home

How to decorate a vase with your own hands - decor ideas. DIY floor vase: secrets, techniques and unexpected solutions

Reading time ≈ 11 minutes

Making a vase from improvised materials with your own hands is a great way to pass the time with benefit and pleasure. So you can give a second life unnecessary things, get an original little thing for the house and transform . Consider a few simple master classes on making vases from cans, glass bottles and vessels, and other containers available on the farm.

Examples of vases with their own hands.

Decor materials

In the following master classes on self-manufacturing vases will use materials that you are likely to find in your home, and only a small part of them may need to be purchased. Of course, we are talking about decorating a finished waterproof vessel, since it will be an overwhelming task for most to make a vase from scratch on their own.

You may also be interested in:
Many materials can be used to decorate a vase:

textiles of all kinds, textures, colors, including ribbons, yarn, ropes, burlap;
buttons, beads, beads, sequins;
colored (printed) adhesive tape;
enameling, glitter;
coffee beans, cereals, seeds, coarse salt;
natural plant materials: twigs, chestnuts, acorns, leaves;
sea shells, natural stones;
kraft paper, cardboard;
clothespins;
coins.

Materials for needlework.

For fastening, it is best to use a transparent glue, which, when dried, does not give a shade and does not stain the materials. And as a basis, a great variety of containers that do not let water through are suitable:

If you are not going to put fresh cut flowers in water in a vase, then the product can be made of a permeable material (cardboard base, for example, a coil or reel).

Cardboard bobbins.

Vase from a jar and twigs

To create a vase, you will need materials that you can probably find at home:

glass jar with a volume of 0.5, 1 or 1.5 l;
twine or thin rope;
a small piece of burlap;
chopped twigs of small diameter (about 0.5 cm);
glue.

Advice: glass jar can be replaced with any other cylindrical container.

Step-by-step production of a vase from twigs.

Step by step production:

Cut the collected branches with a hacksaw into segments of the same length. They should be similar to the height of the glass container.
Using twine, fasten the branches at the upper and lower ends, tying the twine into knots. As a result, you should get a kind of canvas of twigs.
Piece of burlap, lengthwise equal to the circle jars, you need to wind them on the vessel, wrap the upper ends inside the jars and glue them. A neat bottom can be left free.
Next, the canvas of twigs needs to be wrapped around the container and tied into knots.

Alternatively, you can not use burlap, but plant branches on glue directly on the jar. In conclusion, it is desirable to fasten the structure with a rope wrapped around the can in several turns. The product will look as decorative and aesthetically pleasing as in the burlap version.

Ready product.

If you use not thin branches, but thicker segments, the vase will turn out to be more rough, but no less original:

Another version of the product.

When using jute

In this master class, you also need to use a glass jar or bottle. You will also need:

glue;
twine, jute or other beautiful rope, a thick rope will also work.

Twine decor.

Manufacturing step by step:

As a result of the work done, you get such a laconic and spectacular vase with your own hands from improvised means:

Ready product.

With a fairly impressive size of the vessel, the vase can be used as a floor vase.

Painted bottle vase

This master class is also very simple and will take you no more than half an hour. Necessary materials:

glass bottle for any liquid ( mineral water, champagne, dairy products);
universal spray paint desired color.

Painted bottles.

Step by step process:

Wash the bottle inside and out, remove all labels and traces of glue.
Place the bottle on a metal or wooden rod, turn over - this will be a kind of support.
Now the container can be painted. It is advisable to use the paint in a spray can for an even and uniform layer without smears.

To get a geometric or any other pattern, pre-cut strips (other shapes) from adhesive tape and stick on the container before painting.

For a more festive and elegant look, you can use sequins of an adjacent shade. With the help of paints and sparkles, you can create very spectacular ensembles.

Glitter decor.

Sequins can cover not the entire vessel, but only part of it:

Partial decor.

There is another option for coloring the bottle - from the inside. To do this, you can use paint in cans. You will also need a metal baking sheet and a grid. Bottles need to be prepared, then poured inside not a large number of paint and carefully distribute it on all walls, turning the bottle over. To dry, the vessel must be turned upside down and left for a day.

Coloring of bottles inside.

Vase of clothespins and tins

The next vase is suitable for a miniature bouquet delicate flowers. For manufacturing you will need can, a set of clothespins.

Tip: to make the vase neat, it is important to use a small jar, the walls of which can be completely hidden under clothespins.

Clean the jar of dirt, remove the label.
Attach the clothespins tightly to the sides of the jar. For reliability, you can use glue. We recommend purchasing a set of plain wooden clothespins for making a vase - they look as aesthetically pleasing as possible.

Manufacturing process.

The finished vase can be decorated with clippings or stickers. In fact, this is not quite a vase, but rather -. Inside such a stand, you can place a glass cup with a bouquet.

Finished vase.

Vase for artists

You can make the following creative vase in 20 minutes, the main thing is to have all the necessary materials on hand:

any cylindrical container that does not allow water to pass through;
strong glue;
packaging of pencils / felt-tip pens / brushes.

Decor and pencils.

The photo shows that for the manufacture of a vase, the container must be carefully and tightly pasted over with pencils. For beautiful view it is advisable to use a pack of new pencils of the same length. The finished product can be tied with a decorative ribbon.

If you use brushes, the vase will look like this:

Tassel decor.

Using fabric

To create the next vase, we will use a simple set of materials and tools:

a glass container (glass is better, as it looks beautifully from under the areas not covered with fabric);
a small piece of fabric (several harmoniously combined colors can be used, plain canvases can be supplemented with printed ones);
glue;
scissors;
for decoration: twine, buttons, beads, ribbons, lace, etc.

Idea: Instead of buying new fabric, it's better to look for unnecessary pieces among your needlework materials, as well as sort out old, not worn items for a long time. The most cute and gentle will look natural materials: linen, cotton, natural lace.

Necessary materials.

Step by step manufacturing process:

The following photo shows another version of this technique:

burlap decor.

knitted texture

For the next super-simple workshop, you will need an unnecessary knitted item or yarn and knitting needles (if you have knitting skills), as well as a vessel. The bottom line is to make a kind of cover for the container. To do this, you can cut off a sleeve from an unnecessary knitted item if it fits the vessel in diameter. One edge must be carefully tucked up and put on the container - voila, the decor is ready! If you know how to knit, then the original cover can be made in the evening. To avoid seams, it is better to knit on four knitting needles.

Knitted cover for a vase.

By the way, according to the same principle, covers are made for stationery stands, candlesticks, cups and thermoses, and even furniture.

Case variations.

Light bulb mini vase

The following incandescent bulb vase is small in size, so it is suitable for placing a small bouquet or a single color. However, if you make an ensemble of several "vases", you get a very effective picture.

Light bulb vase.

For manufacturing, prepare the following materials and tools:

a few burned out or new light bulbs;
twine or thin braid;
pliers;

Step by step production:

Use a sharp knife to pry off the soldered part (insulation).
Next, you need to remove all the “stuffing” from the light bulb: the stem, electrodes, thread. It is important not to damage the base.
Next, you need to wind the twine around the base and make a small loop - our vase cannot stand, so it will have to be hung.

Manufacturing process.

This product is ready! It remains to do the manipulations with the remaining light bulbs, and make a kit.

Ready product.

An ensemble located on a tree of branches will look very original:

Ensemble of vases made of light bulbs.

Ensemble

Such a composition looks very festive, elegant, gentle and at the same time, it will take quite a bit of time to create it. The main thing is to choose containers that are identical in size and design. It is undesirable to fasten them with glue - so, if necessary, you can disassemble the ensemble. A much more practical and elegant option would be a beautiful satin or rep ribbon in several turns, tied into a bow. With a narrow neck of containers, only one flower can be inserted into each.

An ensemble of containers.

Putty decor

In conclusion, we will tell you how to decorate the vessel with putty and paint. If you have some putty left after the repair, this option is just for you!

What you need:

glass vessel of any shape and size;
putty;
acrylic paints and varnish (paints should be in contrasting shades);
floristic mesh;
sponge, fine-grained sandpaper and a small spatula.

Putty decor.

Step by step production:

Video: do-it-yourself putty vase.

Glass and plastic bottles come in a wide variety of shapes and sizes, making them an excellent material for making vases. Today Dekorin invites you to learn how to make vases from bottles with your own hands using improvised means. 29 photos with step by step instructions are waiting for you!

DIY plastic bottle vase

Plastic bottles are very flexible. They are easy to cut with scissors or a clerical knife, making the vase of plastic bottle can have absolutely any shape. Here are just a few of the ways you can do it yourself:

Cut beautiful patterns on the surface;
Wrap with strips of fabric, ribbons, cords;
Paint with spray or regular paint;
Decorate with branches coffee beans and other natural and materials.

Ideas and step by step instructions for this you will find in the photo below:

Crafts on the table: plastic vases from bottles

Also read:

Do-it-yourself floor vase from plastic bottles

Also read:

How to make a glass bottle vase

Ways to decorate glass bottles for wine, beer and other drinks are no less diverse. Despite the fact that their shape is much more difficult to change (the maximum is to cut off the neck), do-it-yourself vases from glass bottles turn out to be much more elegant and interesting. Vases from tall and narrow glass bottles are often used in "sets", placing 1-3 flowers in each of them.

In the same time homemade vases from cognac, etc. low bottles can be decorated with beads, shells and act as an independent decorative element.

Unlike plastic containers, a glass bottle vase is usually stained from the inside. The paint is simply poured into bottles, where it spreads freely along the walls. Thanks to this, the vases not only get a new color, but also retain the glossy shine of the glass.

An exception is the process of painting with an aerosol. It allows you to evenly apply paint on the surface of the glass, without the formation of smears. Use this option if you want to make your own frosted glass bottle vases or give them an ombre effect.

Using stencils or hand painting skills, you can give a beautiful pattern to a bottle vase.

In addition to painting, you can also:

wrap glass bottle thick thread or twine;
Decorate it with ribbons, lace or fabric;
Apply decoupage.

On the following photos you will see examples of such works.

How to make a vase from a bottle and pieces of fabric: examples with knitwear, lace and felt (the latter can be replaced with felt).

The last 3 photos in this article show bottle vases made with decoupage. As we already wrote in our article, it is recommended to thin the decoupage paper with sandpaper or soak it in water before gluing it to the surface.

Good luck with your creativity!

DIY bottle vases - 29 photos with creative ideas updated: December 26, 2016 by: Margarita Glushko

Decoration plays important role in shaping the general mood in the room. Correct design able to emphasize refined style and create an organic look to the room. Creation harmonious interior in the house is possible without impressive cash spending. One of the most popular home decorating methods is DIY vase decorating. There are many ideas for decorating, in this article we will look at the basic tips for decorating a flower vase.

The vase can be painted black with a golden hue

The newspaper can be used as a decorative element by making flowers out of it.

artificial fruits with yellow leaves perfect for vase decoration

With the help of simple improvised means from an ordinary vase, you can create unique element interior. In order for decoration to bring pleasure and the expected result, it is important to follow your imagination, combining the incongruous and introducing the most unexpected solutions.

Vases in a marine style

What do we associate marine style with? With shells, sand, sea knots, waves, ships.

To implement the easiest way to create a vase in nautical style You will need:

Several vessels of various shapes
Twine or twine
PVA glue
Scissors
Fabric dye (or Easter egg dye)

The vase can be wrapped in beautiful paper, it will look very nice

An example of how to decorate a vase

round vase

Prepare the twine according to the height of the container. Apply glue. Glue the ends of the rope. Make sure the base of the twine is firmly fixed. Then start weaving a braid (see the figure below), not forgetting to coat the surface with glue as the rope is applied. Cover the remaining seam with a layer of rope with glue, securing them vertically to create a contrast with the weave.

Ribbons can be wrapped around a vase, this will give it softness

It doesn’t matter how to decorate a vase, the main thing is that the result is beautiful

You can put beads inside the vase

Vase "Ombre"

For this aesthetic option for decorating a vase with your own hands, you can use a vase of any shape. We recommend resorting to a cylindrical vase. Apply glue and start wrapping it with twine from the base to the very top. Wait until the glue firmly fixes the twine. Then place lower part vase in a container with paint. Saturation and consistency can be chosen independently. Leave the vase to dry. As soon as the vase dries, you can see the fruits of your efforts. A smooth transition of your favorite color on an exquisite vase.

It's time to run for flowers, isn't it?

Also for marine decor shells can be used.

Or do nothing with appearance and instead of flowers, place marine elements in it.

If you have the ability to draw, you can beautifully decorate a vase

You can make covers for a vase, it will look very nice

Dot painting of a vase with your own hands

This type of design is quite complicated in execution, but it gives vent to imagination and allows you to bring ideas to life.

What you need for painting:

Acrylic paints
Brushes, toothpicks, sticks (anything that can be used to apply paint)

Apply convex dots with paint, take a ready-made drawing or style as a basis. Be careful not to touch the already applied layer. The most popular dot painting patterns are ethnic, Indian, tribal patterns. However, the flight of your imagination can take you much further!

Beads are perfect for decorating a vase

An ordinary glass bottle can be wrapped with a bright cloth and get a beautiful vase.

From an ordinary bottle you can make a beautiful vase

Decorating a vase with clothes

Dressing a vase in your clothes sounds ridiculous, but with this method you can quickly and beautifully decorate a vase.

Decor with a sweater. If you have an unnecessary knitted sweater, then it is quite possible to decorate a vase with it. With the help of a piece of sweater and glue, you will get an original decor element. Just imagine what comfort you can create with it on a cold winter evening.
Decoration with socks. Prepare a container small size. Trim the bottom of the sock or gaiter above the heel. To determine the size of the base, use a sheet of A4 paper, circle the size of the base. According to the size of the bottom - cut a patch from the scraps of the sock. Sew the patch for the base with the sock and voila - the vase cover is ready!

Leaves in a vase will perfectly complement the interior

There are a very large number of ways to decorate a vase, choose what is closer to you

Working with floor vases

In interior design, floor models are often used, which give special charm and fit perfectly into any design - be it minimalism, hi-tech or refined classics.

In order for the floor vase to sparkle with new colors, you should create an organic decor.

Cover the container with plain paint, and decorate the neck with twine or twine.

Feelings of organicity and unity with nature can be achieved with the help of cut branches carefully glued to the outer surface. Under the cuts, you can place pieces of paper in warm colors.

Floor vases are perfect for interior decor stones, cereals, artificial floral elements and other types of fillers.

A vase decorated with beads looks very aesthetically pleasing. In general, a creation created by one's own hands will fill the house with special energy!

You can make simple lines and it will look beautiful

Golden scuffs will add elegance to the vase

You can use stickers to decorate the vase

Marble vase

Decor acrylic paint will help to achieve the effect of "marble". For this you need a transparent container. The secret of the decor lies in the fact that the coloring will not be carried out on outer surface, but from the inside.

Rinse the vessel, degrease it.
Prepare several shades of acrylic paints
Do not add water to acrylic! It is necessary to rotate the vessel in horizontal position adding paint drop by drop
After spreading a layer of one shade, add a couple of drops of a darker color to create a marble effect with paint.
Turn the container over and place it on a towel or other cloth to drain excess paint.

Knitted covers for a vase perfectly complement its appearance

Beads can be very beautiful to decorate a vase

Glasses and stones

Using glass pebbles, you can unusually decorate the surface of the vase. To do this, you need a glue gun and PVA. Items can be used different colors to make the decor even more original.

simple vase decor

We offer you to get acquainted with the ideas for decorating flower vases.

With the help of coarse threads you can create a bright and cozy design for any kind of container.

Romance! Fill the vase wine corks and artificial flowers.

For fall chic decor, use pine cones, twine, and fake flowers. Create a mood in the house!

Coloring the can with copper paint. The most unusual vase in the house. Decorating a room can be done with artificial flowers.

Don't throw away broken saucers! Apply a layer of painted plaster and place the pieces in it beautiful tableware. You can also use colored or glossy paper.

A vase with golden scuffs will look expensive

You can decorate a vase from improvised means

Option for decorating a vase with fabric and paints

How to decorate a vase

Below is the table additional materials used for decoration.

Material	Usage Method
	For decoration, you will need a craft type of paper. PVA glue is required for the design. First of all, you need to glue the outside plain paper impregnated with glue. Twist the strips of craft paper into flagella. As soon as the container dries up, start gluing the bundles. The result is a stylish design.
Filling	For filling, you can use cereals, coins, stones, shells, earth, beads. Using the layering method will create a beautiful, unusual contrast.
Notes, newspapers	Smear the cut materials with glue and stick them around the vase. Using a brush, smooth out the formed folds. After drying, fix with varnish.
Sticks, branches	Dry branches prepared in advance can be glued to the surface, creating interesting design. It is also possible to use cut branches different size for a cylindrical vase
	Having chosen the desired pattern and design, start gluing the rhinestones on the base. Use self-adhesive rhinestones, or purchase glue and ordinary rhinestones in advance.
Twine, twine	Fasten the end of the rope to the base of the container using glue. Then the thread is wound around the container. Do not forget to lubricate the vase with glue.
	Apply a layer of colored plaster and place any decorative elements in the plaster. The dried version will exceed all your expectations.

Such a vase will harmoniously complement the decor of the room.

A black vase will look beautiful against a white wall.

Create beauty! Use whatever you see. Buttons, leaves, stones or coins. Let the handmade vase please you and create an unforgettable impression of your interior.

Video: DIY vase decor. Master Class

Usually the motive that prompts us to know how to make a vase with your own hands, is not at all a desire to save or attach unnecessary bottles and cans that have accumulated in large quantities. But the desire to make your interior individual, to bring into it a new element that is ideally suited for shade, texture and shape, without interrupting the mountains of catalogs - this just can move us to new job. Let's see how interesting things in the voiced direction can be done with your own hands.

How to make a vase from a bottle with your own hands

Since the main amount of decor, whether desktop or, is intended for storing fresh flowers that need water, we need to create a container in which this water can be safely stored without spilling. So why invent something new when in any house there is a large amount of source material into which you can pour water. It will be enough just to decorate these jars and bottles accordingly. That is why the first section will be devoted to how to make a vase out of a bottle.

- popular and most cheap way in order to decorate the interior. All the rest involve modeling (ceramics) or working with wood, while plastic or glass are durable, affordable, and easy to process. The only drawback of such a base is its limited size, for example, you can use standard decor techniques in order to how to make a floor vase with your own hands, but for this you need to find really big bottle that would look good. However, for table setting, window sill decoration, coffee table or shelves, small copies will be enough for you.

In the photo you can see some of the most simple examples bottle decorations. Perfect for this task is a special decorative paper with an adhesive bottom layer, which is sold in the departments not only of creativity, but also in construction. It will be enough to cut off a piece of the desired diameter, separate the protective bottom layer and carefully glue it to glass or plastic, making sure that the material lies flat and does not form bubbles or wrinkles. In one photo you can see an example, how to make a paper vase with your own hands with voluminous effect. For this, you can use the usual decorative paper, using PVA for fastening. But the main decor is different - small figures are cut out of the same paper, such as butterflies and flowers, and fixed with hot glue at one point on the surface of the vase. However, additional decor there may be ribbons tied around the neck of the bottle, laces, buttons, and so on. It is very fashionable today to do not only decoration with woolen threads, but also to knit whole bottle cases. Simple Ways, such as painting in one color, also look very impressive, but work best when several identical vases are used in a single composition various shapes but one color.

You can see an example of coloring a glass baby food bottle in a small master class, which is located above. The paint should be applied not with a brush, but with a kitchen sponge so that its layer is not too thick, which can lead to cracking. Paste the pattern template on the surface in advance using double-sided tape or special paper. adhesive tape(painting tape), and remove only after the paint has dried well. Previously, before painting, try to degrease the surface with any alcohol-containing liquid. For decor, we need a special stained glass outline, a tube with which you can buy in any department children's creativity. By the way, it is also advisable to buy special paint for stained glass crafts. The wonderful result will be complemented by a bright thread matching the color of the main paint, which wraps around the neck and is fixed with glue.

The popularity of the eco-theme dictates certain trends for home decor. Moreover, vases can be not only (you know, such small pumpkins in the shape of a guitar), but also bottles ennobled in the appropriate theme. Twisted paper flagella, fabric cuts, twigs, stones become decor. An easy way is to take a bamboo mat and wrap it around the bottle, fixing it with glue and cutting off the excess length.

When we then perfect way decoration - a layer of hemp rope with or without decoration, which is applied to glass surface jars or bottles.

How to make a vase with your own hands video

Balloons, as lovers of children's crafts know, are indispensable for creating voluminous papier-mâché works. They can also be used for a small master class, how to make a vase with your own hands, video which you can find on the web.

base, that is balloon, is filled with exactly the size that you would like to receive your future vase. You can also alternatively use a rubber or plastic ball, or even a plastic bowl wrapped in cling film (as in our photo), but the ball has the advantage that you can vary the size. Next, you must lay out on the surface of the thread, pre-moistened well in adhesive composition, you can even pierce a bottle with stationery glue and pull the thread through it. After the glue dries, you can release the air from the balloon and get a new decorative element.

Today, only lazy people do not improve the design of their home. Fashion trends allow satisfying the most sophisticated tastes of demanding consumers. At the same time, the demand for decoration remained at all times. interior design high floor vases. However, their affordability does not always coincide with the desired appearance. Like any other thing, a floor vase can be made by hand. Such a beauty will be in the desired shape and in the right color scheme, and much cheaper than their store counterparts.
Materials for work:
Glass jar with a capacity of 3 liters - 2 pcs.;
Tea saucer - 1 pc.;
Plastic container from preserves - 1 pc.;
Silicone sealant - 1 bottle;
PVA glue liquid (construction) - 1 liter;
Building alabaster - 4 tablespoons;
Potato starch - 100 gr.;
Egg lattices - 4 pcs.;
Vegetable oil - 1 tbsp;
Vaseline - 1 tbsp;
Three-layer napkins - 2 pcs.;
Plasticine - 1 box;
Old tube of PVA glue with a narrow nose - 1 pc.;
Glue "liquid nails", paints white and "gold", blush, eye shadow, face powder, brush, colorless acrylic varnish, water.

Stages of work:
The first stage: we form the basis.
We turn one jar upside down and glue " liquid nails» a tea saucer turned upside down towards him.

Glue the bottom of the second can to the bottom of the same can.

Cut off the bottom of the canning container. We glue the inverted container to the neck of the second jar.

Let the base dry for 1 day.

The second stage: we give the vase the outline of the vessel.
Finely chop the egg racks.

Fill with water so that the entire torn mass is immersed in it. We leave for the night.

We wring out the soaked grids.

Tear off large pieces. Fill the whole mass with PVA glue.

Thoroughly, until a homogeneous gruel is obtained, mix the soaked grates.

We fill the space between the neck of the jar and the container with the egg mass.

Over the entire surface of the cans we impose thin layer egg mass.

We dry the base for 2 days.

We paint white.

The third stage: we apply a three-dimensional drawing.
Print your favorite stencil.

We make cuts along the contours, cut out the necessary points.

We place the drawing on the vessel in a checkerboard pattern in a straight and inverted form (2 times above, 2 times below; top and bottom facing each other).

Draw voids and cuts with a pencil.

Squeeze silicone sealant into an empty PVA tube.

We put a sharp nose on the tube and squeeze the sealant along the contour of the picture.

If necessary, make adjustments with a toothpick.

Dry the sealant for 1 day.

With superficial movements with a large brush, we apply blush toning on the drawing.

Fourth step: do silicone mold.
Mix potato starch and silicone sealant.

Thoroughly knead until a pasty mass is obtained.

We coat the surface of the figure blank (in this case, a magnet) with Vaseline.

Press the pastry into the flattened dough with the right side down.

Carefully prying with a knife, we take out the workpiece.

Fifth stage: casting the figures.
Lubricate the inside of the silicone mold vegetable oil(pour it in, then turn the mold over and pour out the oil).

Pour a tablespoon of alabaster (or gypsum) into the container.

Add a spoonful of water there, mix. If the solution becomes thick, add water.

We fill the silicone mold with alabaster solution.

We leave the solution to harden (you can check the readiness by pressing the nail on the figure - the trace should not remain on the surface). We pry the figure with a knife and take it out of the mold.