Projects of timber baths. Interesting projects of baths from a bar
Baths from a bar are the same capital buildings, which can only be built according to a pre-prepared project. Having a ready-made sketch and calculation of materials on hand, you can make a reliable and beautiful structure from this material. Next is a photo selection of projects of baths from a bar.
Interior decoration made in the style of minimalism. The dimensions of the rest room are comparable in size to the shower room and steam room.
A beautiful appearance and a competent arrangement of all functional premises distinguish this project. 
At the entrance there is a terrace from which a door leads to the vestibule. Spacious lounge, small shower, toilet and quite a large steam room. Special attention to the furnace. It adjoins the steam room and you can enter it directly from the rest room.
One roof slope gently sloping and covers a small vestibule. original solution in planning. 
In addition to the main premises, there is also a kitchen.
Individual project. 
Beautiful exterior finish, with good layout interior spaces.
The project is made in an individual style. Foundation laid out decorative stone. At the entrance there is a veranda and a small attic floor.
Despite the small external dimensions, there is enough space inside. Tambour at the entrance, a spacious lounge and a steam room with a shower.
Outwardly, the building looks like a tower from Russian fairy tales. In the project, the slope is made on an individual basis. appearance.
Inside there are no flaws in the layout of the premises. As with most projects, large room rest, bathroom, shower room, steam room and furnace.
original layout with attached porch. Inside there is everything you need for a bath and a separate living room.
Unusual location. There is everything you need for washing and relaxing.
From the photo, this project looks more like a residential building. The fact that this is a bath, you can find out only by going inside. 
Actually, the layout suggests that this is also a residential building. Inside there is a living room, two bedrooms and a kitchen.
Give me a bath...
Previously, in Russia, baths were heated in a black way, that is, stoves without a pipe were used to heat the room and heat the water. But it is unlikely that you are a connoisseur of primordially Russian traditions, because the “black-style” bath has a number of significant shortcomings: it is constant soot, smoke and carbon monoxide. Some people are looking for an alternative to stoves in the form of electric heaters. But it's also not the best. the best way for those who like to take a steam bath, because electric heaters do not produce such saturated steam. Although, their installation does not imply the presence of an outlet pipe, and the performance of a number of actions.
The wood stove is perfect solution for connoisseurs of light steam, because they are unpretentious in operation and can work on the very accessible form fuel - wood. Yes, you have to arrange exhaust chimney and build a furnace, which can be both brick and iron. But if you decide to build a bath house, then the construction of the stove may be in question, because in such cases an electric heater will still be more appropriate, although a lot depends on the project.
House-bath as a win-win option
The decision to build a house-bath is made in several cases:
- With limited area.
- With the limited financial capabilities of the customer and his persistent unwillingness to "go into debt".
- If the customer is "a little lazy" and wants "everything to be in one place."
The bathhouse is a unique building of its kind, since technical and leisure facilities (steam room, shower room, washing room, utility rooms, bathrooms, kitchen, living room, gym) can be placed on the ground floor. The second floor can easily be used as living space. But before giving preference to a specific project (and there are a lot of them in our collection) and materials, it makes sense to decide on a place for building the future "bath-residential" complex. It is worth noting that for permanent residence it is quite possible to adapt the attic, provided that your family is not too large.
The place for construction is chosen based on specific circumstances, and at the same time such factors as: the relief of the site, the presence / absence of outbuildings, fire and sanitary requirements, etc. And, according to our designers and architects, the best place for the construction of such a structure is the shore of some reservoir - natural or artificial. If it is not available on your site, then we can build nice pool. If possible, you can build a house-bath and on a hill.
Bath house project
Room layout may vary. Usually, on the ground floor is located:
- Steam room. Dimensions depend on the number of possible visitors, the number of shelves and the size of the oven.
- Dressing room. At its core, this is a rest room designed for changing clothes, storing firewood and bath accessories such as brooms, ladles, sheets, towels, etc. Armchairs, sofas, tables and other pieces of furniture that promote relaxation can be installed in the dressing room.
- Washing room or washing department. It is served cold and hot water, which can be heated by a boiler or stove.
- Utility rooms. Designed for storing inventory and other things, they can also be installed washing machine, for which you need to take care of the availability of power supply, sewerage and water supply systems.
- Kitchen-living room-dining room. Can serve as a continuation of the rest room.
- Bathrooms. Ideally, they should be available on both the first and second floors.
The presence of other premises is determined by the size of the structure. For example, a terrace or veranda can be a continuation of the first floor. But the second floor is residential, and there are bedrooms and a living room. It remains to be added that the bath house is an atypical structure and in some ways even “extreme”, so its construction must be approached very responsibly. By giving preference to our company, you can be sure that everything will be done to the highest standard.
What materials are best to build a bath?
The simplest and cheap option is construction frame bath, because it can be exploited immediately after construction. But there is also a more expensive and technically difficult option implying the construction of a brick bath. It is noteworthy that such a design will be safer in terms of fire, but it has a high thermal conductivity and heats up slowly. Also, the construction of a brick bath implies the construction of a more solid foundation. If for some reason such designs are not suitable for you, then we suggest considering the option of building a bath from traditional materials- beams and logs.
Log baths are the oldest and most common type. And the main task that the builders face is to choose the right diameter of the logs. If they are thin, then this will lead to increased heat loss, and if they are thick, then this will create inconvenience during installation. The best option- logs with a diameter of 24 cm. Bar baths are also classified as common, due to the availability of the material. For these purposes, we use glued or profiled timber made from northern coniferous wood. This is a very important aspect, because northern trees grow slowly, and therefore have more high density than their southern counterparts. This circumstance seriously slows down the process of decay, which is necessary, given the specifics of the object.
The construction of the bathhouse of your dreams should begin with a competent project. Majority standard solutions, despite their availability, cannot satisfy all the requirements and wishes, take into account all the needs of the future owner, do not reflect his personality. Each person puts something of his own into the concept of rest, and rightly so. organized space will allow you to spend time in the bath with maximum benefit and relax most productively. If you want the bath to be comfortable, cozy and please you long years, right decision will resort to the development of an individual project, and we will be happy to help you with this! Our company has extensive experience in creating projects of any complexity, and in some cases we are ready to offer special conditions for its development.
Projects of wooden baths
The best projects of bath complexes for you!
Projects of baths from glued beams are one of the most popular among all projects. wooden baths. There are several reasons for this demand. The main one, of course, can be full responsibility name big choice diverse architectural solutions, which can be realized when using glued laminated timber as the main material for construction. Thanks to this, in projects of wooden baths it is easy to deviate from the standard for log or panel buildings"cages" and create a more complex space.
The second reason for the popularity of projects of baths from glued beams is the presence in them decorative elements, which do not affect the cost of building a structure. This is facilitated by both the material itself as such, and the features of the technology for the production of baths according to the project. As a result, in the projects of baths from glued beams, it is possible without special costs to realize such quite interesting and functional structural elements like portable gables, covered terraces etc. This directly contributes to the diversity of architectural solutions. Another reason for the popularity of wooden bath projects, of course, is the craving for environmental friendliness, which can only be realized in a bath project using natural materials. These include glued laminated timber, which combines exceptional manufacturability and all the properties of natural wood.
The Brusbani company offers its customers a huge number of ready-made and thought out to the smallest detail projects of baths made of glued laminated timber, made in a variety of styles. Their main feature is high technology, thoughtfulness and originality. It is important to emphasize that all of them have been implemented more than once. This is a complete guarantee that absolutely no problems will arise during the assembly of the bath according to the project. In addition, the Brusbani company strictly observes the agreed deadlines and other obligations assumed. We are truly trusted!
From glued beams are now very popular. We will tell you about the features of such a building, as well as what materials to choose and how many stages to distribute the construction process. After that, you can easily create your own building for a bath and sauna on your own.
Wood as a building material
Projects of baths from glued beams, indeed, are now experiencing the peak of their popularity, but what do we know about this type of building. Nowadays, there is an incredibly huge amount of building materials. Still, from the environmental point of view, definitely best material is wood. Even our ancestors, in search of the ideal raw material for the construction of shelters, preferred wood. It immediately becomes clear why this is so. After all, indeed, this structure is very common and has all the qualities that extend the life of the structure. But if earlier the main type of structure was, then in our time there is an incredible amount of building products made of wood.
And, however, here is what is worth noting among the features of wood as a building material:
- very high value constructive quality factor;
- high chemical resistance;
- plastic;
- absence of seasonal restrictions in carrying out construction work.
The advantages can be listed for a very long time, and many people who want to build or opt for wood. However, the most quality look wood products is .
Glued laminated timber
No matter how many advantages a tree has, as a building product, however, it also has negative sides:
- the formation of natural defects;
- mechanical ability depends on temperature and humidity;
- cracking.
In order to solve these problems, scientists are constantly developing new types of products from this material. So one day there was construction material like glued timber. And at one moment he solved many problems of a constructive nature: both increased shrinkage and the formation of cracks. Each of the parts perceives loads and shrinkage differently, which helps to avoid destruction.
As for the production technology, it is not too complicated, but it also has certain nuances. The main material for creation are conifers trees such as pine. But, each region of any country has a certain forest cover, which dictates the need for a certain type of wood. So cedars and firs are also used. As for the production technology itself, several stages are distinguished for it. To begin with, ready-made logs are sent to the sawmill in order to form boards of certain parameters from them. After that, in order to protect the product from impact various factors, they can be processed by special means. At the exit, separate parts of the future building material appear, which are called lamellas. Each lamella is brought to the workshop, where it is tied together using heavy-duty presses and adhesives. right amount boards.
And, in order for the building to take the load perfectly, the neighboring boards must have opposite direction annual rings. In addition, in order to preserve the ability of wood to breathe, gluing is carefully carried out, with the possibility of preserving free pores. Having assessed the above features, it can be noted that it is not surprising how popular this particular building material is in our time. And the most common.
Projects of baths from glued beams
A bathhouse made of glued laminated timber is the most ordered in our time. And no wonder, because a home bath is not only a great opportunity to relax after a hard week, but also a bright pastime with family and friends. But, if everything is fine at the idea stage, then when the design time comes, the main difficulties come. Often people simply do not know where to start, how to calculate and how to make sure that the design will serve faithfully for a very long time.
Do not be upset, because in our time on the network you can find many specialists presenting their projects and their prices in one section. So you can estimate the amount of work and costs that you will have to bring to the creation of the desired structure. Catalogs, at times, contain an incredible amount of informational photos. And if you do not have a specific idea, then on such sites you can find inspiration and learn the basics of design from professionals.
Advice! Even if you decide to design a building yourself, it is still worth seeking the advice of a qualified engineer so that he tells you exactly how to start designing and how to carry out the work.
Projects of houses and baths from glued beams are the most difficult stage in the creation of a structure. After all, the construction itself takes very little time and is more like creating a house from a constructor.
Construction process
The first step is to decide what shape you want to give your future bath, what compartments you will create in the building, how many people it will have to accommodate. It should also be noted that the bath is a room with high level humidity, and wood, unprotected from the effects of steam and water, may suffer, becoming covered with fungus. Having thought over these nuances and having decided on the perimeter of the structure, you can proceed to the design stage. Separately, you need to create a foundation project, and then the projects of the necessary floors.
After the creation of the project, it is necessary to carry out detailed planning work. At this stage, you need to decide how much material is needed, what tools will be needed for this. It is also necessary to find a supplier who has favorable price you can buy required amount building materials, while having enough high quality. Here, reviews of acquaintances can come to the rescue, but you can also evaluate the quality of wood yourself, after reading the necessary literature on this topic. Various companies are already producing ready-made kits, having bought which you just have to put them together. Nevertheless, despite even the reputation of the company in which you purchased materials, it is necessary to carefully examine the wood and treat it with an additional layer of protective coatings.
When it comes to construction, first determine the type of foundation you will use. Again, this is a very important part of the structure, because not only the durability of the building, but also, possibly, the life of people resting in this bathhouse, depends on the quality of the foundations. Every master prefers different kind foundation. But this process also depends on the type of soil, the level ground water and particle size distribution. As a result, you can choose either a light fawn, or strip foundation. If you opted for a tape, then this is really the right decision. If only because such a base will withstand a system of any weight. That is, if you are not able to calculate the actual weight of the building as accurately as possible, then such a foundation is guaranteed to provide you with stability and strength.
When installing this type of foundation, it is necessary to take into account the depth of soil freezing, professionals advise installing it 20 cm lower from this depth. Since in our region the number of cycles of defrosting and reverse freezing of soils varies greatly in winter period, then such a precaution will help reduce the load on the foundation.
When all the features of local soils are taken into account, you can start marking the area and breaking it down along the axes of the building. Therefore, after this, it is necessary to dig a pit of the desired width, height and length. After it's time to place a foundation pillow in the pit, strictly along the axes. Having created a waterproofing, you can easily start hoisting the foundation blocks straight onto the pillows.
Advice! To fix the foundation blocks, it is necessary to use the highest quality cement.
A foundation is being built on a basis of sand and gravel, and the process of its creation is to be completed correct screed, as well as a layer of concrete, giving protection from external destructive factors.
Walls and building decoration
After you have completed the work related to the creation of the foundation of your building, you can begin to create the very "body" of the bath. This term includes walls with all their nuances, protrusions and holes. main system fastenings in wooden walls are the so-called cuts. These are holes at the ends of prepared logs into which opposite logs are inserted. lower part each beam must be coated with waterproofing. This is necessary because the walls of a building of this purpose are constantly exposed to water and steam. By the way, returning to the construction, it is worth noting that the pairing of logs is also a unique process and has its own varieties. But at the same time, it is worth remembering that the length of the wall should not exceed 6.5 m, since wood does not allow exceeding this norm.
Of course, after the walls have already been built, it becomes necessary to erect a roof. It starts with a truss system, this process is no different from a similar one with construction of brick buildings. If you want to build a bath with an attic, which can serve warehouse, then you need to take into account all the nuances truss systems mansard roof. The final step here will be the creation of the crate and. And also do not forget about waterproofing, which will protect your building from precipitation at any time of the year.
Advice! Don't forget about
The company "Stroy House" builds wooden baths to order. Many projects are implemented from timber. When choosing a contractor for the construction of a bathhouse, you can rely on our experience and the professionalism of the company's employees. We build beautiful and durable buildings, ideal for bathing procedures. Among them: guest, one-story and two-story, baths with or without an attic. Check out the projects that are presented on this page of the site.
Baths from glued beams on a turn-key basis
Design and construction are carried out in a complex manner. This means that you do not have to contact anyone additionally - we will carry out all the work, from discussing the concept of the project to final finishing baths. Upon completion of the work, the facility is completely ready for operation. You can call guests and use the bath for its intended purpose. It will be safe, comfortable and aesthetic. Have you been thinking about building a bath that perfectly meets your requirements for a long time? Please contact us. Don't be disappointed!
The best prices for the construction of glued beams
We guarantee the best prices for materials, project development and construction of baths. The cost is calculated individually, based on the requests and preferences of the customer, so you definitely won’t have to overpay. You can see already completed projects baths from glued beams, which are shown in the photo and make a decision without difficulty. Contact our manager and let us know that you want to order the construction of a bath from glued beams according to a standard or personal project. We can also modify any standard design documentation you like.
The optimal material for a bath is glued laminated timber
Why? Everything is very simple! Glued laminated timber has many advantages over other wood materials. Let's list just a few of them.