How to choose the right corrugated board for the fence. What you need to buy for a fence from corrugated board
The construction of fences is a responsible and time-consuming process, but the fence must be not only stable and reliable. A solid, well-built hedge is fashionable and beautiful. In addition, a good fence not only marks the perimeter of the site, but also protects it from wind loads and prying eyes. For the construction of fences, corrugated board is increasingly being chosen, which is a sheet of metal with longitudinal profiling. In order to get a high-quality and solid fence, it is important to choose the right size of the profiled sheet for the fence, its coating and brand, the material must be resistant to atmospheric, mechanical stress. In addition, it is very important to properly mount the fence from corrugated board.
Source yandex.ruWhat is a professional sheet
Decking is a large sheets of different thicknesses, produced by the manufacturer from bent iron without heating on machines - in a cold way. On the surface of each sheet there are stiffening ribs - waves. They are obtained after rolling on the equipment, their height and shape depend on the purpose and type of building material.
The profiled sheet, made according to all standards, has several layers:
low alloy steel base;
zinc layer;
treatment with an anti-corrosion compound;
primer;
decorative coating with a colored polymer, consisting of a mixture of synthetic resins and plastics.
An alternative to the polymer layer is plastisol coating. Such products are characterized by maximum resistance to external influences, but have a high cost.
The corrosion resistance of the material is proportional to the size of the zinc coating layer. Zinc is applied hot or cold, the application density is 100-300 g per 1 m² of steel sheet. The maximum application of the zinc layer significantly improves the consumer qualities of the product.
Advantages and disadvantages of corrugated board
The main advantages of metal profile sheets for the construction of fences include:
Affordable price. Installing a large fence does not require a lot of money.
The surface of the sheet has protective coating e, which prevents corrosion, fading.
continuous life time- up to 50 years.
sheet surface easy to clean from pollution. If damage occurs to the coating, it can be cleaned and covered with a new compound.
Range profiled sheet is wide, you can purchase products of different colors, textures.
metal sheets easy to combine with other materials: stone, brick, cellular polycarbonate.
Lightweight and fast mounting.
Final high strength andreliability fences.
The disadvantage is the impossibility of installation using welding, since the outer coating of the sheet is damaged when exposed to too high temperatures.
What brands and varieties of corrugated board for hedges exist
The profile for the fence is offered in several types and brands, which differ both in composition and characteristics, and in price.
When installed in enclosed areas where wind loading is minimal, products with maximum bending strength may not be used. In an open area, the fence forms a continuous barrier to the winds, so maximum strength is needed.
In the designation of the marking of the corrugated board, the letter is indicated: C, H, HC.
H - bearing material used in the creation of floors and roofs;
C - wall profiled sheet suitable for the construction of fences and walls of outbuildings;
NS is a universal material that finds its application in construction of any type, including the assembly of enclosing structures.
For the installation of fences, material marked "C" is used. It is produced specifically for fences, partitions, walls and differs from sheets "H" in wave height. Products with large waves can withstand maximum loads. In some cases, it is allowed to use products marked "NS", which have a universal purpose.
The letters are followed by numbers by which the consumer can understand the height of the wave, the width of the product and its thickness. For example, if on the label attached to the corrugated board there is such a combination “C 20-1120-0.6”, then the buyer has a wall sample with a section / wave height of 20 mm in front of the buyer. The useful area of the sheet is 1120 mm. The thickness is only 0.6 mm.
Markings and colors of corrugated board for the fence Source es.decorexpro.com
Differences between sheets by marking
There are several of the most popular varieties of corrugated board for the construction of fences.
C-8. The sheet belongs to the budget variety, has a low specific gravity, and is inexpensive.
The wave height is 8 mm.
The distance of the ribs is 6.25 cm.
Useful sheet width 115 cm with a total width of 120 cm.
This type of corrugated board is suitable for installing low fences. If large spans are made during the installation of the fence, the surface may be damaged by impacts and wind loads.
C-10. It has a rectangular relief with a height of 10 mm, which provides sufficient strength with low weight, the step width between the ribs is 4.5 cm. The working width is 110 cm with a total width of 115.5 cm. The sheet thickness is 0.4-0.8 mm. The material has an optimal ratio of price and quality, withstands loads and is not subject to accidental deformations. Suitable for all types of fences.
Profile sheet for the fence marked C-10 Source festima.ru
C-14. The most suitable type of sheet for mounting fences in areas of high wind loads.
The waveform is trapezoidal, its height is 14 mm.
The distance of the stiffeners is 6.5 cm.
The useful width of the profiled sheet for the fence is 106.5 cm with a total width of 113.5 cm.
Sheets are suitable for straight and complex-shaped fencing, gate devices.
C-15. Universal products that are used for fences, roofs, walls. A distinctive feature of this species is a wide rib.
The usable width is 115 cm with a total width of 118 cm.
Wave width - 11.4 cm.
Wave depth 15 mm.
C-18, C-20, C-21 are among the most durable models. They are suitable for mounting fences in difficult operating conditions. The appearance of the products is almost identical, the difference is only in the height of the wave. For fences with a height of more than 250 cm, it is recommended to use only sheets of grade C-21.
Profile sheet for a fence marked C-21 Source legkovmeste.ru
On our site you can find contacts of construction companies that offer the service of building fences and fences. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".
Sheet with a rib height of 3.5 cm and a usable width of 100 cm.
Sheet thickness 0.7-0.9 mm.
The distance of the ribs is 7 cm.
On the outer and inner edges of the sheet there are grooves for fixing to the fixed formwork.
Quality requirements for galvanized steel sheet products, parameters of finished products are presented in GOST 24045-2010.
Larger perimeter fencing will require more high wave sheets, so the need for reinforced decking needs to be realistically assessed. The installation of sheets is overlapped, the correct calculation will allow for a minimum overlap in one wave.
Video description
How to choose the right corrugated board for the fence, look at the video:
In what colors is the corrugated board for the fence
The color in which the profiled sheet is painted does not depend on its properties. The choice is influenced only by the general architectural style of the courtyard and your personal preferences.
Despite the large number of different manufacturers of corrugated board, the colors of the products do not differ. Manufacturers use a single Ral table to designate colors. The exception is the Finnish factory Ruukki, which uses the RR color chart.
The most popular shades are green, brown, rotten cherry, light green. Modern products with Printech coating, imitating the texture of wood, brick, stone, are gaining popularity. Such a fence in combination with stone or brick pillars, forged inserts looks expensive and respectable.
Regardless of the chosen color, under the influence of UV rays, the surface of the corrugated board burns out in the sun. On a light-colored fence, the change in hue is less noticeable.
The matte sheets used to mount the fence look stylish, but require regular cleaning from dirt. On such products, dust and rain splashes leave traces, dirt reduces the life of the polymer layer. The glossy surface retains an attractive appearance longer, dirt and moisture simply roll off it.
What protective coating of a professional sheet is better for a fence
Steel sheets at the base of corrugated board are covered with various compositions. The performance characteristics of the finished product depend on the type and quality of the coating. The main types of profiled sheet protective coatings include four varieties.
Zinc treatment. It is the least durable inexpensive option that is not suitable for fencing private houses, shopping centers, parks. Density of zinc coating on a sheet is 275 g/m. sq., layer thickness not less than 90 microns. Such material is used, as a rule, for temporary structures around construction sites, warehouses. The strength and durability of the products is good, but the appearance is unattractive, and the service life is no more than five years.
Aluzinc treatment. The composition includes 55% aluminum and 45% zinc. The coating is more durable than zinc, the color is matte silver. The appearance of the products is presentable, they can be additionally painted in any color. Such sheets are most often used for industrial fences, but their maximum period of use is ten years.
Polyester processing. The material is highly resistant to weathering, chemical inertness. The layer thickness is 20 microns, the surface is matte or glossy. Sheets get dirty a little, polyester has a dirt-repellent effect. Dust and splashes are easily washed off with water. The range of colors of finished products is quite wide.
Treatment with plastisol or pural. Materials are characterized by maximum resistance to external influences, but finished products with such a coating are expensive. The thickness of the pural layer is 50 µm, the plastisol layer is 200 µm. But taking into account the service life of sheets of about 50 years, the cost of installing a fence is comparable to inexpensive structures.
The type of profiled sheet coating is chosen based on the required service life and financial capabilities.
Video description
What determines the cost of a profile sheet, look at the video:
The main parameters of the profiled sheet for fencing
Installation of profiled sheets can be carried out both vertically and horizontally, the strength of the structure does not change from this. The main indicator that determines the reliability of a fence made of corrugated board is the height of the wave; at low values, the wind load on the sheet is maximum, and a high wave allows it to withstand heavy loads. If you need a strong, stable fence, then it must be installed on the foundation.
When choosing which corrugated board is better for a fence, it should be borne in mind that all of its types are made from sheets 125 cm wide. To obtain waves, the sheets are cold-rolled on special equipment; at the maximum wave height, the width of the finished sheet is minimal.
Most often, a profile for a fence is chosen with a wave height of 8, 10, 21 mm. The latter indicators will provide greater structural rigidity.
It is only important to correctly install the supports, not forgetting that the fence made of corrugated board differs from other types in a very large windage. If for a picket fence or forged spans, the pillars can simply be buried and reinforced with stone backfill, then under the corrugated board they must be buried to a depth greater than the freezing of the soil and concreted.
It should not be overlooked that a fence made of corrugated board is a single monolithic structure and damage to one of its parts can lead to deformation of neighboring ones. When mounting a fence made of corrugated board, count on the fact that it will stand for many years, so do not plant trees with a high height and trunk thickness close to it - they can damage the profiled sheet as they grow. It is better to plant a shrub along the fence or leave a strip of lawn about a meter wide.
How to perform material calculation
To determine the amount of material needed and the cost of the fence, you need to make calculations in advance.
The perimeter of the fence is measured. When constructing a gate, their width is subtracted from the total perimeter.
The resulting value must be divided by the working width of one sheet of the selected brand. If the value turned out to be a fraction, then it must be rounded up to a larger integer.
When purchasing material, it is recommended to provide one spare sheet in case the element is damaged during installation.
If the working width is not known in advance, then measure the total width of the sheet. The resulting value is reduced by the width of two waves, taking into account overlapping installation.
Online fence calculator
To find out the approximate cost of a corrugated fence, use the following calculator:
How to determine the parameters of the fence
Before buying corrugated board for the fence, it is necessary to determine the dimensions of the future fence. Structurally, such a fence consists of sheathing, poles, transverse pipes and fasteners.
Taking into account the average human height of 175-185 cm, the height of the sheet should exceed it by 15-20 cm. The minimum recommended fence height is 2 m. In some cases, fences of 2.5 m or 3 m are mounted. Such a fence will completely hide the courtyard from prying eyes and maximum protection from the wind. Sheets with a height of 3 m are usually made to order.
If the purpose of the fence is to mark the boundaries of the allotment, there are no close neighbors or there is no need to fence off from them with a solid fence, a profiled sheet with a height of 1.8 m is chosen.
The span width is 2.5-3 m, which makes it possible to rationally use the pillars. To calculate the number of pillars, the perimeter of the fence is divided by the width of the span. 3 more pillars are added to the installation of the gate.
When calculating the required height of the pillars, take into account the height of the fence and the fact that they go deep into the ground by 100-150 cm. The height of the corrugated board for the fence is determined by the operating conditions.
The calculation of the number of transverse pipes used to fix the fence is based on the perimeter of the fence. When installing sheets with a height of 2 m, 2 rows of transverse pipes are required.
The number of fasteners is calculated based on the standard of 4-8 elements per 1 m² of fence.
Quality depending on the thickness of the steel sheet at the base of the corrugated board
The thickness of the steel base of the product determines its strength and ability to withstand loads. If the base is less than 0.45 mm, then the fence will not withstand the pressure of the wind and will break through at the attachment points with self-tapping screws. For long-term use, such products are not suitable. It is very difficult to check the thickness of the base in real conditions, so the responsibility for quality lies entirely with the conscientiousness of the manufacturer.
To obtain reliable structures, it is recommended to choose a base of 0.5-1 mm. If it is possible to construct a strong frame, then sheets with a thickness of 0.45 mm are used. Taking into account the deviations allowed by GOST +/- 0.6 mm, the actual thickness of the profiled sheet for the fence can be 0.39 mm.
Sheets made on the basis of European material have the best quality. Foreign manufacturers strictly maintain the regulated thickness, use high-quality coatings. It is not recommended to purchase the cheapest material of unknown production or made in China. Such products serve little.
Video description
See the video for examples of beautiful corrugated fences:
The fence performs not only protective functions, but also fits into the architecture of the building. For maximum decorativeness of the courtyard, you need to use sheets painted on both sides. Their texture and color should be in harmony with the material from which the main structure was built. The coating is chosen without scratches, chips, the surface of the sheet is even without dents. These products will last longer.
The parameters and thickness of the sheet are selected according to the planned load. Deviations from the main parameters according to GOST should not be large, otherwise substandard goods are offered. The edges of the flooring must be smooth without burrs.
An important point is the geometry of the waves. Sheets when overlapping must match exactly. With a loose fit, the structure will turn out to be fragile and require additional lag, which leads to increased costs.
To increase the safety of products during transportation, sheets with a protective film are chosen. After installation, it is removed. The key to high quality is the presence of a manufacturer's warranty, all the necessary certificates of conformity.
Examples of finished corrugated fences in the photo
Conclusion
The use of corrugated board for the fence device allows you to get a reliable design in the shortest possible time. When choosing products, savings should be reasonable and in general, it is better to entrust the selection to a professional. And in order not to waste your time and effort on the construction of a fence made of corrugated board, such work can also be entrusted to specialists. As a result, you will receive a high-quality fence, taking into account all your wishes, which will last for many years without requiring repairs.
The outer fence not only serves as protection against intruders, but also partially performs the function of decorative design of the local area. It is possible to equip such a structure with high quality and inexpensively, if you know which corrugated board is better for the fence. There are also some nuances in using this relatively budget material. Let's try to understand them and take into account the main features during installation and operation.
What should be taken into account?
When choosing a material for a fence, you need to consider not only the appearance and cost, but also the quality of the product. It is necessary to determine which corrugated board is better for the fence at the design stage. Poor quality eventually undergoes peeling and burnout.
When choosing a material, the following factors must also be considered:
- The thickness of the metal.
- Corrugation height.
- Durability of the outer coating of the sheet.
- Dimensions of the elements of the fence.
- Type of fastening and racks.
- Norm in the number of square meters or sheets.
As a result, you will get a simple answer to the question of which fence decking is better to choose: a material that corresponds to the optimal combination of price and quality, as well as to the overall exterior in terms of color and design configuration.
Characteristics of a metal profile
Any kind of material under consideration consists of a thin one. It undergoes a process plus the operations of passivation, priming and final spraying. It can be double or single sided.
For example, the inner side can be coated with a paint layer, and the outer part can consist of polymer components. Such processing allows to achieve good strength and resistance to aggressive external influences. Depending on the quality of processing, the parameter of noise and thermal insulation increases, and the resistance of the structure to frost increases.
Which fence is better to take? Experts recommend using sheets with a thickness of at least 0.5 mm. This is due to the fact that the estimated working life of each one tenth of a millimeter is about five years of operation. When choosing a metal profile for a fence, give priority to the quality of the material and manufacturers, which we will discuss below.
Which corrugated board is better for a fence?
Hundreds of companies produce the material in question. It is not easy to choose sheets that meet the required parameters. Below is a list of popular and trusted manufacturers operating in the domestic market:
- European manufacturers - Myriad, Voest Alpine, Salgitter, Alzelor, Ruukki.
- Domestic brands - Severstal, NLMK, MMK.
- Other manufacturers are Tata Steel from Turkey, Mital Arcelor (Poland).
What thickness of corrugated board is best for a fence? The above firms comply with the required dimensions. And the worst option would be a Chinese counterpart from unknown companies, the thickness of which may not even reach 0.34 millimeters. This design resembles more foil than a full-fledged material for arranging a fence.
Criterias of choice
An important point is the processing of the profile on the machines. This option plays one of the most important roles in which corrugated board is better to use for the fence. A defective batch will last a very short time, which means a lot of trouble associated with the installation and maintenance of the structure.
Another significant parameter is the introduction of zinc. According to GOST, the coating must include at least 275 grams of this component per square meter of sheet. Unfortunately, this aspect is often underestimated by 1.5-2 times. The importance of the component lies in the anti-corrosion properties that determine the working life of the fence.
A few indicative tips on the characteristics of a metal profile:
- The optimal sheet thickness should be at least 0.4 mm.
- The inclusion of zinc - from 140 grams per square meter of material.
- Thicknesses greater than 1.2 millimeters are also impractical due to increased cost along with similar strength.
- It is advisable to choose a product manufactured by a trusted manufacturer.
Profile types
Before deciding which corrugated board is better for a fence, let's dwell on the type of profile. In this case, one of the main characteristics is the height of the wave and its shape. As fences, products with the marking "C" or "CH" are most often used. The height of the corrugation is marked with digital designations, from 8 to 25 millimeters. The large dimensions of the corrugations cause a smaller size of the working plane. For grades C8 and C10, the optimal width will be 1150 mm, for other modifications - no more than 1100 mm.
The strength and rigidity of the sheet depend on the shape of the corrugation. The lowest indicator is noted for the material of category C8. The configuration is divided into several types, namely:
- Wave-type corrugation, reminiscent of building slate in design.
- Trapezoidal configuration (characterized by increased rigidity).
- Cassette form of U-shaped type.
The mass of the sheet of the material under consideration is from 4.5 to 12 kilograms per square meter. This difference is due to a number of characteristics (metal thickness, corrugation height, additional coating).
What kind of corrugated board is better to make a fence?
Determining the answer to this question, it is necessary to consider the types of sheet coverage. There are a lot of options here. Given their features, you can easily choose the best option based on the specific situation. Let's start with the most popular types:
- Hot dip galvanizing method. This design is characterized by good metal protection against corrosion. In this case, the amount of zinc should be at least 140 grams per square meter.
- Aluzinc. A coating similar to the previous version, but significantly superior in strength and durability.
- Lacquer finish. This form of treatment makes it possible to protect the metal due to the formation of a film, and also gives a beautiful appearance to the sheets. However, it is subject to mechanical damage.
- When choosing which fence profile is best from corrugated board, pay attention to It has a wide range of colors and thickness. Below we consider the varieties of this material.
Polymer coatings
Each type of this coating has its own advantages and disadvantages:
- Glossy polyester belongs to the budget category. Its thickness is about 25 microns.
- The matte analogue is almost identical in composition to the above material, its thickness reaches 35 microns.
- Plastisol refers to decorative polymers. The composition of the material includes PVC and plasticizers. The thickness of this option is 200 microns. The covering differs in resistance to atmospheric and mechanical influences. The surface structure can be done with a texture pattern under the skin or with a stroke resembling a birch bark. The coating has its own properties, color palette and thickness standard.
- Pural. Pay attention to this material, because, being interested in what thickness it is better to choose a corrugated board for a fence, many people think that the thicker the sheet, the better. The considered polyurethane coating, although it has a thickness of 50 microns, is highly durable and resistant to aggressive influences of any type.
- PDF (PDF). This material consists of 80 percent polyvinyl chloride and 20 parts acrylic. The coating has a tolerance for temperature changes, does not fade, and is optimally suited for installation on sea coasts.
- "Printek" (Printech). An innovative type of polymer that mimics various natural materials, including wood or stone. The coating is applied by offset printing, thickness - up to 35 microns, resistant to salt, thermal and acid influences.
Rack selection
Which pipes are best for a corrugated fence? Experts recommend using two types of racks. Pipes of profile or round section are suitable as vertical supports. For logs, profile-type elements with a rectangular or square cut are mainly used.
It follows from this that for the type of fence under consideration, two types of rolled metal pipes are needed. This makes it possible to save on the purchase of expensive cross-sectional analogues. It is worth noting that vertical racks should have an increased diameter, and thin options are suitable for horizontal floors.
Rack dimensions
Vertical supports are recommended to be selected with a size of 60 millimeters in diameter. If the height of the fence exceeds 2 meters, this value increases to 80 mm. Round pipe due to the high price for racks is used extremely rarely. Most often, profile analogues with a cross section of 60 * 40 mm or 80 * 60 mm are used.
The total length of the vertical supports is determined taking into account the height of the building. 30 percent of the underground part is added to the total value. The number of pillars is calculated based on the total perimeter, approximately two elements per meter. As a log, only a profile pipe is used. Such elements are much more convenient when installing horizontal ceilings. In addition, fixing the profile itself is facilitated. Log size - 40*20 mm.
Installation Features
Below are the mounting options for corrugated fence posts:
- In the first version, the support is driven into the ground by a third of the length of the rack. This method is fraught with the possibility of the column deviating from the vertical.
- The bored method consists in immersing the rack into a drilled socket. The supports are fixed by filling the shafts with cement mortar. This method of installation is very reliable, but requires a significant amount of time.
- Stuffed option. The post is fixed in the nest with sand and gravel bedding.
- The screw version resembles the method of installing piles. The structure is screwed into the ground like a self-tapping screw.
In conclusion, it can be noted that a fence made of corrugated board is a completely reliable and durable construction, which is distinguished by a variety in color and texture.
Today, serious requirements are imposed on the construction of fences, related not only to strength, stability and reliability, but also to the aesthetics of the fence. The fence should be not only durable, but also attractive, perfectly fitting into the design of the site.
Fence option from corrugated board. For the construction of such a fence, both galvanized corrugated board and polymer coated can be used.
What kind of fence and what characteristics should you pay special attention to? Our experts will give recommendations about from a professional flooring, rules of its installation.
In addition to the high cost of such a fence and problems with its installation (you can’t do without building skills), it will take a lot of time to build a brick, wooden or concrete fence, and some stages involve “wet” work - mixing the mortar in large quantities.
Not only are they installed much faster, their construction does not require special knowledge, expensive inventory. The cost of a profiled sheet will also surprise many - a square meter of corrugated board costs only one hundred and seventy to two hundred and eighty rubles, which is incomparable with the price of the same brick, good wood or concrete mortar.
Profiled options
To begin with, it is worth defining what corrugated board is and why it is so popular as a building material. These are large sheets of various thicknesses obtained from bent iron in a cold way, that is, without heating on special machines.
Such sheets have special stiffening ribs on the surface, which are obtained by rolling on machine tools. The shape and height of such waves can be different, it depends on the type of corrugated board, its purpose.
On both sides, the profiled sheet can have a different protective coating: polymer, plastisol or galvanized.
Let's consider in more detail each of the options.
- Galvanized sheets have a thin layer of hot zinc applied twenty-five to thirty micrometers thick. This is usually used for sheds, the construction of simple fences, ceilings in outbuildings. The cost of this material is usually thirty to forty percent lower than with a paint layer, but this does not affect its quality and durability. For fences, they usually prefer to take corrugated boards that have a galvanized coating on the inside and a polymer layer on the outside.
- Profiled sheeting with a polymer coating is a profiled sheet, on the surface of which a special layer of a mixture of plastic and various synthetic resins is applied. A polymer coating is applied to a galvanized surface, creating not only a decorative layer, but also excellent protection of the material from various damages. Special ingredients are added to the paint, which give the color saturation, brightness. The polymer layer does not fade in the sun, it does not need to be updated over time. It is from this type of corrugated board that it is best to make fences in combination with building materials such as brick, natural stone. The cost of a product with a polymer coating is higher than that of a conventional galvanized one, but the excellent appearance and aesthetics are worth it.
- A corrugated sheet with a plastisol layer is a sheet that is covered with a rather thick layer of plastisol, which is resistant to a wide variety of mechanical damage and adverse operating conditions. The cost of such material is slightly higher than others.
Advantages of corrugated board products
So why is corrugated board better than other building materials? This is due to the numerous advantages of the material, among which the following should be highlighted:
- Quick and easy installation. All works on fencing the land can take only one to three days. The installation itself includes only such stages as marking the line of the future fence, installing support pillars, attaching cross beams, and attaching corrugated board.
- It can be used together with other building materials (brick, concrete, wood, natural stone) - the fence will turn out to be more attractive and original. Thus, it can be delivered in full accordance with the overall design of the site and the style of the house.
- From corrugated board, you can build a fence of almost any height, since the maximum length of the sheet is up to twelve meters. The fence itself can be installed up to five to eight meters high, while its cost will be much lower than that of a similar one from another material, and the quality and strength are much higher.
- When constructing a fence from corrugated board, there is no need to build a preliminary complex scheme. The fence consists only of supporting posts, crossbeams and sheets of corrugated board. When working, you just need to follow the recommendations that are available even to beginners.
- Excellent soundproof properties. The profiled sheet is able to drown out up to seventy percent of the noise that comes from the street.
- Wide range of colors. You can choose any color that will not fade over time and is ideal for the design of your home.
- High performance material. It does not need to be tinted, defects repaired, and cleaning generally comes down to watering from a hose with ordinary water.
Profile marking
When choosing profiled sheets for fences, you should pay attention to the marking of the material, which indicates what type this corrugated board is, what is the wave height, width in millimeters, and the thickness of the steel sheet.
Today profile sheets of the following variations are offered:
- H - bearing profiled sheet, which is used for roofs and ceilings;
- C - wall material that can be used as a material for the construction of a fence, walls of outbuildings.
- NS - universal profiled sheet. It can be used for any type of work, including the installation of fences.
The letter designation is followed by numbers indicating the height of the profile wave, then the value of the sheet width and the thickness of the steel. The profiled sheet must be selected taking into account these parameters.
How to choose a profiled sheet for a future fence?
For the installation of fences, it is recommended to purchase a profiled sheet of type C. The height of its corrugations should be up to twenty-one millimeters, the thickness of the corrugated sheet itself should be from seven tenths of a millimeter (better even more, since the strength of the future fence and its resistance to wind and other loads depend on this) . Don't save here!
So what kind of corrugated board to choose for the fence? Here are some tips to help you choose the right type of material:
- First of all, we check the thickness and quality of the metal, while taking into account that the thickness on the marking is indicated without taking into account the polymer layer. It is best that this value is from seven tenths of a millimeter, but for low fences, you can also take material whose thickness will be about half a millimeter.
- Correctly determine the type of corrugated board. Many people think that it is better to take the H profile, which has a large thickness, but this is not so. The loads on the fence are not so great, and the purchase of such material will be a simple waste of money.
- The edges of the profiled sheet should not have burrs and irregularities, dents and other defects should not be observed on the surface. All sheets in a batch must be identical: the same thickness and color.
When erecting fences, the question arises of choosing the material for the fence. The range of proposals is so great that an inexperienced builder's eyes involuntarily run wide. What to choose: wood or brick? Which fence will look better, and which one will be more economical?
If you do not want to waste time looking for answers, choose a universal solution - a corrugated fence. Such material will make the appearance of the fence neat and save personal funds.
In this article we will try to give complete information about the fence from corrugated board and help you choose it for you.
What is corrugated board
Profiled sheet or corrugated board is a metal sheet created from galvanized steel. The profile repeats the shape of the wave, giving the material additional rigidity. The profiled sheet is perfect for facing houses and fences.
In Russia, a metal profile for a fence has gained wide popularity in the form of a building envelope. The owners of the plots quickly appreciated the durability, strength and cheapness of the material.
Advantages and disadvantages
The main advantages of a metal profile fence include:
- Strength. Thanks to the cold rolling technology, the material has a high rigidity. Massive snowdrifts are not a problem for a profiled sheet.
- Price. The low price per sheet allows you to cover large areas with a fence.
- Reliability. Service life of a professional flooring can reach 60 years.
- Big choice. You can choose any color of corrugated board and texture for the future metal profile fence.
- Protective covering. A special layer is applied to the profile, which preserves the metal from corrosion. Such a fence will not be afraid of snow or rain.
- Timing. Installation of a fence from a professional flooring does not spend much effort. Large areas of the site will be covered in a matter of hours. When using welding, the process will be even faster, but in this case you will have to observe some nuances.
The disadvantages include the simple appearance of the design. Some types of metal profiles look like something rough and empty. In practice, this problem can be easily solved by selecting the external finish of profiled sheets.
Do not forget that corrugated board is a durable material. So much so that it is not recommended to plant trees or shrubs next to the wall. In the future, they can damage the integrity of the structure with their roots.
Profiled steel does not fit well with high welding temperatures. If you decide to solder, after all the work you need to lubricate the seams with an anti-corrosion coating. Otherwise, the fence will become unusable in a short time.
Types of metal profile
There are various types of corrugated board for the fence. The main parameter for the difference between fences is the height of the wave. The profiled sheet for the fence is marked "C" and the number corresponding to this height. The higher the number of the brand of corrugated board, the greater the thickness and stability of the fence.
Consider each type of fence made of corrugated board separately.
Profiled C8
The wave size of only 8 mm makes this corrugated board the lightest and cheapest of the presented brands. With such a sheet, you can save a lot when building large-scale structures. However, the small thickness of the steel sheet makes it unsuitable for erecting long spans or high fences. Most often, this type of fence made of corrugated board is used for the exterior decoration of buildings.
Profiled C10
One of the most cost-effective options when building a wall. It surpasses C8 in its strength characteristics, but at the same time it costs a little more. Such a fence can withstand strong gusts of wind or high snowdrifts.
Profiled C14
Popular fence brand. The rigid steel sheet will provide protection from deformation, and the wave shape is perfect for fencing the site. A good combination of price and quality, as well as appearance. This type of metal profile fence is ideally combined with a brick foundation.
Profiled C15
Such a fence differs from all other forms by a wide edge. In appearance, this will make it more “smooth”, without unnecessary irregularities. The cost of such iron will be slightly more, while the technology for installing sheets does not differ from thinner brands.
Profiled C18, C20 and C21
The highest stiffeners allow you to achieve maximum strength of the fence. A wide steel profile does not limit the owner of such a fence either in height or in the length of the span. It is worth noting that the structures of profiled sheets of this type look unusual for the layman. The foundation will be able to brighten up the external roughness of such a fence.
What professional sheet is needed for the fence
To understand which corrugated board is better to choose for the fence, let's delve into the properties of the steel sheet.
For the correct selection, it is necessary to take into account all aspects of the future project: the height of the fence from the corrugated board, the width of the spans between the piles, the perimeter of the fenced area. Only knowing all these parameters, you can accurately determine the desired type of profiled sheet.
How to choose the thickness
The wave height is the main parameter of the profiled sheet thickness. The price of the structure, its strength depends on it.
There are three options for selecting the thickness according to the grades of the fence:
- For fences up to 2 meters high, as well as in areas without strong gusts of wind, types C8 - C10 are suitable. They are economical and will not require a lot of expenses even in large areas.
- If you need a high fence with a wide span, grades C 14-18 are better suited. Such a wall will reliably protect against wind effects or other physical influences.
- The corrugated board for the fence of the C20 or C21 brand will help in cases where it is required to ensure maximum strength of the fence.
In addition to high ribs, a strong sheet should have a thickness of 0.45 mm or more. It is this minimum that will not allow easy deformation of steel.
How to check the thickness
As mentioned above, thickness is one of the most important factors when choosing a metal profile for a fence. However, it can be problematic to check it with an accuracy of hundredths of a millimeter.
Even a special tool, a micrometer, does not guarantee the thickness of the steel in all parts of the future fence.
In this case, it remains to rely only on the honesty of the fence manufacturers from the profiled sheet.
How to perform material calculation
It should be noted that the thickness of the metal profile remains not the only parameter for calculating the number of sheets.
The width of the profiled sheet also affects the overall construction costs. The standard width of a rolling fox is 125 centimeters. At the same time, during the formation of waves, it can proportionally decrease. Therefore, the higher the sheet waves and the stiffer the structure, the more sheets will be spent on the same span.
The choice of grades C18 - C21 can increase the cost of the wall several times.
Which color to choose
To date, the profiled sheet can be painted in any color corresponding to the German RAL color standard. This opens up huge opportunities for the external design of the protected area.
Such varnishes are ideal for external weather conditions, do not destroy the metal and retain their shade for a long time.
Which protective coating is best
For a long service life of corrugated board fencing, it should be treated with a special protective coating. It will protect steel from corrosion and improve the decorative appearance of the fence.
It is worth considering the price, quality, protective properties of the applied layer. The combination of an expensive metal profile with a cheap protective layer is tantamount to applying an elite varnish to an inconspicuous fence.
Let's analyze the advantages and disadvantages of each coating for corrugated board.
Zinc coating
Simple galvanized steel provides little protection for the structure, but is inexpensive. The coating is not pleasing to the eye due to the metallic reflection effect. However, such a professional sheet is more suitable than others for building fences over an area of more than a hectare.
If decor is not important during construction, then use zinc as the material of the outer layer. Such fences are often found around industrial zones, warehouses, temporary structures.
Aluzinc coating
The coating consists of 45% zinc and 55% aluminium. Such a composition preserves the sheet from external influences, while it looks a little better than galvanized. Aluzinc coating is used for large-scale fencing, usually around industrial buildings.
Unlike zinc, aluzinc can be painted with special paints for metal based on acrylic or oil. In this case, their use will increase the cost of the fence.
Polyester cover
For fences in cottages or private areas, a polyester coating is suitable. The difference between the polymer layer is that it easily tolerates physical influences and looks pleasant, like a gloss. Due to the smooth surface structure, dirt or dust is easily washed off from it.
Polyester is an inexpensive material. By paying an average price, the owner of the house will receive a fence that is durable, presentable and easy to use.
Plastisol or pural coating
Plastisol and pural 100 percent protect the material in bad weather or physical contact. The rough surface structure does not retain dirt, dust and water. The structure will look like new for decades.
Plastisol and pural are more expensive than other coatings presented. At the same time, experts note that the final profitability of such sheets is higher than that of cheap options. Such a fence is most often used in luxury real estate construction projects.
Without decorative coating
If you plan to fence a wide area of the site or an industrial enterprise, it will not be economical to use decorative metal. This applies to situations where the wall is erected temporarily.
Zinc and aluzinc coating will fit into a possible landscape, and most importantly, will not hit your pocket.
With decorative coating
Manufacturers of profiled sheets offer a range of colors and designs. In many building projects, profiled sheets are successfully used, up to interior decoration.
Increasingly, there are fences painted to look like wood, brickwork, or stone backfill. Such a striking resemblance is achieved through modern methods of high-tech metal painting. From afar, such structures are indistinguishable from natural materials.
To give the fence additional aesthetics, decorative strips, brick columns, and forged accessories are used.
Conclusion
To date, corrugated board has become a significant material for owners throughout Russia. It is used everywhere, it is unpretentious to our climate and easily acquires a neat appearance.
Often the metal profile is underestimated because of its simplicity and affordable price. Now we have found out that even a profiled sheet can be elite, even expensive, it also needs to be looked after. A profiled sheet wall is an excellent choice for a beginner who is just starting his journey as a successful site owner.
The design of the fence made of corrugated board is a solid fence made of profiled metal sheet. The peculiarity of this design of the fence provides for an increased level of “sail”, therefore, the overall durability of the fence, its protective properties and, of course, its cost depend on the characteristics of the material. What kind of corrugated board to choose for the fence? The answer to this question lies in determining the specific operating conditions, since the modifications of the corrugated board differ from each other in various mechanical and atmospheric stability.
Grades of corrugated board
In most cases, when erecting fences and fences, corrugated sheets are installed in a vertical position, which provides a certain distribution of external forces, namely, the weight of each individual sheet is minimally affected by the plane of the fence itself, while the so-called "snow and rain" loads are almost completely absent. . Corrugated fences installed in open areas, among other things, are also exposed to wind. In some cases, wind loads can be very strong, since the fence is the only and complete barrier to air flow.
Wall-type corrugated board is used for fences. In their marking, such sheets have the letter "C".
The main difference between wall corrugated board and roofing sheet is the height of the wave, which in the marking is determined by the number immediately following the letter designation. The higher the number, the greater the wave height and the higher the rigidity of the sheet, which, in turn, provides more reliable protection of the fence from possible loads.
- Profiled C8- initially, corrugated board of this brand was supposed to be used for wall cladding, since it has a very low wave - 8 mm. Sheet C8 is distinguished by its low specific weight and low cost, which ultimately translates into significant cost savings when installing a long fence. In order to calculate the cost of the proposed fence, you can use the calculator on our website. However, the strength of the fence from the C8 profiled sheet is not too high, so it is not recommended to use it for high fences with long spans.
- Profiled C10- a good option in terms of price / quality ratio. Sufficiently strong sheet with a strict wave shape. Having a small specific gravity, such material provides good protective properties to the entire fence. Of course, using a C10 profiled sheet will cost you a little more than using a C8 sheet, but at the same time, the former is less susceptible to random deformations, which ensures that an excellent appearance is maintained for many years.
- Profiled C14- one of the most convenient brands for installing fences. Such a corrugated board reliably protects against mechanical and wind loads. At the same time, C14 sheets after installation look very presentable both on flat areas and on planes with a complex configuration.
- Profiled C15- easily recognizable by the wide stiffener. Starting with this brand, there is a line of corrugated boards that can be used for roofing and facades. On the fence, such a sheet looks quite unusual, but at the same time very original.
- Profiled C18, C20, C21- the most durable brands, suitable not only for fences, but also for roofing. They can be used in the most severe climatic conditions. If you need to build a fence with a height of more than 2.5 m, then C21 grade corrugated board would be the best option.
Each brand of corrugated board has individual profile parameters. Below is a table of profile parameters for C8 grade corrugated board: 
BUT- overall width
B- mounting width
S- corrugation pitch
h- profile height
t- profile thickness
a, b- shelf width
Features of choosing a brand of corrugated board
The selection of the brand of corrugated board should be carried out based on the landscape, as well as focusing on the climatic features of your area. If the fence is supposed to be of low height and will be located in an area with low wind loads, then we recommend using corrugated board grades C8 - C10. When installing a fence of greater height and in conditions where increased wind loads may occur, we recommend using C14, C15 or C18 sheets. In the event that extra strength is required, it is best to use C20 and C21 sheets.
When choosing corrugated board for a fence, it is not enough to rely only on its brand - you need to consider other characteristics of the sheet. For example, corrugated board is made of sheet metal with a width of 1.25 m. Such material is rolled on special mills. In this case, the overall width of the sheet is reduced due to the height of the ribs: so, the higher the height of the profile, the narrower the sheet will be. Of course, when installing one element, this is not such an important parameter, but if the length of the fence is 120 meters or more, the importance of the sheet width is very noticeable.
Protective coating for corrugated board
Decking is a complex structure consisting of several layers. The base of the corrugated board is a steel sheet on which a protective coating is applied.
Types of protective coatings:
- Zinc. The cheapest and least reliable type of coverage. Very rarely, such a sheet is used for fencing commercial establishments and summer cottages. However, it can often be seen on the fences of warehouses, construction sites and as temporary fences. Such a sheet does not differ in a presentable appearance, strength and durability.
- Aluzinc. Chemical coating based on zinc and aluminum. Such sheets are also more used in industry, but at the same time they have a more presentable appearance. Sheets based on aluzinc can additionally be painted with oil and alkyd paints for metal.
- Polyester. The best option for arranging a fence around a summer cottage or a private house. The material with such a coating is very resistant to various atmospheric influences, and also has dirt-repellent properties.
- Plastisol or pural. A sheet with such a coating is the most expensive, but at the same time the most resistant. Often such sheets are used in elite construction. The surface of the sheet looks perfect for almost the entire period of its operation, and this is decades.
Thickness and quality of steel sheet
What thickness to choose corrugated board for the fence so that it lasts a long time and reliably? The strength of the entire fence depends on this parameter. If the thickness is less than 0.45 mm, then such a sheet can be easily deformed under the influence of wind load. In the event that you plan to operate the fence for a long period, the thickness of the sheet should be from 0.45 mm or more.
An excellent ratio of price and quality is distinguished by the Russian brand NLMK. Novolipetsk Iron and Steel Works offers corrugated board with a zinc thickness of 140 g / meter, which is optimal for the construction of fences, gates and gates.
Coloring of corrugated board for the fence
Now you can order corrugated board with a color coating that meets almost the entire spectrum of RAL. What color of corrugated board to choose for the fence? The most correct solution to this issue is the selection of the color of the corrugated board in accordance with the color scheme of the buildings located near the future fence, as well as the surrounding landscape.
We are ready to offer the best corrugated board from leading manufacturers, however, if you have not yet decided on the choice of color, the experience of our customers may help you. When ordering corrugated board, please note that the standard colors “RAL 6005 green”, “3005 red”, “brown 8017” are always in stock, you don’t have to wait for them, like other, more original colors, which will also cost an order of magnitude more expensive.