How to update an old cabinet with your own hands. How to update an old closet: creative ideas
It happens that old furniture becomes unusable. You can use it, but appearance does not cause positive emotions. To extend the service life of the product, it is necessary to restore it. Before restoration old wardrobe, you need to decide on the set of tools, as well as the technique that will be used.
The components that will be used during the restoration of the product depend on the chosen work method. If you don’t have specific decorating skills, don’t despair – we recommend paying attention to the following types of work:
- painting the cabinet;
- use of craquelure varnish;
- Decoupage technique.
Painting
Craquelure
Even a teenager can carry out these methods of repairing a product. Restoring a cabinet with your own hands requires having an idea or choosing the style of the future masterpiece. To do this, you should turn to the existing interior: if it is made in a vintage style, the craquelure varnishing technique will do. If the interior is made in classic style– choose painting followed by applying an image. When the design of a room requires elements of romance - good decision will become decoupage.
Restoring a chipboard cabinet begins with repairing visible defects. To move on to decorating the facades and ends, you should carefully inspect the hinges of the product and check the integrity of the fittings. Open the cabinet and inspect the drawer mechanisms and check inner space for chips and holes. All noticed defects must be eliminated. This can be easily done with a hammer and nails, as well as by replacing faulty mechanisms with new analogues.
A universal list of tools for restoring an old cabinet with your own hands looks like this:
- sandpaper or sanding machine - to give the plane a flat and smooth surface;
- a screwdriver or screwdrivers along the diameter of all bolts - for possible adjustment of the product and removal of fittings before cleaning;
- spatula - for covering holes and chips;
- a paint roller and a narrow brush - in order to renew the coating;
- wood glue or PVA;
- set of screws for replacement.
Directly for the decoupage technique you will need napkins with a pattern or ornament, acrylic varnish, and a special thin synthetic brush with fan-shaped bristles. Also, restoration of an old cabinet requires the presence of a primer, wood putty, paint for painting, and masking tape. To use craquelure you will need a varnish of the same name.
It is necessary to immediately decide on the idea of restoration, because without an idea to do beautiful product will not work. Consult with your household and find out about their wishes.
Tools and materials for decoupage
Stages of restoration using painting
Before studying the master class on dyeing items for storing clothes, it is recommended to carry out preparatory work on wood. These include cleaning and sanding the old coating. It is important to achieve a smooth surface so that when painting the brush applies the composition evenly.
For small areas, use sandpaper to sand down large area– apply grinder. The final stage of preparation always involves using the finest grain sandpaper.
As soon as work with defects is completed, decorators advise moving on to primer. This stage is no less important than the painting itself. It is necessary to restore an old cabinet with your own hands with high quality, so the soil will great solution: it will hide all the cracks and fill the pores.
In addition, the coating treated with primer will absorb less of the coloring composition.
- After waiting for the product to dry completely, we restore the cabinet using paint:
- unscrew all the fittings that will prevent the brush from penetrating into narrow places;
- those elements that cannot be removed are sealed with masking tape to preserve their original appearance; for painting wood it is better to use special acrylic compositions – they fit better on a plane and create protective layer
- films. Pour the paint into the roller container and get to work;
- First we process all the internal elements: shelves, compartments, mezzanines. After this, we proceed to painting the facades, as shown in the photo;
- After the first layer has dried, apply a second, and if necessary, a third layer of paint. This is necessary to achieve color brightness and complete coverage of all gaps;
The dried cabinet must be opened with varnish in several stages. Restoration experts advise you to use your imagination and make the cabinet not in a single color, but add several colors to the facades. The simplest option is. To do this, use masking tape to cover some part of the facade and paint the remaining area a different color. For originality, you can decorate the cabinet in a contrasting design.
Removing old coating
Sanding parts
Chips are repaired with putty
Surface primer
Painting parts
Using craquelure
Coating technique wooden products A special varnish consisting of 2 components will allow you to transform an out-of-fashion cabinet. With its help, it is possible to create an old wardrobe that grandmothers used. To complete the work you will need PVA glue, craquelure, acrylic paint and varnish, wide brush.
The technique also does not require specialized talent; all manipulations are similar to conventional coloring. The algorithm of actions looks like this:
- preparation - the old product is sanded, if necessary, putty is used to seal large holes. The final stage of preparation will be a primer in several layers;
- coloring - for work you will need compositions of 2 colors: dark and light. They don't have to be in harmony - dark version is used to decorate cracks, and light color is used for basic coloring. Using a brush, apply a dark color, distributing it evenly over the surface of the product;
- craquelure - once the paint layer has dried, you can apply craquelure. This must be done quickly and preferably in several layers - the thicker the varnish, the more visible the cracks will be. Dry the product until your fingers stick slightly;
- second color - master class on craquelure at this stage suggests applying light color and wait for it to dry gradually. As soon as the coating dries, a characteristic mesh will become visible;
- applying varnish - a completely dried restored cabinet is coated with acrylic varnish to consolidate the effect.
When choosing craquelure, it is worth considering that if there is an image on the cabinet, you should not touch it. For this, a two-phase composition is used, the work with which is characterized by application in 2 stages.
This technique is suitable for restoring cabinet facades, but similar manipulations can be performed inside the product. Beautiful antique wardrobe will appeal to all lovers of vintage interiors.
Decoupage
Modern art stores will surprise any novice craftsman or amateur with an abundance of assortment of napkins and paper for decoupage. Napkins have a small format and are often used to decorate small items. In the case of a cabinet, they can be considered as elements for the design of drawers or mezzanines. Decoupage paper is available in large sizes, therefore it will be optimal for this type of work.
Before restoring the cabinet, select a theme for the product. These can be floral motifs, historical ornaments, images of people, heroes, or just vintage pictures. Decoupage consists of several stages:
- The surface prepared for repair is sanded and primed in several layers. After this, light acrylic paint is applied to create a background;
- at this stage apply paper materials to the surface of the cabinet, mentally coming up with the plot and location of each detail;
- Transferring a picture to a surface is considered one of the most difficult tasks. You can use the "file method" to do this. Prepare a regular office file, remove the top 2 layers from the napkin and place it face down on the file. Next, take a spray bottle of water and gradually wet the entire napkin. As soon as it gets wet, gently use your fingers to try to push out all the bubbles. If this is not done, wrinkles will be visible on the product. As soon as the napkin has become even and smooth, we apply it along with the file to the surface of the cabinet. Carefully delete the file and move on to the next step;
- using a thin synthetic brush and special glue, treat the surface of a napkin or paper in 1 layer;
- As soon as the napkin sticks and dries, you need to treat the surface with acrylic varnish. The photo shows options for decoupage of old cabinets.
Restored furniture gives the room fresh look– it looks original, non-standard. Such products will delight all guests, positioning the owner as a budding master of decor.
Elements that do not require restoration are covered with masking tape
Painting furniture elements
Glue the napkin
Applying clear varnish
Video
Photo
There comes a time when the furniture no longer harmonizes with the design of the room. The closet becomes a tasteless box and gets in your way. Bored furniture can be replaced or given a new style.
There are several simple techniques that allow you to update an old cabinet with your own hands. We will tell you how to repair vintage furniture or create it original item interior
Pasting with film or stickers
To make an outdated wardrobe fit into the updated design of the room, add ornate patterns of flowers. An unusual geometric pattern created using self-adhesive film will breathe life into old-fashioned furniture new life.
They are:
- standard: matte or glossy surface with a variety of patterns and colors;
- furniture for the facade, with a touch of wood or metal.
Step-by-step instruction working with self-adhesive film:
- Prepare the facade: clean from dust and stains with water and chemicals.
- Level the surface with plaster and primer.
- Mark the self-adhesive film from the inside out in advance, remembering to take allowances into account.
- Remove the protective layer from the inside by 2-4 centimeters.
- Stick with sticky surface to cabinet
- Using a rag and putty knife, smooth out the sticker.
- Carefully remove the protective paper.
Beautiful pictures will create a positive atmosphere in the room
Watch for bubbles to appear. To avoid their occurrence, attach the sticker carefully, straightening the film.
On a note. If the bubbles that appear do not smooth out, pierce them with a needle.
Photo printing and photo wallpaper
The technique is suitable for restoration kitchen cabinet or buffet. Photo wallpaper can be purchased at the construction department or contact a printing house.
Printing centers will help:
- enlarge the image without losing the quality of the picture;
- make a collage of several photos or pictures;
- apply an image to a film for gluing to a specific type of surface.
Toning
Changing the color of the facades can decorate boring furniture. Tinting instructions wardrobe:
- Clean the surface from dust with a dry cloth.
- Also treat the inner walls with an antiseptic (vinegar will do). He will get rid of musty smell.
- Use wood putty to remove defects. The color must match the details.
- After the composition has dried, sand it sandpaper treated areas.
- Coat the cabinet with a texturizing wood stain. It should be darker than the color of the furniture.
The tinting technique is suitable for decorating a cabinet in the bathroom, kitchen or hallway.
Remember that this method is only suitable for natural wood surfaces.
Slate surface of doors
This type of decoration is becoming increasingly popular. Doors from slate board, on which you can write or draw.
Before and After - transforming an ancient chest of drawers
There are 3 ways:
- Pasting slate film to the door or facade.
- Buying a finished board.
- Coating the door or inner wall with special paint.
Painting technique:
- Sand out any rough edges and scratches.
- Apply two coats of primer.
- Using a roller, treat the surface with slate or chalk paint.
- After drying, apply a second coat.
Your cupboard or buffet will shine in a new way.
Mosaic decoration
Decorating with various small details will help create an art deco atmosphere. Finishing base:
- pieces of multi-colored glass;
- ceramics;
- shells;
- beads;
- sea pebbles;
- artificial flowers.
You can attach the elements to the cabinet with colorless rubber-based glue.
Expert opinion
Victoria Chernikova
Decorator
Before starting work, draw a sketch of the future composition. Place elements on a flat surface for visual representation. This way the drawing will turn out neat.
Mosaic decor will add brightness and elegance to the interior. This design is suitable for any cabinet if the style of the furniture matches the design of the room.
Aging
Cabinets painted with a dry brush will look elegant, leaving behind only part of the paint, creating the effect of time (only for wooden furniture).
Artificial aging method:
- Paint the surface a color that is several shades darker than the original color. Choose the shade accordingly color scheme rooms.
- Wax some areas. You can use a regular candle.
- Paint the cabinet in light shade: for example, cream or beige.
- Wipe the surface with sandpaper, so abrasions will appear.
A simple way to give a cabinet an antique look is to use craquelure. The varnish of the same name is applied to the surface. After drying, small cracks appear on the facade paint.
Kitchen drawers aged with craquelure
Decoupage
The peculiarity of this design is a smooth transition from the design to the color of the cabinet.
Use patterned napkins as materials for decoupage, this way you will create the feeling of painting on furniture. The composition can turn out clear, with watercolor gaps.
To decorate the closet:
- cut out the image or use the entire napkin;
- divide it into layers;
- glue the picture;
- coat the dried surface with varnish.
Decorative rivets
To add old furniture brutality, can be attached to the closet metal parts. For lovers of loft design or stir-punk, it is recommended to decorate the cabinet doors and facade with rivets or nails with decorative heads. Even with such accents standard furniture from IKEA will look like pirate chest with treasures or a cabin on a ship.
Glue the metal parts to the facades. If the surface is covered with leather or thick fabric, you will need nails to carefully attach everything. Combine metal hardware with other decorative techniques (paint or fabric) for a personal touch.
Inlay
This is not finishing precious stones, and decorating furniture with overhead elements:
- vinyl napkins;
- embroidery;
- lace
Currently, in stores you can find an endless number of all kinds of cabinets, chests of drawers, racks, hanging shelves, multifunctional drawers for clothes and personal items. But if you decide not to plunge into a long search, but to follow the thread of your imagination, then with the help of the following master classes you will learn how to update an old cabinet with your own hands beyond recognition.
After reading the article, you should not have any questions about how to paint varnished, chipboard or wooden cabinet , what paint to paint and make it suit your own style, and you will also learn some of the intricacies of this work.
- Painting- This is the most reliable and capital method.
- Wallpaper, self-adhesive film and decoupage- when choosing this method, remember that it is not durable!
- Covering with fabric and decorating with carnations - also
Most best method To update any chipboard or wooden cabinet, of course, painting is not as expensive as it seems at first glance and is quite simple to do.
Painting a wooden cabinet made of chipboard
Paint selection
- For processing wood and chipboard you can use alkyd or acrylic,
- spray or regular wood paint,
- for deeper coloring - varnishes, but most often preference is given acrylic paint m.
They are non-toxic and dry when room temperature, which in our case and when painting home furniture is very convenient, is presented in stores in the widest range, they can be colorful b, i.e. dilute with white paint, achieving desired color. In addition, there is a choice of acrylic paints with a mother-of-pearl effect or, for example, metallic.
Aerosol acrylic paint adheres better to surfaces than regular paint, creating a smooth, evenly colored texture. It is easy to work with both a professional and a beginner.
- Varnishes are used mainly to give furniture an antique look., but well-groomed, noble and rich. In this case, the surface is painted several times after each layer has completely dried.
- Varnishes are also necessary to fix the color and protect the surface from scratches and minor damage.
- You will need varnish even if you decide to paint the chest of drawers in an antique or Provence style.
Selecting Brushes and Rollers
After choosing the paint you should Special attention pay attention to brushes and rollers. Why shouldn't you save on painting supplies if you decide to update your chest of drawers yourself?
- At the right technology processing old surface and good painting of the cabinet will be maintain its appearance for several years.
- If you use bad brushes, you will not protect freshly painted furniture from sticking hairs or lint, which is almost impossible to fix unnoticed.
If you have a task to paint a large smooth surface, then for work Both a roller and aerosols will do.
ATTENTION: During work, do not leave the brushes dry, it is better to put them in a jar of water, otherwise they will quickly become unusable
Technologies and painting methods
Don't forget about the other important ones painting tools and materials such as sandpaper or sander, primer, putty, solvent and varnish. All this is necessary to comply with the correct dyeing technology.
Equipment:
- Sandpaper of different types grain size is needed for preliminary rubbing of the old paint layer and sanding the surface.
- Primer will be needed for sealing small cracks on the surface of wood or chipboard.
- Putty (you can use car putty) and a putty knife will come in handy if there are deep scratches or chips.
- Solvent or white spirit is needed to degrease the surface before painting for better impregnation.
- The varnish performs a protective function and gives the furniture shine.
In general, preparing a cabinet for painting consists of: 5 short but very important stages.
- To begin with, carefully remove old paint and use medium-grain sandpaper(or machines) level the working surface.
- All dust must be brushed off, but without using wet rags or sponges etc. Otherwise old paint It will only be absorbed better, but the new one will not fit well.
- After processing with the finest grain degrease with white spirit(acetone) and apply a primer layer for better adhesion to the paint.
- If there are large chips, then first fill them with putty and rub them until smooth. Afterwards we apply one or two layers of primer.
When you know all the stages of preparation, it’s time to move on to the main stage and figure out how to paint a wooden chest of drawers and chipboard.
Master class No. 1. Stencil painting
Everything is mixed in this closet - romanticism, Chinese motifs, and even something from Gzhel. Everyone sees something different in him. Let's learn painting techniques.
Materials and tools
- Prepared cabinet;
- white paint;
- solvent;
- blue spray paint;
- gold paint;
- stencil;
- brushes
Step by step guide
Step 1.
- We remove all fittings, locks, handles, etc. from the cabinet. Using familiar technology, we will prepare a wooden cabinet for painting.
- On work surface(on the floor) spread newspapers or a large piece of polyethylene so as not to spoil other furniture.
Step 2.
- Take white enamel and solvent. In a small plastic jar We dilute the paint and solvent according to the instructions on the paint can.
- The paint consumption is also written on the can, it is better to use this information and dilute it immediately required amount. If you mix too little paint, you may end up with a different color the second time.
- Making the background of the picture - apply the first coat of paint. Leave until completely dry.
Step 3.
- If the color is saturated and you like it, then take the stencil and place it on the cabinet. Carefully glue it to the front side and side walls so that there are no bubbles.
- Shake the spray paint well and spray it over the stencil. For an even color, one layer of blue paint will be enough, so we do everything the first time.
Step 4.
While the blue paint dries, painting the fittings, taken from the cabinet, in gold leaf. After the parts have dried, screw them into place.
We remove the stencil from the cabinet and place it in the most visible place in the room - after all, it now deserves special attention!
You can decorate the closet with a stencil, for example, with flowers.
Master class No. 2. Updating a chipboard cabinet
This cabinet looked very cheap since it was made from chipboard. But we updated it with a beautiful ornament for a children’s room, now it can fit into even a high-tech or modern interior.
Materials and tools
- Prepared cabinet;
- white paint;
- pencil;
- building level;
- sponge brush;
- masking tape;
- additionally: protective paint(enamel).
Decoration process
Step 1.
- Let's prepare the furniture by cleaning surfaces from roughness, chips, cracks using putty and primer.
- After use special means need to give allow surfaces to dry completely.
- Take masking tape and stick it on the front side of the chest of drawers according to your individual idea.
- We make combinations of triangles along the top and bottom edges, rhombuses in the middle, rectangles at the top and bottom. We cut off the strips and make shapes from them, as shown in the photo.
- We make a rhombus by cutting strips of equal length and placing them perpendicular to each other.
- To make rectangles, first stick the tape evenly, parallel to the cut of the chest of drawers, and using building level and pencil, mark equal intervals. Cut through one.
TIP: Watch the placement relative to the fittings (handles, locks) and the gaps between the drawers - it’s better to be symmetrical than even.
Step 2.
Step 5.
The final stage is the application of protective enamel. It will extend the life of the chipboard cabinet and protect against small mechanical influences such as moisture and dust.
And so stylish wardrobe ready for active use!
Color options can also be the same as in the photo below.
Master class No. 3. Painting a polished cabinet
Some people can’t believe that you can make such a piece of vintage-style candy out of an old polished cabinet, without losing functionality. And then we'll tell you how to do it.
Materials and tools.
- Old polished cabinet;
- vintage paint (regular acrylic matte);
- white spirit or acetone;
- brushes;
- sandpaper or sanding machine;
- gold handles for drawers.
Painting process
Step 1.
Despite the fact that we are creating a vintage effect, there is no real need for the dresser to look shabby. Therefore, we carefully prepare it for painting.
- To do this, we remove all the old fittings and sand the entire surface of the chest of drawers. First we use coarse sandpaper, then fine-grained sandpaper.
- It is not necessary to putty and prime, except for serious chips on the surface. Degrease the surface with white spirit or acetone and let it dry.
TIP: Since the paint will be applied in several layers, it is very important that it is well absorbed into the wood.
Step 2.
- Apply the first layer of paint. Very thin, you don’t have to try too hard and leave unpainted areas.
- Sand the first layer with fine-grained sandpaper. We clean off dust, but do not use wet rags, sponges, etc. in the process. Wash only with a dry cotton lint-free cloth.
- Next, apply a second layer of paint, also rubbing it in. Let it dry and rub it in a little again.
- We repeat this until the color becomes even, but a little rough. For this we used matte paint with a vintage effect. After a few days, it will be completely absorbed and dry and begin to turn yellow (pay attention to the instructions on the can so that you don’t have to repaint everything again later). To avoid this, you can try this coloring method on a small and inconspicuous area. Proceed with full coloring when you are satisfied with the result.
If you bought new handles, check if they match your color and screw them into place. Golden brass carved handles with patterns match the white aged chest of drawers.
Check the chest of drawers to see if it meets your requirements - it is still comfortable, beautiful, and, paradoxically, modern. Vintage is in fashion now!
Wallpaper or film
Using film or any other material to update the cabinet paper covering, it should be remembered that we use the closet every day. And usually such a coating does not last long, but it is very simple to implement.
Fabric covering
This is the most painstaking way to update a cabinet, when fabric is stretched over the entire plane. The method is quite outdated. But maybe someone will like it.
Spot painting for polished cafe
Spot painting is perfect for a polished cabinet. In this case, there is no need to remove the varnish and sand the surface. The technique is simple:
- Drawing using a marker
- The marker is painted with paint using dots. Details - here.
Closet Update Ideas
What can you make from an old closet? There is no need to rush to throw it away or give it away. Let's take a closer look at some options with cabinet use ideas.
Desktop
From the walls of the closet you can construct a desk for children. And use the shelves to make closed drawers for the table. Then carefully connect everything and clean it with sandpaper. Next, apply several layers of wood varnish.
Important! Let the first coat of varnish dry thoroughly before applying the second.
Cabinet
Make a versatile bedside table out of an old closet. So new piece of furniture will always come in handy. After all, you can put in it any accessories that will always be at hand. Drawings with patterns will add originality to the cabinet. To make the cabinet look more comfortable, place it on top flower plant in a pot.
Taping or painting the cabinet
Updating an old cabinet and giving it a second life is very simple. The main thing is to choose the right material for gluing. Self-adhesive wallpaper will do.
Reference! Before gluing, you need to temporarily unscrew the handles on the cabinet, then you will get an amazing effect.
If you decide to paint the part, then choose a varnish or special paint to match the color of your apartment interior. The assortment in hardware stores has a wide selection for every color and taste.
Important! The style is given by two types of painting. Recommended, for example, in the form of black and white, etc.
Shelf in the garage
Depending on the size of the old cabinet, you can make your own shelf of any size for the garage. Since the garage almost always has a lot of different tools scattered in the corners, a shelf is needed for them. Assembling the shelf takes less than an hour.
Sideboard
The sideboard is made in several stages:
- Make an ordinary rectangular bedside table and screw the light rear half of the cabinet to the back on both sides. And for greater beauty, add a mirror with holders along the edges of the outline.
- In a cabinet with inside attach two slats for the shelves.
Floor stand for flowers
The stand can be made of any shape. The ideal option is in the form of a square pyramid. Much more can fit on this stand. flower pots. Geometric shapes are the fashion trend of the 21st century. Originality without repetition. It is unlikely that you will be able to find and purchase such a stand in a store.
Important! The bottom square should be stronger and more stable, because the main weight of the flower pots and pyramidal subsequent structures will press on the bottom.
Potato box
Most quick way Making such a box from an old cabinet is suitable for storing large amounts of potatoes. Simply place the cabinet on the back wall, open the door and add the potatoes. If you need a much smaller size, then disassemble the old cabinet and assemble it from the walls regular box. To add beauty, you can design a lid with a lock or latch.
Soft ottomans for the hallway
Remove the shelves and connect them together to make a square. On top part put foam rubber to size and cover it with fabric. The walls of the ottoman can be painted in any suitable color.
In our article we will tell you how to perform restoration of an old cabinet with your own hands, we will present photos and drawings. During the renovation, you will gain an irreplaceable experience, and you will have an exclusive designer element of decor in your home.
Almost everyone in their household has a polished cabinet that has lost its former appearance, but has retained its functionality. You can easily give it a completely new look and fit it perfectly into the interior. You will need a few tools, finishing materials from any building materials store, imagination and a few hours for creativity.
You need to start by determining the style of the future cabinet and making sketches on paper. The creative plan will greatly depend on the scope of the restoration, either to change the cabinet radically, or simply update the facade (correct the punctuation).
In contact with
Classmates
We update the cabinet in the most common way: painting
You can easily and quickly update your cabinet by simply replacing the covering - even a beginner can do this. You will need to completely clean the cabinet from the coating, and then cover it with a new one and change the fittings. If there are deep damages on the surface, they can be covered with a mixture of glue (PVA) and sawdust (the consistency is selected “by eye”).
Tools that may be useful in your work:
- skin;
- Sander;
- paint brush and rollers;
- screws and bolts;
- accessories;
- screwdriver.
Materials required for work:
- solvent;
- Galosha gasoline (petroleum-based solvent);
- primer;
- putty;
- paint (nitroenamel NTs-132, NTs-25);
Basic steps:
Having collected necessary tools and materials, restoration can begin. It takes place in several stages:
1. Analysis. Use a screwdriver to unscrew all handles, shelves and doors. Consider whether old elements and fasteners will be used, or only new ones.
2. Cleaning. It is necessary to clean the furniture from dirt and dust, and then from unnecessary coating. The paint layer from the surface and fittings is wiped off with a solvent, and then degreased with Galosh gasoline and left to dry completely.
3. Using grinder, in other words, give the surface of the cabinet a smooth shape. If there is damage, you need to use putty to disguise it. Then thoroughly coat the entire surface with primer and let dry. When choosing a primer, pay attention to its compatibility with the future paint color. After complete drying, sand all surfaces with fine sandpaper.
4. Painting.
Good to know: best choice The cabinet surfaces will be painted with wear-resistant grades. You should start painting from the most distant areas ( back wall, bases, shelves), thin layer. Depending on the author’s idea, the cabinet can be covered in one general tone, and then details, patterns can be glued on, or it can be made multi-colored (each element of the cabinet can be painted in its own color and shade).
5. Assembly. The final step is assembling the “new” cabinet and attaching the fittings. We carefully attach all the elements of the cabinet back to their places: handles, locks, hinges. The best option For the cabinet there will be handles that were decorated by hand according to the author's idea.
The fastest and cheapest method: self-adhesive film
Another inexpensive and quick way to update a cabinet is with self-adhesive film. The first thing you need to do is find a high-quality self-adhesive film for vinyl based. It's easy to find on construction markets or construction supermarkets.
The design can be anything you choose, the main thing is that the end result has a decent appearance. Vinyl films are well tolerated high temperatures, do not allow water to pass through. To work, you will need a minimum of tools, film and a little patience.
We will need the following tools for our work:
- roulette;
- stationery knife;
- scissors;
- ruler;
- scraper;
- film.<
Take note: Treat large and smooth cabinet surfaces with a roller, and corners and irregularities with thin brushes. After the paint has completely dried, apply a clear varnish.
Basic steps:
The entire process of updating the cabinet with film is carried out in several operations:
1. We take measurements from all surfaces of the cabinet: facades, sides and drawers. For convenience, you need to unfasten the facades and place them on a horizontal plane, unscrew the handles and fasteners.
2. We completely wash all dirt from all parts, paying close attention to greasy stains. The surfaces should be perfectly flat, clean and smooth. If these conditions are not met, then in the near future the film will peel off and swell.
3. The film has a protective layer on which centimeter markings are printed. It makes cutting it much easier. It is better to transfer the dimensions onto film with a margin of one or two centimeters (the excess can be easily removed with a knife). Please note if your pattern on the film is repeated so that it matches the adjacent surfaces. We cut the film onto flat surfaces with a knife and a ruler, and into shaped areas and corners with sharp scissors according to a pre-prepared template.
4. Peel off two centimeters of the film and apply it to the part. Do not apply glue to the film all at once, but gradually section by section, leveling it with a scraper and removing air. If small bubbles form, do not panic; you can simply prick it with a sewing needle and expel the air.
5. After gluing all surfaces, the cabinet is assembled. For a deeper remodel, you can replace the old fittings with new ones.
In this way, you can partially restore cabinets by adding a couple of bright inserts only to the facades, or completely cover all visible surfaces. Vinyl films can easily withstand wet cleaning with detergents.
Creative ideas
You shouldn’t stop at just the above methods. Creative people have long come up with inexpensive options for alterations and are willing to share.
- you can change the color of the cabinet surface not only with paint and a special film, but also with the help of fabrics, leather, ceramic tiles;
- plastic, glass, and patterns of contrasting colors can be used for decoration, as a bright accent on the cabinet;
- for a more artistic image of the cabinet, you can use photo printing, hand painting or.
As you probably already understood, the process of updating a cabinet is applicable to both kitchen and sliding wardrobes. The process is simple and fun, and the result is a unique piece of furniture to suit your taste and color. Any updated item made on your own will add comfort and positivity to your home.
We invite you to watch an interesting video about how to give an old cabinet a new life:
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!