What is a water aerator and what is it for? Equipment selection criteria. Material for the manufacture of the aerator

To reduce your daily water consumption and significantly save on utility bills, an ergonomic faucet nozzle is designed to save water.

It is represented by a special aerator, which is easily mounted on any type of mixer and is designed to limit water pressure.

The divider contributes to the rapid saturation of the liquid with oxygen, the weathering of chloride compounds and the reduction of water consumption.

Structurally functional nozzle on the mixer to save water consists of the following parts:

• boards - water pressure limiter;
• mesh filter for aeration of consumed water;
• a spring element for adjusting the fluid flow, it is used in devices with similar functionality;
• cases - external and internal, for reliable assembly and fixation of the main elements of the aerator;
• screw fasteners for connecting parts when assembling the structure;
• rubber seal for hermetic connection of the nozzle with the spout of the mixer.

The device for saving water allows you to convert the chaotic pressure of the liquid when mixed with the air mass into a uniform and powerful flow.

The faucet nozzle works according to following principle:

• the liquid passes through the cover plate and creates an increased working pressure, which is regulated by special inlets on the strainer;
• the vacuum formed under the filter is filled with air mass passed through the side openings of the device;
• the water flow is filled with air bubbles and supplied to the consumer through the spout of the mixer.

In this case, a significant savings in water consumption is achieved in the ratio of 1 to 3 (for 1 part of liquid 3 parts of air).

Benefits of using aerator nozzles

Thanks to its ergonomic design and ease of installation, the water saving aerator has a number of significant advantages:

• The power and volume of the water flow remain at the same level, while saving the resource reaches 75%.
• The noise level is reduced when a mixture of water and air is supplied to the point of consumption.
• The design of the nozzle is equipped with a mesh filter, which contributes to effective cleaning water.
• Maximum saturation of the water flow with air reduces the likelihood of water hammer in the system.
• The universal design and small dimensions make it possible to use the aerator on the faucet for almost any type of faucet.
• Installation of the device does not require technical skills and the use of special tools. All that is required is to change the standard nozzle to an aerator to save water.
• When installing savers on kitchen taps or faucets in the bathroom, the savings in fluid consumption will increase many times over.
• For the manufacture of the device, high-quality and durable materials resistant to corrosion, deformation and mechanical damage.

Water saver selection options

In order to correctly select the right faucet aerator to save water, it is recommended to consider the following:

• saver type;
• material of manufacture;
• additional characteristics.

Main types of devices

Manufacturers offer wide range of mixer taps for showers, bathtubs, sinks or kitchen sinks. Devices are divided into two categories:

• Fixed nozzle (no adjustment). Almost all modern mixers are equipped with a similar device. Predetermined mode of operation, easy installation and low cost – distinctive characteristics fixed aerator.
• Movable nozzle (adjustable). A device of this type automatically determines the intensity of the water pressure and the method of supplying liquid at the point of consumption. It is reliable, economical and practical.

To adjust the power of the water pressure, the aerators are equipped with sealing rings and springs.

Water supply in an adjustable nozzle is carried out:

• single stream;
• many separate jets (showers).

You can regulate the water flow by turning the spout, translational movements from side to side, a special switch installed on the device.

Many models of aerators are additionally equipped with temperature sensors and LED backlight.

Material selection

The shower or sink aerator is made of reliable and safe materials:

• Plastic. Plastic nozzles are practical and durable, resistant to decay and destruction, but susceptible to salts. chemical elements that are contained in the water.
• Metal. For the manufacture of aerators, steel and bronze alloys are used. Steel products are short-lived, and also susceptible to rust and deformation. Brass and bronze savers are resistant to aggressive substances and high temperatures.
• Ceramics. The material is used for the manufacture of internal structural elements. It is resistant to overheating, deformation and corrosion, so it ensures a long service life of the finished product.

additional characteristics

Thread type compatibility on aerator and faucet

Faucets various types are equipped with a thread inside (mother) and outside (father) of the structure. For equipment with an internal thread type, nozzles with an outside thread are selected, and vice versa.

Device diameter

The nozzle must fully fit the diameter of the faucet to ensure a tight connection and prevent possible leakage of liquid. According to the type of thread, taps come in two sizes - 2.2 and 2.4 cm.

Water flow (l/min.)

The key characteristic when choosing a device, which is indicated by the manufacturer on the packaging.

Standard throughput most taps is no more than 12 liters per minute. To check, a stopwatch, a 1 liter jar and a measuring container are used. We divide the result by 60 seconds - we get the throughput of a particular mixer.

With a patency of the aerator at 3.5 liters / min. the saving is 75%, at 4 l/min. - reaches 58%, and at 5.5 l / min. - does not exceed 49%.

It is also important to consider the individual cost water resource for various needs. For the kitchen, models of nozzles with a throughput of up to 5 liters per minute are suitable. For the bathroom, you can choose devices with parameters from 1.6 to 3.5 liters per minute. For washbasins - no more than 1.8 liters per minute.

The water-saving nozzle allows for a more rational use of the resource for daily consumption for household and food needs. For the correct choice of the device, it is necessary to take into account the main specifications, as well as individual water needs, to start saving finances when paying for utilities.

An aerator is one of the key components of any mixer, which significantly affects the consumer properties of the product as a whole. Nowadays, aerators are installed in almost all faucets for bathtubs, sinks, kitchen sink or bidet.

Why do you need an aerator?

The aerator is a special nozzle on the spout of the mixer, designed to normalize the water jet. About how it works and how the aeration of the flow occurs (saturation of the water jet with air bubbles) we wrote earlier in our blog.

Aerated water splashes much less when it hits objects, so washing or washing dishes becomes more comfortable. The aerator retains large particles of mechanical impurities (but do not be confused, the aerator is not a filter).
In addition, the aerator contributes to the weathering of chlorine compounds.
And finally, the aerator saves water. By cutting the flow into many tiny ones and mixing with air, the volume of the water jet increases, which means that the water consumption is reduced.

So, the aerator:

• Forms a smooth, soft to the touch jet of the required diameter;
• Eliminates splatter and spatter;
• Helps save water by reducing its consumption;
• Brings the consumer characteristics of the faucet in line with local plumbing standards and regulations.

Types of created water flow

	aerated stream The aerator saturates the water jet with air, making it voluminous, soft to the touch, without splashing. Such aerators are usually used in mixers for home use installed in apartments.
	laminar flow Smooth, crystal clear water jet without splashing. Used when high flow is required, ideal for healthcare facilities.
	Spray With a minimum flow rate, the diffuser creates a lot of miniature jets, the volumetric flow ensures a comfortable grip of the hands when washing. Recommended for local use common use (public toilets etc.).

Types of aerators

There are several types of aerators - with plastic and metal meshes.
Aerators with metal mesh have a significant advantage - this is their low cost, otherwise they lose to polymer ones.

VARION mixers use only polymer aerators from Neoperl (Germany).

Advantages of NEOPERL aerators

1. Provide a smooth, well-aerated flow;
2. Reliable and durable, provide comfortable use during the entire period of operation;
3. Water saving is from 5 to 45% depending on the model;
4. Work silently, ideal for installation in any premises;
5. High quality polymer materials hinders education limescale, the water jet always remains even;
6. The design of internal elements prevents clogging of the aerator;
7. Produced in Germany, which is a guarantee of quality and high consumer properties of products.

Thanks to resistance to various kinds dirt, it is not necessary to clean the aerator. It is enough to remove it and rinse under running water. Dirt, sand and rust particles are easily washed out, while the water pressure is restored, and the water jet returns to its original shape.

Currently, there is a huge variety of models of aerators for various applications.

Special aerators

Rotary mesh aerators
The swivel mesh makes it possible to divert the water jet from the edge of the sink (or sink), or direct it to the side, which is very useful, for example, when washing large-sized dishes.

Saving aerators
Saving aerator PCA SPRAY NEOPERL saves water up to 45%. At the same time, the reduction in water consumption occurs without a visible decrease in the intensity of the jet and does not affect the quality and comfort of washing. Externally, the jet does not differ from the usual one, and the washing process is as effective as when using a conventional aerator. The saving aerator is installed in portion-pressure and optoelectronic (for public institutions) mixers VARION for a sink.

A device such as an aerator for saving water is a nozzle on a mixer, which, according to manufacturers, will help to significantly reduce consumption and save family budget. Opinions about effectiveness this device divided. One side advocates for awarding the aerator the title of device " must have”, Opponents exhort the complete uselessness of this device in terms of reducing water consumption. Why did they even come up with a nozzle aerator on the faucet? The meaning of this device is to pass a jet of water through a mesh or slit-like cartridge, during which the water stream breaks into drops, mixing with air. The water becomes softer and the jet more uniform.

Advantages and disadvantages

Is an aerator really the same device for saving tap water that can reduce water consumption by as much as 80 percent, or is it just another publicity stunt by cunning marketers? So that you can decide for yourself with the answer whether this purchase is necessary, let's look at the essence of this device, which fits at the end of the mixer spout. Having an aerator nozzle to save water has its merits. There are also disadvantages, but in order to really understand whether such an acquisition is advisable, we will tell you about everything in order.

The advantages of the device include:

• a wide price range - on the market you can find models worth one and a half hundred rubles and more expensive options, the price of which exceeds one and a half thousand. The latter may include several nozzles in the package;
• the aerator for saving water has the function of reducing the pressure of the water, which results in less noise from the water;
• This faucet attachment is objectively easy to install. Even if you are an absolute ignoramus in terms of plumbing installation, you can do it without effort - the scheme is understandable at the level of intuition.

The main disadvantage of a water-saving nozzle on a faucet is a short service life. The aerator is sensitive to the quality of the water coming through the pipes, and it is usually far from perfect. The filters inside the structure are the first to suffer and the nozzle fails. The aerator from the budget line is subject to replacement after an average of 6 months. If you have purchased more than quality device, the aeration system can last up to three years. Unfortunately, this period is the maximum - after the device must be changed to a new one.

The second drawback is the increase in waiting time in the process of filling any container - from the kettle to the bath. The same goes for showering. Get ready for the fact that if earlier you collected water for 2 minutes, now it will take 3.

The third minus is that the divider may not be suitable for your mixer. If the water-saving nozzle was purchased without due attention or under the influence of an impulse, you will have to buy an adapter - with an external type of thread, or an internal one, depending on the faucet in your house on which you plan to install.

As you might expect, the pros and cons balance each other out. Here the choice will be based solely on your priorities.

Aerators

Principle of operation

To appreciate the advantages of the device, you need to understand the essence of its purpose and principle of operation. Without this, any claim will be considered unfounded. The principle of operation of the device on a faucet to save water is based on the mixing of a water jet with air as it passes through the device:

• water pressure is formed at the narrowest point. The dilator in the form of a membrane contributes to the distribution of pressure over the entire area of ​​​​the device. All holes are activated - a high pressure area is obtained in the upper part of the membrane. On the other hand, due to the peculiarities of the internal design, a vacuum effect is obtained;
• under the influence of the pressure difference, air enters the aerator through the side holes. The water jet is enriched with air bubbles. At the same time, up to 70 percent of the volume of water is displaced from the water flow;
• aeration promotes a ratio inside the jet at the exit of air to water of 2:1. In other words, the jet is 2/3 air. This is what saving water is all about.

The device is so simple in design and operation that it can be installed and cleaned in case of clogging with deposits due to poor quality water with your own hands will not be difficult.

The principle of operation of the aerator

Types of aerators to save water

Sellers vying with each other offer to purchase water saving products. Here and simple devices and complex design solutions. What are the features of water aerators, depending on the type? A variety of models, one way or another, comes down to the following list:

• aerators vacuum type- vacuum valve, due to its design, contributes to a stronger water pressure when the jet is ejected. This feature allows you to increase water saving by 4 times;
• adjustable, they are also rotary. Change the power of the water flow due to its dissection. They work in two modes, forming a spray or jet. Such a scheme is very convenient when you need to quickly draw water;
• antipodes of rotary devices - unregulated. Here, a jet of water pours out in a given mode, which is no longer possible to influence;
• illuminated aerators - built-in LEDs, when water is supplied, color the jet in different colors subject to temperature. Such models operate in a temperature range not exceeding 60 ° C. The secret of “light representation” lies in a small microturbine in conjunction with an electric generator, so such an “device” does not need an additional power source. Someone sees an exclusively decorative function in the backlight, for others this indicator allows you to determine the change in water temperature - for example, mothers when bathing a baby;
• decorative aerators - can be made in various stylized forms and break the water jet, turning it into beautiful spirals or a grid.

backlit

Vacuum

Adjustable

Another type of means of aerating water and saving it is homemade. The mesh gasket can be made independently from durable plastic, having previously drawn a hole pattern. Such a gasket is installed in the nozzle, turning it into an effective aerator.

Production material

The aerating nozzle at the end of the faucet spout can be made of several types of material. Most often this stainless steel. Experts recommend giving preference to products that have a silicone coating. Such products are more accessible in care and cleaning takes less time.

A water saving device can be:

• plastic - the most cheap option. The downside is high sensitivity to water quality and a short service life. Impurities will quickly disable such an aerator;
• metal - both steel and alloys containing bronze are taken as the basis. Bronze and brass guarantee a long service life of the nozzle, as they are less susceptible to corrosion, but their steel counterparts, on the contrary, boast long-term operation can't;
• ceramic - the case can be from anything, but internal details will be ceramic.

Metal

Plastic

The practice of application testifies to the benefit of brass, bronze and ceramic water savers as the most reliable and efficient. quality material will be less susceptible to the effects of corrosive processes, which will significantly extend the life of the fixture.

What should be the cost

To clearly demonstrate the effectiveness of the aerator as a means of saving water, consider specific example. Opening the tap to the stop in the absence of this device on the mixer, you will use up 12 liters of water in 1 minute. Now we put an aerator on the faucet spout. Consumption per minute of time is reduced by 3 times. At the same time, the jet does not filter thinly, but a high-quality intense pressure of water is observed. In addition, due to the design features of the aerator, the crane receives additional features adjusting the flow rate and changing its direction in different directions.

The essence of savings is not to reduce the amount of pouring water, but to increase the time during which this volume is poured out. Let's say you're washing a plate. The water is open both during lathering, when in fact the jet is not involved, and when washing off the detergent. Due to the aerator, the amount of water not used in the process is reduced. It is on this principle that the declared savings are based.

Service Rules

Caring for an aerator is quite simple. However, remember to use detergents and it is impossible to keep the device in water for a long time categorically. The surface of the fixture can be easily cleaned with a damp cloth:

• to install the nozzle, the tension must remain moderate. This is enough to fix the device on the spout. Wherein perfect option when the crane has not yet exhausted its service life;
• despite the reliability of fixation, it is not recommended to make the water pressure excessive. Overloading can shorten the service life;
• to rinse the structure, just unscrew the aerator, carefully remove the filters and rinse them. If the mesh is clogged, use a needle or the tip of a toothpick;
• if necessary, replace the silicone gasket, which ensures tightness;
• assemble the aerator and return the device back to the faucet spout. Test by opening the tap at full power, there should be no gaps left.

If the aerator is tight and you decide to use pliers, try to protect the surface from scratches.

Appreciating everything possible options equipment, operating and maintenance requirements, you can make an informed decision about purchasing an economical water aerator. To experience the maximum savings, it is recommended to equip all existing mixers with it.

Video

The shower aerator is a small device that is attached to the "nose" of the faucet. What is this detail for?

Thanks to the aerator, it is possible to reduce water consumption. For example, when using standard plumbing fixtures moisture consumption can reach 15 liters. And if you use an aerator, you can save 8-9 liters.

Advantages and disadvantages

The main effective plus of this nozzle is moisture saving.

But there are many other advantages:

Possibility to filter water.

This device will not be able to clean it of all impurities, but it is able to carry out a weak cleaning. Therefore, the aerator can be used as a simple and cheap filter.

There is only one drawback to the aerator: fragility. This is especially noticeable on old mixers, the service life of which is a year or two. In this case, you will have to change the device to a new one after 6 months.

Principle of operation

All aerators have three main components: rubber gasket, case, special filters.

The body is made from different materials:

1. Plastic. The easiest and most affordable. But plastic products will not last long. In this case, the model may not work well.
2. Metal. Stronger than plastic, but also not popular. metal models corrode, and therefore will not last long.
3. Brass. It is not very cheap, but it works well and lasts a long time.

The principle of operation is simple.

The device has several fine meshes through which water seeps, which then mixes with oxygen.

At the outlet, the jet becomes soft, light, and may have foam.

The pressure in the tap does not change, since the air in the aerator is constantly mixed.

Other features:

1. Jet quality adjustment. Without an aerator, water can splash to the sides, go unevenly, weakly or strongly. Thus, some of the water will simply "go into the void", that is, simply not be used. The aerator makes the jet streamlined and smooth.
2. Removes particles of chlorine, saturates the jet with oxygen. Thanks to this nozzle, the water becomes healthier and even tastier. disappears bad smell chemicals, which owners of city apartments often complain about.
3. Cleans liquid from large particles and impurities.

Read an article about the use of aerators in sewers here.

How to clean and change

The aerator is a short-lived device, so you should learn how to replace it correctly.

Work is carried out as follows:

1. To remove the device, you need to rotate it clockwise with pliers and a wrench. The gasket should fall off. If this does not happen, you should definitely remove this part.
2. You need to press the jet outlet with your finger, and then remove the structure with the grids.
3. The cylinder with grids is disassembled in parts, then washed with water. It is necessary to clean the product with a thin needle or a toothpick.
4. After thorough cleaning of all parts, the system can be assembled and put back. A gasket must be placed on the nozzle. It is better to screw the whole system together with it.

You don't need to twist the aerator too much. Do it with your hands. But if a leak is found, you will have to use pliers.

Replacing the nozzle is also not difficult. In this case, you should first unscrew the old one, and then install new design. You can clean and change aerators at any time.

Read an informative article about aerators for a septic tank here.

After reading this article, you will learn everything about aerators for water from a well.

Many people love this device.

Two advantages are important: good water savings and gentle jet flow. Now the water does not splash, but flows smoothly and carefully.

The economy cannot but rejoice. This is very noticeable in water bills.

On the other hand, not everyone likes to wash dishes for a long time or draw water into buckets. But it will be possible to save some of the water.

If there are children in the family, they will be delighted with the new improved backlit models. The body of this product is made of chrome-plated brass.

The LED backlight of the device works with the help of a turbine that rotates, so extra power sources are not needed. The color of the jet depends on the temperature. For example, if it is more than 39 degrees, the water will change to red.

Shower aerators: device and principle of operation, practical confirmation of efficiency and water saving
The article describes the device and principle of operation of shower aerators. Using shower heads to conserve water. Shower head with water aerator.

Today, almost everyone has water meters, so everyone is interested in saving it. One of these tools is an aerator, which is installed on the mixer. This is a special nozzle that serves to limit the flow of water. According to the manufacturers of this device, the pressure in this case remains comfortable, and the water consumption is reduced by two to three times. The real effect of this device can be found in the reviews of the faucet aerator to save water.

• less than a month
• several months
• half a year
• more than one year
• over three years
• over five years

• Recommend
• I do not recommend
• Difficult to answer

Aerator to save water

impractical

Doesn't save at all.

I use!

Aerator ANGO - advertised product, poor quality

I apparently was not so lucky when buying an aerator to save water, since my review is negative. I decided to purchase an advertised ANGO aerator, they promised that it could save up to 60% of water. Trusting the manufacturer and reading positive feedback on the Internet, I decided to buy myself 2 aerators at once, in the sink and sink.

I use on this moment 3 months and nothing. As it wound up 3 cubes, so much is obtained per month to this day. So, at the expense of savings, I can argue that nothing here reminds of it. In addition, it is quite difficult to purchase an aerator, I had to specifically look for it in online stores and wait for the parcel, since nothing like this is sold in our stores. And the worst thing is that it's all for nothing. My expectations were not justified, the money wasted, there is no water saving, I do not recommend it.

I bought an aerator from Tescoma, in principle, not bad.

Once on the Internet I came across an article about how, with the help of an aerator, for a mixer, you can save on water. I decided to buy it for myself, found an aerator in the Tescoma store, and bought it. This device is screwed onto the mixer, it is small in size. I installed it in the kitchen. Visually, I did not find a difference in the volumes of water supplied, but I can say from the meters that savings are taking place. The nozzle can rotate in a circle, while water is not splashed.

The main function of the aerator is to mix water with air, making it softer. big savings I didn’t see it, but 20-30% still happens. Installation is simple, I did everything myself, even a child can handle it without much difficulty. I bought four hundred rubles, I consider the thing useful and necessary for everyone who has water meters installed. I will recommend, a necessary thing!

Quality aerator from Tescoma

Ferro aerator helps save water

Aerator from the manufacturer Ferro, bought a few months ago. The thing is that meters are installed at home and, accordingly, you constantly think about how to save water. When I saw a faucet aerator in the store, I decided to buy it right there. The cost is small, only 200 rubles.

It works according to the following principle: the water jet is filled with air, while it becomes denser, due to the installed divider insert.
Threaded connection, it is standard for taps and mixers, the grooves are mounted with a 22 key. The mesh lining is made of rubber. The flow of water from 100% becomes 50%, thanks to the splitter, excellent water savings are obtained. For me, this divider has now become an integral part of the faucet, and even then it paid for itself in the first month of use. I recommend that it is much easier to monitor water and keep records of water consumption.

Water Saving Faucet Aerator
Saving resources is not only fashionable, but also profitable. Reviews about the aerator for the faucet to save water will allow you to evaluate the advantages and disadvantages of this device.

Aerator for saving water: description, specifications, reviews. Faucet aerator nozzle

To save money on utility bills and to reduce water consumption, today they began to produce special devices called aerators. These devices are a nozzle that should be located on the mixer. Additional feature This unit is characterized by the fact that it fills the water jet with air, this makes the flow more pleasant and soft, and also helps to free the water from chlorine.

Aerator characteristics

The aerator for saving water consists of the following components:

• cover fee,
• mesh plate,
• spring,
• outer and inner case,
• screw.

The first element is used to restrict the flow of water. As for the plate, it saturates the flow with oxygen. The spring is necessary to adjust the flow rate and is available only in those devices that are supplemented with this functionality. The aerator for saving water has two housings at once, which are necessary to accommodate the internal elements. Separate nodes in the structure are connected with a screw. In order to seal the connection of devices with a mixer, a rubber gasket is provided.

Description of the aerator

The water saving aerator works on the principle of pressure difference. When liquid passes through the cover plate, there is high pressure, which is corrected by the holes located on the mesh plate. A vacuum is formed at the bottom of the grid, it is filled with air entering through side walls aerator. Water is mixed with oxygen, and a mixture of water and air comes out of the tap. The aerator for saving water provides a reduction in consumption due to the formation of the described mixture, which is obtained in a ratio of 1 to 3.

Reviews about the choice

According to users, to select an aerator, you need to know several parameters, among them:

• device type,
• additional characteristics,
• material for manufacturing.

It is now possible to purchase aerators that can be installed in a sink or bath faucet. The device may be stationary. Such a device is complemented by all modern mixers. It works in the set mode. You will have to pay quite a bit for such a unit, and its average cost varies from 250 to 350 rubles.

The aerator to save water, according to users, can also be adjustable, that is, movable. Devices of this type allow you to choose the desired pressure and method of supply. Consumers emphasize that they will have to pay a little more for such equipment - from 350 to 500 rubles. You can regulate the water pressure due to the sealing ring, which is sometimes replaced by a spring. If the flow of water has become too intense, then the spring is deformed, blocking the flow of water.

Feedback on water supply methods and additional functionality

A faucet aerator, as buyers emphasize, should have two ways of supplying water, which comes in the form of a shower or a single jet. Depending on which model you have in front of you, the economy can be rotary, have a special switch or move back and forth.

Buyers like that the faucet aerator can have a special temperature sensor, sometimes the device is completely supplemented with built-in LEDs. Depending on what the supply temperature is, the appliance will change color. This function is purely aesthetic in nature, but negatively affects the cost.

The faucet aerator can be equipped with a switch-off function after a certain amount of water has been supplied. According to buyers, this solution is very convenient for country houses where water is supplied from a well or a personal well.

Additional features: material

After reviewing the range of modern aerators, you can understand that they can be made from different materials, among them:

In the first case, we are talking about devices that have less high durability, because the material is subject to the aggressive effects of substances that are contained in water. But you will have to pay a minimum price for such a device.

The aerator nozzle on the faucet can be made of metal. For this, its different variations are used, it can be an alloy of bronze or ordinary steel. Such savers are susceptible to corrosion, which means they will not last long. Aerators made of bronze or brass will be more resistant to aggressive substances. They will last quite a while.

The faucet aerator can be made of ceramic to save water. Only the internal components of the device are made of this material, while the body is most often made of plastic or metal. Will please long term operation of the saver, which is made of bronze or brass. As an alternative solution, you can choose a device with internal content from ceramics.

Extra options

When choosing an aerator, you should consider additional aspects, among them:

• the location of the thread on the tap,
• faucet diameter,
• water flow.

Aerator to save water, reviews of which should help you make right choice and presented in the article, should be selected taking into account the thread on the mixer. There are taps that have external or internal threads. For the latter option, an aerator with external thread. The diameter of the economizer must be equal to the diameter of the valve. Otherwise, the tightness of the connection will not be achieved. This will cause water to leak and render the fixture useless.

An adjustable aerator to save water must be selected taking into account the volume of the flow. This characteristic is one of the most important for such devices. You can find out about it by looking at the packaging of the equipment. If the permeability is 3 liters per minute, then this can help save up to 70%. With an increase in throughput up to 4 liters, the savings are reduced to 60%. If you purchase an aerator, the water flow of which is 5 liters per minute, then the savings will be 50%.

Additional Performance Feedback

The water saver appeared on the market quite recently, but has already become popular. As practice shows, only 60% of consumers confirm the fact of saving water. Among the reviews you can find positive and negative ratings. However, buyers claim that the stainless steel at the heart of such devices has high quality and plastic has excellent molding.

The angle of inclination allows you to conveniently adjust the direction of flow. This is especially convenient for operating the aerator in the kitchen. According to buyers, the cost of the saver justifies itself in a few months. You can also save money on filter replacements. The unit is practical, it can be used in bathrooms and in the kitchen. You can install it yourself, according to home masters.

Conclusion

An aerator to save water seems economical to some, for others it acts as conventional nozzle for the crane, which acts as a divider. However, the device absolutely does not allow the formation of scale and water stone. Before and after the installation of such a device, consumers feel the difference. At the exit, it is possible to get water that does not have small inclusions and is safe.

Aerator to save water: description, specifications, reviews
The aerator for saving water has two housings at once, which are necessary to accommodate the internal elements. Separate nodes in the structure are connected with a screw. In order to seal the connection of devices with a mixer, a rubber gasket is provided.

Aerator - an easy way to save water

The aerator is an innovative ergonomic device that is attached to the faucet faucet. The principle of operation of the water economizer is that it limits the flow of water while maintaining the intensity of the jet.

Consider a small but good example. On average, the capacity of the tap is 15 liters of water per minute. Installing an aerator allows you to achieve real savings in 6-7 liters. That is, to reduce water consumption by more than 50%. This is the main, but not the only reason to buy a faucet aerator. You can calculate the exact amount of water saved for your family here.

1. Water saver design

A small aerator device includes a sealed housing, a rubber or silicone gasket, and a filtration system. Depending on how much money you are willing to spend on buying an aerator, you can choose from three options:

Budget. The body of the budget water saver is made of heat-resistant plastic. The price of an aerator for a mixer in this design is relatively low, but its service life should not be exaggerated.

Optimal. The case of these economizer models is made of pressed metal. It also does not differ in super reliability, as it is subject to corrosion, but it will last longer than plastic.

Luxury. The deluxe aerator body is made of brass. If you fork out for a brass water saver, be sure that you will solve the problem of paying for water supply once and for all.

When choosing an aerator, you should also pay attention to how its fastening is arranged. Does it have an internal or external thread. Check that the method of attachment of the device matches the thread on the outlet of your faucet.

2. Working principle

3. Other economizer functions

In addition to its main purpose - the elimination of excess water consumption, the nozzle on the faucet is designed to improve the quality of the water jet, organizing and regulating its flow. If the water flowing from your faucet splashes right and left, and the jet itself is not an evenly tapering stream, do not rush to change the faucet: the price of a faucet aerator is much lower than buying new plumbing. In addition, you can install a water saver yourself, while installing a new faucet will require the help of a qualified specialist. The nozzle on the tap, due to the saturation of water with active oxygen, contributes to the effective weathering of chlorine, and thus the water can be used for cooking without settling. The aerator's filter system also cleans the water of foreign bodies such as scale. However, like any technical device, the water economizer has both disadvantages and advantages.

4. Pros of using an aerator

Low noise level. Limiting the volume of incoming water naturally leads to a decrease in the noise level during the operation of the mixer.

Ease of maintenance. The simple design of the aerator allows even a child to effectively deal with all the nuances of his device and the features of the functioning of the device. For periodic maintenance of the aerator, it is enough to remove the device from the tap, unwind it, rinse the filters.

5. Cons of using an aerator

As such, the water economizer has no disadvantages. But there is a nuance that still keeps some homeowners from buying a faucet aerator. We are talking about the dependence of the life of the aerator on the quality of the incoming water and the state of the water supply system. Reviews of aerators indicate that if the system is worn out, that is, the pipes have not been changed for more than 10 years, you will have to change the water economizer every six months or a year. The actual service life of a particular device will depend on the condition of the water supply and on how often it is cleaned.

6. Operational maintenance of the device

Works on how to maintain an aerator to save water are intuitive for everyone. After installing the device, turn on the faucet at full power and check for leaks. Otherwise, press the device until the leak is completely eliminated. In the same way, the device is replaced.

And that is not all!

If you appreciate unusual items interior design or just want to impress your guests, you will surely love the backlit water saver. Its body is made of brass and plated with chrome, and its design is complemented by an integrated micro turbine, current generator, temperature sensor and LEDs. Therefore, the illuminated aerator will cost you a little more than usual. However, reviews of illuminated aerators are always full positive emotions, as the luxurious illumination of the nozzle delights not only children, but also adults. The aerator's LED lighting does not require external sources power supply. It works by the current generated by the built-in micro turbine and turns on automatically when the tap is opened. The backlight color is predetermined by the temperature of the incoming water and is set by the built-in thermostat. If the water temperature is less than 30 degrees, the backlight color will be green. The temperature is 30-40 degrees blue color. Temperature 40-60 degrees - red. In addition to aesthetic value, illuminated aerators also have utilitarian value. They are very convenient when bathing children, when it is necessary to strictly monitor the temperature of the water.

To order a water-saving aerator, fill out the form below and the operator will contact you shortly to confirm the order. Payment for the order occurs after receiving the goods.

An aerator is an easy way to save water
The aerator is an innovative ergonomic device that is attached to the faucet faucet. The principle of operation of the water economizer is

A faucet aerator is a small device that is attached to the “nose” of a faucet and serves to restrict the flow of water without any noticeable decrease in the intensity of the jet. When using plumbing fixtures without aerators, the water flow can reach a shocking figure - 15 liters per minute. With them, you will have no more than 6-7 liters per minute. But the advantages of these "nozzles" do not end there.

The design and principle of operation of the aerator

It looks like a jet of water without aerator

And so - with an aerator

You may find useful material on how a water faucet works and how it works:.

Advantages and disadvantages of such a nozzle

The main benefits of using an aerator include:

• low price. The nozzle will cost you 2-10 dollars (depending on the design features);
• reduction of noise level during the operation of plumbing devices. Water supplied together with air does not make noise;
• ease of maintenance. The elementary design allows even a housewife to deal with the intricacies of the device and the operation of the nozzle;
• performs a simple function.

There is only one drawback - the fragility of the device. If your house has old pipes, you will have to change the aerators on the taps every six months to a year.

The aerator meshes can be cleaned with a pin or needle

How is the aerator cleaned and replaced?

If it is necessary to clean the aerator (and there will be such a need), work should be carried out in the following order:

1. Uninstall the aerator by rotating it clockwise with your hand, wrench and pliers - looking at the faucet from above. If the rubber gasket does not fall out immediately, it must be removed and assessed.
2. By pressing a finger on the side of the jet exit from the body, remove the cylinder with the grids.
3. Having disassembled the cylinder into “spare parts”, clean its individual elements with a jet of water and a needle (toothpicks, thin awl).
4. When all the details of the aerator are cleaned, you can assemble it and install it in place. Do not forget to put a gasket on top of the nozzle - in a word, twist along with it (counterclockwise when viewed from above). You should not tighten the aerator too much - it will be quite enough if you do it simply by hand. If, after opening the water, you see a leak, just take the pliers and a tissue and lightly tighten.

As you can see, the process of cleaning the aerator does not contain any difficulties. The same can be said about replacing the nozzle - unscrew the old one, install a new one, and that's it.

You can clean and replace the aerator at any time with your own hands - there is no need to resort to the services of a professional and not always "cheap" plumber.

More detailed instructions to replace the aerator you will find in our material:.

Aesthetics is in the details

If you have children in your house or you are just a connoisseur of pleasant little things, then you will definitely like the illuminated faucet aerator. The bodies of such nozzles, as a rule, are made of brass with a chrome plating.

The design of illuminated aerators assumes the presence inside the body of a built-in microturbine with an electric generator and a temperature sensor with a system of diodes. Working temperature such a nozzle - up to 60 degrees Celsius.

Note! original design jet controllers with LED illumination does not require additional power supplies. Such aerators work due to the rotation of the turbine.

The illuminated faucet aerator attaches to the faucet spout just as easily as a regular one. Screwed in by hand, no tools needed. When the faucet is opened, the jet is illuminated automatically. Its color, as you might guess, depends entirely on the current temperature of the water:

• at a temperature of less than 29 degrees - green;
• at a temperature of 30-38 - blue;
• at a temperature of 39 and above - red.

In our next article, you will learn how to choose the right good mixer For bathroom: .

Beautiful illumination of luminous aerators will not leave indifferent neither children nor adults.