How to paint plastic in a car. Plastic painting technology: how to get a durable and beautiful coating

Today, each of us, sooner or later, is faced with the need to paint any plastic parts. After all, we are surrounded by a lot of things from this material: in modern cars, motorcycles and scooters, the number of plastic parts is increasing all the time. The technology of painting plastic has its own characteristics and nuances. This is due to certain properties of this material: it is quite elastic and the paint does not adhere well to its surface. Also, the behavior of plastic when coated with paintwork materials depends on the type of plastic. To date, there are many different means for coloring this material, so repairing car plastic parts is not a problem.

The type of material is always indicated on the marking on inside details, so before you start painting, carefully study this abbreviation.

Types and properties of plastics

Plastics are materials with a polymer base. Due to the content of various plasticizers, stabilizers and other fillers, plastic is endowed with good properties fluidity, plasticity, strength, etc. There is a classification of plastic according to the following criteria:

1. Chemical composition.
2. Rigidity.
3. Fat content.

But perhaps main criterion characteristics of this material - how the plastic behaves when heated. According to this property, its types are distinguished:

• thermoplastics - plastic that melts when heated, and in the process of cooling it acquires its original state. Due to this property, such parts can be welded and soldered. This type of material is the most used for the production of auto parts: panels, bumpers, radiator grilles, wheel caps, etc.

• thermoplastics - materials that become soft when heated only once - during the formation of the part, remain solid during subsequent heating. You can’t weld and solder them, otherwise the material will simply collapse. Thermoplastics are heat-resistant, so they are used for the production of hoods, trunk lids, fenders, etc.
• Elastomers are plastics with high elasticity. When loaded, it bends, and when it is removed, it takes on its original shape. The main advantage of this type of material is that even with very high temperatures they remain flexible. Tires, seals, etc. are made from it.

Painting plastic in the car (video)

Determining the need for a plastic primer

Before painting, often plastic parts need to be treated with a primer. Often, but not always. It all depends on what type of plastic this element is made of. At home, this is not difficult to determine, for this you only need matches or a lighter. With their help, we need to set fire to a small area of ​​the product.

If the combustion process is accompanied by soot, then priming is not necessary. Another life hack - the part must be immersed in a container of water, and if it floats, then soil is not needed.

Stages of painting plastic elements of the machine

Before you start painting, you need to prepare all the tools and materials necessary for work:

• dye;
• solvent or white spirit;
• acrylic varnish;
• primer for plastic "plastafix";
• abrasive paper for cleaning.

1. We clean the surface with an abrasive cloth to get rid of small irregularities.
2. We process with a degreasing agent - in our case we use a solvent or white spirit.
3. We use an antistatic agent so that dust does not sit on the surface.
4. If there are significant irregularities, we putty the defects and clean them. We use a special putty for plastic.
5. Re-degrease the base.
6. We apply primer - 2-3 layers and leave the coating to dry - usually it takes about 1 hour.
7. Apply acrylic paint in 2 or 3 thin coats using paint brush or a balloon. This composition, as well as possible, is suitable for coloring plastics. And leave to dry for 30 minutes.
8. The surface is varnished.
9. Apply paste to polish the surface.

Tip: It is better to apply paint from a spray can, this will significantly reduce material consumption, unlike painting with a brush. But if you have to work with a brush, then expect that such a coating will dry for 20-25 minutes longer.

Various technologies for painting plastic

There are many different technologies do-it-yourself painting of plastic elements of a car. Which one to choose depends entirely on your desires and taste preferences. With the help of paint, you can imitate the wood coating on the part. This technique is not particularly difficult, but the result is spectacular.

The technology of such coloring is as follows:

• After preliminary filling and priming with a brush, we apply longitudinal lines with black paint; in some places, holding the brush perpendicularly, we rotate it, thus, drawing, as it were, knots.
• Then we clean the coating along the drawn stripes, creating an imitation of a wood structure.
• Next, apply white paint.
• We glue thin strips of adhesive tape in random order.
• With dark brown paint, draw the gaps between the adhesive tape.
• We remove the adhesive tape and use brown paint to correct the drawing as we wish.
• If desired, the surface can be varnished.

Swirling technique (swirling - English rotation) is distinguished by its originality and creativity. What is it? Let's try to figure it out.

The meaning of such coloring is to cover a plastic part with a multi-colored film of paints. To do this, a special paint is poured into water and the product is immersed there. In this way, a colored film covers the surface.

Such a plastic processing option as flocking performs not only a decorative function, but also improves thermal insulation characteristics material. After all, plastic, painted in this way, does not lend itself to heating. Externally, this finish creates a velvet effect on the surface.

Photo gallery of finished works

We must decide on the basis of its structure. After all, this material is quite different. So what kind of paint is better to paint plastic, we will understand below.

After choosing, it is also necessary to apply the coating correctly, because it should look and be durable. And this can be done in several ways. Also on the video and photo you can see the most difficult moments of this work.

How to properly paint plastic will depend on its characteristics. But in any case, high-quality preparation of the plane should be done.

The paint does not adhere well to the PVC surface. So preparation is very important. Painting plastic, like painting any other surface, has its own characteristics.

Attention: Painting is best done with a spray gun. In this case, the coating can be applied most evenly.

For convenience, we will analyze the whole process step by step:

• Before starting work, you need to make sure that there are no contaminants on the surface of the product.. The surface to be treated must be dry and clean.
• Before painting can begin, the plastic must be coated with a special primer for high adhesive plastics. It can be purchased at paint and varnish, construction and auto stores. The primer should be applied by spraying (using a spraying device) or by wiping. After processing, the product must dry completely.
• In order for the staining procedure to be comfortable, and the adhesion between the plastic and the paint to be as strong as possible, a number of conditions must be met:

1. Temperature environment should be more than 18 degrees, and humidity indicators should not exceed 80%;
2. The temperature of the surface to be painted, paint and tooling should be approximately the same.

• Coloring of plastic takes place in one layer, the thickness of which is 60-120 microns. If the layer is thinner, then the wear resistance of such a coating will be very low. A layer thickness above 120 microns will significantly increase the time for complete drying, which may adversely affect appearance painted product.
• The recommended drying temperature for plastic surfaces is 18-60 degrees, a more specific temperature range, as well as the drying time itself, directly depend on the thickness of the paint layer. For example, a layer of 80-120 microns at room temperature and a standard humidity of 40-50% will dry in 8-10 hours, and at a temperature of 50 degrees and a relative humidity of 65%, the drying period will be reduced to 3 hours. The surface of polyamides and polypropylenes at an air temperature of 100 degrees will dry in 20 minutes.
• Polymerization (final drying) of the painted surface is completed only for 5-7 days. However, when the layer thickness is more than 120 µm, low ambient temperature and high humidity polymerization time can be significantly increased. Until the end of polymerization, it is undesirable to expose the painted plastic to prolonged exposure. low temperatures and high humidity.

Coloring plastic at home

Do-it-yourself coating will be much cheaper than the price of specialists. Let's look at how to paint plastic at home.

In order to qualitatively paint the plastic surface on our own, we need:

• Aerosol paint-enamel on plastic or enamel on plastic;
• Acrylic spray varnish for final surface treatment (it can be matte and glossy);
• Protective equipment for hands, eyes and respiratory organs (gloves, mask, goggles);
• Polyethylene film (to cover surrounding objects);
• masking tape;
• Plastic cleaners (water, rags, brush, detergent);
• Solvent (for example, white spirit);
• Grinding paper with abrasiveness up to 180 microns.

What paint to use?

What kind of paint can be used to paint plastic, now we will consider in more detail. The choice of paint must be approached with particular scrupulousness, since the type of paint and the features of its interaction with the surface have a direct impact on the final result.

So:

• For products made of soft plastics, it is necessary to use enamels with high content elasticity and plasticity. And for products made of hard plastic, universal acrylic paint-enamel.
• In our case, acrylic paint on plastic is best suited, which can be purchased at any construction and paint and varnish stores.

Attention: Also, when buying, you should keep in mind that there are two forms of release of such paint: aerosol (in cans) and liquid (in buckets).

• It will be most convenient for us to use spray enamel paint, because. it has good adhesion, is easy to use and dries quickly. If you need the most uniform distribution of enamel over the surface, then you can purchase a specialized tip for aerosol cans, which allows you to manually adjust the degree of paint spraying.

Attention: plastic products marked PS (polystyrene), PC (polycarbonate) and PE (polyethylene) are not painted!

• We will finally fix the paint with the help of acrylic aerosol varnish.
  If you work with a new surface or use liquid paint, then you will also need a primer for plastic, for example, "Otex" from TM Tikkurila.
• If you are going to paint old plastic, then grinding the surface will be enough.

Spray painting process

conditionally, complete process staining plastic product can be divided into 6 steps:

Liquid paint process

An alternative method of painting is painting with liquid paint and a brush. Painting with a brush has both pros and cons.

The main disadvantage of this staining method is - long time drying, during which the deposition of dust/dirt on the treated surface must not be allowed. Because this cannot be done at home; a similar staining method is used only in cases where a perfect coating is not needed.

In many ways, this process repeats the above method:

• Product cleaning.
• Surface degreasing.
• Grinding. At this stage, the product is treated with a primer, which will significantly increase the adhesive properties. plastic surface and improve its adhesion to the paint. After treatment with a primer, the plastic must be dried for several minutes.
• Coloring.

Painting with a brush has a number of special features that you need to consider if you want to get a good result:

• Paint-enamel should be applied in a thin layer, continuously pressing the brush to the surface;
• When picking up paint, do not immerse the brush in it completely;
• Throughout the entire staining process, the angle of application of the paint should be carefully monitored, it should not change;
• First, apply the enamel in wide stripes, and then blend it. This will fill all the surface roughness and achieve the most uniform coverage.

Applying varnish, fixing the result. Keep in mind that the varnish in this case must also be applied after the surface of the product has completely dried, in the case of liquid paint, this period is quite long. Keep in mind that spray nail polish dries much faster than regular nail polish. The drying time of conventional varnish is approximately 2-2.5 hours.

You now know how to paint plastic and the instructions will not allow you to make mistakes.

Car plastic painting a great way to transform worn parts of the exterior and interior of a car, as well as giving them a new color and shine. Most often, car enthusiasts will do it, due to the fact that car painters do not want to mess with plastic small things (especially if these parts are half a bag)), or they overestimate the price for their work, but everyone wants to save. Therefore, in this article we will analyze how cheap, independently and efficiently do-it-yourself car plastic paint in garage conditions.

The technology for preparing a plastic surface is absolutely the same for both painting from a cylinder and from an airbrush. The only difference is what you will spray paint from.

The most important thing when doing painting works, is patience and accuracy. If you have these two qualities, then you can easily paint any part of the car yourself.

What you will need:

1. Cylinder with car paint. I want to note that it is simply not possible to choose a balloon with the right shade, and even with a 100% match! But there is a solution! Now in many specialized stores for the sale and selection of car enamels, it is possible to “fill” the balloon with the desired shade, which can be picked up there. To do this, you need to remove any part from the car and give it to the colorist. Most often, this is the gas tank hatch, since it is rarely painted and, accordingly, the percentage of hitting the color increases. Well, or you can, for example, pick up paint by code. It is on almost every car, only located in different places. Basically, it's a small aluminum plate affixed to the engine bay. It looks like this:

2. Primer for plastic ("Velcro").

3. Acrylic primer. The color must be selected based on the shade of the part. If the detail is dark, then it is better to buy a black primer, because, firstly, this way the paint will cover better, and secondly, chips will be less visible.

4. Clear varnish.

5. Sandpaper, grit P 240, 320, 600, 800, 1000, 2000. “Wet!” Let me explain. There are two types of sandpaper: “dry” and “wet”. There is no point in using them the other way around. If you want, you can try and see why.

6. Degreaser (Anti silicone).

7. Napkins or cloth to remove dirt.

8. Accessories for car polishing (wheels, paste, etc.). This is only necessary if there are any kosyachki on the varnish.

Stage 1 - preparation.

At the stage, we dismantle from the car all the parts to be painted. Now, touching on the issue of surface preparation, I will say that everything here is strictly individual for each detail, but still I will try to voice all the points that you may encounter when painting plastic.

For example, you buy a door molding at a car dismantling, which of course needs to be painted.

Option number 1

This molding is from a cheap car configuration, on which such elements as: mirrors, door handles, plugs, moldings and much more, “go” not painted.

With painting such a part, you will have to tinker a little longer and spend a little more materials. I will describe the process a little later.

And option number 2

This molding is from the car in the "normal" configuration. It's already painted silver. If the surface of the part does not have scuff marks and scratches, then it is enough to matte the surface with sandpaper, grit R 800-1000, or you can use gray scotch bright. Then we apply paint and varnish.

As you can see, the detail in the second case is much easier, since we skip the priming process.

There are still cases when the paint begins to peel off, or there are any deep scratches, dents and other defects. Here you can no longer do without rough sandpaper and putty.

2nd stage - priming.

The types of soils used directly depend on the quality of surface preparation. A little higher, we sorted out the options for details. In the first case, we need Velcro primer, which is applied directly to the plastic. The surface needs to be matted first. sandpaper P 600 - P 800 or gray scotch bright. The primer is applied with a spray gun, or you can use an aerosol can. Dries within 10 - 15 minutes, after which you can apply car enamel. This information is general and does not apply to any manufacturer. Therefore, I advise you to pay attention to the instructions before applying. Yes, and one more thing. Primer for plastic is produced mostly in a transparent color, so there are difficulties with spraying, either too much in one place, which leads to smudges, or in some places there is none at all. The solution is simple, prime in a well-lit area, and another option is to look for a silver-filled primer, which is especially useful when priming large parts, such as a bumper. Just do not try to add any filler to the soil on your own.

Where to use acrylic primer?

Now the question is brewing, is it necessary to apply acrylic primer to the Velcro ground ?! The answer yes or no also depends on the surface of the part. If plastic part does not have mechanical damage (seizures, scratches, abrasions, cracks), then it is enough to apply only primer on plastic. Well, if the part was polished with coarse abrasives, then to hide the risks, it is necessary to apply acrylic primer.

The color of the primer depends on the color of the part. If, for example, the detail is dark, then it is better to use black primer and vice versa.

Acrylic primer is best applied in 2-3 layers, while it is necessary to do an inter-layer exposure, about 3-7 minutes. Otherwise, the soil may leak.

In my article, it is described and shown in great detail how to paint a new plastic part.

After you cover the repair part with acrylic primer, it must be left for a while to dry completely. Drying time is indicated on each can of material. But I advise you not to rush, and if the time is 3 hours, then it is better to start rubbing the soil after 6 hours. Usually we prime the parts and leave them overnight. Arriving the next day, the soil will probably already be ready for processing.

3rd stage - mashing the soil.

Primer on plastic (“Velcro”), does not need mashing!!! You can apply paint on it immediately after drying. But acrylic primer requires some processing (washing).

To "wash" the soil, we need a bucket with warm water soapy water, of course, it is not necessary to add soap there, but it is still recommended to do this, since sandpaper clogs less.

We will definitely use sandpaper “wet”. In one of my articles, I wrote that there are wet and dry sandpapers, their scope directly depends on the name, but not in any case on the contrary !!!

There is a huge number of sandpaper manufacturers, but of all, I would recommend using Sia (See the figure below), as it has proven itself very well. I do not impose this manufacturer on you and you may like a completely different paper to work with.

How to understand that the surface is worn?

It is necessary to overwrite until the surface becomes absolutely smooth, while constantly moistening the sandpaper and the part with water, since sandpaper “wet” does not like it when it is dried dry (so you just don’t rub anything, Yes, and still do a bunch of scratches that will be visible when painting).

After you have made sure that the surface is ready, the part must be thoroughly rinsed with water to remove soil dust from it.

4th stage - painting the plastic of the car.

Perhaps the most pleasant moment has come, after such a long and tedious work, this plastic painting.

Painting takes place in two stages:

1. Paint application

2. Lacquering

Although this option is not always the case, for example, varnishing is not required for acrylic paints (1-k).

Lacquer should be applied after 15-30 minutes, after applying the last coat of paint. The varnish is more liquid, so do not pour too much, otherwise you will make smudges that will be very difficult to remove on the radiator grill. On a flat surface, this is much easier to do.

The first layer of varnish should be applied drier, so it will better cling to the surface and will not smudge. We apply the second layer to the “spill”, trying to lay it without shagreen (just do not overdo it, otherwise you will make smudges). If you have no experience at all in painting with a balloon or spray gun, then initially it is better to practice on some unnecessary detail.

Moldings painted and ready to install. When painting such parts, be sure to pay attention to the ends, which will be very clearly visible when installing the part on the car.

Now there are no more “cheap” plastics on the car and visually, the equipment of the car has become higher))

I hope that this short article about painting the plastic of a car will help you refresh the boring gray parts of a car on your own.

If you have any comments feel free to leave them below.

Painting plastic, in particular PVC (PVC) - plastics, is not a trivial task. It is quite difficult to find a suitable solution among the variety of paints and varnishes. The main problem when painting various plastic polymers is to achieve the necessary adhesion of the coating to the substrate.

When using most non-specialized paints, the coating literally “peels off the skin” from the plastic or gathers wrinkles. As a rule, in addition to paint, it is required to buy a special primer for plastics. But this makes it more difficult technological process painting plastic products, which means that time, money and labor costs are growing.

One of the strongest areas of our company is the production of single-layer primer-enamels for PVC and other common plastics used in the electrical, automotive, furniture and construction industries. As well as the production of paints and primers for plastics that are problematic in terms of coloring (PP - polypropylene, porous plastic, PA-6 - polyamide 6, GFK - fiberglass, EPDM, etc.).
The use of primer enamels for PVC and other plastics is possible without prior priming. Strong adhesion on plastic is achieved due to special components that etch the surface and penetrate deep into the base (while the plastic is not destroyed or corroded). Lankwitzer plastic paints are highly elastic and do not require additional plasticizers during application, which also reduces the cost of painting. The appearance of cracks and chips is excluded. Paint for plastics can create a variety of tactile effects: a smooth glossy or matte surface, a velvety "soft-touch" surface or a structured "pebbled leather" surface. paints and varnishes Lankwitzer for PVC and other plastic polymers is not very demanding on the degree of surface preparation and is generally a very simple and economical solution.

Painting schemes for PVC and other common plastics with different coating requirements:
- Schemes for smooth coloring pvc plastic;
- Painting of PVC and other plastics with various effects and coating properties: with a tactile effect or structural surface, with increased wear resistance, etc.
Lankwitzer specialists have also developed schemes for painting many other plastics (ABS, PS - polystyrene, PC - polycarbonate, etc.) and problematic plastics (PP - polypropylene, porous plastic, PA-6 - polyamide 6, GFK - fiberglass, EPDM, etc. .).

Schemes for smooth painting PVC plastic
Products made of PVC (PVC) have a sufficiently smooth surface that reduces the adhesive properties of most plastic paints. To solve this problem, our specialists have created a modified two-component primer-enamel for PVC EvoProtect 240. Special adhesive additives improve the adhesion of the paint to PVC and its derivatives. PVC paint EvoProtect 240 is used in the electrical industry (painting PVC boxes, PVC junction boxes), as well as the construction industry (painting PVC profile: windows, siding, facades).

High levels of abrasion resistance of the coating, as well as resistance to ultraviolet radiation, high humidity and condensation allow this PVC paint to be used outdoors in all climatic zones our country.

The paint for PVC is produced on the basis of non-aggressive solvents, which allows repairing PVC products that have been previously painted. powder materials or liquid coatings.

Also for PVC siding, a two-component primer-enamel EvoClear 295, modified with adhesive additives, is used. Paint for PVC siding EvoClear 295 gives the surface a high gloss gloss, an optimal balance of hardness and ductility. Excellent paint flow on PVC siding creates an exceptionally smooth surface, on which particles polluting the surface do not linger: dust, soot, soot, salt. Coating PD 95 belongs to the class of anti-graffiti paints, which allows the use of caustic substances to wash off the applied graffiti paint.
Polyurethane-acrylic primer-enamels for PVC: EvoProtect 240 and EvoClear 295 provide long-term outdoor protection for a period of at least 10-12 years.
Also in the range of Lankwitzer coatings there is a one-component alkyd primer-enamel for PVC, used for protection internal surfaces PVC for 10 years and PVC exteriors for at least 5 years: EvoProtect 336. Manufactured from a modified alkyd-polyvinyl chloride resin. It is characterized by ease of preparation and application of the material.

Tactile paint with tactile effect "Soft- touch"
To give the painted surface a velvety effect, a two-component polyurethane-acrylic paint for plastic EvoDecor 289 is used. This type paints for plastics have found wide application in the automotive and furniture industries, as well as in the production of household appliances and electronics.

Structural paint for plastics (PVC, ABS, polycarbonate, etc.)
EvoProtect 239, EvoProtect 248 structural paint for plastics with a high degree of thixotropy is used to hide casting defects or damage to plastics, as well as to create a structural effect on smooth plastics, which allows you to create a durable structural silky-gloss coating. The covering possesses high resistance to mechanical loadings and influence of the washing chemicals.

Paint for plastics with increased wear resistance
When painting plastic products made of ABS, PS, PC, PMMA, PPO, SAN and subjected to constant mechanical and chemical stress, paints for plastics EvoDecor 216, EvoDecor 234, EvoClear 295 based on polyurethane-acrylic resin are used, forming a hard high-gloss coating. Paints for plastics EvoDecor 216 and EvoDecor 234 are supplied only from Germany, paints for plastics EvoClear 295 are tinted in Russia from German components.

Paint for plastics: ABS,PS- polystyrene,PC- polycarbonate
For painting household electrical products, as well as furniture fittings acrylic paint for plastic LD66 is used, which does not require preliminary priming when applied to the following types plastics: ABS, PS, PC, PMMA, PPO, SAN, i.e. which combines the properties of primer and enamel, has a reliable grip and does not corrode plastic.

Primer for plastics with weak adhesion (PP- polypropylene, EPDM,PA-6- caprolon)
Some types of plastics require pre-priming or special surface preparation before painting. Plastic primer EvoPrime 320 allows to paint polypropylene (PP) and ethylene-propylene rubber (EPDM), without pre-training surfaces.
For painting plastics of these grades, as well as for polyamide 6 (Caprolon or PA-6) plastics, it is recommended to use a modified primer with enhanced adhesion EvoPrime 322.

Primer for plastics with a porous surface, uneven plastics
EvoPrime 367 Plastic Primer has excellent filling power and effectively smooths surface irregularities. EvoPrime 367 Acrylic Primer is also an adhesion primer that can be used to paint low quality plastics and recycled products.

Polyurethane primers for plastics EvoCor 243, EvoCor 273 are recommended for painting fiberglass (GFK) parts in the automotive industry.
Primers for plastic perfectly smooth out irregularities and are well polished, have reliable adhesion and resistance to aggressive influences during the operation of equipment. Primers for plastic are covered with enamels based on alkyd, acrylic or polyurethane resin.

Lankwitzer plastic paints have excellent decorative appearance, high resistance to abrasion, moisture, alcohols and detergents. At the same time, the presented primers, enamels and primer-enamels are technologically advanced and easy to apply. Depending on the type of plastic, the optimal composition of resins and adhesive additives is selected to ensure sufficient adhesion to the material to be painted. Production of paints in any color execution is possible.
Call our phones to buy paint and primers for plastic or get a free consultation.

Benefits of buying plastic paints from Lankwitzer

The main arguments in favor of buying plastic paints from Lankwitzer Lakfabrik are - optimal price and superior coating performance. An additional reason to contact the company is the European level related services. A well-established process of interaction with the buyer, a polite attitude and information support focused on the needs of the partner helps to increase the effectiveness of the partnership. To purchase paints for plastic or to obtain information about the availability of products in stock, please contact the head office or regional office of Lankwitzer Lakfabrik. In the section "Contacts" there is all the necessary data for this.

Many cars have special plastic pad inside the vehicle interior. The panel comes straight from the factory and is finished in plain black. For black or cars in dark shades this is not a big problem, but if your car is silver or white color, then the black panel stands out significantly. Therefore, companies such as LRS offer services such as full or partial car painting http://lrsauto.ru/pokraska and various details auto.

In addition, time also affects the interior plastic, scratches, worn places appear, sometimes cracks and small dents appear. Polishes can't help restore original view plastic panel. Therefore, the coloring will optimal solution. But, many questions arise regarding how to paint plastic in a car interior, and whether it is possible to do it yourself. In this case, the main task is safety and proper adherence to the painting technology.

How to paint plastic in a car interior?

Specialty shops and market stalls offer a fairly wide range of paint manufacturers for car interior cutting. The choice of how to paint plastic in the car interior should be made from two paint options, namely:

• acrylic;
• aerosol.

Note that the use of resistant acrylic necessarily involves the additional purchase of a plasticizer.

Speaking of the usual aerosol paint option, it is the easiest to use and is cheaper than acrylic counterparts. Another advantage is that such paint dries faster. But, it has poor connecting properties (adhesion) with the painted surface. The master has to spend more time preparing the details and it is not always possible to choose a color that will hide the resulting defects on the plastic.

Both cans and cans may contain grainy or structural paint, which is ideal for painting parts after repair and restoration work. This option allows you to fully restore the appearance of the product, its structural features. The surface is slightly voluminous, with a slight pimply roughness.

After the structural coating of the product, it will be more susceptible to mechanical stress, not susceptible to medium fire and water. Also note that such a substance dries quickly and reduces the time to work. Does not require subsequent application of varnish. Good producers structural paint companies are APP, Novol, Body, R-M.

The primer can be purchased separately. Plastic in different cars has a different degree of quality, in this regard, for the safety and protection of the panel, you should purchase paint material and a primer from one manufacturer. This will guarantee good adhesion between coating layers.

Do-it-yourself car interior painting

The plastic material can be dyed to any desired monotone or bright color to match the color of the car. You can also use different colors to make the panel not only refresh its look, but also stand out even more. With some paint and supplies to work with at an auto parts store, your plastic trim will be painted in just a few hours.

If you decide to paint the plastic in the interior of a car with a spray can, you need to prepare and purchase some items from the list, since working with car parts is more difficult than painting a car sheet metal. Plastic auto parts include decorative details, door handles, mirror housing and other elements.

But remember that the application spray paint for plastic is not a good idea, as the paint will crack, peel and peel off in a short amount of time.

Painting the plastic of the car interior with your own hands requires the following accessories:

• To remove parts, you need a screwdriver, tweezers, forks, pliers, etc. (when removing, do not damage the fastenings of the elements);
• If the plastic won't come off, prepare protective film, paper, cardboard and adhesive tape to cover non-painted surfaces;
• Paint, primer, plasticizer (if necessary);
• White spirit for degreasing, special wax or anti-grease;
• Antistatic from dust;
• Putty from scratches;
• Airbrush, for canned paint;
• Emery cloth with grit size from 400;
• Urethane varnish;
• Brushes, if you work without a spray gun and a cylinder;
• Painter's tape.

Your independent actions can be structured as follows:

• 1. Plastic panels cleaned by hand using sandpaper. It is necessary to rub until they are smooth and pale gray. Then wipe the panels with wax or anti-grease to remove dust and fingerprints.
• 2. Fasten adhesive tape and paper along the edges of the area you are painting. Wipe the area again with wax or special anti-grease to remove fingerprints from your fingers, which can later cause bubbles under the paint.
• 3. Apply a thin layer of adhesion to the body of the product and let it dry for 30 minutes. This penetrates the surface of the plastic and provides support to the surface. Without adhesion, primer and paint will peel and flake over time.
• 4. Apply a thick layer of primer (if using alone) to the area and allow it to dry for 30 minutes. Lightly rub the surface with sandpaper until it is smooth. Wipe the panel again with wax.
• 5. Apply paint to the area, starting from the edge, starting from two thin layers. Again we wait 30 minutes. Then pass over the dried paint with clear varnish, if necessary. We wait 15 minutes between each stage.
• 6. Then remove the masking tape and paper. Let the panels dry for 24 hours.

Finally, you can see helpful video an example of how to paint plastic in a car interior at the following link:

———————————————————————————————————