarse-grained is used first sandpaper.
• The cabinet is completely cleaned of any irregularities, varnish and paint residues. This will allow the new coating to lie on the surface evenly and smoothly.

Tip: When rubbing the surface, care must be taken not to erase the veneer layer. Otherwise, you will need to additionally rub the surface from the appearance of bumps and holes.

• After processing the cabinet with coarse-grained sandpaper, the planes are swept from dust with a flat brush.

Tip: You can not clean the cabinet or chest of drawers from dust with a rag. Thus, it will not be possible to get rid of it completely, but you can clog the remaining dust into the surface itself, which will affect the quality of the cabinet painting in the future.

• Places not treated with coarse-grained sandpaper are processed with fine-grained paper.
• The cabinet is brushed again to remove dust.
• The room in which the work is performed is carefully cleaned and cleaned of dust. A dusty room will degrade the quality of the painting.

What paint is used for the cabinet

Of all types of paint, it is better to give preference to acrylic paints.

Its advantages:

• Bright color.
• Has practically no smell.
• It is quite easy to dilute with water to obtain the desired color.
• This paint is quite easy to wash off, which allows you to correct errors when applying the coating.
• Water evaporates after the paint dries, and the coating becomes more durable.

It is not necessary to paint the cabinet in one color.

In this case, you can experiment, for example, use two colors:

• Beige for the base.
• For details - a brighter color.

If you want to choose a different color or shade, you can use white acrylic paint, and then add the desired color to it. By choosing the desired shade, its appearance can be checked on small area furniture. Thus, the color is determined, which fit better of everything, its saturation is selected.

How to prime a cabinet

Before high-quality do-it-yourself painting of the cabinet, its surfaces must be overprimed.

Wherein:

• The primer will prevent the surfaces from absorbing moisture, which will contribute to high-quality drying.
• Won't get lost desired color. After applying the paint to the surface without a primer, after drying, the color may change slightly, due to the absorption of its part into the material.

It is best to use a primer on acrylic base. The components of this primer interact perfectly with the selected acrylic paint. Surface treatment with an acrylic primer is quite simple, the instructions for its use will help with this.

When using a primer:

• It must dry completely.
• Need to produce correct calculations surface areas to be processed, which will allow you to acquire the required amount of material.
• The cabinet is primed with a roller, in a fairly thin layer.
• The cabinet is left to dry completely.

How to paint a closet

Before repainting the old lacquered wardrobe You need to purchase the following tools:

• Brush.
• roller.

When choosing a tool, the owner's preferences and skills should be taken into account, but it is more convenient to use a brush. The latter is more reliable and practical to use.

Brush benefits:

• The paint is applied over the entire surface in an even, uniform layer.
• It can be conveniently painted in hard-to-reach places.

Tip: When choosing brushes and , preference should be given only to high-quality tools. Otherwise, on the surface to be painted there will be villi falling out of the brush, which is of poor quality. Tassels should be chosen different sizes which will make the job easier.

Cabinet painting technology includes:

• The first layer is applied with more than light color than the selected one.
• Its composition must be liquid.
• When hardening, the paint is diluted with water.
• The surface may acquire different colour, which depends on the number of deposited layers:

1. with one thin layer, the structure of the tree is visible, this is well suited for Provence style;
2. a thicker layer is obtained after applying several layers of paint.

• Each layer is applied only after the previous one has dried.
• The mouth of these strokes are applied in only one direction, then you get a uniform color and an original structure.

Tip: When using two or more colors, between them the borders should be sealed with masking tape, which will prevent mixing colors.

• A few days later, the cabinet is applied thin layer matt clear lacquer. It will better protect the painted surface from possible damage.
• After the varnish has dried, all previously removed parts are attached to the cabinet.

Thus, you can transform an old wardrobe into a fashionable and original item interior, which is well demonstrated by the video in this article.

How to age a closet

With a simple painting of an old cabinet, it takes on a completely faceless look, only freshly repainted. old item furniture that can be used on the balcony or in the garage. But it can also become a stylish rarity that will remind you of ancient times, a true interior decoration.

Tip: Only matte shades should be used for painting. For the effect of antiquity, gloss is absolutely not suitable.

Before painting the antique cabinet, the surface is primed with a special primer or primer, which will prevent wood oils from penetrating the finished surface and contribute to better adhesion of the paint to the wooden base.

To perform the work you will need the following tools:

• Tassels good quality, different sizes.
• roller.
• Foam rubber.
• Spray can.

Coating technology:

• Painting begins on the inconspicuous side of the cabinet, which will allow you to fill your hand and determine how much paint to take on a brush or roller, and, if necessary, change the shade of paint.
• The front wall of the cabinet is painted.
• The second layer is applied after drying the first, after about three hours.

"Aging" the surface can be done in several ways:

• "Wrapping" or "scraping". For this:

1. paint is applied;
2. the coating dries up;
3. rubbed with sandpaper places where furniture wear is typical, for example, on handles, in corners. You can scrub to the primer or to the tree.

• "The effect of showing through the old coating." In this case, the product is painted in two layers: a paint of a different color is applied with a dry brush in the required places. In this case, the movements should be light, almost airy. This technique is called "dry brushing".
• "Effect of contaminated surface from time". This effect can be achieved by uneven coating of dark wax in places where the cabinet is touched by a person’s hands.
• An original and attractive technique - applying several layers of paint on top of each other. For example:

1. green paint is applied to the cleaned and pre-primed surface;
2. the next layer is bronze or gold;
3. the final layer is also green.

After the paint has dried, coarse sandpaper is taken and the surface of the cabinet is wiped with it. In this case, one paint should be visible through the other. After that, the surface is wiped with a finer sandpaper.

After obtaining a certain result, a thin layer of white is applied to the surface, which is diluted with water. The final operation is to cover the cabinet with a craquelure varnish.

How to protect the coating

The paint on the cabinet can be protected with a special wax that is used for wood. Wax is applied to the surface with an ordinary clean cloth, as in the photo, or with a foam rubber sponge. It is thoroughly rubbed and left for fifteen minutes before drying.

Wax is of two types:

• Dark. The composition falls into recesses, pits, various cutouts, which gives the cabinet an inimitable effect of antiquity. If they cover the entire surface instead of transparent, the cabinet will become a darker shade.
• transparent. This coating does not change the color of the product.

Tip: Waxing should be applied after the matte acrylic lacquer used in finishing. wooden surfaces.

Updating furniture with varnish is best done every six months. The updated and beautifully painted wardrobe will give the interior of the room a novelty and comfort.

3007 0 0

How to repaint a closet and give furniture a second life - practical advice and advice

Have an old Soviet locker and you don't know how to get rid of it? Do not rush to throw away old furniture, because it is easy to restore, update and make it look attractive. Read on to find out how easy and effortless to give your furniture a second life.

How to prepare a closet for painting

Updating old furniture is easy, as the market has wide range of paintwork materials and tools for their use. However, the result of furniture restoration will depend on 50% on how well it was prepared for painting.

Illustrations	Instructions for preparing wooden surfaces for painting
	We release from the content and parse. To simplify Finishing work, unload the cabinet shelves, and then remove the doors.
	Close up the cracks. Putty is used to fill cracks and dents in wood. Putty is applied with a spatula along the direction of the crack. We try to ensure that the thickness of the applied layer does not exceed 2 mm at a time.
	Create a rough surface. To provide better adhesion wood and primer, the surface of the furniture is treated with medium-grain sandpaper.
	Remove grease and dirt. Dampen a piece of thick cloth with the solvent and wipe the surface to pick up all the dirt and sawdust.
	Padding. Coat the sanded surface with a deep penetration primer.

What paint to paint the wardrobe

When choosing a paint, pay attention to the following criteria:

• Correspondence of paint to the restored surface. If you are going to restore wooden furniture, you need wood paint or universal option suitable for different materials;
• The texture of the painted surface. Among the range of paints and varnishes there are coatings with a glossy, semi-gloss, matte and embossed texture;
• Consumption. The lower the consumption, the less paint will go.

Illustrations	What to choose?
	Alkyd and pentaphthalic enamels. These paints are characterized by good hiding power, glossy or semi-gloss texture. The most common option is PF-115 enamel. Beware of fakes, as there are many non-original low-quality products among inexpensive enamels.
	Acrylic enamels. The resource of such coverage is not less than 8 years. The disadvantage of acrylic enamels high price compared to less expensive alkyd counterparts.
	Oil paint. Oil paints good affordable price. Otherwise, the coating is distinguished by a persistent toxic odor, prolonged drying and a short resource.

Cabinet painting tools

Illustrations	Tool and its description
	brushes. When choosing a brush for painting furniture, take into account its width and bristle length. The longer the bristles, the easier it will be to spread the paint evenly across the surface of the cabinet.
	rollers. The paint roller allows you to cover a larger area of ​​\u200b\u200bthe surface in one pass than can be done with a brush. Moreover, the roller paints evenly without any relief.
	Spray guns (spray guns). The advantage of a spray gun is a perfectly even layer of coating plus the ability to cope with staining faster than can be done using a roller.

wood cabinet painting process

Before starting painting work, wipe the surface of the prepared cabinet with a solvent.

When painting in two or more colors, we use masking tape, with which we cover certain parts of the furniture.

When painting the cabinet with a continuous layer, we try to cover as much as possible at a time more surface. We lead the painting tool in one direction, then it will be more likely that the coating will lie flat.

When working with oil or alkyd coatings, we ventilate the room. When working with acrylic enamels there is no special need for ventilation, as there is no toxic smell.

Painting a chipboard cabinet (preparation)

If several days have passed after applying the primer, the furniture is wiped with a rag soaked in a solvent. After that, the paint is sprayed in an even layer throughout the cabinet.

After complete drying of the first layer, the second layer is applied. As a rule, two layers of coating are enough for high-quality painting. After the applied layers have dried, a layer of varnish is applied, which, in addition to the decorative function, will serve as a protective reinforcing layer.

It is desirable to varnish any painted surface, no matter what texture is ultimately needed - glossy or matte. To get a glossy texture there is a glossy varnish, to get a matte texture - matte.

Painting kitchen cabinets

Paint kitchen cabinets you need the same as other furniture, but there are several features:

• For the convenience of restoration, the furniture will have to be moved to a larger room, since the kitchen is standard apartment close;
• Kitchen furniture is covered with a layer of grease and soot, so you need to pay Special attention preparatory work;
• Kitchen furniture has to be washed frequently, so you need to paint in several layers so that the coating is resistant to abrasion.

How to artistically paint a closet and make a gradation of colors

The alternation of similar or vice versa contrasting shades is popular when decorating. modern furniture made in a minimalist style.

Gradation of colors allows you to visually adjust the room. For example, changing the hue from light to dark from bottom to top will make the ceiling look lower. Conversely, the gradation from dark shades to light from the bottom up will make the ceiling higher.

Dot painting for polished cabinet

The painting on the surface of the cabinet can be detailed with an accurate drawing of the ornament. But for such decoration you need to be able to draw. If there are no artistic skills, you can do it easier and, as shown in the photo, apply colored dots with a brush in random order, so that in the end you get an interesting combination that will look harmonious from a distance.

Ideas for updating the closet

You can update the wardrobe completely by repainting it. But this is not the easiest solution, since all the old coating must be removed, and then applied with a primer, paint and varnish. There are simpler options.

The photo shows examples of chests of drawers covered with fabric

If there is no desire to repaint furniture or paste it with self-adhesive vinyl, why not as decorative coating do not apply cloth. Given the variety of fabrics on sale, it would be wrong to refuse to use such material for decoration.

The surfaces of the cabinet are covered with a layer of glue with low penetrating power. Then the fabric is stretched and smoothed over the entire surface.

Master class number 1: painting under the stencil

• Paint selection. For staining through a stencil, it is preferable to use paints with a semi-liquid and thick consistency. This will prevent spreading from under the stencil.
• The choice of brushes and roller. I do not advise you to work with a stencil brush, as smudges will not be avoided. Best result guarantees the use of a foam roller or a foam swab.
• Technologies and methods of painting. The stencil is applied to the surface of the cabinet. The swab is dipped in paint. Then the swab is applied with light pressure to the holes in the stencil.

Master class number 2: updating the cabinet from chipboard

Consider a simple guide to restoring a bedside cabinet.

Illustrations

Walkthrough

Old lacquered wardrobe - state before and after restoration Coloring process. Painting polished furniture is no more difficult than a regular cabinet. The secret is that all the gloss from the surface will have to be removed, and after that proceed to painting work. The remaining steps are standard, namely, applying a primer and applying a paint and varnish coating. Materials and tools. To work with polished surfaces, standard painting tools and standard paints and varnishes. The exception is a grinder with replaceable abrasive nozzles. Grinding a polished surface can be done by hand, but it will take a lot of time, so it is better to use a mechanical tool. decor process. When painting, you can not be limited to applying a single-color coating. Using masking tape, you can combine several colors and shades. Using stencils, you can apply decorative ornaments, using for this interesting combinations shades. Wallpaper or film. If you don't want to contact painting tool and you don’t want to waste time sanding, paste over the cabinet with self-adhesive vinyl or wallpaper. The use of wallpaper in general can be considered as an ideal opportunity to harmoniously fit the wardrobe into the interior of the room. Summing up Now you know everything about how to make an old closet look new. If you have any questions about decorating furniture, ask them in the comments to the article. April 26, 2018 If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!