Do-it-yourself automatic watering for indoor plants. The technical side of the issue

Many flower growers, while away, worry about their pets, who remain for quite a long time without care and attention. You can ask friends or neighbors to water your flowers while you're away, but there are others. effective ways provide your plants with life-giving moisture while you are away from home. Consider the most popular methods of automatic watering indoor plants.

Ensuring the water regime for flowers

You can simply water the plants well before leaving and place the pots in basins of water, which will help keep the soil moist for a week or two. This method does not require any financial investments and is available to everyone. But a more effective system will be one that allows the flowers to survive your absence for two or even more than three weeks.

How to prepare flowers for your absence

Every grower knows that plants well pre-watered can last up to two weeks without additional watering. Plants must be prepared for their departure, namely:

Organization of independent moisture supply

The automatic watering system for indoor plants is a constant supply of moisture to the roots of plants in the amount they need. The homemade greenhouse described earlier will work much more efficiently if you add an additional source of water that will uninterruptedly supply your flowers with life-giving moisture for several weeks. Consider how to make automatic watering of indoor plants at home. You can apply the simplest, "handicraft" option. For example, in ordinary large plastic water bottles, you can make small holes in the caps. Settled water is poured into the bottles and turned upside down, while setting them between the pots. Moisture will seep drop by drop to the bottoms of the pots and moisten the expanded clay on which the flowerpots stand. The holes must be large enough to allow water to flow out. You can determine the desired diameter experimentally. Now you need to determine the size of the bottle, which is necessary for the uninterrupted supply of moisture to the bottom of the pots. The size of the bottle depends on the size of the earthy clod in the pot. For example, around large pots you need to arrange several big bottles with water, but for plants in tiny pots, this method will not work at all.

Industrial irrigation devices

If funds allow you, then you can install and automatic system automatic watering industrial production. Aqua Globs are the most common, and they consist of a special glass bulb, which is connected to a ceramic cone. This cone is immersed in the substrate, thereby achieving uniform wetting of the substrate. The cone has a porous structure, from the pores water oozes into the soil drop by drop. If the tub with the plant is large, then several pieces can be used. Usually, the cones are connected to the water supply using a special rubber hose. Another industrial system that provides automatic watering of indoor plants is also popular - Gardena. The device operates with a pump, timer and tubes, it is able to provide water to up to 36 plants at the same time.

Other ways of getting water

The most popular automatic watering system for indoor plants is to connect flowers to a container containing water using makeshift wicks. You can use cords, ropes, woolen threads, as well as twisted bandages. One end of a homemade wick is lowered into a basin or other container of water, and the other end is attached to a pot, fixing it in the ground with a peg or clothespin. A difference in capillary pressure is created, due to which water flows through the wick from the basin into the pot. Automatic watering of indoor plants using wicks is a very effective and common method of continuous moisture supply.

Automatic watering safety

To completely eliminate the possibility of the soil drying up in pots during your absence, both home-made and industrial automatic watering systems should be tested in advance. For example, it is worth checking how well a homemade wick conducts water and how much water is in the basin. It can easily turn out that a basin of water will be empty in a day, and this is inevitable death for your flowers. It is very important to decide in advance and the right size bottles so that your plant has enough moisture for the time you are away. You should also decide on the height at which you need to put a basin of water so that the water passes well through the wicks.

Capillary mats

An excellent solution for providing water to plants is capillary mats, which are mats made of hygroscopic material. You can see capillary mats for sale in many specialized shopping malls they are relatively inexpensive.

You can spread this capillary mat over any surface, such as big table or wide window sill, but at the same time one end of it should be lowered into a container of water. Under the rug, it is imperative to lay an oilcloth so as not to spoil the surface of the table with moisture. If you cannot lower one of the edges of the mat into a container with water, then you can cut off strips from it, moisten them with water, and then put one end under the mat, and lower the other into the container. These stripes will work like homemade wicks and conduct water. For automatic watering of indoor plants, pallets are also produced that work like capillary mats. They consist of a deep tray and a shallow inner tray, as well as a capillary mat. IN big pallet pour water, put in it a small pallet, which is lined with a rug, and then put flowerpots on it. The rug will always draw water. This watering is good because the flowers are guaranteed not to start rotting the roots.

Finally

Having considered in detail all the proposed options for automatic watering of indoor plants, you will undoubtedly choose the most suitable one for yourself, which will help you protect your favorite plants from drought. If you don't have the funds to buy industrial system production, then you can quite make such a device yourself, which will be no worse. Thanks to the considered methods, you can easily organize automatic watering. Petersburg, Sochi, Paris and other amazing places on earth are waiting for you! Travel without worrying about your plants getting in trouble.

But there are other methods of getting out of this situation: to keep the moisture obtained with the last watering (this method can work at most within 2 weeks and practically does not require financial costs) or equip the system automatic watering.

Ways to create automatic watering systems, irreplaceable in the event of a long absence of owners, there are many. They can be both budgetary and quite expensive.

Keep moisture at the lowest cost

First, let's look at a way out of the situation from least cost . This method is very simple, but it is advisable to use it only in extreme cases He has too many cons.

So, to organize the simplest moisture conservation system, you need to water the plants well, best of all immersion method root together with a lump in the water.

Remove pots from windowsills: the weaker the lighting, the less moisture evaporates, and the less the plant consumes it. Of course, no light growth will slow down, tender plants may be oppressed.

Cut buds and flowers, if possible, thin out the green mass - this is also necessary to reduce consumption water. Of course, the loss of decorativeness in this case is inevitable, and many plants recover for a long time after such an execution.

Compose all pots closer to each other, preferably in one container - for example, in a bath or a large basin. At the bottom, pour a five-centimeter layer of expanded clay, fill it with water. We put the pots, in between them laying pieces of wet sphagnum.

We cover the structure with a film. The most tender specimens can be placed in individual greenhouses.

Keep in mind that being "under the hood", plants with pubescent leaves (saintpaulia, pelargonium) can become moldy and rot.

Another minus - after they will have to again get used to the open air, opening the film in stages or reducing the humidity in the room.

Tips for creating automatic watering of indoor plants using pallets, see the video below:

The simplest drip irrigation

The system described above will be viable longer if it is provided with moisture source. You can make small holes in the caps of plastic bottles, turn them over and place them between the pots, making sure that moisture seeps out drop by drop.

Bottles can be stuck directly into the ground. Capacity of each bottle selected individually- 0.5 l is enough for one plant, and for large plants in tubs, you may need several 2-liter bottles.

Despite the simplicity and artisanal nature of this method, there is production devices operating on this principle.

They consist of glass flask, connected to a container immersed in the ground for uniform distribution of moisture.

The Austrian irrigation systems which can be purchased in our stores.

Wick system

This is a well-known method - connecting to the irrigation system through improvised wicks made from any laces, ropes, etc. One end of the wick is lowered into a basin of water, the other is fixed in a pot (you can use an ordinary female hairpin or a wooden peg).

Most reliable way - pass the wick through the hole in the bottom of the pot before planting the plant. All plants can be equipped with such a system in advance if you often leave the house.

The material for the wick is needed in this case is selected synthetic. Thus, water will drain into the ground due to capillary pressure difference.

Everything homemade systems need testing: water should drain with the desired intensity - this is regulated by the height of the water container relative to the pot.

Watch the video for a master class on making the Wick automatic watering system at home:

Hydrogel and granular clay

Well hydrated granulated clay or hydrogel(buy from garden centers) are also used for sub-irrigation equipment. These materials have ability to absorb a large number of water, and then gradually give it to the roots of plants as needed.

Lumps of clay in granules are placed in a separate pot (selected in a larger size), and then a plant with an undisturbed lump is transplanted into it, covered with a thick layer of clay (hydrogel) from all sides. Then the soil is covered with polyethylene.

Droppers

Another not too expensive way of automatic watering can be arranged using medical droppers and a large plastic water can (5-6 l):

1. Buy droppers at the pharmacy at the rate of one for each flower.
2. Remove the tips and check each for integrity (purge).
3. Fasten the ends of the droppers together without pinching the tubes, and make the structure heavier with something. The tips should lie at the bottom of the jar and not float.
4. Put the jar on a hill, and the flowers - below. Dip the fastened tips into a jar, and the ends of the droppers into pots.
5. Open the regulator on the droppers and immediately cover them with the regulator, setting a slow drip of water.

colorful cones

Original watering came up with domestic producers- multi-colored cones that are filled with water, inserted into a thin stem and stuck into the ground.

As the earth in the pot dries out, oxygen enters the stem, pushing just as much water out of the flask, how much does a flower need.

Perfect fit for irrigation home plants, as well as greenhouse, garden, etc. This method has its advantages:

• practicality and originality of the solution;
• additional interior decoration;
• no threads, droppers, complex structures- everything is beautiful and simple.

Capillary mats

IN flower shops sell rugs made from hygroscopic materials- so-called. capillary mats. They can be spread on any surface by lowering one edge into a container of water, and then set the plants on the mat.

Sometimes capillary mats sold as a set with 2 trays: water is poured into the outer tray, an inner tray with holes is inserted into it and a mat is laid. Manufacturers of this invention guarantee the watering of flowers within two weeks, and without rotting of the roots.

How to create a do-it-yourself automatic watering system for indoor plants, see the video:

By and large, you need to choose from two options: make an irrigation system yourself or buy a ready-made one. After analyzing them, you will surely find the best solution for you.

But don't forget and about the old proven way- to transfer your pets to the reliable hands of a person whom you completely trust.

Still, it is he who remains the most reliable.

How to take care of soil moisture for indoor plants before weaning from home for long time? Useful automatic irrigation system.

Micro-drip devices for automatic irrigation

For a collection of plants in the same room, on a balcony, loggia, patio or in a greenhouse, garden micro-drip systems of automatic watering. This " younger brothers"gardening systems, described in detail in the article. Micro-drop devices are connected directly to central water supply. Water is supplied and turned off at a predetermined time thanks to the built-in timer. When leaving on vacation or a business trip, you don't have to worry about the fate of the "green lodgers".

The best option for a house or apartment with an average collection of up to 30 plants - micro-drip irrigation systems with reservoir . Many tubes come out of the tank, through which water enters the droppers. The latter are plastic or with a ceramic tip, which is stuck directly into the ground.

ON THE PICTURE: Micro-drip irrigation system with a reservoir for a collection of up to three dozen plants.

A conventional dropper is manually adjusted with a special wheel. Its scrolling regulates the intensity of watering, for example, up to 20 ml. (20 drops) per hour.

Advanced ceramic tips act as soil moisture sensors. Depending on the moisture level of the soil, the droppers supply water or stop watering.

Ceramic cones

Popular among flower growers ceramic cones. These are kind of "carrots" from which plastic tubes extend. "Carrot" is stuck into the pot, and the end of the tube is lowered into a tank of water. At the same time, the process of water supply is not controlled manually. Moisture is drawn from the pressure vessel each time the earth dries out.

Producers of "carrots" unanimously speak about high quality and device reliability. However, the bad experience of some flower growers has shown the opposite. Ceramic cones clog easily, sometimes do not form desired pressure. Have to look right place for a water tank to create this very pressure. But even here a problem arises: if you install the tank too high, there is a risk of flooding the plant, too low - the water may stop flowing altogether.

ON THE PICTURE: Ceramic cones are not very reliable, because. often clog and do not always provide the desired pressure.

In the absence of free space to install a vessel with water near the plant, use ceramic bottle cap. Advantage this method- ease of use. Attach the nozzle to an ordinary plastic bottle filled with water, insert it into the pot and forget about watering. The device will control the water supply itself, and the plant will receive exactly as much water as required. This is a great economical option: when using large two-liter bottles, you can forget about watering for a whole month.

ON THE PICTURE: Ceramic nozzle on the bottle - a simple and economical option for automatic watering.

There are decorative variations of ceramic cones in the form of animals, birds, butterflies, etc. They look very cute and are able to enliven the interior. But, unfortunately, such "toys" are not suitable for irrigation: because of the small volume, you will often have to add water.

enema balls

Outwardly, "enemas" look like spherical flasks with watering pipettes that are filled with water and inserted into the pot. When the soil begins to dry out, oxygen enters the stem of the flask and pushes out plant needs amount of water. In general, "enemas" are a good option for automatic watering, but they do not dose water well and sometimes flood the plant.

ON THE PICTURE: Enema balls provide watering of the plant and look original in the container.

self-watering pots

The self-irrigating pot consists of two containers. A plant is planted in one of them, water is poured into the other. The plant gradually absorbs moisture through special wicks.

ON THE PICTURE:"Smart" containers cope with the function of automatic watering of plants. Photo Tatura Florist.

Such a container is usually equipped with a water indicator. This allows you to accurately determine how much moisture is left in the pot and when you need to top it up. Technology self setting a similar irrigation system is shown in the video: "".

Do-it-yourself automatic watering organization: three simple ways

Automatic watering of a collection of plants can be organized independently, and for a short time and without significant material costs.

1st way

You will need: several hospital droppers according to the number of plants in need of watering, a 5-liter plastic bottle, an elastic band or wire for fastening the ends of the tubes.

How to do:

1. Remove the needle tips from the droppers.
2. Check droppers for integrity by blowing into them. If the tubes are not damaged, they will be well blown from both sides.
3. Connect the ends of the tubes together and tie them with an elastic band or wire. So they will lie quietly at the bottom of the bottle, and not float on the surface. try do not pinch the tubes .
4. Dip the tied ends of the dropper tubes into the water bottle and place the bottle as high as possible.
5. Open the dripper regulator by running water through the tubes, then immediately close it.
6. Insert the free ends of the straws into the pots and use the wheel to adjust the amount of incoming water.

ON VIDEO:In addition to droppers, medical syringes are suitable for creating home-made irrigation devices. From such a syringe, a plastic bottle and a PVC tube, a drip irrigation device is obtained.

2nd way

You will need: plastic water bottle. The size depends on the root ball of the plant. For a tub, several medium-sized bottles are taken, for a compact pot - one is small.

How to do:

1. Make small holes in the bottle cap.
2. Place the bottle upside down in the container with the plant.

ON THE PICTURE:Automatic watering from a bottle, plastic or glass, is also good for indoor seedlings. Photo by Megan Andersen-Read.

3rd way

You will need: nylon cords or laces, woolen threads, twisted bandages or any materials from which wicks can be made; a basin or bottle filled with water; peg for fixing the wick.

How to do:

1. Twist an impromptu wick from improvised materials.
2. Dip one end of the wick into a container of water.
3. Secure the other end to the plant container with a peg or other means.

ON THE PICTURE:Wick automatic watering will keep healthy and fresh. Photo by u/skysong4.

1. Micro-drop automatic irrigation systems with connection to central water supply preferred for medium to large plant collections.
2. If the water supply is blocked during your absence, a micro-drip system with a reservoir is recommended.
3. for watering individual plants use bottles with ceramic nozzles - simple, cheap and effective. One container for 2 liters. enough for about a month of watering.
4. If the irrigation system is not equipped with a soil moisture sensor, it is better to purchase one separately. The presence of such a sensor will save plants from the destructive waterlogging of the earth.

Gone new year holidays, the results of the past year have been summed up and you can safely take on new and interesting things. And I want to talk about the dream of almost all women: the automation of watering flowers.
One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. And I will tell you the technology of its work and the reliability of its functions under the cut.

At SID Display Week 2016 in San Francisco, E Ink introduced e-ink color screens. The new technology is called Advanced Color ePaper (ACeP) and uses pixels with pigments of eight primary colors, so that the image on such a screen does not differ from the image printed on plain paper. Such screens are capable of displaying 32,000 colors, while a similar technology from Triton allowed only 4,000 shades to be displayed. Pixel density in ACeP displays can reach 300 ppi.

According to the rating among women, automatic flower watering is somewhere between a robot vacuum cleaner and automatic control aquarium. Well, since there is no aquarium yet, and the robot vacuum cleaner is already rolling, it was decided to tackle the problem of automatic watering. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. This device is relevant all year round.
The essence of this device is to automate the simplest operation: watering flowers. If you look at the components, then there is a countdown timer, a pump timer, a pump and tubes. At the appointed time, according to the cycle, the pump turns on and runs for as many seconds as it will be given. The pump itself is programmable from 1 to 99 seconds of watering, with a minimum cycle time of 0.1 days or 24 minutes and a maximum of 30 days or 720 hours.

Nutrition
It is worth noting that the device is non-volatile and does not connect to a power outlet. Instead, the device is equipped with four AA batteries. The batteries themselves are not included in the package, and depending on the frequency and duration of the pump, the device can work from one set of batteries up to 6 months.

Setting
After installing the batteries and turning it on, you need to configure the device. The setting is reduced to several actions: the transition to the next setting element is carried out by the "Set" button, the current parameter is changed by the "+" or "-" buttons, and the start or performance check is performed by the "Test" button.

Completion and launch
The package includes the control unit itself, combined with the pump. Green hose 10 meters long to independently distribute the length to the pots, 1 meter black hose for connecting drip irrigation, 10 drip irrigation dispensers and 10 springs to fix the hoses in flower pots.

Connecting hoses to the manifold. If you do not need to water 10 pots at once, you can plug a loose collector with a stopper.

Drip irrigation dispensers allow you to vary the amount of liquid entering the pot.
The black hose is designed to extend dispensers up to flower pots. Its length is 1 m. The set includes 10 dispensers. In this it differs from the Green Helper, which do not include dispensers and a black hose. Dispensers use water more rationally and economically and ensure optimal watering of plants.

The locking spring will allow you not to worry that the tube will jump off and water will not get to the consumer.

This is how the device looks in working order.

Testing
Keeping in mind that each plant requires its own amount of water, it may be necessary to install and calibrate drip irrigation. In addition, during the testing process, it became obvious that if you use 10 flower pots, then they can stand no further than a meter from the device, since only 10 meters of hose are included in the kit. Well, the assembly and start of irrigation can be seen on a small video.

Conclusion
It is worth noting the simplicity of the device, and hence the small number of points of failure. Before leaving on vacation, you should leave enough water (by the way, the pump stops working without water), insert new batteries and set up automatic watering. Complex systems include setting the irrigation of each channel, but we are talking about simple and understandable devices. Yes, and the launch of this device took no more than 10 minutes from the moment of unpacking and until the start of irrigation.

The device "Autoleica" is available for sale at the following link.

- Share news on social media networks

At SID Display Week 2016 in San Francisco, E Ink introduced e-ink color screens. The new technology is called Advanced Color ePaper (ACeP) and uses pixels with pigments of eight primary colors, so that the image on such a screen does not differ from the image printed on plain paper. Such screens are capable of displaying 32,000 colors, while a similar technology from Triton allowed only 4,000 shades to be displayed. Pixel density in ACeP displays can reach 300 ppi.

Lenovo Link will help you to cast an image from your Android smartphone to your PC

Now almost every user has a smartphone, and many, in addition to it, have also acquired a tablet. These devices are wide enough functionality and allow their owners to solve a wide variety of tasks. With this thought, Lenovo introduced a new device - a small gadget that is comparable in size to a flash drive. With Lenovo Link, users can connect their Android mobile device to a PC and use the computer to control the smartphone while displaying the image from the mobile device.

Palette Cube can recognize the color of almost any surface

The Australian company Palette decided to create a new gadget for designers and artists. Palette Cube is a color recognition tool. The novelty works almost the same as the "dropper", which is in all graphic editors. With the help of the new gadget, users can quickly recognize the colors of real objects. The recognition process is quite fast, and thanks to small size You can always carry your device with you. Using Palette Cube is very easy.

ASUS G11CD and ROG G20CB are fully compatible with Oculus Rift

ASUS has announced the start of cooperation with the Oculus team. As part of this partnership, both manufacturers will be demonstrating what the ASUS G11CD and ROG G20CB gaming desktop systems are capable of. Computers are equipped with sixth generation Intel Core processors and NVIDIA GeForce GTX graphics cards. The manufacturer claims that both systems are completely ready to work with Oculus Rift- the user only needs to connect the headset to the computer, download and install the necessary drivers.

Scientists have developed a technique for printing two images in one

Surely many of you remember the once popular holographic pictures, which are under different angle showed other images. Researchers at the École Polytechnique Federale Lausanne (EPFL) have developed a special printing technique to create such "changing" pictures. To do this, the printer combines two pictures on one plate, and if you look at it from one angle, we will see one image, but as soon as you turn it 90 degrees, the picture will change to another. The printer applies ink in the form of tiny dots using a special technique.

LG introduces new Super UHD TVs in Russia

LG Electronics announced the appearance on Russian market new line of Super UHD and UHD TVs. Their resolution is four times higher than that of models with Full HD screens, and the number of displayed colors is 64 times more than conventional LED matrices. In addition, new items support Dolby Vision and HDR Pro technologies, which provide enhanced dynamic range and a richer picture. In addition, Super UHD models are brighter and brighter thanks to ColorPrime Plus technology. natural shades colors.

Microsoft plans to significantly increase the battery life of laptops

The Microsoft Research Lab is constantly developing new technologies. The company talks about some, while others do not leave the walls of the laboratory. This week, an article about a project to increase laptop battery life appeared on the official Microsoft blog. The research team has developed new technology, which allows laptop and tablet batteries to last longer through the use of "smart" software.

OnePlus 3 update fixes RAM issue

Immediately after the presentation and start of sales of the new OnePlus 3 smartphone, the Internet was filled with user reviews that the device, although equipped with 6 GB of RAM, but at the same time keeps open in background no more than 3-4 applications. CEO OnePlus Carl Pei explained that they did this intentionally in order to improve the autonomy of the smartphone. He also added that developers can use the kernel source code that they have made publicly available to set the RAM management in custom firmware at their discretion.

Sony PlayStation 4 Neo release will not be a transition to a faster console update cycle

During Sony Investor Day in Tokyo, Sony President Andrew House shared an update on the new generation of Sony PlayStation 4 Neo game consoles. He said that the release of the novelty will be the first time the company makes an upgrade of hardware in the middle life cycle console. Meanwhile, Sony is no longer going to release regular updates to the PlayStation, as they do with smartphones and PCs. The company also does not seek to update the hardware "stuffing" with each generation of branded consoles.

Comments:

Top News

- www.geektimes.ru

econet.ru

According to the rating among women, automatic watering of flowers is somewhere between a robot vacuum cleaner and automatic control of an aquarium. The essence of this device is to automate the simplest operation: watering flowers. If you look at the components, then there is a countdown timer, a pump timer, a pump and tubes. At the appointed time, according to the cycle, the pump turns on and runs for as many seconds as it will be given.

- www.itnan.ru

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

Auto-watering flowers: automating regular tasks / Geek magazine - sohabr.net

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

- www.pvsm.ru

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

- atmega328.ru

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

- savepearlharbor.com

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

- pcnews.ru

Autowatering flowers: automating regular tasks / Blog - archive.ec

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

June 7, 2016 at 16:07 nn n n Another automatic sprinkler - www.pvsm.ru

Yes, I'm not an innovator, and others have already offered a sea of ​​​​their options here and there: rnrnrnWe water the flowers - simply and quickly indoor flower on Arduino in 15 minutes rnAutomatic flower watering: automate regular tasks rnIoT Code Examples: Smart Sprinkler rnrnThere is even some evolution.

- blog-info24.com

News from the category: Technologies. Autowatering flowers: automate regular tasks. The New Year holidays have passed, the results of the past year have been summed up and you can safely take on new and interesting things. And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store.

- www.pvsm.ru

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

Autowatering flowers: automating regular tasks / Blog - archive.is

And I want to talk about the dream of almost all women: the automation of watering flowers. One of the gifts for New Year's was a set of automatic watering flowers "Avtoleika" from the online store. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

Another automatic flower waterer on Attiny13A - geektimes.ru

Another automatic flower waterer on Attiny13A. DIY or DIY*. This is my spiritual impulse to make the world a little better, especially the part of it that is closest to me. Yes, I'm not an innovator, and others have already offered a sea of ​​​​their options here and there: Watering flowers - simply and quickly. Smart flower waterer on Attiny13A microcontroller. To the question of "smart watering" on the microcontroller. We do auto-watering of indoor flower on Arduino in 15 minutes. Autowatering flowers: automate regular tasks.

Autoleica: an overview of the capabilities of the autowatering system / Geektimes - geektimes.ru

There is a task - watering mother's flowers when she leaves for a long time. It can be solved by going to her every few days, but there is not always time and opportunity for this. A solution is needed to automate this process. I have already started to build combinations of arduino and water pumps in my mind through final relays or systems solenoid valves 3/8 inch and electric programmable timers… Automatic Flower Watering: Automating Regular Tasks 11k 68 40.

- pcnews.ru

Auto-watering flowers: automating regular tasks 01/12/2016 12:22 pm. The New Year holidays have passed, the results of the past year have been summed up and you can safely take on new and interesting things. And I want to talk about the dream of almost all women: the automation of watering flowers. Moreover, the New Year holidays involved a lot of travel, which means there is especially no time to follow the flowers. Such a device is relevant all year round. The essence of this device is to automate the simplest operation: watering flowers.

We make auto-watering of indoor flower on Arduino in 15 minutes - www.pvsm.ru

Autowatering flowers: automate regular tasks. After my next flower died, I realized that it would be nice to somehow automate the watering process. Without further ado, I decided to assemble a structure that would water the flower instead of me. As a result, I got such a device that does its job quite well.

Automatic watering system. Automatic watering of flowers and plants. - guide-str.ru

There is no automatic watering of flowers and plants. Well-organized area various forms landscape design certainly awe-inspiring. What are the systems automated irrigation? To quickly cope with the task of choosing equipment, carefully read the varieties of irrigation equipment that exist today and recommendations for a more rational use.

Irrigation system designed for watering indoor plants clean water indoors and should not be used for industrial purposes.

Advantages of this automatic watering:
One of the best autonomous systems which allows you to leave home plants unattended for a long time.
Several hoses for plants of different lengths
Battery powered
Convenient setting of watering time and frequency of switching on
Has no analogues in this price segment

The principle of operation of the automatic watering system for domestic plants and the power of uniform watering!

1st day. System installation

7th day after system installation

14th day after system installation)

Characteristics and equipment:
The watering timer itself with a mount - 1 pc.
Hose 4/6 mm - 10 m
Tee - 10pcs
Thursday - 3 pcs
Through coupling - 3 pcs
Hose cap - 3 pcs
Irrigation drip - 10 pcs
Filter for water purification - 1 pc.

Also, if you want to extend the system, we have an expansion kit for 5 plants price - 250 rub

Expansion kit complete set:
Irrigation drip - 5 pcs
Tee - 5 pcs

Many are fond of growing indoor plants. This activity is not only interesting, but also quite a useful hobby. It calms nervous system, perfectly relieves stress, gives impetus to self-improvement and new knowledge. Success in growing indoor plants can only be achieved with systematic watering. But it's not always possible to do so. Business trips, work, and many other reasons that do not allow watering plants at a certain time. An automatic irrigation system is ideal for solving this problem. Having such a system, you should not worry about the condition of your favorite plants during your vacation, business trip. Rest assured that your plants will receive required amount nutrient moisture. The system can be installed on a water tank using a special bracket or mounted directly on a standard plastic bottle. Requires 4 AAA batteries to operate (not included).

There is no need to connect to a water tap. The automated irrigation system is extremely compact. So it does not take up much space in the apartment. Watering is carried out drip method based on a human-defined schedule. One such system can water up to 10 indoor plants. The device works reliably and efficiently. If you use a large capacity, Easy Grow-10 will independently decide main problem- delivery of the required volume of water for the normal life of indoor plants. So such an automatic irrigation system can be not only a temporary lifesaver, but also work on an ongoing basis.

PREPARING THE SYSTEM FOR WORK

Cut the hose to the lengths you need. Using tees, splitters, connectors, plugs and drippers, assemble the irrigation system of the desired configuration and connect it to the top fitting of the controller. Assembly of the system will be greatly facilitated if the ends of the hoses are preliminarily held for several seconds in hot water. Connect a piece of hose with a filter to the lower fitting of the controller. Attach the bracket to the controller and attach it to the water tank as shown in the left figure. For water, you can use a plastic bottle, as in the right picture. In this case, you do not need a bracket.

Open the cover at the bottom of the controller, slide out the battery pack and install four AAA 1.5V alkaline batteries into it.

You will hear a short beep, and you will see the test passing on the digital indicators.

CONTROLLER CONTROL PANEL

- Digital indicator WateringTime(Watering duration) indicates how many seconds the pump will run. You can set the duration of watering from 1 before 99 seconds.

- Digital indicator IntervalTime (Irrigation frequency) indicates how often the pump will be switched on. If you set the value 0,1 , then watering will occur every hour. If set 1 , the pump will turn on every day.

If 2 then once every two days. Maximum value - 30 , i.e. once every thirty days.

- Left button sets value Watering duration. Pressing the button once increases the duration of watering by 1 second, and pressing and holding the button for 10 or a multiple of ten seconds time.

- Right button sets value Irrigation frequency. By repeatedly pressing this button, you can set the frequency of watering from 0,1 before 30 days.

- Button turns the pump on and off in manual mode, and also turns on the digital indication on the control panel.

To turn on the pump manual mode, you need to press this button twice - after the first press, the indication will turn on, and after the second press, the pump will turn on. A third press of the button turns off the pump.

- Led indicator shows what mode the controller is in:

Flashing fast in green- controller irrigates

Slow blinking green - the controller is working according to the set program

Solid green - the controller is being programmed

Solid red - Batteries are low and need to be replaced.

CONTROLLER PROGRAMMING

1. Press the button The display on the control panel lights up - the system is ready for programming.
2. Set with the left button Watering duration in seconds.
3. Right click set Irrigation frequency in days.
4. After a few seconds, the controller will turn on the pump and the first watering of the plants will begin, during which the LED will flash green rapidly. At the end of watering, the controller will go into standby mode - the LED will flash green slowly until the next watering.

System configuration

Control unit (Timer - 1 pc.), Hose - 10 meters, Filter - 1 pc., Tee - 10 pcs., Cross - 3 pcs., Hose connector (Double) - 3 pcs., Droppers - 10 pcs. Plugs - 3 pcs.