How to make a vacuum pump at home. Do-it-yourself pump for penis enlargement - how to make, instructions

Vacuum has been used not only in industry, but also in domestic conditions. Almost everyone uses a regular pump to inflate the wheels of a car or other vehicle, but a vacuum pump is not so often used yet, many consider it special and applicable only in industrial scale. Since the device is expensive for domestic use, many people want to make a homemade vacuum pump.

Before you make a device, you need to understand its operation. Almost all consumers deal with vacuum packaging on a daily basis and know what it is. They are presented in the form of a cellophane product, in which products are perfectly preserved without drying out. In the simplest packages, air is squeezed out manually, while more complex ones involve the use of a working mechanism. Thanks to a homemade device, you can create a vacuum in any package, although the package will need to be sealed.

Vacuum packaging is also used to store clothes, since the volume is reduced, and all things can be placed in a bag or suitcase. Especially common the use of the apparatus in industry for the following purposes:

• Use for the production of bags and on packing tapes;
• Distillation chemical, drying chemical drug and compression of a gaseous substance;
• Fish or vegetable cleaning, food processing;
• Printing uses compressors in printing and converting machinery;
• Use in environmental cleaning devices:
• In medical breathing apparatus and dental equipment.

The use of vacuum for wood processing and giving it aesthetics is common. To do this, the wooden product is impregnated with oil, and to speed up the process and be more efficient, the wooden object is placed in the chamber, and air is pumped out. At the same time, the internal pressure of the wood pushes the air out and sucks in the oily substance.

Air extraction process

At detailed analysis process, it can be understood that the difference in the technology of injection and pumping out is insignificant, since it is worth deploying the air flow, and pressure pump immediately becomes a vacuum. The peculiarity lies in the more thorough sealing of the device when pumping air or liquid. An inlet valve filter may also be required to prevent debris from entering.

The overall operation of the mechanism can be described by two process cycles:

1. When air is sucked in, a vacuum is created in the chamber, while the intake valve opens and the exhaust valve is sealed. The sampling chamber achieves maximum air volume and low pressure.
2. During the reverse action of the mechanism, low pressure is maintained at the inlet stroke, the inlet valve closes, after which the exhaust valve opens and air is expelled. The pressure in the selection chamber is normalized.

This type of process applies only to reciprocating and membrane devices, and in rotary systems, air moves with the help of blades into the selection chamber, while the inlet and outlet valves open in stages.

Types and homemade analogues

There are many varieties of vacuum pumps and their analogues, but all pumps are divided according to the type of working part:

1. Lamellar-rotary (oil and dry).
2. Vortex.
3. Piston.
4. Membrane.

The most common are piston and membrane, as well as membrane-piston, which can be special efforts do at home.

For manufacturing from scratch, you will have to face many difficulties, however, you can simplify the task. For example, a vacuum pump from a car compressor is easy to do with your own hands. And there are other units suitable for rework. For this it can be used:

• Refrigeration compressor;
• Aquarium Air Compressor;
• Manual bicycle pump.

It is necessary to choose and improve the design of the future device depending on the nature of the application.

Vacuum pump manufacturing

For fast manufacturing you can use a medical syringe. Such a device is considered the simplest and budget option. The syringe is the most accessible item.

Creating a syringe

To create a device you will need:

• Elastic band from a dropper - creating a compartment with a valve.
• Syringe 50 cc - for use at home it will be more than enough.
• A steel ball from a small bearing acts as a valve. The ball should fit freely inside the outlet constriction of the syringe, which is usually worn with a needle.
• PVC tube - you need to choose a rigid, pressure-resistant one. The drip tube will not work.
• Steel sewing needle.

To begin with, the plastic inserts are removed from the gum, and the gum itself is cut in half. Further, half the length is cut off from the narrow part of the gum. Now a piece of narrow rubber product must be inserted into the nozzle of the syringe, and pushed with a long object until it is completely sealed. A ball is installed as an inlet valve and supported by a second piece of rubber with a narrow end so that the ball remains free to move.

Opposite the ball valve, a hole is burned with a heated needle, which will act as an exhaust valve. To complete the assembly, the remaining rubber ring is put on the spout so that it covers the outlet. It is better to fix the ring using superglue for this.

The do-it-yourself vacuum pump for pumping air is ready, and you can check it by putting one end of the tube on the nozzle of the syringe, and fixing the other in the lid plastic bottle using the plastic insert removed earlier.

Auto compressor tool

For the manufacture of the pump, the compressor can be redone, by doing the following:

1. Remove the sleeve cover and remove the stem on which the cuff is fixed;
2. Unscrewing the fixing screw, disconnect the cuffs;
3. Fasten the cuff, while turning it upside down;
4. Pre-prepared reverse plastic valve connect to the injection tube, which will now be used as a retractor;

When working, it is important to install the valve correctly so that it passes air. Further, a rigid tube is attached to the free part of the valve, which will withstand the influence low pressure. The device can be used for wrapping clothes or deflating food containers.

Refrigeration pump

The refrigerator compressor is great for a homemade vacuum cleaner, but to convert it into a full-fledged working device, it takes a little effort:

1. Cut with a hacksaw upper part compressor covers;
2. Inside is a motor connected to the housing by springs, which must be removed. Connect the inlet and outlet copper outlets with an oil-resistant tube.
3. Manufacture of a cover for the case. The new cover must be made of brass material. The diameter should be smaller than the diameter of the compressor housing, and it is also recommended to provide the cover with a piece of linoleum as soundproofing material. If the connection of the cover and the body is quite tight, then the pressure inside will be equal to atmospheric, but if desired, a breather can be installed.
4. The future vacuum pump from the compressor from the refrigerator will be like an oil pump, and the oil level will constantly decrease, as it will be sprayed and exit the discharge channel. Therefore, it is recommended to control the oil level, and therefore it is necessary to install a level gauge. As such a device, you can use a transparent shell ballpoint pen, which is connected to the compressor through a piece of oil-resistant tube. It is not necessary to completely screw the housing cap: air must pass through.
5. This type of oil device must not be exposed to moisture from the inside, so a filter must be built in front of the inlet. For this you can apply air filter car, but if the air humidity is very high, then it is necessary to install a receiver and a sump.
6. A filter is connected to the discharge channel - an oil catcher, in which there is a drain plug.

At the end of the work, a pressure relief valve is installed in front of the oil catcher. As such, an electro-pneumatic valve connected together with a motor can act.

Alteration of the aquarium compressor

An aquarium fixture is quite practical to make an air evacuator. The device for supplying air to the aquarium does not require major changes, but only a change in the valve system. For this you need:

• Disassemble fasteners;
• Dismantle check valves;
• After dismantling, change the valves in places;
• Fold the structure and fastening system.

To prevent moisture from entering the device, it is necessary to create a small hole in the case or install a dry filter.

Device water ring mechanism

This option is an inefficient type of equipment. It is based on a body and plates fixed in the rotor. Immersed in liquid, the plates displace it, and at the same time air is pumped out with an efficiency of up to 95%. When replacing fluid with greater density and providing cooling, the indicator increases.

One of the advantages of this unit is long term operation, but there are some disadvantages:

• It is necessary to dispose of or recycle the working fluid;
• Constant consumption working fluid and the need to replenish it;
• The working fluid is heated, thereby increasing the vapor pressure. Therefore, the liquid must be cooled.

Assembly of the water ring apparatus can be done in several steps:

• Preparation of a cylindrical billet for the body;
• Install the impeller on the shaft into the casing. The wheel is equipped with blades, slightly smaller in diameter than the inner diameter of the body.
• It is necessary to ensure the supply of water to the housing. Under the influence of water, a wheel with blades should rotate, as a result of which centrifugal force is formed and a vacuum is created in the device.

This setting can be applied to agriculture, for a private home or in industry.

Changing the operation of a bicycle pump

From a simple cuff pump, you can quickly and easily make the necessary device for pumping air. Such a device is widespread, as cyclists, car owners and motorcyclists use the pump. The peculiarity of use and the process of alteration remains practically unchanged, in comparison with cuff devices.

Step-by-step creation of a vacuum cleaner:

• Unscrew the main nut and disassemble the pump;
• Unscrew the fastening screw and turn the cuff in the opposite position;
• Assemble the unit in reverse order;
• Install valve between pump and hose.

After making such changes, you can pump out the air from the can or other container, and the valve of the aquarium compressor can be used as a valve.

During operation, malfunctions and various breakdowns may occur in the compressor, but when studying the design, you can independently carry out repairs without the involvement of specialists. When creating a degasser, it is necessary to have the source material, and the complexity of the work and the scope of the apparatus will depend on the type of material. Using complex structures vacuum pump it is better to use sedimentation tanks and receivers to extend the life of the unit.

For a member with their own hands. What is this device? What is it for? What is required for its preparation? Let's take a closer look at these issues.

Indications for use

The pump (or vacuum pump) is modern fixture cylindrical shape, designed to improve quality sexual life.

There are several indications for its use:

1. The need to increase the volume or length of the penis.
2. Partial or complete lack of erection.
3. Insufficient degree of elasticity of the penis during intercourse.
4. Impotence.

The principle of operation is that the device creates high pressure in the groin area of ​​a man. This leads to increased blood flow, stretching of the cavernous bodies and, accordingly, to an increase in the penis. Finished equipment can be bought at a price of 3000-5000 rubles. It is much more profitable to create a vacuum pump for a penis with your own hands.

Preparing to create. Flask

To prepare a manual pump for penis enlargement with your own hands, you will need three main blanks.

The flask is the device in which the penis will be placed during the "training". It is recommended to purchase a cylindrical beaker from a pharmacy or health supply store. If there is no opportunity to buy it, then you can use improvised analogues:

• The outer component of a large syringe, freed from the needle and inner rod.

• Empty bottle. It requires making a hole for the penis on one side and a small incision for the tube on the opposite side.

• Many men find it ok to use an aerosol can right size. But it is not recommended to do this due to the environmental factor.

When creating a flask, you need to remember that its size must correspond to the length and volume of the penis. Otherwise, the man will experience discomfort. Before manufacturing, it is required to check the integrity of the structure, it should not have cracks and other damage that can lead to injury. There should be no corners or roughness on the surface of the flask. It is worth remembering about ensuring tightness, without which the desired effect will not be achieved.

Creating a compactor

important detail when creating a do-it-yourself pump for penis enlargement, a sealant is used. It is necessary in order to create a vacuum in the flask.

As a seal, you can use a regular clamp, which will later be covered with a pump. If the house has an old non-working vacuum cleaner, then you can use an electric pump from it.

Important. The seal, as well as the flask, must correspond to the width of the penis. First you need to measure it with a centimeter. If you make it small, then discomfort will occur during the exercise, if it is large, then a vacuum will not be created, respectively, the desired effect will not be achieved.

Creating a handle

The last component needed to create a do-it-yourself vacuum pump for penis enlargement is a pen. Ideally, you should disconnect the hose from the old-style tonometer. With the help of a pear, you can easily pump out excess air from the flask.

It is worth noting that a similar device for creating a vacuum in closed container sold separately in some health supply stores. It is ideal for the implementation of the plan.

It will be more difficult to use a hose that fits over the base of the bottle or syringe. Air will need to be pumped out by mouth, syringe or small pump, which will cost a lot of effort.

Preparation for work

The penis is the most delicate part of the male body, consisting of many soft tissues. It's pretty hard to damage it. Therefore, before you start figuring out how to make a pump for a penis with your own hands, you need to start preparing each part for assembly.

First of all, it is required to study the surface of the seal and the flask. There should be absolutely no sharp corners, cracks and rough surfaces on it. Any, even the smallest irregularity can cause irreparable harm to health.

Second important point - right choice material. It is important that it does not cause an allergic reaction on the skin. Otherwise, instead of the elasticity of the penis, the man will get irritation and itching.

The third detail is the mandatory processing of the main mechanisms. It is required to wash the seal and the flask with a sterile solution or soapy water. Then they need to be dried and additionally treated with alcohol.

Having ensured all the components are sterile and safe, you can proceed to the main stage - assembling the device.

Assembly process

So, all the details are ready for work, now you can move on to the main question, which is how to assemble a penis pump with your own hands. This procedure consists of several basic steps:

• You should pick up a clean flask and make a small hole in the upper part, put a tube in it, which will play the role of a valve. It is necessary that it tightly closes the hole and does not allow air to pass through it.

• A clamp is required to be attached to the base of the flask. In size, it should correspond to the base of the penis. Additionally, you can sheathe it with a soft cloth for more convenient use. As a connecting element for connecting parts, it is required to use a sealant. It is recommended to apply it in a thin layer.

Your DIY penis pump is ready. But do not rush to try it out in action. It is necessary to allow the product to dry completely for 2-3 days, only after that you can proceed to the correction of male dignity.

Important Points

The size of manhood matters when building relationships. That is why representatives of the strong half of humanity often decide to create a pump with their own hands to increase the penis in length. Many "masters" make mistakes at the manufacturing stage. It is worth talking about some important points.

Many men have been injured due to the wrong size seal. When a vacuum was created by the device, the base of the penis was damaged or the testicles were sucked into the flask. It is very important to measure the width of the penis and make the seal ring 0.5 cm larger.

Difficulties arose with the use of a bottle as a flask. The plastic container squeezed the head during an erection, and the glass container was damaged when the pressure in it increased. It is more efficient and reliable to create a penis pump with your own hands from a ready-made flask or syringe.

In some cases, the device did not work at all. A vacuum may not form in two cases:

1. The use of a narrow hose, which begins to squeeze during the pumping out of air and stops passing it. The recommended diameter is 2-3 mm.
2. Poor fixing of the hose in the hole. Be sure to use sealant.

Subject to all the rules, it will be possible to create an excellent device for penis correction, which will delight a man for a long time.

Advantages

A penis pump is created in exactly the same way in width and length, since the principle of its operation is to increase blood flow and stretch the cavernous bodies. Why is it worth making it yourself, and not buying it in a store?

Of course, only in order to save money. If the finished product costs more than 3,000 rubles, then you can create a device with the same method of operation absolutely free of improvised means or spend a small amount on the main components - up to 500 rubles.

disadvantages

Drawbacks in creation homemade device more than merit. First of all, they are associated with the complexity of the process. Not every person will be able to create a safe device that allows you to achieve the desired effect, which would meet sanitary and hygienic requirements and would be suitable in size.

The second disadvantage is aesthetic. The finished device looks much more attractive.

And, of course, the principle of operation is a little more complicated. In a sex shop you can buy a mechanism with automatic control. Just press the button and you can enjoy the process. At home, you can only create a handheld device.

Terms of Use

Separately, it is worth mentioning the issue related to the use of a corrective pump for a penis:

1. The penis must first be treated with a lubricant.
2. It is carefully required to introduce it into the flask through the seal.
3. It is necessary to pump out all the air from the tank with a pear.
4. The hose must be secured with a clothespin to create a fixation.
5. In the flask, the member should be within 30-40 minutes.

Important: contraindications are any diseases of the reproductive system. If discomfort occurs during operation of the device, then you should unhook the clothespin from the hose and carefully remove the flask.

Nature has not awarded a large penis? Over time, he became not as resilient as in his youth? Has the erection disappeared or the first "bells" of impotence appeared? If there are such problems, then you should think about how to create a pump for a penis with your own hands. A simple device will allow a man to always stay in shape and delight women at no cost.

In industry, vacuum devices are needed to remove large volumes of air and gas. However, this method has found application in everyday life, although not so long ago. Such devices help store food and things, marinate meat, pump out gas, as well as liquid. They can be easily purchased in stores, but they are not cheap. Exist Alternative option- make a vacuum pump with your own hands.

In industry, vacuum devices are needed to remove large volumes of air and gas.

Types and scope

Vacuuming in everyday life is used to remove excess air from polyethylene packages intended for storing clothes or food. When air is taken in, the volume of the container decreases, polyethylene fits snugly to the product. Using this method helps to store food long time, it does not deteriorate even without freezing.

Things and household products (plaids, blankets, pillows) are significantly compacted in the package, as a result of which they take up much less space. It should be noted that clothing during such storage is reliably protected from moths.

Thanks to vacuum units, it is possible to process with a laminating film wooden crafts or building materials. Vacuum pumps are used to remove gas or steam in everyday life. This is necessary in order to restore the tightness of the devices. In addition, the devices have found application in split systems.

The main types of vacuum devices:

• Water ring - their work is carried out by immersing a device in a liquid, which, during rotation, pumps out air from the center of the bladed mechanism.
• Rotary vane units - often produced in two chambers, they operate by forcing gas from the first chamber into the second, ensuring the operation of the rotor.
• Membrane-piston devices - a vacuum is created in them piston system. The compressed gas exits the chamber with the help of a valve, reducing the pressure and supplying new portions. Such devices are considered one of the most versatile and silent.

The simplest devices

If the device is needed urgently, you can quickly make the simplest vacuum pump with your own hands. This will require two plastic bottles different diameters, which can easily fit into each other. One of them will act as a piston, so you should select containers that are close in diameter, otherwise a large sealing layer will need to be made on the smaller one. In addition, you will need a hose from a bicycle pump.

If the device is needed urgently, you can quickly make the simplest vacuum pump with your own hands.

First you need to cut off the neck of a larger container. Then, make a hole in the bottom of the smaller bottle and insert the bottles into each other (it should be noted that seals may be needed on the inside, which can be made using adhesive tape). Then screw the hose into a large container, always in the opposite direction. The device will pump out air when moving the piston from a smaller container.

Cuff pump upgrade

You can make a vacuum pump for pumping air with your own hands from any cuff device. For these purposes, even devices for bicycles are suitable. Of course, it is better to take a car pump, because with its improvement there will be much less hassle.

Step by step instructions for making:

1. Spin the car device.
2. Remove cuff and turn it upside down.
3. Assemble the device in reverse order. The difference is that the cuff is turned upside down. reverse side.
4. At the inlet to the pump, where the hose is located, with which air is pumped out, screw check valve. The latter must function by passing the air flow from the vessel to the device. There should be no movement of the air mass in the opposite direction. The check valve can be purchased separately or taken from the aquarium compressor. Just before installation, you need to blow into it. Screw one of the sides that will not let air through to the pump, and the other to the tube. It should be noted that the device is quite enough to meet the needs of everyday life, but it is not suitable for creating a deep vacuum due to its low power.

Vacuum tool from compressor

A more powerful device can be obtained from the compressor, which is present in air conditioners or refrigerators. Step-by-step master class on self assembly unit:

1. Remove the compressor from the evaporator and condenser. To do this, you need to cut copper tubes used to connect devices.
2. Connect the compressor correctly to the power supply.
3. Attach a fine air filter at the inlet to the device (you can buy it at any auto shop).
4. Attach flexible hose the desired diameter to the outlet of the device.
5. Connect the compressor to the network.

With the help of such a unit, it is impossible to pump out air masses that contain a lot of water vapor. This may cause damage to the device. In this case, it is necessary to make a receiver and a sump. Such parts will work together as a dehumidifier.

A vacuum pump can be made independently from an aquarium compressor. To do this, you need to disassemble it and remove the check valves. When the valves are reversed, the compressor will begin to pump out air instead of pumping. The procedure is similar to the manufacture of the device from an autopump.

Using a medical syringe

Such a device will certainly come in handy on the farm if you need to pump out liquid or gas in small volumes. The following parts are required for operation:

• plastic tee;
• flexible plastic pipe, its diameter must be identical to the holes of the tee and syringe;
• 2 check valves for aquarium;
• syringe, the volume of which depends on the power of the device (the larger the syringe, the greater the power).

The plastic pipe is cut into pieces 10 cm in size, and then attached to the tee. The tubes should fit snugly against the nose of the tee. This is necessary so that they do not jump off under pressure during operation of the device.

The syringe nose is then attached to the central tube. The whole structure is presented in the form of a tee, on the sides of which two pieces of hose are fixed, as well as a syringe located at a right angle with respect to the retracted ends.

The next step is to install the valves. Often they are marked with a pointing arrow. One of them should be placed so that the arrow points from the tee, and the second - with an arrow on it. In general, the system will be similar to an entry-exit sign.

The hand device is ready. It can be used to pump water from one container to another by placing one valve in the liquid and the other in the pumping container. The arrows act as guides. You need to immerse the valve in the water, the pointer of which points to the tee. The system will work when the movement of the piston, which is located on the syringe, begins.

It is quite difficult to do it yourself in the absence of lathe, welding machine and no special skills. For manufacturing, a cylindrical body is required. It should accommodate a shaft equipped with a paddle wheel. During the water supply, the wheel rotates and under the action centrifugal forces a vacuum will certainly be created in the device.

The mechanism is powered by an electric motor. The impeller should not be installed directly in the center. This is necessary so that the gaseous mass is injected and pushed through the system. The disadvantage of such a device is that the liquid, thanks to which the device works, is constantly heated and needs to be replaced.

The device must be equipped with inlets. With their help, the liquid will flow inside. In addition, there must be outlets through which gas can escape. Similar mechanisms are used in large enterprises, as well as in agricultural work to remove gas mixed with sand or dust. For continuous work it is necessary to provide a gas outlet, a constant supply of liquid and a motor cooling system.

The mechanism is powered by an electric motor. The impeller should not be installed directly in the center.

Car pump conversion

You can make a vacuum pump with your own hands using a similar automotive device. . step by step process consists of the following:

• first you need to remove the stem with the cuff from the open cover located on the sleeve;
• after unscrewing the screws, remove the cuff;
• turn the latter in the opposite direction and install it and the stem in place.

As a result of the manipulations, a suction tube will be obtained, to which a check valve must be connected. During installation, make sure that air enters the sleeve. To check this, you need to blow into the valve. A tube should be attached to the second end of the valve, which should be made of dense materials that are not susceptible to atmospheric influence.

Such a device creates a vacuum in food containers or clothing storage cases. Breakdowns that occur can be easily repaired with your own hands. To do this, it is enough to study the materials on the device of the original unit. After reviewing the design, you can repair the device yourself, without the help of expensive craftsmen.

To make a vacuum pump with your own hands, you need desire and source material. The scope and complexity of manufacturing the device depends on the type of primary device. Big advantage self-manufacturing appliances can be considered significant cost savings.

Many men in their lives experience dissatisfaction with the size of their penis. But hopeless situations can not be. It is possible to increase manhood, and there is a way to do it at home. We are talking about a special pump - a device that uses an increase in blood flow to the penis to achieve and maintain the desired erection by creating a vacuum in the surrounding space. It is not a cure for erectile dysfunction, but the ability to have sexual intercourse is enhanced. This device is properly called a vacuum pump.

How it works

All pumps, depending on the mechanism for creating a vacuum, can be divided into two types: air and hydraulic. That is, the principle of operation of the first type of pumps is that the air is pumped out of the pump, thereby the remains inside become discharged (as a rule, full vacuum cannot be achieved). The hydraulic pump mechanism is based on the creation of pressure under the action of water. Air pumps are simpler in design, respectively, it is easier to make them yourself, and we will consider them.

The usual simplest pump for penis enlargement (including those created by oneself) contains the following structural elements:

• Flask to accommodate the penis.
• Pump or pear with a valve for bleeding air masses.
• Connecting hose between bulb and bulb, pressure sensor (may be missing).
• Erection ring.

After the penis is placed in the flask (press firmly against the pubic area to ensure tightness), we begin to remove air with a pear or pump. At the same time, the blood flow will increase, the blood, as it were, is drawn out under the action of a vacuum, and, as a result, the penis increases to several centimeters in length, and a little in width. Then we take the unit out of the cylinder, put on an erection ring at the root of the penis. So the blood will not leave the body, and it will remain in this state for a long time. It is not recommended to use the ring for more than 30 minutes, it is better to take a break and then repeat the entire procedure.

Materials and Assembly

The original device is expensive, and some men are simply not ready to spend money on such things due to certain conditions, many are simply embarrassed to make a purchase - it does not matter, you can make a penis pump yourself. All materials for manufacturing can be purchased at a low price or obtained from household scrap materials, do it yourself.

When choosing a flask, you need to choose a size a couple of centimeters larger from the penis.

• Flask

The main structural element is a cylinder or flask for placing the penis. It is necessary to choose something similar in size in its erect state for your body (with a margin of several centimeters). Ideally, it should be something transparent so that you have full control over the entire process. The easiest way to find the right dimensions is an aerosol can. Its contents are completely removed, the atomizer is disassembled and removed. The edges of the improvised cylinder are aligned. To protect against injury to the skin and soft tissues, you need to cut out a silicone or foam pad (anything that can be found in old household items), a kind of cuff to accommodate a penis.

• holes

A hole is made in the upper part of the cylinder, a tube for the pump is attached. The hole should be made at the most convenient angle so that there are conditions for a strong connection. Can be used metal tube and solder it with a jar with a further transition to a rubber one (connect it with a clamp), as an alternative option, make a rubber tube right away - run it two centimeters into the bottle. In the second case, the opening in the vial should be slightly smaller than the diameter of the pipe. The seam must be treated with hot glue or silicone sealant. These simple terms will help to make our design impervious to air masses.

• sucking

Now we need to figure out how to bleed air from the flask. From household unnecessary things, a tonometer can be suitable for measuring blood pressure, bicycle or car pumps. Any of the available pumping devices must be carefully disassembled with your own hands, turn the cuff in the opposite direction, assemble in the opposite direction. From the tonometer, you only need a pear (part of the tube can be used), you also need to disassemble and put the valve in the opposite direction. All this is necessary so that the device draws out air, and does not pump it up, as it was originally. The best decision- a syringe for 50 cubes, it is easier to adapt, but it is not so convenient to operate.

A syringe can be used to suck air.

It remains to connect all the parts of the structure - the do-it-yourself penis pump is almost ready. Check the tightness again, make sure there are no gaps. Re-lubricate with silicone or apply hot melt adhesive as needed. We used only improvised means, everything was done at home in the most ordinary conditions.

Security measures

A home-made penis pump does not always turn out to be of high quality, even a device made correctly sometimes causes trouble, during its operation certain asepsis rules must be observed. Any injury to the skin of the penis when using the device with your own hands is fraught with the development of infectious complications. To do this, you need to give time until the pump dries - three or four days. Be sure to process the cylinder from the inside. It is enough to rinse with boiling water, but for more confidence treatment recommended inner surface disinfectants or antibiotics. For this purpose, a solution of furacillin, bought at a pharmacy or prepared from a tablet of the same name with your own hands, is suitable (how to make a solution, read the instructions for the drug).

A common situation occurs when men incorrectly calculate how much their penis will increase, then during the first operation it will simply get stuck inside the pump. And extracting it yourself at home will not always work, you will have to turn to the help of doctors. To prevent this from happening, select the appropriate size materials.

Do not abuse the frequent use of the pump, and this applies not only to a do-it-yourself device. Periodically - please, but too frequent mechanical impact on the genitals will leave its mark on health. Be careful, good luck!

Every man who at least once was interested in ways to increase the size of the penis should know about such a device as a vacuum pump. On thematic forums you can find information on how to make this device with your own hands. To get homemade pomp, you just need to get necessary details and clearly follow the instructions, which describe in detail each stage of the manufacture of the device.

What is the pump made of?

To understand how to make a pump yourself, you must first study its structure. This device, which is used by men to correct penis parameters, consists of the following details:

To make a pump at home, you need to find items that can be a replacement for the standard parts of a professional device.

Assembly materials

If there are no materials at hand that can serve as parts for a home pump, then it is unlikely that it will be possible to assemble it. Therefore, initially it is required to get them, and only then deal with the assembly process of the device that enlarges the penis.

First you need to find the cylinder, which is the basis of the device for the penis. It must be of the correct length and width so that the penis fits freely into it. As practice shows, finding such a cylinder is not so easy. Few people keep such items at home. But it can be purchased at a pharmacy.

It is necessary to ensure that the main parameters of the purchased cylinder are suitable for the size of manhood.

Otherwise, the device will not be of any use. The member should penetrate this part without any problems.

It is also important that there are no irregularities or roughness on the surface or in the cavity of the cylinder. It is easy to injure the delicate skin of the genitals about them.

The best item that can replace the pump cylinder is a syringe of a fairly large size.

Men need to be prepared for the fact that his search will take a lot of time.

Some craftsmen are trying to replace the cylinder with a glass bottle. It's not the most best idea, since during the procedure it can split and seriously injure the genitals.

You will definitely need a sealant that will hold the vacuum inside the device. Otherwise, a do-it-yourself pump will not be able to cope with the main task. In simple words a pump capable of generating low pressure by forcing air is required.

The choice of sealant is quite wide. A pear from an apparatus designed to measure blood pressure can serve as this part.

It will need to be connected to some kind of tube and attached to the future pump.

Often in the reviews, men who have already been involved in the manufacture of a home pump recommend others to use the help electric pump, as it will be easier to work with it in the future.

When choosing materials for the device, you should follow a number of rules:

1. For the pump, you need to choose only those materials that will not cause allergies.
2. Before proceeding with the fastening of parts, it is required, if possible, to thoroughly wash them with soap and water. Not prevent additional processing antiseptic solution.
3. It is necessary to select only those products that have not been damaged.

Another important point. All parts for a home pump must fit each other in size. Otherwise, they cannot be connected correctly.

Pump Assembly Technique

Anyone who intends to assemble a pump on their own, which makes the male genital organ larger and thicker by several cm, must understand that the result of the work is not always the expected device.

Appearance finished product may be very different from what is shown in the picture in the instructions.

Even the one who does everything neatly and according to the rules did not insure against such a problem.

Actually appearance device is of no importance. The main thing is that he does his job well and does not cause harm to health.

Here's how to make your own penis pump:

1. It is necessary to take the base, which will act as a cylinder and make a small hole at its end.
2. A tube with a seal should be inserted into the hole at the bottom of the future pump. It should fit well against the walls of the base. It is desirable that the tube be made of dense material.
3. The edges of the cylinder must be covered with a clean pump collar. It will protect the genital organ from accidental injury during its introduction into the device. Can be used instead of a cuff regular fabric or paper. Some even use soft plastic.
4. Using a sealant, you need to fasten the main elements of the future pump together. It is advisable to ensure that the thickness of its layer is the same in all zones.

The process of making a home pump is finished. It is not recommended to use it immediately. For safety reasons, as well as to prevent damage to the device, you need to let it lie down for several days. During this time, the device will dry well. When the sealant has completely cured, the machine is ready for use.

Do-it-yourself products do not have instructions, unlike professional devices. Therefore, a man will have to independently deal with the principle of operation and how to use a home pump.

It is best to pre-watch thematic videos on the topic of similar devices that men make on their own. You need to know exactly how to use the finished product. Only then will it give the desired result.

What could be the mistakes

The main task that a person who decides to independently assemble a pump should pursue is to follow the rules for choosing and attaching the main parts of the device.

But sometimes, for one reason or another, men make mistakes, because of which their device cannot work correctly.

Most often, in the process of manufacturing a home pump, the following mistakes are made:

To avoid mistakes, you need to more carefully study the instructions for making a pump at home. Then it will work properly and last more than one year.

Advantages and disadvantages of a homemade pump

Like any device, a home pump has its positive and negative qualities. To begin with, it is worth getting acquainted with its advantages.

The main advantage of such a device is its cost. You just need to spend money on parts for assembly. Although most items can be found at home.

To get his own pump, a man does not have to be embarrassed to go to a specialized store. And this is quite a difficult task for people who are embarrassed in sex shops.

Another advantage of a home pump is the ability to fit it to the size of your manhood.

It is only necessary to correctly measure and calculate the optimal parameters of the device.

Unfortunately, the device for correcting the size of the penis is not without its drawbacks. And it is precisely because of them that many men refuse such devices, giving preference.

The main disadvantage of the pump is that it does not always work correctly. Therefore, you can not wait to get the expected effect.

The lack of results after using a do-it-yourself pump may be due to insufficient vacuum strength.

In addition, such devices often cause pain, which is why men have to refuse to use them in practice.

If a man does not plan to seriously increase the size of an intimate organ with a pump, then he can use a self-made device for entertainment purposes.

If it is configured to correct the parameters of the member, then it is better to choose a professional device that guarantees receiving desired result. This pump is much safer.

In addition, instructions will be attached to it, which explains in detail the procedure for using the magnifying device. Therefore, the chances of making a mistake during the session will be minimal.